google-api-ruby-client/generated/google/apis/sheets_v4/classes.rb

# Copyright 2015 Google Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

require 'date'
require 'google/apis/core/base_service'
require 'google/apis/core/json_representation'
require 'google/apis/core/hashable'
require 'google/apis/errors'

module Google
  module Apis
    module SheetsV4
      
      # Adds a new banded range to the spreadsheet.
      class AddBandingRequest
        include Google::Apis::Core::Hashable
      
        # A banded (alternating colors) range in a sheet.
        # Corresponds to the JSON property `bandedRange`
        # @return [Google::Apis::SheetsV4::BandedRange]
        attr_accessor :banded_range
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @banded_range = args[:banded_range] if args.key?(:banded_range)
        end
      end
      
      # The result of adding a banded range.
      class AddBandingResponse
        include Google::Apis::Core::Hashable
      
        # A banded (alternating colors) range in a sheet.
        # Corresponds to the JSON property `bandedRange`
        # @return [Google::Apis::SheetsV4::BandedRange]
        attr_accessor :banded_range
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @banded_range = args[:banded_range] if args.key?(:banded_range)
        end
      end
      
      # Adds a chart to a sheet in the spreadsheet.
      class AddChartRequest
        include Google::Apis::Core::Hashable
      
        # A chart embedded in a sheet.
        # Corresponds to the JSON property `chart`
        # @return [Google::Apis::SheetsV4::EmbeddedChart]
        attr_accessor :chart
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @chart = args[:chart] if args.key?(:chart)
        end
      end
      
      # The result of adding a chart to a spreadsheet.
      class AddChartResponse
        include Google::Apis::Core::Hashable
      
        # A chart embedded in a sheet.
        # Corresponds to the JSON property `chart`
        # @return [Google::Apis::SheetsV4::EmbeddedChart]
        attr_accessor :chart
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @chart = args[:chart] if args.key?(:chart)
        end
      end
      
      # Adds a new conditional format rule at the given index. All subsequent rules'
      # indexes are incremented.
      class AddConditionalFormatRuleRequest
        include Google::Apis::Core::Hashable
      
        # The zero-based index where the rule should be inserted.
        # Corresponds to the JSON property `index`
        # @return [Fixnum]
        attr_accessor :index
      
        # A rule describing a conditional format.
        # Corresponds to the JSON property `rule`
        # @return [Google::Apis::SheetsV4::ConditionalFormatRule]
        attr_accessor :rule
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @index = args[:index] if args.key?(:index)
          @rule = args[:rule] if args.key?(:rule)
        end
      end
      
      # Adds a data source. After the data source is added successfully, an associated
      # DATA_SOURCE sheet is created and an execution is triggered to refresh the
      # sheet to read data from the data source. The request requires an additional `
      # bigquery.readonly` OAuth scope.
      class AddDataSourceRequest
        include Google::Apis::Core::Hashable
      
        # Information about an external data source in the spreadsheet.
        # Corresponds to the JSON property `dataSource`
        # @return [Google::Apis::SheetsV4::DataSource]
        attr_accessor :data_source
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @data_source = args[:data_source] if args.key?(:data_source)
        end
      end
      
      # The result of adding a data source.
      class AddDataSourceResponse
        include Google::Apis::Core::Hashable
      
        # The data execution status. A data execution is created to sync a data source
        # object with the latest data from a DataSource. It is usually scheduled to run
        # at background, you can check its state to tell if an execution completes There
        # are several scenarios where a data execution is triggered to run: * Adding a
        # data source creates an associated data source sheet as well as a data
        # execution to sync the data from the data source to the sheet. * Updating a
        # data source creates a data execution to refresh the associated data source
        # sheet similarly. * You can send refresh request to explicitly refresh one or
        # multiple data source objects.
        # Corresponds to the JSON property `dataExecutionStatus`
        # @return [Google::Apis::SheetsV4::DataExecutionStatus]
        attr_accessor :data_execution_status
      
        # Information about an external data source in the spreadsheet.
        # Corresponds to the JSON property `dataSource`
        # @return [Google::Apis::SheetsV4::DataSource]
        attr_accessor :data_source
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @data_execution_status = args[:data_execution_status] if args.key?(:data_execution_status)
          @data_source = args[:data_source] if args.key?(:data_source)
        end
      end
      
      # Creates a group over the specified range. If the requested range is a superset
      # of the range of an existing group G, then the depth of G is incremented and
      # this new group G' has the depth of that group. For example, a group [C:D,
      # depth 1] + [B:E] results in groups [B:E, depth 1] and [C:D, depth 2]. If the
      # requested range is a subset of the range of an existing group G, then the
      # depth of the new group G' becomes one greater than the depth of G. For example,
      # a group [B:E, depth 1] + [C:D] results in groups [B:E, depth 1] and [C:D,
      # depth 2]. If the requested range starts before and ends within, or starts
      # within and ends after, the range of an existing group G, then the range of the
      # existing group G becomes the union of the ranges, and the new group G' has
      # depth one greater than the depth of G and range as the intersection of the
      # ranges. For example, a group [B:D, depth 1] + [C:E] results in groups [B:E,
      # depth 1] and [C:D, depth 2].
      class AddDimensionGroupRequest
        include Google::Apis::Core::Hashable
      
        # A range along a single dimension on a sheet. All indexes are zero-based.
        # Indexes are half open: the start index is inclusive and the end index is
        # exclusive. Missing indexes indicate the range is unbounded on that side.
        # Corresponds to the JSON property `range`
        # @return [Google::Apis::SheetsV4::DimensionRange]
        attr_accessor :range
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @range = args[:range] if args.key?(:range)
        end
      end
      
      # The result of adding a group.
      class AddDimensionGroupResponse
        include Google::Apis::Core::Hashable
      
        # All groups of a dimension after adding a group to that dimension.
        # Corresponds to the JSON property `dimensionGroups`
        # @return [Array<Google::Apis::SheetsV4::DimensionGroup>]
        attr_accessor :dimension_groups
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @dimension_groups = args[:dimension_groups] if args.key?(:dimension_groups)
        end
      end
      
      # Adds a filter view.
      class AddFilterViewRequest
        include Google::Apis::Core::Hashable
      
        # A filter view.
        # Corresponds to the JSON property `filter`
        # @return [Google::Apis::SheetsV4::FilterView]
        attr_accessor :filter
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @filter = args[:filter] if args.key?(:filter)
        end
      end
      
      # The result of adding a filter view.
      class AddFilterViewResponse
        include Google::Apis::Core::Hashable
      
        # A filter view.
        # Corresponds to the JSON property `filter`
        # @return [Google::Apis::SheetsV4::FilterView]
        attr_accessor :filter
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @filter = args[:filter] if args.key?(:filter)
        end
      end
      
      # Adds a named range to the spreadsheet.
      class AddNamedRangeRequest
        include Google::Apis::Core::Hashable
      
        # A named range.
        # Corresponds to the JSON property `namedRange`
        # @return [Google::Apis::SheetsV4::NamedRange]
        attr_accessor :named_range
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @named_range = args[:named_range] if args.key?(:named_range)
        end
      end
      
      # The result of adding a named range.
      class AddNamedRangeResponse
        include Google::Apis::Core::Hashable
      
        # A named range.
        # Corresponds to the JSON property `namedRange`
        # @return [Google::Apis::SheetsV4::NamedRange]
        attr_accessor :named_range
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @named_range = args[:named_range] if args.key?(:named_range)
        end
      end
      
      # Adds a new protected range.
      class AddProtectedRangeRequest
        include Google::Apis::Core::Hashable
      
        # A protected range.
        # Corresponds to the JSON property `protectedRange`
        # @return [Google::Apis::SheetsV4::ProtectedRange]
        attr_accessor :protected_range
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @protected_range = args[:protected_range] if args.key?(:protected_range)
        end
      end
      
      # The result of adding a new protected range.
      class AddProtectedRangeResponse
        include Google::Apis::Core::Hashable
      
        # A protected range.
        # Corresponds to the JSON property `protectedRange`
        # @return [Google::Apis::SheetsV4::ProtectedRange]
        attr_accessor :protected_range
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @protected_range = args[:protected_range] if args.key?(:protected_range)
        end
      end
      
      # Adds a new sheet. When a sheet is added at a given index, all subsequent
      # sheets' indexes are incremented. To add an object sheet, use AddChartRequest
      # instead and specify EmbeddedObjectPosition.sheetId or EmbeddedObjectPosition.
      # newSheet.
      class AddSheetRequest
        include Google::Apis::Core::Hashable
      
        # Properties of a sheet.
        # Corresponds to the JSON property `properties`
        # @return [Google::Apis::SheetsV4::SheetProperties]
        attr_accessor :properties
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @properties = args[:properties] if args.key?(:properties)
        end
      end
      
      # The result of adding a sheet.
      class AddSheetResponse
        include Google::Apis::Core::Hashable
      
        # Properties of a sheet.
        # Corresponds to the JSON property `properties`
        # @return [Google::Apis::SheetsV4::SheetProperties]
        attr_accessor :properties
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @properties = args[:properties] if args.key?(:properties)
        end
      end
      
      # Adds a slicer to a sheet in the spreadsheet.
      class AddSlicerRequest
        include Google::Apis::Core::Hashable
      
        # A slicer in a sheet.
        # Corresponds to the JSON property `slicer`
        # @return [Google::Apis::SheetsV4::Slicer]
        attr_accessor :slicer
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @slicer = args[:slicer] if args.key?(:slicer)
        end
      end
      
      # The result of adding a slicer to a spreadsheet.
      class AddSlicerResponse
        include Google::Apis::Core::Hashable
      
        # A slicer in a sheet.
        # Corresponds to the JSON property `slicer`
        # @return [Google::Apis::SheetsV4::Slicer]
        attr_accessor :slicer
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @slicer = args[:slicer] if args.key?(:slicer)
        end
      end
      
      # Adds new cells after the last row with data in a sheet, inserting new rows
      # into the sheet if necessary.
      class AppendCellsRequest
        include Google::Apis::Core::Hashable
      
        # The fields of CellData that should be updated. At least one field must be
        # specified. The root is the CellData; 'row.values.' should not be specified. A
        # single `"*"` can be used as short-hand for listing every field.
        # Corresponds to the JSON property `fields`
        # @return [String]
        attr_accessor :fields
      
        # The data to append.
        # Corresponds to the JSON property `rows`
        # @return [Array<Google::Apis::SheetsV4::RowData>]
        attr_accessor :rows
      
        # The sheet ID to append the data to.
        # Corresponds to the JSON property `sheetId`
        # @return [Fixnum]
        attr_accessor :sheet_id
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @fields = args[:fields] if args.key?(:fields)
          @rows = args[:rows] if args.key?(:rows)
          @sheet_id = args[:sheet_id] if args.key?(:sheet_id)
        end
      end
      
      # Appends rows or columns to the end of a sheet.
      class AppendDimensionRequest
        include Google::Apis::Core::Hashable
      
        # Whether rows or columns should be appended.
        # Corresponds to the JSON property `dimension`
        # @return [String]
        attr_accessor :dimension
      
        # The number of rows or columns to append.
        # Corresponds to the JSON property `length`
        # @return [Fixnum]
        attr_accessor :length
      
        # The sheet to append rows or columns to.
        # Corresponds to the JSON property `sheetId`
        # @return [Fixnum]
        attr_accessor :sheet_id
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @dimension = args[:dimension] if args.key?(:dimension)
          @length = args[:length] if args.key?(:length)
          @sheet_id = args[:sheet_id] if args.key?(:sheet_id)
        end
      end
      
      # The response when updating a range of values in a spreadsheet.
      class AppendValuesResponse
        include Google::Apis::Core::Hashable
      
        # The spreadsheet the updates were applied to.
        # Corresponds to the JSON property `spreadsheetId`
        # @return [String]
        attr_accessor :spreadsheet_id
      
        # The range (in A1 notation) of the table that values are being appended to (
        # before the values were appended). Empty if no table was found.
        # Corresponds to the JSON property `tableRange`
        # @return [String]
        attr_accessor :table_range
      
        # The response when updating a range of values in a spreadsheet.
        # Corresponds to the JSON property `updates`
        # @return [Google::Apis::SheetsV4::UpdateValuesResponse]
        attr_accessor :updates
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @spreadsheet_id = args[:spreadsheet_id] if args.key?(:spreadsheet_id)
          @table_range = args[:table_range] if args.key?(:table_range)
          @updates = args[:updates] if args.key?(:updates)
        end
      end
      
      # Fills in more data based on existing data.
      class AutoFillRequest
        include Google::Apis::Core::Hashable
      
        # A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
        # the start index is inclusive and the end index is exclusive -- [start_index,
        # end_index). Missing indexes indicate the range is unbounded on that side. For
        # example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
        # start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
        # 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
        # start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
        # sheet_id:0` The start index must always be less than or equal to the end index.
        # If the start index equals the end index, then the range is empty. Empty
        # ranges are typically not meaningful and are usually rendered in the UI as `#
        # REF!`.
        # Corresponds to the JSON property `range`
        # @return [Google::Apis::SheetsV4::GridRange]
        attr_accessor :range
      
        # A combination of a source range and how to extend that source.
        # Corresponds to the JSON property `sourceAndDestination`
        # @return [Google::Apis::SheetsV4::SourceAndDestination]
        attr_accessor :source_and_destination
      
        # True if we should generate data with the "alternate" series. This differs
        # based on the type and amount of source data.
        # Corresponds to the JSON property `useAlternateSeries`
        # @return [Boolean]
        attr_accessor :use_alternate_series
        alias_method :use_alternate_series?, :use_alternate_series
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @range = args[:range] if args.key?(:range)
          @source_and_destination = args[:source_and_destination] if args.key?(:source_and_destination)
          @use_alternate_series = args[:use_alternate_series] if args.key?(:use_alternate_series)
        end
      end
      
      # Automatically resizes one or more dimensions based on the contents of the
      # cells in that dimension.
      class AutoResizeDimensionsRequest
        include Google::Apis::Core::Hashable
      
        # A range along a single dimension on a DATA_SOURCE sheet.
        # Corresponds to the JSON property `dataSourceSheetDimensions`
        # @return [Google::Apis::SheetsV4::DataSourceSheetDimensionRange]
        attr_accessor :data_source_sheet_dimensions
      
        # A range along a single dimension on a sheet. All indexes are zero-based.
        # Indexes are half open: the start index is inclusive and the end index is
        # exclusive. Missing indexes indicate the range is unbounded on that side.
        # Corresponds to the JSON property `dimensions`
        # @return [Google::Apis::SheetsV4::DimensionRange]
        attr_accessor :dimensions
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @data_source_sheet_dimensions = args[:data_source_sheet_dimensions] if args.key?(:data_source_sheet_dimensions)
          @dimensions = args[:dimensions] if args.key?(:dimensions)
        end
      end
      
      # A banded (alternating colors) range in a sheet.
      class BandedRange
        include Google::Apis::Core::Hashable
      
        # The id of the banded range.
        # Corresponds to the JSON property `bandedRangeId`
        # @return [Fixnum]
        attr_accessor :banded_range_id
      
        # Properties referring a single dimension (either row or column). If both
        # BandedRange.row_properties and BandedRange.column_properties are set, the fill
        # colors are applied to cells according to the following rules: * header_color
        # and footer_color take priority over band colors. * first_band_color takes
        # priority over second_band_color. * row_properties takes priority over
        # column_properties. For example, the first row color takes priority over the
        # first column color, but the first column color takes priority over the second
        # row color. Similarly, the row header takes priority over the column header in
        # the top left cell, but the column header takes priority over the first row
        # color if the row header is not set.
        # Corresponds to the JSON property `columnProperties`
        # @return [Google::Apis::SheetsV4::BandingProperties]
        attr_accessor :column_properties
      
        # A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
        # the start index is inclusive and the end index is exclusive -- [start_index,
        # end_index). Missing indexes indicate the range is unbounded on that side. For
        # example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
        # start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
        # 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
        # start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
        # sheet_id:0` The start index must always be less than or equal to the end index.
        # If the start index equals the end index, then the range is empty. Empty
        # ranges are typically not meaningful and are usually rendered in the UI as `#
        # REF!`.
        # Corresponds to the JSON property `range`
        # @return [Google::Apis::SheetsV4::GridRange]
        attr_accessor :range
      
        # Properties referring a single dimension (either row or column). If both
        # BandedRange.row_properties and BandedRange.column_properties are set, the fill
        # colors are applied to cells according to the following rules: * header_color
        # and footer_color take priority over band colors. * first_band_color takes
        # priority over second_band_color. * row_properties takes priority over
        # column_properties. For example, the first row color takes priority over the
        # first column color, but the first column color takes priority over the second
        # row color. Similarly, the row header takes priority over the column header in
        # the top left cell, but the column header takes priority over the first row
        # color if the row header is not set.
        # Corresponds to the JSON property `rowProperties`
        # @return [Google::Apis::SheetsV4::BandingProperties]
        attr_accessor :row_properties
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @banded_range_id = args[:banded_range_id] if args.key?(:banded_range_id)
          @column_properties = args[:column_properties] if args.key?(:column_properties)
          @range = args[:range] if args.key?(:range)
          @row_properties = args[:row_properties] if args.key?(:row_properties)
        end
      end
      
      # Properties referring a single dimension (either row or column). If both
      # BandedRange.row_properties and BandedRange.column_properties are set, the fill
      # colors are applied to cells according to the following rules: * header_color
      # and footer_color take priority over band colors. * first_band_color takes
      # priority over second_band_color. * row_properties takes priority over
      # column_properties. For example, the first row color takes priority over the
      # first column color, but the first column color takes priority over the second
      # row color. Similarly, the row header takes priority over the column header in
      # the top left cell, but the column header takes priority over the first row
      # color if the row header is not set.
      class BandingProperties
        include Google::Apis::Core::Hashable
      
        # Represents a color in the RGBA color space. This representation is designed
        # for simplicity of conversion to/from color representations in various
        # languages over compactness; for example, the fields of this representation can
        # be trivially provided to the constructor of "java.awt.Color" in Java; it can
        # also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
        # method in iOS; and, with just a little work, it can be easily formatted into a
        # CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
        # information about the absolute color space that should be used to interpret
        # the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
        # applications SHOULD assume the sRGB color space. Note: when color equality
        # needs to be decided, implementations, unless documented otherwise, will treat
        # two colors to be equal if all their red, green, blue and alpha values each
        # differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
        # public static java.awt.Color fromProto(Color protocolor) ` float alpha =
        # protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
        # java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
        # ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
        # float) color.getRed(); float green = (float) color.getGreen(); float blue = (
        # float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
        # = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
        # .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
        # ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
        # denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
        # Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
        # protocolor red]; float green = [protocolor green]; float blue = [protocolor
        # blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
        # alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
        # colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
        # UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
        # green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
        # alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
        # blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
        # [result autorelease]; return result; ` // ... Example (JavaScript): // ...
        # var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
        # var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
        # var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
        # var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
        # rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
        # 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
        # ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
        # ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
        # hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
        # var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
        # resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
        # join(''); `; // ...
        # Corresponds to the JSON property `firstBandColor`
        # @return [Google::Apis::SheetsV4::Color]
        attr_accessor :first_band_color
      
        # A color value.
        # Corresponds to the JSON property `firstBandColorStyle`
        # @return [Google::Apis::SheetsV4::ColorStyle]
        attr_accessor :first_band_color_style
      
        # Represents a color in the RGBA color space. This representation is designed
        # for simplicity of conversion to/from color representations in various
        # languages over compactness; for example, the fields of this representation can
        # be trivially provided to the constructor of "java.awt.Color" in Java; it can
        # also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
        # method in iOS; and, with just a little work, it can be easily formatted into a
        # CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
        # information about the absolute color space that should be used to interpret
        # the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
        # applications SHOULD assume the sRGB color space. Note: when color equality
        # needs to be decided, implementations, unless documented otherwise, will treat
        # two colors to be equal if all their red, green, blue and alpha values each
        # differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
        # public static java.awt.Color fromProto(Color protocolor) ` float alpha =
        # protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
        # java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
        # ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
        # float) color.getRed(); float green = (float) color.getGreen(); float blue = (
        # float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
        # = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
        # .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
        # ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
        # denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
        # Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
        # protocolor red]; float green = [protocolor green]; float blue = [protocolor
        # blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
        # alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
        # colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
        # UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
        # green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
        # alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
        # blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
        # [result autorelease]; return result; ` // ... Example (JavaScript): // ...
        # var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
        # var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
        # var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
        # var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
        # rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
        # 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
        # ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
        # ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
        # hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
        # var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
        # resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
        # join(''); `; // ...
        # Corresponds to the JSON property `footerColor`
        # @return [Google::Apis::SheetsV4::Color]
        attr_accessor :footer_color
      
        # A color value.
        # Corresponds to the JSON property `footerColorStyle`
        # @return [Google::Apis::SheetsV4::ColorStyle]
        attr_accessor :footer_color_style
      
        # Represents a color in the RGBA color space. This representation is designed
        # for simplicity of conversion to/from color representations in various
        # languages over compactness; for example, the fields of this representation can
        # be trivially provided to the constructor of "java.awt.Color" in Java; it can
        # also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
        # method in iOS; and, with just a little work, it can be easily formatted into a
        # CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
        # information about the absolute color space that should be used to interpret
        # the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
        # applications SHOULD assume the sRGB color space. Note: when color equality
        # needs to be decided, implementations, unless documented otherwise, will treat
        # two colors to be equal if all their red, green, blue and alpha values each
        # differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
        # public static java.awt.Color fromProto(Color protocolor) ` float alpha =
        # protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
        # java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
        # ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
        # float) color.getRed(); float green = (float) color.getGreen(); float blue = (
        # float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
        # = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
        # .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
        # ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
        # denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
        # Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
        # protocolor red]; float green = [protocolor green]; float blue = [protocolor
        # blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
        # alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
        # colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
        # UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
        # green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
        # alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
        # blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
        # [result autorelease]; return result; ` // ... Example (JavaScript): // ...
        # var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
        # var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
        # var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
        # var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
        # rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
        # 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
        # ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
        # ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
        # hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
        # var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
        # resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
        # join(''); `; // ...
        # Corresponds to the JSON property `headerColor`
        # @return [Google::Apis::SheetsV4::Color]
        attr_accessor :header_color
      
        # A color value.
        # Corresponds to the JSON property `headerColorStyle`
        # @return [Google::Apis::SheetsV4::ColorStyle]
        attr_accessor :header_color_style
      
        # Represents a color in the RGBA color space. This representation is designed
        # for simplicity of conversion to/from color representations in various
        # languages over compactness; for example, the fields of this representation can
        # be trivially provided to the constructor of "java.awt.Color" in Java; it can
        # also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
        # method in iOS; and, with just a little work, it can be easily formatted into a
        # CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
        # information about the absolute color space that should be used to interpret
        # the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
        # applications SHOULD assume the sRGB color space. Note: when color equality
        # needs to be decided, implementations, unless documented otherwise, will treat
        # two colors to be equal if all their red, green, blue and alpha values each
        # differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
        # public static java.awt.Color fromProto(Color protocolor) ` float alpha =
        # protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
        # java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
        # ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
        # float) color.getRed(); float green = (float) color.getGreen(); float blue = (
        # float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
        # = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
        # .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
        # ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
        # denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
        # Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
        # protocolor red]; float green = [protocolor green]; float blue = [protocolor
        # blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
        # alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
        # colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
        # UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
        # green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
        # alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
        # blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
        # [result autorelease]; return result; ` // ... Example (JavaScript): // ...
        # var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
        # var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
        # var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
        # var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
        # rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
        # 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
        # ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
        # ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
        # hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
        # var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
        # resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
        # join(''); `; // ...
        # Corresponds to the JSON property `secondBandColor`
        # @return [Google::Apis::SheetsV4::Color]
        attr_accessor :second_band_color
      
        # A color value.
        # Corresponds to the JSON property `secondBandColorStyle`
        # @return [Google::Apis::SheetsV4::ColorStyle]
        attr_accessor :second_band_color_style
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @first_band_color = args[:first_band_color] if args.key?(:first_band_color)
          @first_band_color_style = args[:first_band_color_style] if args.key?(:first_band_color_style)
          @footer_color = args[:footer_color] if args.key?(:footer_color)
          @footer_color_style = args[:footer_color_style] if args.key?(:footer_color_style)
          @header_color = args[:header_color] if args.key?(:header_color)
          @header_color_style = args[:header_color_style] if args.key?(:header_color_style)
          @second_band_color = args[:second_band_color] if args.key?(:second_band_color)
          @second_band_color_style = args[:second_band_color_style] if args.key?(:second_band_color_style)
        end
      end
      
      # Formatting options for baseline value.
      class BaselineValueFormat
        include Google::Apis::Core::Hashable
      
        # The comparison type of key value with baseline value.
        # Corresponds to the JSON property `comparisonType`
        # @return [String]
        attr_accessor :comparison_type
      
        # Description which is appended after the baseline value. This field is optional.
        # Corresponds to the JSON property `description`
        # @return [String]
        attr_accessor :description
      
        # Represents a color in the RGBA color space. This representation is designed
        # for simplicity of conversion to/from color representations in various
        # languages over compactness; for example, the fields of this representation can
        # be trivially provided to the constructor of "java.awt.Color" in Java; it can
        # also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
        # method in iOS; and, with just a little work, it can be easily formatted into a
        # CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
        # information about the absolute color space that should be used to interpret
        # the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
        # applications SHOULD assume the sRGB color space. Note: when color equality
        # needs to be decided, implementations, unless documented otherwise, will treat
        # two colors to be equal if all their red, green, blue and alpha values each
        # differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
        # public static java.awt.Color fromProto(Color protocolor) ` float alpha =
        # protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
        # java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
        # ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
        # float) color.getRed(); float green = (float) color.getGreen(); float blue = (
        # float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
        # = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
        # .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
        # ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
        # denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
        # Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
        # protocolor red]; float green = [protocolor green]; float blue = [protocolor
        # blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
        # alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
        # colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
        # UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
        # green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
        # alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
        # blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
        # [result autorelease]; return result; ` // ... Example (JavaScript): // ...
        # var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
        # var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
        # var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
        # var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
        # rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
        # 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
        # ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
        # ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
        # hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
        # var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
        # resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
        # join(''); `; // ...
        # Corresponds to the JSON property `negativeColor`
        # @return [Google::Apis::SheetsV4::Color]
        attr_accessor :negative_color
      
        # A color value.
        # Corresponds to the JSON property `negativeColorStyle`
        # @return [Google::Apis::SheetsV4::ColorStyle]
        attr_accessor :negative_color_style
      
        # Position settings for text.
        # Corresponds to the JSON property `position`
        # @return [Google::Apis::SheetsV4::TextPosition]
        attr_accessor :position
      
        # Represents a color in the RGBA color space. This representation is designed
        # for simplicity of conversion to/from color representations in various
        # languages over compactness; for example, the fields of this representation can
        # be trivially provided to the constructor of "java.awt.Color" in Java; it can
        # also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
        # method in iOS; and, with just a little work, it can be easily formatted into a
        # CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
        # information about the absolute color space that should be used to interpret
        # the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
        # applications SHOULD assume the sRGB color space. Note: when color equality
        # needs to be decided, implementations, unless documented otherwise, will treat
        # two colors to be equal if all their red, green, blue and alpha values each
        # differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
        # public static java.awt.Color fromProto(Color protocolor) ` float alpha =
        # protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
        # java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
        # ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
        # float) color.getRed(); float green = (float) color.getGreen(); float blue = (
        # float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
        # = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
        # .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
        # ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
        # denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
        # Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
        # protocolor red]; float green = [protocolor green]; float blue = [protocolor
        # blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
        # alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
        # colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
        # UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
        # green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
        # alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
        # blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
        # [result autorelease]; return result; ` // ... Example (JavaScript): // ...
        # var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
        # var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
        # var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
        # var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
        # rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
        # 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
        # ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
        # ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
        # hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
        # var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
        # resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
        # join(''); `; // ...
        # Corresponds to the JSON property `positiveColor`
        # @return [Google::Apis::SheetsV4::Color]
        attr_accessor :positive_color
      
        # A color value.
        # Corresponds to the JSON property `positiveColorStyle`
        # @return [Google::Apis::SheetsV4::ColorStyle]
        attr_accessor :positive_color_style
      
        # The format of a run of text in a cell. Absent values indicate that the field
        # isn't specified.
        # Corresponds to the JSON property `textFormat`
        # @return [Google::Apis::SheetsV4::TextFormat]
        attr_accessor :text_format
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @comparison_type = args[:comparison_type] if args.key?(:comparison_type)
          @description = args[:description] if args.key?(:description)
          @negative_color = args[:negative_color] if args.key?(:negative_color)
          @negative_color_style = args[:negative_color_style] if args.key?(:negative_color_style)
          @position = args[:position] if args.key?(:position)
          @positive_color = args[:positive_color] if args.key?(:positive_color)
          @positive_color_style = args[:positive_color_style] if args.key?(:positive_color_style)
          @text_format = args[:text_format] if args.key?(:text_format)
        end
      end
      
      # An axis of the chart. A chart may not have more than one axis per axis
      # position.
      class BasicChartAxis
        include Google::Apis::Core::Hashable
      
        # The format of a run of text in a cell. Absent values indicate that the field
        # isn't specified.
        # Corresponds to the JSON property `format`
        # @return [Google::Apis::SheetsV4::TextFormat]
        attr_accessor :format
      
        # The position of this axis.
        # Corresponds to the JSON property `position`
        # @return [String]
        attr_accessor :position
      
        # The title of this axis. If set, this overrides any title inferred from headers
        # of the data.
        # Corresponds to the JSON property `title`
        # @return [String]
        attr_accessor :title
      
        # Position settings for text.
        # Corresponds to the JSON property `titleTextPosition`
        # @return [Google::Apis::SheetsV4::TextPosition]
        attr_accessor :title_text_position
      
        # The options that define a "view window" for a chart (such as the visible
        # values in an axis).
        # Corresponds to the JSON property `viewWindowOptions`
        # @return [Google::Apis::SheetsV4::ChartAxisViewWindowOptions]
        attr_accessor :view_window_options
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @format = args[:format] if args.key?(:format)
          @position = args[:position] if args.key?(:position)
          @title = args[:title] if args.key?(:title)
          @title_text_position = args[:title_text_position] if args.key?(:title_text_position)
          @view_window_options = args[:view_window_options] if args.key?(:view_window_options)
        end
      end
      
      # The domain of a chart. For example, if charting stock prices over time, this
      # would be the date.
      class BasicChartDomain
        include Google::Apis::Core::Hashable
      
        # The data included in a domain or series.
        # Corresponds to the JSON property `domain`
        # @return [Google::Apis::SheetsV4::ChartData]
        attr_accessor :domain
      
        # True to reverse the order of the domain values (horizontal axis).
        # Corresponds to the JSON property `reversed`
        # @return [Boolean]
        attr_accessor :reversed
        alias_method :reversed?, :reversed
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @domain = args[:domain] if args.key?(:domain)
          @reversed = args[:reversed] if args.key?(:reversed)
        end
      end
      
      # A single series of data in a chart. For example, if charting stock prices over
      # time, multiple series may exist, one for the "Open Price", "High Price", "Low
      # Price" and "Close Price".
      class BasicChartSeries
        include Google::Apis::Core::Hashable
      
        # Represents a color in the RGBA color space. This representation is designed
        # for simplicity of conversion to/from color representations in various
        # languages over compactness; for example, the fields of this representation can
        # be trivially provided to the constructor of "java.awt.Color" in Java; it can
        # also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
        # method in iOS; and, with just a little work, it can be easily formatted into a
        # CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
        # information about the absolute color space that should be used to interpret
        # the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
        # applications SHOULD assume the sRGB color space. Note: when color equality
        # needs to be decided, implementations, unless documented otherwise, will treat
        # two colors to be equal if all their red, green, blue and alpha values each
        # differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
        # public static java.awt.Color fromProto(Color protocolor) ` float alpha =
        # protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
        # java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
        # ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
        # float) color.getRed(); float green = (float) color.getGreen(); float blue = (
        # float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
        # = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
        # .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
        # ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
        # denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
        # Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
        # protocolor red]; float green = [protocolor green]; float blue = [protocolor
        # blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
        # alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
        # colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
        # UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
        # green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
        # alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
        # blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
        # [result autorelease]; return result; ` // ... Example (JavaScript): // ...
        # var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
        # var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
        # var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
        # var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
        # rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
        # 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
        # ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
        # ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
        # hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
        # var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
        # resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
        # join(''); `; // ...
        # Corresponds to the JSON property `color`
        # @return [Google::Apis::SheetsV4::Color]
        attr_accessor :color
      
        # A color value.
        # Corresponds to the JSON property `colorStyle`
        # @return [Google::Apis::SheetsV4::ColorStyle]
        attr_accessor :color_style
      
        # Settings for one set of data labels. Data labels are annotations that appear
        # next to a set of data, such as the points on a line chart, and provide
        # additional information about what the data represents, such as a text
        # representation of the value behind that point on the graph.
        # Corresponds to the JSON property `dataLabel`
        # @return [Google::Apis::SheetsV4::DataLabel]
        attr_accessor :data_label
      
        # Properties that describe the style of a line.
        # Corresponds to the JSON property `lineStyle`
        # @return [Google::Apis::SheetsV4::LineStyle]
        attr_accessor :line_style
      
        # The style of a point on the chart.
        # Corresponds to the JSON property `pointStyle`
        # @return [Google::Apis::SheetsV4::PointStyle]
        attr_accessor :point_style
      
        # The data included in a domain or series.
        # Corresponds to the JSON property `series`
        # @return [Google::Apis::SheetsV4::ChartData]
        attr_accessor :series
      
        # Style override settings for series data points.
        # Corresponds to the JSON property `styleOverrides`
        # @return [Array<Google::Apis::SheetsV4::BasicSeriesDataPointStyleOverride>]
        attr_accessor :style_overrides
      
        # The minor axis that will specify the range of values for this series. For
        # example, if charting stocks over time, the "Volume" series may want to be
        # pinned to the right with the prices pinned to the left, because the scale of
        # trading volume is different than the scale of prices. It is an error to
        # specify an axis that isn't a valid minor axis for the chart's type.
        # Corresponds to the JSON property `targetAxis`
        # @return [String]
        attr_accessor :target_axis
      
        # The type of this series. Valid only if the chartType is COMBO. Different types
        # will change the way the series is visualized. Only LINE, AREA, and COLUMN are
        # supported.
        # Corresponds to the JSON property `type`
        # @return [String]
        attr_accessor :type
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @color = args[:color] if args.key?(:color)
          @color_style = args[:color_style] if args.key?(:color_style)
          @data_label = args[:data_label] if args.key?(:data_label)
          @line_style = args[:line_style] if args.key?(:line_style)
          @point_style = args[:point_style] if args.key?(:point_style)
          @series = args[:series] if args.key?(:series)
          @style_overrides = args[:style_overrides] if args.key?(:style_overrides)
          @target_axis = args[:target_axis] if args.key?(:target_axis)
          @type = args[:type] if args.key?(:type)
        end
      end
      
      # The specification for a basic chart. See BasicChartType for the list of charts
      # this supports.
      class BasicChartSpec
        include Google::Apis::Core::Hashable
      
        # The axis on the chart.
        # Corresponds to the JSON property `axis`
        # @return [Array<Google::Apis::SheetsV4::BasicChartAxis>]
        attr_accessor :axis
      
        # The type of the chart.
        # Corresponds to the JSON property `chartType`
        # @return [String]
        attr_accessor :chart_type
      
        # The behavior of tooltips and data highlighting when hovering on data and chart
        # area.
        # Corresponds to the JSON property `compareMode`
        # @return [String]
        attr_accessor :compare_mode
      
        # The domain of data this is charting. Only a single domain is supported.
        # Corresponds to the JSON property `domains`
        # @return [Array<Google::Apis::SheetsV4::BasicChartDomain>]
        attr_accessor :domains
      
        # The number of rows or columns in the data that are "headers". If not set,
        # Google Sheets will guess how many rows are headers based on the data. (Note
        # that BasicChartAxis.title may override the axis title inferred from the header
        # values.)
        # Corresponds to the JSON property `headerCount`
        # @return [Fixnum]
        attr_accessor :header_count
      
        # If some values in a series are missing, gaps may appear in the chart (e.g,
        # segments of lines in a line chart will be missing). To eliminate these gaps
        # set this to true. Applies to Line, Area, and Combo charts.
        # Corresponds to the JSON property `interpolateNulls`
        # @return [Boolean]
        attr_accessor :interpolate_nulls
        alias_method :interpolate_nulls?, :interpolate_nulls
      
        # The position of the chart legend.
        # Corresponds to the JSON property `legendPosition`
        # @return [String]
        attr_accessor :legend_position
      
        # Gets whether all lines should be rendered smooth or straight by default.
        # Applies to Line charts.
        # Corresponds to the JSON property `lineSmoothing`
        # @return [Boolean]
        attr_accessor :line_smoothing
        alias_method :line_smoothing?, :line_smoothing
      
        # The data this chart is visualizing.
        # Corresponds to the JSON property `series`
        # @return [Array<Google::Apis::SheetsV4::BasicChartSeries>]
        attr_accessor :series
      
        # The stacked type for charts that support vertical stacking. Applies to Area,
        # Bar, Column, Combo, and Stepped Area charts.
        # Corresponds to the JSON property `stackedType`
        # @return [String]
        attr_accessor :stacked_type
      
        # True to make the chart 3D. Applies to Bar and Column charts.
        # Corresponds to the JSON property `threeDimensional`
        # @return [Boolean]
        attr_accessor :three_dimensional
        alias_method :three_dimensional?, :three_dimensional
      
        # Settings for one set of data labels. Data labels are annotations that appear
        # next to a set of data, such as the points on a line chart, and provide
        # additional information about what the data represents, such as a text
        # representation of the value behind that point on the graph.
        # Corresponds to the JSON property `totalDataLabel`
        # @return [Google::Apis::SheetsV4::DataLabel]
        attr_accessor :total_data_label
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @axis = args[:axis] if args.key?(:axis)
          @chart_type = args[:chart_type] if args.key?(:chart_type)
          @compare_mode = args[:compare_mode] if args.key?(:compare_mode)
          @domains = args[:domains] if args.key?(:domains)
          @header_count = args[:header_count] if args.key?(:header_count)
          @interpolate_nulls = args[:interpolate_nulls] if args.key?(:interpolate_nulls)
          @legend_position = args[:legend_position] if args.key?(:legend_position)
          @line_smoothing = args[:line_smoothing] if args.key?(:line_smoothing)
          @series = args[:series] if args.key?(:series)
          @stacked_type = args[:stacked_type] if args.key?(:stacked_type)
          @three_dimensional = args[:three_dimensional] if args.key?(:three_dimensional)
          @total_data_label = args[:total_data_label] if args.key?(:total_data_label)
        end
      end
      
      # The default filter associated with a sheet.
      class BasicFilter
        include Google::Apis::Core::Hashable
      
        # The criteria for showing/hiding values per column. The map's key is the column
        # index, and the value is the criteria for that column. This field is deprecated
        # in favor of filter_specs.
        # Corresponds to the JSON property `criteria`
        # @return [Hash<String,Google::Apis::SheetsV4::FilterCriteria>]
        attr_accessor :criteria
      
        # The filter criteria per column. Both criteria and filter_specs are populated
        # in responses. If both fields are specified in an update request, this field
        # takes precedence.
        # Corresponds to the JSON property `filterSpecs`
        # @return [Array<Google::Apis::SheetsV4::FilterSpec>]
        attr_accessor :filter_specs
      
        # A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
        # the start index is inclusive and the end index is exclusive -- [start_index,
        # end_index). Missing indexes indicate the range is unbounded on that side. For
        # example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
        # start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
        # 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
        # start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
        # sheet_id:0` The start index must always be less than or equal to the end index.
        # If the start index equals the end index, then the range is empty. Empty
        # ranges are typically not meaningful and are usually rendered in the UI as `#
        # REF!`.
        # Corresponds to the JSON property `range`
        # @return [Google::Apis::SheetsV4::GridRange]
        attr_accessor :range
      
        # The sort order per column. Later specifications are used when values are equal
        # in the earlier specifications.
        # Corresponds to the JSON property `sortSpecs`
        # @return [Array<Google::Apis::SheetsV4::SortSpec>]
        attr_accessor :sort_specs
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @criteria = args[:criteria] if args.key?(:criteria)
          @filter_specs = args[:filter_specs] if args.key?(:filter_specs)
          @range = args[:range] if args.key?(:range)
          @sort_specs = args[:sort_specs] if args.key?(:sort_specs)
        end
      end
      
      # Style override settings for a single series data point.
      class BasicSeriesDataPointStyleOverride
        include Google::Apis::Core::Hashable
      
        # Represents a color in the RGBA color space. This representation is designed
        # for simplicity of conversion to/from color representations in various
        # languages over compactness; for example, the fields of this representation can
        # be trivially provided to the constructor of "java.awt.Color" in Java; it can
        # also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
        # method in iOS; and, with just a little work, it can be easily formatted into a
        # CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
        # information about the absolute color space that should be used to interpret
        # the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
        # applications SHOULD assume the sRGB color space. Note: when color equality
        # needs to be decided, implementations, unless documented otherwise, will treat
        # two colors to be equal if all their red, green, blue and alpha values each
        # differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
        # public static java.awt.Color fromProto(Color protocolor) ` float alpha =
        # protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
        # java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
        # ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
        # float) color.getRed(); float green = (float) color.getGreen(); float blue = (
        # float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
        # = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
        # .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
        # ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
        # denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
        # Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
        # protocolor red]; float green = [protocolor green]; float blue = [protocolor
        # blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
        # alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
        # colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
        # UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
        # green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
        # alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
        # blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
        # [result autorelease]; return result; ` // ... Example (JavaScript): // ...
        # var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
        # var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
        # var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
        # var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
        # rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
        # 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
        # ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
        # ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
        # hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
        # var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
        # resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
        # join(''); `; // ...
        # Corresponds to the JSON property `color`
        # @return [Google::Apis::SheetsV4::Color]
        attr_accessor :color
      
        # A color value.
        # Corresponds to the JSON property `colorStyle`
        # @return [Google::Apis::SheetsV4::ColorStyle]
        attr_accessor :color_style
      
        # Zero based index of the series data point.
        # Corresponds to the JSON property `index`
        # @return [Fixnum]
        attr_accessor :index
      
        # The style of a point on the chart.
        # Corresponds to the JSON property `pointStyle`
        # @return [Google::Apis::SheetsV4::PointStyle]
        attr_accessor :point_style
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @color = args[:color] if args.key?(:color)
          @color_style = args[:color_style] if args.key?(:color_style)
          @index = args[:index] if args.key?(:index)
          @point_style = args[:point_style] if args.key?(:point_style)
        end
      end
      
      # The request for clearing more than one range selected by a DataFilter in a
      # spreadsheet.
      class BatchClearValuesByDataFilterRequest
        include Google::Apis::Core::Hashable
      
        # The DataFilters used to determine which ranges to clear.
        # Corresponds to the JSON property `dataFilters`
        # @return [Array<Google::Apis::SheetsV4::DataFilter>]
        attr_accessor :data_filters
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @data_filters = args[:data_filters] if args.key?(:data_filters)
        end
      end
      
      # The response when clearing a range of values selected with DataFilters in a
      # spreadsheet.
      class BatchClearValuesByDataFilterResponse
        include Google::Apis::Core::Hashable
      
        # The ranges that were cleared, in A1 notation. If the requests are for an
        # unbounded range or a ranger larger than the bounds of the sheet, this is the
        # actual ranges that were cleared, bounded to the sheet's limits.
        # Corresponds to the JSON property `clearedRanges`
        # @return [Array<String>]
        attr_accessor :cleared_ranges
      
        # The spreadsheet the updates were applied to.
        # Corresponds to the JSON property `spreadsheetId`
        # @return [String]
        attr_accessor :spreadsheet_id
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @cleared_ranges = args[:cleared_ranges] if args.key?(:cleared_ranges)
          @spreadsheet_id = args[:spreadsheet_id] if args.key?(:spreadsheet_id)
        end
      end
      
      # The request for clearing more than one range of values in a spreadsheet.
      class BatchClearValuesRequest
        include Google::Apis::Core::Hashable
      
        # The ranges to clear, in A1 notation.
        # Corresponds to the JSON property `ranges`
        # @return [Array<String>]
        attr_accessor :ranges
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @ranges = args[:ranges] if args.key?(:ranges)
        end
      end
      
      # The response when clearing a range of values in a spreadsheet.
      class BatchClearValuesResponse
        include Google::Apis::Core::Hashable
      
        # The ranges that were cleared, in A1 notation. If the requests are for an
        # unbounded range or a ranger larger than the bounds of the sheet, this is the
        # actual ranges that were cleared, bounded to the sheet's limits.
        # Corresponds to the JSON property `clearedRanges`
        # @return [Array<String>]
        attr_accessor :cleared_ranges
      
        # The spreadsheet the updates were applied to.
        # Corresponds to the JSON property `spreadsheetId`
        # @return [String]
        attr_accessor :spreadsheet_id
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @cleared_ranges = args[:cleared_ranges] if args.key?(:cleared_ranges)
          @spreadsheet_id = args[:spreadsheet_id] if args.key?(:spreadsheet_id)
        end
      end
      
      # The request for retrieving a range of values in a spreadsheet selected by a
      # set of DataFilters.
      class BatchGetValuesByDataFilterRequest
        include Google::Apis::Core::Hashable
      
        # The data filters used to match the ranges of values to retrieve. Ranges that
        # match any of the specified data filters are included in the response.
        # Corresponds to the JSON property `dataFilters`
        # @return [Array<Google::Apis::SheetsV4::DataFilter>]
        attr_accessor :data_filters
      
        # How dates, times, and durations should be represented in the output. This is
        # ignored if value_render_option is FORMATTED_VALUE. The default dateTime render
        # option is [DateTimeRenderOption.SERIAL_NUMBER].
        # Corresponds to the JSON property `dateTimeRenderOption`
        # @return [String]
        attr_accessor :date_time_render_option
      
        # The major dimension that results should use. For example, if the spreadsheet
        # data is: `A1=1,B1=2,A2=3,B2=4`, then a request that selects that range and
        # sets `majorDimension=ROWS` returns `[[1,2],[3,4]]`, whereas a request that
        # sets `majorDimension=COLUMNS` returns `[[1,3],[2,4]]`.
        # Corresponds to the JSON property `majorDimension`
        # @return [String]
        attr_accessor :major_dimension
      
        # How values should be represented in the output. The default render option is
        # ValueRenderOption.FORMATTED_VALUE.
        # Corresponds to the JSON property `valueRenderOption`
        # @return [String]
        attr_accessor :value_render_option
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @data_filters = args[:data_filters] if args.key?(:data_filters)
          @date_time_render_option = args[:date_time_render_option] if args.key?(:date_time_render_option)
          @major_dimension = args[:major_dimension] if args.key?(:major_dimension)
          @value_render_option = args[:value_render_option] if args.key?(:value_render_option)
        end
      end
      
      # The response when retrieving more than one range of values in a spreadsheet
      # selected by DataFilters.
      class BatchGetValuesByDataFilterResponse
        include Google::Apis::Core::Hashable
      
        # The ID of the spreadsheet the data was retrieved from.
        # Corresponds to the JSON property `spreadsheetId`
        # @return [String]
        attr_accessor :spreadsheet_id
      
        # The requested values with the list of data filters that matched them.
        # Corresponds to the JSON property `valueRanges`
        # @return [Array<Google::Apis::SheetsV4::MatchedValueRange>]
        attr_accessor :value_ranges
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @spreadsheet_id = args[:spreadsheet_id] if args.key?(:spreadsheet_id)
          @value_ranges = args[:value_ranges] if args.key?(:value_ranges)
        end
      end
      
      # The response when retrieving more than one range of values in a spreadsheet.
      class BatchGetValuesResponse
        include Google::Apis::Core::Hashable
      
        # The ID of the spreadsheet the data was retrieved from.
        # Corresponds to the JSON property `spreadsheetId`
        # @return [String]
        attr_accessor :spreadsheet_id
      
        # The requested values. The order of the ValueRanges is the same as the order of
        # the requested ranges.
        # Corresponds to the JSON property `valueRanges`
        # @return [Array<Google::Apis::SheetsV4::ValueRange>]
        attr_accessor :value_ranges
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @spreadsheet_id = args[:spreadsheet_id] if args.key?(:spreadsheet_id)
          @value_ranges = args[:value_ranges] if args.key?(:value_ranges)
        end
      end
      
      # The request for updating any aspect of a spreadsheet.
      class BatchUpdateSpreadsheetRequest
        include Google::Apis::Core::Hashable
      
        # Determines if the update response should include the spreadsheet resource.
        # Corresponds to the JSON property `includeSpreadsheetInResponse`
        # @return [Boolean]
        attr_accessor :include_spreadsheet_in_response
        alias_method :include_spreadsheet_in_response?, :include_spreadsheet_in_response
      
        # A list of updates to apply to the spreadsheet. Requests will be applied in the
        # order they are specified. If any request is not valid, no requests will be
        # applied.
        # Corresponds to the JSON property `requests`
        # @return [Array<Google::Apis::SheetsV4::Request>]
        attr_accessor :requests
      
        # True if grid data should be returned. Meaningful only if
        # include_spreadsheet_in_response is 'true'. This parameter is ignored if a
        # field mask was set in the request.
        # Corresponds to the JSON property `responseIncludeGridData`
        # @return [Boolean]
        attr_accessor :response_include_grid_data
        alias_method :response_include_grid_data?, :response_include_grid_data
      
        # Limits the ranges included in the response spreadsheet. Meaningful only if
        # include_spreadsheet_in_response is 'true'.
        # Corresponds to the JSON property `responseRanges`
        # @return [Array<String>]
        attr_accessor :response_ranges
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @include_spreadsheet_in_response = args[:include_spreadsheet_in_response] if args.key?(:include_spreadsheet_in_response)
          @requests = args[:requests] if args.key?(:requests)
          @response_include_grid_data = args[:response_include_grid_data] if args.key?(:response_include_grid_data)
          @response_ranges = args[:response_ranges] if args.key?(:response_ranges)
        end
      end
      
      # The reply for batch updating a spreadsheet.
      class BatchUpdateSpreadsheetResponse
        include Google::Apis::Core::Hashable
      
        # The reply of the updates. This maps 1:1 with the updates, although replies to
        # some requests may be empty.
        # Corresponds to the JSON property `replies`
        # @return [Array<Google::Apis::SheetsV4::Response>]
        attr_accessor :replies
      
        # The spreadsheet the updates were applied to.
        # Corresponds to the JSON property `spreadsheetId`
        # @return [String]
        attr_accessor :spreadsheet_id
      
        # Resource that represents a spreadsheet.
        # Corresponds to the JSON property `updatedSpreadsheet`
        # @return [Google::Apis::SheetsV4::Spreadsheet]
        attr_accessor :updated_spreadsheet
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @replies = args[:replies] if args.key?(:replies)
          @spreadsheet_id = args[:spreadsheet_id] if args.key?(:spreadsheet_id)
          @updated_spreadsheet = args[:updated_spreadsheet] if args.key?(:updated_spreadsheet)
        end
      end
      
      # The request for updating more than one range of values in a spreadsheet.
      class BatchUpdateValuesByDataFilterRequest
        include Google::Apis::Core::Hashable
      
        # The new values to apply to the spreadsheet. If more than one range is matched
        # by the specified DataFilter the specified values are applied to all of those
        # ranges.
        # Corresponds to the JSON property `data`
        # @return [Array<Google::Apis::SheetsV4::DataFilterValueRange>]
        attr_accessor :data
      
        # Determines if the update response should include the values of the cells that
        # were updated. By default, responses do not include the updated values. The `
        # updatedData` field within each of the BatchUpdateValuesResponse.responses
        # contains the updated values. If the range to write was larger than the range
        # actually written, the response includes all values in the requested range (
        # excluding trailing empty rows and columns).
        # Corresponds to the JSON property `includeValuesInResponse`
        # @return [Boolean]
        attr_accessor :include_values_in_response
        alias_method :include_values_in_response?, :include_values_in_response
      
        # Determines how dates, times, and durations in the response should be rendered.
        # This is ignored if response_value_render_option is FORMATTED_VALUE. The
        # default dateTime render option is DateTimeRenderOption.SERIAL_NUMBER.
        # Corresponds to the JSON property `responseDateTimeRenderOption`
        # @return [String]
        attr_accessor :response_date_time_render_option
      
        # Determines how values in the response should be rendered. The default render
        # option is ValueRenderOption.FORMATTED_VALUE.
        # Corresponds to the JSON property `responseValueRenderOption`
        # @return [String]
        attr_accessor :response_value_render_option
      
        # How the input data should be interpreted.
        # Corresponds to the JSON property `valueInputOption`
        # @return [String]
        attr_accessor :value_input_option
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @data = args[:data] if args.key?(:data)
          @include_values_in_response = args[:include_values_in_response] if args.key?(:include_values_in_response)
          @response_date_time_render_option = args[:response_date_time_render_option] if args.key?(:response_date_time_render_option)
          @response_value_render_option = args[:response_value_render_option] if args.key?(:response_value_render_option)
          @value_input_option = args[:value_input_option] if args.key?(:value_input_option)
        end
      end
      
      # The response when updating a range of values in a spreadsheet.
      class BatchUpdateValuesByDataFilterResponse
        include Google::Apis::Core::Hashable
      
        # The response for each range updated.
        # Corresponds to the JSON property `responses`
        # @return [Array<Google::Apis::SheetsV4::UpdateValuesByDataFilterResponse>]
        attr_accessor :responses
      
        # The spreadsheet the updates were applied to.
        # Corresponds to the JSON property `spreadsheetId`
        # @return [String]
        attr_accessor :spreadsheet_id
      
        # The total number of cells updated.
        # Corresponds to the JSON property `totalUpdatedCells`
        # @return [Fixnum]
        attr_accessor :total_updated_cells
      
        # The total number of columns where at least one cell in the column was updated.
        # Corresponds to the JSON property `totalUpdatedColumns`
        # @return [Fixnum]
        attr_accessor :total_updated_columns
      
        # The total number of rows where at least one cell in the row was updated.
        # Corresponds to the JSON property `totalUpdatedRows`
        # @return [Fixnum]
        attr_accessor :total_updated_rows
      
        # The total number of sheets where at least one cell in the sheet was updated.
        # Corresponds to the JSON property `totalUpdatedSheets`
        # @return [Fixnum]
        attr_accessor :total_updated_sheets
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @responses = args[:responses] if args.key?(:responses)
          @spreadsheet_id = args[:spreadsheet_id] if args.key?(:spreadsheet_id)
          @total_updated_cells = args[:total_updated_cells] if args.key?(:total_updated_cells)
          @total_updated_columns = args[:total_updated_columns] if args.key?(:total_updated_columns)
          @total_updated_rows = args[:total_updated_rows] if args.key?(:total_updated_rows)
          @total_updated_sheets = args[:total_updated_sheets] if args.key?(:total_updated_sheets)
        end
      end
      
      # The request for updating more than one range of values in a spreadsheet.
      class BatchUpdateValuesRequest
        include Google::Apis::Core::Hashable
      
        # The new values to apply to the spreadsheet.
        # Corresponds to the JSON property `data`
        # @return [Array<Google::Apis::SheetsV4::ValueRange>]
        attr_accessor :data
      
        # Determines if the update response should include the values of the cells that
        # were updated. By default, responses do not include the updated values. The `
        # updatedData` field within each of the BatchUpdateValuesResponse.responses
        # contains the updated values. If the range to write was larger than the range
        # actually written, the response includes all values in the requested range (
        # excluding trailing empty rows and columns).
        # Corresponds to the JSON property `includeValuesInResponse`
        # @return [Boolean]
        attr_accessor :include_values_in_response
        alias_method :include_values_in_response?, :include_values_in_response
      
        # Determines how dates, times, and durations in the response should be rendered.
        # This is ignored if response_value_render_option is FORMATTED_VALUE. The
        # default dateTime render option is DateTimeRenderOption.SERIAL_NUMBER.
        # Corresponds to the JSON property `responseDateTimeRenderOption`
        # @return [String]
        attr_accessor :response_date_time_render_option
      
        # Determines how values in the response should be rendered. The default render
        # option is ValueRenderOption.FORMATTED_VALUE.
        # Corresponds to the JSON property `responseValueRenderOption`
        # @return [String]
        attr_accessor :response_value_render_option
      
        # How the input data should be interpreted.
        # Corresponds to the JSON property `valueInputOption`
        # @return [String]
        attr_accessor :value_input_option
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @data = args[:data] if args.key?(:data)
          @include_values_in_response = args[:include_values_in_response] if args.key?(:include_values_in_response)
          @response_date_time_render_option = args[:response_date_time_render_option] if args.key?(:response_date_time_render_option)
          @response_value_render_option = args[:response_value_render_option] if args.key?(:response_value_render_option)
          @value_input_option = args[:value_input_option] if args.key?(:value_input_option)
        end
      end
      
      # The response when updating a range of values in a spreadsheet.
      class BatchUpdateValuesResponse
        include Google::Apis::Core::Hashable
      
        # One UpdateValuesResponse per requested range, in the same order as the
        # requests appeared.
        # Corresponds to the JSON property `responses`
        # @return [Array<Google::Apis::SheetsV4::UpdateValuesResponse>]
        attr_accessor :responses
      
        # The spreadsheet the updates were applied to.
        # Corresponds to the JSON property `spreadsheetId`
        # @return [String]
        attr_accessor :spreadsheet_id
      
        # The total number of cells updated.
        # Corresponds to the JSON property `totalUpdatedCells`
        # @return [Fixnum]
        attr_accessor :total_updated_cells
      
        # The total number of columns where at least one cell in the column was updated.
        # Corresponds to the JSON property `totalUpdatedColumns`
        # @return [Fixnum]
        attr_accessor :total_updated_columns
      
        # The total number of rows where at least one cell in the row was updated.
        # Corresponds to the JSON property `totalUpdatedRows`
        # @return [Fixnum]
        attr_accessor :total_updated_rows
      
        # The total number of sheets where at least one cell in the sheet was updated.
        # Corresponds to the JSON property `totalUpdatedSheets`
        # @return [Fixnum]
        attr_accessor :total_updated_sheets
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @responses = args[:responses] if args.key?(:responses)
          @spreadsheet_id = args[:spreadsheet_id] if args.key?(:spreadsheet_id)
          @total_updated_cells = args[:total_updated_cells] if args.key?(:total_updated_cells)
          @total_updated_columns = args[:total_updated_columns] if args.key?(:total_updated_columns)
          @total_updated_rows = args[:total_updated_rows] if args.key?(:total_updated_rows)
          @total_updated_sheets = args[:total_updated_sheets] if args.key?(:total_updated_sheets)
        end
      end
      
      # The specification of a BigQuery data source that's connected to a sheet.
      class BigQueryDataSourceSpec
        include Google::Apis::Core::Hashable
      
        # The ID of a BigQuery enabled GCP project with a billing account attached. For
        # any queries executed against the data source, the project is charged.
        # Corresponds to the JSON property `projectId`
        # @return [String]
        attr_accessor :project_id
      
        # Specifies a custom BigQuery query.
        # Corresponds to the JSON property `querySpec`
        # @return [Google::Apis::SheetsV4::BigQueryQuerySpec]
        attr_accessor :query_spec
      
        # Specifies a BigQuery table definition. Only [native tables](https://cloud.
        # google.com/bigquery/docs/tables-intro) is allowed.
        # Corresponds to the JSON property `tableSpec`
        # @return [Google::Apis::SheetsV4::BigQueryTableSpec]
        attr_accessor :table_spec
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @project_id = args[:project_id] if args.key?(:project_id)
          @query_spec = args[:query_spec] if args.key?(:query_spec)
          @table_spec = args[:table_spec] if args.key?(:table_spec)
        end
      end
      
      # Specifies a custom BigQuery query.
      class BigQueryQuerySpec
        include Google::Apis::Core::Hashable
      
        # The raw query string.
        # Corresponds to the JSON property `rawQuery`
        # @return [String]
        attr_accessor :raw_query
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @raw_query = args[:raw_query] if args.key?(:raw_query)
        end
      end
      
      # Specifies a BigQuery table definition. Only [native tables](https://cloud.
      # google.com/bigquery/docs/tables-intro) is allowed.
      class BigQueryTableSpec
        include Google::Apis::Core::Hashable
      
        # The BigQuery dataset id.
        # Corresponds to the JSON property `datasetId`
        # @return [String]
        attr_accessor :dataset_id
      
        # The BigQuery table id.
        # Corresponds to the JSON property `tableId`
        # @return [String]
        attr_accessor :table_id
      
        # The ID of a BigQuery project the table belongs to. If not specified, the
        # project_id is assumed.
        # Corresponds to the JSON property `tableProjectId`
        # @return [String]
        attr_accessor :table_project_id
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @dataset_id = args[:dataset_id] if args.key?(:dataset_id)
          @table_id = args[:table_id] if args.key?(:table_id)
          @table_project_id = args[:table_project_id] if args.key?(:table_project_id)
        end
      end
      
      # A condition that can evaluate to true or false. BooleanConditions are used by
      # conditional formatting, data validation, and the criteria in filters.
      class BooleanCondition
        include Google::Apis::Core::Hashable
      
        # The type of condition.
        # Corresponds to the JSON property `type`
        # @return [String]
        attr_accessor :type
      
        # The values of the condition. The number of supported values depends on the
        # condition type. Some support zero values, others one or two values, and
        # ConditionType.ONE_OF_LIST supports an arbitrary number of values.
        # Corresponds to the JSON property `values`
        # @return [Array<Google::Apis::SheetsV4::ConditionValue>]
        attr_accessor :values
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @type = args[:type] if args.key?(:type)
          @values = args[:values] if args.key?(:values)
        end
      end
      
      # A rule that may or may not match, depending on the condition.
      class BooleanRule
        include Google::Apis::Core::Hashable
      
        # A condition that can evaluate to true or false. BooleanConditions are used by
        # conditional formatting, data validation, and the criteria in filters.
        # Corresponds to the JSON property `condition`
        # @return [Google::Apis::SheetsV4::BooleanCondition]
        attr_accessor :condition
      
        # The format of a cell.
        # Corresponds to the JSON property `format`
        # @return [Google::Apis::SheetsV4::CellFormat]
        attr_accessor :format
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @condition = args[:condition] if args.key?(:condition)
          @format = args[:format] if args.key?(:format)
        end
      end
      
      # A border along a cell.
      class Border
        include Google::Apis::Core::Hashable
      
        # Represents a color in the RGBA color space. This representation is designed
        # for simplicity of conversion to/from color representations in various
        # languages over compactness; for example, the fields of this representation can
        # be trivially provided to the constructor of "java.awt.Color" in Java; it can
        # also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
        # method in iOS; and, with just a little work, it can be easily formatted into a
        # CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
        # information about the absolute color space that should be used to interpret
        # the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
        # applications SHOULD assume the sRGB color space. Note: when color equality
        # needs to be decided, implementations, unless documented otherwise, will treat
        # two colors to be equal if all their red, green, blue and alpha values each
        # differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
        # public static java.awt.Color fromProto(Color protocolor) ` float alpha =
        # protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
        # java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
        # ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
        # float) color.getRed(); float green = (float) color.getGreen(); float blue = (
        # float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
        # = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
        # .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
        # ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
        # denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
        # Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
        # protocolor red]; float green = [protocolor green]; float blue = [protocolor
        # blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
        # alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
        # colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
        # UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
        # green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
        # alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
        # blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
        # [result autorelease]; return result; ` // ... Example (JavaScript): // ...
        # var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
        # var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
        # var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
        # var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
        # rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
        # 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
        # ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
        # ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
        # hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
        # var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
        # resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
        # join(''); `; // ...
        # Corresponds to the JSON property `color`
        # @return [Google::Apis::SheetsV4::Color]
        attr_accessor :color
      
        # A color value.
        # Corresponds to the JSON property `colorStyle`
        # @return [Google::Apis::SheetsV4::ColorStyle]
        attr_accessor :color_style
      
        # The style of the border.
        # Corresponds to the JSON property `style`
        # @return [String]
        attr_accessor :style
      
        # The width of the border, in pixels. Deprecated; the width is determined by the
        # "style" field.
        # Corresponds to the JSON property `width`
        # @return [Fixnum]
        attr_accessor :width
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @color = args[:color] if args.key?(:color)
          @color_style = args[:color_style] if args.key?(:color_style)
          @style = args[:style] if args.key?(:style)
          @width = args[:width] if args.key?(:width)
        end
      end
      
      # The borders of the cell.
      class Borders
        include Google::Apis::Core::Hashable
      
        # A border along a cell.
        # Corresponds to the JSON property `bottom`
        # @return [Google::Apis::SheetsV4::Border]
        attr_accessor :bottom
      
        # A border along a cell.
        # Corresponds to the JSON property `left`
        # @return [Google::Apis::SheetsV4::Border]
        attr_accessor :left
      
        # A border along a cell.
        # Corresponds to the JSON property `right`
        # @return [Google::Apis::SheetsV4::Border]
        attr_accessor :right
      
        # A border along a cell.
        # Corresponds to the JSON property `top`
        # @return [Google::Apis::SheetsV4::Border]
        attr_accessor :top
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @bottom = args[:bottom] if args.key?(:bottom)
          @left = args[:left] if args.key?(:left)
          @right = args[:right] if args.key?(:right)
          @top = args[:top] if args.key?(:top)
        end
      end
      
      # A bubble chart.
      class BubbleChartSpec
        include Google::Apis::Core::Hashable
      
        # Represents a color in the RGBA color space. This representation is designed
        # for simplicity of conversion to/from color representations in various
        # languages over compactness; for example, the fields of this representation can
        # be trivially provided to the constructor of "java.awt.Color" in Java; it can
        # also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
        # method in iOS; and, with just a little work, it can be easily formatted into a
        # CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
        # information about the absolute color space that should be used to interpret
        # the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
        # applications SHOULD assume the sRGB color space. Note: when color equality
        # needs to be decided, implementations, unless documented otherwise, will treat
        # two colors to be equal if all their red, green, blue and alpha values each
        # differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
        # public static java.awt.Color fromProto(Color protocolor) ` float alpha =
        # protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
        # java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
        # ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
        # float) color.getRed(); float green = (float) color.getGreen(); float blue = (
        # float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
        # = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
        # .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
        # ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
        # denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
        # Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
        # protocolor red]; float green = [protocolor green]; float blue = [protocolor
        # blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
        # alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
        # colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
        # UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
        # green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
        # alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
        # blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
        # [result autorelease]; return result; ` // ... Example (JavaScript): // ...
        # var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
        # var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
        # var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
        # var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
        # rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
        # 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
        # ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
        # ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
        # hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
        # var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
        # resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
        # join(''); `; // ...
        # Corresponds to the JSON property `bubbleBorderColor`
        # @return [Google::Apis::SheetsV4::Color]
        attr_accessor :bubble_border_color
      
        # A color value.
        # Corresponds to the JSON property `bubbleBorderColorStyle`
        # @return [Google::Apis::SheetsV4::ColorStyle]
        attr_accessor :bubble_border_color_style
      
        # The data included in a domain or series.
        # Corresponds to the JSON property `bubbleLabels`
        # @return [Google::Apis::SheetsV4::ChartData]
        attr_accessor :bubble_labels
      
        # The max radius size of the bubbles, in pixels. If specified, the field must be
        # a positive value.
        # Corresponds to the JSON property `bubbleMaxRadiusSize`
        # @return [Fixnum]
        attr_accessor :bubble_max_radius_size
      
        # The minimum radius size of the bubbles, in pixels. If specific, the field must
        # be a positive value.
        # Corresponds to the JSON property `bubbleMinRadiusSize`
        # @return [Fixnum]
        attr_accessor :bubble_min_radius_size
      
        # The opacity of the bubbles between 0 and 1.0. 0 is fully transparent and 1 is
        # fully opaque.
        # Corresponds to the JSON property `bubbleOpacity`
        # @return [Float]
        attr_accessor :bubble_opacity
      
        # The data included in a domain or series.
        # Corresponds to the JSON property `bubbleSizes`
        # @return [Google::Apis::SheetsV4::ChartData]
        attr_accessor :bubble_sizes
      
        # The format of a run of text in a cell. Absent values indicate that the field
        # isn't specified.
        # Corresponds to the JSON property `bubbleTextStyle`
        # @return [Google::Apis::SheetsV4::TextFormat]
        attr_accessor :bubble_text_style
      
        # The data included in a domain or series.
        # Corresponds to the JSON property `domain`
        # @return [Google::Apis::SheetsV4::ChartData]
        attr_accessor :domain
      
        # The data included in a domain or series.
        # Corresponds to the JSON property `groupIds`
        # @return [Google::Apis::SheetsV4::ChartData]
        attr_accessor :group_ids
      
        # Where the legend of the chart should be drawn.
        # Corresponds to the JSON property `legendPosition`
        # @return [String]
        attr_accessor :legend_position
      
        # The data included in a domain or series.
        # Corresponds to the JSON property `series`
        # @return [Google::Apis::SheetsV4::ChartData]
        attr_accessor :series
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @bubble_border_color = args[:bubble_border_color] if args.key?(:bubble_border_color)
          @bubble_border_color_style = args[:bubble_border_color_style] if args.key?(:bubble_border_color_style)
          @bubble_labels = args[:bubble_labels] if args.key?(:bubble_labels)
          @bubble_max_radius_size = args[:bubble_max_radius_size] if args.key?(:bubble_max_radius_size)
          @bubble_min_radius_size = args[:bubble_min_radius_size] if args.key?(:bubble_min_radius_size)
          @bubble_opacity = args[:bubble_opacity] if args.key?(:bubble_opacity)
          @bubble_sizes = args[:bubble_sizes] if args.key?(:bubble_sizes)
          @bubble_text_style = args[:bubble_text_style] if args.key?(:bubble_text_style)
          @domain = args[:domain] if args.key?(:domain)
          @group_ids = args[:group_ids] if args.key?(:group_ids)
          @legend_position = args[:legend_position] if args.key?(:legend_position)
          @series = args[:series] if args.key?(:series)
        end
      end
      
      # A candlestick chart.
      class CandlestickChartSpec
        include Google::Apis::Core::Hashable
      
        # The Candlestick chart data. Only one CandlestickData is supported.
        # Corresponds to the JSON property `data`
        # @return [Array<Google::Apis::SheetsV4::CandlestickData>]
        attr_accessor :data
      
        # The domain of a CandlestickChart.
        # Corresponds to the JSON property `domain`
        # @return [Google::Apis::SheetsV4::CandlestickDomain]
        attr_accessor :domain
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @data = args[:data] if args.key?(:data)
          @domain = args[:domain] if args.key?(:domain)
        end
      end
      
      # The Candlestick chart data, each containing the low, open, close, and high
      # values for a series.
      class CandlestickData
        include Google::Apis::Core::Hashable
      
        # The series of a CandlestickData.
        # Corresponds to the JSON property `closeSeries`
        # @return [Google::Apis::SheetsV4::CandlestickSeries]
        attr_accessor :close_series
      
        # The series of a CandlestickData.
        # Corresponds to the JSON property `highSeries`
        # @return [Google::Apis::SheetsV4::CandlestickSeries]
        attr_accessor :high_series
      
        # The series of a CandlestickData.
        # Corresponds to the JSON property `lowSeries`
        # @return [Google::Apis::SheetsV4::CandlestickSeries]
        attr_accessor :low_series
      
        # The series of a CandlestickData.
        # Corresponds to the JSON property `openSeries`
        # @return [Google::Apis::SheetsV4::CandlestickSeries]
        attr_accessor :open_series
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @close_series = args[:close_series] if args.key?(:close_series)
          @high_series = args[:high_series] if args.key?(:high_series)
          @low_series = args[:low_series] if args.key?(:low_series)
          @open_series = args[:open_series] if args.key?(:open_series)
        end
      end
      
      # The domain of a CandlestickChart.
      class CandlestickDomain
        include Google::Apis::Core::Hashable
      
        # The data included in a domain or series.
        # Corresponds to the JSON property `data`
        # @return [Google::Apis::SheetsV4::ChartData]
        attr_accessor :data
      
        # True to reverse the order of the domain values (horizontal axis).
        # Corresponds to the JSON property `reversed`
        # @return [Boolean]
        attr_accessor :reversed
        alias_method :reversed?, :reversed
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @data = args[:data] if args.key?(:data)
          @reversed = args[:reversed] if args.key?(:reversed)
        end
      end
      
      # The series of a CandlestickData.
      class CandlestickSeries
        include Google::Apis::Core::Hashable
      
        # The data included in a domain or series.
        # Corresponds to the JSON property `data`
        # @return [Google::Apis::SheetsV4::ChartData]
        attr_accessor :data
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @data = args[:data] if args.key?(:data)
        end
      end
      
      # Data about a specific cell.
      class CellData
        include Google::Apis::Core::Hashable
      
        # A data source formula.
        # Corresponds to the JSON property `dataSourceFormula`
        # @return [Google::Apis::SheetsV4::DataSourceFormula]
        attr_accessor :data_source_formula
      
        # A data source table, which allows the user to import a static table of data
        # from the DataSource into Sheets. This is also known as "Extract" in the Sheets
        # editor.
        # Corresponds to the JSON property `dataSourceTable`
        # @return [Google::Apis::SheetsV4::DataSourceTable]
        attr_accessor :data_source_table
      
        # A data validation rule.
        # Corresponds to the JSON property `dataValidation`
        # @return [Google::Apis::SheetsV4::DataValidationRule]
        attr_accessor :data_validation
      
        # The format of a cell.
        # Corresponds to the JSON property `effectiveFormat`
        # @return [Google::Apis::SheetsV4::CellFormat]
        attr_accessor :effective_format
      
        # The kinds of value that a cell in a spreadsheet can have.
        # Corresponds to the JSON property `effectiveValue`
        # @return [Google::Apis::SheetsV4::ExtendedValue]
        attr_accessor :effective_value
      
        # The formatted value of the cell. This is the value as it's shown to the user.
        # This field is read-only.
        # Corresponds to the JSON property `formattedValue`
        # @return [String]
        attr_accessor :formatted_value
      
        # A hyperlink this cell points to, if any. If the cell contains multiple
        # hyperlinks, this field will be empty. This field is read-only. To set it, use
        # a `=HYPERLINK` formula in the userEnteredValue.formulaValue field.
        # Corresponds to the JSON property `hyperlink`
        # @return [String]
        attr_accessor :hyperlink
      
        # Any note on the cell.
        # Corresponds to the JSON property `note`
        # @return [String]
        attr_accessor :note
      
        # A pivot table.
        # Corresponds to the JSON property `pivotTable`
        # @return [Google::Apis::SheetsV4::PivotTable]
        attr_accessor :pivot_table
      
        # Runs of rich text applied to subsections of the cell. Runs are only valid on
        # user entered strings, not formulas, bools, or numbers. Properties of a run
        # start at a specific index in the text and continue until the next run. Runs
        # will inherit the properties of the cell unless explicitly changed. When
        # writing, the new runs will overwrite any prior runs. When writing a new
        # user_entered_value, previous runs are erased.
        # Corresponds to the JSON property `textFormatRuns`
        # @return [Array<Google::Apis::SheetsV4::TextFormatRun>]
        attr_accessor :text_format_runs
      
        # The format of a cell.
        # Corresponds to the JSON property `userEnteredFormat`
        # @return [Google::Apis::SheetsV4::CellFormat]
        attr_accessor :user_entered_format
      
        # The kinds of value that a cell in a spreadsheet can have.
        # Corresponds to the JSON property `userEnteredValue`
        # @return [Google::Apis::SheetsV4::ExtendedValue]
        attr_accessor :user_entered_value
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @data_source_formula = args[:data_source_formula] if args.key?(:data_source_formula)
          @data_source_table = args[:data_source_table] if args.key?(:data_source_table)
          @data_validation = args[:data_validation] if args.key?(:data_validation)
          @effective_format = args[:effective_format] if args.key?(:effective_format)
          @effective_value = args[:effective_value] if args.key?(:effective_value)
          @formatted_value = args[:formatted_value] if args.key?(:formatted_value)
          @hyperlink = args[:hyperlink] if args.key?(:hyperlink)
          @note = args[:note] if args.key?(:note)
          @pivot_table = args[:pivot_table] if args.key?(:pivot_table)
          @text_format_runs = args[:text_format_runs] if args.key?(:text_format_runs)
          @user_entered_format = args[:user_entered_format] if args.key?(:user_entered_format)
          @user_entered_value = args[:user_entered_value] if args.key?(:user_entered_value)
        end
      end
      
      # The format of a cell.
      class CellFormat
        include Google::Apis::Core::Hashable
      
        # Represents a color in the RGBA color space. This representation is designed
        # for simplicity of conversion to/from color representations in various
        # languages over compactness; for example, the fields of this representation can
        # be trivially provided to the constructor of "java.awt.Color" in Java; it can
        # also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
        # method in iOS; and, with just a little work, it can be easily formatted into a
        # CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
        # information about the absolute color space that should be used to interpret
        # the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
        # applications SHOULD assume the sRGB color space. Note: when color equality
        # needs to be decided, implementations, unless documented otherwise, will treat
        # two colors to be equal if all their red, green, blue and alpha values each
        # differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
        # public static java.awt.Color fromProto(Color protocolor) ` float alpha =
        # protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
        # java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
        # ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
        # float) color.getRed(); float green = (float) color.getGreen(); float blue = (
        # float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
        # = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
        # .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
        # ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
        # denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
        # Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
        # protocolor red]; float green = [protocolor green]; float blue = [protocolor
        # blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
        # alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
        # colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
        # UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
        # green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
        # alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
        # blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
        # [result autorelease]; return result; ` // ... Example (JavaScript): // ...
        # var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
        # var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
        # var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
        # var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
        # rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
        # 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
        # ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
        # ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
        # hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
        # var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
        # resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
        # join(''); `; // ...
        # Corresponds to the JSON property `backgroundColor`
        # @return [Google::Apis::SheetsV4::Color]
        attr_accessor :background_color
      
        # A color value.
        # Corresponds to the JSON property `backgroundColorStyle`
        # @return [Google::Apis::SheetsV4::ColorStyle]
        attr_accessor :background_color_style
      
        # The borders of the cell.
        # Corresponds to the JSON property `borders`
        # @return [Google::Apis::SheetsV4::Borders]
        attr_accessor :borders
      
        # The horizontal alignment of the value in the cell.
        # Corresponds to the JSON property `horizontalAlignment`
        # @return [String]
        attr_accessor :horizontal_alignment
      
        # How a hyperlink, if it exists, should be displayed in the cell.
        # Corresponds to the JSON property `hyperlinkDisplayType`
        # @return [String]
        attr_accessor :hyperlink_display_type
      
        # The number format of a cell.
        # Corresponds to the JSON property `numberFormat`
        # @return [Google::Apis::SheetsV4::NumberFormat]
        attr_accessor :number_format
      
        # The amount of padding around the cell, in pixels. When updating padding, every
        # field must be specified.
        # Corresponds to the JSON property `padding`
        # @return [Google::Apis::SheetsV4::Padding]
        attr_accessor :padding
      
        # The direction of the text in the cell.
        # Corresponds to the JSON property `textDirection`
        # @return [String]
        attr_accessor :text_direction
      
        # The format of a run of text in a cell. Absent values indicate that the field
        # isn't specified.
        # Corresponds to the JSON property `textFormat`
        # @return [Google::Apis::SheetsV4::TextFormat]
        attr_accessor :text_format
      
        # The rotation applied to text in a cell.
        # Corresponds to the JSON property `textRotation`
        # @return [Google::Apis::SheetsV4::TextRotation]
        attr_accessor :text_rotation
      
        # The vertical alignment of the value in the cell.
        # Corresponds to the JSON property `verticalAlignment`
        # @return [String]
        attr_accessor :vertical_alignment
      
        # The wrap strategy for the value in the cell.
        # Corresponds to the JSON property `wrapStrategy`
        # @return [String]
        attr_accessor :wrap_strategy
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @background_color = args[:background_color] if args.key?(:background_color)
          @background_color_style = args[:background_color_style] if args.key?(:background_color_style)
          @borders = args[:borders] if args.key?(:borders)
          @horizontal_alignment = args[:horizontal_alignment] if args.key?(:horizontal_alignment)
          @hyperlink_display_type = args[:hyperlink_display_type] if args.key?(:hyperlink_display_type)
          @number_format = args[:number_format] if args.key?(:number_format)
          @padding = args[:padding] if args.key?(:padding)
          @text_direction = args[:text_direction] if args.key?(:text_direction)
          @text_format = args[:text_format] if args.key?(:text_format)
          @text_rotation = args[:text_rotation] if args.key?(:text_rotation)
          @vertical_alignment = args[:vertical_alignment] if args.key?(:vertical_alignment)
          @wrap_strategy = args[:wrap_strategy] if args.key?(:wrap_strategy)
        end
      end
      
      # The options that define a "view window" for a chart (such as the visible
      # values in an axis).
      class ChartAxisViewWindowOptions
        include Google::Apis::Core::Hashable
      
        # The maximum numeric value to be shown in this view window. If unset, will
        # automatically determine a maximum value that looks good for the data.
        # Corresponds to the JSON property `viewWindowMax`
        # @return [Float]
        attr_accessor :view_window_max
      
        # The minimum numeric value to be shown in this view window. If unset, will
        # automatically determine a minimum value that looks good for the data.
        # Corresponds to the JSON property `viewWindowMin`
        # @return [Float]
        attr_accessor :view_window_min
      
        # The view window's mode.
        # Corresponds to the JSON property `viewWindowMode`
        # @return [String]
        attr_accessor :view_window_mode
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @view_window_max = args[:view_window_max] if args.key?(:view_window_max)
          @view_window_min = args[:view_window_min] if args.key?(:view_window_min)
          @view_window_mode = args[:view_window_mode] if args.key?(:view_window_mode)
        end
      end
      
      # Custom number formatting options for chart attributes.
      class ChartCustomNumberFormatOptions
        include Google::Apis::Core::Hashable
      
        # Custom prefix to be prepended to the chart attribute. This field is optional.
        # Corresponds to the JSON property `prefix`
        # @return [String]
        attr_accessor :prefix
      
        # Custom suffix to be appended to the chart attribute. This field is optional.
        # Corresponds to the JSON property `suffix`
        # @return [String]
        attr_accessor :suffix
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @prefix = args[:prefix] if args.key?(:prefix)
          @suffix = args[:suffix] if args.key?(:suffix)
        end
      end
      
      # The data included in a domain or series.
      class ChartData
        include Google::Apis::Core::Hashable
      
        # The aggregation type for the series of a data source chart. Not supported for
        # regular charts.
        # Corresponds to the JSON property `aggregateType`
        # @return [String]
        attr_accessor :aggregate_type
      
        # An unique identifier that references a data source column.
        # Corresponds to the JSON property `columnReference`
        # @return [Google::Apis::SheetsV4::DataSourceColumnReference]
        attr_accessor :column_reference
      
        # An optional setting on the ChartData of the domain of a data source chart that
        # defines buckets for the values in the domain rather than breaking out each
        # individual value. For example, when plotting a data source chart, you can
        # specify a histogram rule on the domain (it should only contain numeric values),
        # grouping its values into buckets. Any values of a chart series that fall into
        # the same bucket are aggregated based on the aggregate_type.
        # Corresponds to the JSON property `groupRule`
        # @return [Google::Apis::SheetsV4::ChartGroupRule]
        attr_accessor :group_rule
      
        # Source ranges for a chart.
        # Corresponds to the JSON property `sourceRange`
        # @return [Google::Apis::SheetsV4::ChartSourceRange]
        attr_accessor :source_range
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @aggregate_type = args[:aggregate_type] if args.key?(:aggregate_type)
          @column_reference = args[:column_reference] if args.key?(:column_reference)
          @group_rule = args[:group_rule] if args.key?(:group_rule)
          @source_range = args[:source_range] if args.key?(:source_range)
        end
      end
      
      # Allows you to organize the date-time values in a source data column into
      # buckets based on selected parts of their date or time values.
      class ChartDateTimeRule
        include Google::Apis::Core::Hashable
      
        # The type of date-time grouping to apply.
        # Corresponds to the JSON property `type`
        # @return [String]
        attr_accessor :type
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @type = args[:type] if args.key?(:type)
        end
      end
      
      # An optional setting on the ChartData of the domain of a data source chart that
      # defines buckets for the values in the domain rather than breaking out each
      # individual value. For example, when plotting a data source chart, you can
      # specify a histogram rule on the domain (it should only contain numeric values),
      # grouping its values into buckets. Any values of a chart series that fall into
      # the same bucket are aggregated based on the aggregate_type.
      class ChartGroupRule
        include Google::Apis::Core::Hashable
      
        # Allows you to organize the date-time values in a source data column into
        # buckets based on selected parts of their date or time values.
        # Corresponds to the JSON property `dateTimeRule`
        # @return [Google::Apis::SheetsV4::ChartDateTimeRule]
        attr_accessor :date_time_rule
      
        # Allows you to organize numeric values in a source data column into buckets of
        # constant size.
        # Corresponds to the JSON property `histogramRule`
        # @return [Google::Apis::SheetsV4::ChartHistogramRule]
        attr_accessor :histogram_rule
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @date_time_rule = args[:date_time_rule] if args.key?(:date_time_rule)
          @histogram_rule = args[:histogram_rule] if args.key?(:histogram_rule)
        end
      end
      
      # Allows you to organize numeric values in a source data column into buckets of
      # constant size.
      class ChartHistogramRule
        include Google::Apis::Core::Hashable
      
        # The size of the buckets that are created. Must be positive.
        # Corresponds to the JSON property `intervalSize`
        # @return [Float]
        attr_accessor :interval_size
      
        # The maximum value at which items are placed into buckets. Values greater than
        # the maximum are grouped into a single bucket. If omitted, it is determined by
        # the maximum item value.
        # Corresponds to the JSON property `maxValue`
        # @return [Float]
        attr_accessor :max_value
      
        # The minimum value at which items are placed into buckets. Values that are less
        # than the minimum are grouped into a single bucket. If omitted, it is
        # determined by the minimum item value.
        # Corresponds to the JSON property `minValue`
        # @return [Float]
        attr_accessor :min_value
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @interval_size = args[:interval_size] if args.key?(:interval_size)
          @max_value = args[:max_value] if args.key?(:max_value)
          @min_value = args[:min_value] if args.key?(:min_value)
        end
      end
      
      # Source ranges for a chart.
      class ChartSourceRange
        include Google::Apis::Core::Hashable
      
        # The ranges of data for a series or domain. Exactly one dimension must have a
        # length of 1, and all sources in the list must have the same dimension with
        # length 1. The domain (if it exists) & all series must have the same number of
        # source ranges. If using more than one source range, then the source range at a
        # given offset must be in order and contiguous across the domain and series. For
        # example, these are valid configurations: domain sources: A1:A5 series1 sources:
        # B1:B5 series2 sources: D6:D10 domain sources: A1:A5, C10:C12 series1 sources:
        # B1:B5, D10:D12 series2 sources: C1:C5, E10:E12
        # Corresponds to the JSON property `sources`
        # @return [Array<Google::Apis::SheetsV4::GridRange>]
        attr_accessor :sources
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @sources = args[:sources] if args.key?(:sources)
        end
      end
      
      # The specifications of a chart.
      class ChartSpec
        include Google::Apis::Core::Hashable
      
        # The alternative text that describes the chart. This is often used for
        # accessibility.
        # Corresponds to the JSON property `altText`
        # @return [String]
        attr_accessor :alt_text
      
        # Represents a color in the RGBA color space. This representation is designed
        # for simplicity of conversion to/from color representations in various
        # languages over compactness; for example, the fields of this representation can
        # be trivially provided to the constructor of "java.awt.Color" in Java; it can
        # also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
        # method in iOS; and, with just a little work, it can be easily formatted into a
        # CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
        # information about the absolute color space that should be used to interpret
        # the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
        # applications SHOULD assume the sRGB color space. Note: when color equality
        # needs to be decided, implementations, unless documented otherwise, will treat
        # two colors to be equal if all their red, green, blue and alpha values each
        # differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
        # public static java.awt.Color fromProto(Color protocolor) ` float alpha =
        # protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
        # java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
        # ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
        # float) color.getRed(); float green = (float) color.getGreen(); float blue = (
        # float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
        # = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
        # .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
        # ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
        # denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
        # Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
        # protocolor red]; float green = [protocolor green]; float blue = [protocolor
        # blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
        # alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
        # colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
        # UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
        # green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
        # alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
        # blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
        # [result autorelease]; return result; ` // ... Example (JavaScript): // ...
        # var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
        # var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
        # var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
        # var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
        # rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
        # 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
        # ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
        # ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
        # hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
        # var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
        # resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
        # join(''); `; // ...
        # Corresponds to the JSON property `backgroundColor`
        # @return [Google::Apis::SheetsV4::Color]
        attr_accessor :background_color
      
        # A color value.
        # Corresponds to the JSON property `backgroundColorStyle`
        # @return [Google::Apis::SheetsV4::ColorStyle]
        attr_accessor :background_color_style
      
        # The specification for a basic chart. See BasicChartType for the list of charts
        # this supports.
        # Corresponds to the JSON property `basicChart`
        # @return [Google::Apis::SheetsV4::BasicChartSpec]
        attr_accessor :basic_chart
      
        # A bubble chart.
        # Corresponds to the JSON property `bubbleChart`
        # @return [Google::Apis::SheetsV4::BubbleChartSpec]
        attr_accessor :bubble_chart
      
        # A candlestick chart.
        # Corresponds to the JSON property `candlestickChart`
        # @return [Google::Apis::SheetsV4::CandlestickChartSpec]
        attr_accessor :candlestick_chart
      
        # Properties of a data source chart.
        # Corresponds to the JSON property `dataSourceChartProperties`
        # @return [Google::Apis::SheetsV4::DataSourceChartProperties]
        attr_accessor :data_source_chart_properties
      
        # The filters applied to the source data of the chart. Only supported for data
        # source charts.
        # Corresponds to the JSON property `filterSpecs`
        # @return [Array<Google::Apis::SheetsV4::FilterSpec>]
        attr_accessor :filter_specs
      
        # The name of the font to use by default for all chart text (e.g. title, axis
        # labels, legend). If a font is specified for a specific part of the chart it
        # will override this font name.
        # Corresponds to the JSON property `fontName`
        # @return [String]
        attr_accessor :font_name
      
        # Determines how the charts will use hidden rows or columns.
        # Corresponds to the JSON property `hiddenDimensionStrategy`
        # @return [String]
        attr_accessor :hidden_dimension_strategy
      
        # A histogram chart. A histogram chart groups data items into bins, displaying
        # each bin as a column of stacked items. Histograms are used to display the
        # distribution of a dataset. Each column of items represents a range into which
        # those items fall. The number of bins can be chosen automatically or specified
        # explicitly.
        # Corresponds to the JSON property `histogramChart`
        # @return [Google::Apis::SheetsV4::HistogramChartSpec]
        attr_accessor :histogram_chart
      
        # True to make a chart fill the entire space in which it's rendered with minimum
        # padding. False to use the default padding. (Not applicable to Geo and Org
        # charts.)
        # Corresponds to the JSON property `maximized`
        # @return [Boolean]
        attr_accessor :maximized
        alias_method :maximized?, :maximized
      
        # An org chart. Org charts require a unique set of labels in labels and may
        # optionally include parent_labels and tooltips. parent_labels contain, for each
        # node, the label identifying the parent node. tooltips contain, for each node,
        # an optional tooltip. For example, to describe an OrgChart with Alice as the
        # CEO, Bob as the President (reporting to Alice) and Cathy as VP of Sales (also
        # reporting to Alice), have labels contain "Alice", "Bob", "Cathy",
        # parent_labels contain "", "Alice", "Alice" and tooltips contain "CEO", "
        # President", "VP Sales".
        # Corresponds to the JSON property `orgChart`
        # @return [Google::Apis::SheetsV4::OrgChartSpec]
        attr_accessor :org_chart
      
        # A pie chart.
        # Corresponds to the JSON property `pieChart`
        # @return [Google::Apis::SheetsV4::PieChartSpec]
        attr_accessor :pie_chart
      
        # A scorecard chart. Scorecard charts are used to highlight key performance
        # indicators, known as KPIs, on the spreadsheet. A scorecard chart can represent
        # things like total sales, average cost, or a top selling item. You can specify
        # a single data value, or aggregate over a range of data. Percentage or absolute
        # difference from a baseline value can be highlighted, like changes over time.
        # Corresponds to the JSON property `scorecardChart`
        # @return [Google::Apis::SheetsV4::ScorecardChartSpec]
        attr_accessor :scorecard_chart
      
        # The order to sort the chart data by. Only a single sort spec is supported.
        # Only supported for data source charts.
        # Corresponds to the JSON property `sortSpecs`
        # @return [Array<Google::Apis::SheetsV4::SortSpec>]
        attr_accessor :sort_specs
      
        # The subtitle of the chart.
        # Corresponds to the JSON property `subtitle`
        # @return [String]
        attr_accessor :subtitle
      
        # The format of a run of text in a cell. Absent values indicate that the field
        # isn't specified.
        # Corresponds to the JSON property `subtitleTextFormat`
        # @return [Google::Apis::SheetsV4::TextFormat]
        attr_accessor :subtitle_text_format
      
        # Position settings for text.
        # Corresponds to the JSON property `subtitleTextPosition`
        # @return [Google::Apis::SheetsV4::TextPosition]
        attr_accessor :subtitle_text_position
      
        # The title of the chart.
        # Corresponds to the JSON property `title`
        # @return [String]
        attr_accessor :title
      
        # The format of a run of text in a cell. Absent values indicate that the field
        # isn't specified.
        # Corresponds to the JSON property `titleTextFormat`
        # @return [Google::Apis::SheetsV4::TextFormat]
        attr_accessor :title_text_format
      
        # Position settings for text.
        # Corresponds to the JSON property `titleTextPosition`
        # @return [Google::Apis::SheetsV4::TextPosition]
        attr_accessor :title_text_position
      
        # A Treemap chart.
        # Corresponds to the JSON property `treemapChart`
        # @return [Google::Apis::SheetsV4::TreemapChartSpec]
        attr_accessor :treemap_chart
      
        # A waterfall chart.
        # Corresponds to the JSON property `waterfallChart`
        # @return [Google::Apis::SheetsV4::WaterfallChartSpec]
        attr_accessor :waterfall_chart
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @alt_text = args[:alt_text] if args.key?(:alt_text)
          @background_color = args[:background_color] if args.key?(:background_color)
          @background_color_style = args[:background_color_style] if args.key?(:background_color_style)
          @basic_chart = args[:basic_chart] if args.key?(:basic_chart)
          @bubble_chart = args[:bubble_chart] if args.key?(:bubble_chart)
          @candlestick_chart = args[:candlestick_chart] if args.key?(:candlestick_chart)
          @data_source_chart_properties = args[:data_source_chart_properties] if args.key?(:data_source_chart_properties)
          @filter_specs = args[:filter_specs] if args.key?(:filter_specs)
          @font_name = args[:font_name] if args.key?(:font_name)
          @hidden_dimension_strategy = args[:hidden_dimension_strategy] if args.key?(:hidden_dimension_strategy)
          @histogram_chart = args[:histogram_chart] if args.key?(:histogram_chart)
          @maximized = args[:maximized] if args.key?(:maximized)
          @org_chart = args[:org_chart] if args.key?(:org_chart)
          @pie_chart = args[:pie_chart] if args.key?(:pie_chart)
          @scorecard_chart = args[:scorecard_chart] if args.key?(:scorecard_chart)
          @sort_specs = args[:sort_specs] if args.key?(:sort_specs)
          @subtitle = args[:subtitle] if args.key?(:subtitle)
          @subtitle_text_format = args[:subtitle_text_format] if args.key?(:subtitle_text_format)
          @subtitle_text_position = args[:subtitle_text_position] if args.key?(:subtitle_text_position)
          @title = args[:title] if args.key?(:title)
          @title_text_format = args[:title_text_format] if args.key?(:title_text_format)
          @title_text_position = args[:title_text_position] if args.key?(:title_text_position)
          @treemap_chart = args[:treemap_chart] if args.key?(:treemap_chart)
          @waterfall_chart = args[:waterfall_chart] if args.key?(:waterfall_chart)
        end
      end
      
      # Clears the basic filter, if any exists on the sheet.
      class ClearBasicFilterRequest
        include Google::Apis::Core::Hashable
      
        # The sheet ID on which the basic filter should be cleared.
        # Corresponds to the JSON property `sheetId`
        # @return [Fixnum]
        attr_accessor :sheet_id
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @sheet_id = args[:sheet_id] if args.key?(:sheet_id)
        end
      end
      
      # The request for clearing a range of values in a spreadsheet.
      class ClearValuesRequest
        include Google::Apis::Core::Hashable
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
        end
      end
      
      # The response when clearing a range of values in a spreadsheet.
      class ClearValuesResponse
        include Google::Apis::Core::Hashable
      
        # The range (in A1 notation) that was cleared. (If the request was for an
        # unbounded range or a ranger larger than the bounds of the sheet, this will be
        # the actual range that was cleared, bounded to the sheet's limits.)
        # Corresponds to the JSON property `clearedRange`
        # @return [String]
        attr_accessor :cleared_range
      
        # The spreadsheet the updates were applied to.
        # Corresponds to the JSON property `spreadsheetId`
        # @return [String]
        attr_accessor :spreadsheet_id
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @cleared_range = args[:cleared_range] if args.key?(:cleared_range)
          @spreadsheet_id = args[:spreadsheet_id] if args.key?(:spreadsheet_id)
        end
      end
      
      # Represents a color in the RGBA color space. This representation is designed
      # for simplicity of conversion to/from color representations in various
      # languages over compactness; for example, the fields of this representation can
      # be trivially provided to the constructor of "java.awt.Color" in Java; it can
      # also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
      # method in iOS; and, with just a little work, it can be easily formatted into a
      # CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
      # information about the absolute color space that should be used to interpret
      # the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
      # applications SHOULD assume the sRGB color space. Note: when color equality
      # needs to be decided, implementations, unless documented otherwise, will treat
      # two colors to be equal if all their red, green, blue and alpha values each
      # differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
      # public static java.awt.Color fromProto(Color protocolor) ` float alpha =
      # protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
      # java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
      # ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
      # float) color.getRed(); float green = (float) color.getGreen(); float blue = (
      # float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
      # = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
      # .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
      # ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
      # denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
      # Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
      # protocolor red]; float green = [protocolor green]; float blue = [protocolor
      # blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
      # alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
      # colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
      # UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
      # green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
      # alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
      # blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
      # [result autorelease]; return result; ` // ... Example (JavaScript): // ...
      # var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
      # var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
      # var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
      # var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
      # rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
      # 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
      # ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
      # ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
      # hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
      # var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
      # resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
      # join(''); `; // ...
      class Color
        include Google::Apis::Core::Hashable
      
        # The fraction of this color that should be applied to the pixel. That is, the
        # final pixel color is defined by the equation: pixel color = alpha * (this
        # color) + (1.0 - alpha) * (background color) This means that a value of 1.0
        # corresponds to a solid color, whereas a value of 0.0 corresponds to a
        # completely transparent color. This uses a wrapper message rather than a simple
        # float scalar so that it is possible to distinguish between a default value and
        # the value being unset. If omitted, this color object is to be rendered as a
        # solid color (as if the alpha value had been explicitly given with a value of 1.
        # 0).
        # Corresponds to the JSON property `alpha`
        # @return [Float]
        attr_accessor :alpha
      
        # The amount of blue in the color as a value in the interval [0, 1].
        # Corresponds to the JSON property `blue`
        # @return [Float]
        attr_accessor :blue
      
        # The amount of green in the color as a value in the interval [0, 1].
        # Corresponds to the JSON property `green`
        # @return [Float]
        attr_accessor :green
      
        # The amount of red in the color as a value in the interval [0, 1].
        # Corresponds to the JSON property `red`
        # @return [Float]
        attr_accessor :red
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @alpha = args[:alpha] if args.key?(:alpha)
          @blue = args[:blue] if args.key?(:blue)
          @green = args[:green] if args.key?(:green)
          @red = args[:red] if args.key?(:red)
        end
      end
      
      # A color value.
      class ColorStyle
        include Google::Apis::Core::Hashable
      
        # Represents a color in the RGBA color space. This representation is designed
        # for simplicity of conversion to/from color representations in various
        # languages over compactness; for example, the fields of this representation can
        # be trivially provided to the constructor of "java.awt.Color" in Java; it can
        # also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
        # method in iOS; and, with just a little work, it can be easily formatted into a
        # CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
        # information about the absolute color space that should be used to interpret
        # the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
        # applications SHOULD assume the sRGB color space. Note: when color equality
        # needs to be decided, implementations, unless documented otherwise, will treat
        # two colors to be equal if all their red, green, blue and alpha values each
        # differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
        # public static java.awt.Color fromProto(Color protocolor) ` float alpha =
        # protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
        # java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
        # ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
        # float) color.getRed(); float green = (float) color.getGreen(); float blue = (
        # float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
        # = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
        # .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
        # ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
        # denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
        # Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
        # protocolor red]; float green = [protocolor green]; float blue = [protocolor
        # blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
        # alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
        # colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
        # UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
        # green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
        # alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
        # blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
        # [result autorelease]; return result; ` // ... Example (JavaScript): // ...
        # var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
        # var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
        # var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
        # var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
        # rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
        # 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
        # ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
        # ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
        # hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
        # var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
        # resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
        # join(''); `; // ...
        # Corresponds to the JSON property `rgbColor`
        # @return [Google::Apis::SheetsV4::Color]
        attr_accessor :rgb_color
      
        # Theme color.
        # Corresponds to the JSON property `themeColor`
        # @return [String]
        attr_accessor :theme_color
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @rgb_color = args[:rgb_color] if args.key?(:rgb_color)
          @theme_color = args[:theme_color] if args.key?(:theme_color)
        end
      end
      
      # The value of the condition.
      class ConditionValue
        include Google::Apis::Core::Hashable
      
        # A relative date (based on the current date). Valid only if the type is
        # DATE_BEFORE, DATE_AFTER, DATE_ON_OR_BEFORE or DATE_ON_OR_AFTER. Relative dates
        # are not supported in data validation. They are supported only in conditional
        # formatting and conditional filters.
        # Corresponds to the JSON property `relativeDate`
        # @return [String]
        attr_accessor :relative_date
      
        # A value the condition is based on. The value is parsed as if the user typed
        # into a cell. Formulas are supported (and must begin with an `=` or a '+').
        # Corresponds to the JSON property `userEnteredValue`
        # @return [String]
        attr_accessor :user_entered_value
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @relative_date = args[:relative_date] if args.key?(:relative_date)
          @user_entered_value = args[:user_entered_value] if args.key?(:user_entered_value)
        end
      end
      
      # A rule describing a conditional format.
      class ConditionalFormatRule
        include Google::Apis::Core::Hashable
      
        # A rule that may or may not match, depending on the condition.
        # Corresponds to the JSON property `booleanRule`
        # @return [Google::Apis::SheetsV4::BooleanRule]
        attr_accessor :boolean_rule
      
        # A rule that applies a gradient color scale format, based on the interpolation
        # points listed. The format of a cell will vary based on its contents as
        # compared to the values of the interpolation points.
        # Corresponds to the JSON property `gradientRule`
        # @return [Google::Apis::SheetsV4::GradientRule]
        attr_accessor :gradient_rule
      
        # The ranges that are formatted if the condition is true. All the ranges must be
        # on the same grid.
        # Corresponds to the JSON property `ranges`
        # @return [Array<Google::Apis::SheetsV4::GridRange>]
        attr_accessor :ranges
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @boolean_rule = args[:boolean_rule] if args.key?(:boolean_rule)
          @gradient_rule = args[:gradient_rule] if args.key?(:gradient_rule)
          @ranges = args[:ranges] if args.key?(:ranges)
        end
      end
      
      # Copies data from the source to the destination.
      class CopyPasteRequest
        include Google::Apis::Core::Hashable
      
        # A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
        # the start index is inclusive and the end index is exclusive -- [start_index,
        # end_index). Missing indexes indicate the range is unbounded on that side. For
        # example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
        # start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
        # 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
        # start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
        # sheet_id:0` The start index must always be less than or equal to the end index.
        # If the start index equals the end index, then the range is empty. Empty
        # ranges are typically not meaningful and are usually rendered in the UI as `#
        # REF!`.
        # Corresponds to the JSON property `destination`
        # @return [Google::Apis::SheetsV4::GridRange]
        attr_accessor :destination
      
        # How that data should be oriented when pasting.
        # Corresponds to the JSON property `pasteOrientation`
        # @return [String]
        attr_accessor :paste_orientation
      
        # What kind of data to paste.
        # Corresponds to the JSON property `pasteType`
        # @return [String]
        attr_accessor :paste_type
      
        # A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
        # the start index is inclusive and the end index is exclusive -- [start_index,
        # end_index). Missing indexes indicate the range is unbounded on that side. For
        # example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
        # start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
        # 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
        # start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
        # sheet_id:0` The start index must always be less than or equal to the end index.
        # If the start index equals the end index, then the range is empty. Empty
        # ranges are typically not meaningful and are usually rendered in the UI as `#
        # REF!`.
        # Corresponds to the JSON property `source`
        # @return [Google::Apis::SheetsV4::GridRange]
        attr_accessor :source
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @destination = args[:destination] if args.key?(:destination)
          @paste_orientation = args[:paste_orientation] if args.key?(:paste_orientation)
          @paste_type = args[:paste_type] if args.key?(:paste_type)
          @source = args[:source] if args.key?(:source)
        end
      end
      
      # The request to copy a sheet across spreadsheets.
      class CopySheetToAnotherSpreadsheetRequest
        include Google::Apis::Core::Hashable
      
        # The ID of the spreadsheet to copy the sheet to.
        # Corresponds to the JSON property `destinationSpreadsheetId`
        # @return [String]
        attr_accessor :destination_spreadsheet_id
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @destination_spreadsheet_id = args[:destination_spreadsheet_id] if args.key?(:destination_spreadsheet_id)
        end
      end
      
      # A request to create developer metadata.
      class CreateDeveloperMetadataRequest
        include Google::Apis::Core::Hashable
      
        # Developer metadata associated with a location or object in a spreadsheet.
        # Developer metadata may be used to associate arbitrary data with various parts
        # of a spreadsheet and will remain associated at those locations as they move
        # around and the spreadsheet is edited. For example, if developer metadata is
        # associated with row 5 and another row is then subsequently inserted above row
        # 5, that original metadata will still be associated with the row it was first
        # associated with (what is now row 6). If the associated object is deleted its
        # metadata is deleted too.
        # Corresponds to the JSON property `developerMetadata`
        # @return [Google::Apis::SheetsV4::DeveloperMetadata]
        attr_accessor :developer_metadata
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @developer_metadata = args[:developer_metadata] if args.key?(:developer_metadata)
        end
      end
      
      # The response from creating developer metadata.
      class CreateDeveloperMetadataResponse
        include Google::Apis::Core::Hashable
      
        # Developer metadata associated with a location or object in a spreadsheet.
        # Developer metadata may be used to associate arbitrary data with various parts
        # of a spreadsheet and will remain associated at those locations as they move
        # around and the spreadsheet is edited. For example, if developer metadata is
        # associated with row 5 and another row is then subsequently inserted above row
        # 5, that original metadata will still be associated with the row it was first
        # associated with (what is now row 6). If the associated object is deleted its
        # metadata is deleted too.
        # Corresponds to the JSON property `developerMetadata`
        # @return [Google::Apis::SheetsV4::DeveloperMetadata]
        attr_accessor :developer_metadata
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @developer_metadata = args[:developer_metadata] if args.key?(:developer_metadata)
        end
      end
      
      # Moves data from the source to the destination.
      class CutPasteRequest
        include Google::Apis::Core::Hashable
      
        # A coordinate in a sheet. All indexes are zero-based.
        # Corresponds to the JSON property `destination`
        # @return [Google::Apis::SheetsV4::GridCoordinate]
        attr_accessor :destination
      
        # What kind of data to paste. All the source data will be cut, regardless of
        # what is pasted.
        # Corresponds to the JSON property `pasteType`
        # @return [String]
        attr_accessor :paste_type
      
        # A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
        # the start index is inclusive and the end index is exclusive -- [start_index,
        # end_index). Missing indexes indicate the range is unbounded on that side. For
        # example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
        # start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
        # 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
        # start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
        # sheet_id:0` The start index must always be less than or equal to the end index.
        # If the start index equals the end index, then the range is empty. Empty
        # ranges are typically not meaningful and are usually rendered in the UI as `#
        # REF!`.
        # Corresponds to the JSON property `source`
        # @return [Google::Apis::SheetsV4::GridRange]
        attr_accessor :source
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @destination = args[:destination] if args.key?(:destination)
          @paste_type = args[:paste_type] if args.key?(:paste_type)
          @source = args[:source] if args.key?(:source)
        end
      end
      
      # The data execution status. A data execution is created to sync a data source
      # object with the latest data from a DataSource. It is usually scheduled to run
      # at background, you can check its state to tell if an execution completes There
      # are several scenarios where a data execution is triggered to run: * Adding a
      # data source creates an associated data source sheet as well as a data
      # execution to sync the data from the data source to the sheet. * Updating a
      # data source creates a data execution to refresh the associated data source
      # sheet similarly. * You can send refresh request to explicitly refresh one or
      # multiple data source objects.
      class DataExecutionStatus
        include Google::Apis::Core::Hashable
      
        # The error code.
        # Corresponds to the JSON property `errorCode`
        # @return [String]
        attr_accessor :error_code
      
        # The error message, which may be empty.
        # Corresponds to the JSON property `errorMessage`
        # @return [String]
        attr_accessor :error_message
      
        # Gets the time the data last successfully refreshed.
        # Corresponds to the JSON property `lastRefreshTime`
        # @return [String]
        attr_accessor :last_refresh_time
      
        # The state of the data execution.
        # Corresponds to the JSON property `state`
        # @return [String]
        attr_accessor :state
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @error_code = args[:error_code] if args.key?(:error_code)
          @error_message = args[:error_message] if args.key?(:error_message)
          @last_refresh_time = args[:last_refresh_time] if args.key?(:last_refresh_time)
          @state = args[:state] if args.key?(:state)
        end
      end
      
      # Filter that describes what data should be selected or returned from a request.
      class DataFilter
        include Google::Apis::Core::Hashable
      
        # Selects data that matches the specified A1 range.
        # Corresponds to the JSON property `a1Range`
        # @return [String]
        attr_accessor :a1_range
      
        # Selects DeveloperMetadata that matches all of the specified fields. For
        # example, if only a metadata ID is specified this considers the
        # DeveloperMetadata with that particular unique ID. If a metadata key is
        # specified, this considers all developer metadata with that key. If a key,
        # visibility, and location type are all specified, this considers all developer
        # metadata with that key and visibility that are associated with a location of
        # that type. In general, this selects all DeveloperMetadata that matches the
        # intersection of all the specified fields; any field or combination of fields
        # may be specified.
        # Corresponds to the JSON property `developerMetadataLookup`
        # @return [Google::Apis::SheetsV4::DeveloperMetadataLookup]
        attr_accessor :developer_metadata_lookup
      
        # A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
        # the start index is inclusive and the end index is exclusive -- [start_index,
        # end_index). Missing indexes indicate the range is unbounded on that side. For
        # example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
        # start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
        # 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
        # start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
        # sheet_id:0` The start index must always be less than or equal to the end index.
        # If the start index equals the end index, then the range is empty. Empty
        # ranges are typically not meaningful and are usually rendered in the UI as `#
        # REF!`.
        # Corresponds to the JSON property `gridRange`
        # @return [Google::Apis::SheetsV4::GridRange]
        attr_accessor :grid_range
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @a1_range = args[:a1_range] if args.key?(:a1_range)
          @developer_metadata_lookup = args[:developer_metadata_lookup] if args.key?(:developer_metadata_lookup)
          @grid_range = args[:grid_range] if args.key?(:grid_range)
        end
      end
      
      # A range of values whose location is specified by a DataFilter.
      class DataFilterValueRange
        include Google::Apis::Core::Hashable
      
        # Filter that describes what data should be selected or returned from a request.
        # Corresponds to the JSON property `dataFilter`
        # @return [Google::Apis::SheetsV4::DataFilter]
        attr_accessor :data_filter
      
        # The major dimension of the values.
        # Corresponds to the JSON property `majorDimension`
        # @return [String]
        attr_accessor :major_dimension
      
        # The data to be written. If the provided values exceed any of the ranges
        # matched by the data filter then the request fails. If the provided values are
        # less than the matched ranges only the specified values are written, existing
        # values in the matched ranges remain unaffected.
        # Corresponds to the JSON property `values`
        # @return [Array<Array<Object>>]
        attr_accessor :values
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @data_filter = args[:data_filter] if args.key?(:data_filter)
          @major_dimension = args[:major_dimension] if args.key?(:major_dimension)
          @values = args[:values] if args.key?(:values)
        end
      end
      
      # Settings for one set of data labels. Data labels are annotations that appear
      # next to a set of data, such as the points on a line chart, and provide
      # additional information about what the data represents, such as a text
      # representation of the value behind that point on the graph.
      class DataLabel
        include Google::Apis::Core::Hashable
      
        # The data included in a domain or series.
        # Corresponds to the JSON property `customLabelData`
        # @return [Google::Apis::SheetsV4::ChartData]
        attr_accessor :custom_label_data
      
        # The placement of the data label relative to the labeled data.
        # Corresponds to the JSON property `placement`
        # @return [String]
        attr_accessor :placement
      
        # The format of a run of text in a cell. Absent values indicate that the field
        # isn't specified.
        # Corresponds to the JSON property `textFormat`
        # @return [Google::Apis::SheetsV4::TextFormat]
        attr_accessor :text_format
      
        # The type of the data label.
        # Corresponds to the JSON property `type`
        # @return [String]
        attr_accessor :type
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @custom_label_data = args[:custom_label_data] if args.key?(:custom_label_data)
          @placement = args[:placement] if args.key?(:placement)
          @text_format = args[:text_format] if args.key?(:text_format)
          @type = args[:type] if args.key?(:type)
        end
      end
      
      # Information about an external data source in the spreadsheet.
      class DataSource
        include Google::Apis::Core::Hashable
      
        # All calculated columns in the data source.
        # Corresponds to the JSON property `calculatedColumns`
        # @return [Array<Google::Apis::SheetsV4::DataSourceColumn>]
        attr_accessor :calculated_columns
      
        # The spreadsheet-scoped unique ID that identifies the data source. Example:
        # 1080547365.
        # Corresponds to the JSON property `dataSourceId`
        # @return [String]
        attr_accessor :data_source_id
      
        # The ID of the Sheet connected with the data source. The field cannot be
        # changed once set. When creating a data source, an associated DATA_SOURCE sheet
        # is also created, if the field is not specified, the ID of the created sheet
        # will be randomly generated.
        # Corresponds to the JSON property `sheetId`
        # @return [Fixnum]
        attr_accessor :sheet_id
      
        # This specifies the details of the data source. For example, for BigQuery, this
        # specifies information about the BigQuery source.
        # Corresponds to the JSON property `spec`
        # @return [Google::Apis::SheetsV4::DataSourceSpec]
        attr_accessor :spec
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @calculated_columns = args[:calculated_columns] if args.key?(:calculated_columns)
          @data_source_id = args[:data_source_id] if args.key?(:data_source_id)
          @sheet_id = args[:sheet_id] if args.key?(:sheet_id)
          @spec = args[:spec] if args.key?(:spec)
        end
      end
      
      # Properties of a data source chart.
      class DataSourceChartProperties
        include Google::Apis::Core::Hashable
      
        # The data execution status. A data execution is created to sync a data source
        # object with the latest data from a DataSource. It is usually scheduled to run
        # at background, you can check its state to tell if an execution completes There
        # are several scenarios where a data execution is triggered to run: * Adding a
        # data source creates an associated data source sheet as well as a data
        # execution to sync the data from the data source to the sheet. * Updating a
        # data source creates a data execution to refresh the associated data source
        # sheet similarly. * You can send refresh request to explicitly refresh one or
        # multiple data source objects.
        # Corresponds to the JSON property `dataExecutionStatus`
        # @return [Google::Apis::SheetsV4::DataExecutionStatus]
        attr_accessor :data_execution_status
      
        # ID of the data source that the chart is associated with.
        # Corresponds to the JSON property `dataSourceId`
        # @return [String]
        attr_accessor :data_source_id
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @data_execution_status = args[:data_execution_status] if args.key?(:data_execution_status)
          @data_source_id = args[:data_source_id] if args.key?(:data_source_id)
        end
      end
      
      # A column in a data source.
      class DataSourceColumn
        include Google::Apis::Core::Hashable
      
        # The formula of the calculated column.
        # Corresponds to the JSON property `formula`
        # @return [String]
        attr_accessor :formula
      
        # An unique identifier that references a data source column.
        # Corresponds to the JSON property `reference`
        # @return [Google::Apis::SheetsV4::DataSourceColumnReference]
        attr_accessor :reference
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @formula = args[:formula] if args.key?(:formula)
          @reference = args[:reference] if args.key?(:reference)
        end
      end
      
      # An unique identifier that references a data source column.
      class DataSourceColumnReference
        include Google::Apis::Core::Hashable
      
        # The display name of the column. It should be unique within a data source.
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @name = args[:name] if args.key?(:name)
        end
      end
      
      # A data source formula.
      class DataSourceFormula
        include Google::Apis::Core::Hashable
      
        # The data execution status. A data execution is created to sync a data source
        # object with the latest data from a DataSource. It is usually scheduled to run
        # at background, you can check its state to tell if an execution completes There
        # are several scenarios where a data execution is triggered to run: * Adding a
        # data source creates an associated data source sheet as well as a data
        # execution to sync the data from the data source to the sheet. * Updating a
        # data source creates a data execution to refresh the associated data source
        # sheet similarly. * You can send refresh request to explicitly refresh one or
        # multiple data source objects.
        # Corresponds to the JSON property `dataExecutionStatus`
        # @return [Google::Apis::SheetsV4::DataExecutionStatus]
        attr_accessor :data_execution_status
      
        # The ID of the data source the formula is associated with.
        # Corresponds to the JSON property `dataSourceId`
        # @return [String]
        attr_accessor :data_source_id
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @data_execution_status = args[:data_execution_status] if args.key?(:data_execution_status)
          @data_source_id = args[:data_source_id] if args.key?(:data_source_id)
        end
      end
      
      # Reference to a data source object.
      class DataSourceObjectReference
        include Google::Apis::Core::Hashable
      
        # References to a data source chart.
        # Corresponds to the JSON property `chartId`
        # @return [Fixnum]
        attr_accessor :chart_id
      
        # A coordinate in a sheet. All indexes are zero-based.
        # Corresponds to the JSON property `dataSourceFormulaCell`
        # @return [Google::Apis::SheetsV4::GridCoordinate]
        attr_accessor :data_source_formula_cell
      
        # A coordinate in a sheet. All indexes are zero-based.
        # Corresponds to the JSON property `dataSourcePivotTableAnchorCell`
        # @return [Google::Apis::SheetsV4::GridCoordinate]
        attr_accessor :data_source_pivot_table_anchor_cell
      
        # A coordinate in a sheet. All indexes are zero-based.
        # Corresponds to the JSON property `dataSourceTableAnchorCell`
        # @return [Google::Apis::SheetsV4::GridCoordinate]
        attr_accessor :data_source_table_anchor_cell
      
        # References to a DATA_SOURCE sheet.
        # Corresponds to the JSON property `sheetId`
        # @return [String]
        attr_accessor :sheet_id
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @chart_id = args[:chart_id] if args.key?(:chart_id)
          @data_source_formula_cell = args[:data_source_formula_cell] if args.key?(:data_source_formula_cell)
          @data_source_pivot_table_anchor_cell = args[:data_source_pivot_table_anchor_cell] if args.key?(:data_source_pivot_table_anchor_cell)
          @data_source_table_anchor_cell = args[:data_source_table_anchor_cell] if args.key?(:data_source_table_anchor_cell)
          @sheet_id = args[:sheet_id] if args.key?(:sheet_id)
        end
      end
      
      # A list of references to data source objects.
      class DataSourceObjectReferences
        include Google::Apis::Core::Hashable
      
        # The references.
        # Corresponds to the JSON property `references`
        # @return [Array<Google::Apis::SheetsV4::DataSourceObjectReference>]
        attr_accessor :references
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @references = args[:references] if args.key?(:references)
        end
      end
      
      # A parameter in a data source's query. The parameter allows the user to pass in
      # values from the spreadsheet into a query.
      class DataSourceParameter
        include Google::Apis::Core::Hashable
      
        # Named parameter. Must be a legitimate identifier for the DataSource that
        # supports it. For example, [BigQuery identifier](https://cloud.google.com/
        # bigquery/docs/reference/standard-sql/lexical#identifiers).
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # ID of a NamedRange. Its size must be 1x1.
        # Corresponds to the JSON property `namedRangeId`
        # @return [String]
        attr_accessor :named_range_id
      
        # A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
        # the start index is inclusive and the end index is exclusive -- [start_index,
        # end_index). Missing indexes indicate the range is unbounded on that side. For
        # example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
        # start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
        # 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
        # start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
        # sheet_id:0` The start index must always be less than or equal to the end index.
        # If the start index equals the end index, then the range is empty. Empty
        # ranges are typically not meaningful and are usually rendered in the UI as `#
        # REF!`.
        # Corresponds to the JSON property `range`
        # @return [Google::Apis::SheetsV4::GridRange]
        attr_accessor :range
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @name = args[:name] if args.key?(:name)
          @named_range_id = args[:named_range_id] if args.key?(:named_range_id)
          @range = args[:range] if args.key?(:range)
        end
      end
      
      # A schedule for data to refresh every day in a given time interval.
      class DataSourceRefreshDailySchedule
        include Google::Apis::Core::Hashable
      
        # Represents a time of day. The date and time zone are either not significant or
        # are specified elsewhere. An API may choose to allow leap seconds. Related
        # types are google.type.Date and `google.protobuf.Timestamp`.
        # Corresponds to the JSON property `startTime`
        # @return [Google::Apis::SheetsV4::TimeOfDay]
        attr_accessor :start_time
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @start_time = args[:start_time] if args.key?(:start_time)
        end
      end
      
      # A monthly schedule for data to refresh on specific days in the month in a
      # given time interval.
      class DataSourceRefreshMonthlySchedule
        include Google::Apis::Core::Hashable
      
        # Days of the month to refresh. Only 1-28 are supported, mapping to the 1st to
        # the 28th day. At lesat one day must be specified.
        # Corresponds to the JSON property `daysOfMonth`
        # @return [Array<Fixnum>]
        attr_accessor :days_of_month
      
        # Represents a time of day. The date and time zone are either not significant or
        # are specified elsewhere. An API may choose to allow leap seconds. Related
        # types are google.type.Date and `google.protobuf.Timestamp`.
        # Corresponds to the JSON property `startTime`
        # @return [Google::Apis::SheetsV4::TimeOfDay]
        attr_accessor :start_time
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @days_of_month = args[:days_of_month] if args.key?(:days_of_month)
          @start_time = args[:start_time] if args.key?(:start_time)
        end
      end
      
      # Schedule for refreshing the data source. Data sources in the spreadsheet are
      # refreshed within a time interval. You can specify the start time by clicking
      # the Scheduled Refresh button in the Sheets editor, but the interval is fixed
      # at 4 hours. For example, if you specify a start time of 8am , the refresh will
      # take place between 8am and 12pm every day.
      class DataSourceRefreshSchedule
        include Google::Apis::Core::Hashable
      
        # A schedule for data to refresh every day in a given time interval.
        # Corresponds to the JSON property `dailySchedule`
        # @return [Google::Apis::SheetsV4::DataSourceRefreshDailySchedule]
        attr_accessor :daily_schedule
      
        # True if the refresh schedule is enabled, or false otherwise.
        # Corresponds to the JSON property `enabled`
        # @return [Boolean]
        attr_accessor :enabled
        alias_method :enabled?, :enabled
      
        # A monthly schedule for data to refresh on specific days in the month in a
        # given time interval.
        # Corresponds to the JSON property `monthlySchedule`
        # @return [Google::Apis::SheetsV4::DataSourceRefreshMonthlySchedule]
        attr_accessor :monthly_schedule
      
        # Represents a time interval, encoded as a Timestamp start (inclusive) and a
        # Timestamp end (exclusive). The start must be less than or equal to the end.
        # When the start equals the end, the interval is empty (matches no time). When
        # both start and end are unspecified, the interval matches any time.
        # Corresponds to the JSON property `nextRun`
        # @return [Google::Apis::SheetsV4::Interval]
        attr_accessor :next_run
      
        # The scope of the refresh. Must be ALL_DATA_SOURCES.
        # Corresponds to the JSON property `refreshScope`
        # @return [String]
        attr_accessor :refresh_scope
      
        # A weekly schedule for data to refresh on specific days in a given time
        # interval.
        # Corresponds to the JSON property `weeklySchedule`
        # @return [Google::Apis::SheetsV4::DataSourceRefreshWeeklySchedule]
        attr_accessor :weekly_schedule
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @daily_schedule = args[:daily_schedule] if args.key?(:daily_schedule)
          @enabled = args[:enabled] if args.key?(:enabled)
          @monthly_schedule = args[:monthly_schedule] if args.key?(:monthly_schedule)
          @next_run = args[:next_run] if args.key?(:next_run)
          @refresh_scope = args[:refresh_scope] if args.key?(:refresh_scope)
          @weekly_schedule = args[:weekly_schedule] if args.key?(:weekly_schedule)
        end
      end
      
      # A weekly schedule for data to refresh on specific days in a given time
      # interval.
      class DataSourceRefreshWeeklySchedule
        include Google::Apis::Core::Hashable
      
        # Days of the week to refresh. At least one day must be specified.
        # Corresponds to the JSON property `daysOfWeek`
        # @return [Array<String>]
        attr_accessor :days_of_week
      
        # Represents a time of day. The date and time zone are either not significant or
        # are specified elsewhere. An API may choose to allow leap seconds. Related
        # types are google.type.Date and `google.protobuf.Timestamp`.
        # Corresponds to the JSON property `startTime`
        # @return [Google::Apis::SheetsV4::TimeOfDay]
        attr_accessor :start_time
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @days_of_week = args[:days_of_week] if args.key?(:days_of_week)
          @start_time = args[:start_time] if args.key?(:start_time)
        end
      end
      
      # A range along a single dimension on a DATA_SOURCE sheet.
      class DataSourceSheetDimensionRange
        include Google::Apis::Core::Hashable
      
        # The columns on the data source sheet.
        # Corresponds to the JSON property `columnReferences`
        # @return [Array<Google::Apis::SheetsV4::DataSourceColumnReference>]
        attr_accessor :column_references
      
        # The ID of the data source sheet the range is on.
        # Corresponds to the JSON property `sheetId`
        # @return [Fixnum]
        attr_accessor :sheet_id
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @column_references = args[:column_references] if args.key?(:column_references)
          @sheet_id = args[:sheet_id] if args.key?(:sheet_id)
        end
      end
      
      # Additional properties of a DATA_SOURCE sheet.
      class DataSourceSheetProperties
        include Google::Apis::Core::Hashable
      
        # The columns displayed on the sheet, corresponding to the values in RowData.
        # Corresponds to the JSON property `columns`
        # @return [Array<Google::Apis::SheetsV4::DataSourceColumn>]
        attr_accessor :columns
      
        # The data execution status. A data execution is created to sync a data source
        # object with the latest data from a DataSource. It is usually scheduled to run
        # at background, you can check its state to tell if an execution completes There
        # are several scenarios where a data execution is triggered to run: * Adding a
        # data source creates an associated data source sheet as well as a data
        # execution to sync the data from the data source to the sheet. * Updating a
        # data source creates a data execution to refresh the associated data source
        # sheet similarly. * You can send refresh request to explicitly refresh one or
        # multiple data source objects.
        # Corresponds to the JSON property `dataExecutionStatus`
        # @return [Google::Apis::SheetsV4::DataExecutionStatus]
        attr_accessor :data_execution_status
      
        # ID of the DataSource the sheet is connected to.
        # Corresponds to the JSON property `dataSourceId`
        # @return [String]
        attr_accessor :data_source_id
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @columns = args[:columns] if args.key?(:columns)
          @data_execution_status = args[:data_execution_status] if args.key?(:data_execution_status)
          @data_source_id = args[:data_source_id] if args.key?(:data_source_id)
        end
      end
      
      # This specifies the details of the data source. For example, for BigQuery, this
      # specifies information about the BigQuery source.
      class DataSourceSpec
        include Google::Apis::Core::Hashable
      
        # The specification of a BigQuery data source that's connected to a sheet.
        # Corresponds to the JSON property `bigQuery`
        # @return [Google::Apis::SheetsV4::BigQueryDataSourceSpec]
        attr_accessor :big_query
      
        # The parameters of the data source, used when querying the data source.
        # Corresponds to the JSON property `parameters`
        # @return [Array<Google::Apis::SheetsV4::DataSourceParameter>]
        attr_accessor :parameters
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @big_query = args[:big_query] if args.key?(:big_query)
          @parameters = args[:parameters] if args.key?(:parameters)
        end
      end
      
      # A data source table, which allows the user to import a static table of data
      # from the DataSource into Sheets. This is also known as "Extract" in the Sheets
      # editor.
      class DataSourceTable
        include Google::Apis::Core::Hashable
      
        # The type to select columns for the data source table. Defaults to SELECTED.
        # Corresponds to the JSON property `columnSelectionType`
        # @return [String]
        attr_accessor :column_selection_type
      
        # Columns selected for the data source table. The column_selection_type must be
        # SELECTED.
        # Corresponds to the JSON property `columns`
        # @return [Array<Google::Apis::SheetsV4::DataSourceColumnReference>]
        attr_accessor :columns
      
        # The data execution status. A data execution is created to sync a data source
        # object with the latest data from a DataSource. It is usually scheduled to run
        # at background, you can check its state to tell if an execution completes There
        # are several scenarios where a data execution is triggered to run: * Adding a
        # data source creates an associated data source sheet as well as a data
        # execution to sync the data from the data source to the sheet. * Updating a
        # data source creates a data execution to refresh the associated data source
        # sheet similarly. * You can send refresh request to explicitly refresh one or
        # multiple data source objects.
        # Corresponds to the JSON property `dataExecutionStatus`
        # @return [Google::Apis::SheetsV4::DataExecutionStatus]
        attr_accessor :data_execution_status
      
        # The ID of the data source the data source table is associated with.
        # Corresponds to the JSON property `dataSourceId`
        # @return [String]
        attr_accessor :data_source_id
      
        # Filter specifications in the data source table.
        # Corresponds to the JSON property `filterSpecs`
        # @return [Array<Google::Apis::SheetsV4::FilterSpec>]
        attr_accessor :filter_specs
      
        # The limit of rows to return. If not set, a default limit is applied. Please
        # refer to the Sheets editor for the default and max limit.
        # Corresponds to the JSON property `rowLimit`
        # @return [Fixnum]
        attr_accessor :row_limit
      
        # Sort specifications in the data source table. The result of the data source
        # table is sorted based on the sort specifications in order.
        # Corresponds to the JSON property `sortSpecs`
        # @return [Array<Google::Apis::SheetsV4::SortSpec>]
        attr_accessor :sort_specs
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @column_selection_type = args[:column_selection_type] if args.key?(:column_selection_type)
          @columns = args[:columns] if args.key?(:columns)
          @data_execution_status = args[:data_execution_status] if args.key?(:data_execution_status)
          @data_source_id = args[:data_source_id] if args.key?(:data_source_id)
          @filter_specs = args[:filter_specs] if args.key?(:filter_specs)
          @row_limit = args[:row_limit] if args.key?(:row_limit)
          @sort_specs = args[:sort_specs] if args.key?(:sort_specs)
        end
      end
      
      # A data validation rule.
      class DataValidationRule
        include Google::Apis::Core::Hashable
      
        # A condition that can evaluate to true or false. BooleanConditions are used by
        # conditional formatting, data validation, and the criteria in filters.
        # Corresponds to the JSON property `condition`
        # @return [Google::Apis::SheetsV4::BooleanCondition]
        attr_accessor :condition
      
        # A message to show the user when adding data to the cell.
        # Corresponds to the JSON property `inputMessage`
        # @return [String]
        attr_accessor :input_message
      
        # True if the UI should be customized based on the kind of condition. If true, "
        # List" conditions will show a dropdown.
        # Corresponds to the JSON property `showCustomUi`
        # @return [Boolean]
        attr_accessor :show_custom_ui
        alias_method :show_custom_ui?, :show_custom_ui
      
        # True if invalid data should be rejected.
        # Corresponds to the JSON property `strict`
        # @return [Boolean]
        attr_accessor :strict
        alias_method :strict?, :strict
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @condition = args[:condition] if args.key?(:condition)
          @input_message = args[:input_message] if args.key?(:input_message)
          @show_custom_ui = args[:show_custom_ui] if args.key?(:show_custom_ui)
          @strict = args[:strict] if args.key?(:strict)
        end
      end
      
      # Allows you to organize the date-time values in a source data column into
      # buckets based on selected parts of their date or time values. For example,
      # consider a pivot table showing sales transactions by date: +----------+--------
      # ------+ | Date | SUM of Sales | +----------+--------------+ | 1/1/2017 | $621.
      # 14 | | 2/3/2017 | $708.84 | | 5/8/2017 | $326.84 | ... +----------+------------
      # --+ Applying a date-time group rule with a DateTimeRuleType of YEAR_MONTH
      # results in the following pivot table. +--------------+--------------+ |
      # Grouped Date | SUM of Sales | +--------------+--------------+ | 2017-Jan | $53,
      # 731.78 | | 2017-Feb | $83,475.32 | | 2017-Mar | $94,385.05 | ... +-------------
      # -+--------------+
      class DateTimeRule
        include Google::Apis::Core::Hashable
      
        # The type of date-time grouping to apply.
        # Corresponds to the JSON property `type`
        # @return [String]
        attr_accessor :type
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @type = args[:type] if args.key?(:type)
        end
      end
      
      # Removes the banded range with the given ID from the spreadsheet.
      class DeleteBandingRequest
        include Google::Apis::Core::Hashable
      
        # The ID of the banded range to delete.
        # Corresponds to the JSON property `bandedRangeId`
        # @return [Fixnum]
        attr_accessor :banded_range_id
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @banded_range_id = args[:banded_range_id] if args.key?(:banded_range_id)
        end
      end
      
      # Deletes a conditional format rule at the given index. All subsequent rules'
      # indexes are decremented.
      class DeleteConditionalFormatRuleRequest
        include Google::Apis::Core::Hashable
      
        # The zero-based index of the rule to be deleted.
        # Corresponds to the JSON property `index`
        # @return [Fixnum]
        attr_accessor :index
      
        # The sheet the rule is being deleted from.
        # Corresponds to the JSON property `sheetId`
        # @return [Fixnum]
        attr_accessor :sheet_id
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @index = args[:index] if args.key?(:index)
          @sheet_id = args[:sheet_id] if args.key?(:sheet_id)
        end
      end
      
      # The result of deleting a conditional format rule.
      class DeleteConditionalFormatRuleResponse
        include Google::Apis::Core::Hashable
      
        # A rule describing a conditional format.
        # Corresponds to the JSON property `rule`
        # @return [Google::Apis::SheetsV4::ConditionalFormatRule]
        attr_accessor :rule
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @rule = args[:rule] if args.key?(:rule)
        end
      end
      
      # Deletes a data source. The request also deletes the associated data source
      # sheet, and unlinks all associated data source objects.
      class DeleteDataSourceRequest
        include Google::Apis::Core::Hashable
      
        # The ID of the data source to delete.
        # Corresponds to the JSON property `dataSourceId`
        # @return [String]
        attr_accessor :data_source_id
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @data_source_id = args[:data_source_id] if args.key?(:data_source_id)
        end
      end
      
      # A request to delete developer metadata.
      class DeleteDeveloperMetadataRequest
        include Google::Apis::Core::Hashable
      
        # Filter that describes what data should be selected or returned from a request.
        # Corresponds to the JSON property `dataFilter`
        # @return [Google::Apis::SheetsV4::DataFilter]
        attr_accessor :data_filter
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @data_filter = args[:data_filter] if args.key?(:data_filter)
        end
      end
      
      # The response from deleting developer metadata.
      class DeleteDeveloperMetadataResponse
        include Google::Apis::Core::Hashable
      
        # The metadata that was deleted.
        # Corresponds to the JSON property `deletedDeveloperMetadata`
        # @return [Array<Google::Apis::SheetsV4::DeveloperMetadata>]
        attr_accessor :deleted_developer_metadata
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @deleted_developer_metadata = args[:deleted_developer_metadata] if args.key?(:deleted_developer_metadata)
        end
      end
      
      # Deletes a group over the specified range by decrementing the depth of the
      # dimensions in the range. For example, assume the sheet has a depth-1 group
      # over B:E and a depth-2 group over C:D. Deleting a group over D:E leaves the
      # sheet with a depth-1 group over B:D and a depth-2 group over C:C.
      class DeleteDimensionGroupRequest
        include Google::Apis::Core::Hashable
      
        # A range along a single dimension on a sheet. All indexes are zero-based.
        # Indexes are half open: the start index is inclusive and the end index is
        # exclusive. Missing indexes indicate the range is unbounded on that side.
        # Corresponds to the JSON property `range`
        # @return [Google::Apis::SheetsV4::DimensionRange]
        attr_accessor :range
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @range = args[:range] if args.key?(:range)
        end
      end
      
      # The result of deleting a group.
      class DeleteDimensionGroupResponse
        include Google::Apis::Core::Hashable
      
        # All groups of a dimension after deleting a group from that dimension.
        # Corresponds to the JSON property `dimensionGroups`
        # @return [Array<Google::Apis::SheetsV4::DimensionGroup>]
        attr_accessor :dimension_groups
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @dimension_groups = args[:dimension_groups] if args.key?(:dimension_groups)
        end
      end
      
      # Deletes the dimensions from the sheet.
      class DeleteDimensionRequest
        include Google::Apis::Core::Hashable
      
        # A range along a single dimension on a sheet. All indexes are zero-based.
        # Indexes are half open: the start index is inclusive and the end index is
        # exclusive. Missing indexes indicate the range is unbounded on that side.
        # Corresponds to the JSON property `range`
        # @return [Google::Apis::SheetsV4::DimensionRange]
        attr_accessor :range
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @range = args[:range] if args.key?(:range)
        end
      end
      
      # Removes rows within this range that contain values in the specified columns
      # that are duplicates of values in any previous row. Rows with identical values
      # but different letter cases, formatting, or formulas are considered to be
      # duplicates. This request also removes duplicate rows hidden from view (for
      # example, due to a filter). When removing duplicates, the first instance of
      # each duplicate row scanning from the top downwards is kept in the resulting
      # range. Content outside of the specified range isn't removed, and rows
      # considered duplicates do not have to be adjacent to each other in the range.
      class DeleteDuplicatesRequest
        include Google::Apis::Core::Hashable
      
        # The columns in the range to analyze for duplicate values. If no columns are
        # selected then all columns are analyzed for duplicates.
        # Corresponds to the JSON property `comparisonColumns`
        # @return [Array<Google::Apis::SheetsV4::DimensionRange>]
        attr_accessor :comparison_columns
      
        # A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
        # the start index is inclusive and the end index is exclusive -- [start_index,
        # end_index). Missing indexes indicate the range is unbounded on that side. For
        # example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
        # start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
        # 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
        # start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
        # sheet_id:0` The start index must always be less than or equal to the end index.
        # If the start index equals the end index, then the range is empty. Empty
        # ranges are typically not meaningful and are usually rendered in the UI as `#
        # REF!`.
        # Corresponds to the JSON property `range`
        # @return [Google::Apis::SheetsV4::GridRange]
        attr_accessor :range
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @comparison_columns = args[:comparison_columns] if args.key?(:comparison_columns)
          @range = args[:range] if args.key?(:range)
        end
      end
      
      # The result of removing duplicates in a range.
      class DeleteDuplicatesResponse
        include Google::Apis::Core::Hashable
      
        # The number of duplicate rows removed.
        # Corresponds to the JSON property `duplicatesRemovedCount`
        # @return [Fixnum]
        attr_accessor :duplicates_removed_count
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @duplicates_removed_count = args[:duplicates_removed_count] if args.key?(:duplicates_removed_count)
        end
      end
      
      # Deletes the embedded object with the given ID.
      class DeleteEmbeddedObjectRequest
        include Google::Apis::Core::Hashable
      
        # The ID of the embedded object to delete.
        # Corresponds to the JSON property `objectId`
        # @return [Fixnum]
        attr_accessor :object_id_prop
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @object_id_prop = args[:object_id_prop] if args.key?(:object_id_prop)
        end
      end
      
      # Deletes a particular filter view.
      class DeleteFilterViewRequest
        include Google::Apis::Core::Hashable
      
        # The ID of the filter to delete.
        # Corresponds to the JSON property `filterId`
        # @return [Fixnum]
        attr_accessor :filter_id
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @filter_id = args[:filter_id] if args.key?(:filter_id)
        end
      end
      
      # Removes the named range with the given ID from the spreadsheet.
      class DeleteNamedRangeRequest
        include Google::Apis::Core::Hashable
      
        # The ID of the named range to delete.
        # Corresponds to the JSON property `namedRangeId`
        # @return [String]
        attr_accessor :named_range_id
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @named_range_id = args[:named_range_id] if args.key?(:named_range_id)
        end
      end
      
      # Deletes the protected range with the given ID.
      class DeleteProtectedRangeRequest
        include Google::Apis::Core::Hashable
      
        # The ID of the protected range to delete.
        # Corresponds to the JSON property `protectedRangeId`
        # @return [Fixnum]
        attr_accessor :protected_range_id
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @protected_range_id = args[:protected_range_id] if args.key?(:protected_range_id)
        end
      end
      
      # Deletes a range of cells, shifting other cells into the deleted area.
      class DeleteRangeRequest
        include Google::Apis::Core::Hashable
      
        # A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
        # the start index is inclusive and the end index is exclusive -- [start_index,
        # end_index). Missing indexes indicate the range is unbounded on that side. For
        # example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
        # start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
        # 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
        # start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
        # sheet_id:0` The start index must always be less than or equal to the end index.
        # If the start index equals the end index, then the range is empty. Empty
        # ranges are typically not meaningful and are usually rendered in the UI as `#
        # REF!`.
        # Corresponds to the JSON property `range`
        # @return [Google::Apis::SheetsV4::GridRange]
        attr_accessor :range
      
        # The dimension from which deleted cells will be replaced with. If ROWS,
        # existing cells will be shifted upward to replace the deleted cells. If COLUMNS,
        # existing cells will be shifted left to replace the deleted cells.
        # Corresponds to the JSON property `shiftDimension`
        # @return [String]
        attr_accessor :shift_dimension
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @range = args[:range] if args.key?(:range)
          @shift_dimension = args[:shift_dimension] if args.key?(:shift_dimension)
        end
      end
      
      # Deletes the requested sheet.
      class DeleteSheetRequest
        include Google::Apis::Core::Hashable
      
        # The ID of the sheet to delete. If the sheet is of SheetType.DATA_SOURCE type,
        # the associated DataSource is also deleted.
        # Corresponds to the JSON property `sheetId`
        # @return [Fixnum]
        attr_accessor :sheet_id
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @sheet_id = args[:sheet_id] if args.key?(:sheet_id)
        end
      end
      
      # Developer metadata associated with a location or object in a spreadsheet.
      # Developer metadata may be used to associate arbitrary data with various parts
      # of a spreadsheet and will remain associated at those locations as they move
      # around and the spreadsheet is edited. For example, if developer metadata is
      # associated with row 5 and another row is then subsequently inserted above row
      # 5, that original metadata will still be associated with the row it was first
      # associated with (what is now row 6). If the associated object is deleted its
      # metadata is deleted too.
      class DeveloperMetadata
        include Google::Apis::Core::Hashable
      
        # A location where metadata may be associated in a spreadsheet.
        # Corresponds to the JSON property `location`
        # @return [Google::Apis::SheetsV4::DeveloperMetadataLocation]
        attr_accessor :location
      
        # The spreadsheet-scoped unique ID that identifies the metadata. IDs may be
        # specified when metadata is created, otherwise one will be randomly generated
        # and assigned. Must be positive.
        # Corresponds to the JSON property `metadataId`
        # @return [Fixnum]
        attr_accessor :metadata_id
      
        # The metadata key. There may be multiple metadata in a spreadsheet with the
        # same key. Developer metadata must always have a key specified.
        # Corresponds to the JSON property `metadataKey`
        # @return [String]
        attr_accessor :metadata_key
      
        # Data associated with the metadata's key.
        # Corresponds to the JSON property `metadataValue`
        # @return [String]
        attr_accessor :metadata_value
      
        # The metadata visibility. Developer metadata must always have a visibility
        # specified.
        # Corresponds to the JSON property `visibility`
        # @return [String]
        attr_accessor :visibility
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @location = args[:location] if args.key?(:location)
          @metadata_id = args[:metadata_id] if args.key?(:metadata_id)
          @metadata_key = args[:metadata_key] if args.key?(:metadata_key)
          @metadata_value = args[:metadata_value] if args.key?(:metadata_value)
          @visibility = args[:visibility] if args.key?(:visibility)
        end
      end
      
      # A location where metadata may be associated in a spreadsheet.
      class DeveloperMetadataLocation
        include Google::Apis::Core::Hashable
      
        # A range along a single dimension on a sheet. All indexes are zero-based.
        # Indexes are half open: the start index is inclusive and the end index is
        # exclusive. Missing indexes indicate the range is unbounded on that side.
        # Corresponds to the JSON property `dimensionRange`
        # @return [Google::Apis::SheetsV4::DimensionRange]
        attr_accessor :dimension_range
      
        # The type of location this object represents. This field is read-only.
        # Corresponds to the JSON property `locationType`
        # @return [String]
        attr_accessor :location_type
      
        # The ID of the sheet when metadata is associated with an entire sheet.
        # Corresponds to the JSON property `sheetId`
        # @return [Fixnum]
        attr_accessor :sheet_id
      
        # True when metadata is associated with an entire spreadsheet.
        # Corresponds to the JSON property `spreadsheet`
        # @return [Boolean]
        attr_accessor :spreadsheet
        alias_method :spreadsheet?, :spreadsheet
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @dimension_range = args[:dimension_range] if args.key?(:dimension_range)
          @location_type = args[:location_type] if args.key?(:location_type)
          @sheet_id = args[:sheet_id] if args.key?(:sheet_id)
          @spreadsheet = args[:spreadsheet] if args.key?(:spreadsheet)
        end
      end
      
      # Selects DeveloperMetadata that matches all of the specified fields. For
      # example, if only a metadata ID is specified this considers the
      # DeveloperMetadata with that particular unique ID. If a metadata key is
      # specified, this considers all developer metadata with that key. If a key,
      # visibility, and location type are all specified, this considers all developer
      # metadata with that key and visibility that are associated with a location of
      # that type. In general, this selects all DeveloperMetadata that matches the
      # intersection of all the specified fields; any field or combination of fields
      # may be specified.
      class DeveloperMetadataLookup
        include Google::Apis::Core::Hashable
      
        # Determines how this lookup matches the location. If this field is specified as
        # EXACT, only developer metadata associated on the exact location specified is
        # matched. If this field is specified to INTERSECTING, developer metadata
        # associated on intersecting locations is also matched. If left unspecified,
        # this field assumes a default value of INTERSECTING. If this field is specified,
        # a metadataLocation must also be specified.
        # Corresponds to the JSON property `locationMatchingStrategy`
        # @return [String]
        attr_accessor :location_matching_strategy
      
        # Limits the selected developer metadata to those entries which are associated
        # with locations of the specified type. For example, when this field is
        # specified as ROW this lookup only considers developer metadata associated on
        # rows. If the field is left unspecified, all location types are considered.
        # This field cannot be specified as SPREADSHEET when the
        # locationMatchingStrategy is specified as INTERSECTING or when the
        # metadataLocation is specified as a non-spreadsheet location: spreadsheet
        # metadata cannot intersect any other developer metadata location. This field
        # also must be left unspecified when the locationMatchingStrategy is specified
        # as EXACT.
        # Corresponds to the JSON property `locationType`
        # @return [String]
        attr_accessor :location_type
      
        # Limits the selected developer metadata to that which has a matching
        # DeveloperMetadata.metadata_id.
        # Corresponds to the JSON property `metadataId`
        # @return [Fixnum]
        attr_accessor :metadata_id
      
        # Limits the selected developer metadata to that which has a matching
        # DeveloperMetadata.metadata_key.
        # Corresponds to the JSON property `metadataKey`
        # @return [String]
        attr_accessor :metadata_key
      
        # A location where metadata may be associated in a spreadsheet.
        # Corresponds to the JSON property `metadataLocation`
        # @return [Google::Apis::SheetsV4::DeveloperMetadataLocation]
        attr_accessor :metadata_location
      
        # Limits the selected developer metadata to that which has a matching
        # DeveloperMetadata.metadata_value.
        # Corresponds to the JSON property `metadataValue`
        # @return [String]
        attr_accessor :metadata_value
      
        # Limits the selected developer metadata to that which has a matching
        # DeveloperMetadata.visibility. If left unspecified, all developer metadata
        # visibile to the requesting project is considered.
        # Corresponds to the JSON property `visibility`
        # @return [String]
        attr_accessor :visibility
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @location_matching_strategy = args[:location_matching_strategy] if args.key?(:location_matching_strategy)
          @location_type = args[:location_type] if args.key?(:location_type)
          @metadata_id = args[:metadata_id] if args.key?(:metadata_id)
          @metadata_key = args[:metadata_key] if args.key?(:metadata_key)
          @metadata_location = args[:metadata_location] if args.key?(:metadata_location)
          @metadata_value = args[:metadata_value] if args.key?(:metadata_value)
          @visibility = args[:visibility] if args.key?(:visibility)
        end
      end
      
      # A group over an interval of rows or columns on a sheet, which can contain or
      # be contained within other groups. A group can be collapsed or expanded as a
      # unit on the sheet.
      class DimensionGroup
        include Google::Apis::Core::Hashable
      
        # This field is true if this group is collapsed. A collapsed group remains
        # collapsed if an overlapping group at a shallower depth is expanded. A true
        # value does not imply that all dimensions within the group are hidden, since a
        # dimension's visibility can change independently from this group property.
        # However, when this property is updated, all dimensions within it are set to
        # hidden if this field is true, or set to visible if this field is false.
        # Corresponds to the JSON property `collapsed`
        # @return [Boolean]
        attr_accessor :collapsed
        alias_method :collapsed?, :collapsed
      
        # The depth of the group, representing how many groups have a range that wholly
        # contains the range of this group.
        # Corresponds to the JSON property `depth`
        # @return [Fixnum]
        attr_accessor :depth
      
        # A range along a single dimension on a sheet. All indexes are zero-based.
        # Indexes are half open: the start index is inclusive and the end index is
        # exclusive. Missing indexes indicate the range is unbounded on that side.
        # Corresponds to the JSON property `range`
        # @return [Google::Apis::SheetsV4::DimensionRange]
        attr_accessor :range
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @collapsed = args[:collapsed] if args.key?(:collapsed)
          @depth = args[:depth] if args.key?(:depth)
          @range = args[:range] if args.key?(:range)
        end
      end
      
      # Properties about a dimension.
      class DimensionProperties
        include Google::Apis::Core::Hashable
      
        # An unique identifier that references a data source column.
        # Corresponds to the JSON property `dataSourceColumnReference`
        # @return [Google::Apis::SheetsV4::DataSourceColumnReference]
        attr_accessor :data_source_column_reference
      
        # The developer metadata associated with a single row or column.
        # Corresponds to the JSON property `developerMetadata`
        # @return [Array<Google::Apis::SheetsV4::DeveloperMetadata>]
        attr_accessor :developer_metadata
      
        # True if this dimension is being filtered. This field is read-only.
        # Corresponds to the JSON property `hiddenByFilter`
        # @return [Boolean]
        attr_accessor :hidden_by_filter
        alias_method :hidden_by_filter?, :hidden_by_filter
      
        # True if this dimension is explicitly hidden.
        # Corresponds to the JSON property `hiddenByUser`
        # @return [Boolean]
        attr_accessor :hidden_by_user
        alias_method :hidden_by_user?, :hidden_by_user
      
        # The height (if a row) or width (if a column) of the dimension in pixels.
        # Corresponds to the JSON property `pixelSize`
        # @return [Fixnum]
        attr_accessor :pixel_size
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @data_source_column_reference = args[:data_source_column_reference] if args.key?(:data_source_column_reference)
          @developer_metadata = args[:developer_metadata] if args.key?(:developer_metadata)
          @hidden_by_filter = args[:hidden_by_filter] if args.key?(:hidden_by_filter)
          @hidden_by_user = args[:hidden_by_user] if args.key?(:hidden_by_user)
          @pixel_size = args[:pixel_size] if args.key?(:pixel_size)
        end
      end
      
      # A range along a single dimension on a sheet. All indexes are zero-based.
      # Indexes are half open: the start index is inclusive and the end index is
      # exclusive. Missing indexes indicate the range is unbounded on that side.
      class DimensionRange
        include Google::Apis::Core::Hashable
      
        # The dimension of the span.
        # Corresponds to the JSON property `dimension`
        # @return [String]
        attr_accessor :dimension
      
        # The end (exclusive) of the span, or not set if unbounded.
        # Corresponds to the JSON property `endIndex`
        # @return [Fixnum]
        attr_accessor :end_index
      
        # The sheet this span is on.
        # Corresponds to the JSON property `sheetId`
        # @return [Fixnum]
        attr_accessor :sheet_id
      
        # The start (inclusive) of the span, or not set if unbounded.
        # Corresponds to the JSON property `startIndex`
        # @return [Fixnum]
        attr_accessor :start_index
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @dimension = args[:dimension] if args.key?(:dimension)
          @end_index = args[:end_index] if args.key?(:end_index)
          @sheet_id = args[:sheet_id] if args.key?(:sheet_id)
          @start_index = args[:start_index] if args.key?(:start_index)
        end
      end
      
      # Duplicates a particular filter view.
      class DuplicateFilterViewRequest
        include Google::Apis::Core::Hashable
      
        # The ID of the filter being duplicated.
        # Corresponds to the JSON property `filterId`
        # @return [Fixnum]
        attr_accessor :filter_id
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @filter_id = args[:filter_id] if args.key?(:filter_id)
        end
      end
      
      # The result of a filter view being duplicated.
      class DuplicateFilterViewResponse
        include Google::Apis::Core::Hashable
      
        # A filter view.
        # Corresponds to the JSON property `filter`
        # @return [Google::Apis::SheetsV4::FilterView]
        attr_accessor :filter
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @filter = args[:filter] if args.key?(:filter)
        end
      end
      
      # Duplicates the contents of a sheet.
      class DuplicateSheetRequest
        include Google::Apis::Core::Hashable
      
        # The zero-based index where the new sheet should be inserted. The index of all
        # sheets after this are incremented.
        # Corresponds to the JSON property `insertSheetIndex`
        # @return [Fixnum]
        attr_accessor :insert_sheet_index
      
        # If set, the ID of the new sheet. If not set, an ID is chosen. If set, the ID
        # must not conflict with any existing sheet ID. If set, it must be non-negative.
        # Corresponds to the JSON property `newSheetId`
        # @return [Fixnum]
        attr_accessor :new_sheet_id
      
        # The name of the new sheet. If empty, a new name is chosen for you.
        # Corresponds to the JSON property `newSheetName`
        # @return [String]
        attr_accessor :new_sheet_name
      
        # The sheet to duplicate. If the source sheet is of DATA_SOURCE type, its
        # backing DataSource is also duplicated and associated with the new copy of the
        # sheet. No data execution is triggered, the grid data of this sheet is also
        # copied over but only available after the batch request completes.
        # Corresponds to the JSON property `sourceSheetId`
        # @return [Fixnum]
        attr_accessor :source_sheet_id
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @insert_sheet_index = args[:insert_sheet_index] if args.key?(:insert_sheet_index)
          @new_sheet_id = args[:new_sheet_id] if args.key?(:new_sheet_id)
          @new_sheet_name = args[:new_sheet_name] if args.key?(:new_sheet_name)
          @source_sheet_id = args[:source_sheet_id] if args.key?(:source_sheet_id)
        end
      end
      
      # The result of duplicating a sheet.
      class DuplicateSheetResponse
        include Google::Apis::Core::Hashable
      
        # Properties of a sheet.
        # Corresponds to the JSON property `properties`
        # @return [Google::Apis::SheetsV4::SheetProperties]
        attr_accessor :properties
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @properties = args[:properties] if args.key?(:properties)
        end
      end
      
      # The editors of a protected range.
      class Editors
        include Google::Apis::Core::Hashable
      
        # True if anyone in the document's domain has edit access to the protected range.
        # Domain protection is only supported on documents within a domain.
        # Corresponds to the JSON property `domainUsersCanEdit`
        # @return [Boolean]
        attr_accessor :domain_users_can_edit
        alias_method :domain_users_can_edit?, :domain_users_can_edit
      
        # The email addresses of groups with edit access to the protected range.
        # Corresponds to the JSON property `groups`
        # @return [Array<String>]
        attr_accessor :groups
      
        # The email addresses of users with edit access to the protected range.
        # Corresponds to the JSON property `users`
        # @return [Array<String>]
        attr_accessor :users
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @domain_users_can_edit = args[:domain_users_can_edit] if args.key?(:domain_users_can_edit)
          @groups = args[:groups] if args.key?(:groups)
          @users = args[:users] if args.key?(:users)
        end
      end
      
      # A chart embedded in a sheet.
      class EmbeddedChart
        include Google::Apis::Core::Hashable
      
        # A border along an embedded object.
        # Corresponds to the JSON property `border`
        # @return [Google::Apis::SheetsV4::EmbeddedObjectBorder]
        attr_accessor :border
      
        # The ID of the chart.
        # Corresponds to the JSON property `chartId`
        # @return [Fixnum]
        attr_accessor :chart_id
      
        # The position of an embedded object such as a chart.
        # Corresponds to the JSON property `position`
        # @return [Google::Apis::SheetsV4::EmbeddedObjectPosition]
        attr_accessor :position
      
        # The specifications of a chart.
        # Corresponds to the JSON property `spec`
        # @return [Google::Apis::SheetsV4::ChartSpec]
        attr_accessor :spec
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @border = args[:border] if args.key?(:border)
          @chart_id = args[:chart_id] if args.key?(:chart_id)
          @position = args[:position] if args.key?(:position)
          @spec = args[:spec] if args.key?(:spec)
        end
      end
      
      # A border along an embedded object.
      class EmbeddedObjectBorder
        include Google::Apis::Core::Hashable
      
        # Represents a color in the RGBA color space. This representation is designed
        # for simplicity of conversion to/from color representations in various
        # languages over compactness; for example, the fields of this representation can
        # be trivially provided to the constructor of "java.awt.Color" in Java; it can
        # also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
        # method in iOS; and, with just a little work, it can be easily formatted into a
        # CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
        # information about the absolute color space that should be used to interpret
        # the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
        # applications SHOULD assume the sRGB color space. Note: when color equality
        # needs to be decided, implementations, unless documented otherwise, will treat
        # two colors to be equal if all their red, green, blue and alpha values each
        # differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
        # public static java.awt.Color fromProto(Color protocolor) ` float alpha =
        # protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
        # java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
        # ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
        # float) color.getRed(); float green = (float) color.getGreen(); float blue = (
        # float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
        # = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
        # .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
        # ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
        # denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
        # Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
        # protocolor red]; float green = [protocolor green]; float blue = [protocolor
        # blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
        # alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
        # colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
        # UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
        # green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
        # alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
        # blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
        # [result autorelease]; return result; ` // ... Example (JavaScript): // ...
        # var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
        # var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
        # var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
        # var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
        # rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
        # 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
        # ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
        # ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
        # hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
        # var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
        # resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
        # join(''); `; // ...
        # Corresponds to the JSON property `color`
        # @return [Google::Apis::SheetsV4::Color]
        attr_accessor :color
      
        # A color value.
        # Corresponds to the JSON property `colorStyle`
        # @return [Google::Apis::SheetsV4::ColorStyle]
        attr_accessor :color_style
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @color = args[:color] if args.key?(:color)
          @color_style = args[:color_style] if args.key?(:color_style)
        end
      end
      
      # The position of an embedded object such as a chart.
      class EmbeddedObjectPosition
        include Google::Apis::Core::Hashable
      
        # If true, the embedded object is put on a new sheet whose ID is chosen for you.
        # Used only when writing.
        # Corresponds to the JSON property `newSheet`
        # @return [Boolean]
        attr_accessor :new_sheet
        alias_method :new_sheet?, :new_sheet
      
        # The location an object is overlaid on top of a grid.
        # Corresponds to the JSON property `overlayPosition`
        # @return [Google::Apis::SheetsV4::OverlayPosition]
        attr_accessor :overlay_position
      
        # The sheet this is on. Set only if the embedded object is on its own sheet.
        # Must be non-negative.
        # Corresponds to the JSON property `sheetId`
        # @return [Fixnum]
        attr_accessor :sheet_id
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @new_sheet = args[:new_sheet] if args.key?(:new_sheet)
          @overlay_position = args[:overlay_position] if args.key?(:overlay_position)
          @sheet_id = args[:sheet_id] if args.key?(:sheet_id)
        end
      end
      
      # An error in a cell.
      class ErrorValue
        include Google::Apis::Core::Hashable
      
        # A message with more information about the error (in the spreadsheet's locale).
        # Corresponds to the JSON property `message`
        # @return [String]
        attr_accessor :message
      
        # The type of error.
        # Corresponds to the JSON property `type`
        # @return [String]
        attr_accessor :type
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @message = args[:message] if args.key?(:message)
          @type = args[:type] if args.key?(:type)
        end
      end
      
      # The kinds of value that a cell in a spreadsheet can have.
      class ExtendedValue
        include Google::Apis::Core::Hashable
      
        # Represents a boolean value.
        # Corresponds to the JSON property `boolValue`
        # @return [Boolean]
        attr_accessor :bool_value
        alias_method :bool_value?, :bool_value
      
        # An error in a cell.
        # Corresponds to the JSON property `errorValue`
        # @return [Google::Apis::SheetsV4::ErrorValue]
        attr_accessor :error_value
      
        # Represents a formula.
        # Corresponds to the JSON property `formulaValue`
        # @return [String]
        attr_accessor :formula_value
      
        # Represents a double value. Note: Dates, Times and DateTimes are represented as
        # doubles in "serial number" format.
        # Corresponds to the JSON property `numberValue`
        # @return [Float]
        attr_accessor :number_value
      
        # Represents a string value. Leading single quotes are not included. For example,
        # if the user typed `'123` into the UI, this would be represented as a `
        # stringValue` of `"123"`.
        # Corresponds to the JSON property `stringValue`
        # @return [String]
        attr_accessor :string_value
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @bool_value = args[:bool_value] if args.key?(:bool_value)
          @error_value = args[:error_value] if args.key?(:error_value)
          @formula_value = args[:formula_value] if args.key?(:formula_value)
          @number_value = args[:number_value] if args.key?(:number_value)
          @string_value = args[:string_value] if args.key?(:string_value)
        end
      end
      
      # Criteria for showing/hiding rows in a filter or filter view.
      class FilterCriteria
        include Google::Apis::Core::Hashable
      
        # A condition that can evaluate to true or false. BooleanConditions are used by
        # conditional formatting, data validation, and the criteria in filters.
        # Corresponds to the JSON property `condition`
        # @return [Google::Apis::SheetsV4::BooleanCondition]
        attr_accessor :condition
      
        # Values that should be hidden.
        # Corresponds to the JSON property `hiddenValues`
        # @return [Array<String>]
        attr_accessor :hidden_values
      
        # Represents a color in the RGBA color space. This representation is designed
        # for simplicity of conversion to/from color representations in various
        # languages over compactness; for example, the fields of this representation can
        # be trivially provided to the constructor of "java.awt.Color" in Java; it can
        # also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
        # method in iOS; and, with just a little work, it can be easily formatted into a
        # CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
        # information about the absolute color space that should be used to interpret
        # the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
        # applications SHOULD assume the sRGB color space. Note: when color equality
        # needs to be decided, implementations, unless documented otherwise, will treat
        # two colors to be equal if all their red, green, blue and alpha values each
        # differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
        # public static java.awt.Color fromProto(Color protocolor) ` float alpha =
        # protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
        # java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
        # ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
        # float) color.getRed(); float green = (float) color.getGreen(); float blue = (
        # float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
        # = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
        # .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
        # ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
        # denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
        # Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
        # protocolor red]; float green = [protocolor green]; float blue = [protocolor
        # blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
        # alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
        # colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
        # UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
        # green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
        # alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
        # blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
        # [result autorelease]; return result; ` // ... Example (JavaScript): // ...
        # var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
        # var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
        # var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
        # var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
        # rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
        # 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
        # ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
        # ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
        # hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
        # var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
        # resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
        # join(''); `; // ...
        # Corresponds to the JSON property `visibleBackgroundColor`
        # @return [Google::Apis::SheetsV4::Color]
        attr_accessor :visible_background_color
      
        # A color value.
        # Corresponds to the JSON property `visibleBackgroundColorStyle`
        # @return [Google::Apis::SheetsV4::ColorStyle]
        attr_accessor :visible_background_color_style
      
        # Represents a color in the RGBA color space. This representation is designed
        # for simplicity of conversion to/from color representations in various
        # languages over compactness; for example, the fields of this representation can
        # be trivially provided to the constructor of "java.awt.Color" in Java; it can
        # also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
        # method in iOS; and, with just a little work, it can be easily formatted into a
        # CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
        # information about the absolute color space that should be used to interpret
        # the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
        # applications SHOULD assume the sRGB color space. Note: when color equality
        # needs to be decided, implementations, unless documented otherwise, will treat
        # two colors to be equal if all their red, green, blue and alpha values each
        # differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
        # public static java.awt.Color fromProto(Color protocolor) ` float alpha =
        # protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
        # java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
        # ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
        # float) color.getRed(); float green = (float) color.getGreen(); float blue = (
        # float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
        # = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
        # .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
        # ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
        # denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
        # Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
        # protocolor red]; float green = [protocolor green]; float blue = [protocolor
        # blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
        # alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
        # colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
        # UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
        # green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
        # alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
        # blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
        # [result autorelease]; return result; ` // ... Example (JavaScript): // ...
        # var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
        # var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
        # var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
        # var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
        # rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
        # 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
        # ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
        # ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
        # hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
        # var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
        # resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
        # join(''); `; // ...
        # Corresponds to the JSON property `visibleForegroundColor`
        # @return [Google::Apis::SheetsV4::Color]
        attr_accessor :visible_foreground_color
      
        # A color value.
        # Corresponds to the JSON property `visibleForegroundColorStyle`
        # @return [Google::Apis::SheetsV4::ColorStyle]
        attr_accessor :visible_foreground_color_style
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @condition = args[:condition] if args.key?(:condition)
          @hidden_values = args[:hidden_values] if args.key?(:hidden_values)
          @visible_background_color = args[:visible_background_color] if args.key?(:visible_background_color)
          @visible_background_color_style = args[:visible_background_color_style] if args.key?(:visible_background_color_style)
          @visible_foreground_color = args[:visible_foreground_color] if args.key?(:visible_foreground_color)
          @visible_foreground_color_style = args[:visible_foreground_color_style] if args.key?(:visible_foreground_color_style)
        end
      end
      
      # The filter criteria associated with a specific column.
      class FilterSpec
        include Google::Apis::Core::Hashable
      
        # The column index.
        # Corresponds to the JSON property `columnIndex`
        # @return [Fixnum]
        attr_accessor :column_index
      
        # An unique identifier that references a data source column.
        # Corresponds to the JSON property `dataSourceColumnReference`
        # @return [Google::Apis::SheetsV4::DataSourceColumnReference]
        attr_accessor :data_source_column_reference
      
        # Criteria for showing/hiding rows in a filter or filter view.
        # Corresponds to the JSON property `filterCriteria`
        # @return [Google::Apis::SheetsV4::FilterCriteria]
        attr_accessor :filter_criteria
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @column_index = args[:column_index] if args.key?(:column_index)
          @data_source_column_reference = args[:data_source_column_reference] if args.key?(:data_source_column_reference)
          @filter_criteria = args[:filter_criteria] if args.key?(:filter_criteria)
        end
      end
      
      # A filter view.
      class FilterView
        include Google::Apis::Core::Hashable
      
        # The criteria for showing/hiding values per column. The map's key is the column
        # index, and the value is the criteria for that column. This field is deprecated
        # in favor of filter_specs.
        # Corresponds to the JSON property `criteria`
        # @return [Hash<String,Google::Apis::SheetsV4::FilterCriteria>]
        attr_accessor :criteria
      
        # The filter criteria for showing/hiding values per column. Both criteria and
        # filter_specs are populated in responses. If both fields are specified in an
        # update request, this field takes precedence.
        # Corresponds to the JSON property `filterSpecs`
        # @return [Array<Google::Apis::SheetsV4::FilterSpec>]
        attr_accessor :filter_specs
      
        # The ID of the filter view.
        # Corresponds to the JSON property `filterViewId`
        # @return [Fixnum]
        attr_accessor :filter_view_id
      
        # The named range this filter view is backed by, if any. When writing, only one
        # of range or named_range_id may be set.
        # Corresponds to the JSON property `namedRangeId`
        # @return [String]
        attr_accessor :named_range_id
      
        # A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
        # the start index is inclusive and the end index is exclusive -- [start_index,
        # end_index). Missing indexes indicate the range is unbounded on that side. For
        # example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
        # start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
        # 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
        # start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
        # sheet_id:0` The start index must always be less than or equal to the end index.
        # If the start index equals the end index, then the range is empty. Empty
        # ranges are typically not meaningful and are usually rendered in the UI as `#
        # REF!`.
        # Corresponds to the JSON property `range`
        # @return [Google::Apis::SheetsV4::GridRange]
        attr_accessor :range
      
        # The sort order per column. Later specifications are used when values are equal
        # in the earlier specifications.
        # Corresponds to the JSON property `sortSpecs`
        # @return [Array<Google::Apis::SheetsV4::SortSpec>]
        attr_accessor :sort_specs
      
        # The name of the filter view.
        # Corresponds to the JSON property `title`
        # @return [String]
        attr_accessor :title
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @criteria = args[:criteria] if args.key?(:criteria)
          @filter_specs = args[:filter_specs] if args.key?(:filter_specs)
          @filter_view_id = args[:filter_view_id] if args.key?(:filter_view_id)
          @named_range_id = args[:named_range_id] if args.key?(:named_range_id)
          @range = args[:range] if args.key?(:range)
          @sort_specs = args[:sort_specs] if args.key?(:sort_specs)
          @title = args[:title] if args.key?(:title)
        end
      end
      
      # Finds and replaces data in cells over a range, sheet, or all sheets.
      class FindReplaceRequest
        include Google::Apis::Core::Hashable
      
        # True to find/replace over all sheets.
        # Corresponds to the JSON property `allSheets`
        # @return [Boolean]
        attr_accessor :all_sheets
        alias_method :all_sheets?, :all_sheets
      
        # The value to search.
        # Corresponds to the JSON property `find`
        # @return [String]
        attr_accessor :find
      
        # True if the search should include cells with formulas. False to skip cells
        # with formulas.
        # Corresponds to the JSON property `includeFormulas`
        # @return [Boolean]
        attr_accessor :include_formulas
        alias_method :include_formulas?, :include_formulas
      
        # True if the search is case sensitive.
        # Corresponds to the JSON property `matchCase`
        # @return [Boolean]
        attr_accessor :match_case
        alias_method :match_case?, :match_case
      
        # True if the find value should match the entire cell.
        # Corresponds to the JSON property `matchEntireCell`
        # @return [Boolean]
        attr_accessor :match_entire_cell
        alias_method :match_entire_cell?, :match_entire_cell
      
        # A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
        # the start index is inclusive and the end index is exclusive -- [start_index,
        # end_index). Missing indexes indicate the range is unbounded on that side. For
        # example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
        # start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
        # 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
        # start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
        # sheet_id:0` The start index must always be less than or equal to the end index.
        # If the start index equals the end index, then the range is empty. Empty
        # ranges are typically not meaningful and are usually rendered in the UI as `#
        # REF!`.
        # Corresponds to the JSON property `range`
        # @return [Google::Apis::SheetsV4::GridRange]
        attr_accessor :range
      
        # The value to use as the replacement.
        # Corresponds to the JSON property `replacement`
        # @return [String]
        attr_accessor :replacement
      
        # True if the find value is a regex. The regular expression and replacement
        # should follow Java regex rules at https://docs.oracle.com/javase/8/docs/api/
        # java/util/regex/Pattern.html. The replacement string is allowed to refer to
        # capturing groups. For example, if one cell has the contents `"Google Sheets"`
        # and another has `"Google Docs"`, then searching for `"o.* (.*)"` with a
        # replacement of `"$1 Rocks"` would change the contents of the cells to `"
        # GSheets Rocks"` and `"GDocs Rocks"` respectively.
        # Corresponds to the JSON property `searchByRegex`
        # @return [Boolean]
        attr_accessor :search_by_regex
        alias_method :search_by_regex?, :search_by_regex
      
        # The sheet to find/replace over.
        # Corresponds to the JSON property `sheetId`
        # @return [Fixnum]
        attr_accessor :sheet_id
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @all_sheets = args[:all_sheets] if args.key?(:all_sheets)
          @find = args[:find] if args.key?(:find)
          @include_formulas = args[:include_formulas] if args.key?(:include_formulas)
          @match_case = args[:match_case] if args.key?(:match_case)
          @match_entire_cell = args[:match_entire_cell] if args.key?(:match_entire_cell)
          @range = args[:range] if args.key?(:range)
          @replacement = args[:replacement] if args.key?(:replacement)
          @search_by_regex = args[:search_by_regex] if args.key?(:search_by_regex)
          @sheet_id = args[:sheet_id] if args.key?(:sheet_id)
        end
      end
      
      # The result of the find/replace.
      class FindReplaceResponse
        include Google::Apis::Core::Hashable
      
        # The number of formula cells changed.
        # Corresponds to the JSON property `formulasChanged`
        # @return [Fixnum]
        attr_accessor :formulas_changed
      
        # The number of occurrences (possibly multiple within a cell) changed. For
        # example, if replacing `"e"` with `"o"` in `"Google Sheets"`, this would be `"3"
        # ` because `"Google Sheets"` -> `"Googlo Shoots"`.
        # Corresponds to the JSON property `occurrencesChanged`
        # @return [Fixnum]
        attr_accessor :occurrences_changed
      
        # The number of rows changed.
        # Corresponds to the JSON property `rowsChanged`
        # @return [Fixnum]
        attr_accessor :rows_changed
      
        # The number of sheets changed.
        # Corresponds to the JSON property `sheetsChanged`
        # @return [Fixnum]
        attr_accessor :sheets_changed
      
        # The number of non-formula cells changed.
        # Corresponds to the JSON property `valuesChanged`
        # @return [Fixnum]
        attr_accessor :values_changed
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @formulas_changed = args[:formulas_changed] if args.key?(:formulas_changed)
          @occurrences_changed = args[:occurrences_changed] if args.key?(:occurrences_changed)
          @rows_changed = args[:rows_changed] if args.key?(:rows_changed)
          @sheets_changed = args[:sheets_changed] if args.key?(:sheets_changed)
          @values_changed = args[:values_changed] if args.key?(:values_changed)
        end
      end
      
      # The request for retrieving a Spreadsheet.
      class GetSpreadsheetByDataFilterRequest
        include Google::Apis::Core::Hashable
      
        # The DataFilters used to select which ranges to retrieve from the spreadsheet.
        # Corresponds to the JSON property `dataFilters`
        # @return [Array<Google::Apis::SheetsV4::DataFilter>]
        attr_accessor :data_filters
      
        # True if grid data should be returned. This parameter is ignored if a field
        # mask was set in the request.
        # Corresponds to the JSON property `includeGridData`
        # @return [Boolean]
        attr_accessor :include_grid_data
        alias_method :include_grid_data?, :include_grid_data
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @data_filters = args[:data_filters] if args.key?(:data_filters)
          @include_grid_data = args[:include_grid_data] if args.key?(:include_grid_data)
        end
      end
      
      # A rule that applies a gradient color scale format, based on the interpolation
      # points listed. The format of a cell will vary based on its contents as
      # compared to the values of the interpolation points.
      class GradientRule
        include Google::Apis::Core::Hashable
      
        # A single interpolation point on a gradient conditional format. These pin the
        # gradient color scale according to the color, type and value chosen.
        # Corresponds to the JSON property `maxpoint`
        # @return [Google::Apis::SheetsV4::InterpolationPoint]
        attr_accessor :maxpoint
      
        # A single interpolation point on a gradient conditional format. These pin the
        # gradient color scale according to the color, type and value chosen.
        # Corresponds to the JSON property `midpoint`
        # @return [Google::Apis::SheetsV4::InterpolationPoint]
        attr_accessor :midpoint
      
        # A single interpolation point on a gradient conditional format. These pin the
        # gradient color scale according to the color, type and value chosen.
        # Corresponds to the JSON property `minpoint`
        # @return [Google::Apis::SheetsV4::InterpolationPoint]
        attr_accessor :minpoint
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @maxpoint = args[:maxpoint] if args.key?(:maxpoint)
          @midpoint = args[:midpoint] if args.key?(:midpoint)
          @minpoint = args[:minpoint] if args.key?(:minpoint)
        end
      end
      
      # A coordinate in a sheet. All indexes are zero-based.
      class GridCoordinate
        include Google::Apis::Core::Hashable
      
        # The column index of the coordinate.
        # Corresponds to the JSON property `columnIndex`
        # @return [Fixnum]
        attr_accessor :column_index
      
        # The row index of the coordinate.
        # Corresponds to the JSON property `rowIndex`
        # @return [Fixnum]
        attr_accessor :row_index
      
        # The sheet this coordinate is on.
        # Corresponds to the JSON property `sheetId`
        # @return [Fixnum]
        attr_accessor :sheet_id
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @column_index = args[:column_index] if args.key?(:column_index)
          @row_index = args[:row_index] if args.key?(:row_index)
          @sheet_id = args[:sheet_id] if args.key?(:sheet_id)
        end
      end
      
      # Data in the grid, as well as metadata about the dimensions.
      class GridData
        include Google::Apis::Core::Hashable
      
        # Metadata about the requested columns in the grid, starting with the column in
        # start_column.
        # Corresponds to the JSON property `columnMetadata`
        # @return [Array<Google::Apis::SheetsV4::DimensionProperties>]
        attr_accessor :column_metadata
      
        # The data in the grid, one entry per row, starting with the row in startRow.
        # The values in RowData will correspond to columns starting at start_column.
        # Corresponds to the JSON property `rowData`
        # @return [Array<Google::Apis::SheetsV4::RowData>]
        attr_accessor :row_data
      
        # Metadata about the requested rows in the grid, starting with the row in
        # start_row.
        # Corresponds to the JSON property `rowMetadata`
        # @return [Array<Google::Apis::SheetsV4::DimensionProperties>]
        attr_accessor :row_metadata
      
        # The first column this GridData refers to, zero-based.
        # Corresponds to the JSON property `startColumn`
        # @return [Fixnum]
        attr_accessor :start_column
      
        # The first row this GridData refers to, zero-based.
        # Corresponds to the JSON property `startRow`
        # @return [Fixnum]
        attr_accessor :start_row
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @column_metadata = args[:column_metadata] if args.key?(:column_metadata)
          @row_data = args[:row_data] if args.key?(:row_data)
          @row_metadata = args[:row_metadata] if args.key?(:row_metadata)
          @start_column = args[:start_column] if args.key?(:start_column)
          @start_row = args[:start_row] if args.key?(:start_row)
        end
      end
      
      # Properties of a grid.
      class GridProperties
        include Google::Apis::Core::Hashable
      
        # The number of columns in the grid.
        # Corresponds to the JSON property `columnCount`
        # @return [Fixnum]
        attr_accessor :column_count
      
        # True if the column grouping control toggle is shown after the group.
        # Corresponds to the JSON property `columnGroupControlAfter`
        # @return [Boolean]
        attr_accessor :column_group_control_after
        alias_method :column_group_control_after?, :column_group_control_after
      
        # The number of columns that are frozen in the grid.
        # Corresponds to the JSON property `frozenColumnCount`
        # @return [Fixnum]
        attr_accessor :frozen_column_count
      
        # The number of rows that are frozen in the grid.
        # Corresponds to the JSON property `frozenRowCount`
        # @return [Fixnum]
        attr_accessor :frozen_row_count
      
        # True if the grid isn't showing gridlines in the UI.
        # Corresponds to the JSON property `hideGridlines`
        # @return [Boolean]
        attr_accessor :hide_gridlines
        alias_method :hide_gridlines?, :hide_gridlines
      
        # The number of rows in the grid.
        # Corresponds to the JSON property `rowCount`
        # @return [Fixnum]
        attr_accessor :row_count
      
        # True if the row grouping control toggle is shown after the group.
        # Corresponds to the JSON property `rowGroupControlAfter`
        # @return [Boolean]
        attr_accessor :row_group_control_after
        alias_method :row_group_control_after?, :row_group_control_after
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @column_count = args[:column_count] if args.key?(:column_count)
          @column_group_control_after = args[:column_group_control_after] if args.key?(:column_group_control_after)
          @frozen_column_count = args[:frozen_column_count] if args.key?(:frozen_column_count)
          @frozen_row_count = args[:frozen_row_count] if args.key?(:frozen_row_count)
          @hide_gridlines = args[:hide_gridlines] if args.key?(:hide_gridlines)
          @row_count = args[:row_count] if args.key?(:row_count)
          @row_group_control_after = args[:row_group_control_after] if args.key?(:row_group_control_after)
        end
      end
      
      # A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
      # the start index is inclusive and the end index is exclusive -- [start_index,
      # end_index). Missing indexes indicate the range is unbounded on that side. For
      # example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
      # start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
      # 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
      # start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
      # start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
      # start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
      # sheet_id:0` The start index must always be less than or equal to the end index.
      # If the start index equals the end index, then the range is empty. Empty
      # ranges are typically not meaningful and are usually rendered in the UI as `#
      # REF!`.
      class GridRange
        include Google::Apis::Core::Hashable
      
        # The end column (exclusive) of the range, or not set if unbounded.
        # Corresponds to the JSON property `endColumnIndex`
        # @return [Fixnum]
        attr_accessor :end_column_index
      
        # The end row (exclusive) of the range, or not set if unbounded.
        # Corresponds to the JSON property `endRowIndex`
        # @return [Fixnum]
        attr_accessor :end_row_index
      
        # The sheet this range is on.
        # Corresponds to the JSON property `sheetId`
        # @return [Fixnum]
        attr_accessor :sheet_id
      
        # The start column (inclusive) of the range, or not set if unbounded.
        # Corresponds to the JSON property `startColumnIndex`
        # @return [Fixnum]
        attr_accessor :start_column_index
      
        # The start row (inclusive) of the range, or not set if unbounded.
        # Corresponds to the JSON property `startRowIndex`
        # @return [Fixnum]
        attr_accessor :start_row_index
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @end_column_index = args[:end_column_index] if args.key?(:end_column_index)
          @end_row_index = args[:end_row_index] if args.key?(:end_row_index)
          @sheet_id = args[:sheet_id] if args.key?(:sheet_id)
          @start_column_index = args[:start_column_index] if args.key?(:start_column_index)
          @start_row_index = args[:start_row_index] if args.key?(:start_row_index)
        end
      end
      
      # A histogram chart. A histogram chart groups data items into bins, displaying
      # each bin as a column of stacked items. Histograms are used to display the
      # distribution of a dataset. Each column of items represents a range into which
      # those items fall. The number of bins can be chosen automatically or specified
      # explicitly.
      class HistogramChartSpec
        include Google::Apis::Core::Hashable
      
        # By default the bucket size (the range of values stacked in a single column) is
        # chosen automatically, but it may be overridden here. E.g., A bucket size of 1.
        # 5 results in buckets from 0 - 1.5, 1.5 - 3.0, etc. Cannot be negative. This
        # field is optional.
        # Corresponds to the JSON property `bucketSize`
        # @return [Float]
        attr_accessor :bucket_size
      
        # The position of the chart legend.
        # Corresponds to the JSON property `legendPosition`
        # @return [String]
        attr_accessor :legend_position
      
        # The outlier percentile is used to ensure that outliers do not adversely affect
        # the calculation of bucket sizes. For example, setting an outlier percentile of
        # 0.05 indicates that the top and bottom 5% of values when calculating buckets.
        # The values are still included in the chart, they will be added to the first or
        # last buckets instead of their own buckets. Must be between 0.0 and 0.5.
        # Corresponds to the JSON property `outlierPercentile`
        # @return [Float]
        attr_accessor :outlier_percentile
      
        # The series for a histogram may be either a single series of values to be
        # bucketed or multiple series, each of the same length, containing the name of
        # the series followed by the values to be bucketed for that series.
        # Corresponds to the JSON property `series`
        # @return [Array<Google::Apis::SheetsV4::HistogramSeries>]
        attr_accessor :series
      
        # Whether horizontal divider lines should be displayed between items in each
        # column.
        # Corresponds to the JSON property `showItemDividers`
        # @return [Boolean]
        attr_accessor :show_item_dividers
        alias_method :show_item_dividers?, :show_item_dividers
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @bucket_size = args[:bucket_size] if args.key?(:bucket_size)
          @legend_position = args[:legend_position] if args.key?(:legend_position)
          @outlier_percentile = args[:outlier_percentile] if args.key?(:outlier_percentile)
          @series = args[:series] if args.key?(:series)
          @show_item_dividers = args[:show_item_dividers] if args.key?(:show_item_dividers)
        end
      end
      
      # Allows you to organize the numeric values in a source data column into buckets
      # of a constant size. All values from HistogramRule.start to HistogramRule.end
      # are placed into groups of size HistogramRule.interval. In addition, all values
      # below HistogramRule.start are placed in one group, and all values above
      # HistogramRule.end are placed in another. Only HistogramRule.interval is
      # required, though if HistogramRule.start and HistogramRule.end are both
      # provided, HistogramRule.start must be less than HistogramRule.end. For example,
      # a pivot table showing average purchase amount by age that has 50+ rows: +-----
      # +-------------------+ | Age | AVERAGE of Amount | +-----+-------------------+ |
      # 16 | $27.13 | | 17 | $5.24 | | 18 | $20.15 | ... +-----+-------------------+
      # could be turned into a pivot table that looks like the one below by applying a
      # histogram group rule with a HistogramRule.start of 25, an HistogramRule.
      # interval of 20, and an HistogramRule.end of 65. +-------------+----------------
      # ---+ | Grouped Age | AVERAGE of Amount | +-------------+-------------------+ |
      # < 25 | $19.34 | | 25-45 | $31.43 | | 45-65 | $35.87 | | > 65 | $27.55 | +------
      # -------+-------------------+ | Grand Total | $29.12 | +-------------+----------
      # ---------+
      class HistogramRule
        include Google::Apis::Core::Hashable
      
        # The maximum value at which items are placed into buckets of constant size.
        # Values above end are lumped into a single bucket. This field is optional.
        # Corresponds to the JSON property `end`
        # @return [Float]
        attr_accessor :end
      
        # The size of the buckets that are created. Must be positive.
        # Corresponds to the JSON property `interval`
        # @return [Float]
        attr_accessor :interval
      
        # The minimum value at which items are placed into buckets of constant size.
        # Values below start are lumped into a single bucket. This field is optional.
        # Corresponds to the JSON property `start`
        # @return [Float]
        attr_accessor :start
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @end = args[:end] if args.key?(:end)
          @interval = args[:interval] if args.key?(:interval)
          @start = args[:start] if args.key?(:start)
        end
      end
      
      # A histogram series containing the series color and data.
      class HistogramSeries
        include Google::Apis::Core::Hashable
      
        # Represents a color in the RGBA color space. This representation is designed
        # for simplicity of conversion to/from color representations in various
        # languages over compactness; for example, the fields of this representation can
        # be trivially provided to the constructor of "java.awt.Color" in Java; it can
        # also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
        # method in iOS; and, with just a little work, it can be easily formatted into a
        # CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
        # information about the absolute color space that should be used to interpret
        # the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
        # applications SHOULD assume the sRGB color space. Note: when color equality
        # needs to be decided, implementations, unless documented otherwise, will treat
        # two colors to be equal if all their red, green, blue and alpha values each
        # differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
        # public static java.awt.Color fromProto(Color protocolor) ` float alpha =
        # protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
        # java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
        # ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
        # float) color.getRed(); float green = (float) color.getGreen(); float blue = (
        # float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
        # = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
        # .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
        # ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
        # denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
        # Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
        # protocolor red]; float green = [protocolor green]; float blue = [protocolor
        # blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
        # alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
        # colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
        # UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
        # green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
        # alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
        # blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
        # [result autorelease]; return result; ` // ... Example (JavaScript): // ...
        # var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
        # var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
        # var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
        # var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
        # rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
        # 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
        # ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
        # ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
        # hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
        # var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
        # resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
        # join(''); `; // ...
        # Corresponds to the JSON property `barColor`
        # @return [Google::Apis::SheetsV4::Color]
        attr_accessor :bar_color
      
        # A color value.
        # Corresponds to the JSON property `barColorStyle`
        # @return [Google::Apis::SheetsV4::ColorStyle]
        attr_accessor :bar_color_style
      
        # The data included in a domain or series.
        # Corresponds to the JSON property `data`
        # @return [Google::Apis::SheetsV4::ChartData]
        attr_accessor :data
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @bar_color = args[:bar_color] if args.key?(:bar_color)
          @bar_color_style = args[:bar_color_style] if args.key?(:bar_color_style)
          @data = args[:data] if args.key?(:data)
        end
      end
      
      # Inserts rows or columns in a sheet at a particular index.
      class InsertDimensionRequest
        include Google::Apis::Core::Hashable
      
        # Whether dimension properties should be extended from the dimensions before or
        # after the newly inserted dimensions. True to inherit from the dimensions
        # before (in which case the start index must be greater than 0), and false to
        # inherit from the dimensions after. For example, if row index 0 has red
        # background and row index 1 has a green background, then inserting 2 rows at
        # index 1 can inherit either the green or red background. If `inheritFromBefore`
        # is true, the two new rows will be red (because the row before the insertion
        # point was red), whereas if `inheritFromBefore` is false, the two new rows will
        # be green (because the row after the insertion point was green).
        # Corresponds to the JSON property `inheritFromBefore`
        # @return [Boolean]
        attr_accessor :inherit_from_before
        alias_method :inherit_from_before?, :inherit_from_before
      
        # A range along a single dimension on a sheet. All indexes are zero-based.
        # Indexes are half open: the start index is inclusive and the end index is
        # exclusive. Missing indexes indicate the range is unbounded on that side.
        # Corresponds to the JSON property `range`
        # @return [Google::Apis::SheetsV4::DimensionRange]
        attr_accessor :range
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @inherit_from_before = args[:inherit_from_before] if args.key?(:inherit_from_before)
          @range = args[:range] if args.key?(:range)
        end
      end
      
      # Inserts cells into a range, shifting the existing cells over or down.
      class InsertRangeRequest
        include Google::Apis::Core::Hashable
      
        # A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
        # the start index is inclusive and the end index is exclusive -- [start_index,
        # end_index). Missing indexes indicate the range is unbounded on that side. For
        # example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
        # start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
        # 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
        # start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
        # sheet_id:0` The start index must always be less than or equal to the end index.
        # If the start index equals the end index, then the range is empty. Empty
        # ranges are typically not meaningful and are usually rendered in the UI as `#
        # REF!`.
        # Corresponds to the JSON property `range`
        # @return [Google::Apis::SheetsV4::GridRange]
        attr_accessor :range
      
        # The dimension which will be shifted when inserting cells. If ROWS, existing
        # cells will be shifted down. If COLUMNS, existing cells will be shifted right.
        # Corresponds to the JSON property `shiftDimension`
        # @return [String]
        attr_accessor :shift_dimension
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @range = args[:range] if args.key?(:range)
          @shift_dimension = args[:shift_dimension] if args.key?(:shift_dimension)
        end
      end
      
      # A single interpolation point on a gradient conditional format. These pin the
      # gradient color scale according to the color, type and value chosen.
      class InterpolationPoint
        include Google::Apis::Core::Hashable
      
        # Represents a color in the RGBA color space. This representation is designed
        # for simplicity of conversion to/from color representations in various
        # languages over compactness; for example, the fields of this representation can
        # be trivially provided to the constructor of "java.awt.Color" in Java; it can
        # also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
        # method in iOS; and, with just a little work, it can be easily formatted into a
        # CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
        # information about the absolute color space that should be used to interpret
        # the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
        # applications SHOULD assume the sRGB color space. Note: when color equality
        # needs to be decided, implementations, unless documented otherwise, will treat
        # two colors to be equal if all their red, green, blue and alpha values each
        # differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
        # public static java.awt.Color fromProto(Color protocolor) ` float alpha =
        # protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
        # java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
        # ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
        # float) color.getRed(); float green = (float) color.getGreen(); float blue = (
        # float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
        # = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
        # .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
        # ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
        # denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
        # Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
        # protocolor red]; float green = [protocolor green]; float blue = [protocolor
        # blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
        # alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
        # colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
        # UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
        # green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
        # alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
        # blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
        # [result autorelease]; return result; ` // ... Example (JavaScript): // ...
        # var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
        # var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
        # var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
        # var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
        # rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
        # 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
        # ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
        # ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
        # hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
        # var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
        # resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
        # join(''); `; // ...
        # Corresponds to the JSON property `color`
        # @return [Google::Apis::SheetsV4::Color]
        attr_accessor :color
      
        # A color value.
        # Corresponds to the JSON property `colorStyle`
        # @return [Google::Apis::SheetsV4::ColorStyle]
        attr_accessor :color_style
      
        # How the value should be interpreted.
        # Corresponds to the JSON property `type`
        # @return [String]
        attr_accessor :type
      
        # The value this interpolation point uses. May be a formula. Unused if type is
        # MIN or MAX.
        # Corresponds to the JSON property `value`
        # @return [String]
        attr_accessor :value
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @color = args[:color] if args.key?(:color)
          @color_style = args[:color_style] if args.key?(:color_style)
          @type = args[:type] if args.key?(:type)
          @value = args[:value] if args.key?(:value)
        end
      end
      
      # Represents a time interval, encoded as a Timestamp start (inclusive) and a
      # Timestamp end (exclusive). The start must be less than or equal to the end.
      # When the start equals the end, the interval is empty (matches no time). When
      # both start and end are unspecified, the interval matches any time.
      class Interval
        include Google::Apis::Core::Hashable
      
        # Optional. Exclusive end of the interval. If specified, a Timestamp matching
        # this interval will have to be before the end.
        # Corresponds to the JSON property `endTime`
        # @return [String]
        attr_accessor :end_time
      
        # Optional. Inclusive start of the interval. If specified, a Timestamp matching
        # this interval will have to be the same or after the start.
        # Corresponds to the JSON property `startTime`
        # @return [String]
        attr_accessor :start_time
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @end_time = args[:end_time] if args.key?(:end_time)
          @start_time = args[:start_time] if args.key?(:start_time)
        end
      end
      
      # Settings to control how circular dependencies are resolved with iterative
      # calculation.
      class IterativeCalculationSettings
        include Google::Apis::Core::Hashable
      
        # When iterative calculation is enabled and successive results differ by less
        # than this threshold value, the calculation rounds stop.
        # Corresponds to the JSON property `convergenceThreshold`
        # @return [Float]
        attr_accessor :convergence_threshold
      
        # When iterative calculation is enabled, the maximum number of calculation
        # rounds to perform.
        # Corresponds to the JSON property `maxIterations`
        # @return [Fixnum]
        attr_accessor :max_iterations
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @convergence_threshold = args[:convergence_threshold] if args.key?(:convergence_threshold)
          @max_iterations = args[:max_iterations] if args.key?(:max_iterations)
        end
      end
      
      # Formatting options for key value.
      class KeyValueFormat
        include Google::Apis::Core::Hashable
      
        # Position settings for text.
        # Corresponds to the JSON property `position`
        # @return [Google::Apis::SheetsV4::TextPosition]
        attr_accessor :position
      
        # The format of a run of text in a cell. Absent values indicate that the field
        # isn't specified.
        # Corresponds to the JSON property `textFormat`
        # @return [Google::Apis::SheetsV4::TextFormat]
        attr_accessor :text_format
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @position = args[:position] if args.key?(:position)
          @text_format = args[:text_format] if args.key?(:text_format)
        end
      end
      
      # Properties that describe the style of a line.
      class LineStyle
        include Google::Apis::Core::Hashable
      
        # The dash type of the line.
        # Corresponds to the JSON property `type`
        # @return [String]
        attr_accessor :type
      
        # The thickness of the line, in px.
        # Corresponds to the JSON property `width`
        # @return [Fixnum]
        attr_accessor :width
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @type = args[:type] if args.key?(:type)
          @width = args[:width] if args.key?(:width)
        end
      end
      
      # Allows you to manually organize the values in a source data column into
      # buckets with names of your choosing. For example, a pivot table that
      # aggregates population by state: +-------+-------------------+ | State | SUM of
      # Population | +-------+-------------------+ | AK | 0.7 | | AL | 4.8 | | AR | 2.
      # 9 | ... +-------+-------------------+ could be turned into a pivot table that
      # aggregates population by time zone by providing a list of groups (for example,
      # groupName = 'Central', items = ['AL', 'AR', 'IA', ...]) to a manual group rule.
      # Note that a similar effect could be achieved by adding a time zone column to
      # the source data and adjusting the pivot table. +-----------+-------------------
      # + | Time Zone | SUM of Population | +-----------+-------------------+ |
      # Central | 106.3 | | Eastern | 151.9 | | Mountain | 17.4 | ... +-----------+----
      # ---------------+
      class ManualRule
        include Google::Apis::Core::Hashable
      
        # The list of group names and the corresponding items from the source data that
        # map to each group name.
        # Corresponds to the JSON property `groups`
        # @return [Array<Google::Apis::SheetsV4::ManualRuleGroup>]
        attr_accessor :groups
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @groups = args[:groups] if args.key?(:groups)
        end
      end
      
      # A group name and a list of items from the source data that should be placed in
      # the group with this name.
      class ManualRuleGroup
        include Google::Apis::Core::Hashable
      
        # The kinds of value that a cell in a spreadsheet can have.
        # Corresponds to the JSON property `groupName`
        # @return [Google::Apis::SheetsV4::ExtendedValue]
        attr_accessor :group_name
      
        # The items in the source data that should be placed into this group. Each item
        # may be a string, number, or boolean. Items may appear in at most one group
        # within a given ManualRule. Items that do not appear in any group will appear
        # on their own.
        # Corresponds to the JSON property `items`
        # @return [Array<Google::Apis::SheetsV4::ExtendedValue>]
        attr_accessor :items
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @group_name = args[:group_name] if args.key?(:group_name)
          @items = args[:items] if args.key?(:items)
        end
      end
      
      # A developer metadata entry and the data filters specified in the original
      # request that matched it.
      class MatchedDeveloperMetadata
        include Google::Apis::Core::Hashable
      
        # All filters matching the returned developer metadata.
        # Corresponds to the JSON property `dataFilters`
        # @return [Array<Google::Apis::SheetsV4::DataFilter>]
        attr_accessor :data_filters
      
        # Developer metadata associated with a location or object in a spreadsheet.
        # Developer metadata may be used to associate arbitrary data with various parts
        # of a spreadsheet and will remain associated at those locations as they move
        # around and the spreadsheet is edited. For example, if developer metadata is
        # associated with row 5 and another row is then subsequently inserted above row
        # 5, that original metadata will still be associated with the row it was first
        # associated with (what is now row 6). If the associated object is deleted its
        # metadata is deleted too.
        # Corresponds to the JSON property `developerMetadata`
        # @return [Google::Apis::SheetsV4::DeveloperMetadata]
        attr_accessor :developer_metadata
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @data_filters = args[:data_filters] if args.key?(:data_filters)
          @developer_metadata = args[:developer_metadata] if args.key?(:developer_metadata)
        end
      end
      
      # A value range that was matched by one or more data filers.
      class MatchedValueRange
        include Google::Apis::Core::Hashable
      
        # The DataFilters from the request that matched the range of values.
        # Corresponds to the JSON property `dataFilters`
        # @return [Array<Google::Apis::SheetsV4::DataFilter>]
        attr_accessor :data_filters
      
        # Data within a range of the spreadsheet.
        # Corresponds to the JSON property `valueRange`
        # @return [Google::Apis::SheetsV4::ValueRange]
        attr_accessor :value_range
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @data_filters = args[:data_filters] if args.key?(:data_filters)
          @value_range = args[:value_range] if args.key?(:value_range)
        end
      end
      
      # Merges all cells in the range.
      class MergeCellsRequest
        include Google::Apis::Core::Hashable
      
        # How the cells should be merged.
        # Corresponds to the JSON property `mergeType`
        # @return [String]
        attr_accessor :merge_type
      
        # A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
        # the start index is inclusive and the end index is exclusive -- [start_index,
        # end_index). Missing indexes indicate the range is unbounded on that side. For
        # example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
        # start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
        # 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
        # start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
        # sheet_id:0` The start index must always be less than or equal to the end index.
        # If the start index equals the end index, then the range is empty. Empty
        # ranges are typically not meaningful and are usually rendered in the UI as `#
        # REF!`.
        # Corresponds to the JSON property `range`
        # @return [Google::Apis::SheetsV4::GridRange]
        attr_accessor :range
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @merge_type = args[:merge_type] if args.key?(:merge_type)
          @range = args[:range] if args.key?(:range)
        end
      end
      
      # Moves one or more rows or columns.
      class MoveDimensionRequest
        include Google::Apis::Core::Hashable
      
        # The zero-based start index of where to move the source data to, based on the
        # coordinates *before* the source data is removed from the grid. Existing data
        # will be shifted down or right (depending on the dimension) to make room for
        # the moved dimensions. The source dimensions are removed from the grid, so the
        # the data may end up in a different index than specified. For example, given `
        # A1..A5` of `0, 1, 2, 3, 4` and wanting to move `"1"` and `"2"` to between `"3"`
        # and `"4"`, the source would be `ROWS [1..3)`,and the destination index would
        # be `"4"` (the zero-based index of row 5). The end result would be `A1..A5` of `
        # 0, 3, 1, 2, 4`.
        # Corresponds to the JSON property `destinationIndex`
        # @return [Fixnum]
        attr_accessor :destination_index
      
        # A range along a single dimension on a sheet. All indexes are zero-based.
        # Indexes are half open: the start index is inclusive and the end index is
        # exclusive. Missing indexes indicate the range is unbounded on that side.
        # Corresponds to the JSON property `source`
        # @return [Google::Apis::SheetsV4::DimensionRange]
        attr_accessor :source
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @destination_index = args[:destination_index] if args.key?(:destination_index)
          @source = args[:source] if args.key?(:source)
        end
      end
      
      # A named range.
      class NamedRange
        include Google::Apis::Core::Hashable
      
        # The name of the named range.
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # The ID of the named range.
        # Corresponds to the JSON property `namedRangeId`
        # @return [String]
        attr_accessor :named_range_id
      
        # A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
        # the start index is inclusive and the end index is exclusive -- [start_index,
        # end_index). Missing indexes indicate the range is unbounded on that side. For
        # example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
        # start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
        # 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
        # start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
        # sheet_id:0` The start index must always be less than or equal to the end index.
        # If the start index equals the end index, then the range is empty. Empty
        # ranges are typically not meaningful and are usually rendered in the UI as `#
        # REF!`.
        # Corresponds to the JSON property `range`
        # @return [Google::Apis::SheetsV4::GridRange]
        attr_accessor :range
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @name = args[:name] if args.key?(:name)
          @named_range_id = args[:named_range_id] if args.key?(:named_range_id)
          @range = args[:range] if args.key?(:range)
        end
      end
      
      # The number format of a cell.
      class NumberFormat
        include Google::Apis::Core::Hashable
      
        # Pattern string used for formatting. If not set, a default pattern based on the
        # user's locale will be used if necessary for the given type. See the [Date and
        # Number Formats guide](/sheets/api/guides/formats) for more information about
        # the supported patterns.
        # Corresponds to the JSON property `pattern`
        # @return [String]
        attr_accessor :pattern
      
        # The type of the number format. When writing, this field must be set.
        # Corresponds to the JSON property `type`
        # @return [String]
        attr_accessor :type
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @pattern = args[:pattern] if args.key?(:pattern)
          @type = args[:type] if args.key?(:type)
        end
      end
      
      # An org chart. Org charts require a unique set of labels in labels and may
      # optionally include parent_labels and tooltips. parent_labels contain, for each
      # node, the label identifying the parent node. tooltips contain, for each node,
      # an optional tooltip. For example, to describe an OrgChart with Alice as the
      # CEO, Bob as the President (reporting to Alice) and Cathy as VP of Sales (also
      # reporting to Alice), have labels contain "Alice", "Bob", "Cathy",
      # parent_labels contain "", "Alice", "Alice" and tooltips contain "CEO", "
      # President", "VP Sales".
      class OrgChartSpec
        include Google::Apis::Core::Hashable
      
        # The data included in a domain or series.
        # Corresponds to the JSON property `labels`
        # @return [Google::Apis::SheetsV4::ChartData]
        attr_accessor :labels
      
        # Represents a color in the RGBA color space. This representation is designed
        # for simplicity of conversion to/from color representations in various
        # languages over compactness; for example, the fields of this representation can
        # be trivially provided to the constructor of "java.awt.Color" in Java; it can
        # also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
        # method in iOS; and, with just a little work, it can be easily formatted into a
        # CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
        # information about the absolute color space that should be used to interpret
        # the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
        # applications SHOULD assume the sRGB color space. Note: when color equality
        # needs to be decided, implementations, unless documented otherwise, will treat
        # two colors to be equal if all their red, green, blue and alpha values each
        # differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
        # public static java.awt.Color fromProto(Color protocolor) ` float alpha =
        # protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
        # java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
        # ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
        # float) color.getRed(); float green = (float) color.getGreen(); float blue = (
        # float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
        # = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
        # .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
        # ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
        # denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
        # Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
        # protocolor red]; float green = [protocolor green]; float blue = [protocolor
        # blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
        # alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
        # colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
        # UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
        # green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
        # alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
        # blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
        # [result autorelease]; return result; ` // ... Example (JavaScript): // ...
        # var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
        # var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
        # var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
        # var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
        # rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
        # 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
        # ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
        # ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
        # hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
        # var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
        # resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
        # join(''); `; // ...
        # Corresponds to the JSON property `nodeColor`
        # @return [Google::Apis::SheetsV4::Color]
        attr_accessor :node_color
      
        # A color value.
        # Corresponds to the JSON property `nodeColorStyle`
        # @return [Google::Apis::SheetsV4::ColorStyle]
        attr_accessor :node_color_style
      
        # The size of the org chart nodes.
        # Corresponds to the JSON property `nodeSize`
        # @return [String]
        attr_accessor :node_size
      
        # The data included in a domain or series.
        # Corresponds to the JSON property `parentLabels`
        # @return [Google::Apis::SheetsV4::ChartData]
        attr_accessor :parent_labels
      
        # Represents a color in the RGBA color space. This representation is designed
        # for simplicity of conversion to/from color representations in various
        # languages over compactness; for example, the fields of this representation can
        # be trivially provided to the constructor of "java.awt.Color" in Java; it can
        # also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
        # method in iOS; and, with just a little work, it can be easily formatted into a
        # CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
        # information about the absolute color space that should be used to interpret
        # the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
        # applications SHOULD assume the sRGB color space. Note: when color equality
        # needs to be decided, implementations, unless documented otherwise, will treat
        # two colors to be equal if all their red, green, blue and alpha values each
        # differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
        # public static java.awt.Color fromProto(Color protocolor) ` float alpha =
        # protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
        # java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
        # ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
        # float) color.getRed(); float green = (float) color.getGreen(); float blue = (
        # float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
        # = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
        # .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
        # ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
        # denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
        # Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
        # protocolor red]; float green = [protocolor green]; float blue = [protocolor
        # blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
        # alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
        # colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
        # UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
        # green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
        # alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
        # blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
        # [result autorelease]; return result; ` // ... Example (JavaScript): // ...
        # var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
        # var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
        # var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
        # var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
        # rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
        # 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
        # ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
        # ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
        # hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
        # var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
        # resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
        # join(''); `; // ...
        # Corresponds to the JSON property `selectedNodeColor`
        # @return [Google::Apis::SheetsV4::Color]
        attr_accessor :selected_node_color
      
        # A color value.
        # Corresponds to the JSON property `selectedNodeColorStyle`
        # @return [Google::Apis::SheetsV4::ColorStyle]
        attr_accessor :selected_node_color_style
      
        # The data included in a domain or series.
        # Corresponds to the JSON property `tooltips`
        # @return [Google::Apis::SheetsV4::ChartData]
        attr_accessor :tooltips
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @labels = args[:labels] if args.key?(:labels)
          @node_color = args[:node_color] if args.key?(:node_color)
          @node_color_style = args[:node_color_style] if args.key?(:node_color_style)
          @node_size = args[:node_size] if args.key?(:node_size)
          @parent_labels = args[:parent_labels] if args.key?(:parent_labels)
          @selected_node_color = args[:selected_node_color] if args.key?(:selected_node_color)
          @selected_node_color_style = args[:selected_node_color_style] if args.key?(:selected_node_color_style)
          @tooltips = args[:tooltips] if args.key?(:tooltips)
        end
      end
      
      # The location an object is overlaid on top of a grid.
      class OverlayPosition
        include Google::Apis::Core::Hashable
      
        # A coordinate in a sheet. All indexes are zero-based.
        # Corresponds to the JSON property `anchorCell`
        # @return [Google::Apis::SheetsV4::GridCoordinate]
        attr_accessor :anchor_cell
      
        # The height of the object, in pixels. Defaults to 371.
        # Corresponds to the JSON property `heightPixels`
        # @return [Fixnum]
        attr_accessor :height_pixels
      
        # The horizontal offset, in pixels, that the object is offset from the anchor
        # cell.
        # Corresponds to the JSON property `offsetXPixels`
        # @return [Fixnum]
        attr_accessor :offset_x_pixels
      
        # The vertical offset, in pixels, that the object is offset from the anchor cell.
        # Corresponds to the JSON property `offsetYPixels`
        # @return [Fixnum]
        attr_accessor :offset_y_pixels
      
        # The width of the object, in pixels. Defaults to 600.
        # Corresponds to the JSON property `widthPixels`
        # @return [Fixnum]
        attr_accessor :width_pixels
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @anchor_cell = args[:anchor_cell] if args.key?(:anchor_cell)
          @height_pixels = args[:height_pixels] if args.key?(:height_pixels)
          @offset_x_pixels = args[:offset_x_pixels] if args.key?(:offset_x_pixels)
          @offset_y_pixels = args[:offset_y_pixels] if args.key?(:offset_y_pixels)
          @width_pixels = args[:width_pixels] if args.key?(:width_pixels)
        end
      end
      
      # The amount of padding around the cell, in pixels. When updating padding, every
      # field must be specified.
      class Padding
        include Google::Apis::Core::Hashable
      
        # The bottom padding of the cell.
        # Corresponds to the JSON property `bottom`
        # @return [Fixnum]
        attr_accessor :bottom
      
        # The left padding of the cell.
        # Corresponds to the JSON property `left`
        # @return [Fixnum]
        attr_accessor :left
      
        # The right padding of the cell.
        # Corresponds to the JSON property `right`
        # @return [Fixnum]
        attr_accessor :right
      
        # The top padding of the cell.
        # Corresponds to the JSON property `top`
        # @return [Fixnum]
        attr_accessor :top
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @bottom = args[:bottom] if args.key?(:bottom)
          @left = args[:left] if args.key?(:left)
          @right = args[:right] if args.key?(:right)
          @top = args[:top] if args.key?(:top)
        end
      end
      
      # Inserts data into the spreadsheet starting at the specified coordinate.
      class PasteDataRequest
        include Google::Apis::Core::Hashable
      
        # A coordinate in a sheet. All indexes are zero-based.
        # Corresponds to the JSON property `coordinate`
        # @return [Google::Apis::SheetsV4::GridCoordinate]
        attr_accessor :coordinate
      
        # The data to insert.
        # Corresponds to the JSON property `data`
        # @return [String]
        attr_accessor :data
      
        # The delimiter in the data.
        # Corresponds to the JSON property `delimiter`
        # @return [String]
        attr_accessor :delimiter
      
        # True if the data is HTML.
        # Corresponds to the JSON property `html`
        # @return [Boolean]
        attr_accessor :html
        alias_method :html?, :html
      
        # How the data should be pasted.
        # Corresponds to the JSON property `type`
        # @return [String]
        attr_accessor :type
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @coordinate = args[:coordinate] if args.key?(:coordinate)
          @data = args[:data] if args.key?(:data)
          @delimiter = args[:delimiter] if args.key?(:delimiter)
          @html = args[:html] if args.key?(:html)
          @type = args[:type] if args.key?(:type)
        end
      end
      
      # A pie chart.
      class PieChartSpec
        include Google::Apis::Core::Hashable
      
        # The data included in a domain or series.
        # Corresponds to the JSON property `domain`
        # @return [Google::Apis::SheetsV4::ChartData]
        attr_accessor :domain
      
        # Where the legend of the pie chart should be drawn.
        # Corresponds to the JSON property `legendPosition`
        # @return [String]
        attr_accessor :legend_position
      
        # The size of the hole in the pie chart.
        # Corresponds to the JSON property `pieHole`
        # @return [Float]
        attr_accessor :pie_hole
      
        # The data included in a domain or series.
        # Corresponds to the JSON property `series`
        # @return [Google::Apis::SheetsV4::ChartData]
        attr_accessor :series
      
        # True if the pie is three dimensional.
        # Corresponds to the JSON property `threeDimensional`
        # @return [Boolean]
        attr_accessor :three_dimensional
        alias_method :three_dimensional?, :three_dimensional
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @domain = args[:domain] if args.key?(:domain)
          @legend_position = args[:legend_position] if args.key?(:legend_position)
          @pie_hole = args[:pie_hole] if args.key?(:pie_hole)
          @series = args[:series] if args.key?(:series)
          @three_dimensional = args[:three_dimensional] if args.key?(:three_dimensional)
        end
      end
      
      # Criteria for showing/hiding rows in a pivot table.
      class PivotFilterCriteria
        include Google::Apis::Core::Hashable
      
        # A condition that can evaluate to true or false. BooleanConditions are used by
        # conditional formatting, data validation, and the criteria in filters.
        # Corresponds to the JSON property `condition`
        # @return [Google::Apis::SheetsV4::BooleanCondition]
        attr_accessor :condition
      
        # Whether values are visible by default. If true, the visible_values are ignored,
        # all values that meet condition (if specified) are shown. If false, values
        # that are both in visible_values and meet condition are shown.
        # Corresponds to the JSON property `visibleByDefault`
        # @return [Boolean]
        attr_accessor :visible_by_default
        alias_method :visible_by_default?, :visible_by_default
      
        # Values that should be included. Values not listed here are excluded.
        # Corresponds to the JSON property `visibleValues`
        # @return [Array<String>]
        attr_accessor :visible_values
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @condition = args[:condition] if args.key?(:condition)
          @visible_by_default = args[:visible_by_default] if args.key?(:visible_by_default)
          @visible_values = args[:visible_values] if args.key?(:visible_values)
        end
      end
      
      # The pivot table filter criteria associated with a specific source column
      # offset.
      class PivotFilterSpec
        include Google::Apis::Core::Hashable
      
        # The column offset of the source range.
        # Corresponds to the JSON property `columnOffsetIndex`
        # @return [Fixnum]
        attr_accessor :column_offset_index
      
        # An unique identifier that references a data source column.
        # Corresponds to the JSON property `dataSourceColumnReference`
        # @return [Google::Apis::SheetsV4::DataSourceColumnReference]
        attr_accessor :data_source_column_reference
      
        # Criteria for showing/hiding rows in a pivot table.
        # Corresponds to the JSON property `filterCriteria`
        # @return [Google::Apis::SheetsV4::PivotFilterCriteria]
        attr_accessor :filter_criteria
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @column_offset_index = args[:column_offset_index] if args.key?(:column_offset_index)
          @data_source_column_reference = args[:data_source_column_reference] if args.key?(:data_source_column_reference)
          @filter_criteria = args[:filter_criteria] if args.key?(:filter_criteria)
        end
      end
      
      # A single grouping (either row or column) in a pivot table.
      class PivotGroup
        include Google::Apis::Core::Hashable
      
        # An unique identifier that references a data source column.
        # Corresponds to the JSON property `dataSourceColumnReference`
        # @return [Google::Apis::SheetsV4::DataSourceColumnReference]
        attr_accessor :data_source_column_reference
      
        # The count limit on rows or columns in the pivot group.
        # Corresponds to the JSON property `groupLimit`
        # @return [Google::Apis::SheetsV4::PivotGroupLimit]
        attr_accessor :group_limit
      
        # An optional setting on a PivotGroup that defines buckets for the values in the
        # source data column rather than breaking out each individual value. Only one
        # PivotGroup with a group rule may be added for each column in the source data,
        # though on any given column you may add both a PivotGroup that has a rule and a
        # PivotGroup that does not.
        # Corresponds to the JSON property `groupRule`
        # @return [Google::Apis::SheetsV4::PivotGroupRule]
        attr_accessor :group_rule
      
        # The labels to use for the row/column groups which can be customized. For
        # example, in the following pivot table, the row label is `Region` (which could
        # be renamed to `State`) and the column label is `Product` (which could be
        # renamed `Item`). Pivot tables created before December 2017 do not have header
        # labels. If you'd like to add header labels to an existing pivot table, please
        # delete the existing pivot table and then create a new pivot table with same
        # parameters. +--------------+---------+-------+ | SUM of Units | Product | | |
        # Region | Pen | Paper | +--------------+---------+-------+ | New York | 345 |
        # 98 | | Oregon | 234 | 123 | | Tennessee | 531 | 415 | +--------------+---------
        # +-------+ | Grand Total | 1110 | 636 | +--------------+---------+-------+
        # Corresponds to the JSON property `label`
        # @return [String]
        attr_accessor :label
      
        # True if the headings in this pivot group should be repeated. This is only
        # valid for row groupings and is ignored by columns. By default, we minimize
        # repitition of headings by not showing higher level headings where they are the
        # same. For example, even though the third row below corresponds to "Q1 Mar", "
        # Q1" is not shown because it is redundant with previous rows. Setting
        # repeat_headings to true would cause "Q1" to be repeated for "Feb" and "Mar". +-
        # -------------+ | Q1 | Jan | | | Feb | | | Mar | +--------+-----+ | Q1 Total | +
        # --------------+
        # Corresponds to the JSON property `repeatHeadings`
        # @return [Boolean]
        attr_accessor :repeat_headings
        alias_method :repeat_headings?, :repeat_headings
      
        # True if the pivot table should include the totals for this grouping.
        # Corresponds to the JSON property `showTotals`
        # @return [Boolean]
        attr_accessor :show_totals
        alias_method :show_totals?, :show_totals
      
        # The order the values in this group should be sorted.
        # Corresponds to the JSON property `sortOrder`
        # @return [String]
        attr_accessor :sort_order
      
        # The column offset of the source range that this grouping is based on. For
        # example, if the source was `C10:E15`, a `sourceColumnOffset` of `0` means this
        # group refers to column `C`, whereas the offset `1` would refer to column `D`.
        # Corresponds to the JSON property `sourceColumnOffset`
        # @return [Fixnum]
        attr_accessor :source_column_offset
      
        # Information about which values in a pivot group should be used for sorting.
        # Corresponds to the JSON property `valueBucket`
        # @return [Google::Apis::SheetsV4::PivotGroupSortValueBucket]
        attr_accessor :value_bucket
      
        # Metadata about values in the grouping.
        # Corresponds to the JSON property `valueMetadata`
        # @return [Array<Google::Apis::SheetsV4::PivotGroupValueMetadata>]
        attr_accessor :value_metadata
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @data_source_column_reference = args[:data_source_column_reference] if args.key?(:data_source_column_reference)
          @group_limit = args[:group_limit] if args.key?(:group_limit)
          @group_rule = args[:group_rule] if args.key?(:group_rule)
          @label = args[:label] if args.key?(:label)
          @repeat_headings = args[:repeat_headings] if args.key?(:repeat_headings)
          @show_totals = args[:show_totals] if args.key?(:show_totals)
          @sort_order = args[:sort_order] if args.key?(:sort_order)
          @source_column_offset = args[:source_column_offset] if args.key?(:source_column_offset)
          @value_bucket = args[:value_bucket] if args.key?(:value_bucket)
          @value_metadata = args[:value_metadata] if args.key?(:value_metadata)
        end
      end
      
      # The count limit on rows or columns in the pivot group.
      class PivotGroupLimit
        include Google::Apis::Core::Hashable
      
        # The order in which the group limit is applied to the pivot table. Pivot group
        # limits are applied from lower to higher order number. Order numbers are
        # normalized to consecutive integers from 0. For write request, to fully
        # customize the applying orders, all pivot group limits should have this field
        # set with an unique number. Otherwise, the order is determined by the index in
        # the PivotTable.rows list and then the PivotTable.columns list.
        # Corresponds to the JSON property `applyOrder`
        # @return [Fixnum]
        attr_accessor :apply_order
      
        # The count limit.
        # Corresponds to the JSON property `countLimit`
        # @return [Fixnum]
        attr_accessor :count_limit
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @apply_order = args[:apply_order] if args.key?(:apply_order)
          @count_limit = args[:count_limit] if args.key?(:count_limit)
        end
      end
      
      # An optional setting on a PivotGroup that defines buckets for the values in the
      # source data column rather than breaking out each individual value. Only one
      # PivotGroup with a group rule may be added for each column in the source data,
      # though on any given column you may add both a PivotGroup that has a rule and a
      # PivotGroup that does not.
      class PivotGroupRule
        include Google::Apis::Core::Hashable
      
        # Allows you to organize the date-time values in a source data column into
        # buckets based on selected parts of their date or time values. For example,
        # consider a pivot table showing sales transactions by date: +----------+--------
        # ------+ | Date | SUM of Sales | +----------+--------------+ | 1/1/2017 | $621.
        # 14 | | 2/3/2017 | $708.84 | | 5/8/2017 | $326.84 | ... +----------+------------
        # --+ Applying a date-time group rule with a DateTimeRuleType of YEAR_MONTH
        # results in the following pivot table. +--------------+--------------+ |
        # Grouped Date | SUM of Sales | +--------------+--------------+ | 2017-Jan | $53,
        # 731.78 | | 2017-Feb | $83,475.32 | | 2017-Mar | $94,385.05 | ... +-------------
        # -+--------------+
        # Corresponds to the JSON property `dateTimeRule`
        # @return [Google::Apis::SheetsV4::DateTimeRule]
        attr_accessor :date_time_rule
      
        # Allows you to organize the numeric values in a source data column into buckets
        # of a constant size. All values from HistogramRule.start to HistogramRule.end
        # are placed into groups of size HistogramRule.interval. In addition, all values
        # below HistogramRule.start are placed in one group, and all values above
        # HistogramRule.end are placed in another. Only HistogramRule.interval is
        # required, though if HistogramRule.start and HistogramRule.end are both
        # provided, HistogramRule.start must be less than HistogramRule.end. For example,
        # a pivot table showing average purchase amount by age that has 50+ rows: +-----
        # +-------------------+ | Age | AVERAGE of Amount | +-----+-------------------+ |
        # 16 | $27.13 | | 17 | $5.24 | | 18 | $20.15 | ... +-----+-------------------+
        # could be turned into a pivot table that looks like the one below by applying a
        # histogram group rule with a HistogramRule.start of 25, an HistogramRule.
        # interval of 20, and an HistogramRule.end of 65. +-------------+----------------
        # ---+ | Grouped Age | AVERAGE of Amount | +-------------+-------------------+ |
        # < 25 | $19.34 | | 25-45 | $31.43 | | 45-65 | $35.87 | | > 65 | $27.55 | +------
        # -------+-------------------+ | Grand Total | $29.12 | +-------------+----------
        # ---------+
        # Corresponds to the JSON property `histogramRule`
        # @return [Google::Apis::SheetsV4::HistogramRule]
        attr_accessor :histogram_rule
      
        # Allows you to manually organize the values in a source data column into
        # buckets with names of your choosing. For example, a pivot table that
        # aggregates population by state: +-------+-------------------+ | State | SUM of
        # Population | +-------+-------------------+ | AK | 0.7 | | AL | 4.8 | | AR | 2.
        # 9 | ... +-------+-------------------+ could be turned into a pivot table that
        # aggregates population by time zone by providing a list of groups (for example,
        # groupName = 'Central', items = ['AL', 'AR', 'IA', ...]) to a manual group rule.
        # Note that a similar effect could be achieved by adding a time zone column to
        # the source data and adjusting the pivot table. +-----------+-------------------
        # + | Time Zone | SUM of Population | +-----------+-------------------+ |
        # Central | 106.3 | | Eastern | 151.9 | | Mountain | 17.4 | ... +-----------+----
        # ---------------+
        # Corresponds to the JSON property `manualRule`
        # @return [Google::Apis::SheetsV4::ManualRule]
        attr_accessor :manual_rule
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @date_time_rule = args[:date_time_rule] if args.key?(:date_time_rule)
          @histogram_rule = args[:histogram_rule] if args.key?(:histogram_rule)
          @manual_rule = args[:manual_rule] if args.key?(:manual_rule)
        end
      end
      
      # Information about which values in a pivot group should be used for sorting.
      class PivotGroupSortValueBucket
        include Google::Apis::Core::Hashable
      
        # Determines the bucket from which values are chosen to sort. For example, in a
        # pivot table with one row group & two column groups, the row group can list up
        # to two values. The first value corresponds to a value within the first column
        # group, and the second value corresponds to a value in the second column group.
        # If no values are listed, this would indicate that the row should be sorted
        # according to the "Grand Total" over the column groups. If a single value is
        # listed, this would correspond to using the "Total" of that bucket.
        # Corresponds to the JSON property `buckets`
        # @return [Array<Google::Apis::SheetsV4::ExtendedValue>]
        attr_accessor :buckets
      
        # The offset in the PivotTable.values list which the values in this grouping
        # should be sorted by.
        # Corresponds to the JSON property `valuesIndex`
        # @return [Fixnum]
        attr_accessor :values_index
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @buckets = args[:buckets] if args.key?(:buckets)
          @values_index = args[:values_index] if args.key?(:values_index)
        end
      end
      
      # Metadata about a value in a pivot grouping.
      class PivotGroupValueMetadata
        include Google::Apis::Core::Hashable
      
        # True if the data corresponding to the value is collapsed.
        # Corresponds to the JSON property `collapsed`
        # @return [Boolean]
        attr_accessor :collapsed
        alias_method :collapsed?, :collapsed
      
        # The kinds of value that a cell in a spreadsheet can have.
        # Corresponds to the JSON property `value`
        # @return [Google::Apis::SheetsV4::ExtendedValue]
        attr_accessor :value
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @collapsed = args[:collapsed] if args.key?(:collapsed)
          @value = args[:value] if args.key?(:value)
        end
      end
      
      # A pivot table.
      class PivotTable
        include Google::Apis::Core::Hashable
      
        # Each column grouping in the pivot table.
        # Corresponds to the JSON property `columns`
        # @return [Array<Google::Apis::SheetsV4::PivotGroup>]
        attr_accessor :columns
      
        # An optional mapping of filters per source column offset. The filters are
        # applied before aggregating data into the pivot table. The map's key is the
        # column offset of the source range that you want to filter, and the value is
        # the criteria for that column. For example, if the source was `C10:E15`, a key
        # of `0` will have the filter for column `C`, whereas the key `1` is for column `
        # D`. This field is deprecated in favor of filter_specs.
        # Corresponds to the JSON property `criteria`
        # @return [Hash<String,Google::Apis::SheetsV4::PivotFilterCriteria>]
        attr_accessor :criteria
      
        # The data execution status. A data execution is created to sync a data source
        # object with the latest data from a DataSource. It is usually scheduled to run
        # at background, you can check its state to tell if an execution completes There
        # are several scenarios where a data execution is triggered to run: * Adding a
        # data source creates an associated data source sheet as well as a data
        # execution to sync the data from the data source to the sheet. * Updating a
        # data source creates a data execution to refresh the associated data source
        # sheet similarly. * You can send refresh request to explicitly refresh one or
        # multiple data source objects.
        # Corresponds to the JSON property `dataExecutionStatus`
        # @return [Google::Apis::SheetsV4::DataExecutionStatus]
        attr_accessor :data_execution_status
      
        # The ID of the data source the pivot table is reading data from.
        # Corresponds to the JSON property `dataSourceId`
        # @return [String]
        attr_accessor :data_source_id
      
        # The filters applied to the source columns before aggregating data for the
        # pivot table. Both criteria and filter_specs are populated in responses. If
        # both fields are specified in an update request, this field takes precedence.
        # Corresponds to the JSON property `filterSpecs`
        # @return [Array<Google::Apis::SheetsV4::PivotFilterSpec>]
        attr_accessor :filter_specs
      
        # Each row grouping in the pivot table.
        # Corresponds to the JSON property `rows`
        # @return [Array<Google::Apis::SheetsV4::PivotGroup>]
        attr_accessor :rows
      
        # A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
        # the start index is inclusive and the end index is exclusive -- [start_index,
        # end_index). Missing indexes indicate the range is unbounded on that side. For
        # example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
        # start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
        # 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
        # start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
        # sheet_id:0` The start index must always be less than or equal to the end index.
        # If the start index equals the end index, then the range is empty. Empty
        # ranges are typically not meaningful and are usually rendered in the UI as `#
        # REF!`.
        # Corresponds to the JSON property `source`
        # @return [Google::Apis::SheetsV4::GridRange]
        attr_accessor :source
      
        # Whether values should be listed horizontally (as columns) or vertically (as
        # rows).
        # Corresponds to the JSON property `valueLayout`
        # @return [String]
        attr_accessor :value_layout
      
        # A list of values to include in the pivot table.
        # Corresponds to the JSON property `values`
        # @return [Array<Google::Apis::SheetsV4::PivotValue>]
        attr_accessor :values
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @columns = args[:columns] if args.key?(:columns)
          @criteria = args[:criteria] if args.key?(:criteria)
          @data_execution_status = args[:data_execution_status] if args.key?(:data_execution_status)
          @data_source_id = args[:data_source_id] if args.key?(:data_source_id)
          @filter_specs = args[:filter_specs] if args.key?(:filter_specs)
          @rows = args[:rows] if args.key?(:rows)
          @source = args[:source] if args.key?(:source)
          @value_layout = args[:value_layout] if args.key?(:value_layout)
          @values = args[:values] if args.key?(:values)
        end
      end
      
      # The definition of how a value in a pivot table should be calculated.
      class PivotValue
        include Google::Apis::Core::Hashable
      
        # If specified, indicates that pivot values should be displayed as the result of
        # a calculation with another pivot value. For example, if
        # calculated_display_type is specified as PERCENT_OF_GRAND_TOTAL, all the pivot
        # values are displayed as the percentage of the grand total. In the Sheets
        # editor, this is referred to as "Show As" in the value section of a pivot table.
        # Corresponds to the JSON property `calculatedDisplayType`
        # @return [String]
        attr_accessor :calculated_display_type
      
        # An unique identifier that references a data source column.
        # Corresponds to the JSON property `dataSourceColumnReference`
        # @return [Google::Apis::SheetsV4::DataSourceColumnReference]
        attr_accessor :data_source_column_reference
      
        # A custom formula to calculate the value. The formula must start with an `=`
        # character.
        # Corresponds to the JSON property `formula`
        # @return [String]
        attr_accessor :formula
      
        # A name to use for the value.
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # The column offset of the source range that this value reads from. For example,
        # if the source was `C10:E15`, a `sourceColumnOffset` of `0` means this value
        # refers to column `C`, whereas the offset `1` would refer to column `D`.
        # Corresponds to the JSON property `sourceColumnOffset`
        # @return [Fixnum]
        attr_accessor :source_column_offset
      
        # A function to summarize the value. If formula is set, the only supported
        # values are SUM and CUSTOM. If sourceColumnOffset is set, then `CUSTOM` is not
        # supported.
        # Corresponds to the JSON property `summarizeFunction`
        # @return [String]
        attr_accessor :summarize_function
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @calculated_display_type = args[:calculated_display_type] if args.key?(:calculated_display_type)
          @data_source_column_reference = args[:data_source_column_reference] if args.key?(:data_source_column_reference)
          @formula = args[:formula] if args.key?(:formula)
          @name = args[:name] if args.key?(:name)
          @source_column_offset = args[:source_column_offset] if args.key?(:source_column_offset)
          @summarize_function = args[:summarize_function] if args.key?(:summarize_function)
        end
      end
      
      # The style of a point on the chart.
      class PointStyle
        include Google::Apis::Core::Hashable
      
        # The point shape. If empty or unspecified, a default shape is used.
        # Corresponds to the JSON property `shape`
        # @return [String]
        attr_accessor :shape
      
        # The point size. If empty, a default size is used.
        # Corresponds to the JSON property `size`
        # @return [Float]
        attr_accessor :size
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @shape = args[:shape] if args.key?(:shape)
          @size = args[:size] if args.key?(:size)
        end
      end
      
      # A protected range.
      class ProtectedRange
        include Google::Apis::Core::Hashable
      
        # The description of this protected range.
        # Corresponds to the JSON property `description`
        # @return [String]
        attr_accessor :description
      
        # The editors of a protected range.
        # Corresponds to the JSON property `editors`
        # @return [Google::Apis::SheetsV4::Editors]
        attr_accessor :editors
      
        # The named range this protected range is backed by, if any. When writing, only
        # one of range or named_range_id may be set.
        # Corresponds to the JSON property `namedRangeId`
        # @return [String]
        attr_accessor :named_range_id
      
        # The ID of the protected range. This field is read-only.
        # Corresponds to the JSON property `protectedRangeId`
        # @return [Fixnum]
        attr_accessor :protected_range_id
      
        # A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
        # the start index is inclusive and the end index is exclusive -- [start_index,
        # end_index). Missing indexes indicate the range is unbounded on that side. For
        # example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
        # start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
        # 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
        # start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
        # sheet_id:0` The start index must always be less than or equal to the end index.
        # If the start index equals the end index, then the range is empty. Empty
        # ranges are typically not meaningful and are usually rendered in the UI as `#
        # REF!`.
        # Corresponds to the JSON property `range`
        # @return [Google::Apis::SheetsV4::GridRange]
        attr_accessor :range
      
        # True if the user who requested this protected range can edit the protected
        # area. This field is read-only.
        # Corresponds to the JSON property `requestingUserCanEdit`
        # @return [Boolean]
        attr_accessor :requesting_user_can_edit
        alias_method :requesting_user_can_edit?, :requesting_user_can_edit
      
        # The list of unprotected ranges within a protected sheet. Unprotected ranges
        # are only supported on protected sheets.
        # Corresponds to the JSON property `unprotectedRanges`
        # @return [Array<Google::Apis::SheetsV4::GridRange>]
        attr_accessor :unprotected_ranges
      
        # True if this protected range will show a warning when editing. Warning-based
        # protection means that every user can edit data in the protected range, except
        # editing will prompt a warning asking the user to confirm the edit. When
        # writing: if this field is true, then editors is ignored. Additionally, if this
        # field is changed from true to false and the `editors` field is not set (nor
        # included in the field mask), then the editors will be set to all the editors
        # in the document.
        # Corresponds to the JSON property `warningOnly`
        # @return [Boolean]
        attr_accessor :warning_only
        alias_method :warning_only?, :warning_only
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @description = args[:description] if args.key?(:description)
          @editors = args[:editors] if args.key?(:editors)
          @named_range_id = args[:named_range_id] if args.key?(:named_range_id)
          @protected_range_id = args[:protected_range_id] if args.key?(:protected_range_id)
          @range = args[:range] if args.key?(:range)
          @requesting_user_can_edit = args[:requesting_user_can_edit] if args.key?(:requesting_user_can_edit)
          @unprotected_ranges = args[:unprotected_ranges] if args.key?(:unprotected_ranges)
          @warning_only = args[:warning_only] if args.key?(:warning_only)
        end
      end
      
      # Randomizes the order of the rows in a range.
      class RandomizeRangeRequest
        include Google::Apis::Core::Hashable
      
        # A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
        # the start index is inclusive and the end index is exclusive -- [start_index,
        # end_index). Missing indexes indicate the range is unbounded on that side. For
        # example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
        # start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
        # 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
        # start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
        # sheet_id:0` The start index must always be less than or equal to the end index.
        # If the start index equals the end index, then the range is empty. Empty
        # ranges are typically not meaningful and are usually rendered in the UI as `#
        # REF!`.
        # Corresponds to the JSON property `range`
        # @return [Google::Apis::SheetsV4::GridRange]
        attr_accessor :range
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @range = args[:range] if args.key?(:range)
        end
      end
      
      # The execution status of refreshing one data source object.
      class RefreshDataSourceObjectExecutionStatus
        include Google::Apis::Core::Hashable
      
        # The data execution status. A data execution is created to sync a data source
        # object with the latest data from a DataSource. It is usually scheduled to run
        # at background, you can check its state to tell if an execution completes There
        # are several scenarios where a data execution is triggered to run: * Adding a
        # data source creates an associated data source sheet as well as a data
        # execution to sync the data from the data source to the sheet. * Updating a
        # data source creates a data execution to refresh the associated data source
        # sheet similarly. * You can send refresh request to explicitly refresh one or
        # multiple data source objects.
        # Corresponds to the JSON property `dataExecutionStatus`
        # @return [Google::Apis::SheetsV4::DataExecutionStatus]
        attr_accessor :data_execution_status
      
        # Reference to a data source object.
        # Corresponds to the JSON property `reference`
        # @return [Google::Apis::SheetsV4::DataSourceObjectReference]
        attr_accessor :reference
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @data_execution_status = args[:data_execution_status] if args.key?(:data_execution_status)
          @reference = args[:reference] if args.key?(:reference)
        end
      end
      
      # Refreshes one or multiple data source objects in the spreadsheet by the
      # specified references. The request requires an additional `bigquery.readonly`
      # OAuth scope. If there are multiple refresh requests referencing the same data
      # source objects in one batch, only the last refresh request is processed, and
      # all those requests will have the same response accordingly.
      class RefreshDataSourceRequest
        include Google::Apis::Core::Hashable
      
        # Reference to a DataSource. If specified, refreshes all associated data source
        # objects for the data source.
        # Corresponds to the JSON property `dataSourceId`
        # @return [String]
        attr_accessor :data_source_id
      
        # Refreshes the data source objects regardless of the current state. If not set
        # and a referenced data source object was in error state, the refresh will fail
        # immediately.
        # Corresponds to the JSON property `force`
        # @return [Boolean]
        attr_accessor :force
        alias_method :force?, :force
      
        # Refreshes all existing data source objects in the spreadsheet.
        # Corresponds to the JSON property `isAll`
        # @return [Boolean]
        attr_accessor :is_all
        alias_method :is_all?, :is_all
      
        # A list of references to data source objects.
        # Corresponds to the JSON property `references`
        # @return [Google::Apis::SheetsV4::DataSourceObjectReferences]
        attr_accessor :references
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @data_source_id = args[:data_source_id] if args.key?(:data_source_id)
          @force = args[:force] if args.key?(:force)
          @is_all = args[:is_all] if args.key?(:is_all)
          @references = args[:references] if args.key?(:references)
        end
      end
      
      # The response from refreshing one or multiple data source objects.
      class RefreshDataSourceResponse
        include Google::Apis::Core::Hashable
      
        # All the refresh status for the data source object references specified in the
        # request. If is_all is specified, the field contains only those in failure
        # status.
        # Corresponds to the JSON property `statuses`
        # @return [Array<Google::Apis::SheetsV4::RefreshDataSourceObjectExecutionStatus>]
        attr_accessor :statuses
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @statuses = args[:statuses] if args.key?(:statuses)
        end
      end
      
      # Updates all cells in the range to the values in the given Cell object. Only
      # the fields listed in the fields field are updated; others are unchanged. If
      # writing a cell with a formula, the formula's ranges will automatically
      # increment for each field in the range. For example, if writing a cell with
      # formula `=A1` into range B2:C4, B2 would be `=A1`, B3 would be `=A2`, B4 would
      # be `=A3`, C2 would be `=B1`, C3 would be `=B2`, C4 would be `=B3`. To keep the
      # formula's ranges static, use the `$` indicator. For example, use the formula `=
      # $A$1` to prevent both the row and the column from incrementing.
      class RepeatCellRequest
        include Google::Apis::Core::Hashable
      
        # Data about a specific cell.
        # Corresponds to the JSON property `cell`
        # @return [Google::Apis::SheetsV4::CellData]
        attr_accessor :cell
      
        # The fields that should be updated. At least one field must be specified. The
        # root `cell` is implied and should not be specified. A single `"*"` can be used
        # as short-hand for listing every field.
        # Corresponds to the JSON property `fields`
        # @return [String]
        attr_accessor :fields
      
        # A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
        # the start index is inclusive and the end index is exclusive -- [start_index,
        # end_index). Missing indexes indicate the range is unbounded on that side. For
        # example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
        # start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
        # 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
        # start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
        # sheet_id:0` The start index must always be less than or equal to the end index.
        # If the start index equals the end index, then the range is empty. Empty
        # ranges are typically not meaningful and are usually rendered in the UI as `#
        # REF!`.
        # Corresponds to the JSON property `range`
        # @return [Google::Apis::SheetsV4::GridRange]
        attr_accessor :range
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @cell = args[:cell] if args.key?(:cell)
          @fields = args[:fields] if args.key?(:fields)
          @range = args[:range] if args.key?(:range)
        end
      end
      
      # A single kind of update to apply to a spreadsheet.
      class Request
        include Google::Apis::Core::Hashable
      
        # Adds a new banded range to the spreadsheet.
        # Corresponds to the JSON property `addBanding`
        # @return [Google::Apis::SheetsV4::AddBandingRequest]
        attr_accessor :add_banding
      
        # Adds a chart to a sheet in the spreadsheet.
        # Corresponds to the JSON property `addChart`
        # @return [Google::Apis::SheetsV4::AddChartRequest]
        attr_accessor :add_chart
      
        # Adds a new conditional format rule at the given index. All subsequent rules'
        # indexes are incremented.
        # Corresponds to the JSON property `addConditionalFormatRule`
        # @return [Google::Apis::SheetsV4::AddConditionalFormatRuleRequest]
        attr_accessor :add_conditional_format_rule
      
        # Adds a data source. After the data source is added successfully, an associated
        # DATA_SOURCE sheet is created and an execution is triggered to refresh the
        # sheet to read data from the data source. The request requires an additional `
        # bigquery.readonly` OAuth scope.
        # Corresponds to the JSON property `addDataSource`
        # @return [Google::Apis::SheetsV4::AddDataSourceRequest]
        attr_accessor :add_data_source
      
        # Creates a group over the specified range. If the requested range is a superset
        # of the range of an existing group G, then the depth of G is incremented and
        # this new group G' has the depth of that group. For example, a group [C:D,
        # depth 1] + [B:E] results in groups [B:E, depth 1] and [C:D, depth 2]. If the
        # requested range is a subset of the range of an existing group G, then the
        # depth of the new group G' becomes one greater than the depth of G. For example,
        # a group [B:E, depth 1] + [C:D] results in groups [B:E, depth 1] and [C:D,
        # depth 2]. If the requested range starts before and ends within, or starts
        # within and ends after, the range of an existing group G, then the range of the
        # existing group G becomes the union of the ranges, and the new group G' has
        # depth one greater than the depth of G and range as the intersection of the
        # ranges. For example, a group [B:D, depth 1] + [C:E] results in groups [B:E,
        # depth 1] and [C:D, depth 2].
        # Corresponds to the JSON property `addDimensionGroup`
        # @return [Google::Apis::SheetsV4::AddDimensionGroupRequest]
        attr_accessor :add_dimension_group
      
        # Adds a filter view.
        # Corresponds to the JSON property `addFilterView`
        # @return [Google::Apis::SheetsV4::AddFilterViewRequest]
        attr_accessor :add_filter_view
      
        # Adds a named range to the spreadsheet.
        # Corresponds to the JSON property `addNamedRange`
        # @return [Google::Apis::SheetsV4::AddNamedRangeRequest]
        attr_accessor :add_named_range
      
        # Adds a new protected range.
        # Corresponds to the JSON property `addProtectedRange`
        # @return [Google::Apis::SheetsV4::AddProtectedRangeRequest]
        attr_accessor :add_protected_range
      
        # Adds a new sheet. When a sheet is added at a given index, all subsequent
        # sheets' indexes are incremented. To add an object sheet, use AddChartRequest
        # instead and specify EmbeddedObjectPosition.sheetId or EmbeddedObjectPosition.
        # newSheet.
        # Corresponds to the JSON property `addSheet`
        # @return [Google::Apis::SheetsV4::AddSheetRequest]
        attr_accessor :add_sheet
      
        # Adds a slicer to a sheet in the spreadsheet.
        # Corresponds to the JSON property `addSlicer`
        # @return [Google::Apis::SheetsV4::AddSlicerRequest]
        attr_accessor :add_slicer
      
        # Adds new cells after the last row with data in a sheet, inserting new rows
        # into the sheet if necessary.
        # Corresponds to the JSON property `appendCells`
        # @return [Google::Apis::SheetsV4::AppendCellsRequest]
        attr_accessor :append_cells
      
        # Appends rows or columns to the end of a sheet.
        # Corresponds to the JSON property `appendDimension`
        # @return [Google::Apis::SheetsV4::AppendDimensionRequest]
        attr_accessor :append_dimension
      
        # Fills in more data based on existing data.
        # Corresponds to the JSON property `autoFill`
        # @return [Google::Apis::SheetsV4::AutoFillRequest]
        attr_accessor :auto_fill
      
        # Automatically resizes one or more dimensions based on the contents of the
        # cells in that dimension.
        # Corresponds to the JSON property `autoResizeDimensions`
        # @return [Google::Apis::SheetsV4::AutoResizeDimensionsRequest]
        attr_accessor :auto_resize_dimensions
      
        # Clears the basic filter, if any exists on the sheet.
        # Corresponds to the JSON property `clearBasicFilter`
        # @return [Google::Apis::SheetsV4::ClearBasicFilterRequest]
        attr_accessor :clear_basic_filter
      
        # Copies data from the source to the destination.
        # Corresponds to the JSON property `copyPaste`
        # @return [Google::Apis::SheetsV4::CopyPasteRequest]
        attr_accessor :copy_paste
      
        # A request to create developer metadata.
        # Corresponds to the JSON property `createDeveloperMetadata`
        # @return [Google::Apis::SheetsV4::CreateDeveloperMetadataRequest]
        attr_accessor :create_developer_metadata
      
        # Moves data from the source to the destination.
        # Corresponds to the JSON property `cutPaste`
        # @return [Google::Apis::SheetsV4::CutPasteRequest]
        attr_accessor :cut_paste
      
        # Removes the banded range with the given ID from the spreadsheet.
        # Corresponds to the JSON property `deleteBanding`
        # @return [Google::Apis::SheetsV4::DeleteBandingRequest]
        attr_accessor :delete_banding
      
        # Deletes a conditional format rule at the given index. All subsequent rules'
        # indexes are decremented.
        # Corresponds to the JSON property `deleteConditionalFormatRule`
        # @return [Google::Apis::SheetsV4::DeleteConditionalFormatRuleRequest]
        attr_accessor :delete_conditional_format_rule
      
        # Deletes a data source. The request also deletes the associated data source
        # sheet, and unlinks all associated data source objects.
        # Corresponds to the JSON property `deleteDataSource`
        # @return [Google::Apis::SheetsV4::DeleteDataSourceRequest]
        attr_accessor :delete_data_source
      
        # A request to delete developer metadata.
        # Corresponds to the JSON property `deleteDeveloperMetadata`
        # @return [Google::Apis::SheetsV4::DeleteDeveloperMetadataRequest]
        attr_accessor :delete_developer_metadata
      
        # Deletes the dimensions from the sheet.
        # Corresponds to the JSON property `deleteDimension`
        # @return [Google::Apis::SheetsV4::DeleteDimensionRequest]
        attr_accessor :delete_dimension
      
        # Deletes a group over the specified range by decrementing the depth of the
        # dimensions in the range. For example, assume the sheet has a depth-1 group
        # over B:E and a depth-2 group over C:D. Deleting a group over D:E leaves the
        # sheet with a depth-1 group over B:D and a depth-2 group over C:C.
        # Corresponds to the JSON property `deleteDimensionGroup`
        # @return [Google::Apis::SheetsV4::DeleteDimensionGroupRequest]
        attr_accessor :delete_dimension_group
      
        # Removes rows within this range that contain values in the specified columns
        # that are duplicates of values in any previous row. Rows with identical values
        # but different letter cases, formatting, or formulas are considered to be
        # duplicates. This request also removes duplicate rows hidden from view (for
        # example, due to a filter). When removing duplicates, the first instance of
        # each duplicate row scanning from the top downwards is kept in the resulting
        # range. Content outside of the specified range isn't removed, and rows
        # considered duplicates do not have to be adjacent to each other in the range.
        # Corresponds to the JSON property `deleteDuplicates`
        # @return [Google::Apis::SheetsV4::DeleteDuplicatesRequest]
        attr_accessor :delete_duplicates
      
        # Deletes the embedded object with the given ID.
        # Corresponds to the JSON property `deleteEmbeddedObject`
        # @return [Google::Apis::SheetsV4::DeleteEmbeddedObjectRequest]
        attr_accessor :delete_embedded_object
      
        # Deletes a particular filter view.
        # Corresponds to the JSON property `deleteFilterView`
        # @return [Google::Apis::SheetsV4::DeleteFilterViewRequest]
        attr_accessor :delete_filter_view
      
        # Removes the named range with the given ID from the spreadsheet.
        # Corresponds to the JSON property `deleteNamedRange`
        # @return [Google::Apis::SheetsV4::DeleteNamedRangeRequest]
        attr_accessor :delete_named_range
      
        # Deletes the protected range with the given ID.
        # Corresponds to the JSON property `deleteProtectedRange`
        # @return [Google::Apis::SheetsV4::DeleteProtectedRangeRequest]
        attr_accessor :delete_protected_range
      
        # Deletes a range of cells, shifting other cells into the deleted area.
        # Corresponds to the JSON property `deleteRange`
        # @return [Google::Apis::SheetsV4::DeleteRangeRequest]
        attr_accessor :delete_range
      
        # Deletes the requested sheet.
        # Corresponds to the JSON property `deleteSheet`
        # @return [Google::Apis::SheetsV4::DeleteSheetRequest]
        attr_accessor :delete_sheet
      
        # Duplicates a particular filter view.
        # Corresponds to the JSON property `duplicateFilterView`
        # @return [Google::Apis::SheetsV4::DuplicateFilterViewRequest]
        attr_accessor :duplicate_filter_view
      
        # Duplicates the contents of a sheet.
        # Corresponds to the JSON property `duplicateSheet`
        # @return [Google::Apis::SheetsV4::DuplicateSheetRequest]
        attr_accessor :duplicate_sheet
      
        # Finds and replaces data in cells over a range, sheet, or all sheets.
        # Corresponds to the JSON property `findReplace`
        # @return [Google::Apis::SheetsV4::FindReplaceRequest]
        attr_accessor :find_replace
      
        # Inserts rows or columns in a sheet at a particular index.
        # Corresponds to the JSON property `insertDimension`
        # @return [Google::Apis::SheetsV4::InsertDimensionRequest]
        attr_accessor :insert_dimension
      
        # Inserts cells into a range, shifting the existing cells over or down.
        # Corresponds to the JSON property `insertRange`
        # @return [Google::Apis::SheetsV4::InsertRangeRequest]
        attr_accessor :insert_range
      
        # Merges all cells in the range.
        # Corresponds to the JSON property `mergeCells`
        # @return [Google::Apis::SheetsV4::MergeCellsRequest]
        attr_accessor :merge_cells
      
        # Moves one or more rows or columns.
        # Corresponds to the JSON property `moveDimension`
        # @return [Google::Apis::SheetsV4::MoveDimensionRequest]
        attr_accessor :move_dimension
      
        # Inserts data into the spreadsheet starting at the specified coordinate.
        # Corresponds to the JSON property `pasteData`
        # @return [Google::Apis::SheetsV4::PasteDataRequest]
        attr_accessor :paste_data
      
        # Randomizes the order of the rows in a range.
        # Corresponds to the JSON property `randomizeRange`
        # @return [Google::Apis::SheetsV4::RandomizeRangeRequest]
        attr_accessor :randomize_range
      
        # Refreshes one or multiple data source objects in the spreadsheet by the
        # specified references. The request requires an additional `bigquery.readonly`
        # OAuth scope. If there are multiple refresh requests referencing the same data
        # source objects in one batch, only the last refresh request is processed, and
        # all those requests will have the same response accordingly.
        # Corresponds to the JSON property `refreshDataSource`
        # @return [Google::Apis::SheetsV4::RefreshDataSourceRequest]
        attr_accessor :refresh_data_source
      
        # Updates all cells in the range to the values in the given Cell object. Only
        # the fields listed in the fields field are updated; others are unchanged. If
        # writing a cell with a formula, the formula's ranges will automatically
        # increment for each field in the range. For example, if writing a cell with
        # formula `=A1` into range B2:C4, B2 would be `=A1`, B3 would be `=A2`, B4 would
        # be `=A3`, C2 would be `=B1`, C3 would be `=B2`, C4 would be `=B3`. To keep the
        # formula's ranges static, use the `$` indicator. For example, use the formula `=
        # $A$1` to prevent both the row and the column from incrementing.
        # Corresponds to the JSON property `repeatCell`
        # @return [Google::Apis::SheetsV4::RepeatCellRequest]
        attr_accessor :repeat_cell
      
        # Sets the basic filter associated with a sheet.
        # Corresponds to the JSON property `setBasicFilter`
        # @return [Google::Apis::SheetsV4::SetBasicFilterRequest]
        attr_accessor :set_basic_filter
      
        # Sets a data validation rule to every cell in the range. To clear validation in
        # a range, call this with no rule specified.
        # Corresponds to the JSON property `setDataValidation`
        # @return [Google::Apis::SheetsV4::SetDataValidationRequest]
        attr_accessor :set_data_validation
      
        # Sorts data in rows based on a sort order per column.
        # Corresponds to the JSON property `sortRange`
        # @return [Google::Apis::SheetsV4::SortRangeRequest]
        attr_accessor :sort_range
      
        # Splits a column of text into multiple columns, based on a delimiter in each
        # cell.
        # Corresponds to the JSON property `textToColumns`
        # @return [Google::Apis::SheetsV4::TextToColumnsRequest]
        attr_accessor :text_to_columns
      
        # Trims the whitespace (such as spaces, tabs, or new lines) in every cell in the
        # specified range. This request removes all whitespace from the start and end of
        # each cell's text, and reduces any subsequence of remaining whitespace
        # characters to a single space. If the resulting trimmed text starts with a '+'
        # or '=' character, the text remains as a string value and isn't interpreted as
        # a formula.
        # Corresponds to the JSON property `trimWhitespace`
        # @return [Google::Apis::SheetsV4::TrimWhitespaceRequest]
        attr_accessor :trim_whitespace
      
        # Unmerges cells in the given range.
        # Corresponds to the JSON property `unmergeCells`
        # @return [Google::Apis::SheetsV4::UnmergeCellsRequest]
        attr_accessor :unmerge_cells
      
        # Updates properties of the supplied banded range.
        # Corresponds to the JSON property `updateBanding`
        # @return [Google::Apis::SheetsV4::UpdateBandingRequest]
        attr_accessor :update_banding
      
        # Updates the borders of a range. If a field is not set in the request, that
        # means the border remains as-is. For example, with two subsequent
        # UpdateBordersRequest: 1. range: A1:A5 `` top: RED, bottom: WHITE `` 2. range:
        # A1:A5 `` left: BLUE `` That would result in A1:A5 having a borders of `` top:
        # RED, bottom: WHITE, left: BLUE ``. If you want to clear a border, explicitly
        # set the style to NONE.
        # Corresponds to the JSON property `updateBorders`
        # @return [Google::Apis::SheetsV4::UpdateBordersRequest]
        attr_accessor :update_borders
      
        # Updates all cells in a range with new data.
        # Corresponds to the JSON property `updateCells`
        # @return [Google::Apis::SheetsV4::UpdateCellsRequest]
        attr_accessor :update_cells
      
        # Updates a chart's specifications. (This does not move or resize a chart. To
        # move or resize a chart, use UpdateEmbeddedObjectPositionRequest.)
        # Corresponds to the JSON property `updateChartSpec`
        # @return [Google::Apis::SheetsV4::UpdateChartSpecRequest]
        attr_accessor :update_chart_spec
      
        # Updates a conditional format rule at the given index, or moves a conditional
        # format rule to another index.
        # Corresponds to the JSON property `updateConditionalFormatRule`
        # @return [Google::Apis::SheetsV4::UpdateConditionalFormatRuleRequest]
        attr_accessor :update_conditional_format_rule
      
        # Updates a data source. After the data source is updated successfully, an
        # execution is triggered to refresh the associated DATA_SOURCE sheet to read
        # data from the updated data source. The request requires an additional `
        # bigquery.readonly` OAuth scope.
        # Corresponds to the JSON property `updateDataSource`
        # @return [Google::Apis::SheetsV4::UpdateDataSourceRequest]
        attr_accessor :update_data_source
      
        # A request to update properties of developer metadata. Updates the properties
        # of the developer metadata selected by the filters to the values provided in
        # the DeveloperMetadata resource. Callers must specify the properties they wish
        # to update in the fields parameter, as well as specify at least one DataFilter
        # matching the metadata they wish to update.
        # Corresponds to the JSON property `updateDeveloperMetadata`
        # @return [Google::Apis::SheetsV4::UpdateDeveloperMetadataRequest]
        attr_accessor :update_developer_metadata
      
        # Updates the state of the specified group.
        # Corresponds to the JSON property `updateDimensionGroup`
        # @return [Google::Apis::SheetsV4::UpdateDimensionGroupRequest]
        attr_accessor :update_dimension_group
      
        # Updates properties of dimensions within the specified range.
        # Corresponds to the JSON property `updateDimensionProperties`
        # @return [Google::Apis::SheetsV4::UpdateDimensionPropertiesRequest]
        attr_accessor :update_dimension_properties
      
        # Updates an embedded object's border property.
        # Corresponds to the JSON property `updateEmbeddedObjectBorder`
        # @return [Google::Apis::SheetsV4::UpdateEmbeddedObjectBorderRequest]
        attr_accessor :update_embedded_object_border
      
        # Update an embedded object's position (such as a moving or resizing a chart or
        # image).
        # Corresponds to the JSON property `updateEmbeddedObjectPosition`
        # @return [Google::Apis::SheetsV4::UpdateEmbeddedObjectPositionRequest]
        attr_accessor :update_embedded_object_position
      
        # Updates properties of the filter view.
        # Corresponds to the JSON property `updateFilterView`
        # @return [Google::Apis::SheetsV4::UpdateFilterViewRequest]
        attr_accessor :update_filter_view
      
        # Updates properties of the named range with the specified namedRangeId.
        # Corresponds to the JSON property `updateNamedRange`
        # @return [Google::Apis::SheetsV4::UpdateNamedRangeRequest]
        attr_accessor :update_named_range
      
        # Updates an existing protected range with the specified protectedRangeId.
        # Corresponds to the JSON property `updateProtectedRange`
        # @return [Google::Apis::SheetsV4::UpdateProtectedRangeRequest]
        attr_accessor :update_protected_range
      
        # Updates properties of the sheet with the specified sheetId.
        # Corresponds to the JSON property `updateSheetProperties`
        # @return [Google::Apis::SheetsV4::UpdateSheetPropertiesRequest]
        attr_accessor :update_sheet_properties
      
        # Updates a slicer's specifications. (This does not move or resize a slicer. To
        # move or resize a slicer use UpdateEmbeddedObjectPositionRequest.
        # Corresponds to the JSON property `updateSlicerSpec`
        # @return [Google::Apis::SheetsV4::UpdateSlicerSpecRequest]
        attr_accessor :update_slicer_spec
      
        # Updates properties of a spreadsheet.
        # Corresponds to the JSON property `updateSpreadsheetProperties`
        # @return [Google::Apis::SheetsV4::UpdateSpreadsheetPropertiesRequest]
        attr_accessor :update_spreadsheet_properties
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @add_banding = args[:add_banding] if args.key?(:add_banding)
          @add_chart = args[:add_chart] if args.key?(:add_chart)
          @add_conditional_format_rule = args[:add_conditional_format_rule] if args.key?(:add_conditional_format_rule)
          @add_data_source = args[:add_data_source] if args.key?(:add_data_source)
          @add_dimension_group = args[:add_dimension_group] if args.key?(:add_dimension_group)
          @add_filter_view = args[:add_filter_view] if args.key?(:add_filter_view)
          @add_named_range = args[:add_named_range] if args.key?(:add_named_range)
          @add_protected_range = args[:add_protected_range] if args.key?(:add_protected_range)
          @add_sheet = args[:add_sheet] if args.key?(:add_sheet)
          @add_slicer = args[:add_slicer] if args.key?(:add_slicer)
          @append_cells = args[:append_cells] if args.key?(:append_cells)
          @append_dimension = args[:append_dimension] if args.key?(:append_dimension)
          @auto_fill = args[:auto_fill] if args.key?(:auto_fill)
          @auto_resize_dimensions = args[:auto_resize_dimensions] if args.key?(:auto_resize_dimensions)
          @clear_basic_filter = args[:clear_basic_filter] if args.key?(:clear_basic_filter)
          @copy_paste = args[:copy_paste] if args.key?(:copy_paste)
          @create_developer_metadata = args[:create_developer_metadata] if args.key?(:create_developer_metadata)
          @cut_paste = args[:cut_paste] if args.key?(:cut_paste)
          @delete_banding = args[:delete_banding] if args.key?(:delete_banding)
          @delete_conditional_format_rule = args[:delete_conditional_format_rule] if args.key?(:delete_conditional_format_rule)
          @delete_data_source = args[:delete_data_source] if args.key?(:delete_data_source)
          @delete_developer_metadata = args[:delete_developer_metadata] if args.key?(:delete_developer_metadata)
          @delete_dimension = args[:delete_dimension] if args.key?(:delete_dimension)
          @delete_dimension_group = args[:delete_dimension_group] if args.key?(:delete_dimension_group)
          @delete_duplicates = args[:delete_duplicates] if args.key?(:delete_duplicates)
          @delete_embedded_object = args[:delete_embedded_object] if args.key?(:delete_embedded_object)
          @delete_filter_view = args[:delete_filter_view] if args.key?(:delete_filter_view)
          @delete_named_range = args[:delete_named_range] if args.key?(:delete_named_range)
          @delete_protected_range = args[:delete_protected_range] if args.key?(:delete_protected_range)
          @delete_range = args[:delete_range] if args.key?(:delete_range)
          @delete_sheet = args[:delete_sheet] if args.key?(:delete_sheet)
          @duplicate_filter_view = args[:duplicate_filter_view] if args.key?(:duplicate_filter_view)
          @duplicate_sheet = args[:duplicate_sheet] if args.key?(:duplicate_sheet)
          @find_replace = args[:find_replace] if args.key?(:find_replace)
          @insert_dimension = args[:insert_dimension] if args.key?(:insert_dimension)
          @insert_range = args[:insert_range] if args.key?(:insert_range)
          @merge_cells = args[:merge_cells] if args.key?(:merge_cells)
          @move_dimension = args[:move_dimension] if args.key?(:move_dimension)
          @paste_data = args[:paste_data] if args.key?(:paste_data)
          @randomize_range = args[:randomize_range] if args.key?(:randomize_range)
          @refresh_data_source = args[:refresh_data_source] if args.key?(:refresh_data_source)
          @repeat_cell = args[:repeat_cell] if args.key?(:repeat_cell)
          @set_basic_filter = args[:set_basic_filter] if args.key?(:set_basic_filter)
          @set_data_validation = args[:set_data_validation] if args.key?(:set_data_validation)
          @sort_range = args[:sort_range] if args.key?(:sort_range)
          @text_to_columns = args[:text_to_columns] if args.key?(:text_to_columns)
          @trim_whitespace = args[:trim_whitespace] if args.key?(:trim_whitespace)
          @unmerge_cells = args[:unmerge_cells] if args.key?(:unmerge_cells)
          @update_banding = args[:update_banding] if args.key?(:update_banding)
          @update_borders = args[:update_borders] if args.key?(:update_borders)
          @update_cells = args[:update_cells] if args.key?(:update_cells)
          @update_chart_spec = args[:update_chart_spec] if args.key?(:update_chart_spec)
          @update_conditional_format_rule = args[:update_conditional_format_rule] if args.key?(:update_conditional_format_rule)
          @update_data_source = args[:update_data_source] if args.key?(:update_data_source)
          @update_developer_metadata = args[:update_developer_metadata] if args.key?(:update_developer_metadata)
          @update_dimension_group = args[:update_dimension_group] if args.key?(:update_dimension_group)
          @update_dimension_properties = args[:update_dimension_properties] if args.key?(:update_dimension_properties)
          @update_embedded_object_border = args[:update_embedded_object_border] if args.key?(:update_embedded_object_border)
          @update_embedded_object_position = args[:update_embedded_object_position] if args.key?(:update_embedded_object_position)
          @update_filter_view = args[:update_filter_view] if args.key?(:update_filter_view)
          @update_named_range = args[:update_named_range] if args.key?(:update_named_range)
          @update_protected_range = args[:update_protected_range] if args.key?(:update_protected_range)
          @update_sheet_properties = args[:update_sheet_properties] if args.key?(:update_sheet_properties)
          @update_slicer_spec = args[:update_slicer_spec] if args.key?(:update_slicer_spec)
          @update_spreadsheet_properties = args[:update_spreadsheet_properties] if args.key?(:update_spreadsheet_properties)
        end
      end
      
      # A single response from an update.
      class Response
        include Google::Apis::Core::Hashable
      
        # The result of adding a banded range.
        # Corresponds to the JSON property `addBanding`
        # @return [Google::Apis::SheetsV4::AddBandingResponse]
        attr_accessor :add_banding
      
        # The result of adding a chart to a spreadsheet.
        # Corresponds to the JSON property `addChart`
        # @return [Google::Apis::SheetsV4::AddChartResponse]
        attr_accessor :add_chart
      
        # The result of adding a data source.
        # Corresponds to the JSON property `addDataSource`
        # @return [Google::Apis::SheetsV4::AddDataSourceResponse]
        attr_accessor :add_data_source
      
        # The result of adding a group.
        # Corresponds to the JSON property `addDimensionGroup`
        # @return [Google::Apis::SheetsV4::AddDimensionGroupResponse]
        attr_accessor :add_dimension_group
      
        # The result of adding a filter view.
        # Corresponds to the JSON property `addFilterView`
        # @return [Google::Apis::SheetsV4::AddFilterViewResponse]
        attr_accessor :add_filter_view
      
        # The result of adding a named range.
        # Corresponds to the JSON property `addNamedRange`
        # @return [Google::Apis::SheetsV4::AddNamedRangeResponse]
        attr_accessor :add_named_range
      
        # The result of adding a new protected range.
        # Corresponds to the JSON property `addProtectedRange`
        # @return [Google::Apis::SheetsV4::AddProtectedRangeResponse]
        attr_accessor :add_protected_range
      
        # The result of adding a sheet.
        # Corresponds to the JSON property `addSheet`
        # @return [Google::Apis::SheetsV4::AddSheetResponse]
        attr_accessor :add_sheet
      
        # The result of adding a slicer to a spreadsheet.
        # Corresponds to the JSON property `addSlicer`
        # @return [Google::Apis::SheetsV4::AddSlicerResponse]
        attr_accessor :add_slicer
      
        # The response from creating developer metadata.
        # Corresponds to the JSON property `createDeveloperMetadata`
        # @return [Google::Apis::SheetsV4::CreateDeveloperMetadataResponse]
        attr_accessor :create_developer_metadata
      
        # The result of deleting a conditional format rule.
        # Corresponds to the JSON property `deleteConditionalFormatRule`
        # @return [Google::Apis::SheetsV4::DeleteConditionalFormatRuleResponse]
        attr_accessor :delete_conditional_format_rule
      
        # The response from deleting developer metadata.
        # Corresponds to the JSON property `deleteDeveloperMetadata`
        # @return [Google::Apis::SheetsV4::DeleteDeveloperMetadataResponse]
        attr_accessor :delete_developer_metadata
      
        # The result of deleting a group.
        # Corresponds to the JSON property `deleteDimensionGroup`
        # @return [Google::Apis::SheetsV4::DeleteDimensionGroupResponse]
        attr_accessor :delete_dimension_group
      
        # The result of removing duplicates in a range.
        # Corresponds to the JSON property `deleteDuplicates`
        # @return [Google::Apis::SheetsV4::DeleteDuplicatesResponse]
        attr_accessor :delete_duplicates
      
        # The result of a filter view being duplicated.
        # Corresponds to the JSON property `duplicateFilterView`
        # @return [Google::Apis::SheetsV4::DuplicateFilterViewResponse]
        attr_accessor :duplicate_filter_view
      
        # The result of duplicating a sheet.
        # Corresponds to the JSON property `duplicateSheet`
        # @return [Google::Apis::SheetsV4::DuplicateSheetResponse]
        attr_accessor :duplicate_sheet
      
        # The result of the find/replace.
        # Corresponds to the JSON property `findReplace`
        # @return [Google::Apis::SheetsV4::FindReplaceResponse]
        attr_accessor :find_replace
      
        # The response from refreshing one or multiple data source objects.
        # Corresponds to the JSON property `refreshDataSource`
        # @return [Google::Apis::SheetsV4::RefreshDataSourceResponse]
        attr_accessor :refresh_data_source
      
        # The result of trimming whitespace in cells.
        # Corresponds to the JSON property `trimWhitespace`
        # @return [Google::Apis::SheetsV4::TrimWhitespaceResponse]
        attr_accessor :trim_whitespace
      
        # The result of updating a conditional format rule.
        # Corresponds to the JSON property `updateConditionalFormatRule`
        # @return [Google::Apis::SheetsV4::UpdateConditionalFormatRuleResponse]
        attr_accessor :update_conditional_format_rule
      
        # The response from updating data source.
        # Corresponds to the JSON property `updateDataSource`
        # @return [Google::Apis::SheetsV4::UpdateDataSourceResponse]
        attr_accessor :update_data_source
      
        # The response from updating developer metadata.
        # Corresponds to the JSON property `updateDeveloperMetadata`
        # @return [Google::Apis::SheetsV4::UpdateDeveloperMetadataResponse]
        attr_accessor :update_developer_metadata
      
        # The result of updating an embedded object's position.
        # Corresponds to the JSON property `updateEmbeddedObjectPosition`
        # @return [Google::Apis::SheetsV4::UpdateEmbeddedObjectPositionResponse]
        attr_accessor :update_embedded_object_position
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @add_banding = args[:add_banding] if args.key?(:add_banding)
          @add_chart = args[:add_chart] if args.key?(:add_chart)
          @add_data_source = args[:add_data_source] if args.key?(:add_data_source)
          @add_dimension_group = args[:add_dimension_group] if args.key?(:add_dimension_group)
          @add_filter_view = args[:add_filter_view] if args.key?(:add_filter_view)
          @add_named_range = args[:add_named_range] if args.key?(:add_named_range)
          @add_protected_range = args[:add_protected_range] if args.key?(:add_protected_range)
          @add_sheet = args[:add_sheet] if args.key?(:add_sheet)
          @add_slicer = args[:add_slicer] if args.key?(:add_slicer)
          @create_developer_metadata = args[:create_developer_metadata] if args.key?(:create_developer_metadata)
          @delete_conditional_format_rule = args[:delete_conditional_format_rule] if args.key?(:delete_conditional_format_rule)
          @delete_developer_metadata = args[:delete_developer_metadata] if args.key?(:delete_developer_metadata)
          @delete_dimension_group = args[:delete_dimension_group] if args.key?(:delete_dimension_group)
          @delete_duplicates = args[:delete_duplicates] if args.key?(:delete_duplicates)
          @duplicate_filter_view = args[:duplicate_filter_view] if args.key?(:duplicate_filter_view)
          @duplicate_sheet = args[:duplicate_sheet] if args.key?(:duplicate_sheet)
          @find_replace = args[:find_replace] if args.key?(:find_replace)
          @refresh_data_source = args[:refresh_data_source] if args.key?(:refresh_data_source)
          @trim_whitespace = args[:trim_whitespace] if args.key?(:trim_whitespace)
          @update_conditional_format_rule = args[:update_conditional_format_rule] if args.key?(:update_conditional_format_rule)
          @update_data_source = args[:update_data_source] if args.key?(:update_data_source)
          @update_developer_metadata = args[:update_developer_metadata] if args.key?(:update_developer_metadata)
          @update_embedded_object_position = args[:update_embedded_object_position] if args.key?(:update_embedded_object_position)
        end
      end
      
      # Data about each cell in a row.
      class RowData
        include Google::Apis::Core::Hashable
      
        # The values in the row, one per column.
        # Corresponds to the JSON property `values`
        # @return [Array<Google::Apis::SheetsV4::CellData>]
        attr_accessor :values
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @values = args[:values] if args.key?(:values)
        end
      end
      
      # A scorecard chart. Scorecard charts are used to highlight key performance
      # indicators, known as KPIs, on the spreadsheet. A scorecard chart can represent
      # things like total sales, average cost, or a top selling item. You can specify
      # a single data value, or aggregate over a range of data. Percentage or absolute
      # difference from a baseline value can be highlighted, like changes over time.
      class ScorecardChartSpec
        include Google::Apis::Core::Hashable
      
        # The aggregation type for key and baseline chart data in scorecard chart. This
        # field is not supported for data source charts. Use the ChartData.aggregateType
        # field of the key_value_data or baseline_value_data instead for data source
        # charts. This field is optional.
        # Corresponds to the JSON property `aggregateType`
        # @return [String]
        attr_accessor :aggregate_type
      
        # The data included in a domain or series.
        # Corresponds to the JSON property `baselineValueData`
        # @return [Google::Apis::SheetsV4::ChartData]
        attr_accessor :baseline_value_data
      
        # Formatting options for baseline value.
        # Corresponds to the JSON property `baselineValueFormat`
        # @return [Google::Apis::SheetsV4::BaselineValueFormat]
        attr_accessor :baseline_value_format
      
        # Custom number formatting options for chart attributes.
        # Corresponds to the JSON property `customFormatOptions`
        # @return [Google::Apis::SheetsV4::ChartCustomNumberFormatOptions]
        attr_accessor :custom_format_options
      
        # The data included in a domain or series.
        # Corresponds to the JSON property `keyValueData`
        # @return [Google::Apis::SheetsV4::ChartData]
        attr_accessor :key_value_data
      
        # Formatting options for key value.
        # Corresponds to the JSON property `keyValueFormat`
        # @return [Google::Apis::SheetsV4::KeyValueFormat]
        attr_accessor :key_value_format
      
        # The number format source used in the scorecard chart. This field is optional.
        # Corresponds to the JSON property `numberFormatSource`
        # @return [String]
        attr_accessor :number_format_source
      
        # Value to scale scorecard key and baseline value. For example, a factor of 10
        # can be used to divide all values in the chart by 10. This field is optional.
        # Corresponds to the JSON property `scaleFactor`
        # @return [Float]
        attr_accessor :scale_factor
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @aggregate_type = args[:aggregate_type] if args.key?(:aggregate_type)
          @baseline_value_data = args[:baseline_value_data] if args.key?(:baseline_value_data)
          @baseline_value_format = args[:baseline_value_format] if args.key?(:baseline_value_format)
          @custom_format_options = args[:custom_format_options] if args.key?(:custom_format_options)
          @key_value_data = args[:key_value_data] if args.key?(:key_value_data)
          @key_value_format = args[:key_value_format] if args.key?(:key_value_format)
          @number_format_source = args[:number_format_source] if args.key?(:number_format_source)
          @scale_factor = args[:scale_factor] if args.key?(:scale_factor)
        end
      end
      
      # A request to retrieve all developer metadata matching the set of specified
      # criteria.
      class SearchDeveloperMetadataRequest
        include Google::Apis::Core::Hashable
      
        # The data filters describing the criteria used to determine which
        # DeveloperMetadata entries to return. DeveloperMetadata matching any of the
        # specified filters are included in the response.
        # Corresponds to the JSON property `dataFilters`
        # @return [Array<Google::Apis::SheetsV4::DataFilter>]
        attr_accessor :data_filters
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @data_filters = args[:data_filters] if args.key?(:data_filters)
        end
      end
      
      # A reply to a developer metadata search request.
      class SearchDeveloperMetadataResponse
        include Google::Apis::Core::Hashable
      
        # The metadata matching the criteria of the search request.
        # Corresponds to the JSON property `matchedDeveloperMetadata`
        # @return [Array<Google::Apis::SheetsV4::MatchedDeveloperMetadata>]
        attr_accessor :matched_developer_metadata
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @matched_developer_metadata = args[:matched_developer_metadata] if args.key?(:matched_developer_metadata)
        end
      end
      
      # Sets the basic filter associated with a sheet.
      class SetBasicFilterRequest
        include Google::Apis::Core::Hashable
      
        # The default filter associated with a sheet.
        # Corresponds to the JSON property `filter`
        # @return [Google::Apis::SheetsV4::BasicFilter]
        attr_accessor :filter
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @filter = args[:filter] if args.key?(:filter)
        end
      end
      
      # Sets a data validation rule to every cell in the range. To clear validation in
      # a range, call this with no rule specified.
      class SetDataValidationRequest
        include Google::Apis::Core::Hashable
      
        # A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
        # the start index is inclusive and the end index is exclusive -- [start_index,
        # end_index). Missing indexes indicate the range is unbounded on that side. For
        # example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
        # start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
        # 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
        # start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
        # sheet_id:0` The start index must always be less than or equal to the end index.
        # If the start index equals the end index, then the range is empty. Empty
        # ranges are typically not meaningful and are usually rendered in the UI as `#
        # REF!`.
        # Corresponds to the JSON property `range`
        # @return [Google::Apis::SheetsV4::GridRange]
        attr_accessor :range
      
        # A data validation rule.
        # Corresponds to the JSON property `rule`
        # @return [Google::Apis::SheetsV4::DataValidationRule]
        attr_accessor :rule
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @range = args[:range] if args.key?(:range)
          @rule = args[:rule] if args.key?(:rule)
        end
      end
      
      # A sheet in a spreadsheet.
      class Sheet
        include Google::Apis::Core::Hashable
      
        # The banded (alternating colors) ranges on this sheet.
        # Corresponds to the JSON property `bandedRanges`
        # @return [Array<Google::Apis::SheetsV4::BandedRange>]
        attr_accessor :banded_ranges
      
        # The default filter associated with a sheet.
        # Corresponds to the JSON property `basicFilter`
        # @return [Google::Apis::SheetsV4::BasicFilter]
        attr_accessor :basic_filter
      
        # The specifications of every chart on this sheet.
        # Corresponds to the JSON property `charts`
        # @return [Array<Google::Apis::SheetsV4::EmbeddedChart>]
        attr_accessor :charts
      
        # All column groups on this sheet, ordered by increasing range start index, then
        # by group depth.
        # Corresponds to the JSON property `columnGroups`
        # @return [Array<Google::Apis::SheetsV4::DimensionGroup>]
        attr_accessor :column_groups
      
        # The conditional format rules in this sheet.
        # Corresponds to the JSON property `conditionalFormats`
        # @return [Array<Google::Apis::SheetsV4::ConditionalFormatRule>]
        attr_accessor :conditional_formats
      
        # Data in the grid, if this is a grid sheet. The number of GridData objects
        # returned is dependent on the number of ranges requested on this sheet. For
        # example, if this is representing `Sheet1`, and the spreadsheet was requested
        # with ranges `Sheet1!A1:C10` and `Sheet1!D15:E20`, then the first GridData will
        # have a startRow/startColumn of `0`, while the second one will have `startRow
        # 14` (zero-based row 15), and `startColumn 3` (zero-based column D). For a
        # DATA_SOURCE sheet, you can not request a specific range, the GridData contains
        # all the values.
        # Corresponds to the JSON property `data`
        # @return [Array<Google::Apis::SheetsV4::GridData>]
        attr_accessor :data
      
        # The developer metadata associated with a sheet.
        # Corresponds to the JSON property `developerMetadata`
        # @return [Array<Google::Apis::SheetsV4::DeveloperMetadata>]
        attr_accessor :developer_metadata
      
        # The filter views in this sheet.
        # Corresponds to the JSON property `filterViews`
        # @return [Array<Google::Apis::SheetsV4::FilterView>]
        attr_accessor :filter_views
      
        # The ranges that are merged together.
        # Corresponds to the JSON property `merges`
        # @return [Array<Google::Apis::SheetsV4::GridRange>]
        attr_accessor :merges
      
        # Properties of a sheet.
        # Corresponds to the JSON property `properties`
        # @return [Google::Apis::SheetsV4::SheetProperties]
        attr_accessor :properties
      
        # The protected ranges in this sheet.
        # Corresponds to the JSON property `protectedRanges`
        # @return [Array<Google::Apis::SheetsV4::ProtectedRange>]
        attr_accessor :protected_ranges
      
        # All row groups on this sheet, ordered by increasing range start index, then by
        # group depth.
        # Corresponds to the JSON property `rowGroups`
        # @return [Array<Google::Apis::SheetsV4::DimensionGroup>]
        attr_accessor :row_groups
      
        # The slicers on this sheet.
        # Corresponds to the JSON property `slicers`
        # @return [Array<Google::Apis::SheetsV4::Slicer>]
        attr_accessor :slicers
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @banded_ranges = args[:banded_ranges] if args.key?(:banded_ranges)
          @basic_filter = args[:basic_filter] if args.key?(:basic_filter)
          @charts = args[:charts] if args.key?(:charts)
          @column_groups = args[:column_groups] if args.key?(:column_groups)
          @conditional_formats = args[:conditional_formats] if args.key?(:conditional_formats)
          @data = args[:data] if args.key?(:data)
          @developer_metadata = args[:developer_metadata] if args.key?(:developer_metadata)
          @filter_views = args[:filter_views] if args.key?(:filter_views)
          @merges = args[:merges] if args.key?(:merges)
          @properties = args[:properties] if args.key?(:properties)
          @protected_ranges = args[:protected_ranges] if args.key?(:protected_ranges)
          @row_groups = args[:row_groups] if args.key?(:row_groups)
          @slicers = args[:slicers] if args.key?(:slicers)
        end
      end
      
      # Properties of a sheet.
      class SheetProperties
        include Google::Apis::Core::Hashable
      
        # Additional properties of a DATA_SOURCE sheet.
        # Corresponds to the JSON property `dataSourceSheetProperties`
        # @return [Google::Apis::SheetsV4::DataSourceSheetProperties]
        attr_accessor :data_source_sheet_properties
      
        # Properties of a grid.
        # Corresponds to the JSON property `gridProperties`
        # @return [Google::Apis::SheetsV4::GridProperties]
        attr_accessor :grid_properties
      
        # True if the sheet is hidden in the UI, false if it's visible.
        # Corresponds to the JSON property `hidden`
        # @return [Boolean]
        attr_accessor :hidden
        alias_method :hidden?, :hidden
      
        # The index of the sheet within the spreadsheet. When adding or updating sheet
        # properties, if this field is excluded then the sheet is added or moved to the
        # end of the sheet list. When updating sheet indices or inserting sheets,
        # movement is considered in "before the move" indexes. For example, if there
        # were 3 sheets (S1, S2, S3) in order to move S1 ahead of S2 the index would
        # have to be set to 2. A sheet index update request is ignored if the requested
        # index is identical to the sheets current index or if the requested new index
        # is equal to the current sheet index + 1.
        # Corresponds to the JSON property `index`
        # @return [Fixnum]
        attr_accessor :index
      
        # True if the sheet is an RTL sheet instead of an LTR sheet.
        # Corresponds to the JSON property `rightToLeft`
        # @return [Boolean]
        attr_accessor :right_to_left
        alias_method :right_to_left?, :right_to_left
      
        # The ID of the sheet. Must be non-negative. This field cannot be changed once
        # set.
        # Corresponds to the JSON property `sheetId`
        # @return [Fixnum]
        attr_accessor :sheet_id
      
        # The type of sheet. Defaults to GRID. This field cannot be changed once set.
        # Corresponds to the JSON property `sheetType`
        # @return [String]
        attr_accessor :sheet_type
      
        # Represents a color in the RGBA color space. This representation is designed
        # for simplicity of conversion to/from color representations in various
        # languages over compactness; for example, the fields of this representation can
        # be trivially provided to the constructor of "java.awt.Color" in Java; it can
        # also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
        # method in iOS; and, with just a little work, it can be easily formatted into a
        # CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
        # information about the absolute color space that should be used to interpret
        # the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
        # applications SHOULD assume the sRGB color space. Note: when color equality
        # needs to be decided, implementations, unless documented otherwise, will treat
        # two colors to be equal if all their red, green, blue and alpha values each
        # differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
        # public static java.awt.Color fromProto(Color protocolor) ` float alpha =
        # protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
        # java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
        # ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
        # float) color.getRed(); float green = (float) color.getGreen(); float blue = (
        # float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
        # = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
        # .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
        # ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
        # denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
        # Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
        # protocolor red]; float green = [protocolor green]; float blue = [protocolor
        # blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
        # alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
        # colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
        # UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
        # green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
        # alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
        # blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
        # [result autorelease]; return result; ` // ... Example (JavaScript): // ...
        # var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
        # var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
        # var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
        # var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
        # rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
        # 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
        # ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
        # ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
        # hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
        # var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
        # resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
        # join(''); `; // ...
        # Corresponds to the JSON property `tabColor`
        # @return [Google::Apis::SheetsV4::Color]
        attr_accessor :tab_color
      
        # A color value.
        # Corresponds to the JSON property `tabColorStyle`
        # @return [Google::Apis::SheetsV4::ColorStyle]
        attr_accessor :tab_color_style
      
        # The name of the sheet.
        # Corresponds to the JSON property `title`
        # @return [String]
        attr_accessor :title
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @data_source_sheet_properties = args[:data_source_sheet_properties] if args.key?(:data_source_sheet_properties)
          @grid_properties = args[:grid_properties] if args.key?(:grid_properties)
          @hidden = args[:hidden] if args.key?(:hidden)
          @index = args[:index] if args.key?(:index)
          @right_to_left = args[:right_to_left] if args.key?(:right_to_left)
          @sheet_id = args[:sheet_id] if args.key?(:sheet_id)
          @sheet_type = args[:sheet_type] if args.key?(:sheet_type)
          @tab_color = args[:tab_color] if args.key?(:tab_color)
          @tab_color_style = args[:tab_color_style] if args.key?(:tab_color_style)
          @title = args[:title] if args.key?(:title)
        end
      end
      
      # A slicer in a sheet.
      class Slicer
        include Google::Apis::Core::Hashable
      
        # The position of an embedded object such as a chart.
        # Corresponds to the JSON property `position`
        # @return [Google::Apis::SheetsV4::EmbeddedObjectPosition]
        attr_accessor :position
      
        # The ID of the slicer.
        # Corresponds to the JSON property `slicerId`
        # @return [Fixnum]
        attr_accessor :slicer_id
      
        # The specifications of a slicer.
        # Corresponds to the JSON property `spec`
        # @return [Google::Apis::SheetsV4::SlicerSpec]
        attr_accessor :spec
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @position = args[:position] if args.key?(:position)
          @slicer_id = args[:slicer_id] if args.key?(:slicer_id)
          @spec = args[:spec] if args.key?(:spec)
        end
      end
      
      # The specifications of a slicer.
      class SlicerSpec
        include Google::Apis::Core::Hashable
      
        # True if the filter should apply to pivot tables. If not set, default to `True`.
        # Corresponds to the JSON property `applyToPivotTables`
        # @return [Boolean]
        attr_accessor :apply_to_pivot_tables
        alias_method :apply_to_pivot_tables?, :apply_to_pivot_tables
      
        # Represents a color in the RGBA color space. This representation is designed
        # for simplicity of conversion to/from color representations in various
        # languages over compactness; for example, the fields of this representation can
        # be trivially provided to the constructor of "java.awt.Color" in Java; it can
        # also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
        # method in iOS; and, with just a little work, it can be easily formatted into a
        # CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
        # information about the absolute color space that should be used to interpret
        # the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
        # applications SHOULD assume the sRGB color space. Note: when color equality
        # needs to be decided, implementations, unless documented otherwise, will treat
        # two colors to be equal if all their red, green, blue and alpha values each
        # differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
        # public static java.awt.Color fromProto(Color protocolor) ` float alpha =
        # protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
        # java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
        # ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
        # float) color.getRed(); float green = (float) color.getGreen(); float blue = (
        # float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
        # = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
        # .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
        # ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
        # denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
        # Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
        # protocolor red]; float green = [protocolor green]; float blue = [protocolor
        # blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
        # alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
        # colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
        # UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
        # green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
        # alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
        # blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
        # [result autorelease]; return result; ` // ... Example (JavaScript): // ...
        # var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
        # var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
        # var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
        # var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
        # rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
        # 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
        # ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
        # ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
        # hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
        # var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
        # resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
        # join(''); `; // ...
        # Corresponds to the JSON property `backgroundColor`
        # @return [Google::Apis::SheetsV4::Color]
        attr_accessor :background_color
      
        # A color value.
        # Corresponds to the JSON property `backgroundColorStyle`
        # @return [Google::Apis::SheetsV4::ColorStyle]
        attr_accessor :background_color_style
      
        # The column index in the data table on which the filter is applied to.
        # Corresponds to the JSON property `columnIndex`
        # @return [Fixnum]
        attr_accessor :column_index
      
        # A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
        # the start index is inclusive and the end index is exclusive -- [start_index,
        # end_index). Missing indexes indicate the range is unbounded on that side. For
        # example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
        # start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
        # 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
        # start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
        # sheet_id:0` The start index must always be less than or equal to the end index.
        # If the start index equals the end index, then the range is empty. Empty
        # ranges are typically not meaningful and are usually rendered in the UI as `#
        # REF!`.
        # Corresponds to the JSON property `dataRange`
        # @return [Google::Apis::SheetsV4::GridRange]
        attr_accessor :data_range
      
        # Criteria for showing/hiding rows in a filter or filter view.
        # Corresponds to the JSON property `filterCriteria`
        # @return [Google::Apis::SheetsV4::FilterCriteria]
        attr_accessor :filter_criteria
      
        # The horizontal alignment of title in the slicer. If unspecified, defaults to `
        # LEFT`
        # Corresponds to the JSON property `horizontalAlignment`
        # @return [String]
        attr_accessor :horizontal_alignment
      
        # The format of a run of text in a cell. Absent values indicate that the field
        # isn't specified.
        # Corresponds to the JSON property `textFormat`
        # @return [Google::Apis::SheetsV4::TextFormat]
        attr_accessor :text_format
      
        # The title of the slicer.
        # Corresponds to the JSON property `title`
        # @return [String]
        attr_accessor :title
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @apply_to_pivot_tables = args[:apply_to_pivot_tables] if args.key?(:apply_to_pivot_tables)
          @background_color = args[:background_color] if args.key?(:background_color)
          @background_color_style = args[:background_color_style] if args.key?(:background_color_style)
          @column_index = args[:column_index] if args.key?(:column_index)
          @data_range = args[:data_range] if args.key?(:data_range)
          @filter_criteria = args[:filter_criteria] if args.key?(:filter_criteria)
          @horizontal_alignment = args[:horizontal_alignment] if args.key?(:horizontal_alignment)
          @text_format = args[:text_format] if args.key?(:text_format)
          @title = args[:title] if args.key?(:title)
        end
      end
      
      # Sorts data in rows based on a sort order per column.
      class SortRangeRequest
        include Google::Apis::Core::Hashable
      
        # A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
        # the start index is inclusive and the end index is exclusive -- [start_index,
        # end_index). Missing indexes indicate the range is unbounded on that side. For
        # example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
        # start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
        # 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
        # start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
        # sheet_id:0` The start index must always be less than or equal to the end index.
        # If the start index equals the end index, then the range is empty. Empty
        # ranges are typically not meaningful and are usually rendered in the UI as `#
        # REF!`.
        # Corresponds to the JSON property `range`
        # @return [Google::Apis::SheetsV4::GridRange]
        attr_accessor :range
      
        # The sort order per column. Later specifications are used when values are equal
        # in the earlier specifications.
        # Corresponds to the JSON property `sortSpecs`
        # @return [Array<Google::Apis::SheetsV4::SortSpec>]
        attr_accessor :sort_specs
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @range = args[:range] if args.key?(:range)
          @sort_specs = args[:sort_specs] if args.key?(:sort_specs)
        end
      end
      
      # A sort order associated with a specific column or row.
      class SortSpec
        include Google::Apis::Core::Hashable
      
        # Represents a color in the RGBA color space. This representation is designed
        # for simplicity of conversion to/from color representations in various
        # languages over compactness; for example, the fields of this representation can
        # be trivially provided to the constructor of "java.awt.Color" in Java; it can
        # also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
        # method in iOS; and, with just a little work, it can be easily formatted into a
        # CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
        # information about the absolute color space that should be used to interpret
        # the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
        # applications SHOULD assume the sRGB color space. Note: when color equality
        # needs to be decided, implementations, unless documented otherwise, will treat
        # two colors to be equal if all their red, green, blue and alpha values each
        # differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
        # public static java.awt.Color fromProto(Color protocolor) ` float alpha =
        # protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
        # java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
        # ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
        # float) color.getRed(); float green = (float) color.getGreen(); float blue = (
        # float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
        # = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
        # .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
        # ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
        # denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
        # Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
        # protocolor red]; float green = [protocolor green]; float blue = [protocolor
        # blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
        # alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
        # colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
        # UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
        # green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
        # alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
        # blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
        # [result autorelease]; return result; ` // ... Example (JavaScript): // ...
        # var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
        # var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
        # var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
        # var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
        # rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
        # 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
        # ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
        # ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
        # hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
        # var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
        # resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
        # join(''); `; // ...
        # Corresponds to the JSON property `backgroundColor`
        # @return [Google::Apis::SheetsV4::Color]
        attr_accessor :background_color
      
        # A color value.
        # Corresponds to the JSON property `backgroundColorStyle`
        # @return [Google::Apis::SheetsV4::ColorStyle]
        attr_accessor :background_color_style
      
        # An unique identifier that references a data source column.
        # Corresponds to the JSON property `dataSourceColumnReference`
        # @return [Google::Apis::SheetsV4::DataSourceColumnReference]
        attr_accessor :data_source_column_reference
      
        # The dimension the sort should be applied to.
        # Corresponds to the JSON property `dimensionIndex`
        # @return [Fixnum]
        attr_accessor :dimension_index
      
        # Represents a color in the RGBA color space. This representation is designed
        # for simplicity of conversion to/from color representations in various
        # languages over compactness; for example, the fields of this representation can
        # be trivially provided to the constructor of "java.awt.Color" in Java; it can
        # also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
        # method in iOS; and, with just a little work, it can be easily formatted into a
        # CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
        # information about the absolute color space that should be used to interpret
        # the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
        # applications SHOULD assume the sRGB color space. Note: when color equality
        # needs to be decided, implementations, unless documented otherwise, will treat
        # two colors to be equal if all their red, green, blue and alpha values each
        # differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
        # public static java.awt.Color fromProto(Color protocolor) ` float alpha =
        # protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
        # java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
        # ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
        # float) color.getRed(); float green = (float) color.getGreen(); float blue = (
        # float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
        # = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
        # .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
        # ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
        # denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
        # Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
        # protocolor red]; float green = [protocolor green]; float blue = [protocolor
        # blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
        # alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
        # colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
        # UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
        # green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
        # alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
        # blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
        # [result autorelease]; return result; ` // ... Example (JavaScript): // ...
        # var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
        # var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
        # var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
        # var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
        # rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
        # 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
        # ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
        # ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
        # hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
        # var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
        # resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
        # join(''); `; // ...
        # Corresponds to the JSON property `foregroundColor`
        # @return [Google::Apis::SheetsV4::Color]
        attr_accessor :foreground_color
      
        # A color value.
        # Corresponds to the JSON property `foregroundColorStyle`
        # @return [Google::Apis::SheetsV4::ColorStyle]
        attr_accessor :foreground_color_style
      
        # The order data should be sorted.
        # Corresponds to the JSON property `sortOrder`
        # @return [String]
        attr_accessor :sort_order
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @background_color = args[:background_color] if args.key?(:background_color)
          @background_color_style = args[:background_color_style] if args.key?(:background_color_style)
          @data_source_column_reference = args[:data_source_column_reference] if args.key?(:data_source_column_reference)
          @dimension_index = args[:dimension_index] if args.key?(:dimension_index)
          @foreground_color = args[:foreground_color] if args.key?(:foreground_color)
          @foreground_color_style = args[:foreground_color_style] if args.key?(:foreground_color_style)
          @sort_order = args[:sort_order] if args.key?(:sort_order)
        end
      end
      
      # A combination of a source range and how to extend that source.
      class SourceAndDestination
        include Google::Apis::Core::Hashable
      
        # The dimension that data should be filled into.
        # Corresponds to the JSON property `dimension`
        # @return [String]
        attr_accessor :dimension
      
        # The number of rows or columns that data should be filled into. Positive
        # numbers expand beyond the last row or last column of the source. Negative
        # numbers expand before the first row or first column of the source.
        # Corresponds to the JSON property `fillLength`
        # @return [Fixnum]
        attr_accessor :fill_length
      
        # A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
        # the start index is inclusive and the end index is exclusive -- [start_index,
        # end_index). Missing indexes indicate the range is unbounded on that side. For
        # example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
        # start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
        # 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
        # start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
        # sheet_id:0` The start index must always be less than or equal to the end index.
        # If the start index equals the end index, then the range is empty. Empty
        # ranges are typically not meaningful and are usually rendered in the UI as `#
        # REF!`.
        # Corresponds to the JSON property `source`
        # @return [Google::Apis::SheetsV4::GridRange]
        attr_accessor :source
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @dimension = args[:dimension] if args.key?(:dimension)
          @fill_length = args[:fill_length] if args.key?(:fill_length)
          @source = args[:source] if args.key?(:source)
        end
      end
      
      # Resource that represents a spreadsheet.
      class Spreadsheet
        include Google::Apis::Core::Hashable
      
        # Output only. A list of data source refresh schedules.
        # Corresponds to the JSON property `dataSourceSchedules`
        # @return [Array<Google::Apis::SheetsV4::DataSourceRefreshSchedule>]
        attr_accessor :data_source_schedules
      
        # A list of external data sources connected with the spreadsheet.
        # Corresponds to the JSON property `dataSources`
        # @return [Array<Google::Apis::SheetsV4::DataSource>]
        attr_accessor :data_sources
      
        # The developer metadata associated with a spreadsheet.
        # Corresponds to the JSON property `developerMetadata`
        # @return [Array<Google::Apis::SheetsV4::DeveloperMetadata>]
        attr_accessor :developer_metadata
      
        # The named ranges defined in a spreadsheet.
        # Corresponds to the JSON property `namedRanges`
        # @return [Array<Google::Apis::SheetsV4::NamedRange>]
        attr_accessor :named_ranges
      
        # Properties of a spreadsheet.
        # Corresponds to the JSON property `properties`
        # @return [Google::Apis::SheetsV4::SpreadsheetProperties]
        attr_accessor :properties
      
        # The sheets that are part of a spreadsheet.
        # Corresponds to the JSON property `sheets`
        # @return [Array<Google::Apis::SheetsV4::Sheet>]
        attr_accessor :sheets
      
        # The ID of the spreadsheet. This field is read-only.
        # Corresponds to the JSON property `spreadsheetId`
        # @return [String]
        attr_accessor :spreadsheet_id
      
        # The url of the spreadsheet. This field is read-only.
        # Corresponds to the JSON property `spreadsheetUrl`
        # @return [String]
        attr_accessor :spreadsheet_url
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @data_source_schedules = args[:data_source_schedules] if args.key?(:data_source_schedules)
          @data_sources = args[:data_sources] if args.key?(:data_sources)
          @developer_metadata = args[:developer_metadata] if args.key?(:developer_metadata)
          @named_ranges = args[:named_ranges] if args.key?(:named_ranges)
          @properties = args[:properties] if args.key?(:properties)
          @sheets = args[:sheets] if args.key?(:sheets)
          @spreadsheet_id = args[:spreadsheet_id] if args.key?(:spreadsheet_id)
          @spreadsheet_url = args[:spreadsheet_url] if args.key?(:spreadsheet_url)
        end
      end
      
      # Properties of a spreadsheet.
      class SpreadsheetProperties
        include Google::Apis::Core::Hashable
      
        # The amount of time to wait before volatile functions are recalculated.
        # Corresponds to the JSON property `autoRecalc`
        # @return [String]
        attr_accessor :auto_recalc
      
        # The format of a cell.
        # Corresponds to the JSON property `defaultFormat`
        # @return [Google::Apis::SheetsV4::CellFormat]
        attr_accessor :default_format
      
        # Settings to control how circular dependencies are resolved with iterative
        # calculation.
        # Corresponds to the JSON property `iterativeCalculationSettings`
        # @return [Google::Apis::SheetsV4::IterativeCalculationSettings]
        attr_accessor :iterative_calculation_settings
      
        # The locale of the spreadsheet in one of the following formats: * an ISO 639-1
        # language code such as `en` * an ISO 639-2 language code such as `fil`, if no
        # 639-1 code exists * a combination of the ISO language code and country code,
        # such as `en_US` Note: when updating this field, not all locales/languages are
        # supported.
        # Corresponds to the JSON property `locale`
        # @return [String]
        attr_accessor :locale
      
        # Represents spreadsheet theme
        # Corresponds to the JSON property `spreadsheetTheme`
        # @return [Google::Apis::SheetsV4::SpreadsheetTheme]
        attr_accessor :spreadsheet_theme
      
        # The time zone of the spreadsheet, in CLDR format such as `America/New_York`.
        # If the time zone isn't recognized, this may be a custom time zone such as `GMT-
        # 07:00`.
        # Corresponds to the JSON property `timeZone`
        # @return [String]
        attr_accessor :time_zone
      
        # The title of the spreadsheet.
        # Corresponds to the JSON property `title`
        # @return [String]
        attr_accessor :title
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @auto_recalc = args[:auto_recalc] if args.key?(:auto_recalc)
          @default_format = args[:default_format] if args.key?(:default_format)
          @iterative_calculation_settings = args[:iterative_calculation_settings] if args.key?(:iterative_calculation_settings)
          @locale = args[:locale] if args.key?(:locale)
          @spreadsheet_theme = args[:spreadsheet_theme] if args.key?(:spreadsheet_theme)
          @time_zone = args[:time_zone] if args.key?(:time_zone)
          @title = args[:title] if args.key?(:title)
        end
      end
      
      # Represents spreadsheet theme
      class SpreadsheetTheme
        include Google::Apis::Core::Hashable
      
        # Name of the primary font family.
        # Corresponds to the JSON property `primaryFontFamily`
        # @return [String]
        attr_accessor :primary_font_family
      
        # The spreadsheet theme color pairs. To update you must provide all theme color
        # pairs.
        # Corresponds to the JSON property `themeColors`
        # @return [Array<Google::Apis::SheetsV4::ThemeColorPair>]
        attr_accessor :theme_colors
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @primary_font_family = args[:primary_font_family] if args.key?(:primary_font_family)
          @theme_colors = args[:theme_colors] if args.key?(:theme_colors)
        end
      end
      
      # The format of a run of text in a cell. Absent values indicate that the field
      # isn't specified.
      class TextFormat
        include Google::Apis::Core::Hashable
      
        # True if the text is bold.
        # Corresponds to the JSON property `bold`
        # @return [Boolean]
        attr_accessor :bold
        alias_method :bold?, :bold
      
        # The font family.
        # Corresponds to the JSON property `fontFamily`
        # @return [String]
        attr_accessor :font_family
      
        # The size of the font.
        # Corresponds to the JSON property `fontSize`
        # @return [Fixnum]
        attr_accessor :font_size
      
        # Represents a color in the RGBA color space. This representation is designed
        # for simplicity of conversion to/from color representations in various
        # languages over compactness; for example, the fields of this representation can
        # be trivially provided to the constructor of "java.awt.Color" in Java; it can
        # also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
        # method in iOS; and, with just a little work, it can be easily formatted into a
        # CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
        # information about the absolute color space that should be used to interpret
        # the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
        # applications SHOULD assume the sRGB color space. Note: when color equality
        # needs to be decided, implementations, unless documented otherwise, will treat
        # two colors to be equal if all their red, green, blue and alpha values each
        # differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
        # public static java.awt.Color fromProto(Color protocolor) ` float alpha =
        # protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
        # java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
        # ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
        # float) color.getRed(); float green = (float) color.getGreen(); float blue = (
        # float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
        # = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
        # .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
        # ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
        # denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
        # Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
        # protocolor red]; float green = [protocolor green]; float blue = [protocolor
        # blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
        # alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
        # colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
        # UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
        # green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
        # alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
        # blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
        # [result autorelease]; return result; ` // ... Example (JavaScript): // ...
        # var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
        # var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
        # var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
        # var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
        # rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
        # 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
        # ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
        # ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
        # hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
        # var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
        # resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
        # join(''); `; // ...
        # Corresponds to the JSON property `foregroundColor`
        # @return [Google::Apis::SheetsV4::Color]
        attr_accessor :foreground_color
      
        # A color value.
        # Corresponds to the JSON property `foregroundColorStyle`
        # @return [Google::Apis::SheetsV4::ColorStyle]
        attr_accessor :foreground_color_style
      
        # True if the text is italicized.
        # Corresponds to the JSON property `italic`
        # @return [Boolean]
        attr_accessor :italic
        alias_method :italic?, :italic
      
        # True if the text has a strikethrough.
        # Corresponds to the JSON property `strikethrough`
        # @return [Boolean]
        attr_accessor :strikethrough
        alias_method :strikethrough?, :strikethrough
      
        # True if the text is underlined.
        # Corresponds to the JSON property `underline`
        # @return [Boolean]
        attr_accessor :underline
        alias_method :underline?, :underline
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @bold = args[:bold] if args.key?(:bold)
          @font_family = args[:font_family] if args.key?(:font_family)
          @font_size = args[:font_size] if args.key?(:font_size)
          @foreground_color = args[:foreground_color] if args.key?(:foreground_color)
          @foreground_color_style = args[:foreground_color_style] if args.key?(:foreground_color_style)
          @italic = args[:italic] if args.key?(:italic)
          @strikethrough = args[:strikethrough] if args.key?(:strikethrough)
          @underline = args[:underline] if args.key?(:underline)
        end
      end
      
      # A run of a text format. The format of this run continues until the start index
      # of the next run. When updating, all fields must be set.
      class TextFormatRun
        include Google::Apis::Core::Hashable
      
        # The format of a run of text in a cell. Absent values indicate that the field
        # isn't specified.
        # Corresponds to the JSON property `format`
        # @return [Google::Apis::SheetsV4::TextFormat]
        attr_accessor :format
      
        # The character index where this run starts.
        # Corresponds to the JSON property `startIndex`
        # @return [Fixnum]
        attr_accessor :start_index
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @format = args[:format] if args.key?(:format)
          @start_index = args[:start_index] if args.key?(:start_index)
        end
      end
      
      # Position settings for text.
      class TextPosition
        include Google::Apis::Core::Hashable
      
        # Horizontal alignment setting for the piece of text.
        # Corresponds to the JSON property `horizontalAlignment`
        # @return [String]
        attr_accessor :horizontal_alignment
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @horizontal_alignment = args[:horizontal_alignment] if args.key?(:horizontal_alignment)
        end
      end
      
      # The rotation applied to text in a cell.
      class TextRotation
        include Google::Apis::Core::Hashable
      
        # The angle between the standard orientation and the desired orientation.
        # Measured in degrees. Valid values are between -90 and 90. Positive angles are
        # angled upwards, negative are angled downwards. Note: For LTR text direction
        # positive angles are in the counterclockwise direction, whereas for RTL they
        # are in the clockwise direction
        # Corresponds to the JSON property `angle`
        # @return [Fixnum]
        attr_accessor :angle
      
        # If true, text reads top to bottom, but the orientation of individual
        # characters is unchanged. For example: | V | | e | | r | | t | | i | | c | | a |
        # | l |
        # Corresponds to the JSON property `vertical`
        # @return [Boolean]
        attr_accessor :vertical
        alias_method :vertical?, :vertical
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @angle = args[:angle] if args.key?(:angle)
          @vertical = args[:vertical] if args.key?(:vertical)
        end
      end
      
      # Splits a column of text into multiple columns, based on a delimiter in each
      # cell.
      class TextToColumnsRequest
        include Google::Apis::Core::Hashable
      
        # The delimiter to use. Used only if delimiterType is CUSTOM.
        # Corresponds to the JSON property `delimiter`
        # @return [String]
        attr_accessor :delimiter
      
        # The delimiter type to use.
        # Corresponds to the JSON property `delimiterType`
        # @return [String]
        attr_accessor :delimiter_type
      
        # A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
        # the start index is inclusive and the end index is exclusive -- [start_index,
        # end_index). Missing indexes indicate the range is unbounded on that side. For
        # example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
        # start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
        # 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
        # start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
        # sheet_id:0` The start index must always be less than or equal to the end index.
        # If the start index equals the end index, then the range is empty. Empty
        # ranges are typically not meaningful and are usually rendered in the UI as `#
        # REF!`.
        # Corresponds to the JSON property `source`
        # @return [Google::Apis::SheetsV4::GridRange]
        attr_accessor :source
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @delimiter = args[:delimiter] if args.key?(:delimiter)
          @delimiter_type = args[:delimiter_type] if args.key?(:delimiter_type)
          @source = args[:source] if args.key?(:source)
        end
      end
      
      # A pair mapping a spreadsheet theme color type to the concrete color it
      # represents.
      class ThemeColorPair
        include Google::Apis::Core::Hashable
      
        # A color value.
        # Corresponds to the JSON property `color`
        # @return [Google::Apis::SheetsV4::ColorStyle]
        attr_accessor :color
      
        # The type of the spreadsheet theme color.
        # Corresponds to the JSON property `colorType`
        # @return [String]
        attr_accessor :color_type
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @color = args[:color] if args.key?(:color)
          @color_type = args[:color_type] if args.key?(:color_type)
        end
      end
      
      # Represents a time of day. The date and time zone are either not significant or
      # are specified elsewhere. An API may choose to allow leap seconds. Related
      # types are google.type.Date and `google.protobuf.Timestamp`.
      class TimeOfDay
        include Google::Apis::Core::Hashable
      
        # Hours of day in 24 hour format. Should be from 0 to 23. An API may choose to
        # allow the value "24:00:00" for scenarios like business closing time.
        # Corresponds to the JSON property `hours`
        # @return [Fixnum]
        attr_accessor :hours
      
        # Minutes of hour of day. Must be from 0 to 59.
        # Corresponds to the JSON property `minutes`
        # @return [Fixnum]
        attr_accessor :minutes
      
        # Fractions of seconds in nanoseconds. Must be from 0 to 999,999,999.
        # Corresponds to the JSON property `nanos`
        # @return [Fixnum]
        attr_accessor :nanos
      
        # Seconds of minutes of the time. Must normally be from 0 to 59. An API may
        # allow the value 60 if it allows leap-seconds.
        # Corresponds to the JSON property `seconds`
        # @return [Fixnum]
        attr_accessor :seconds
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @hours = args[:hours] if args.key?(:hours)
          @minutes = args[:minutes] if args.key?(:minutes)
          @nanos = args[:nanos] if args.key?(:nanos)
          @seconds = args[:seconds] if args.key?(:seconds)
        end
      end
      
      # A color scale for a treemap chart.
      class TreemapChartColorScale
        include Google::Apis::Core::Hashable
      
        # Represents a color in the RGBA color space. This representation is designed
        # for simplicity of conversion to/from color representations in various
        # languages over compactness; for example, the fields of this representation can
        # be trivially provided to the constructor of "java.awt.Color" in Java; it can
        # also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
        # method in iOS; and, with just a little work, it can be easily formatted into a
        # CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
        # information about the absolute color space that should be used to interpret
        # the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
        # applications SHOULD assume the sRGB color space. Note: when color equality
        # needs to be decided, implementations, unless documented otherwise, will treat
        # two colors to be equal if all their red, green, blue and alpha values each
        # differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
        # public static java.awt.Color fromProto(Color protocolor) ` float alpha =
        # protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
        # java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
        # ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
        # float) color.getRed(); float green = (float) color.getGreen(); float blue = (
        # float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
        # = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
        # .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
        # ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
        # denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
        # Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
        # protocolor red]; float green = [protocolor green]; float blue = [protocolor
        # blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
        # alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
        # colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
        # UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
        # green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
        # alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
        # blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
        # [result autorelease]; return result; ` // ... Example (JavaScript): // ...
        # var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
        # var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
        # var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
        # var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
        # rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
        # 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
        # ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
        # ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
        # hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
        # var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
        # resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
        # join(''); `; // ...
        # Corresponds to the JSON property `maxValueColor`
        # @return [Google::Apis::SheetsV4::Color]
        attr_accessor :max_value_color
      
        # A color value.
        # Corresponds to the JSON property `maxValueColorStyle`
        # @return [Google::Apis::SheetsV4::ColorStyle]
        attr_accessor :max_value_color_style
      
        # Represents a color in the RGBA color space. This representation is designed
        # for simplicity of conversion to/from color representations in various
        # languages over compactness; for example, the fields of this representation can
        # be trivially provided to the constructor of "java.awt.Color" in Java; it can
        # also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
        # method in iOS; and, with just a little work, it can be easily formatted into a
        # CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
        # information about the absolute color space that should be used to interpret
        # the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
        # applications SHOULD assume the sRGB color space. Note: when color equality
        # needs to be decided, implementations, unless documented otherwise, will treat
        # two colors to be equal if all their red, green, blue and alpha values each
        # differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
        # public static java.awt.Color fromProto(Color protocolor) ` float alpha =
        # protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
        # java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
        # ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
        # float) color.getRed(); float green = (float) color.getGreen(); float blue = (
        # float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
        # = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
        # .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
        # ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
        # denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
        # Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
        # protocolor red]; float green = [protocolor green]; float blue = [protocolor
        # blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
        # alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
        # colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
        # UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
        # green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
        # alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
        # blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
        # [result autorelease]; return result; ` // ... Example (JavaScript): // ...
        # var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
        # var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
        # var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
        # var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
        # rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
        # 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
        # ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
        # ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
        # hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
        # var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
        # resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
        # join(''); `; // ...
        # Corresponds to the JSON property `midValueColor`
        # @return [Google::Apis::SheetsV4::Color]
        attr_accessor :mid_value_color
      
        # A color value.
        # Corresponds to the JSON property `midValueColorStyle`
        # @return [Google::Apis::SheetsV4::ColorStyle]
        attr_accessor :mid_value_color_style
      
        # Represents a color in the RGBA color space. This representation is designed
        # for simplicity of conversion to/from color representations in various
        # languages over compactness; for example, the fields of this representation can
        # be trivially provided to the constructor of "java.awt.Color" in Java; it can
        # also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
        # method in iOS; and, with just a little work, it can be easily formatted into a
        # CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
        # information about the absolute color space that should be used to interpret
        # the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
        # applications SHOULD assume the sRGB color space. Note: when color equality
        # needs to be decided, implementations, unless documented otherwise, will treat
        # two colors to be equal if all their red, green, blue and alpha values each
        # differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
        # public static java.awt.Color fromProto(Color protocolor) ` float alpha =
        # protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
        # java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
        # ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
        # float) color.getRed(); float green = (float) color.getGreen(); float blue = (
        # float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
        # = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
        # .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
        # ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
        # denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
        # Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
        # protocolor red]; float green = [protocolor green]; float blue = [protocolor
        # blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
        # alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
        # colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
        # UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
        # green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
        # alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
        # blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
        # [result autorelease]; return result; ` // ... Example (JavaScript): // ...
        # var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
        # var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
        # var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
        # var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
        # rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
        # 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
        # ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
        # ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
        # hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
        # var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
        # resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
        # join(''); `; // ...
        # Corresponds to the JSON property `minValueColor`
        # @return [Google::Apis::SheetsV4::Color]
        attr_accessor :min_value_color
      
        # A color value.
        # Corresponds to the JSON property `minValueColorStyle`
        # @return [Google::Apis::SheetsV4::ColorStyle]
        attr_accessor :min_value_color_style
      
        # Represents a color in the RGBA color space. This representation is designed
        # for simplicity of conversion to/from color representations in various
        # languages over compactness; for example, the fields of this representation can
        # be trivially provided to the constructor of "java.awt.Color" in Java; it can
        # also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
        # method in iOS; and, with just a little work, it can be easily formatted into a
        # CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
        # information about the absolute color space that should be used to interpret
        # the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
        # applications SHOULD assume the sRGB color space. Note: when color equality
        # needs to be decided, implementations, unless documented otherwise, will treat
        # two colors to be equal if all their red, green, blue and alpha values each
        # differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
        # public static java.awt.Color fromProto(Color protocolor) ` float alpha =
        # protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
        # java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
        # ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
        # float) color.getRed(); float green = (float) color.getGreen(); float blue = (
        # float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
        # = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
        # .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
        # ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
        # denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
        # Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
        # protocolor red]; float green = [protocolor green]; float blue = [protocolor
        # blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
        # alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
        # colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
        # UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
        # green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
        # alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
        # blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
        # [result autorelease]; return result; ` // ... Example (JavaScript): // ...
        # var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
        # var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
        # var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
        # var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
        # rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
        # 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
        # ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
        # ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
        # hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
        # var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
        # resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
        # join(''); `; // ...
        # Corresponds to the JSON property `noDataColor`
        # @return [Google::Apis::SheetsV4::Color]
        attr_accessor :no_data_color
      
        # A color value.
        # Corresponds to the JSON property `noDataColorStyle`
        # @return [Google::Apis::SheetsV4::ColorStyle]
        attr_accessor :no_data_color_style
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @max_value_color = args[:max_value_color] if args.key?(:max_value_color)
          @max_value_color_style = args[:max_value_color_style] if args.key?(:max_value_color_style)
          @mid_value_color = args[:mid_value_color] if args.key?(:mid_value_color)
          @mid_value_color_style = args[:mid_value_color_style] if args.key?(:mid_value_color_style)
          @min_value_color = args[:min_value_color] if args.key?(:min_value_color)
          @min_value_color_style = args[:min_value_color_style] if args.key?(:min_value_color_style)
          @no_data_color = args[:no_data_color] if args.key?(:no_data_color)
          @no_data_color_style = args[:no_data_color_style] if args.key?(:no_data_color_style)
        end
      end
      
      # A Treemap chart.
      class TreemapChartSpec
        include Google::Apis::Core::Hashable
      
        # The data included in a domain or series.
        # Corresponds to the JSON property `colorData`
        # @return [Google::Apis::SheetsV4::ChartData]
        attr_accessor :color_data
      
        # A color scale for a treemap chart.
        # Corresponds to the JSON property `colorScale`
        # @return [Google::Apis::SheetsV4::TreemapChartColorScale]
        attr_accessor :color_scale
      
        # Represents a color in the RGBA color space. This representation is designed
        # for simplicity of conversion to/from color representations in various
        # languages over compactness; for example, the fields of this representation can
        # be trivially provided to the constructor of "java.awt.Color" in Java; it can
        # also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
        # method in iOS; and, with just a little work, it can be easily formatted into a
        # CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
        # information about the absolute color space that should be used to interpret
        # the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
        # applications SHOULD assume the sRGB color space. Note: when color equality
        # needs to be decided, implementations, unless documented otherwise, will treat
        # two colors to be equal if all their red, green, blue and alpha values each
        # differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
        # public static java.awt.Color fromProto(Color protocolor) ` float alpha =
        # protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
        # java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
        # ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
        # float) color.getRed(); float green = (float) color.getGreen(); float blue = (
        # float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
        # = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
        # .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
        # ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
        # denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
        # Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
        # protocolor red]; float green = [protocolor green]; float blue = [protocolor
        # blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
        # alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
        # colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
        # UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
        # green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
        # alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
        # blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
        # [result autorelease]; return result; ` // ... Example (JavaScript): // ...
        # var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
        # var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
        # var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
        # var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
        # rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
        # 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
        # ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
        # ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
        # hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
        # var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
        # resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
        # join(''); `; // ...
        # Corresponds to the JSON property `headerColor`
        # @return [Google::Apis::SheetsV4::Color]
        attr_accessor :header_color
      
        # A color value.
        # Corresponds to the JSON property `headerColorStyle`
        # @return [Google::Apis::SheetsV4::ColorStyle]
        attr_accessor :header_color_style
      
        # True to hide tooltips.
        # Corresponds to the JSON property `hideTooltips`
        # @return [Boolean]
        attr_accessor :hide_tooltips
        alias_method :hide_tooltips?, :hide_tooltips
      
        # The number of additional data levels beyond the labeled levels to be shown on
        # the treemap chart. These levels are not interactive and are shown without
        # their labels. Defaults to 0 if not specified.
        # Corresponds to the JSON property `hintedLevels`
        # @return [Fixnum]
        attr_accessor :hinted_levels
      
        # The data included in a domain or series.
        # Corresponds to the JSON property `labels`
        # @return [Google::Apis::SheetsV4::ChartData]
        attr_accessor :labels
      
        # The number of data levels to show on the treemap chart. These levels are
        # interactive and are shown with their labels. Defaults to 2 if not specified.
        # Corresponds to the JSON property `levels`
        # @return [Fixnum]
        attr_accessor :levels
      
        # The maximum possible data value. Cells with values greater than this will have
        # the same color as cells with this value. If not specified, defaults to the
        # actual maximum value from color_data, or the maximum value from size_data if
        # color_data is not specified.
        # Corresponds to the JSON property `maxValue`
        # @return [Float]
        attr_accessor :max_value
      
        # The minimum possible data value. Cells with values less than this will have
        # the same color as cells with this value. If not specified, defaults to the
        # actual minimum value from color_data, or the minimum value from size_data if
        # color_data is not specified.
        # Corresponds to the JSON property `minValue`
        # @return [Float]
        attr_accessor :min_value
      
        # The data included in a domain or series.
        # Corresponds to the JSON property `parentLabels`
        # @return [Google::Apis::SheetsV4::ChartData]
        attr_accessor :parent_labels
      
        # The data included in a domain or series.
        # Corresponds to the JSON property `sizeData`
        # @return [Google::Apis::SheetsV4::ChartData]
        attr_accessor :size_data
      
        # The format of a run of text in a cell. Absent values indicate that the field
        # isn't specified.
        # Corresponds to the JSON property `textFormat`
        # @return [Google::Apis::SheetsV4::TextFormat]
        attr_accessor :text_format
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @color_data = args[:color_data] if args.key?(:color_data)
          @color_scale = args[:color_scale] if args.key?(:color_scale)
          @header_color = args[:header_color] if args.key?(:header_color)
          @header_color_style = args[:header_color_style] if args.key?(:header_color_style)
          @hide_tooltips = args[:hide_tooltips] if args.key?(:hide_tooltips)
          @hinted_levels = args[:hinted_levels] if args.key?(:hinted_levels)
          @labels = args[:labels] if args.key?(:labels)
          @levels = args[:levels] if args.key?(:levels)
          @max_value = args[:max_value] if args.key?(:max_value)
          @min_value = args[:min_value] if args.key?(:min_value)
          @parent_labels = args[:parent_labels] if args.key?(:parent_labels)
          @size_data = args[:size_data] if args.key?(:size_data)
          @text_format = args[:text_format] if args.key?(:text_format)
        end
      end
      
      # Trims the whitespace (such as spaces, tabs, or new lines) in every cell in the
      # specified range. This request removes all whitespace from the start and end of
      # each cell's text, and reduces any subsequence of remaining whitespace
      # characters to a single space. If the resulting trimmed text starts with a '+'
      # or '=' character, the text remains as a string value and isn't interpreted as
      # a formula.
      class TrimWhitespaceRequest
        include Google::Apis::Core::Hashable
      
        # A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
        # the start index is inclusive and the end index is exclusive -- [start_index,
        # end_index). Missing indexes indicate the range is unbounded on that side. For
        # example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
        # start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
        # 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
        # start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
        # sheet_id:0` The start index must always be less than or equal to the end index.
        # If the start index equals the end index, then the range is empty. Empty
        # ranges are typically not meaningful and are usually rendered in the UI as `#
        # REF!`.
        # Corresponds to the JSON property `range`
        # @return [Google::Apis::SheetsV4::GridRange]
        attr_accessor :range
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @range = args[:range] if args.key?(:range)
        end
      end
      
      # The result of trimming whitespace in cells.
      class TrimWhitespaceResponse
        include Google::Apis::Core::Hashable
      
        # The number of cells that were trimmed of whitespace.
        # Corresponds to the JSON property `cellsChangedCount`
        # @return [Fixnum]
        attr_accessor :cells_changed_count
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @cells_changed_count = args[:cells_changed_count] if args.key?(:cells_changed_count)
        end
      end
      
      # Unmerges cells in the given range.
      class UnmergeCellsRequest
        include Google::Apis::Core::Hashable
      
        # A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
        # the start index is inclusive and the end index is exclusive -- [start_index,
        # end_index). Missing indexes indicate the range is unbounded on that side. For
        # example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
        # start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
        # 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
        # start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
        # sheet_id:0` The start index must always be less than or equal to the end index.
        # If the start index equals the end index, then the range is empty. Empty
        # ranges are typically not meaningful and are usually rendered in the UI as `#
        # REF!`.
        # Corresponds to the JSON property `range`
        # @return [Google::Apis::SheetsV4::GridRange]
        attr_accessor :range
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @range = args[:range] if args.key?(:range)
        end
      end
      
      # Updates properties of the supplied banded range.
      class UpdateBandingRequest
        include Google::Apis::Core::Hashable
      
        # A banded (alternating colors) range in a sheet.
        # Corresponds to the JSON property `bandedRange`
        # @return [Google::Apis::SheetsV4::BandedRange]
        attr_accessor :banded_range
      
        # The fields that should be updated. At least one field must be specified. The
        # root `bandedRange` is implied and should not be specified. A single `"*"` can
        # be used as short-hand for listing every field.
        # Corresponds to the JSON property `fields`
        # @return [String]
        attr_accessor :fields
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @banded_range = args[:banded_range] if args.key?(:banded_range)
          @fields = args[:fields] if args.key?(:fields)
        end
      end
      
      # Updates the borders of a range. If a field is not set in the request, that
      # means the border remains as-is. For example, with two subsequent
      # UpdateBordersRequest: 1. range: A1:A5 `` top: RED, bottom: WHITE `` 2. range:
      # A1:A5 `` left: BLUE `` That would result in A1:A5 having a borders of `` top:
      # RED, bottom: WHITE, left: BLUE ``. If you want to clear a border, explicitly
      # set the style to NONE.
      class UpdateBordersRequest
        include Google::Apis::Core::Hashable
      
        # A border along a cell.
        # Corresponds to the JSON property `bottom`
        # @return [Google::Apis::SheetsV4::Border]
        attr_accessor :bottom
      
        # A border along a cell.
        # Corresponds to the JSON property `innerHorizontal`
        # @return [Google::Apis::SheetsV4::Border]
        attr_accessor :inner_horizontal
      
        # A border along a cell.
        # Corresponds to the JSON property `innerVertical`
        # @return [Google::Apis::SheetsV4::Border]
        attr_accessor :inner_vertical
      
        # A border along a cell.
        # Corresponds to the JSON property `left`
        # @return [Google::Apis::SheetsV4::Border]
        attr_accessor :left
      
        # A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
        # the start index is inclusive and the end index is exclusive -- [start_index,
        # end_index). Missing indexes indicate the range is unbounded on that side. For
        # example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
        # start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
        # 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
        # start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
        # sheet_id:0` The start index must always be less than or equal to the end index.
        # If the start index equals the end index, then the range is empty. Empty
        # ranges are typically not meaningful and are usually rendered in the UI as `#
        # REF!`.
        # Corresponds to the JSON property `range`
        # @return [Google::Apis::SheetsV4::GridRange]
        attr_accessor :range
      
        # A border along a cell.
        # Corresponds to the JSON property `right`
        # @return [Google::Apis::SheetsV4::Border]
        attr_accessor :right
      
        # A border along a cell.
        # Corresponds to the JSON property `top`
        # @return [Google::Apis::SheetsV4::Border]
        attr_accessor :top
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @bottom = args[:bottom] if args.key?(:bottom)
          @inner_horizontal = args[:inner_horizontal] if args.key?(:inner_horizontal)
          @inner_vertical = args[:inner_vertical] if args.key?(:inner_vertical)
          @left = args[:left] if args.key?(:left)
          @range = args[:range] if args.key?(:range)
          @right = args[:right] if args.key?(:right)
          @top = args[:top] if args.key?(:top)
        end
      end
      
      # Updates all cells in a range with new data.
      class UpdateCellsRequest
        include Google::Apis::Core::Hashable
      
        # The fields of CellData that should be updated. At least one field must be
        # specified. The root is the CellData; 'row.values.' should not be specified. A
        # single `"*"` can be used as short-hand for listing every field.
        # Corresponds to the JSON property `fields`
        # @return [String]
        attr_accessor :fields
      
        # A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
        # the start index is inclusive and the end index is exclusive -- [start_index,
        # end_index). Missing indexes indicate the range is unbounded on that side. For
        # example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
        # start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
        # 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
        # start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
        # start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
        # sheet_id:0` The start index must always be less than or equal to the end index.
        # If the start index equals the end index, then the range is empty. Empty
        # ranges are typically not meaningful and are usually rendered in the UI as `#
        # REF!`.
        # Corresponds to the JSON property `range`
        # @return [Google::Apis::SheetsV4::GridRange]
        attr_accessor :range
      
        # The data to write.
        # Corresponds to the JSON property `rows`
        # @return [Array<Google::Apis::SheetsV4::RowData>]
        attr_accessor :rows
      
        # A coordinate in a sheet. All indexes are zero-based.
        # Corresponds to the JSON property `start`
        # @return [Google::Apis::SheetsV4::GridCoordinate]
        attr_accessor :start
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @fields = args[:fields] if args.key?(:fields)
          @range = args[:range] if args.key?(:range)
          @rows = args[:rows] if args.key?(:rows)
          @start = args[:start] if args.key?(:start)
        end
      end
      
      # Updates a chart's specifications. (This does not move or resize a chart. To
      # move or resize a chart, use UpdateEmbeddedObjectPositionRequest.)
      class UpdateChartSpecRequest
        include Google::Apis::Core::Hashable
      
        # The ID of the chart to update.
        # Corresponds to the JSON property `chartId`
        # @return [Fixnum]
        attr_accessor :chart_id
      
        # The specifications of a chart.
        # Corresponds to the JSON property `spec`
        # @return [Google::Apis::SheetsV4::ChartSpec]
        attr_accessor :spec
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @chart_id = args[:chart_id] if args.key?(:chart_id)
          @spec = args[:spec] if args.key?(:spec)
        end
      end
      
      # Updates a conditional format rule at the given index, or moves a conditional
      # format rule to another index.
      class UpdateConditionalFormatRuleRequest
        include Google::Apis::Core::Hashable
      
        # The zero-based index of the rule that should be replaced or moved.
        # Corresponds to the JSON property `index`
        # @return [Fixnum]
        attr_accessor :index
      
        # The zero-based new index the rule should end up at.
        # Corresponds to the JSON property `newIndex`
        # @return [Fixnum]
        attr_accessor :new_index
      
        # A rule describing a conditional format.
        # Corresponds to the JSON property `rule`
        # @return [Google::Apis::SheetsV4::ConditionalFormatRule]
        attr_accessor :rule
      
        # The sheet of the rule to move. Required if new_index is set, unused otherwise.
        # Corresponds to the JSON property `sheetId`
        # @return [Fixnum]
        attr_accessor :sheet_id
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @index = args[:index] if args.key?(:index)
          @new_index = args[:new_index] if args.key?(:new_index)
          @rule = args[:rule] if args.key?(:rule)
          @sheet_id = args[:sheet_id] if args.key?(:sheet_id)
        end
      end
      
      # The result of updating a conditional format rule.
      class UpdateConditionalFormatRuleResponse
        include Google::Apis::Core::Hashable
      
        # The index of the new rule.
        # Corresponds to the JSON property `newIndex`
        # @return [Fixnum]
        attr_accessor :new_index
      
        # A rule describing a conditional format.
        # Corresponds to the JSON property `newRule`
        # @return [Google::Apis::SheetsV4::ConditionalFormatRule]
        attr_accessor :new_rule
      
        # The old index of the rule. Not set if a rule was replaced (because it is the
        # same as new_index).
        # Corresponds to the JSON property `oldIndex`
        # @return [Fixnum]
        attr_accessor :old_index
      
        # A rule describing a conditional format.
        # Corresponds to the JSON property `oldRule`
        # @return [Google::Apis::SheetsV4::ConditionalFormatRule]
        attr_accessor :old_rule
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @new_index = args[:new_index] if args.key?(:new_index)
          @new_rule = args[:new_rule] if args.key?(:new_rule)
          @old_index = args[:old_index] if args.key?(:old_index)
          @old_rule = args[:old_rule] if args.key?(:old_rule)
        end
      end
      
      # Updates a data source. After the data source is updated successfully, an
      # execution is triggered to refresh the associated DATA_SOURCE sheet to read
      # data from the updated data source. The request requires an additional `
      # bigquery.readonly` OAuth scope.
      class UpdateDataSourceRequest
        include Google::Apis::Core::Hashable
      
        # Information about an external data source in the spreadsheet.
        # Corresponds to the JSON property `dataSource`
        # @return [Google::Apis::SheetsV4::DataSource]
        attr_accessor :data_source
      
        # The fields that should be updated. At least one field must be specified. The
        # root `dataSource` is implied and should not be specified. A single `"*"` can
        # be used as short-hand for listing every field.
        # Corresponds to the JSON property `fields`
        # @return [String]
        attr_accessor :fields
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @data_source = args[:data_source] if args.key?(:data_source)
          @fields = args[:fields] if args.key?(:fields)
        end
      end
      
      # The response from updating data source.
      class UpdateDataSourceResponse
        include Google::Apis::Core::Hashable
      
        # The data execution status. A data execution is created to sync a data source
        # object with the latest data from a DataSource. It is usually scheduled to run
        # at background, you can check its state to tell if an execution completes There
        # are several scenarios where a data execution is triggered to run: * Adding a
        # data source creates an associated data source sheet as well as a data
        # execution to sync the data from the data source to the sheet. * Updating a
        # data source creates a data execution to refresh the associated data source
        # sheet similarly. * You can send refresh request to explicitly refresh one or
        # multiple data source objects.
        # Corresponds to the JSON property `dataExecutionStatus`
        # @return [Google::Apis::SheetsV4::DataExecutionStatus]
        attr_accessor :data_execution_status
      
        # Information about an external data source in the spreadsheet.
        # Corresponds to the JSON property `dataSource`
        # @return [Google::Apis::SheetsV4::DataSource]
        attr_accessor :data_source
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @data_execution_status = args[:data_execution_status] if args.key?(:data_execution_status)
          @data_source = args[:data_source] if args.key?(:data_source)
        end
      end
      
      # A request to update properties of developer metadata. Updates the properties
      # of the developer metadata selected by the filters to the values provided in
      # the DeveloperMetadata resource. Callers must specify the properties they wish
      # to update in the fields parameter, as well as specify at least one DataFilter
      # matching the metadata they wish to update.
      class UpdateDeveloperMetadataRequest
        include Google::Apis::Core::Hashable
      
        # The filters matching the developer metadata entries to update.
        # Corresponds to the JSON property `dataFilters`
        # @return [Array<Google::Apis::SheetsV4::DataFilter>]
        attr_accessor :data_filters
      
        # Developer metadata associated with a location or object in a spreadsheet.
        # Developer metadata may be used to associate arbitrary data with various parts
        # of a spreadsheet and will remain associated at those locations as they move
        # around and the spreadsheet is edited. For example, if developer metadata is
        # associated with row 5 and another row is then subsequently inserted above row
        # 5, that original metadata will still be associated with the row it was first
        # associated with (what is now row 6). If the associated object is deleted its
        # metadata is deleted too.
        # Corresponds to the JSON property `developerMetadata`
        # @return [Google::Apis::SheetsV4::DeveloperMetadata]
        attr_accessor :developer_metadata
      
        # The fields that should be updated. At least one field must be specified. The
        # root `developerMetadata` is implied and should not be specified. A single `"*"`
        # can be used as short-hand for listing every field.
        # Corresponds to the JSON property `fields`
        # @return [String]
        attr_accessor :fields
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @data_filters = args[:data_filters] if args.key?(:data_filters)
          @developer_metadata = args[:developer_metadata] if args.key?(:developer_metadata)
          @fields = args[:fields] if args.key?(:fields)
        end
      end
      
      # The response from updating developer metadata.
      class UpdateDeveloperMetadataResponse
        include Google::Apis::Core::Hashable
      
        # The updated developer metadata.
        # Corresponds to the JSON property `developerMetadata`
        # @return [Array<Google::Apis::SheetsV4::DeveloperMetadata>]
        attr_accessor :developer_metadata
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @developer_metadata = args[:developer_metadata] if args.key?(:developer_metadata)
        end
      end
      
      # Updates the state of the specified group.
      class UpdateDimensionGroupRequest
        include Google::Apis::Core::Hashable
      
        # A group over an interval of rows or columns on a sheet, which can contain or
        # be contained within other groups. A group can be collapsed or expanded as a
        # unit on the sheet.
        # Corresponds to the JSON property `dimensionGroup`
        # @return [Google::Apis::SheetsV4::DimensionGroup]
        attr_accessor :dimension_group
      
        # The fields that should be updated. At least one field must be specified. The
        # root `dimensionGroup` is implied and should not be specified. A single `"*"`
        # can be used as short-hand for listing every field.
        # Corresponds to the JSON property `fields`
        # @return [String]
        attr_accessor :fields
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @dimension_group = args[:dimension_group] if args.key?(:dimension_group)
          @fields = args[:fields] if args.key?(:fields)
        end
      end
      
      # Updates properties of dimensions within the specified range.
      class UpdateDimensionPropertiesRequest
        include Google::Apis::Core::Hashable
      
        # A range along a single dimension on a DATA_SOURCE sheet.
        # Corresponds to the JSON property `dataSourceSheetRange`
        # @return [Google::Apis::SheetsV4::DataSourceSheetDimensionRange]
        attr_accessor :data_source_sheet_range
      
        # The fields that should be updated. At least one field must be specified. The
        # root `properties` is implied and should not be specified. A single `"*"` can
        # be used as short-hand for listing every field.
        # Corresponds to the JSON property `fields`
        # @return [String]
        attr_accessor :fields
      
        # Properties about a dimension.
        # Corresponds to the JSON property `properties`
        # @return [Google::Apis::SheetsV4::DimensionProperties]
        attr_accessor :properties
      
        # A range along a single dimension on a sheet. All indexes are zero-based.
        # Indexes are half open: the start index is inclusive and the end index is
        # exclusive. Missing indexes indicate the range is unbounded on that side.
        # Corresponds to the JSON property `range`
        # @return [Google::Apis::SheetsV4::DimensionRange]
        attr_accessor :range
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @data_source_sheet_range = args[:data_source_sheet_range] if args.key?(:data_source_sheet_range)
          @fields = args[:fields] if args.key?(:fields)
          @properties = args[:properties] if args.key?(:properties)
          @range = args[:range] if args.key?(:range)
        end
      end
      
      # Updates an embedded object's border property.
      class UpdateEmbeddedObjectBorderRequest
        include Google::Apis::Core::Hashable
      
        # A border along an embedded object.
        # Corresponds to the JSON property `border`
        # @return [Google::Apis::SheetsV4::EmbeddedObjectBorder]
        attr_accessor :border
      
        # The fields that should be updated. At least one field must be specified. The
        # root `border` is implied and should not be specified. A single `"*"` can be
        # used as short-hand for listing every field.
        # Corresponds to the JSON property `fields`
        # @return [String]
        attr_accessor :fields
      
        # The ID of the embedded object to update.
        # Corresponds to the JSON property `objectId`
        # @return [Fixnum]
        attr_accessor :object_id_prop
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @border = args[:border] if args.key?(:border)
          @fields = args[:fields] if args.key?(:fields)
          @object_id_prop = args[:object_id_prop] if args.key?(:object_id_prop)
        end
      end
      
      # Update an embedded object's position (such as a moving or resizing a chart or
      # image).
      class UpdateEmbeddedObjectPositionRequest
        include Google::Apis::Core::Hashable
      
        # The fields of OverlayPosition that should be updated when setting a new
        # position. Used only if newPosition.overlayPosition is set, in which case at
        # least one field must be specified. The root `newPosition.overlayPosition` is
        # implied and should not be specified. A single `"*"` can be used as short-hand
        # for listing every field.
        # Corresponds to the JSON property `fields`
        # @return [String]
        attr_accessor :fields
      
        # The position of an embedded object such as a chart.
        # Corresponds to the JSON property `newPosition`
        # @return [Google::Apis::SheetsV4::EmbeddedObjectPosition]
        attr_accessor :new_position
      
        # The ID of the object to moved.
        # Corresponds to the JSON property `objectId`
        # @return [Fixnum]
        attr_accessor :object_id_prop
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @fields = args[:fields] if args.key?(:fields)
          @new_position = args[:new_position] if args.key?(:new_position)
          @object_id_prop = args[:object_id_prop] if args.key?(:object_id_prop)
        end
      end
      
      # The result of updating an embedded object's position.
      class UpdateEmbeddedObjectPositionResponse
        include Google::Apis::Core::Hashable
      
        # The position of an embedded object such as a chart.
        # Corresponds to the JSON property `position`
        # @return [Google::Apis::SheetsV4::EmbeddedObjectPosition]
        attr_accessor :position
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @position = args[:position] if args.key?(:position)
        end
      end
      
      # Updates properties of the filter view.
      class UpdateFilterViewRequest
        include Google::Apis::Core::Hashable
      
        # The fields that should be updated. At least one field must be specified. The
        # root `filter` is implied and should not be specified. A single `"*"` can be
        # used as short-hand for listing every field.
        # Corresponds to the JSON property `fields`
        # @return [String]
        attr_accessor :fields
      
        # A filter view.
        # Corresponds to the JSON property `filter`
        # @return [Google::Apis::SheetsV4::FilterView]
        attr_accessor :filter
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @fields = args[:fields] if args.key?(:fields)
          @filter = args[:filter] if args.key?(:filter)
        end
      end
      
      # Updates properties of the named range with the specified namedRangeId.
      class UpdateNamedRangeRequest
        include Google::Apis::Core::Hashable
      
        # The fields that should be updated. At least one field must be specified. The
        # root `namedRange` is implied and should not be specified. A single `"*"` can
        # be used as short-hand for listing every field.
        # Corresponds to the JSON property `fields`
        # @return [String]
        attr_accessor :fields
      
        # A named range.
        # Corresponds to the JSON property `namedRange`
        # @return [Google::Apis::SheetsV4::NamedRange]
        attr_accessor :named_range
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @fields = args[:fields] if args.key?(:fields)
          @named_range = args[:named_range] if args.key?(:named_range)
        end
      end
      
      # Updates an existing protected range with the specified protectedRangeId.
      class UpdateProtectedRangeRequest
        include Google::Apis::Core::Hashable
      
        # The fields that should be updated. At least one field must be specified. The
        # root `protectedRange` is implied and should not be specified. A single `"*"`
        # can be used as short-hand for listing every field.
        # Corresponds to the JSON property `fields`
        # @return [String]
        attr_accessor :fields
      
        # A protected range.
        # Corresponds to the JSON property `protectedRange`
        # @return [Google::Apis::SheetsV4::ProtectedRange]
        attr_accessor :protected_range
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @fields = args[:fields] if args.key?(:fields)
          @protected_range = args[:protected_range] if args.key?(:protected_range)
        end
      end
      
      # Updates properties of the sheet with the specified sheetId.
      class UpdateSheetPropertiesRequest
        include Google::Apis::Core::Hashable
      
        # The fields that should be updated. At least one field must be specified. The
        # root `properties` is implied and should not be specified. A single `"*"` can
        # be used as short-hand for listing every field.
        # Corresponds to the JSON property `fields`
        # @return [String]
        attr_accessor :fields
      
        # Properties of a sheet.
        # Corresponds to the JSON property `properties`
        # @return [Google::Apis::SheetsV4::SheetProperties]
        attr_accessor :properties
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @fields = args[:fields] if args.key?(:fields)
          @properties = args[:properties] if args.key?(:properties)
        end
      end
      
      # Updates a slicer's specifications. (This does not move or resize a slicer. To
      # move or resize a slicer use UpdateEmbeddedObjectPositionRequest.
      class UpdateSlicerSpecRequest
        include Google::Apis::Core::Hashable
      
        # The fields that should be updated. At least one field must be specified. The
        # root `SlicerSpec` is implied and should not be specified. A single "*"` can be
        # used as short-hand for listing every field.
        # Corresponds to the JSON property `fields`
        # @return [String]
        attr_accessor :fields
      
        # The id of the slicer to update.
        # Corresponds to the JSON property `slicerId`
        # @return [Fixnum]
        attr_accessor :slicer_id
      
        # The specifications of a slicer.
        # Corresponds to the JSON property `spec`
        # @return [Google::Apis::SheetsV4::SlicerSpec]
        attr_accessor :spec
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @fields = args[:fields] if args.key?(:fields)
          @slicer_id = args[:slicer_id] if args.key?(:slicer_id)
          @spec = args[:spec] if args.key?(:spec)
        end
      end
      
      # Updates properties of a spreadsheet.
      class UpdateSpreadsheetPropertiesRequest
        include Google::Apis::Core::Hashable
      
        # The fields that should be updated. At least one field must be specified. The
        # root 'properties' is implied and should not be specified. A single `"*"` can
        # be used as short-hand for listing every field.
        # Corresponds to the JSON property `fields`
        # @return [String]
        attr_accessor :fields
      
        # Properties of a spreadsheet.
        # Corresponds to the JSON property `properties`
        # @return [Google::Apis::SheetsV4::SpreadsheetProperties]
        attr_accessor :properties
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @fields = args[:fields] if args.key?(:fields)
          @properties = args[:properties] if args.key?(:properties)
        end
      end
      
      # The response when updating a range of values by a data filter in a spreadsheet.
      class UpdateValuesByDataFilterResponse
        include Google::Apis::Core::Hashable
      
        # Filter that describes what data should be selected or returned from a request.
        # Corresponds to the JSON property `dataFilter`
        # @return [Google::Apis::SheetsV4::DataFilter]
        attr_accessor :data_filter
      
        # The number of cells updated.
        # Corresponds to the JSON property `updatedCells`
        # @return [Fixnum]
        attr_accessor :updated_cells
      
        # The number of columns where at least one cell in the column was updated.
        # Corresponds to the JSON property `updatedColumns`
        # @return [Fixnum]
        attr_accessor :updated_columns
      
        # Data within a range of the spreadsheet.
        # Corresponds to the JSON property `updatedData`
        # @return [Google::Apis::SheetsV4::ValueRange]
        attr_accessor :updated_data
      
        # The range (in A1 notation) that updates were applied to.
        # Corresponds to the JSON property `updatedRange`
        # @return [String]
        attr_accessor :updated_range
      
        # The number of rows where at least one cell in the row was updated.
        # Corresponds to the JSON property `updatedRows`
        # @return [Fixnum]
        attr_accessor :updated_rows
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @data_filter = args[:data_filter] if args.key?(:data_filter)
          @updated_cells = args[:updated_cells] if args.key?(:updated_cells)
          @updated_columns = args[:updated_columns] if args.key?(:updated_columns)
          @updated_data = args[:updated_data] if args.key?(:updated_data)
          @updated_range = args[:updated_range] if args.key?(:updated_range)
          @updated_rows = args[:updated_rows] if args.key?(:updated_rows)
        end
      end
      
      # The response when updating a range of values in a spreadsheet.
      class UpdateValuesResponse
        include Google::Apis::Core::Hashable
      
        # The spreadsheet the updates were applied to.
        # Corresponds to the JSON property `spreadsheetId`
        # @return [String]
        attr_accessor :spreadsheet_id
      
        # The number of cells updated.
        # Corresponds to the JSON property `updatedCells`
        # @return [Fixnum]
        attr_accessor :updated_cells
      
        # The number of columns where at least one cell in the column was updated.
        # Corresponds to the JSON property `updatedColumns`
        # @return [Fixnum]
        attr_accessor :updated_columns
      
        # Data within a range of the spreadsheet.
        # Corresponds to the JSON property `updatedData`
        # @return [Google::Apis::SheetsV4::ValueRange]
        attr_accessor :updated_data
      
        # The range (in A1 notation) that updates were applied to.
        # Corresponds to the JSON property `updatedRange`
        # @return [String]
        attr_accessor :updated_range
      
        # The number of rows where at least one cell in the row was updated.
        # Corresponds to the JSON property `updatedRows`
        # @return [Fixnum]
        attr_accessor :updated_rows
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @spreadsheet_id = args[:spreadsheet_id] if args.key?(:spreadsheet_id)
          @updated_cells = args[:updated_cells] if args.key?(:updated_cells)
          @updated_columns = args[:updated_columns] if args.key?(:updated_columns)
          @updated_data = args[:updated_data] if args.key?(:updated_data)
          @updated_range = args[:updated_range] if args.key?(:updated_range)
          @updated_rows = args[:updated_rows] if args.key?(:updated_rows)
        end
      end
      
      # Data within a range of the spreadsheet.
      class ValueRange
        include Google::Apis::Core::Hashable
      
        # The major dimension of the values. For output, if the spreadsheet data is: `A1=
        # 1,B1=2,A2=3,B2=4`, then requesting `range=A1:B2,majorDimension=ROWS` will
        # return `[[1,2],[3,4]]`, whereas requesting `range=A1:B2,majorDimension=COLUMNS`
        # will return `[[1,3],[2,4]]`. For input, with `range=A1:B2,majorDimension=ROWS`
        # then `[[1,2],[3,4]]` will set `A1=1,B1=2,A2=3,B2=4`. With `range=A1:B2,
        # majorDimension=COLUMNS` then `[[1,2],[3,4]]` will set `A1=1,B1=3,A2=2,B2=4`.
        # When writing, if this field is not set, it defaults to ROWS.
        # Corresponds to the JSON property `majorDimension`
        # @return [String]
        attr_accessor :major_dimension
      
        # The range the values cover, in A1 notation. For output, this range indicates
        # the entire requested range, even though the values will exclude trailing rows
        # and columns. When appending values, this field represents the range to search
        # for a table, after which values will be appended.
        # Corresponds to the JSON property `range`
        # @return [String]
        attr_accessor :range
      
        # The data that was read or to be written. This is an array of arrays, the outer
        # array representing all the data and each inner array representing a major
        # dimension. Each item in the inner array corresponds with one cell. For output,
        # empty trailing rows and columns will not be included. For input, supported
        # value types are: bool, string, and double. Null values will be skipped. To set
        # a cell to an empty value, set the string value to an empty string.
        # Corresponds to the JSON property `values`
        # @return [Array<Array<Object>>]
        attr_accessor :values
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @major_dimension = args[:major_dimension] if args.key?(:major_dimension)
          @range = args[:range] if args.key?(:range)
          @values = args[:values] if args.key?(:values)
        end
      end
      
      # Styles for a waterfall chart column.
      class WaterfallChartColumnStyle
        include Google::Apis::Core::Hashable
      
        # Represents a color in the RGBA color space. This representation is designed
        # for simplicity of conversion to/from color representations in various
        # languages over compactness; for example, the fields of this representation can
        # be trivially provided to the constructor of "java.awt.Color" in Java; it can
        # also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
        # method in iOS; and, with just a little work, it can be easily formatted into a
        # CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
        # information about the absolute color space that should be used to interpret
        # the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
        # applications SHOULD assume the sRGB color space. Note: when color equality
        # needs to be decided, implementations, unless documented otherwise, will treat
        # two colors to be equal if all their red, green, blue and alpha values each
        # differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
        # public static java.awt.Color fromProto(Color protocolor) ` float alpha =
        # protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
        # java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
        # ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
        # float) color.getRed(); float green = (float) color.getGreen(); float blue = (
        # float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
        # = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
        # .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
        # ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
        # denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
        # Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
        # protocolor red]; float green = [protocolor green]; float blue = [protocolor
        # blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
        # alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
        # colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
        # UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
        # green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
        # alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
        # blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
        # [result autorelease]; return result; ` // ... Example (JavaScript): // ...
        # var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
        # var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
        # var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
        # var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
        # rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
        # 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
        # ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
        # ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
        # hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
        # var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
        # resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
        # join(''); `; // ...
        # Corresponds to the JSON property `color`
        # @return [Google::Apis::SheetsV4::Color]
        attr_accessor :color
      
        # A color value.
        # Corresponds to the JSON property `colorStyle`
        # @return [Google::Apis::SheetsV4::ColorStyle]
        attr_accessor :color_style
      
        # The label of the column's legend.
        # Corresponds to the JSON property `label`
        # @return [String]
        attr_accessor :label
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @color = args[:color] if args.key?(:color)
          @color_style = args[:color_style] if args.key?(:color_style)
          @label = args[:label] if args.key?(:label)
        end
      end
      
      # A custom subtotal column for a waterfall chart series.
      class WaterfallChartCustomSubtotal
        include Google::Apis::Core::Hashable
      
        # True if the data point at subtotal_index is the subtotal. If false, the
        # subtotal will be computed and appear after the data point.
        # Corresponds to the JSON property `dataIsSubtotal`
        # @return [Boolean]
        attr_accessor :data_is_subtotal
        alias_method :data_is_subtotal?, :data_is_subtotal
      
        # A label for the subtotal column.
        # Corresponds to the JSON property `label`
        # @return [String]
        attr_accessor :label
      
        # The 0-based index of a data point within the series. If data_is_subtotal is
        # true, the data point at this index is the subtotal. Otherwise, the subtotal
        # appears after the data point with this index. A series can have multiple
        # subtotals at arbitrary indices, but subtotals do not affect the indices of the
        # data points. For example, if a series has three data points, their indices
        # will always be 0, 1, and 2, regardless of how many subtotals exist on the
        # series or what data points they are associated with.
        # Corresponds to the JSON property `subtotalIndex`
        # @return [Fixnum]
        attr_accessor :subtotal_index
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @data_is_subtotal = args[:data_is_subtotal] if args.key?(:data_is_subtotal)
          @label = args[:label] if args.key?(:label)
          @subtotal_index = args[:subtotal_index] if args.key?(:subtotal_index)
        end
      end
      
      # The domain of a waterfall chart.
      class WaterfallChartDomain
        include Google::Apis::Core::Hashable
      
        # The data included in a domain or series.
        # Corresponds to the JSON property `data`
        # @return [Google::Apis::SheetsV4::ChartData]
        attr_accessor :data
      
        # True to reverse the order of the domain values (horizontal axis).
        # Corresponds to the JSON property `reversed`
        # @return [Boolean]
        attr_accessor :reversed
        alias_method :reversed?, :reversed
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @data = args[:data] if args.key?(:data)
          @reversed = args[:reversed] if args.key?(:reversed)
        end
      end
      
      # A single series of data for a waterfall chart.
      class WaterfallChartSeries
        include Google::Apis::Core::Hashable
      
        # Custom subtotal columns appearing in this series. The order in which subtotals
        # are defined is not significant. Only one subtotal may be defined for each data
        # point.
        # Corresponds to the JSON property `customSubtotals`
        # @return [Array<Google::Apis::SheetsV4::WaterfallChartCustomSubtotal>]
        attr_accessor :custom_subtotals
      
        # The data included in a domain or series.
        # Corresponds to the JSON property `data`
        # @return [Google::Apis::SheetsV4::ChartData]
        attr_accessor :data
      
        # Settings for one set of data labels. Data labels are annotations that appear
        # next to a set of data, such as the points on a line chart, and provide
        # additional information about what the data represents, such as a text
        # representation of the value behind that point on the graph.
        # Corresponds to the JSON property `dataLabel`
        # @return [Google::Apis::SheetsV4::DataLabel]
        attr_accessor :data_label
      
        # True to hide the subtotal column from the end of the series. By default, a
        # subtotal column will appear at the end of each series. Setting this field to
        # true will hide that subtotal column for this series.
        # Corresponds to the JSON property `hideTrailingSubtotal`
        # @return [Boolean]
        attr_accessor :hide_trailing_subtotal
        alias_method :hide_trailing_subtotal?, :hide_trailing_subtotal
      
        # Styles for a waterfall chart column.
        # Corresponds to the JSON property `negativeColumnsStyle`
        # @return [Google::Apis::SheetsV4::WaterfallChartColumnStyle]
        attr_accessor :negative_columns_style
      
        # Styles for a waterfall chart column.
        # Corresponds to the JSON property `positiveColumnsStyle`
        # @return [Google::Apis::SheetsV4::WaterfallChartColumnStyle]
        attr_accessor :positive_columns_style
      
        # Styles for a waterfall chart column.
        # Corresponds to the JSON property `subtotalColumnsStyle`
        # @return [Google::Apis::SheetsV4::WaterfallChartColumnStyle]
        attr_accessor :subtotal_columns_style
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @custom_subtotals = args[:custom_subtotals] if args.key?(:custom_subtotals)
          @data = args[:data] if args.key?(:data)
          @data_label = args[:data_label] if args.key?(:data_label)
          @hide_trailing_subtotal = args[:hide_trailing_subtotal] if args.key?(:hide_trailing_subtotal)
          @negative_columns_style = args[:negative_columns_style] if args.key?(:negative_columns_style)
          @positive_columns_style = args[:positive_columns_style] if args.key?(:positive_columns_style)
          @subtotal_columns_style = args[:subtotal_columns_style] if args.key?(:subtotal_columns_style)
        end
      end
      
      # A waterfall chart.
      class WaterfallChartSpec
        include Google::Apis::Core::Hashable
      
        # Properties that describe the style of a line.
        # Corresponds to the JSON property `connectorLineStyle`
        # @return [Google::Apis::SheetsV4::LineStyle]
        attr_accessor :connector_line_style
      
        # The domain of a waterfall chart.
        # Corresponds to the JSON property `domain`
        # @return [Google::Apis::SheetsV4::WaterfallChartDomain]
        attr_accessor :domain
      
        # True to interpret the first value as a total.
        # Corresponds to the JSON property `firstValueIsTotal`
        # @return [Boolean]
        attr_accessor :first_value_is_total
        alias_method :first_value_is_total?, :first_value_is_total
      
        # True to hide connector lines between columns.
        # Corresponds to the JSON property `hideConnectorLines`
        # @return [Boolean]
        attr_accessor :hide_connector_lines
        alias_method :hide_connector_lines?, :hide_connector_lines
      
        # The data this waterfall chart is visualizing.
        # Corresponds to the JSON property `series`
        # @return [Array<Google::Apis::SheetsV4::WaterfallChartSeries>]
        attr_accessor :series
      
        # The stacked type.
        # Corresponds to the JSON property `stackedType`
        # @return [String]
        attr_accessor :stacked_type
      
        # Settings for one set of data labels. Data labels are annotations that appear
        # next to a set of data, such as the points on a line chart, and provide
        # additional information about what the data represents, such as a text
        # representation of the value behind that point on the graph.
        # Corresponds to the JSON property `totalDataLabel`
        # @return [Google::Apis::SheetsV4::DataLabel]
        attr_accessor :total_data_label
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @connector_line_style = args[:connector_line_style] if args.key?(:connector_line_style)
          @domain = args[:domain] if args.key?(:domain)
          @first_value_is_total = args[:first_value_is_total] if args.key?(:first_value_is_total)
          @hide_connector_lines = args[:hide_connector_lines] if args.key?(:hide_connector_lines)
          @series = args[:series] if args.key?(:series)
          @stacked_type = args[:stacked_type] if args.key?(:stacked_type)
          @total_data_label = args[:total_data_label] if args.key?(:total_data_label)
        end
      end
    end
  end
end