# Copyright 2015 Google Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

require 'date'
require 'google/apis/core/base_service'
require 'google/apis/core/json_representation'
require 'google/apis/core/hashable'
require 'google/apis/errors'

module Google
  module Apis
    module ServicenetworkingV1beta
      
      # Request to create a subnetwork in a previously peered service network.
      class AddSubnetworkRequest
        include Google::Apis::Core::Hashable
      
        # Required. A resource that represents the service consumer, such as
        # `projects/123456`. The project number can be different from the
        # value in the consumer network parameter. For example, the network might be
        # part of a Shared VPC network. In those cases, Service Networking validates
        # that this resource belongs to that Shared VPC.
        # Corresponds to the JSON property `consumer`
        # @return [String]
        attr_accessor :consumer
      
        # Required. The name of the service consumer's VPC network. The network
        # must have an existing private connection that was provisioned through the
        # connections.create method. The name must be in the following format:
        # `projects/`project`/global/networks/`network``, where `project`
        # is a project number, such as `12345`. `network` is the name of a
        # VPC network in the project.
        # Corresponds to the JSON property `consumerNetwork`
        # @return [String]
        attr_accessor :consumer_network
      
        # An optional description of the subnet.
        # Corresponds to the JSON property `description`
        # @return [String]
        attr_accessor :description
      
        # Required. The prefix length of the subnet's IP address range.  Use CIDR
        # range notation, such as `30` to provision a subnet with an
        # `x.x.x.x/30` CIDR range. The IP address range is drawn from a
        # pool of available ranges in the service consumer's allocated range.
        # Corresponds to the JSON property `ipPrefixLength`
        # @return [Fixnum]
        attr_accessor :ip_prefix_length
      
        # Required. The name of a [region](/compute/docs/regions-zones)
        # for the subnet, such `europe-west1`.
        # Corresponds to the JSON property `region`
        # @return [String]
        attr_accessor :region
      
        # Optional. The starting address of a range. The address must be a valid
        # IPv4 address in the x.x.x.x format. This value combined with the IP prefix
        # range is the CIDR range for the subnet. The range must be within the
        # allocated range that is assigned to the private connection. If the CIDR
        # range isn't available, the call fails.
        # Corresponds to the JSON property `requestedAddress`
        # @return [String]
        attr_accessor :requested_address
      
        # Required. A name for the new subnet. For information about the naming
        # requirements, see [subnetwork](/compute/docs/reference/rest/v1/subnetworks)
        # in the Compute API documentation.
        # Corresponds to the JSON property `subnetwork`
        # @return [String]
        attr_accessor :subnetwork
      
        # A list of members that are granted the `compute.networkUser`
        # role on the subnet.
        # Corresponds to the JSON property `subnetworkUsers`
        # @return [Array<String>]
        attr_accessor :subnetwork_users
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @consumer = args[:consumer] if args.key?(:consumer)
          @consumer_network = args[:consumer_network] if args.key?(:consumer_network)
          @description = args[:description] if args.key?(:description)
          @ip_prefix_length = args[:ip_prefix_length] if args.key?(:ip_prefix_length)
          @region = args[:region] if args.key?(:region)
          @requested_address = args[:requested_address] if args.key?(:requested_address)
          @subnetwork = args[:subnetwork] if args.key?(:subnetwork)
          @subnetwork_users = args[:subnetwork_users] if args.key?(:subnetwork_users)
        end
      end
      
      # Api is a light-weight descriptor for an API Interface.
      # Interfaces are also described as "protocol buffer services" in some contexts,
      # such as by the "service" keyword in a .proto file, but they are different
      # from API Services, which represent a concrete implementation of an interface
      # as opposed to simply a description of methods and bindings. They are also
      # sometimes simply referred to as "APIs" in other contexts, such as the name of
      # this message itself. See https://cloud.google.com/apis/design/glossary for
      # detailed terminology.
      class Api
        include Google::Apis::Core::Hashable
      
        # The methods of this interface, in unspecified order.
        # Corresponds to the JSON property `methods`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::MethodProp>]
        attr_accessor :methods_prop
      
        # Included interfaces. See Mixin.
        # Corresponds to the JSON property `mixins`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::Mixin>]
        attr_accessor :mixins
      
        # The fully qualified name of this interface, including package name
        # followed by the interface's simple name.
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # Any metadata attached to the interface.
        # Corresponds to the JSON property `options`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::Option>]
        attr_accessor :options
      
        # `SourceContext` represents information about the source of a
        # protobuf element, like the file in which it is defined.
        # Corresponds to the JSON property `sourceContext`
        # @return [Google::Apis::ServicenetworkingV1beta::SourceContext]
        attr_accessor :source_context
      
        # The source syntax of the service.
        # Corresponds to the JSON property `syntax`
        # @return [String]
        attr_accessor :syntax
      
        # A version string for this interface. If specified, must have the form
        # `major-version.minor-version`, as in `1.10`. If the minor version is
        # omitted, it defaults to zero. If the entire version field is empty, the
        # major version is derived from the package name, as outlined below. If the
        # field is not empty, the version in the package name will be verified to be
        # consistent with what is provided here.
        # The versioning schema uses [semantic
        # versioning](http://semver.org) where the major version number
        # indicates a breaking change and the minor version an additive,
        # non-breaking change. Both version numbers are signals to users
        # what to expect from different versions, and should be carefully
        # chosen based on the product plan.
        # The major version is also reflected in the package name of the
        # interface, which must end in `v<major-version>`, as in
        # `google.feature.v1`. For major versions 0 and 1, the suffix can
        # be omitted. Zero major versions must only be used for
        # experimental, non-GA interfaces.
        # Corresponds to the JSON property `version`
        # @return [String]
        attr_accessor :version
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @methods_prop = args[:methods_prop] if args.key?(:methods_prop)
          @mixins = args[:mixins] if args.key?(:mixins)
          @name = args[:name] if args.key?(:name)
          @options = args[:options] if args.key?(:options)
          @source_context = args[:source_context] if args.key?(:source_context)
          @syntax = args[:syntax] if args.key?(:syntax)
          @version = args[:version] if args.key?(:version)
        end
      end
      
      # Configuration for an authentication provider, including support for
      # [JSON Web Token
      # (JWT)](https://tools.ietf.org/html/draft-ietf-oauth-json-web-token-32).
      class AuthProvider
        include Google::Apis::Core::Hashable
      
        # The list of JWT
        # [audiences](https://tools.ietf.org/html/draft-ietf-oauth-json-web-token-32#
        # section-4.1.3).
        # that are allowed to access. A JWT containing any of these audiences will
        # be accepted. When this setting is absent, only JWTs with audience
        # "https://Service_name/API_name"
        # will be accepted. For example, if no audiences are in the setting,
        # LibraryService API will only accept JWTs with the following audience
        # "https://library-example.googleapis.com/google.example.library.v1.
        # LibraryService".
        # Example:
        # audiences: bookstore_android.apps.googleusercontent.com,
        # bookstore_web.apps.googleusercontent.com
        # Corresponds to the JSON property `audiences`
        # @return [String]
        attr_accessor :audiences
      
        # Redirect URL if JWT token is required but not present or is expired.
        # Implement authorizationUrl of securityDefinitions in OpenAPI spec.
        # Corresponds to the JSON property `authorizationUrl`
        # @return [String]
        attr_accessor :authorization_url
      
        # The unique identifier of the auth provider. It will be referred to by
        # `AuthRequirement.provider_id`.
        # Example: "bookstore_auth".
        # Corresponds to the JSON property `id`
        # @return [String]
        attr_accessor :id
      
        # Identifies the principal that issued the JWT. See
        # https://tools.ietf.org/html/draft-ietf-oauth-json-web-token-32#section-4.1.1
        # Usually a URL or an email address.
        # Example: https://securetoken.google.com
        # Example: 1234567-compute@developer.gserviceaccount.com
        # Corresponds to the JSON property `issuer`
        # @return [String]
        attr_accessor :issuer
      
        # URL of the provider's public key set to validate signature of the JWT. See
        # [OpenID
        # Discovery](https://openid.net/specs/openid-connect-discovery-1_0.html#
        # ProviderMetadata).
        # Optional if the key set document:
        # - can be retrieved from
        # [OpenID
        # Discovery](https://openid.net/specs/openid-connect-discovery-1_0.html of
        # the issuer.
        # - can be inferred from the email domain of the issuer (e.g. a Google
        # service account).
        # Example: https://www.googleapis.com/oauth2/v1/certs
        # Corresponds to the JSON property `jwksUri`
        # @return [String]
        attr_accessor :jwks_uri
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @audiences = args[:audiences] if args.key?(:audiences)
          @authorization_url = args[:authorization_url] if args.key?(:authorization_url)
          @id = args[:id] if args.key?(:id)
          @issuer = args[:issuer] if args.key?(:issuer)
          @jwks_uri = args[:jwks_uri] if args.key?(:jwks_uri)
        end
      end
      
      # User-defined authentication requirements, including support for
      # [JSON Web Token
      # (JWT)](https://tools.ietf.org/html/draft-ietf-oauth-json-web-token-32).
      class AuthRequirement
        include Google::Apis::Core::Hashable
      
        # NOTE: This will be deprecated soon, once AuthProvider.audiences is
        # implemented and accepted in all the runtime components.
        # The list of JWT
        # [audiences](https://tools.ietf.org/html/draft-ietf-oauth-json-web-token-32#
        # section-4.1.3).
        # that are allowed to access. A JWT containing any of these audiences will
        # be accepted. When this setting is absent, only JWTs with audience
        # "https://Service_name/API_name"
        # will be accepted. For example, if no audiences are in the setting,
        # LibraryService API will only accept JWTs with the following audience
        # "https://library-example.googleapis.com/google.example.library.v1.
        # LibraryService".
        # Example:
        # audiences: bookstore_android.apps.googleusercontent.com,
        # bookstore_web.apps.googleusercontent.com
        # Corresponds to the JSON property `audiences`
        # @return [String]
        attr_accessor :audiences
      
        # id from authentication provider.
        # Example:
        # provider_id: bookstore_auth
        # Corresponds to the JSON property `providerId`
        # @return [String]
        attr_accessor :provider_id
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @audiences = args[:audiences] if args.key?(:audiences)
          @provider_id = args[:provider_id] if args.key?(:provider_id)
        end
      end
      
      # `Authentication` defines the authentication configuration for an API.
      # Example for an API targeted for external use:
      # name: calendar.googleapis.com
      # authentication:
      # providers:
      # - id: google_calendar_auth
      # jwks_uri: https://www.googleapis.com/oauth2/v1/certs
      # issuer: https://securetoken.google.com
      # rules:
      # - selector: "*"
      # requirements:
      # provider_id: google_calendar_auth
      class Authentication
        include Google::Apis::Core::Hashable
      
        # Defines a set of authentication providers that a service supports.
        # Corresponds to the JSON property `providers`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::AuthProvider>]
        attr_accessor :providers
      
        # A list of authentication rules that apply to individual API methods.
        # **NOTE:** All service configuration rules follow "last one wins" order.
        # Corresponds to the JSON property `rules`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::AuthenticationRule>]
        attr_accessor :rules
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @providers = args[:providers] if args.key?(:providers)
          @rules = args[:rules] if args.key?(:rules)
        end
      end
      
      # Authentication rules for the service.
      # By default, if a method has any authentication requirements, every request
      # must include a valid credential matching one of the requirements.
      # It's an error to include more than one kind of credential in a single
      # request.
      # If a method doesn't have any auth requirements, request credentials will be
      # ignored.
      class AuthenticationRule
        include Google::Apis::Core::Hashable
      
        # If true, the service accepts API keys without any other credential.
        # Corresponds to the JSON property `allowWithoutCredential`
        # @return [Boolean]
        attr_accessor :allow_without_credential
        alias_method :allow_without_credential?, :allow_without_credential
      
        # OAuth scopes are a way to define data and permissions on data. For example,
        # there are scopes defined for "Read-only access to Google Calendar" and
        # "Access to Cloud Platform". Users can consent to a scope for an application,
        # giving it permission to access that data on their behalf.
        # OAuth scope specifications should be fairly coarse grained; a user will need
        # to see and understand the text description of what your scope means.
        # In most cases: use one or at most two OAuth scopes for an entire family of
        # products. If your product has multiple APIs, you should probably be sharing
        # the OAuth scope across all of those APIs.
        # When you need finer grained OAuth consent screens: talk with your product
        # management about how developers will use them in practice.
        # Please note that even though each of the canonical scopes is enough for a
        # request to be accepted and passed to the backend, a request can still fail
        # due to the backend requiring additional scopes or permissions.
        # Corresponds to the JSON property `oauth`
        # @return [Google::Apis::ServicenetworkingV1beta::OAuthRequirements]
        attr_accessor :oauth
      
        # Requirements for additional authentication providers.
        # Corresponds to the JSON property `requirements`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::AuthRequirement>]
        attr_accessor :requirements
      
        # Selects the methods to which this rule applies.
        # Refer to selector for syntax details.
        # Corresponds to the JSON property `selector`
        # @return [String]
        attr_accessor :selector
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @allow_without_credential = args[:allow_without_credential] if args.key?(:allow_without_credential)
          @oauth = args[:oauth] if args.key?(:oauth)
          @requirements = args[:requirements] if args.key?(:requirements)
          @selector = args[:selector] if args.key?(:selector)
        end
      end
      
      # `Backend` defines the backend configuration for a service.
      class Backend
        include Google::Apis::Core::Hashable
      
        # A list of API backend rules that apply to individual API methods.
        # **NOTE:** All service configuration rules follow "last one wins" order.
        # Corresponds to the JSON property `rules`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::BackendRule>]
        attr_accessor :rules
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @rules = args[:rules] if args.key?(:rules)
        end
      end
      
      # A backend rule provides configuration for an individual API element.
      class BackendRule
        include Google::Apis::Core::Hashable
      
        # The address of the API backend.
        # Corresponds to the JSON property `address`
        # @return [String]
        attr_accessor :address
      
        # The number of seconds to wait for a response from a request.  The default
        # deadline for gRPC is infinite (no deadline) and HTTP requests is 5 seconds.
        # Corresponds to the JSON property `deadline`
        # @return [Float]
        attr_accessor :deadline
      
        # When disable_auth is false,  a JWT ID token will be generated with the
        # value from BackendRule.address as jwt_audience, overrode to the HTTP
        # "Authorization" request header and sent to the backend.
        # When disable_auth is true, a JWT ID token won't be generated and the
        # original "Authorization" HTTP header will be preserved. If the header is
        # used to carry the original token and is expected by the backend, this
        # field must be set to true to preserve the header.
        # Corresponds to the JSON property `disableAuth`
        # @return [Boolean]
        attr_accessor :disable_auth
        alias_method :disable_auth?, :disable_auth
      
        # The JWT audience is used when generating a JWT ID token for the backend.
        # This ID token will be added in the HTTP "authorization" header, and sent
        # to the backend.
        # Corresponds to the JSON property `jwtAudience`
        # @return [String]
        attr_accessor :jwt_audience
      
        # Minimum deadline in seconds needed for this method. Calls having deadline
        # value lower than this will be rejected.
        # Corresponds to the JSON property `minDeadline`
        # @return [Float]
        attr_accessor :min_deadline
      
        # The number of seconds to wait for the completion of a long running
        # operation. The default is no deadline.
        # Corresponds to the JSON property `operationDeadline`
        # @return [Float]
        attr_accessor :operation_deadline
      
        # 
        # Corresponds to the JSON property `pathTranslation`
        # @return [String]
        attr_accessor :path_translation
      
        # Selects the methods to which this rule applies.
        # Refer to selector for syntax details.
        # Corresponds to the JSON property `selector`
        # @return [String]
        attr_accessor :selector
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @address = args[:address] if args.key?(:address)
          @deadline = args[:deadline] if args.key?(:deadline)
          @disable_auth = args[:disable_auth] if args.key?(:disable_auth)
          @jwt_audience = args[:jwt_audience] if args.key?(:jwt_audience)
          @min_deadline = args[:min_deadline] if args.key?(:min_deadline)
          @operation_deadline = args[:operation_deadline] if args.key?(:operation_deadline)
          @path_translation = args[:path_translation] if args.key?(:path_translation)
          @selector = args[:selector] if args.key?(:selector)
        end
      end
      
      # Billing related configuration of the service.
      # The following example shows how to configure monitored resources and metrics
      # for billing:
      # monitored_resources:
      # - type: library.googleapis.com/branch
      # labels:
      # - key: /city
      # description: The city where the library branch is located in.
      # - key: /name
      # description: The name of the branch.
      # metrics:
      # - name: library.googleapis.com/book/borrowed_count
      # metric_kind: DELTA
      # value_type: INT64
      # billing:
      # consumer_destinations:
      # - monitored_resource: library.googleapis.com/branch
      # metrics:
      # - library.googleapis.com/book/borrowed_count
      class Billing
        include Google::Apis::Core::Hashable
      
        # Billing configurations for sending metrics to the consumer project.
        # There can be multiple consumer destinations per service, each one must have
        # a different monitored resource type. A metric can be used in at most
        # one consumer destination.
        # Corresponds to the JSON property `consumerDestinations`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::BillingDestination>]
        attr_accessor :consumer_destinations
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @consumer_destinations = args[:consumer_destinations] if args.key?(:consumer_destinations)
        end
      end
      
      # Configuration of a specific billing destination (Currently only support
      # bill against consumer project).
      class BillingDestination
        include Google::Apis::Core::Hashable
      
        # Names of the metrics to report to this billing destination.
        # Each name must be defined in Service.metrics section.
        # Corresponds to the JSON property `metrics`
        # @return [Array<String>]
        attr_accessor :metrics
      
        # The monitored resource type. The type must be defined in
        # Service.monitored_resources section.
        # Corresponds to the JSON property `monitoredResource`
        # @return [String]
        attr_accessor :monitored_resource
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @metrics = args[:metrics] if args.key?(:metrics)
          @monitored_resource = args[:monitored_resource] if args.key?(:monitored_resource)
        end
      end
      
      # Represents a private connection resource. A private connection is implemented
      # as a VPC Network Peering connection between a service producer's VPC network
      # and a service consumer's VPC network.
      class Connection
        include Google::Apis::Core::Hashable
      
        # The name of service consumer's VPC network that's connected with service
        # producer network, in the following format:
        # `projects/`project`/global/networks/`network``.
        # ``project`` is a project number, such as in `12345` that includes
        # the VPC service consumer's VPC network. ``network`` is the name of the
        # service consumer's VPC network.
        # Corresponds to the JSON property `network`
        # @return [String]
        attr_accessor :network
      
        # Output only. The name of the VPC Network Peering connection that was created
        # by the
        # service producer.
        # Corresponds to the JSON property `peering`
        # @return [String]
        attr_accessor :peering
      
        # The name of one or more allocated IP address ranges for this service
        # producer of type `PEERING`.
        # Note that invoking this method with a different range when connection is
        # already established will not modify already provisioned service
        # producer subnetworks.
        # Corresponds to the JSON property `reservedPeeringRanges`
        # @return [Array<String>]
        attr_accessor :reserved_peering_ranges
      
        # Output only. The name of the peering service that's associated with this
        # connection, in
        # the following format: `services/`service name``.
        # Corresponds to the JSON property `service`
        # @return [String]
        attr_accessor :service
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @network = args[:network] if args.key?(:network)
          @peering = args[:peering] if args.key?(:peering)
          @reserved_peering_ranges = args[:reserved_peering_ranges] if args.key?(:reserved_peering_ranges)
          @service = args[:service] if args.key?(:service)
        end
      end
      
      # `Context` defines which contexts an API requests.
      # Example:
      # context:
      # rules:
      # - selector: "*"
      # requested:
      # - google.rpc.context.ProjectContext
      # - google.rpc.context.OriginContext
      # The above specifies that all methods in the API request
      # `google.rpc.context.ProjectContext` and
      # `google.rpc.context.OriginContext`.
      # Available context types are defined in package
      # `google.rpc.context`.
      # This also provides mechanism to whitelist any protobuf message extension that
      # can be sent in grpc metadata using “x-goog-ext-<extension_id>-bin” and
      # “x-goog-ext-<extension_id>-jspb” format. For example, list any service
      # specific protobuf types that can appear in grpc metadata as follows in your
      # yaml file:
      # Example:
      # context:
      # rules:
      # - selector: "google.example.library.v1.LibraryService.CreateBook"
      # allowed_request_extensions:
      # - google.foo.v1.NewExtension
      # allowed_response_extensions:
      # - google.foo.v1.NewExtension
      # You can also specify extension ID instead of fully qualified extension name
      # here.
      class Context
        include Google::Apis::Core::Hashable
      
        # A list of RPC context rules that apply to individual API methods.
        # **NOTE:** All service configuration rules follow "last one wins" order.
        # Corresponds to the JSON property `rules`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::ContextRule>]
        attr_accessor :rules
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @rules = args[:rules] if args.key?(:rules)
        end
      end
      
      # A context rule provides information about the context for an individual API
      # element.
      class ContextRule
        include Google::Apis::Core::Hashable
      
        # A list of full type names or extension IDs of extensions allowed in grpc
        # side channel from client to backend.
        # Corresponds to the JSON property `allowedRequestExtensions`
        # @return [Array<String>]
        attr_accessor :allowed_request_extensions
      
        # A list of full type names or extension IDs of extensions allowed in grpc
        # side channel from backend to client.
        # Corresponds to the JSON property `allowedResponseExtensions`
        # @return [Array<String>]
        attr_accessor :allowed_response_extensions
      
        # A list of full type names of provided contexts.
        # Corresponds to the JSON property `provided`
        # @return [Array<String>]
        attr_accessor :provided
      
        # A list of full type names of requested contexts.
        # Corresponds to the JSON property `requested`
        # @return [Array<String>]
        attr_accessor :requested
      
        # Selects the methods to which this rule applies.
        # Refer to selector for syntax details.
        # Corresponds to the JSON property `selector`
        # @return [String]
        attr_accessor :selector
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @allowed_request_extensions = args[:allowed_request_extensions] if args.key?(:allowed_request_extensions)
          @allowed_response_extensions = args[:allowed_response_extensions] if args.key?(:allowed_response_extensions)
          @provided = args[:provided] if args.key?(:provided)
          @requested = args[:requested] if args.key?(:requested)
          @selector = args[:selector] if args.key?(:selector)
        end
      end
      
      # Selects and configures the service controller used by the service.  The
      # service controller handles features like abuse, quota, billing, logging,
      # monitoring, etc.
      class Control
        include Google::Apis::Core::Hashable
      
        # The service control environment to use. If empty, no control plane
        # feature (like quota and billing) will be enabled.
        # Corresponds to the JSON property `environment`
        # @return [String]
        attr_accessor :environment
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @environment = args[:environment] if args.key?(:environment)
        end
      end
      
      # Customize service error responses.  For example, list any service
      # specific protobuf types that can appear in error detail lists of
      # error responses.
      # Example:
      # custom_error:
      # types:
      # - google.foo.v1.CustomError
      # - google.foo.v1.AnotherError
      class CustomError
        include Google::Apis::Core::Hashable
      
        # The list of custom error rules that apply to individual API messages.
        # **NOTE:** All service configuration rules follow "last one wins" order.
        # Corresponds to the JSON property `rules`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::CustomErrorRule>]
        attr_accessor :rules
      
        # The list of custom error detail types, e.g. 'google.foo.v1.CustomError'.
        # Corresponds to the JSON property `types`
        # @return [Array<String>]
        attr_accessor :types
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @rules = args[:rules] if args.key?(:rules)
          @types = args[:types] if args.key?(:types)
        end
      end
      
      # A custom error rule.
      class CustomErrorRule
        include Google::Apis::Core::Hashable
      
        # Mark this message as possible payload in error response.  Otherwise,
        # objects of this type will be filtered when they appear in error payload.
        # Corresponds to the JSON property `isErrorType`
        # @return [Boolean]
        attr_accessor :is_error_type
        alias_method :is_error_type?, :is_error_type
      
        # Selects messages to which this rule applies.
        # Refer to selector for syntax details.
        # Corresponds to the JSON property `selector`
        # @return [String]
        attr_accessor :selector
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @is_error_type = args[:is_error_type] if args.key?(:is_error_type)
          @selector = args[:selector] if args.key?(:selector)
        end
      end
      
      # A custom pattern is used for defining custom HTTP verb.
      class CustomHttpPattern
        include Google::Apis::Core::Hashable
      
        # The name of this custom HTTP verb.
        # Corresponds to the JSON property `kind`
        # @return [String]
        attr_accessor :kind
      
        # The path matched by this custom verb.
        # Corresponds to the JSON property `path`
        # @return [String]
        attr_accessor :path
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @kind = args[:kind] if args.key?(:kind)
          @path = args[:path] if args.key?(:path)
        end
      end
      
      # `Documentation` provides the information for describing a service.
      # Example:
      # <pre><code>documentation:
      # summary: >
      # The Google Calendar API gives access
      # to most calendar features.
      # pages:
      # - name: Overview
      # content: &#40;== include google/foo/overview.md ==&#41;
      # - name: Tutorial
      # content: &#40;== include google/foo/tutorial.md ==&#41;
      # subpages;
      # - name: Java
      # content: &#40;== include google/foo/tutorial_java.md ==&#41;
      # rules:
      # - selector: google.calendar.Calendar.Get
      # description: >
      # ...
      # - selector: google.calendar.Calendar.Put
      # description: >
      # ...
      # </code></pre>
      # Documentation is provided in markdown syntax. In addition to
      # standard markdown features, definition lists, tables and fenced
      # code blocks are supported. Section headers can be provided and are
      # interpreted relative to the section nesting of the context where
      # a documentation fragment is embedded.
      # Documentation from the IDL is merged with documentation defined
      # via the config at normalization time, where documentation provided
      # by config rules overrides IDL provided.
      # A number of constructs specific to the API platform are supported
      # in documentation text.
      # In order to reference a proto element, the following
      # notation can be used:
      # <pre><code>&#91;fully.qualified.proto.name]&#91;]</code></pre>
      # To override the display text used for the link, this can be used:
      # <pre><code>&#91;display text]&#91;fully.qualified.proto.name]</code></pre>
      # Text can be excluded from doc using the following notation:
      # <pre><code>&#40;-- internal comment --&#41;</code></pre>
      # A few directives are available in documentation. Note that
      # directives must appear on a single line to be properly
      # identified. The `include` directive includes a markdown file from
      # an external source:
      # <pre><code>&#40;== include path/to/file ==&#41;</code></pre>
      # The `resource_for` directive marks a message to be the resource of
      # a collection in REST view. If it is not specified, tools attempt
      # to infer the resource from the operations in a collection:
      # <pre><code>&#40;== resource_for v1.shelves.books ==&#41;</code></pre>
      # The directive `suppress_warning` does not directly affect documentation
      # and is documented together with service config validation.
      class Documentation
        include Google::Apis::Core::Hashable
      
        # The URL to the root of documentation.
        # Corresponds to the JSON property `documentationRootUrl`
        # @return [String]
        attr_accessor :documentation_root_url
      
        # Declares a single overview page. For example:
        # <pre><code>documentation:
        # summary: ...
        # overview: &#40;== include overview.md ==&#41;
        # </code></pre>
        # This is a shortcut for the following declaration (using pages style):
        # <pre><code>documentation:
        # summary: ...
        # pages:
        # - name: Overview
        # content: &#40;== include overview.md ==&#41;
        # </code></pre>
        # Note: you cannot specify both `overview` field and `pages` field.
        # Corresponds to the JSON property `overview`
        # @return [String]
        attr_accessor :overview
      
        # The top level pages for the documentation set.
        # Corresponds to the JSON property `pages`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::Page>]
        attr_accessor :pages
      
        # A list of documentation rules that apply to individual API elements.
        # **NOTE:** All service configuration rules follow "last one wins" order.
        # Corresponds to the JSON property `rules`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::DocumentationRule>]
        attr_accessor :rules
      
        # Specifies the service root url if the default one (the service name
        # from the yaml file) is not suitable. This can be seen in any fully
        # specified service urls as well as sections that show a base that other
        # urls are relative to.
        # Corresponds to the JSON property `serviceRootUrl`
        # @return [String]
        attr_accessor :service_root_url
      
        # A short summary of what the service does. Can only be provided by
        # plain text.
        # Corresponds to the JSON property `summary`
        # @return [String]
        attr_accessor :summary
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @documentation_root_url = args[:documentation_root_url] if args.key?(:documentation_root_url)
          @overview = args[:overview] if args.key?(:overview)
          @pages = args[:pages] if args.key?(:pages)
          @rules = args[:rules] if args.key?(:rules)
          @service_root_url = args[:service_root_url] if args.key?(:service_root_url)
          @summary = args[:summary] if args.key?(:summary)
        end
      end
      
      # A documentation rule provides information about individual API elements.
      class DocumentationRule
        include Google::Apis::Core::Hashable
      
        # Deprecation description of the selected element(s). It can be provided if
        # an element is marked as `deprecated`.
        # Corresponds to the JSON property `deprecationDescription`
        # @return [String]
        attr_accessor :deprecation_description
      
        # Description of the selected API(s).
        # Corresponds to the JSON property `description`
        # @return [String]
        attr_accessor :description
      
        # The selector is a comma-separated list of patterns. Each pattern is a
        # qualified name of the element which may end in "*", indicating a wildcard.
        # Wildcards are only allowed at the end and for a whole component of the
        # qualified name, i.e. "foo.*" is ok, but not "foo.b*" or "foo.*.bar". A
        # wildcard will match one or more components. To specify a default for all
        # applicable elements, the whole pattern "*" is used.
        # Corresponds to the JSON property `selector`
        # @return [String]
        attr_accessor :selector
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @deprecation_description = args[:deprecation_description] if args.key?(:deprecation_description)
          @description = args[:description] if args.key?(:description)
          @selector = args[:selector] if args.key?(:selector)
        end
      end
      
      # `Endpoint` describes a network endpoint that serves a set of APIs.
      # A service may expose any number of endpoints, and all endpoints share the
      # same service configuration, such as quota configuration and monitoring
      # configuration.
      # Example service configuration:
      # name: library-example.googleapis.com
      # endpoints:
      # # Below entry makes 'google.example.library.v1.Library'
      # # API be served from endpoint address library-example.googleapis.com.
      # # It also allows HTTP OPTIONS calls to be passed to the backend, for
      # # it to decide whether the subsequent cross-origin request is
      # # allowed to proceed.
      # - name: library-example.googleapis.com
      # allow_cors: true
      class Endpoint
        include Google::Apis::Core::Hashable
      
        # DEPRECATED: This field is no longer supported. Instead of using aliases,
        # please specify multiple google.api.Endpoint for each of the intended
        # aliases.
        # Additional names that this endpoint will be hosted on.
        # Corresponds to the JSON property `aliases`
        # @return [Array<String>]
        attr_accessor :aliases
      
        # Allowing
        # [CORS](https://en.wikipedia.org/wiki/Cross-origin_resource_sharing), aka
        # cross-domain traffic, would allow the backends served from this endpoint to
        # receive and respond to HTTP OPTIONS requests. The response will be used by
        # the browser to determine whether the subsequent cross-origin request is
        # allowed to proceed.
        # Corresponds to the JSON property `allowCors`
        # @return [Boolean]
        attr_accessor :allow_cors
        alias_method :allow_cors?, :allow_cors
      
        # The list of features enabled on this endpoint.
        # Corresponds to the JSON property `features`
        # @return [Array<String>]
        attr_accessor :features
      
        # The canonical name of this endpoint.
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # The specification of an Internet routable address of API frontend that will
        # handle requests to this [API
        # Endpoint](https://cloud.google.com/apis/design/glossary). It should be
        # either a valid IPv4 address or a fully-qualified domain name. For example,
        # "8.8.8.8" or "myservice.appspot.com".
        # Corresponds to the JSON property `target`
        # @return [String]
        attr_accessor :target
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @aliases = args[:aliases] if args.key?(:aliases)
          @allow_cors = args[:allow_cors] if args.key?(:allow_cors)
          @features = args[:features] if args.key?(:features)
          @name = args[:name] if args.key?(:name)
          @target = args[:target] if args.key?(:target)
        end
      end
      
      # Enum type definition.
      class Enum
        include Google::Apis::Core::Hashable
      
        # Enum value definitions.
        # Corresponds to the JSON property `enumvalue`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::EnumValue>]
        attr_accessor :enumvalue
      
        # Enum type name.
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # Protocol buffer options.
        # Corresponds to the JSON property `options`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::Option>]
        attr_accessor :options
      
        # `SourceContext` represents information about the source of a
        # protobuf element, like the file in which it is defined.
        # Corresponds to the JSON property `sourceContext`
        # @return [Google::Apis::ServicenetworkingV1beta::SourceContext]
        attr_accessor :source_context
      
        # The source syntax.
        # Corresponds to the JSON property `syntax`
        # @return [String]
        attr_accessor :syntax
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @enumvalue = args[:enumvalue] if args.key?(:enumvalue)
          @name = args[:name] if args.key?(:name)
          @options = args[:options] if args.key?(:options)
          @source_context = args[:source_context] if args.key?(:source_context)
          @syntax = args[:syntax] if args.key?(:syntax)
        end
      end
      
      # Enum value definition.
      class EnumValue
        include Google::Apis::Core::Hashable
      
        # Enum value name.
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # Enum value number.
        # Corresponds to the JSON property `number`
        # @return [Fixnum]
        attr_accessor :number
      
        # Protocol buffer options.
        # Corresponds to the JSON property `options`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::Option>]
        attr_accessor :options
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @name = args[:name] if args.key?(:name)
          @number = args[:number] if args.key?(:number)
          @options = args[:options] if args.key?(:options)
        end
      end
      
      # A single field of a message type.
      class Field
        include Google::Apis::Core::Hashable
      
        # The field cardinality.
        # Corresponds to the JSON property `cardinality`
        # @return [String]
        attr_accessor :cardinality
      
        # The string value of the default value of this field. Proto2 syntax only.
        # Corresponds to the JSON property `defaultValue`
        # @return [String]
        attr_accessor :default_value
      
        # The field JSON name.
        # Corresponds to the JSON property `jsonName`
        # @return [String]
        attr_accessor :json_name
      
        # The field type.
        # Corresponds to the JSON property `kind`
        # @return [String]
        attr_accessor :kind
      
        # The field name.
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # The field number.
        # Corresponds to the JSON property `number`
        # @return [Fixnum]
        attr_accessor :number
      
        # The index of the field type in `Type.oneofs`, for message or enumeration
        # types. The first type has index 1; zero means the type is not in the list.
        # Corresponds to the JSON property `oneofIndex`
        # @return [Fixnum]
        attr_accessor :oneof_index
      
        # The protocol buffer options.
        # Corresponds to the JSON property `options`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::Option>]
        attr_accessor :options
      
        # Whether to use alternative packed wire representation.
        # Corresponds to the JSON property `packed`
        # @return [Boolean]
        attr_accessor :packed
        alias_method :packed?, :packed
      
        # The field type URL, without the scheme, for message or enumeration
        # types. Example: `"type.googleapis.com/google.protobuf.Timestamp"`.
        # Corresponds to the JSON property `typeUrl`
        # @return [String]
        attr_accessor :type_url
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @cardinality = args[:cardinality] if args.key?(:cardinality)
          @default_value = args[:default_value] if args.key?(:default_value)
          @json_name = args[:json_name] if args.key?(:json_name)
          @kind = args[:kind] if args.key?(:kind)
          @name = args[:name] if args.key?(:name)
          @number = args[:number] if args.key?(:number)
          @oneof_index = args[:oneof_index] if args.key?(:oneof_index)
          @options = args[:options] if args.key?(:options)
          @packed = args[:packed] if args.key?(:packed)
          @type_url = args[:type_url] if args.key?(:type_url)
        end
      end
      
      # Represents a subnet that was created or discovered by a private access
      # management service.
      class GoogleCloudServicenetworkingV1betaSubnetwork
        include Google::Apis::Core::Hashable
      
        # Subnetwork CIDR range in `10.x.x.x/y` format.
        # Corresponds to the JSON property `ipCidrRange`
        # @return [String]
        attr_accessor :ip_cidr_range
      
        # Subnetwork name.
        # See https://cloud.google.com/compute/docs/vpc/
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # In the Shared VPC host project, the VPC network that's peered with the
        # consumer network. For example:
        # `projects/1234321/global/networks/host-network`
        # Corresponds to the JSON property `network`
        # @return [String]
        attr_accessor :network
      
        # This is a discovered subnet that is not within the current consumer
        # allocated ranges.
        # Corresponds to the JSON property `outsideAllocation`
        # @return [Boolean]
        attr_accessor :outside_allocation
        alias_method :outside_allocation?, :outside_allocation
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @ip_cidr_range = args[:ip_cidr_range] if args.key?(:ip_cidr_range)
          @name = args[:name] if args.key?(:name)
          @network = args[:network] if args.key?(:network)
          @outside_allocation = args[:outside_allocation] if args.key?(:outside_allocation)
        end
      end
      
      # Defines the HTTP configuration for an API service. It contains a list of
      # HttpRule, each specifying the mapping of an RPC method
      # to one or more HTTP REST API methods.
      class Http
        include Google::Apis::Core::Hashable
      
        # When set to true, URL path parameters will be fully URI-decoded except in
        # cases of single segment matches in reserved expansion, where "%2F" will be
        # left encoded.
        # The default behavior is to not decode RFC 6570 reserved characters in multi
        # segment matches.
        # Corresponds to the JSON property `fullyDecodeReservedExpansion`
        # @return [Boolean]
        attr_accessor :fully_decode_reserved_expansion
        alias_method :fully_decode_reserved_expansion?, :fully_decode_reserved_expansion
      
        # A list of HTTP configuration rules that apply to individual API methods.
        # **NOTE:** All service configuration rules follow "last one wins" order.
        # Corresponds to the JSON property `rules`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::HttpRule>]
        attr_accessor :rules
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @fully_decode_reserved_expansion = args[:fully_decode_reserved_expansion] if args.key?(:fully_decode_reserved_expansion)
          @rules = args[:rules] if args.key?(:rules)
        end
      end
      
      # # gRPC Transcoding
      # gRPC Transcoding is a feature for mapping between a gRPC method and one or
      # more HTTP REST endpoints. It allows developers to build a single API service
      # that supports both gRPC APIs and REST APIs. Many systems, including [Google
      # APIs](https://github.com/googleapis/googleapis),
      # [Cloud Endpoints](https://cloud.google.com/endpoints), [gRPC
      # Gateway](https://github.com/grpc-ecosystem/grpc-gateway),
      # and [Envoy](https://github.com/envoyproxy/envoy) proxy support this feature
      # and use it for large scale production services.
      # `HttpRule` defines the schema of the gRPC/REST mapping. The mapping specifies
      # how different portions of the gRPC request message are mapped to the URL
      # path, URL query parameters, and HTTP request body. It also controls how the
      # gRPC response message is mapped to the HTTP response body. `HttpRule` is
      # typically specified as an `google.api.http` annotation on the gRPC method.
      # Each mapping specifies a URL path template and an HTTP method. The path
      # template may refer to one or more fields in the gRPC request message, as long
      # as each field is a non-repeated field with a primitive (non-message) type.
      # The path template controls how fields of the request message are mapped to
      # the URL path.
      # Example:
      # service Messaging `
      # rpc GetMessage(GetMessageRequest) returns (Message) `
      # option (google.api.http) = `
      # get: "/v1/`name=messages/*`"
      # `;
      # `
      # `
      # message GetMessageRequest `
      # string name = 1; // Mapped to URL path.
      # `
      # message Message `
      # string text = 1; // The resource content.
      # `
      # This enables an HTTP REST to gRPC mapping as below:
      # HTTP | gRPC
      # -----|-----
      # `GET /v1/messages/123456`  | `GetMessage(name: "messages/123456")`
      # Any fields in the request message which are not bound by the path template
      # automatically become HTTP query parameters if there is no HTTP request body.
      # For example:
      # service Messaging `
      # rpc GetMessage(GetMessageRequest) returns (Message) `
      # option (google.api.http) = `
      # get:"/v1/messages/`message_id`"
      # `;
      # `
      # `
      # message GetMessageRequest `
      # message SubMessage `
      # string subfield = 1;
      # `
      # string message_id = 1; // Mapped to URL path.
      # int64 revision = 2;    // Mapped to URL query parameter `revision`.
      # SubMessage sub = 3;    // Mapped to URL query parameter `sub.subfield`.
      # `
      # This enables a HTTP JSON to RPC mapping as below:
      # HTTP | gRPC
      # -----|-----
      # `GET /v1/messages/123456?revision=2&sub.subfield=foo` |
      # `GetMessage(message_id: "123456" revision: 2 sub: SubMessage(subfield:
      # "foo"))`
      # Note that fields which are mapped to URL query parameters must have a
      # primitive type or a repeated primitive type or a non-repeated message type.
      # In the case of a repeated type, the parameter can be repeated in the URL
      # as `...?param=A&param=B`. In the case of a message type, each field of the
      # message is mapped to a separate parameter, such as
      # `...?foo.a=A&foo.b=B&foo.c=C`.
      # For HTTP methods that allow a request body, the `body` field
      # specifies the mapping. Consider a REST update method on the
      # message resource collection:
      # service Messaging `
      # rpc UpdateMessage(UpdateMessageRequest) returns (Message) `
      # option (google.api.http) = `
      # patch: "/v1/messages/`message_id`"
      # body: "message"
      # `;
      # `
      # `
      # message UpdateMessageRequest `
      # string message_id = 1; // mapped to the URL
      # Message message = 2;   // mapped to the body
      # `
      # The following HTTP JSON to RPC mapping is enabled, where the
      # representation of the JSON in the request body is determined by
      # protos JSON encoding:
      # HTTP | gRPC
      # -----|-----
      # `PATCH /v1/messages/123456 ` "text": "Hi!" `` | `UpdateMessage(message_id:
      # "123456" message ` text: "Hi!" `)`
      # The special name `*` can be used in the body mapping to define that
      # every field not bound by the path template should be mapped to the
      # request body.  This enables the following alternative definition of
      # the update method:
      # service Messaging `
      # rpc UpdateMessage(Message) returns (Message) `
      # option (google.api.http) = `
      # patch: "/v1/messages/`message_id`"
      # body: "*"
      # `;
      # `
      # `
      # message Message `
      # string message_id = 1;
      # string text = 2;
      # `
      # The following HTTP JSON to RPC mapping is enabled:
      # HTTP | gRPC
      # -----|-----
      # `PATCH /v1/messages/123456 ` "text": "Hi!" `` | `UpdateMessage(message_id:
      # "123456" text: "Hi!")`
      # Note that when using `*` in the body mapping, it is not possible to
      # have HTTP parameters, as all fields not bound by the path end in
      # the body. This makes this option more rarely used in practice when
      # defining REST APIs. The common usage of `*` is in custom methods
      # which don't use the URL at all for transferring data.
      # It is possible to define multiple HTTP methods for one RPC by using
      # the `additional_bindings` option. Example:
      # service Messaging `
      # rpc GetMessage(GetMessageRequest) returns (Message) `
      # option (google.api.http) = `
      # get: "/v1/messages/`message_id`"
      # additional_bindings `
      # get: "/v1/users/`user_id`/messages/`message_id`"
      # `
      # `;
      # `
      # `
      # message GetMessageRequest `
      # string message_id = 1;
      # string user_id = 2;
      # `
      # This enables the following two alternative HTTP JSON to RPC mappings:
      # HTTP | gRPC
      # -----|-----
      # `GET /v1/messages/123456` | `GetMessage(message_id: "123456")`
      # `GET /v1/users/me/messages/123456` | `GetMessage(user_id: "me" message_id:
      # "123456")`
      # ## Rules for HTTP mapping
      # 1. Leaf request fields (recursive expansion nested messages in the request
      # message) are classified into three categories:
      # - Fields referred by the path template. They are passed via the URL path.
      # - Fields referred by the HttpRule.body. They are passed via the HTTP
      # request body.
      # - All other fields are passed via the URL query parameters, and the
      # parameter name is the field path in the request message. A repeated
      # field can be represented as multiple query parameters under the same
      # name.
      # 2. If HttpRule.body is "*", there is no URL query parameter, all fields
      # are passed via URL path and HTTP request body.
      # 3. If HttpRule.body is omitted, there is no HTTP request body, all
      # fields are passed via URL path and URL query parameters.
      # ### Path template syntax
      # Template = "/" Segments [ Verb ] ;
      # Segments = Segment ` "/" Segment ` ;
      # Segment  = "*" | "**" | LITERAL | Variable ;
      # Variable = "`" FieldPath [ "=" Segments ] "`" ;
      # FieldPath = IDENT ` "." IDENT ` ;
      # Verb     = ":" LITERAL ;
      # The syntax `*` matches a single URL path segment. The syntax `**` matches
      # zero or more URL path segments, which must be the last part of the URL path
      # except the `Verb`.
      # The syntax `Variable` matches part of the URL path as specified by its
      # template. A variable template must not contain other variables. If a variable
      # matches a single path segment, its template may be omitted, e.g. ``var``
      # is equivalent to ``var=*``.
      # The syntax `LITERAL` matches literal text in the URL path. If the `LITERAL`
      # contains any reserved character, such characters should be percent-encoded
      # before the matching.
      # If a variable contains exactly one path segment, such as `"`var`"` or
      # `"`var=*`"`, when such a variable is expanded into a URL path on the client
      # side, all characters except `[-_.~0-9a-zA-Z]` are percent-encoded. The
      # server side does the reverse decoding. Such variables show up in the
      # [Discovery
      # Document](https://developers.google.com/discovery/v1/reference/apis) as
      # ``var``.
      # If a variable contains multiple path segments, such as `"`var=foo/*`"`
      # or `"`var=**`"`, when such a variable is expanded into a URL path on the
      # client side, all characters except `[-_.~/0-9a-zA-Z]` are percent-encoded.
      # The server side does the reverse decoding, except "%2F" and "%2f" are left
      # unchanged. Such variables show up in the
      # [Discovery
      # Document](https://developers.google.com/discovery/v1/reference/apis) as
      # ``+var``.
      # ## Using gRPC API Service Configuration
      # gRPC API Service Configuration (service config) is a configuration language
      # for configuring a gRPC service to become a user-facing product. The
      # service config is simply the YAML representation of the `google.api.Service`
      # proto message.
      # As an alternative to annotating your proto file, you can configure gRPC
      # transcoding in your service config YAML files. You do this by specifying a
      # `HttpRule` that maps the gRPC method to a REST endpoint, achieving the same
      # effect as the proto annotation. This can be particularly useful if you
      # have a proto that is reused in multiple services. Note that any transcoding
      # specified in the service config will override any matching transcoding
      # configuration in the proto.
      # Example:
      # http:
      # rules:
      # # Selects a gRPC method and applies HttpRule to it.
      # - selector: example.v1.Messaging.GetMessage
      # get: /v1/messages/`message_id`/`sub.subfield`
      # ## Special notes
      # When gRPC Transcoding is used to map a gRPC to JSON REST endpoints, the
      # proto to JSON conversion must follow the [proto3
      # specification](https://developers.google.com/protocol-buffers/docs/proto3#json)
      # .
      # While the single segment variable follows the semantics of
      # [RFC 6570](https://tools.ietf.org/html/rfc6570) Section 3.2.2 Simple String
      # Expansion, the multi segment variable **does not** follow RFC 6570 Section
      # 3.2.3 Reserved Expansion. The reason is that the Reserved Expansion
      # does not expand special characters like `?` and `#`, which would lead
      # to invalid URLs. As the result, gRPC Transcoding uses a custom encoding
      # for multi segment variables.
      # The path variables **must not** refer to any repeated or mapped field,
      # because client libraries are not capable of handling such variable expansion.
      # The path variables **must not** capture the leading "/" character. The reason
      # is that the most common use case "`var`" does not capture the leading "/"
      # character. For consistency, all path variables must share the same behavior.
      # Repeated message fields must not be mapped to URL query parameters, because
      # no client library can support such complicated mapping.
      # If an API needs to use a JSON array for request or response body, it can map
      # the request or response body to a repeated field. However, some gRPC
      # Transcoding implementations may not support this feature.
      class HttpRule
        include Google::Apis::Core::Hashable
      
        # Additional HTTP bindings for the selector. Nested bindings must
        # not contain an `additional_bindings` field themselves (that is,
        # the nesting may only be one level deep).
        # Corresponds to the JSON property `additionalBindings`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::HttpRule>]
        attr_accessor :additional_bindings
      
        # When this flag is set to true, HTTP requests will be allowed to invoke a
        # half-duplex streaming method.
        # Corresponds to the JSON property `allowHalfDuplex`
        # @return [Boolean]
        attr_accessor :allow_half_duplex
        alias_method :allow_half_duplex?, :allow_half_duplex
      
        # The name of the request field whose value is mapped to the HTTP request
        # body, or `*` for mapping all request fields not captured by the path
        # pattern to the HTTP body, or omitted for not having any HTTP request body.
        # NOTE: the referred field must be present at the top-level of the request
        # message type.
        # Corresponds to the JSON property `body`
        # @return [String]
        attr_accessor :body
      
        # A custom pattern is used for defining custom HTTP verb.
        # Corresponds to the JSON property `custom`
        # @return [Google::Apis::ServicenetworkingV1beta::CustomHttpPattern]
        attr_accessor :custom
      
        # Maps to HTTP DELETE. Used for deleting a resource.
        # Corresponds to the JSON property `delete`
        # @return [String]
        attr_accessor :delete
      
        # Maps to HTTP GET. Used for listing and getting information about
        # resources.
        # Corresponds to the JSON property `get`
        # @return [String]
        attr_accessor :get
      
        # Maps to HTTP PATCH. Used for updating a resource.
        # Corresponds to the JSON property `patch`
        # @return [String]
        attr_accessor :patch
      
        # Maps to HTTP POST. Used for creating a resource or performing an action.
        # Corresponds to the JSON property `post`
        # @return [String]
        attr_accessor :post
      
        # Maps to HTTP PUT. Used for replacing a resource.
        # Corresponds to the JSON property `put`
        # @return [String]
        attr_accessor :put
      
        # Optional. The name of the response field whose value is mapped to the HTTP
        # response body. When omitted, the entire response message will be used
        # as the HTTP response body.
        # NOTE: The referred field must be present at the top-level of the response
        # message type.
        # Corresponds to the JSON property `responseBody`
        # @return [String]
        attr_accessor :response_body
      
        # Selects a method to which this rule applies.
        # Refer to selector for syntax details.
        # Corresponds to the JSON property `selector`
        # @return [String]
        attr_accessor :selector
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @additional_bindings = args[:additional_bindings] if args.key?(:additional_bindings)
          @allow_half_duplex = args[:allow_half_duplex] if args.key?(:allow_half_duplex)
          @body = args[:body] if args.key?(:body)
          @custom = args[:custom] if args.key?(:custom)
          @delete = args[:delete] if args.key?(:delete)
          @get = args[:get] if args.key?(:get)
          @patch = args[:patch] if args.key?(:patch)
          @post = args[:post] if args.key?(:post)
          @put = args[:put] if args.key?(:put)
          @response_body = args[:response_body] if args.key?(:response_body)
          @selector = args[:selector] if args.key?(:selector)
        end
      end
      
      # A description of a label.
      class LabelDescriptor
        include Google::Apis::Core::Hashable
      
        # A human-readable description for the label.
        # Corresponds to the JSON property `description`
        # @return [String]
        attr_accessor :description
      
        # The label key.
        # Corresponds to the JSON property `key`
        # @return [String]
        attr_accessor :key
      
        # The type of data that can be assigned to the label.
        # Corresponds to the JSON property `valueType`
        # @return [String]
        attr_accessor :value_type
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @description = args[:description] if args.key?(:description)
          @key = args[:key] if args.key?(:key)
          @value_type = args[:value_type] if args.key?(:value_type)
        end
      end
      
      # ListConnectionsResponse is the response to list peering states for the
      # given service and consumer project.
      class ListConnectionsResponse
        include Google::Apis::Core::Hashable
      
        # The list of Connections.
        # Corresponds to the JSON property `connections`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::Connection>]
        attr_accessor :connections
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @connections = args[:connections] if args.key?(:connections)
        end
      end
      
      # A description of a log type. Example in YAML format:
      # - name: library.googleapis.com/activity_history
      # description: The history of borrowing and returning library items.
      # display_name: Activity
      # labels:
      # - key: /customer_id
      # description: Identifier of a library customer
      class LogDescriptor
        include Google::Apis::Core::Hashable
      
        # A human-readable description of this log. This information appears in
        # the documentation and can contain details.
        # Corresponds to the JSON property `description`
        # @return [String]
        attr_accessor :description
      
        # The human-readable name for this log. This information appears on
        # the user interface and should be concise.
        # Corresponds to the JSON property `displayName`
        # @return [String]
        attr_accessor :display_name
      
        # The set of labels that are available to describe a specific log entry.
        # Runtime requests that contain labels not specified here are
        # considered invalid.
        # Corresponds to the JSON property `labels`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::LabelDescriptor>]
        attr_accessor :labels
      
        # The name of the log. It must be less than 512 characters long and can
        # include the following characters: upper- and lower-case alphanumeric
        # characters [A-Za-z0-9], and punctuation characters including
        # slash, underscore, hyphen, period [/_-.].
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @description = args[:description] if args.key?(:description)
          @display_name = args[:display_name] if args.key?(:display_name)
          @labels = args[:labels] if args.key?(:labels)
          @name = args[:name] if args.key?(:name)
        end
      end
      
      # Logging configuration of the service.
      # The following example shows how to configure logs to be sent to the
      # producer and consumer projects. In the example, the `activity_history`
      # log is sent to both the producer and consumer projects, whereas the
      # `purchase_history` log is only sent to the producer project.
      # monitored_resources:
      # - type: library.googleapis.com/branch
      # labels:
      # - key: /city
      # description: The city where the library branch is located in.
      # - key: /name
      # description: The name of the branch.
      # logs:
      # - name: activity_history
      # labels:
      # - key: /customer_id
      # - name: purchase_history
      # logging:
      # producer_destinations:
      # - monitored_resource: library.googleapis.com/branch
      # logs:
      # - activity_history
      # - purchase_history
      # consumer_destinations:
      # - monitored_resource: library.googleapis.com/branch
      # logs:
      # - activity_history
      class Logging
        include Google::Apis::Core::Hashable
      
        # Logging configurations for sending logs to the consumer project.
        # There can be multiple consumer destinations, each one must have a
        # different monitored resource type. A log can be used in at most
        # one consumer destination.
        # Corresponds to the JSON property `consumerDestinations`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::LoggingDestination>]
        attr_accessor :consumer_destinations
      
        # Logging configurations for sending logs to the producer project.
        # There can be multiple producer destinations, each one must have a
        # different monitored resource type. A log can be used in at most
        # one producer destination.
        # Corresponds to the JSON property `producerDestinations`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::LoggingDestination>]
        attr_accessor :producer_destinations
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @consumer_destinations = args[:consumer_destinations] if args.key?(:consumer_destinations)
          @producer_destinations = args[:producer_destinations] if args.key?(:producer_destinations)
        end
      end
      
      # Configuration of a specific logging destination (the producer project
      # or the consumer project).
      class LoggingDestination
        include Google::Apis::Core::Hashable
      
        # Names of the logs to be sent to this destination. Each name must
        # be defined in the Service.logs section. If the log name is
        # not a domain scoped name, it will be automatically prefixed with
        # the service name followed by "/".
        # Corresponds to the JSON property `logs`
        # @return [Array<String>]
        attr_accessor :logs
      
        # The monitored resource type. The type must be defined in the
        # Service.monitored_resources section.
        # Corresponds to the JSON property `monitoredResource`
        # @return [String]
        attr_accessor :monitored_resource
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @logs = args[:logs] if args.key?(:logs)
          @monitored_resource = args[:monitored_resource] if args.key?(:monitored_resource)
        end
      end
      
      # Method represents a method of an API interface.
      class MethodProp
        include Google::Apis::Core::Hashable
      
        # The simple name of this method.
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # Any metadata attached to the method.
        # Corresponds to the JSON property `options`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::Option>]
        attr_accessor :options
      
        # If true, the request is streamed.
        # Corresponds to the JSON property `requestStreaming`
        # @return [Boolean]
        attr_accessor :request_streaming
        alias_method :request_streaming?, :request_streaming
      
        # A URL of the input message type.
        # Corresponds to the JSON property `requestTypeUrl`
        # @return [String]
        attr_accessor :request_type_url
      
        # If true, the response is streamed.
        # Corresponds to the JSON property `responseStreaming`
        # @return [Boolean]
        attr_accessor :response_streaming
        alias_method :response_streaming?, :response_streaming
      
        # The URL of the output message type.
        # Corresponds to the JSON property `responseTypeUrl`
        # @return [String]
        attr_accessor :response_type_url
      
        # The source syntax of this method.
        # Corresponds to the JSON property `syntax`
        # @return [String]
        attr_accessor :syntax
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @name = args[:name] if args.key?(:name)
          @options = args[:options] if args.key?(:options)
          @request_streaming = args[:request_streaming] if args.key?(:request_streaming)
          @request_type_url = args[:request_type_url] if args.key?(:request_type_url)
          @response_streaming = args[:response_streaming] if args.key?(:response_streaming)
          @response_type_url = args[:response_type_url] if args.key?(:response_type_url)
          @syntax = args[:syntax] if args.key?(:syntax)
        end
      end
      
      # Defines a metric type and its schema. Once a metric descriptor is created,
      # deleting or altering it stops data collection and makes the metric type's
      # existing data unusable.
      class MetricDescriptor
        include Google::Apis::Core::Hashable
      
        # A detailed description of the metric, which can be used in documentation.
        # Corresponds to the JSON property `description`
        # @return [String]
        attr_accessor :description
      
        # A concise name for the metric, which can be displayed in user interfaces.
        # Use sentence case without an ending period, for example "Request count".
        # This field is optional but it is recommended to be set for any metrics
        # associated with user-visible concepts, such as Quota.
        # Corresponds to the JSON property `displayName`
        # @return [String]
        attr_accessor :display_name
      
        # The set of labels that can be used to describe a specific
        # instance of this metric type. For example, the
        # `appengine.googleapis.com/http/server/response_latencies` metric
        # type has a label for the HTTP response code, `response_code`, so
        # you can look at latencies for successful responses or just
        # for responses that failed.
        # Corresponds to the JSON property `labels`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::LabelDescriptor>]
        attr_accessor :labels
      
        # Optional. The launch stage of the metric definition.
        # Corresponds to the JSON property `launchStage`
        # @return [String]
        attr_accessor :launch_stage
      
        # Additional annotations that can be used to guide the usage of a metric.
        # Corresponds to the JSON property `metadata`
        # @return [Google::Apis::ServicenetworkingV1beta::MetricDescriptorMetadata]
        attr_accessor :metadata
      
        # Whether the metric records instantaneous values, changes to a value, etc.
        # Some combinations of `metric_kind` and `value_type` might not be supported.
        # Corresponds to the JSON property `metricKind`
        # @return [String]
        attr_accessor :metric_kind
      
        # Read-only. If present, then a time
        # series, which is identified partially by
        # a metric type and a MonitoredResourceDescriptor, that is associated
        # with this metric type can only be associated with one of the monitored
        # resource types listed here.
        # Corresponds to the JSON property `monitoredResourceTypes`
        # @return [Array<String>]
        attr_accessor :monitored_resource_types
      
        # The resource name of the metric descriptor.
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # The metric type, including its DNS name prefix. The type is not
        # URL-encoded.  All user-defined metric types have the DNS name
        # `custom.googleapis.com` or `external.googleapis.com`.  Metric types should
        # use a natural hierarchical grouping. For example:
        # "custom.googleapis.com/invoice/paid/amount"
        # "external.googleapis.com/prometheus/up"
        # "appengine.googleapis.com/http/server/response_latencies"
        # Corresponds to the JSON property `type`
        # @return [String]
        attr_accessor :type
      
        # The units in which the metric value is reported. It is only applicable
        # if the `value_type` is `INT64`, `DOUBLE`, or `DISTRIBUTION`. The `unit`
        # defines the representation of the stored metric values.
        # Different systems may scale the values to be more easily displayed (so a
        # value of `0.02KBy` _might_ be displayed as `20By`, and a value of
        # `3523KBy` _might_ be displayed as `3.5MBy`). However, if the `unit` is
        # `KBy`, then the value of the metric is always in thousands of bytes, no
        # matter how it may be displayed..
        # If you want a custom metric to record the exact number of CPU-seconds used
        # by a job, you can create an `INT64 CUMULATIVE` metric whose `unit` is
        # `s`CPU`` (or equivalently `1s`CPU`` or just `s`). If the job uses 12,005
        # CPU-seconds, then the value is written as `12005`.
        # Alternatively, if you want a custom metric to record data in a more
        # granular way, you can create a `DOUBLE CUMULATIVE` metric whose `unit` is
        # `ks`CPU``, and then write the value `12.005` (which is `12005/1000`),
        # or use `Kis`CPU`` and write `11.723` (which is `12005/1024`).
        # The supported units are a subset of [The Unified Code for Units of
        # Measure](http://unitsofmeasure.org/ucum.html) standard:
        # **Basic units (UNIT)**
        # * `bit`   bit
        # * `By`    byte
        # * `s`     second
        # * `min`   minute
        # * `h`     hour
        # * `d`     day
        # **Prefixes (PREFIX)**
        # * `k`     kilo    (10^3)
        # * `M`     mega    (10^6)
        # * `G`     giga    (10^9)
        # * `T`     tera    (10^12)
        # * `P`     peta    (10^15)
        # * `E`     exa     (10^18)
        # * `Z`     zetta   (10^21)
        # * `Y`     yotta   (10^24)
        # * `m`     milli   (10^-3)
        # * `u`     micro   (10^-6)
        # * `n`     nano    (10^-9)
        # * `p`     pico    (10^-12)
        # * `f`     femto   (10^-15)
        # * `a`     atto    (10^-18)
        # * `z`     zepto   (10^-21)
        # * `y`     yocto   (10^-24)
        # * `Ki`    kibi    (2^10)
        # * `Mi`    mebi    (2^20)
        # * `Gi`    gibi    (2^30)
        # * `Ti`    tebi    (2^40)
        # * `Pi`    pebi    (2^50)
        # **Grammar**
        # The grammar also includes these connectors:
        # * `/`    division or ratio (as an infix operator). For examples,
        # `kBy/`email`` or `MiBy/10ms` (although you should almost never
        # have `/s` in a metric `unit`; rates should always be computed at
        # query time from the underlying cumulative or delta value).
        # * `.`    multiplication or composition (as an infix operator). For
        # examples, `GBy.d` or `k`watt`.h`.
        # The grammar for a unit is as follows:
        # Expression = Component ` "." Component ` ` "/" Component ` ;
        # Component = ( [ PREFIX ] UNIT | "%" ) [ Annotation ]
        # | Annotation
        # | "1"
        # ;
        # Annotation = "`" NAME "`" ;
        # Notes:
        # * `Annotation` is just a comment if it follows a `UNIT`. If the annotation
        # is used alone, then the unit is equivalent to `1`. For examples,
        # ``request`/s == 1/s`, `By`transmitted`/s == By/s`.
        # * `NAME` is a sequence of non-blank printable ASCII characters not
        # containing ``` or ```.
        # * `1` represents a unitary [dimensionless
        # unit](https://en.wikipedia.org/wiki/Dimensionless_quantity) of 1, such
        # as in `1/s`. It is typically used when none of the basic units are
        # appropriate. For example, "new users per day" can be represented as
        # `1/d` or ``new-users`/d` (and a metric value `5` would mean "5 new
        # users). Alternatively, "thousands of page views per day" would be
        # represented as `1000/d` or `k1/d` or `k`page_views`/d` (and a metric
        # value of `5.3` would mean "5300 page views per day").
        # * `%` represents dimensionless value of 1/100, and annotates values giving
        # a percentage (so the metric values are typically in the range of 0..100,
        # and a metric value `3` means "3 percent").
        # * `10^2.%` indicates a metric contains a ratio, typically in the range
        # 0..1, that will be multiplied by 100 and displayed as a percentage
        # (so a metric value `0.03` means "3 percent").
        # Corresponds to the JSON property `unit`
        # @return [String]
        attr_accessor :unit
      
        # Whether the measurement is an integer, a floating-point number, etc.
        # Some combinations of `metric_kind` and `value_type` might not be supported.
        # Corresponds to the JSON property `valueType`
        # @return [String]
        attr_accessor :value_type
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @description = args[:description] if args.key?(:description)
          @display_name = args[:display_name] if args.key?(:display_name)
          @labels = args[:labels] if args.key?(:labels)
          @launch_stage = args[:launch_stage] if args.key?(:launch_stage)
          @metadata = args[:metadata] if args.key?(:metadata)
          @metric_kind = args[:metric_kind] if args.key?(:metric_kind)
          @monitored_resource_types = args[:monitored_resource_types] if args.key?(:monitored_resource_types)
          @name = args[:name] if args.key?(:name)
          @type = args[:type] if args.key?(:type)
          @unit = args[:unit] if args.key?(:unit)
          @value_type = args[:value_type] if args.key?(:value_type)
        end
      end
      
      # Additional annotations that can be used to guide the usage of a metric.
      class MetricDescriptorMetadata
        include Google::Apis::Core::Hashable
      
        # The delay of data points caused by ingestion. Data points older than this
        # age are guaranteed to be ingested and available to be read, excluding
        # data loss due to errors.
        # Corresponds to the JSON property `ingestDelay`
        # @return [String]
        attr_accessor :ingest_delay
      
        # Deprecated. Must use the MetricDescriptor.launch_stage instead.
        # Corresponds to the JSON property `launchStage`
        # @return [String]
        attr_accessor :launch_stage
      
        # The sampling period of metric data points. For metrics which are written
        # periodically, consecutive data points are stored at this time interval,
        # excluding data loss due to errors. Metrics with a higher granularity have
        # a smaller sampling period.
        # Corresponds to the JSON property `samplePeriod`
        # @return [String]
        attr_accessor :sample_period
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @ingest_delay = args[:ingest_delay] if args.key?(:ingest_delay)
          @launch_stage = args[:launch_stage] if args.key?(:launch_stage)
          @sample_period = args[:sample_period] if args.key?(:sample_period)
        end
      end
      
      # Bind API methods to metrics. Binding a method to a metric causes that
      # metric's configured quota behaviors to apply to the method call.
      class MetricRule
        include Google::Apis::Core::Hashable
      
        # Metrics to update when the selected methods are called, and the associated
        # cost applied to each metric.
        # The key of the map is the metric name, and the values are the amount
        # increased for the metric against which the quota limits are defined.
        # The value must not be negative.
        # Corresponds to the JSON property `metricCosts`
        # @return [Hash<String,Fixnum>]
        attr_accessor :metric_costs
      
        # Selects the methods to which this rule applies.
        # Refer to selector for syntax details.
        # Corresponds to the JSON property `selector`
        # @return [String]
        attr_accessor :selector
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @metric_costs = args[:metric_costs] if args.key?(:metric_costs)
          @selector = args[:selector] if args.key?(:selector)
        end
      end
      
      # Declares an API Interface to be included in this interface. The including
      # interface must redeclare all the methods from the included interface, but
      # documentation and options are inherited as follows:
      # - If after comment and whitespace stripping, the documentation
      # string of the redeclared method is empty, it will be inherited
      # from the original method.
      # - Each annotation belonging to the service config (http,
      # visibility) which is not set in the redeclared method will be
      # inherited.
      # - If an http annotation is inherited, the path pattern will be
      # modified as follows. Any version prefix will be replaced by the
      # version of the including interface plus the root path if
      # specified.
      # Example of a simple mixin:
      # package google.acl.v1;
      # service AccessControl `
      # // Get the underlying ACL object.
      # rpc GetAcl(GetAclRequest) returns (Acl) `
      # option (google.api.http).get = "/v1/`resource=**`:getAcl";
      # `
      # `
      # package google.storage.v2;
      # service Storage `
      # //       rpc GetAcl(GetAclRequest) returns (Acl);
      # // Get a data record.
      # rpc GetData(GetDataRequest) returns (Data) `
      # option (google.api.http).get = "/v2/`resource=**`";
      # `
      # `
      # Example of a mixin configuration:
      # apis:
      # - name: google.storage.v2.Storage
      # mixins:
      # - name: google.acl.v1.AccessControl
      # The mixin construct implies that all methods in `AccessControl` are
      # also declared with same name and request/response types in
      # `Storage`. A documentation generator or annotation processor will
      # see the effective `Storage.GetAcl` method after inherting
      # documentation and annotations as follows:
      # service Storage `
      # // Get the underlying ACL object.
      # rpc GetAcl(GetAclRequest) returns (Acl) `
      # option (google.api.http).get = "/v2/`resource=**`:getAcl";
      # `
      # ...
      # `
      # Note how the version in the path pattern changed from `v1` to `v2`.
      # If the `root` field in the mixin is specified, it should be a
      # relative path under which inherited HTTP paths are placed. Example:
      # apis:
      # - name: google.storage.v2.Storage
      # mixins:
      # - name: google.acl.v1.AccessControl
      # root: acls
      # This implies the following inherited HTTP annotation:
      # service Storage `
      # // Get the underlying ACL object.
      # rpc GetAcl(GetAclRequest) returns (Acl) `
      # option (google.api.http).get = "/v2/acls/`resource=**`:getAcl";
      # `
      # ...
      # `
      class Mixin
        include Google::Apis::Core::Hashable
      
        # The fully qualified name of the interface which is included.
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # If non-empty specifies a path under which inherited HTTP paths
        # are rooted.
        # Corresponds to the JSON property `root`
        # @return [String]
        attr_accessor :root
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @name = args[:name] if args.key?(:name)
          @root = args[:root] if args.key?(:root)
        end
      end
      
      # An object that describes the schema of a MonitoredResource object using a
      # type name and a set of labels.  For example, the monitored resource
      # descriptor for Google Compute Engine VM instances has a type of
      # `"gce_instance"` and specifies the use of the labels `"instance_id"` and
      # `"zone"` to identify particular VM instances.
      # Different APIs can support different monitored resource types. APIs generally
      # provide a `list` method that returns the monitored resource descriptors used
      # by the API.
      class MonitoredResourceDescriptor
        include Google::Apis::Core::Hashable
      
        # Optional. A detailed description of the monitored resource type that might
        # be used in documentation.
        # Corresponds to the JSON property `description`
        # @return [String]
        attr_accessor :description
      
        # Optional. A concise name for the monitored resource type that might be
        # displayed in user interfaces. It should be a Title Cased Noun Phrase,
        # without any article or other determiners. For example,
        # `"Google Cloud SQL Database"`.
        # Corresponds to the JSON property `displayName`
        # @return [String]
        attr_accessor :display_name
      
        # Required. A set of labels used to describe instances of this monitored
        # resource type. For example, an individual Google Cloud SQL database is
        # identified by values for the labels `"database_id"` and `"zone"`.
        # Corresponds to the JSON property `labels`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::LabelDescriptor>]
        attr_accessor :labels
      
        # Optional. The launch stage of the monitored resource definition.
        # Corresponds to the JSON property `launchStage`
        # @return [String]
        attr_accessor :launch_stage
      
        # Optional. The resource name of the monitored resource descriptor:
        # `"projects/`project_id`/monitoredResourceDescriptors/`type`"` where
        # `type` is the value of the `type` field in this object and
        # `project_id` is a project ID that provides API-specific context for
        # accessing the type.  APIs that do not use project information can use the
        # resource name format `"monitoredResourceDescriptors/`type`"`.
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # Required. The monitored resource type. For example, the type
        # `"cloudsql_database"` represents databases in Google Cloud SQL.
        # The maximum length of this value is 256 characters.
        # Corresponds to the JSON property `type`
        # @return [String]
        attr_accessor :type
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @description = args[:description] if args.key?(:description)
          @display_name = args[:display_name] if args.key?(:display_name)
          @labels = args[:labels] if args.key?(:labels)
          @launch_stage = args[:launch_stage] if args.key?(:launch_stage)
          @name = args[:name] if args.key?(:name)
          @type = args[:type] if args.key?(:type)
        end
      end
      
      # Monitoring configuration of the service.
      # The example below shows how to configure monitored resources and metrics
      # for monitoring. In the example, a monitored resource and two metrics are
      # defined. The `library.googleapis.com/book/returned_count` metric is sent
      # to both producer and consumer projects, whereas the
      # `library.googleapis.com/book/overdue_count` metric is only sent to the
      # consumer project.
      # monitored_resources:
      # - type: library.googleapis.com/branch
      # labels:
      # - key: /city
      # description: The city where the library branch is located in.
      # - key: /name
      # description: The name of the branch.
      # metrics:
      # - name: library.googleapis.com/book/returned_count
      # metric_kind: DELTA
      # value_type: INT64
      # labels:
      # - key: /customer_id
      # - name: library.googleapis.com/book/overdue_count
      # metric_kind: GAUGE
      # value_type: INT64
      # labels:
      # - key: /customer_id
      # monitoring:
      # producer_destinations:
      # - monitored_resource: library.googleapis.com/branch
      # metrics:
      # - library.googleapis.com/book/returned_count
      # consumer_destinations:
      # - monitored_resource: library.googleapis.com/branch
      # metrics:
      # - library.googleapis.com/book/returned_count
      # - library.googleapis.com/book/overdue_count
      class Monitoring
        include Google::Apis::Core::Hashable
      
        # Monitoring configurations for sending metrics to the consumer project.
        # There can be multiple consumer destinations. A monitored resouce type may
        # appear in multiple monitoring destinations if different aggregations are
        # needed for different sets of metrics associated with that monitored
        # resource type. A monitored resource and metric pair may only be used once
        # in the Monitoring configuration.
        # Corresponds to the JSON property `consumerDestinations`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::MonitoringDestination>]
        attr_accessor :consumer_destinations
      
        # Monitoring configurations for sending metrics to the producer project.
        # There can be multiple producer destinations. A monitored resouce type may
        # appear in multiple monitoring destinations if different aggregations are
        # needed for different sets of metrics associated with that monitored
        # resource type. A monitored resource and metric pair may only be used once
        # in the Monitoring configuration.
        # Corresponds to the JSON property `producerDestinations`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::MonitoringDestination>]
        attr_accessor :producer_destinations
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @consumer_destinations = args[:consumer_destinations] if args.key?(:consumer_destinations)
          @producer_destinations = args[:producer_destinations] if args.key?(:producer_destinations)
        end
      end
      
      # Configuration of a specific monitoring destination (the producer project
      # or the consumer project).
      class MonitoringDestination
        include Google::Apis::Core::Hashable
      
        # Types of the metrics to report to this monitoring destination.
        # Each type must be defined in Service.metrics section.
        # Corresponds to the JSON property `metrics`
        # @return [Array<String>]
        attr_accessor :metrics
      
        # The monitored resource type. The type must be defined in
        # Service.monitored_resources section.
        # Corresponds to the JSON property `monitoredResource`
        # @return [String]
        attr_accessor :monitored_resource
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @metrics = args[:metrics] if args.key?(:metrics)
          @monitored_resource = args[:monitored_resource] if args.key?(:monitored_resource)
        end
      end
      
      # OAuth scopes are a way to define data and permissions on data. For example,
      # there are scopes defined for "Read-only access to Google Calendar" and
      # "Access to Cloud Platform". Users can consent to a scope for an application,
      # giving it permission to access that data on their behalf.
      # OAuth scope specifications should be fairly coarse grained; a user will need
      # to see and understand the text description of what your scope means.
      # In most cases: use one or at most two OAuth scopes for an entire family of
      # products. If your product has multiple APIs, you should probably be sharing
      # the OAuth scope across all of those APIs.
      # When you need finer grained OAuth consent screens: talk with your product
      # management about how developers will use them in practice.
      # Please note that even though each of the canonical scopes is enough for a
      # request to be accepted and passed to the backend, a request can still fail
      # due to the backend requiring additional scopes or permissions.
      class OAuthRequirements
        include Google::Apis::Core::Hashable
      
        # The list of publicly documented OAuth scopes that are allowed access. An
        # OAuth token containing any of these scopes will be accepted.
        # Example:
        # canonical_scopes: https://www.googleapis.com/auth/calendar,
        # https://www.googleapis.com/auth/calendar.read
        # Corresponds to the JSON property `canonicalScopes`
        # @return [String]
        attr_accessor :canonical_scopes
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @canonical_scopes = args[:canonical_scopes] if args.key?(:canonical_scopes)
        end
      end
      
      # This resource represents a long-running operation that is the result of a
      # network API call.
      class Operation
        include Google::Apis::Core::Hashable
      
        # If the value is `false`, it means the operation is still in progress.
        # If `true`, the operation is completed, and either `error` or `response` is
        # available.
        # Corresponds to the JSON property `done`
        # @return [Boolean]
        attr_accessor :done
        alias_method :done?, :done
      
        # The `Status` type defines a logical error model that is suitable for
        # different programming environments, including REST APIs and RPC APIs. It is
        # used by [gRPC](https://github.com/grpc). Each `Status` message contains
        # three pieces of data: error code, error message, and error details.
        # You can find out more about this error model and how to work with it in the
        # [API Design Guide](https://cloud.google.com/apis/design/errors).
        # Corresponds to the JSON property `error`
        # @return [Google::Apis::ServicenetworkingV1beta::Status]
        attr_accessor :error
      
        # Service-specific metadata associated with the operation.  It typically
        # contains progress information and common metadata such as create time.
        # Some services might not provide such metadata.  Any method that returns a
        # long-running operation should document the metadata type, if any.
        # Corresponds to the JSON property `metadata`
        # @return [Hash<String,Object>]
        attr_accessor :metadata
      
        # The server-assigned name, which is only unique within the same service that
        # originally returns it. If you use the default HTTP mapping, the
        # `name` should be a resource name ending with `operations/`unique_id``.
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # The normal response of the operation in case of success.  If the original
        # method returns no data on success, such as `Delete`, the response is
        # `google.protobuf.Empty`.  If the original method is standard
        # `Get`/`Create`/`Update`, the response should be the resource.  For other
        # methods, the response should have the type `XxxResponse`, where `Xxx`
        # is the original method name.  For example, if the original method name
        # is `TakeSnapshot()`, the inferred response type is
        # `TakeSnapshotResponse`.
        # Corresponds to the JSON property `response`
        # @return [Hash<String,Object>]
        attr_accessor :response
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @done = args[:done] if args.key?(:done)
          @error = args[:error] if args.key?(:error)
          @metadata = args[:metadata] if args.key?(:metadata)
          @name = args[:name] if args.key?(:name)
          @response = args[:response] if args.key?(:response)
        end
      end
      
      # A protocol buffer option, which can be attached to a message, field,
      # enumeration, etc.
      class Option
        include Google::Apis::Core::Hashable
      
        # The option's name. For protobuf built-in options (options defined in
        # descriptor.proto), this is the short name. For example, `"map_entry"`.
        # For custom options, it should be the fully-qualified name. For example,
        # `"google.api.http"`.
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # The option's value packed in an Any message. If the value is a primitive,
        # the corresponding wrapper type defined in google/protobuf/wrappers.proto
        # should be used. If the value is an enum, it should be stored as an int32
        # value using the google.protobuf.Int32Value type.
        # Corresponds to the JSON property `value`
        # @return [Hash<String,Object>]
        attr_accessor :value
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @name = args[:name] if args.key?(:name)
          @value = args[:value] if args.key?(:value)
        end
      end
      
      # Represents a documentation page. A page can contain subpages to represent
      # nested documentation set structure.
      class Page
        include Google::Apis::Core::Hashable
      
        # The Markdown content of the page. You can use <code>&#40;== include `path`
        # ==&#41;</code> to include content from a Markdown file.
        # Corresponds to the JSON property `content`
        # @return [String]
        attr_accessor :content
      
        # The name of the page. It will be used as an identity of the page to
        # generate URI of the page, text of the link to this page in navigation,
        # etc. The full page name (start from the root page name to this page
        # concatenated with `.`) can be used as reference to the page in your
        # documentation. For example:
        # <pre><code>pages:
        # - name: Tutorial
        # content: &#40;== include tutorial.md ==&#41;
        # subpages:
        # - name: Java
        # content: &#40;== include tutorial_java.md ==&#41;
        # </code></pre>
        # You can reference `Java` page using Markdown reference link syntax:
        # `Java`.
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # Subpages of this page. The order of subpages specified here will be
        # honored in the generated docset.
        # Corresponds to the JSON property `subpages`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::Page>]
        attr_accessor :subpages
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @content = args[:content] if args.key?(:content)
          @name = args[:name] if args.key?(:name)
          @subpages = args[:subpages] if args.key?(:subpages)
        end
      end
      
      # Quota configuration helps to achieve fairness and budgeting in service
      # usage.
      # The metric based quota configuration works this way:
      # - The service configuration defines a set of metrics.
      # - For API calls, the quota.metric_rules maps methods to metrics with
      # corresponding costs.
      # - The quota.limits defines limits on the metrics, which will be used for
      # quota checks at runtime.
      # An example quota configuration in yaml format:
      # quota:
      # limits:
      # - name: apiWriteQpsPerProject
      # metric: library.googleapis.com/write_calls
      # unit: "1/min/`project`"  # rate limit for consumer projects
      # values:
      # STANDARD: 10000
      # # The metric rules bind all methods to the read_calls metric,
      # # except for the UpdateBook and DeleteBook methods. These two methods
      # # are mapped to the write_calls metric, with the UpdateBook method
      # # consuming at twice rate as the DeleteBook method.
      # metric_rules:
      # - selector: "*"
      # metric_costs:
      # library.googleapis.com/read_calls: 1
      # - selector: google.example.library.v1.LibraryService.UpdateBook
      # metric_costs:
      # library.googleapis.com/write_calls: 2
      # - selector: google.example.library.v1.LibraryService.DeleteBook
      # metric_costs:
      # library.googleapis.com/write_calls: 1
      # Corresponding Metric definition:
      # metrics:
      # - name: library.googleapis.com/read_calls
      # display_name: Read requests
      # metric_kind: DELTA
      # value_type: INT64
      # - name: library.googleapis.com/write_calls
      # display_name: Write requests
      # metric_kind: DELTA
      # value_type: INT64
      class Quota
        include Google::Apis::Core::Hashable
      
        # List of `QuotaLimit` definitions for the service.
        # Corresponds to the JSON property `limits`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::QuotaLimit>]
        attr_accessor :limits
      
        # List of `MetricRule` definitions, each one mapping a selected method to one
        # or more metrics.
        # Corresponds to the JSON property `metricRules`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::MetricRule>]
        attr_accessor :metric_rules
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @limits = args[:limits] if args.key?(:limits)
          @metric_rules = args[:metric_rules] if args.key?(:metric_rules)
        end
      end
      
      # `QuotaLimit` defines a specific limit that applies over a specified duration
      # for a limit type. There can be at most one limit for a duration and limit
      # type combination defined within a `QuotaGroup`.
      class QuotaLimit
        include Google::Apis::Core::Hashable
      
        # Default number of tokens that can be consumed during the specified
        # duration. This is the number of tokens assigned when a client
        # application developer activates the service for his/her project.
        # Specifying a value of 0 will block all requests. This can be used if you
        # are provisioning quota to selected consumers and blocking others.
        # Similarly, a value of -1 will indicate an unlimited quota. No other
        # negative values are allowed.
        # Used by group-based quotas only.
        # Corresponds to the JSON property `defaultLimit`
        # @return [Fixnum]
        attr_accessor :default_limit
      
        # Optional. User-visible, extended description for this quota limit.
        # Should be used only when more context is needed to understand this limit
        # than provided by the limit's display name (see: `display_name`).
        # Corresponds to the JSON property `description`
        # @return [String]
        attr_accessor :description
      
        # User-visible display name for this limit.
        # Optional. If not set, the UI will provide a default display name based on
        # the quota configuration. This field can be used to override the default
        # display name generated from the configuration.
        # Corresponds to the JSON property `displayName`
        # @return [String]
        attr_accessor :display_name
      
        # Duration of this limit in textual notation. Must be "100s" or "1d".
        # Used by group-based quotas only.
        # Corresponds to the JSON property `duration`
        # @return [String]
        attr_accessor :duration
      
        # Free tier value displayed in the Developers Console for this limit.
        # The free tier is the number of tokens that will be subtracted from the
        # billed amount when billing is enabled.
        # This field can only be set on a limit with duration "1d", in a billable
        # group; it is invalid on any other limit. If this field is not set, it
        # defaults to 0, indicating that there is no free tier for this service.
        # Used by group-based quotas only.
        # Corresponds to the JSON property `freeTier`
        # @return [Fixnum]
        attr_accessor :free_tier
      
        # Maximum number of tokens that can be consumed during the specified
        # duration. Client application developers can override the default limit up
        # to this maximum. If specified, this value cannot be set to a value less
        # than the default limit. If not specified, it is set to the default limit.
        # To allow clients to apply overrides with no upper bound, set this to -1,
        # indicating unlimited maximum quota.
        # Used by group-based quotas only.
        # Corresponds to the JSON property `maxLimit`
        # @return [Fixnum]
        attr_accessor :max_limit
      
        # The name of the metric this quota limit applies to. The quota limits with
        # the same metric will be checked together during runtime. The metric must be
        # defined within the service config.
        # Corresponds to the JSON property `metric`
        # @return [String]
        attr_accessor :metric
      
        # Name of the quota limit.
        # The name must be provided, and it must be unique within the service. The
        # name can only include alphanumeric characters as well as '-'.
        # The maximum length of the limit name is 64 characters.
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # Specify the unit of the quota limit. It uses the same syntax as
        # Metric.unit. The supported unit kinds are determined by the quota
        # backend system.
        # Here are some examples:
        # * "1/min/`project`" for quota per minute per project.
        # Note: the order of unit components is insignificant.
        # The "1" at the beginning is required to follow the metric unit syntax.
        # Corresponds to the JSON property `unit`
        # @return [String]
        attr_accessor :unit
      
        # Tiered limit values. You must specify this as a key:value pair, with an
        # integer value that is the maximum number of requests allowed for the
        # specified unit. Currently only STANDARD is supported.
        # Corresponds to the JSON property `values`
        # @return [Hash<String,Fixnum>]
        attr_accessor :values
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @default_limit = args[:default_limit] if args.key?(:default_limit)
          @description = args[:description] if args.key?(:description)
          @display_name = args[:display_name] if args.key?(:display_name)
          @duration = args[:duration] if args.key?(:duration)
          @free_tier = args[:free_tier] if args.key?(:free_tier)
          @max_limit = args[:max_limit] if args.key?(:max_limit)
          @metric = args[:metric] if args.key?(:metric)
          @name = args[:name] if args.key?(:name)
          @unit = args[:unit] if args.key?(:unit)
          @values = args[:values] if args.key?(:values)
        end
      end
      
      # Represents a found unused range.
      class Range
        include Google::Apis::Core::Hashable
      
        # CIDR range in "10.x.x.x/y" format that is within the
        # allocated ranges and currently unused.
        # Corresponds to the JSON property `ipCidrRange`
        # @return [String]
        attr_accessor :ip_cidr_range
      
        # In the Shared VPC host project, the VPC network that's peered with the
        # consumer network. For example:
        # `projects/1234321/global/networks/host-network`
        # Corresponds to the JSON property `network`
        # @return [String]
        attr_accessor :network
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @ip_cidr_range = args[:ip_cidr_range] if args.key?(:ip_cidr_range)
          @network = args[:network] if args.key?(:network)
        end
      end
      
      # Request to search for an unused range within allocated ranges.
      class SearchRangeRequest
        include Google::Apis::Core::Hashable
      
        # Required. The prefix length of the IP range.
        # Use usual CIDR range notation.
        # For example, '30' to find unused x.x.x.x/30 CIDR range.
        # Actual range will be determined using allocated range for the consumer
        # peered network and returned in the result.
        # Corresponds to the JSON property `ipPrefixLength`
        # @return [Fixnum]
        attr_accessor :ip_prefix_length
      
        # Network name in the consumer project.   This network must have been
        # already peered with a shared VPC network using CreateConnection
        # method.
        # Must be in a form 'projects/`project`/global/networks/`network`'.
        # `project` is a project number, as in '12345'
        # `network` is network name.
        # Corresponds to the JSON property `network`
        # @return [String]
        attr_accessor :network
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @ip_prefix_length = args[:ip_prefix_length] if args.key?(:ip_prefix_length)
          @network = args[:network] if args.key?(:network)
        end
      end
      
      # `Service` is the root object of Google service configuration schema. It
      # describes basic information about a service, such as the name and the
      # title, and delegates other aspects to sub-sections. Each sub-section is
      # either a proto message or a repeated proto message that configures a
      # specific aspect, such as auth. See each proto message definition for details.
      # Example:
      # type: google.api.Service
      # config_version: 3
      # name: calendar.googleapis.com
      # title: Google Calendar API
      # apis:
      # - name: google.calendar.v3.Calendar
      # authentication:
      # providers:
      # - id: google_calendar_auth
      # jwks_uri: https://www.googleapis.com/oauth2/v1/certs
      # issuer: https://securetoken.google.com
      # rules:
      # - selector: "*"
      # requirements:
      # provider_id: google_calendar_auth
      class Service
        include Google::Apis::Core::Hashable
      
        # A list of API interfaces exported by this service. Only the `name` field
        # of the google.protobuf.Api needs to be provided by the configuration
        # author, as the remaining fields will be derived from the IDL during the
        # normalization process. It is an error to specify an API interface here
        # which cannot be resolved against the associated IDL files.
        # Corresponds to the JSON property `apis`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::Api>]
        attr_accessor :apis
      
        # `Authentication` defines the authentication configuration for an API.
        # Example for an API targeted for external use:
        # name: calendar.googleapis.com
        # authentication:
        # providers:
        # - id: google_calendar_auth
        # jwks_uri: https://www.googleapis.com/oauth2/v1/certs
        # issuer: https://securetoken.google.com
        # rules:
        # - selector: "*"
        # requirements:
        # provider_id: google_calendar_auth
        # Corresponds to the JSON property `authentication`
        # @return [Google::Apis::ServicenetworkingV1beta::Authentication]
        attr_accessor :authentication
      
        # `Backend` defines the backend configuration for a service.
        # Corresponds to the JSON property `backend`
        # @return [Google::Apis::ServicenetworkingV1beta::Backend]
        attr_accessor :backend
      
        # Billing related configuration of the service.
        # The following example shows how to configure monitored resources and metrics
        # for billing:
        # monitored_resources:
        # - type: library.googleapis.com/branch
        # labels:
        # - key: /city
        # description: The city where the library branch is located in.
        # - key: /name
        # description: The name of the branch.
        # metrics:
        # - name: library.googleapis.com/book/borrowed_count
        # metric_kind: DELTA
        # value_type: INT64
        # billing:
        # consumer_destinations:
        # - monitored_resource: library.googleapis.com/branch
        # metrics:
        # - library.googleapis.com/book/borrowed_count
        # Corresponds to the JSON property `billing`
        # @return [Google::Apis::ServicenetworkingV1beta::Billing]
        attr_accessor :billing
      
        # The semantic version of the service configuration. The config version
        # affects the interpretation of the service configuration. For example,
        # certain features are enabled by default for certain config versions.
        # The latest config version is `3`.
        # Corresponds to the JSON property `configVersion`
        # @return [Fixnum]
        attr_accessor :config_version
      
        # `Context` defines which contexts an API requests.
        # Example:
        # context:
        # rules:
        # - selector: "*"
        # requested:
        # - google.rpc.context.ProjectContext
        # - google.rpc.context.OriginContext
        # The above specifies that all methods in the API request
        # `google.rpc.context.ProjectContext` and
        # `google.rpc.context.OriginContext`.
        # Available context types are defined in package
        # `google.rpc.context`.
        # This also provides mechanism to whitelist any protobuf message extension that
        # can be sent in grpc metadata using “x-goog-ext-<extension_id>-bin” and
        # “x-goog-ext-<extension_id>-jspb” format. For example, list any service
        # specific protobuf types that can appear in grpc metadata as follows in your
        # yaml file:
        # Example:
        # context:
        # rules:
        # - selector: "google.example.library.v1.LibraryService.CreateBook"
        # allowed_request_extensions:
        # - google.foo.v1.NewExtension
        # allowed_response_extensions:
        # - google.foo.v1.NewExtension
        # You can also specify extension ID instead of fully qualified extension name
        # here.
        # Corresponds to the JSON property `context`
        # @return [Google::Apis::ServicenetworkingV1beta::Context]
        attr_accessor :context
      
        # Selects and configures the service controller used by the service.  The
        # service controller handles features like abuse, quota, billing, logging,
        # monitoring, etc.
        # Corresponds to the JSON property `control`
        # @return [Google::Apis::ServicenetworkingV1beta::Control]
        attr_accessor :control
      
        # Customize service error responses.  For example, list any service
        # specific protobuf types that can appear in error detail lists of
        # error responses.
        # Example:
        # custom_error:
        # types:
        # - google.foo.v1.CustomError
        # - google.foo.v1.AnotherError
        # Corresponds to the JSON property `customError`
        # @return [Google::Apis::ServicenetworkingV1beta::CustomError]
        attr_accessor :custom_error
      
        # `Documentation` provides the information for describing a service.
        # Example:
        # <pre><code>documentation:
        # summary: >
        # The Google Calendar API gives access
        # to most calendar features.
        # pages:
        # - name: Overview
        # content: &#40;== include google/foo/overview.md ==&#41;
        # - name: Tutorial
        # content: &#40;== include google/foo/tutorial.md ==&#41;
        # subpages;
        # - name: Java
        # content: &#40;== include google/foo/tutorial_java.md ==&#41;
        # rules:
        # - selector: google.calendar.Calendar.Get
        # description: >
        # ...
        # - selector: google.calendar.Calendar.Put
        # description: >
        # ...
        # </code></pre>
        # Documentation is provided in markdown syntax. In addition to
        # standard markdown features, definition lists, tables and fenced
        # code blocks are supported. Section headers can be provided and are
        # interpreted relative to the section nesting of the context where
        # a documentation fragment is embedded.
        # Documentation from the IDL is merged with documentation defined
        # via the config at normalization time, where documentation provided
        # by config rules overrides IDL provided.
        # A number of constructs specific to the API platform are supported
        # in documentation text.
        # In order to reference a proto element, the following
        # notation can be used:
        # <pre><code>&#91;fully.qualified.proto.name]&#91;]</code></pre>
        # To override the display text used for the link, this can be used:
        # <pre><code>&#91;display text]&#91;fully.qualified.proto.name]</code></pre>
        # Text can be excluded from doc using the following notation:
        # <pre><code>&#40;-- internal comment --&#41;</code></pre>
        # A few directives are available in documentation. Note that
        # directives must appear on a single line to be properly
        # identified. The `include` directive includes a markdown file from
        # an external source:
        # <pre><code>&#40;== include path/to/file ==&#41;</code></pre>
        # The `resource_for` directive marks a message to be the resource of
        # a collection in REST view. If it is not specified, tools attempt
        # to infer the resource from the operations in a collection:
        # <pre><code>&#40;== resource_for v1.shelves.books ==&#41;</code></pre>
        # The directive `suppress_warning` does not directly affect documentation
        # and is documented together with service config validation.
        # Corresponds to the JSON property `documentation`
        # @return [Google::Apis::ServicenetworkingV1beta::Documentation]
        attr_accessor :documentation
      
        # Configuration for network endpoints.  If this is empty, then an endpoint
        # with the same name as the service is automatically generated to service all
        # defined APIs.
        # Corresponds to the JSON property `endpoints`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::Endpoint>]
        attr_accessor :endpoints
      
        # A list of all enum types included in this API service.  Enums
        # referenced directly or indirectly by the `apis` are automatically
        # included.  Enums which are not referenced but shall be included
        # should be listed here by name. Example:
        # enums:
        # - name: google.someapi.v1.SomeEnum
        # Corresponds to the JSON property `enums`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::Enum>]
        attr_accessor :enums
      
        # Defines the HTTP configuration for an API service. It contains a list of
        # HttpRule, each specifying the mapping of an RPC method
        # to one or more HTTP REST API methods.
        # Corresponds to the JSON property `http`
        # @return [Google::Apis::ServicenetworkingV1beta::Http]
        attr_accessor :http
      
        # A unique ID for a specific instance of this message, typically assigned
        # by the client for tracking purpose. Must be no longer than 63 characters
        # and only lower case letters, digits, '.', '_' and '-' are allowed. If
        # empty, the server may choose to generate one instead.
        # Corresponds to the JSON property `id`
        # @return [String]
        attr_accessor :id
      
        # Logging configuration of the service.
        # The following example shows how to configure logs to be sent to the
        # producer and consumer projects. In the example, the `activity_history`
        # log is sent to both the producer and consumer projects, whereas the
        # `purchase_history` log is only sent to the producer project.
        # monitored_resources:
        # - type: library.googleapis.com/branch
        # labels:
        # - key: /city
        # description: The city where the library branch is located in.
        # - key: /name
        # description: The name of the branch.
        # logs:
        # - name: activity_history
        # labels:
        # - key: /customer_id
        # - name: purchase_history
        # logging:
        # producer_destinations:
        # - monitored_resource: library.googleapis.com/branch
        # logs:
        # - activity_history
        # - purchase_history
        # consumer_destinations:
        # - monitored_resource: library.googleapis.com/branch
        # logs:
        # - activity_history
        # Corresponds to the JSON property `logging`
        # @return [Google::Apis::ServicenetworkingV1beta::Logging]
        attr_accessor :logging
      
        # Defines the logs used by this service.
        # Corresponds to the JSON property `logs`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::LogDescriptor>]
        attr_accessor :logs
      
        # Defines the metrics used by this service.
        # Corresponds to the JSON property `metrics`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::MetricDescriptor>]
        attr_accessor :metrics
      
        # Defines the monitored resources used by this service. This is required
        # by the Service.monitoring and Service.logging configurations.
        # Corresponds to the JSON property `monitoredResources`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::MonitoredResourceDescriptor>]
        attr_accessor :monitored_resources
      
        # Monitoring configuration of the service.
        # The example below shows how to configure monitored resources and metrics
        # for monitoring. In the example, a monitored resource and two metrics are
        # defined. The `library.googleapis.com/book/returned_count` metric is sent
        # to both producer and consumer projects, whereas the
        # `library.googleapis.com/book/overdue_count` metric is only sent to the
        # consumer project.
        # monitored_resources:
        # - type: library.googleapis.com/branch
        # labels:
        # - key: /city
        # description: The city where the library branch is located in.
        # - key: /name
        # description: The name of the branch.
        # metrics:
        # - name: library.googleapis.com/book/returned_count
        # metric_kind: DELTA
        # value_type: INT64
        # labels:
        # - key: /customer_id
        # - name: library.googleapis.com/book/overdue_count
        # metric_kind: GAUGE
        # value_type: INT64
        # labels:
        # - key: /customer_id
        # monitoring:
        # producer_destinations:
        # - monitored_resource: library.googleapis.com/branch
        # metrics:
        # - library.googleapis.com/book/returned_count
        # consumer_destinations:
        # - monitored_resource: library.googleapis.com/branch
        # metrics:
        # - library.googleapis.com/book/returned_count
        # - library.googleapis.com/book/overdue_count
        # Corresponds to the JSON property `monitoring`
        # @return [Google::Apis::ServicenetworkingV1beta::Monitoring]
        attr_accessor :monitoring
      
        # The service name, which is a DNS-like logical identifier for the
        # service, such as `calendar.googleapis.com`. The service name
        # typically goes through DNS verification to make sure the owner
        # of the service also owns the DNS name.
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # The Google project that owns this service.
        # Corresponds to the JSON property `producerProjectId`
        # @return [String]
        attr_accessor :producer_project_id
      
        # Quota configuration helps to achieve fairness and budgeting in service
        # usage.
        # The metric based quota configuration works this way:
        # - The service configuration defines a set of metrics.
        # - For API calls, the quota.metric_rules maps methods to metrics with
        # corresponding costs.
        # - The quota.limits defines limits on the metrics, which will be used for
        # quota checks at runtime.
        # An example quota configuration in yaml format:
        # quota:
        # limits:
        # - name: apiWriteQpsPerProject
        # metric: library.googleapis.com/write_calls
        # unit: "1/min/`project`"  # rate limit for consumer projects
        # values:
        # STANDARD: 10000
        # # The metric rules bind all methods to the read_calls metric,
        # # except for the UpdateBook and DeleteBook methods. These two methods
        # # are mapped to the write_calls metric, with the UpdateBook method
        # # consuming at twice rate as the DeleteBook method.
        # metric_rules:
        # - selector: "*"
        # metric_costs:
        # library.googleapis.com/read_calls: 1
        # - selector: google.example.library.v1.LibraryService.UpdateBook
        # metric_costs:
        # library.googleapis.com/write_calls: 2
        # - selector: google.example.library.v1.LibraryService.DeleteBook
        # metric_costs:
        # library.googleapis.com/write_calls: 1
        # Corresponding Metric definition:
        # metrics:
        # - name: library.googleapis.com/read_calls
        # display_name: Read requests
        # metric_kind: DELTA
        # value_type: INT64
        # - name: library.googleapis.com/write_calls
        # display_name: Write requests
        # metric_kind: DELTA
        # value_type: INT64
        # Corresponds to the JSON property `quota`
        # @return [Google::Apis::ServicenetworkingV1beta::Quota]
        attr_accessor :quota
      
        # Source information used to create a Service Config
        # Corresponds to the JSON property `sourceInfo`
        # @return [Google::Apis::ServicenetworkingV1beta::SourceInfo]
        attr_accessor :source_info
      
        # ### System parameter configuration
        # A system parameter is a special kind of parameter defined by the API
        # system, not by an individual API. It is typically mapped to an HTTP header
        # and/or a URL query parameter. This configuration specifies which methods
        # change the names of the system parameters.
        # Corresponds to the JSON property `systemParameters`
        # @return [Google::Apis::ServicenetworkingV1beta::SystemParameters]
        attr_accessor :system_parameters
      
        # A list of all proto message types included in this API service.
        # It serves similar purpose as [google.api.Service.types], except that
        # these types are not needed by user-defined APIs. Therefore, they will not
        # show up in the generated discovery doc. This field should only be used
        # to define system APIs in ESF.
        # Corresponds to the JSON property `systemTypes`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::Type>]
        attr_accessor :system_types
      
        # The product title for this service.
        # Corresponds to the JSON property `title`
        # @return [String]
        attr_accessor :title
      
        # A list of all proto message types included in this API service.
        # Types referenced directly or indirectly by the `apis` are
        # automatically included.  Messages which are not referenced but
        # shall be included, such as types used by the `google.protobuf.Any` type,
        # should be listed here by name. Example:
        # types:
        # - name: google.protobuf.Int32
        # Corresponds to the JSON property `types`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::Type>]
        attr_accessor :types
      
        # Configuration controlling usage of a service.
        # Corresponds to the JSON property `usage`
        # @return [Google::Apis::ServicenetworkingV1beta::Usage]
        attr_accessor :usage
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @apis = args[:apis] if args.key?(:apis)
          @authentication = args[:authentication] if args.key?(:authentication)
          @backend = args[:backend] if args.key?(:backend)
          @billing = args[:billing] if args.key?(:billing)
          @config_version = args[:config_version] if args.key?(:config_version)
          @context = args[:context] if args.key?(:context)
          @control = args[:control] if args.key?(:control)
          @custom_error = args[:custom_error] if args.key?(:custom_error)
          @documentation = args[:documentation] if args.key?(:documentation)
          @endpoints = args[:endpoints] if args.key?(:endpoints)
          @enums = args[:enums] if args.key?(:enums)
          @http = args[:http] if args.key?(:http)
          @id = args[:id] if args.key?(:id)
          @logging = args[:logging] if args.key?(:logging)
          @logs = args[:logs] if args.key?(:logs)
          @metrics = args[:metrics] if args.key?(:metrics)
          @monitored_resources = args[:monitored_resources] if args.key?(:monitored_resources)
          @monitoring = args[:monitoring] if args.key?(:monitoring)
          @name = args[:name] if args.key?(:name)
          @producer_project_id = args[:producer_project_id] if args.key?(:producer_project_id)
          @quota = args[:quota] if args.key?(:quota)
          @source_info = args[:source_info] if args.key?(:source_info)
          @system_parameters = args[:system_parameters] if args.key?(:system_parameters)
          @system_types = args[:system_types] if args.key?(:system_types)
          @title = args[:title] if args.key?(:title)
          @types = args[:types] if args.key?(:types)
          @usage = args[:usage] if args.key?(:usage)
        end
      end
      
      # The per-product per-project service identity for a service.
      # Use this field to configure per-product per-project service identity.
      # Example of a service identity configuration.
      # usage:
      # service_identity:
      # - service_account_parent: "projects/123456789"
      # display_name: "Cloud XXX Service Agent"
      # description: "Used as the identity of Cloud XXX to access resources"
      class ServiceIdentity
        include Google::Apis::Core::Hashable
      
        # Optional. A user-specified opaque description of the service account.
        # Must be less than or equal to 256 UTF-8 bytes.
        # Corresponds to the JSON property `description`
        # @return [String]
        attr_accessor :description
      
        # Optional. A user-specified name for the service account.
        # Must be less than or equal to 100 UTF-8 bytes.
        # Corresponds to the JSON property `displayName`
        # @return [String]
        attr_accessor :display_name
      
        # A service account project that hosts the service accounts.
        # An example name would be:
        # `projects/123456789`
        # Corresponds to the JSON property `serviceAccountParent`
        # @return [String]
        attr_accessor :service_account_parent
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @description = args[:description] if args.key?(:description)
          @display_name = args[:display_name] if args.key?(:display_name)
          @service_account_parent = args[:service_account_parent] if args.key?(:service_account_parent)
        end
      end
      
      # `SourceContext` represents information about the source of a
      # protobuf element, like the file in which it is defined.
      class SourceContext
        include Google::Apis::Core::Hashable
      
        # The path-qualified name of the .proto file that contained the associated
        # protobuf element.  For example: `"google/protobuf/source_context.proto"`.
        # Corresponds to the JSON property `fileName`
        # @return [String]
        attr_accessor :file_name
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @file_name = args[:file_name] if args.key?(:file_name)
        end
      end
      
      # Source information used to create a Service Config
      class SourceInfo
        include Google::Apis::Core::Hashable
      
        # All files used during config generation.
        # Corresponds to the JSON property `sourceFiles`
        # @return [Array<Hash<String,Object>>]
        attr_accessor :source_files
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @source_files = args[:source_files] if args.key?(:source_files)
        end
      end
      
      # The `Status` type defines a logical error model that is suitable for
      # different programming environments, including REST APIs and RPC APIs. It is
      # used by [gRPC](https://github.com/grpc). Each `Status` message contains
      # three pieces of data: error code, error message, and error details.
      # You can find out more about this error model and how to work with it in the
      # [API Design Guide](https://cloud.google.com/apis/design/errors).
      class Status
        include Google::Apis::Core::Hashable
      
        # The status code, which should be an enum value of google.rpc.Code.
        # Corresponds to the JSON property `code`
        # @return [Fixnum]
        attr_accessor :code
      
        # A list of messages that carry the error details.  There is a common set of
        # message types for APIs to use.
        # Corresponds to the JSON property `details`
        # @return [Array<Hash<String,Object>>]
        attr_accessor :details
      
        # A developer-facing error message, which should be in English. Any
        # user-facing error message should be localized and sent in the
        # google.rpc.Status.details field, or localized by the client.
        # Corresponds to the JSON property `message`
        # @return [String]
        attr_accessor :message
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @code = args[:code] if args.key?(:code)
          @details = args[:details] if args.key?(:details)
          @message = args[:message] if args.key?(:message)
        end
      end
      
      # Represents a subnet that was created or discovered by a private access
      # management service.
      class Subnetwork
        include Google::Apis::Core::Hashable
      
        # Subnetwork CIDR range in `10.x.x.x/y` format.
        # Corresponds to the JSON property `ipCidrRange`
        # @return [String]
        attr_accessor :ip_cidr_range
      
        # Subnetwork name.
        # See https://cloud.google.com/compute/docs/vpc/
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # In the Shared VPC host project, the VPC network that's peered with the
        # consumer network. For example:
        # `projects/1234321/global/networks/host-network`
        # Corresponds to the JSON property `network`
        # @return [String]
        attr_accessor :network
      
        # This is a discovered subnet that is not within the current consumer
        # allocated ranges.
        # Corresponds to the JSON property `outsideAllocation`
        # @return [Boolean]
        attr_accessor :outside_allocation
        alias_method :outside_allocation?, :outside_allocation
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @ip_cidr_range = args[:ip_cidr_range] if args.key?(:ip_cidr_range)
          @name = args[:name] if args.key?(:name)
          @network = args[:network] if args.key?(:network)
          @outside_allocation = args[:outside_allocation] if args.key?(:outside_allocation)
        end
      end
      
      # Define a parameter's name and location. The parameter may be passed as either
      # an HTTP header or a URL query parameter, and if both are passed the behavior
      # is implementation-dependent.
      class SystemParameter
        include Google::Apis::Core::Hashable
      
        # Define the HTTP header name to use for the parameter. It is case
        # insensitive.
        # Corresponds to the JSON property `httpHeader`
        # @return [String]
        attr_accessor :http_header
      
        # Define the name of the parameter, such as "api_key" . It is case sensitive.
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # Define the URL query parameter name to use for the parameter. It is case
        # sensitive.
        # Corresponds to the JSON property `urlQueryParameter`
        # @return [String]
        attr_accessor :url_query_parameter
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @http_header = args[:http_header] if args.key?(:http_header)
          @name = args[:name] if args.key?(:name)
          @url_query_parameter = args[:url_query_parameter] if args.key?(:url_query_parameter)
        end
      end
      
      # Define a system parameter rule mapping system parameter definitions to
      # methods.
      class SystemParameterRule
        include Google::Apis::Core::Hashable
      
        # Define parameters. Multiple names may be defined for a parameter.
        # For a given method call, only one of them should be used. If multiple
        # names are used the behavior is implementation-dependent.
        # If none of the specified names are present the behavior is
        # parameter-dependent.
        # Corresponds to the JSON property `parameters`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::SystemParameter>]
        attr_accessor :parameters
      
        # Selects the methods to which this rule applies. Use '*' to indicate all
        # methods in all APIs.
        # Refer to selector for syntax details.
        # Corresponds to the JSON property `selector`
        # @return [String]
        attr_accessor :selector
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @parameters = args[:parameters] if args.key?(:parameters)
          @selector = args[:selector] if args.key?(:selector)
        end
      end
      
      # ### System parameter configuration
      # A system parameter is a special kind of parameter defined by the API
      # system, not by an individual API. It is typically mapped to an HTTP header
      # and/or a URL query parameter. This configuration specifies which methods
      # change the names of the system parameters.
      class SystemParameters
        include Google::Apis::Core::Hashable
      
        # Define system parameters.
        # The parameters defined here will override the default parameters
        # implemented by the system. If this field is missing from the service
        # config, default system parameters will be used. Default system parameters
        # and names is implementation-dependent.
        # Example: define api key for all methods
        # system_parameters
        # rules:
        # - selector: "*"
        # parameters:
        # - name: api_key
        # url_query_parameter: api_key
        # Example: define 2 api key names for a specific method.
        # system_parameters
        # rules:
        # - selector: "/ListShelves"
        # parameters:
        # - name: api_key
        # http_header: Api-Key1
        # - name: api_key
        # http_header: Api-Key2
        # **NOTE:** All service configuration rules follow "last one wins" order.
        # Corresponds to the JSON property `rules`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::SystemParameterRule>]
        attr_accessor :rules
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @rules = args[:rules] if args.key?(:rules)
        end
      end
      
      # A protocol buffer message type.
      class Type
        include Google::Apis::Core::Hashable
      
        # The list of fields.
        # Corresponds to the JSON property `fields`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::Field>]
        attr_accessor :fields
      
        # The fully qualified message name.
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # The list of types appearing in `oneof` definitions in this type.
        # Corresponds to the JSON property `oneofs`
        # @return [Array<String>]
        attr_accessor :oneofs
      
        # The protocol buffer options.
        # Corresponds to the JSON property `options`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::Option>]
        attr_accessor :options
      
        # `SourceContext` represents information about the source of a
        # protobuf element, like the file in which it is defined.
        # Corresponds to the JSON property `sourceContext`
        # @return [Google::Apis::ServicenetworkingV1beta::SourceContext]
        attr_accessor :source_context
      
        # The source syntax.
        # Corresponds to the JSON property `syntax`
        # @return [String]
        attr_accessor :syntax
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @fields = args[:fields] if args.key?(:fields)
          @name = args[:name] if args.key?(:name)
          @oneofs = args[:oneofs] if args.key?(:oneofs)
          @options = args[:options] if args.key?(:options)
          @source_context = args[:source_context] if args.key?(:source_context)
          @syntax = args[:syntax] if args.key?(:syntax)
        end
      end
      
      # Configuration controlling usage of a service.
      class Usage
        include Google::Apis::Core::Hashable
      
        # The full resource name of a channel used for sending notifications to the
        # service producer.
        # Google Service Management currently only supports
        # [Google Cloud Pub/Sub](https://cloud.google.com/pubsub) as a notification
        # channel. To use Google Cloud Pub/Sub as the channel, this must be the name
        # of a Cloud Pub/Sub topic that uses the Cloud Pub/Sub topic name format
        # documented in https://cloud.google.com/pubsub/docs/overview.
        # Corresponds to the JSON property `producerNotificationChannel`
        # @return [String]
        attr_accessor :producer_notification_channel
      
        # Requirements that must be satisfied before a consumer project can use the
        # service. Each requirement is of the form <service.name>/<requirement-id>;
        # for example 'serviceusage.googleapis.com/billing-enabled'.
        # Corresponds to the JSON property `requirements`
        # @return [Array<String>]
        attr_accessor :requirements
      
        # A list of usage rules that apply to individual API methods.
        # **NOTE:** All service configuration rules follow "last one wins" order.
        # Corresponds to the JSON property `rules`
        # @return [Array<Google::Apis::ServicenetworkingV1beta::UsageRule>]
        attr_accessor :rules
      
        # The per-product per-project service identity for a service.
        # Use this field to configure per-product per-project service identity.
        # Example of a service identity configuration.
        # usage:
        # service_identity:
        # - service_account_parent: "projects/123456789"
        # display_name: "Cloud XXX Service Agent"
        # description: "Used as the identity of Cloud XXX to access resources"
        # Corresponds to the JSON property `serviceIdentity`
        # @return [Google::Apis::ServicenetworkingV1beta::ServiceIdentity]
        attr_accessor :service_identity
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @producer_notification_channel = args[:producer_notification_channel] if args.key?(:producer_notification_channel)
          @requirements = args[:requirements] if args.key?(:requirements)
          @rules = args[:rules] if args.key?(:rules)
          @service_identity = args[:service_identity] if args.key?(:service_identity)
        end
      end
      
      # Usage configuration rules for the service.
      # NOTE: Under development.
      # Use this rule to configure unregistered calls for the service. Unregistered
      # calls are calls that do not contain consumer project identity.
      # (Example: calls that do not contain an API key).
      # By default, API methods do not allow unregistered calls, and each method call
      # must be identified by a consumer project identity. Use this rule to
      # allow/disallow unregistered calls.
      # Example of an API that wants to allow unregistered calls for entire service.
      # usage:
      # rules:
      # - selector: "*"
      # allow_unregistered_calls: true
      # Example of a method that wants to allow unregistered calls.
      # usage:
      # rules:
      # - selector: "google.example.library.v1.LibraryService.CreateBook"
      # allow_unregistered_calls: true
      class UsageRule
        include Google::Apis::Core::Hashable
      
        # If true, the selected method allows unregistered calls, e.g. calls
        # that don't identify any user or application.
        # Corresponds to the JSON property `allowUnregisteredCalls`
        # @return [Boolean]
        attr_accessor :allow_unregistered_calls
        alias_method :allow_unregistered_calls?, :allow_unregistered_calls
      
        # Selects the methods to which this rule applies. Use '*' to indicate all
        # methods in all APIs.
        # Refer to selector for syntax details.
        # Corresponds to the JSON property `selector`
        # @return [String]
        attr_accessor :selector
      
        # If true, the selected method should skip service control and the control
        # plane features, such as quota and billing, will not be available.
        # This flag is used by Google Cloud Endpoints to bypass checks for internal
        # methods, such as service health check methods.
        # Corresponds to the JSON property `skipServiceControl`
        # @return [Boolean]
        attr_accessor :skip_service_control
        alias_method :skip_service_control?, :skip_service_control
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @allow_unregistered_calls = args[:allow_unregistered_calls] if args.key?(:allow_unregistered_calls)
          @selector = args[:selector] if args.key?(:selector)
          @skip_service_control = args[:skip_service_control] if args.key?(:skip_service_control)
        end
      end
    end
  end
end