# Copyright 2020 Google LLC # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. require 'date' require 'google/apis/core/base_service' require 'google/apis/core/json_representation' require 'google/apis/core/hashable' require 'google/apis/errors' module Google module Apis module CloudassetV1 # Specifies roles and/or permissions to analyze, to determine both the # identities possessing them and the resources they control. If multiple values # are specified, results will include roles or permissions matching any of them. # The total number of roles and permissions should be equal or less than 10. class AccessSelector include Google::Apis::Core::Hashable # Optional. The permissions to appear in result. # Corresponds to the JSON property `permissions` # @return [Array] attr_accessor :permissions # Optional. The roles to appear in result. # Corresponds to the JSON property `roles` # @return [Array] attr_accessor :roles def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @permissions = args[:permissions] if args.key?(:permissions) @roles = args[:roles] if args.key?(:roles) end end # A request message for AssetService.AnalyzeIamPolicyLongrunning. class AnalyzeIamPolicyLongrunningRequest include Google::Apis::Core::Hashable # ## LINT.IfChange Keep in sync with ## logs/proto/cloud_asset_inventory/ # iam_policy_analyzer_log.proto IAM policy analysis query message. # Corresponds to the JSON property `analysisQuery` # @return [Google::Apis::CloudassetV1::IamPolicyAnalysisQuery] attr_accessor :analysis_query # Output configuration for export IAM policy analysis destination. # Corresponds to the JSON property `outputConfig` # @return [Google::Apis::CloudassetV1::IamPolicyAnalysisOutputConfig] attr_accessor :output_config def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @analysis_query = args[:analysis_query] if args.key?(:analysis_query) @output_config = args[:output_config] if args.key?(:output_config) end end # A response message for AssetService.AnalyzeIamPolicy. class AnalyzeIamPolicyResponse include Google::Apis::Core::Hashable # Represents whether all entries in the main_analysis and # service_account_impersonation_analysis have been fully explored to answer the # query in the request. # Corresponds to the JSON property `fullyExplored` # @return [Boolean] attr_accessor :fully_explored alias_method :fully_explored?, :fully_explored # An analysis message to group the query and results. # Corresponds to the JSON property `mainAnalysis` # @return [Google::Apis::CloudassetV1::IamPolicyAnalysis] attr_accessor :main_analysis # The service account impersonation analysis if AnalyzeIamPolicyRequest. # analyze_service_account_impersonation is enabled. # Corresponds to the JSON property `serviceAccountImpersonationAnalysis` # @return [Array] attr_accessor :service_account_impersonation_analysis def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @fully_explored = args[:fully_explored] if args.key?(:fully_explored) @main_analysis = args[:main_analysis] if args.key?(:main_analysis) @service_account_impersonation_analysis = args[:service_account_impersonation_analysis] if args.key?(:service_account_impersonation_analysis) end end # An asset in Google Cloud. An asset can be any resource in the Google Cloud [ # resource hierarchy](https://cloud.google.com/resource-manager/docs/cloud- # platform-resource-hierarchy), a resource outside the Google Cloud resource # hierarchy (such as Google Kubernetes Engine clusters and objects), or a policy # (e.g. Cloud IAM policy). See [Supported asset types](https://cloud.google.com/ # asset-inventory/docs/supported-asset-types) for more information. class Asset include Google::Apis::Core::Hashable # An `AccessLevel` is a label that can be applied to requests to Google Cloud # services, along with a list of requirements necessary for the label to be # applied. # Corresponds to the JSON property `accessLevel` # @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1AccessLevel] attr_accessor :access_level # `AccessPolicy` is a container for `AccessLevels` (which define the necessary # attributes to use Google Cloud services) and `ServicePerimeters` (which define # regions of services able to freely pass data within a perimeter). An access # policy is globally visible within an organization, and the restrictions it # specifies apply to all projects within an organization. # Corresponds to the JSON property `accessPolicy` # @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1AccessPolicy] attr_accessor :access_policy # The ancestry path of an asset in Google Cloud [resource hierarchy](https:// # cloud.google.com/resource-manager/docs/cloud-platform-resource-hierarchy), # represented as a list of relative resource names. An ancestry path starts with # the closest ancestor in the hierarchy and ends at root. If the asset is a # project, folder, or organization, the ancestry path starts from the asset # itself. Example: `["projects/123456789", "folders/5432", "organizations/1234"]` # Corresponds to the JSON property `ancestors` # @return [Array] attr_accessor :ancestors # The type of the asset. Example: `compute.googleapis.com/Disk` See [Supported # asset types](https://cloud.google.com/asset-inventory/docs/supported-asset- # types) for more information. # Corresponds to the JSON property `assetType` # @return [String] attr_accessor :asset_type # An Identity and Access Management (IAM) policy, which specifies access # controls for Google Cloud resources. A `Policy` is a collection of `bindings`. # A `binding` binds one or more `members` to a single `role`. Members can be # user accounts, service accounts, Google groups, and domains (such as G Suite). # A `role` is a named list of permissions; each `role` can be an IAM predefined # role or a user-created custom role. For some types of Google Cloud resources, # a `binding` can also specify a `condition`, which is a logical expression that # allows access to a resource only if the expression evaluates to `true`. A # condition can add constraints based on attributes of the request, the resource, # or both. To learn which resources support conditions in their IAM policies, # see the [IAM documentation](https://cloud.google.com/iam/help/conditions/ # resource-policies). **JSON example:** ` "bindings": [ ` "role": "roles/ # resourcemanager.organizationAdmin", "members": [ "user:mike@example.com", " # group:admins@example.com", "domain:google.com", "serviceAccount:my-project-id@ # appspot.gserviceaccount.com" ] `, ` "role": "roles/resourcemanager. # organizationViewer", "members": [ "user:eve@example.com" ], "condition": ` " # title": "expirable access", "description": "Does not grant access after Sep # 2020", "expression": "request.time < timestamp('2020-10-01T00:00:00.000Z')", ` # ` ], "etag": "BwWWja0YfJA=", "version": 3 ` **YAML example:** bindings: - # members: - user:mike@example.com - group:admins@example.com - domain:google. # com - serviceAccount:my-project-id@appspot.gserviceaccount.com role: roles/ # resourcemanager.organizationAdmin - members: - user:eve@example.com role: # roles/resourcemanager.organizationViewer condition: title: expirable access # description: Does not grant access after Sep 2020 expression: request.time < # timestamp('2020-10-01T00:00:00.000Z') - etag: BwWWja0YfJA= - version: 3 For a # description of IAM and its features, see the [IAM documentation](https://cloud. # google.com/iam/docs/). # Corresponds to the JSON property `iamPolicy` # @return [Google::Apis::CloudassetV1::Policy] attr_accessor :iam_policy # The full name of the asset. Example: `//compute.googleapis.com/projects/ # my_project_123/zones/zone1/instances/instance1` See [Resource names](https:// # cloud.google.com/apis/design/resource_names#full_resource_name) for more # information. # Corresponds to the JSON property `name` # @return [String] attr_accessor :name # A representation of an [organization policy](https://cloud.google.com/resource- # manager/docs/organization-policy/overview#organization_policy). There can be # more than one organization policy with different constraints set on a given # resource. # Corresponds to the JSON property `orgPolicy` # @return [Array] attr_accessor :org_policy # The inventory details of a VM. # Corresponds to the JSON property `osInventory` # @return [Google::Apis::CloudassetV1::Inventory] attr_accessor :os_inventory # A representation of a Google Cloud resource. # Corresponds to the JSON property `resource` # @return [Google::Apis::CloudassetV1::Resource] attr_accessor :resource # `ServicePerimeter` describes a set of Google Cloud resources which can freely # import and export data amongst themselves, but not export outside of the ` # ServicePerimeter`. If a request with a source within this `ServicePerimeter` # has a target outside of the `ServicePerimeter`, the request will be blocked. # Otherwise the request is allowed. There are two types of Service Perimeter - # Regular and Bridge. Regular Service Perimeters cannot overlap, a single Google # Cloud project can only belong to a single regular Service Perimeter. Service # Perimeter Bridges can contain only Google Cloud projects as members, a single # Google Cloud project may belong to multiple Service Perimeter Bridges. # Corresponds to the JSON property `servicePerimeter` # @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1ServicePerimeter] attr_accessor :service_perimeter # The last update timestamp of an asset. update_time is updated when create/ # update/delete operation is performed. # Corresponds to the JSON property `updateTime` # @return [String] attr_accessor :update_time def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @access_level = args[:access_level] if args.key?(:access_level) @access_policy = args[:access_policy] if args.key?(:access_policy) @ancestors = args[:ancestors] if args.key?(:ancestors) @asset_type = args[:asset_type] if args.key?(:asset_type) @iam_policy = args[:iam_policy] if args.key?(:iam_policy) @name = args[:name] if args.key?(:name) @org_policy = args[:org_policy] if args.key?(:org_policy) @os_inventory = args[:os_inventory] if args.key?(:os_inventory) @resource = args[:resource] if args.key?(:resource) @service_perimeter = args[:service_perimeter] if args.key?(:service_perimeter) @update_time = args[:update_time] if args.key?(:update_time) end end # Specifies the audit configuration for a service. The configuration determines # which permission types are logged, and what identities, if any, are exempted # from logging. An AuditConfig must have one or more AuditLogConfigs. If there # are AuditConfigs for both `allServices` and a specific service, the union of # the two AuditConfigs is used for that service: the log_types specified in each # AuditConfig are enabled, and the exempted_members in each AuditLogConfig are # exempted. Example Policy with multiple AuditConfigs: ` "audit_configs": [ ` " # service": "allServices", "audit_log_configs": [ ` "log_type": "DATA_READ", " # exempted_members": [ "user:jose@example.com" ] `, ` "log_type": "DATA_WRITE" `, # ` "log_type": "ADMIN_READ" ` ] `, ` "service": "sampleservice.googleapis.com", # "audit_log_configs": [ ` "log_type": "DATA_READ" `, ` "log_type": "DATA_WRITE" # , "exempted_members": [ "user:aliya@example.com" ] ` ] ` ] ` For sampleservice, # this policy enables DATA_READ, DATA_WRITE and ADMIN_READ logging. It also # exempts jose@example.com from DATA_READ logging, and aliya@example.com from # DATA_WRITE logging. class AuditConfig include Google::Apis::Core::Hashable # The configuration for logging of each type of permission. # Corresponds to the JSON property `auditLogConfigs` # @return [Array] attr_accessor :audit_log_configs # Specifies a service that will be enabled for audit logging. For example, ` # storage.googleapis.com`, `cloudsql.googleapis.com`. `allServices` is a special # value that covers all services. # Corresponds to the JSON property `service` # @return [String] attr_accessor :service def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @audit_log_configs = args[:audit_log_configs] if args.key?(:audit_log_configs) @service = args[:service] if args.key?(:service) end end # Provides the configuration for logging a type of permissions. Example: ` " # audit_log_configs": [ ` "log_type": "DATA_READ", "exempted_members": [ "user: # jose@example.com" ] `, ` "log_type": "DATA_WRITE" ` ] ` This enables ' # DATA_READ' and 'DATA_WRITE' logging, while exempting jose@example.com from # DATA_READ logging. class AuditLogConfig include Google::Apis::Core::Hashable # Specifies the identities that do not cause logging for this type of permission. # Follows the same format of Binding.members. # Corresponds to the JSON property `exemptedMembers` # @return [Array] attr_accessor :exempted_members # The log type that this config enables. # Corresponds to the JSON property `logType` # @return [String] attr_accessor :log_type def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @exempted_members = args[:exempted_members] if args.key?(:exempted_members) @log_type = args[:log_type] if args.key?(:log_type) end end # Batch get assets history response. class BatchGetAssetsHistoryResponse include Google::Apis::Core::Hashable # A list of assets with valid time windows. # Corresponds to the JSON property `assets` # @return [Array] attr_accessor :assets def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @assets = args[:assets] if args.key?(:assets) end end # A BigQuery destination for exporting assets to. class BigQueryDestination include Google::Apis::Core::Hashable # Required. The BigQuery dataset in format "projects/projectId/datasets/ # datasetId", to which the snapshot result should be exported. If this dataset # does not exist, the export call returns an INVALID_ARGUMENT error. # Corresponds to the JSON property `dataset` # @return [String] attr_accessor :dataset # If the destination table already exists and this flag is `TRUE`, the table # will be overwritten by the contents of assets snapshot. If the flag is `FALSE` # or unset and the destination table already exists, the export call returns an # INVALID_ARGUMEMT error. # Corresponds to the JSON property `force` # @return [Boolean] attr_accessor :force alias_method :force?, :force # Specifications of BigQuery partitioned table as export destination. # Corresponds to the JSON property `partitionSpec` # @return [Google::Apis::CloudassetV1::PartitionSpec] attr_accessor :partition_spec # If this flag is `TRUE`, the snapshot results will be written to one or # multiple tables, each of which contains results of one asset type. The [force] # and [partition_spec] fields will apply to each of them. Field [table] will be # concatenated with "_" and the asset type names (see https://cloud.google.com/ # asset-inventory/docs/supported-asset-types for supported asset types) to # construct per-asset-type table names, in which all non-alphanumeric characters # like "." and "/" will be substituted by "_". Example: if field [table] is " # mytable" and snapshot results contain "storage.googleapis.com/Bucket" assets, # the corresponding table name will be "mytable_storage_googleapis_com_Bucket". # If any of these tables does not exist, a new table with the concatenated name # will be created. When [content_type] in the ExportAssetsRequest is `RESOURCE`, # the schema of each table will include RECORD-type columns mapped to the nested # fields in the Asset.resource.data field of that asset type (up to the 15 # nested level BigQuery supports (https://cloud.google.com/bigquery/docs/nested- # repeated#limitations)). The fields in >15 nested levels will be stored in JSON # format string as a child column of its parent RECORD column. If error occurs # when exporting to any table, the whole export call will return an error but # the export results that already succeed will persist. Example: if exporting to # table_type_A succeeds when exporting to table_type_B fails during one export # call, the results in table_type_A will persist and there will not be partial # results persisting in a table. # Corresponds to the JSON property `separateTablesPerAssetType` # @return [Boolean] attr_accessor :separate_tables_per_asset_type alias_method :separate_tables_per_asset_type?, :separate_tables_per_asset_type # Required. The BigQuery table to which the snapshot result should be written. # If this table does not exist, a new table with the given name will be created. # Corresponds to the JSON property `table` # @return [String] attr_accessor :table def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @dataset = args[:dataset] if args.key?(:dataset) @force = args[:force] if args.key?(:force) @partition_spec = args[:partition_spec] if args.key?(:partition_spec) @separate_tables_per_asset_type = args[:separate_tables_per_asset_type] if args.key?(:separate_tables_per_asset_type) @table = args[:table] if args.key?(:table) end end # Associates `members` with a `role`. class Binding include Google::Apis::Core::Hashable # Represents a textual expression in the Common Expression Language (CEL) syntax. # CEL is a C-like expression language. The syntax and semantics of CEL are # documented at https://github.com/google/cel-spec. Example (Comparison): title: # "Summary size limit" description: "Determines if a summary is less than 100 # chars" expression: "document.summary.size() < 100" Example (Equality): title: " # Requestor is owner" description: "Determines if requestor is the document # owner" expression: "document.owner == request.auth.claims.email" Example ( # Logic): title: "Public documents" description: "Determine whether the document # should be publicly visible" expression: "document.type != 'private' && # document.type != 'internal'" Example (Data Manipulation): title: "Notification # string" description: "Create a notification string with a timestamp." # expression: "'New message received at ' + string(document.create_time)" The # exact variables and functions that may be referenced within an expression are # determined by the service that evaluates it. See the service documentation for # additional information. # Corresponds to the JSON property `condition` # @return [Google::Apis::CloudassetV1::Expr] attr_accessor :condition # Specifies the identities requesting access for a Cloud Platform resource. ` # members` can have the following values: * `allUsers`: A special identifier # that represents anyone who is on the internet; with or without a Google # account. * `allAuthenticatedUsers`: A special identifier that represents # anyone who is authenticated with a Google account or a service account. * ` # user:`emailid``: An email address that represents a specific Google account. # For example, `alice@example.com` . * `serviceAccount:`emailid``: An email # address that represents a service account. For example, `my-other-app@appspot. # gserviceaccount.com`. * `group:`emailid``: An email address that represents a # Google group. For example, `admins@example.com`. * `deleted:user:`emailid`?uid= # `uniqueid``: An email address (plus unique identifier) representing a user # that has been recently deleted. For example, `alice@example.com?uid= # 123456789012345678901`. If the user is recovered, this value reverts to `user:` # emailid`` and the recovered user retains the role in the binding. * `deleted: # serviceAccount:`emailid`?uid=`uniqueid``: An email address (plus unique # identifier) representing a service account that has been recently deleted. For # example, `my-other-app@appspot.gserviceaccount.com?uid=123456789012345678901`. # If the service account is undeleted, this value reverts to `serviceAccount:` # emailid`` and the undeleted service account retains the role in the binding. * # `deleted:group:`emailid`?uid=`uniqueid``: An email address (plus unique # identifier) representing a Google group that has been recently deleted. For # example, `admins@example.com?uid=123456789012345678901`. If the group is # recovered, this value reverts to `group:`emailid`` and the recovered group # retains the role in the binding. * `domain:`domain``: The G Suite domain ( # primary) that represents all the users of that domain. For example, `google. # com` or `example.com`. # Corresponds to the JSON property `members` # @return [Array] attr_accessor :members # Role that is assigned to `members`. For example, `roles/viewer`, `roles/editor` # , or `roles/owner`. # Corresponds to the JSON property `role` # @return [String] attr_accessor :role def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @condition = args[:condition] if args.key?(:condition) @members = args[:members] if args.key?(:members) @role = args[:role] if args.key?(:role) end end # Create asset feed request. class CreateFeedRequest include Google::Apis::Core::Hashable # An asset feed used to export asset updates to a destinations. An asset feed # filter controls what updates are exported. The asset feed must be created # within a project, organization, or folder. Supported destinations are: Pub/Sub # topics. # Corresponds to the JSON property `feed` # @return [Google::Apis::CloudassetV1::Feed] attr_accessor :feed # Required. This is the client-assigned asset feed identifier and it needs to be # unique under a specific parent project/folder/organization. # Corresponds to the JSON property `feedId` # @return [String] attr_accessor :feed_id def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @feed = args[:feed] if args.key?(:feed) @feed_id = args[:feed_id] if args.key?(:feed_id) end end # A generic empty message that you can re-use to avoid defining duplicated empty # messages in your APIs. A typical example is to use it as the request or the # response type of an API method. For instance: service Foo ` rpc Bar(google. # protobuf.Empty) returns (google.protobuf.Empty); ` The JSON representation for # `Empty` is empty JSON object ````. class Empty include Google::Apis::Core::Hashable def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) end end # Explanation about the IAM policy search result. class Explanation include Google::Apis::Core::Hashable # The map from roles to their included permissions that match the permission # query (i.e., a query containing `policy.role.permissions:`). Example: if query # `policy.role.permissions:compute.disk.get` matches a policy binding that # contains owner role, the matched_permissions will be ``"roles/owner": [" # compute.disk.get"]``. The roles can also be found in the returned `policy` # bindings. Note that the map is populated only for requests with permission # queries. # Corresponds to the JSON property `matchedPermissions` # @return [Hash] attr_accessor :matched_permissions def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @matched_permissions = args[:matched_permissions] if args.key?(:matched_permissions) end end # Export asset request. class ExportAssetsRequest include Google::Apis::Core::Hashable # A list of asset types to take a snapshot for. For example: "compute.googleapis. # com/Disk". Regular expressions are also supported. For example: * "compute. # googleapis.com.*" snapshots resources whose asset type starts with "compute. # googleapis.com". * ".*Instance" snapshots resources whose asset type ends with # "Instance". * ".*Instance.*" snapshots resources whose asset type contains " # Instance". See [RE2](https://github.com/google/re2/wiki/Syntax) for all # supported regular expression syntax. If the regular expression does not match # any supported asset type, an INVALID_ARGUMENT error will be returned. If # specified, only matching assets will be returned, otherwise, it will snapshot # all asset types. See [Introduction to Cloud Asset Inventory](https://cloud. # google.com/asset-inventory/docs/overview) for all supported asset types. # Corresponds to the JSON property `assetTypes` # @return [Array] attr_accessor :asset_types # Asset content type. If not specified, no content but the asset name will be # returned. # Corresponds to the JSON property `contentType` # @return [String] attr_accessor :content_type # Output configuration for export assets destination. # Corresponds to the JSON property `outputConfig` # @return [Google::Apis::CloudassetV1::OutputConfig] attr_accessor :output_config # Timestamp to take an asset snapshot. This can only be set to a timestamp # between the current time and the current time minus 35 days (inclusive). If # not specified, the current time will be used. Due to delays in resource data # collection and indexing, there is a volatile window during which running the # same query may get different results. # Corresponds to the JSON property `readTime` # @return [String] attr_accessor :read_time def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @asset_types = args[:asset_types] if args.key?(:asset_types) @content_type = args[:content_type] if args.key?(:content_type) @output_config = args[:output_config] if args.key?(:output_config) @read_time = args[:read_time] if args.key?(:read_time) end end # Represents a textual expression in the Common Expression Language (CEL) syntax. # CEL is a C-like expression language. The syntax and semantics of CEL are # documented at https://github.com/google/cel-spec. Example (Comparison): title: # "Summary size limit" description: "Determines if a summary is less than 100 # chars" expression: "document.summary.size() < 100" Example (Equality): title: " # Requestor is owner" description: "Determines if requestor is the document # owner" expression: "document.owner == request.auth.claims.email" Example ( # Logic): title: "Public documents" description: "Determine whether the document # should be publicly visible" expression: "document.type != 'private' && # document.type != 'internal'" Example (Data Manipulation): title: "Notification # string" description: "Create a notification string with a timestamp." # expression: "'New message received at ' + string(document.create_time)" The # exact variables and functions that may be referenced within an expression are # determined by the service that evaluates it. See the service documentation for # additional information. class Expr include Google::Apis::Core::Hashable # Optional. Description of the expression. This is a longer text which describes # the expression, e.g. when hovered over it in a UI. # Corresponds to the JSON property `description` # @return [String] attr_accessor :description # Textual representation of an expression in Common Expression Language syntax. # Corresponds to the JSON property `expression` # @return [String] attr_accessor :expression # Optional. String indicating the location of the expression for error reporting, # e.g. a file name and a position in the file. # Corresponds to the JSON property `location` # @return [String] attr_accessor :location # Optional. Title for the expression, i.e. a short string describing its purpose. # This can be used e.g. in UIs which allow to enter the expression. # Corresponds to the JSON property `title` # @return [String] attr_accessor :title def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @description = args[:description] if args.key?(:description) @expression = args[:expression] if args.key?(:expression) @location = args[:location] if args.key?(:location) @title = args[:title] if args.key?(:title) end end # An asset feed used to export asset updates to a destinations. An asset feed # filter controls what updates are exported. The asset feed must be created # within a project, organization, or folder. Supported destinations are: Pub/Sub # topics. class Feed include Google::Apis::Core::Hashable # A list of the full names of the assets to receive updates. You must specify # either or both of asset_names and asset_types. Only asset updates matching # specified asset_names or asset_types are exported to the feed. Example: `// # compute.googleapis.com/projects/my_project_123/zones/zone1/instances/instance1` # . See [Resource Names](https://cloud.google.com/apis/design/resource_names# # full_resource_name) for more info. # Corresponds to the JSON property `assetNames` # @return [Array] attr_accessor :asset_names # A list of types of the assets to receive updates. You must specify either or # both of asset_names and asset_types. Only asset updates matching specified # asset_names or asset_types are exported to the feed. Example: `"compute. # googleapis.com/Disk"` See [this topic](https://cloud.google.com/asset- # inventory/docs/supported-asset-types) for a list of all supported asset types. # Corresponds to the JSON property `assetTypes` # @return [Array] attr_accessor :asset_types # Represents a textual expression in the Common Expression Language (CEL) syntax. # CEL is a C-like expression language. The syntax and semantics of CEL are # documented at https://github.com/google/cel-spec. Example (Comparison): title: # "Summary size limit" description: "Determines if a summary is less than 100 # chars" expression: "document.summary.size() < 100" Example (Equality): title: " # Requestor is owner" description: "Determines if requestor is the document # owner" expression: "document.owner == request.auth.claims.email" Example ( # Logic): title: "Public documents" description: "Determine whether the document # should be publicly visible" expression: "document.type != 'private' && # document.type != 'internal'" Example (Data Manipulation): title: "Notification # string" description: "Create a notification string with a timestamp." # expression: "'New message received at ' + string(document.create_time)" The # exact variables and functions that may be referenced within an expression are # determined by the service that evaluates it. See the service documentation for # additional information. # Corresponds to the JSON property `condition` # @return [Google::Apis::CloudassetV1::Expr] attr_accessor :condition # Asset content type. If not specified, no content but the asset name and type # will be returned. # Corresponds to the JSON property `contentType` # @return [String] attr_accessor :content_type # Output configuration for asset feed destination. # Corresponds to the JSON property `feedOutputConfig` # @return [Google::Apis::CloudassetV1::FeedOutputConfig] attr_accessor :feed_output_config # Required. The format will be projects/`project_number`/feeds/`client- # assigned_feed_identifier` or folders/`folder_number`/feeds/`client- # assigned_feed_identifier` or organizations/`organization_number`/feeds/`client- # assigned_feed_identifier` The client-assigned feed identifier must be unique # within the parent project/folder/organization. # Corresponds to the JSON property `name` # @return [String] attr_accessor :name def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @asset_names = args[:asset_names] if args.key?(:asset_names) @asset_types = args[:asset_types] if args.key?(:asset_types) @condition = args[:condition] if args.key?(:condition) @content_type = args[:content_type] if args.key?(:content_type) @feed_output_config = args[:feed_output_config] if args.key?(:feed_output_config) @name = args[:name] if args.key?(:name) end end # Output configuration for asset feed destination. class FeedOutputConfig include Google::Apis::Core::Hashable # A Pub/Sub destination. # Corresponds to the JSON property `pubsubDestination` # @return [Google::Apis::CloudassetV1::PubsubDestination] attr_accessor :pubsub_destination def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @pubsub_destination = args[:pubsub_destination] if args.key?(:pubsub_destination) end end # A Cloud Storage location. class GcsDestination include Google::Apis::Core::Hashable # The uri of the Cloud Storage object. It's the same uri that is used by gsutil. # Example: "gs://bucket_name/object_name". See [Viewing and Editing Object # Metadata](https://cloud.google.com/storage/docs/viewing-editing-metadata) for # more information. # Corresponds to the JSON property `uri` # @return [String] attr_accessor :uri # The uri prefix of all generated Cloud Storage objects. Example: "gs:// # bucket_name/object_name_prefix". Each object uri is in format: "gs:// # bucket_name/object_name_prefix// and only contains assets for that type. # starts from 0. Example: "gs://bucket_name/object_name_prefix/compute. # googleapis.com/Disk/0" is the first shard of output objects containing all # compute.googleapis.com/Disk assets. An INVALID_ARGUMENT error will be returned # if file with the same name "gs://bucket_name/object_name_prefix" already # exists. # Corresponds to the JSON property `uriPrefix` # @return [String] attr_accessor :uri_prefix def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @uri = args[:uri] if args.key?(:uri) @uri_prefix = args[:uri_prefix] if args.key?(:uri_prefix) end end # An IAM role or permission under analysis. class GoogleCloudAssetV1Access include Google::Apis::Core::Hashable # Represents the detailed state of an entity under analysis, such as a resource, # an identity or an access. # Corresponds to the JSON property `analysisState` # @return [Google::Apis::CloudassetV1::IamPolicyAnalysisState] attr_accessor :analysis_state # The permission. # Corresponds to the JSON property `permission` # @return [String] attr_accessor :permission # The role. # Corresponds to the JSON property `role` # @return [String] attr_accessor :role def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @analysis_state = args[:analysis_state] if args.key?(:analysis_state) @permission = args[:permission] if args.key?(:permission) @role = args[:role] if args.key?(:role) end end # An access control list, derived from the above IAM policy binding, which # contains a set of resources and accesses. May include one item from each set # to compose an access control entry. NOTICE that there could be multiple access # control lists for one IAM policy binding. The access control lists are created # based on resource and access combinations. For example, assume we have the # following cases in one IAM policy binding: - Permission P1 and P2 apply to # resource R1 and R2; - Permission P3 applies to resource R2 and R3; This will # result in the following access control lists: - AccessControlList 1: [R1, R2], # [P1, P2] - AccessControlList 2: [R2, R3], [P3] class GoogleCloudAssetV1AccessControlList include Google::Apis::Core::Hashable # The accesses that match one of the following conditions: - The access_selector, # if it is specified in request; - Otherwise, access specifiers reachable from # the policy binding's role. # Corresponds to the JSON property `accesses` # @return [Array] attr_accessor :accesses # Resource edges of the graph starting from the policy attached resource to any # descendant resources. The Edge.source_node contains the full resource name of # a parent resource and Edge.target_node contains the full resource name of a # child resource. This field is present only if the output_resource_edges option # is enabled in request. # Corresponds to the JSON property `resourceEdges` # @return [Array] attr_accessor :resource_edges # The resources that match one of the following conditions: - The # resource_selector, if it is specified in request; - Otherwise, resources # reachable from the policy attached resource. # Corresponds to the JSON property `resources` # @return [Array] attr_accessor :resources def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @accesses = args[:accesses] if args.key?(:accesses) @resource_edges = args[:resource_edges] if args.key?(:resource_edges) @resources = args[:resources] if args.key?(:resources) end end # A BigQuery destination. class GoogleCloudAssetV1BigQueryDestination include Google::Apis::Core::Hashable # Required. The BigQuery dataset in format "projects/projectId/datasets/ # datasetId", to which the analysis results should be exported. If this dataset # does not exist, the export call will return an INVALID_ARGUMENT error. # Corresponds to the JSON property `dataset` # @return [String] attr_accessor :dataset # The partition key for BigQuery partitioned table. # Corresponds to the JSON property `partitionKey` # @return [String] attr_accessor :partition_key # Required. The prefix of the BigQuery tables to which the analysis results will # be written. Tables will be created based on this table_prefix if not exist: * # _analysis table will contain export operation's metadata. * _analysis_result # will contain all the IamPolicyAnalysisResult. When [partition_key] is # specified, both tables will be partitioned based on the [partition_key]. # Corresponds to the JSON property `tablePrefix` # @return [String] attr_accessor :table_prefix # Optional. Specifies the action that occurs if the destination table or # partition already exists. The following values are supported: * WRITE_TRUNCATE: # If the table or partition already exists, BigQuery overwrites the entire # table or all the partitions data. * WRITE_APPEND: If the table or partition # already exists, BigQuery appends the data to the table or the latest partition. # * WRITE_EMPTY: If the table already exists and contains data, an error is # returned. The default value is WRITE_APPEND. Each action is atomic and only # occurs if BigQuery is able to complete the job successfully. Details are at # https://cloud.google.com/bigquery/docs/loading-data-local# # appending_to_or_overwriting_a_table_using_a_local_file. # Corresponds to the JSON property `writeDisposition` # @return [String] attr_accessor :write_disposition def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @dataset = args[:dataset] if args.key?(:dataset) @partition_key = args[:partition_key] if args.key?(:partition_key) @table_prefix = args[:table_prefix] if args.key?(:table_prefix) @write_disposition = args[:write_disposition] if args.key?(:write_disposition) end end # A directional edge. class GoogleCloudAssetV1Edge include Google::Apis::Core::Hashable # The source node of the edge. For example, it could be a full resource name for # a resource node or an email of an identity. # Corresponds to the JSON property `sourceNode` # @return [String] attr_accessor :source_node # The target node of the edge. For example, it could be a full resource name for # a resource node or an email of an identity. # Corresponds to the JSON property `targetNode` # @return [String] attr_accessor :target_node def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @source_node = args[:source_node] if args.key?(:source_node) @target_node = args[:target_node] if args.key?(:target_node) end end # A Cloud Storage location. class GoogleCloudAssetV1GcsDestination include Google::Apis::Core::Hashable # Required. The uri of the Cloud Storage object. It's the same uri that is used # by gsutil. For example: "gs://bucket_name/object_name". See [Quickstart: Using # the gsutil tool] (https://cloud.google.com/storage/docs/quickstart-gsutil) for # examples. # Corresponds to the JSON property `uri` # @return [String] attr_accessor :uri def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @uri = args[:uri] if args.key?(:uri) end end # An identity under analysis. class GoogleCloudAssetV1Identity include Google::Apis::Core::Hashable # Represents the detailed state of an entity under analysis, such as a resource, # an identity or an access. # Corresponds to the JSON property `analysisState` # @return [Google::Apis::CloudassetV1::IamPolicyAnalysisState] attr_accessor :analysis_state # The identity name in any form of members appear in [IAM policy binding](https:/ # /cloud.google.com/iam/reference/rest/v1/Binding), such as: - user:foo@google. # com - group:group1@google.com - serviceAccount:s1@prj1.iam.gserviceaccount.com # - projectOwner:some_project_id - domain:google.com - allUsers - etc. # Corresponds to the JSON property `name` # @return [String] attr_accessor :name def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @analysis_state = args[:analysis_state] if args.key?(:analysis_state) @name = args[:name] if args.key?(:name) end end # The identities and group edges. class GoogleCloudAssetV1IdentityList include Google::Apis::Core::Hashable # Group identity edges of the graph starting from the binding's group members to # any node of the identities. The Edge.source_node contains a group, such as ` # group:parent@google.com`. The Edge.target_node contains a member of the group, # such as `group:child@google.com` or `user:foo@google.com`. This field is # present only if the output_group_edges option is enabled in request. # Corresponds to the JSON property `groupEdges` # @return [Array] attr_accessor :group_edges # Only the identities that match one of the following conditions will be # presented: - The identity_selector, if it is specified in request; - Otherwise, # identities reachable from the policy binding's members. # Corresponds to the JSON property `identities` # @return [Array] attr_accessor :identities def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @group_edges = args[:group_edges] if args.key?(:group_edges) @identities = args[:identities] if args.key?(:identities) end end # A Google Cloud resource under analysis. class GoogleCloudAssetV1Resource include Google::Apis::Core::Hashable # Represents the detailed state of an entity under analysis, such as a resource, # an identity or an access. # Corresponds to the JSON property `analysisState` # @return [Google::Apis::CloudassetV1::IamPolicyAnalysisState] attr_accessor :analysis_state # The [full resource name](https://cloud.google.com/asset-inventory/docs/ # resource-name-format) # Corresponds to the JSON property `fullResourceName` # @return [String] attr_accessor :full_resource_name def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @analysis_state = args[:analysis_state] if args.key?(:analysis_state) @full_resource_name = args[:full_resource_name] if args.key?(:full_resource_name) end end # Used in `policy_type` to specify how `boolean_policy` will behave at this # resource. class GoogleCloudOrgpolicyV1BooleanPolicy include Google::Apis::Core::Hashable # If `true`, then the `Policy` is enforced. If `false`, then any configuration # is acceptable. Suppose you have a `Constraint` `constraints/compute. # disableSerialPortAccess` with `constraint_default` set to `ALLOW`. A `Policy` # for that `Constraint` exhibits the following behavior: - If the `Policy` at # this resource has enforced set to `false`, serial port connection attempts # will be allowed. - If the `Policy` at this resource has enforced set to `true`, # serial port connection attempts will be refused. - If the `Policy` at this # resource is `RestoreDefault`, serial port connection attempts will be allowed. # - If no `Policy` is set at this resource or anywhere higher in the resource # hierarchy, serial port connection attempts will be allowed. - If no `Policy` # is set at this resource, but one exists higher in the resource hierarchy, the # behavior is as if the`Policy` were set at this resource. The following # examples demonstrate the different possible layerings: Example 1 (nearest ` # Constraint` wins): `organizations/foo` has a `Policy` with: `enforced: false` ` # projects/bar` has no `Policy` set. The constraint at `projects/bar` and ` # organizations/foo` will not be enforced. Example 2 (enforcement gets replaced): # `organizations/foo` has a `Policy` with: `enforced: false` `projects/bar` has # a `Policy` with: `enforced: true` The constraint at `organizations/foo` is not # enforced. The constraint at `projects/bar` is enforced. Example 3 ( # RestoreDefault): `organizations/foo` has a `Policy` with: `enforced: true` ` # projects/bar` has a `Policy` with: `RestoreDefault: ``` The constraint at ` # organizations/foo` is enforced. The constraint at `projects/bar` is not # enforced, because `constraint_default` for the `Constraint` is `ALLOW`. # Corresponds to the JSON property `enforced` # @return [Boolean] attr_accessor :enforced alias_method :enforced?, :enforced def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @enforced = args[:enforced] if args.key?(:enforced) end end # Used in `policy_type` to specify how `list_policy` behaves at this resource. ` # ListPolicy` can define specific values and subtrees of Cloud Resource Manager # resource hierarchy (`Organizations`, `Folders`, `Projects`) that are allowed # or denied by setting the `allowed_values` and `denied_values` fields. This is # achieved by using the `under:` and optional `is:` prefixes. The `under:` # prefix is used to denote resource subtree values. The `is:` prefix is used to # denote specific values, and is required only if the value contains a ":". # Values prefixed with "is:" are treated the same as values with no prefix. # Ancestry subtrees must be in one of the following formats: - "projects/", e.g. # "projects/tokyo-rain-123" - "folders/", e.g. "folders/1234" - "organizations/", # e.g. "organizations/1234" The `supports_under` field of the associated ` # Constraint` defines whether ancestry prefixes can be used. You can set ` # allowed_values` and `denied_values` in the same `Policy` if `all_values` is ` # ALL_VALUES_UNSPECIFIED`. `ALLOW` or `DENY` are used to allow or deny all # values. If `all_values` is set to either `ALLOW` or `DENY`, `allowed_values` # and `denied_values` must be unset. class GoogleCloudOrgpolicyV1ListPolicy include Google::Apis::Core::Hashable # The policy all_values state. # Corresponds to the JSON property `allValues` # @return [String] attr_accessor :all_values # List of values allowed at this resource. Can only be set if `all_values` is # set to `ALL_VALUES_UNSPECIFIED`. # Corresponds to the JSON property `allowedValues` # @return [Array] attr_accessor :allowed_values # List of values denied at this resource. Can only be set if `all_values` is set # to `ALL_VALUES_UNSPECIFIED`. # Corresponds to the JSON property `deniedValues` # @return [Array] attr_accessor :denied_values # Determines the inheritance behavior for this `Policy`. By default, a ` # ListPolicy` set at a resource supersedes any `Policy` set anywhere up the # resource hierarchy. However, if `inherit_from_parent` is set to `true`, then # the values from the effective `Policy` of the parent resource are inherited, # meaning the values set in this `Policy` are added to the values inherited up # the hierarchy. Setting `Policy` hierarchies that inherit both allowed values # and denied values isn't recommended in most circumstances to keep the # configuration simple and understandable. However, it is possible to set a ` # Policy` with `allowed_values` set that inherits a `Policy` with `denied_values` # set. In this case, the values that are allowed must be in `allowed_values` # and not present in `denied_values`. For example, suppose you have a ` # Constraint` `constraints/serviceuser.services`, which has a `constraint_type` # of `list_constraint`, and with `constraint_default` set to `ALLOW`. Suppose # that at the Organization level, a `Policy` is applied that restricts the # allowed API activations to ``E1`, `E2``. Then, if a `Policy` is applied to a # project below the Organization that has `inherit_from_parent` set to `false` # and field all_values set to DENY, then an attempt to activate any API will be # denied. The following examples demonstrate different possible layerings for ` # projects/bar` parented by `organizations/foo`: Example 1 (no inherited values): # `organizations/foo` has a `Policy` with values: `allowed_values: "E1" # allowed_values:"E2"` `projects/bar` has `inherit_from_parent` `false` and # values: `allowed_values: "E3" allowed_values: "E4"` The accepted values at ` # organizations/foo` are `E1`, `E2`. The accepted values at `projects/bar` are ` # E3`, and `E4`. Example 2 (inherited values): `organizations/foo` has a `Policy` # with values: `allowed_values: "E1" allowed_values:"E2"` `projects/bar` has a ` # Policy` with values: `value: "E3" value: "E4" inherit_from_parent: true` The # accepted values at `organizations/foo` are `E1`, `E2`. The accepted values at ` # projects/bar` are `E1`, `E2`, `E3`, and `E4`. Example 3 (inheriting both # allowed and denied values): `organizations/foo` has a `Policy` with values: ` # allowed_values: "E1" allowed_values: "E2"` `projects/bar` has a `Policy` with: # `denied_values: "E1"` The accepted values at `organizations/foo` are `E1`, `E2` # . The value accepted at `projects/bar` is `E2`. Example 4 (RestoreDefault): ` # organizations/foo` has a `Policy` with values: `allowed_values: "E1" # allowed_values:"E2"` `projects/bar` has a `Policy` with values: ` # RestoreDefault: ``` The accepted values at `organizations/foo` are `E1`, `E2`. # The accepted values at `projects/bar` are either all or none depending on the # value of `constraint_default` (if `ALLOW`, all; if `DENY`, none). Example 5 ( # no policy inherits parent policy): `organizations/foo` has no `Policy` set. ` # projects/bar` has no `Policy` set. The accepted values at both levels are # either all or none depending on the value of `constraint_default` (if `ALLOW`, # all; if `DENY`, none). Example 6 (ListConstraint allowing all): `organizations/ # foo` has a `Policy` with values: `allowed_values: "E1" allowed_values: "E2"` ` # projects/bar` has a `Policy` with: `all: ALLOW` The accepted values at ` # organizations/foo` are `E1`, E2`. Any value is accepted at `projects/bar`. # Example 7 (ListConstraint allowing none): `organizations/foo` has a `Policy` # with values: `allowed_values: "E1" allowed_values: "E2"` `projects/bar` has a ` # Policy` with: `all: DENY` The accepted values at `organizations/foo` are `E1`, # E2`. No value is accepted at `projects/bar`. Example 10 (allowed and denied # subtrees of Resource Manager hierarchy): Given the following resource # hierarchy O1->`F1, F2`; F1->`P1`; F2->`P2, P3`, `organizations/foo` has a ` # Policy` with values: `allowed_values: "under:organizations/O1"` `projects/bar` # has a `Policy` with: `allowed_values: "under:projects/P3"` `denied_values: " # under:folders/F2"` The accepted values at `organizations/foo` are ` # organizations/O1`, `folders/F1`, `folders/F2`, `projects/P1`, `projects/P2`, ` # projects/P3`. The accepted values at `projects/bar` are `organizations/O1`, ` # folders/F1`, `projects/P1`. # Corresponds to the JSON property `inheritFromParent` # @return [Boolean] attr_accessor :inherit_from_parent alias_method :inherit_from_parent?, :inherit_from_parent # Optional. The Google Cloud Console will try to default to a configuration that # matches the value specified in this `Policy`. If `suggested_value` is not set, # it will inherit the value specified higher in the hierarchy, unless ` # inherit_from_parent` is `false`. # Corresponds to the JSON property `suggestedValue` # @return [String] attr_accessor :suggested_value def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @all_values = args[:all_values] if args.key?(:all_values) @allowed_values = args[:allowed_values] if args.key?(:allowed_values) @denied_values = args[:denied_values] if args.key?(:denied_values) @inherit_from_parent = args[:inherit_from_parent] if args.key?(:inherit_from_parent) @suggested_value = args[:suggested_value] if args.key?(:suggested_value) end end # Defines a Cloud Organization `Policy` which is used to specify `Constraints` # for configurations of Cloud Platform resources. class GoogleCloudOrgpolicyV1Policy include Google::Apis::Core::Hashable # Used in `policy_type` to specify how `boolean_policy` will behave at this # resource. # Corresponds to the JSON property `booleanPolicy` # @return [Google::Apis::CloudassetV1::GoogleCloudOrgpolicyV1BooleanPolicy] attr_accessor :boolean_policy # The name of the `Constraint` the `Policy` is configuring, for example, ` # constraints/serviceuser.services`. A [list of available constraints](/resource- # manager/docs/organization-policy/org-policy-constraints) is available. # Immutable after creation. # Corresponds to the JSON property `constraint` # @return [String] attr_accessor :constraint # An opaque tag indicating the current version of the `Policy`, used for # concurrency control. When the `Policy` is returned from either a `GetPolicy` # or a `ListOrgPolicy` request, this `etag` indicates the version of the current # `Policy` to use when executing a read-modify-write loop. When the `Policy` is # returned from a `GetEffectivePolicy` request, the `etag` will be unset. When # the `Policy` is used in a `SetOrgPolicy` method, use the `etag` value that was # returned from a `GetOrgPolicy` request as part of a read-modify-write loop for # concurrency control. Not setting the `etag`in a `SetOrgPolicy` request will # result in an unconditional write of the `Policy`. # Corresponds to the JSON property `etag` # NOTE: Values are automatically base64 encoded/decoded in the client library. # @return [String] attr_accessor :etag # Used in `policy_type` to specify how `list_policy` behaves at this resource. ` # ListPolicy` can define specific values and subtrees of Cloud Resource Manager # resource hierarchy (`Organizations`, `Folders`, `Projects`) that are allowed # or denied by setting the `allowed_values` and `denied_values` fields. This is # achieved by using the `under:` and optional `is:` prefixes. The `under:` # prefix is used to denote resource subtree values. The `is:` prefix is used to # denote specific values, and is required only if the value contains a ":". # Values prefixed with "is:" are treated the same as values with no prefix. # Ancestry subtrees must be in one of the following formats: - "projects/", e.g. # "projects/tokyo-rain-123" - "folders/", e.g. "folders/1234" - "organizations/", # e.g. "organizations/1234" The `supports_under` field of the associated ` # Constraint` defines whether ancestry prefixes can be used. You can set ` # allowed_values` and `denied_values` in the same `Policy` if `all_values` is ` # ALL_VALUES_UNSPECIFIED`. `ALLOW` or `DENY` are used to allow or deny all # values. If `all_values` is set to either `ALLOW` or `DENY`, `allowed_values` # and `denied_values` must be unset. # Corresponds to the JSON property `listPolicy` # @return [Google::Apis::CloudassetV1::GoogleCloudOrgpolicyV1ListPolicy] attr_accessor :list_policy # Ignores policies set above this resource and restores the `constraint_default` # enforcement behavior of the specific `Constraint` at this resource. Suppose # that `constraint_default` is set to `ALLOW` for the `Constraint` `constraints/ # serviceuser.services`. Suppose that organization foo.com sets a `Policy` at # their Organization resource node that restricts the allowed service # activations to deny all service activations. They could then set a `Policy` # with the `policy_type` `restore_default` on several experimental projects, # restoring the `constraint_default` enforcement of the `Constraint` for only # those projects, allowing those projects to have all services activated. # Corresponds to the JSON property `restoreDefault` # @return [Google::Apis::CloudassetV1::GoogleCloudOrgpolicyV1RestoreDefault] attr_accessor :restore_default # The time stamp the `Policy` was previously updated. This is set by the server, # not specified by the caller, and represents the last time a call to ` # SetOrgPolicy` was made for that `Policy`. Any value set by the client will be # ignored. # Corresponds to the JSON property `updateTime` # @return [String] attr_accessor :update_time # Version of the `Policy`. Default version is 0; # Corresponds to the JSON property `version` # @return [Fixnum] attr_accessor :version def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @boolean_policy = args[:boolean_policy] if args.key?(:boolean_policy) @constraint = args[:constraint] if args.key?(:constraint) @etag = args[:etag] if args.key?(:etag) @list_policy = args[:list_policy] if args.key?(:list_policy) @restore_default = args[:restore_default] if args.key?(:restore_default) @update_time = args[:update_time] if args.key?(:update_time) @version = args[:version] if args.key?(:version) end end # Ignores policies set above this resource and restores the `constraint_default` # enforcement behavior of the specific `Constraint` at this resource. Suppose # that `constraint_default` is set to `ALLOW` for the `Constraint` `constraints/ # serviceuser.services`. Suppose that organization foo.com sets a `Policy` at # their Organization resource node that restricts the allowed service # activations to deny all service activations. They could then set a `Policy` # with the `policy_type` `restore_default` on several experimental projects, # restoring the `constraint_default` enforcement of the `Constraint` for only # those projects, allowing those projects to have all services activated. class GoogleCloudOrgpolicyV1RestoreDefault include Google::Apis::Core::Hashable def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) end end # An `AccessLevel` is a label that can be applied to requests to Google Cloud # services, along with a list of requirements necessary for the label to be # applied. class GoogleIdentityAccesscontextmanagerV1AccessLevel include Google::Apis::Core::Hashable # `BasicLevel` is an `AccessLevel` using a set of recommended features. # Corresponds to the JSON property `basic` # @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1BasicLevel] attr_accessor :basic # `CustomLevel` is an `AccessLevel` using the Cloud Common Expression Language # to represent the necessary conditions for the level to apply to a request. See # CEL spec at: https://github.com/google/cel-spec # Corresponds to the JSON property `custom` # @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1CustomLevel] attr_accessor :custom # Description of the `AccessLevel` and its use. Does not affect behavior. # Corresponds to the JSON property `description` # @return [String] attr_accessor :description # Required. Resource name for the Access Level. The `short_name` component must # begin with a letter and only include alphanumeric and '_'. Format: ` # accessPolicies/`policy_id`/accessLevels/`short_name``. The maximum length of # the `short_name` component is 50 characters. # Corresponds to the JSON property `name` # @return [String] attr_accessor :name # Human readable title. Must be unique within the Policy. # Corresponds to the JSON property `title` # @return [String] attr_accessor :title def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @basic = args[:basic] if args.key?(:basic) @custom = args[:custom] if args.key?(:custom) @description = args[:description] if args.key?(:description) @name = args[:name] if args.key?(:name) @title = args[:title] if args.key?(:title) end end # `AccessPolicy` is a container for `AccessLevels` (which define the necessary # attributes to use Google Cloud services) and `ServicePerimeters` (which define # regions of services able to freely pass data within a perimeter). An access # policy is globally visible within an organization, and the restrictions it # specifies apply to all projects within an organization. class GoogleIdentityAccesscontextmanagerV1AccessPolicy include Google::Apis::Core::Hashable # Output only. An opaque identifier for the current version of the `AccessPolicy` # . This will always be a strongly validated etag, meaning that two Access # Polices will be identical if and only if their etags are identical. Clients # should not expect this to be in any specific format. # Corresponds to the JSON property `etag` # @return [String] attr_accessor :etag # Output only. Resource name of the `AccessPolicy`. Format: `accessPolicies/` # policy_id`` # Corresponds to the JSON property `name` # @return [String] attr_accessor :name # Required. The parent of this `AccessPolicy` in the Cloud Resource Hierarchy. # Currently immutable once created. Format: `organizations/`organization_id`` # Corresponds to the JSON property `parent` # @return [String] attr_accessor :parent # Required. Human readable title. Does not affect behavior. # Corresponds to the JSON property `title` # @return [String] attr_accessor :title def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @etag = args[:etag] if args.key?(:etag) @name = args[:name] if args.key?(:name) @parent = args[:parent] if args.key?(:parent) @title = args[:title] if args.key?(:title) end end # Identification for an API Operation. class GoogleIdentityAccesscontextmanagerV1ApiOperation include Google::Apis::Core::Hashable # API methods or permissions to allow. Method or permission must belong to the # service specified by `service_name` field. A single MethodSelector entry with ` # *` specified for the `method` field will allow all methods AND permissions for # the service specified in `service_name`. # Corresponds to the JSON property `methodSelectors` # @return [Array] attr_accessor :method_selectors # The name of the API whose methods or permissions the IngressPolicy or # EgressPolicy want to allow. A single ApiOperation with `service_name` field # set to `*` will allow all methods AND permissions for all services. # Corresponds to the JSON property `serviceName` # @return [String] attr_accessor :service_name def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @method_selectors = args[:method_selectors] if args.key?(:method_selectors) @service_name = args[:service_name] if args.key?(:service_name) end end # `BasicLevel` is an `AccessLevel` using a set of recommended features. class GoogleIdentityAccesscontextmanagerV1BasicLevel include Google::Apis::Core::Hashable # How the `conditions` list should be combined to determine if a request is # granted this `AccessLevel`. If AND is used, each `Condition` in `conditions` # must be satisfied for the `AccessLevel` to be applied. If OR is used, at least # one `Condition` in `conditions` must be satisfied for the `AccessLevel` to be # applied. Default behavior is AND. # Corresponds to the JSON property `combiningFunction` # @return [String] attr_accessor :combining_function # Required. A list of requirements for the `AccessLevel` to be granted. # Corresponds to the JSON property `conditions` # @return [Array] attr_accessor :conditions def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @combining_function = args[:combining_function] if args.key?(:combining_function) @conditions = args[:conditions] if args.key?(:conditions) end end # A condition necessary for an `AccessLevel` to be granted. The Condition is an # AND over its fields. So a Condition is true if: 1) the request IP is from one # of the listed subnetworks AND 2) the originating device complies with the # listed device policy AND 3) all listed access levels are granted AND 4) the # request was sent at a time allowed by the DateTimeRestriction. class GoogleIdentityAccesscontextmanagerV1Condition include Google::Apis::Core::Hashable # `DevicePolicy` specifies device specific restrictions necessary to acquire a # given access level. A `DevicePolicy` specifies requirements for requests from # devices to be granted access levels, it does not do any enforcement on the # device. `DevicePolicy` acts as an AND over all specified fields, and each # repeated field is an OR over its elements. Any unset fields are ignored. For # example, if the proto is ` os_type : DESKTOP_WINDOWS, os_type : DESKTOP_LINUX, # encryption_status: ENCRYPTED`, then the DevicePolicy will be true for requests # originating from encrypted Linux desktops and encrypted Windows desktops. # Corresponds to the JSON property `devicePolicy` # @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1DevicePolicy] attr_accessor :device_policy # CIDR block IP subnetwork specification. May be IPv4 or IPv6. Note that for a # CIDR IP address block, the specified IP address portion must be properly # truncated (i.e. all the host bits must be zero) or the input is considered # malformed. For example, "192.0.2.0/24" is accepted but "192.0.2.1/24" is not. # Similarly, for IPv6, "2001:db8::/32" is accepted whereas "2001:db8::1/32" is # not. The originating IP of a request must be in one of the listed subnets in # order for this Condition to be true. If empty, all IP addresses are allowed. # Corresponds to the JSON property `ipSubnetworks` # @return [Array] attr_accessor :ip_subnetworks # The request must be made by one of the provided user or service accounts. # Groups are not supported. Syntax: `user:`emailid`` `serviceAccount:`emailid`` # If not specified, a request may come from any user. # Corresponds to the JSON property `members` # @return [Array] attr_accessor :members # Whether to negate the Condition. If true, the Condition becomes a NAND over # its non-empty fields, each field must be false for the Condition overall to be # satisfied. Defaults to false. # Corresponds to the JSON property `negate` # @return [Boolean] attr_accessor :negate alias_method :negate?, :negate # The request must originate from one of the provided countries/regions. Must be # valid ISO 3166-1 alpha-2 codes. # Corresponds to the JSON property `regions` # @return [Array] attr_accessor :regions # A list of other access levels defined in the same `Policy`, referenced by # resource name. Referencing an `AccessLevel` which does not exist is an error. # All access levels listed must be granted for the Condition to be true. Example: # "`accessPolicies/MY_POLICY/accessLevels/LEVEL_NAME"` # Corresponds to the JSON property `requiredAccessLevels` # @return [Array] attr_accessor :required_access_levels def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @device_policy = args[:device_policy] if args.key?(:device_policy) @ip_subnetworks = args[:ip_subnetworks] if args.key?(:ip_subnetworks) @members = args[:members] if args.key?(:members) @negate = args[:negate] if args.key?(:negate) @regions = args[:regions] if args.key?(:regions) @required_access_levels = args[:required_access_levels] if args.key?(:required_access_levels) end end # `CustomLevel` is an `AccessLevel` using the Cloud Common Expression Language # to represent the necessary conditions for the level to apply to a request. See # CEL spec at: https://github.com/google/cel-spec class GoogleIdentityAccesscontextmanagerV1CustomLevel include Google::Apis::Core::Hashable # Represents a textual expression in the Common Expression Language (CEL) syntax. # CEL is a C-like expression language. The syntax and semantics of CEL are # documented at https://github.com/google/cel-spec. Example (Comparison): title: # "Summary size limit" description: "Determines if a summary is less than 100 # chars" expression: "document.summary.size() < 100" Example (Equality): title: " # Requestor is owner" description: "Determines if requestor is the document # owner" expression: "document.owner == request.auth.claims.email" Example ( # Logic): title: "Public documents" description: "Determine whether the document # should be publicly visible" expression: "document.type != 'private' && # document.type != 'internal'" Example (Data Manipulation): title: "Notification # string" description: "Create a notification string with a timestamp." # expression: "'New message received at ' + string(document.create_time)" The # exact variables and functions that may be referenced within an expression are # determined by the service that evaluates it. See the service documentation for # additional information. # Corresponds to the JSON property `expr` # @return [Google::Apis::CloudassetV1::Expr] attr_accessor :expr def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @expr = args[:expr] if args.key?(:expr) end end # `DevicePolicy` specifies device specific restrictions necessary to acquire a # given access level. A `DevicePolicy` specifies requirements for requests from # devices to be granted access levels, it does not do any enforcement on the # device. `DevicePolicy` acts as an AND over all specified fields, and each # repeated field is an OR over its elements. Any unset fields are ignored. For # example, if the proto is ` os_type : DESKTOP_WINDOWS, os_type : DESKTOP_LINUX, # encryption_status: ENCRYPTED`, then the DevicePolicy will be true for requests # originating from encrypted Linux desktops and encrypted Windows desktops. class GoogleIdentityAccesscontextmanagerV1DevicePolicy include Google::Apis::Core::Hashable # Allowed device management levels, an empty list allows all management levels. # Corresponds to the JSON property `allowedDeviceManagementLevels` # @return [Array] attr_accessor :allowed_device_management_levels # Allowed encryptions statuses, an empty list allows all statuses. # Corresponds to the JSON property `allowedEncryptionStatuses` # @return [Array] attr_accessor :allowed_encryption_statuses # Allowed OS versions, an empty list allows all types and all versions. # Corresponds to the JSON property `osConstraints` # @return [Array] attr_accessor :os_constraints # Whether the device needs to be approved by the customer admin. # Corresponds to the JSON property `requireAdminApproval` # @return [Boolean] attr_accessor :require_admin_approval alias_method :require_admin_approval?, :require_admin_approval # Whether the device needs to be corp owned. # Corresponds to the JSON property `requireCorpOwned` # @return [Boolean] attr_accessor :require_corp_owned alias_method :require_corp_owned?, :require_corp_owned # Whether or not screenlock is required for the DevicePolicy to be true. # Defaults to `false`. # Corresponds to the JSON property `requireScreenlock` # @return [Boolean] attr_accessor :require_screenlock alias_method :require_screenlock?, :require_screenlock def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @allowed_device_management_levels = args[:allowed_device_management_levels] if args.key?(:allowed_device_management_levels) @allowed_encryption_statuses = args[:allowed_encryption_statuses] if args.key?(:allowed_encryption_statuses) @os_constraints = args[:os_constraints] if args.key?(:os_constraints) @require_admin_approval = args[:require_admin_approval] if args.key?(:require_admin_approval) @require_corp_owned = args[:require_corp_owned] if args.key?(:require_corp_owned) @require_screenlock = args[:require_screenlock] if args.key?(:require_screenlock) end end # Defines the conditions under which an EgressPolicy matches a request. # Conditions based on information about the source of the request. Note that if # the destination of the request is protected by a ServicePerimeter, then that # ServicePerimeter must have an IngressPolicy which allows access in order for # this request to succeed. class GoogleIdentityAccesscontextmanagerV1EgressFrom include Google::Apis::Core::Hashable # A list of identities that are allowed access through this [EgressPolicy]. # Should be in the format of email address. The email address should represent # individual user or service account only. # Corresponds to the JSON property `identities` # @return [Array] attr_accessor :identities # Specifies the type of identities that are allowed access to outside the # perimeter. If left unspecified, then members of `identities` field will be # allowed access. # Corresponds to the JSON property `identityType` # @return [String] attr_accessor :identity_type def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @identities = args[:identities] if args.key?(:identities) @identity_type = args[:identity_type] if args.key?(:identity_type) end end # Policy for egress from perimeter. EgressPolicies match requests based on ` # egress_from` and `egress_to` stanzas. For an EgressPolicy to match, both ` # egress_from` and `egress_to` stanzas must be matched. If an EgressPolicy # matches a request, the request is allowed to span the ServicePerimeter # boundary. For example, an EgressPolicy can be used to allow VMs on networks # within the ServicePerimeter to access a defined set of projects outside the # perimeter in certain contexts (e.g. to read data from a Cloud Storage bucket # or query against a BigQuery dataset). EgressPolicies are concerned with the * # resources* that a request relates as well as the API services and API actions # being used. They do not related to the direction of data movement. More # detailed documentation for this concept can be found in the descriptions of # EgressFrom and EgressTo. class GoogleIdentityAccesscontextmanagerV1EgressPolicy include Google::Apis::Core::Hashable # Defines the conditions under which an EgressPolicy matches a request. # Conditions based on information about the source of the request. Note that if # the destination of the request is protected by a ServicePerimeter, then that # ServicePerimeter must have an IngressPolicy which allows access in order for # this request to succeed. # Corresponds to the JSON property `egressFrom` # @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1EgressFrom] attr_accessor :egress_from # Defines the conditions under which an EgressPolicy matches a request. # Conditions are based on information about the ApiOperation intended to be # performed on the `resources` specified. Note that if the destination of the # request is protected by a ServicePerimeter, then that ServicePerimeter must # have an IngressPolicy which allows access in order for this request to succeed. # Corresponds to the JSON property `egressTo` # @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1EgressTo] attr_accessor :egress_to def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @egress_from = args[:egress_from] if args.key?(:egress_from) @egress_to = args[:egress_to] if args.key?(:egress_to) end end # Defines the conditions under which an EgressPolicy matches a request. # Conditions are based on information about the ApiOperation intended to be # performed on the `resources` specified. Note that if the destination of the # request is protected by a ServicePerimeter, then that ServicePerimeter must # have an IngressPolicy which allows access in order for this request to succeed. class GoogleIdentityAccesscontextmanagerV1EgressTo include Google::Apis::Core::Hashable # A list of ApiOperations that this egress rule applies to. A request matches if # it contains an operation/service in this list. # Corresponds to the JSON property `operations` # @return [Array] attr_accessor :operations # A list of resources, currently only projects in the form `projects/`, that # match this to stanza. A request matches if it contains a resource in this list. # If `*` is specified for resources, then this EgressTo rule will authorize # access to all resources outside the perimeter. # Corresponds to the JSON property `resources` # @return [Array] attr_accessor :resources def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @operations = args[:operations] if args.key?(:operations) @resources = args[:resources] if args.key?(:resources) end end # Defines the conditions under which an IngressPolicy matches a request. # Conditions are based on information about the source of the request. class GoogleIdentityAccesscontextmanagerV1IngressFrom include Google::Apis::Core::Hashable # A list of identities that are allowed access through this ingress policy. # Should be in the format of email address. The email address should represent # individual user or service account only. # Corresponds to the JSON property `identities` # @return [Array] attr_accessor :identities # Specifies the type of identities that are allowed access from outside the # perimeter. If left unspecified, then members of `identities` field will be # allowed access. # Corresponds to the JSON property `identityType` # @return [String] attr_accessor :identity_type # Sources that this IngressPolicy authorizes access from. # Corresponds to the JSON property `sources` # @return [Array] attr_accessor :sources def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @identities = args[:identities] if args.key?(:identities) @identity_type = args[:identity_type] if args.key?(:identity_type) @sources = args[:sources] if args.key?(:sources) end end # Policy for ingress into ServicePerimeter. IngressPolicies match requests based # on `ingress_from` and `ingress_to` stanzas. For an ingress policy to match, # both the `ingress_from` and `ingress_to` stanzas must be matched. If an # IngressPolicy matches a request, the request is allowed through the perimeter # boundary from outside the perimeter. For example, access from the internet can # be allowed either based on an AccessLevel or, for traffic hosted on Google # Cloud, the project of the source network. For access from private networks, # using the project of the hosting network is required. Individual ingress # policies can be limited by restricting which services and/or actions they # match using the `ingress_to` field. class GoogleIdentityAccesscontextmanagerV1IngressPolicy include Google::Apis::Core::Hashable # Defines the conditions under which an IngressPolicy matches a request. # Conditions are based on information about the source of the request. # Corresponds to the JSON property `ingressFrom` # @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1IngressFrom] attr_accessor :ingress_from # Defines the conditions under which an IngressPolicy matches a request. # Conditions are based on information about the ApiOperation intended to be # performed on the destination of the request. # Corresponds to the JSON property `ingressTo` # @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1IngressTo] attr_accessor :ingress_to def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @ingress_from = args[:ingress_from] if args.key?(:ingress_from) @ingress_to = args[:ingress_to] if args.key?(:ingress_to) end end # The source that IngressPolicy authorizes access from. class GoogleIdentityAccesscontextmanagerV1IngressSource include Google::Apis::Core::Hashable # An AccessLevel resource name that allow resources within the ServicePerimeters # to be accessed from the internet. AccessLevels listed must be in the same # policy as this ServicePerimeter. Referencing a nonexistent AccessLevel will # cause an error. If no AccessLevel names are listed, resources within the # perimeter can only be accessed via Google Cloud calls with request origins # within the perimeter. Example: `accessPolicies/MY_POLICY/accessLevels/MY_LEVEL` # . If `*` is specified, then all IngressSources will be allowed. # Corresponds to the JSON property `accessLevel` # @return [String] attr_accessor :access_level # A Google Cloud resource that is allowed to ingress the perimeter. Requests # from these resources will be allowed to access perimeter data. Currently only # projects are allowed. Format: `projects/`project_number`` The project may be # in any Google Cloud organization, not just the organization that the perimeter # is defined in. `*` is not allowed, the case of allowing all Google Cloud # resources only is not supported. # Corresponds to the JSON property `resource` # @return [String] attr_accessor :resource def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @access_level = args[:access_level] if args.key?(:access_level) @resource = args[:resource] if args.key?(:resource) end end # Defines the conditions under which an IngressPolicy matches a request. # Conditions are based on information about the ApiOperation intended to be # performed on the destination of the request. class GoogleIdentityAccesscontextmanagerV1IngressTo include Google::Apis::Core::Hashable # A list of ApiOperations the sources specified in corresponding IngressFrom are # allowed to perform in this ServicePerimeter. # Corresponds to the JSON property `operations` # @return [Array] attr_accessor :operations # A list of resources, currently only projects in the form `projects/`, # protected by this ServicePerimeter that are allowed to be accessed by sources # defined in the corresponding IngressFrom. A request matches if it contains a # resource in this list. If `*` is specified for resources, then this IngressTo # rule will authorize access to all resources inside the perimeter, provided # that the request also matches the `operations` field. # Corresponds to the JSON property `resources` # @return [Array] attr_accessor :resources def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @operations = args[:operations] if args.key?(:operations) @resources = args[:resources] if args.key?(:resources) end end # An allowed method or permission of a service specified in ApiOperation. class GoogleIdentityAccesscontextmanagerV1MethodSelector include Google::Apis::Core::Hashable # Value for `method` should be a valid method name for the corresponding ` # service_name` in ApiOperation. If `*` used as value for `method`, then ALL # methods and permissions are allowed. # Corresponds to the JSON property `method` # @return [String] attr_accessor :method_prop # Value for `permission` should be a valid Cloud IAM permission for the # corresponding `service_name` in ApiOperation. # Corresponds to the JSON property `permission` # @return [String] attr_accessor :permission def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @method_prop = args[:method_prop] if args.key?(:method_prop) @permission = args[:permission] if args.key?(:permission) end end # A restriction on the OS type and version of devices making requests. class GoogleIdentityAccesscontextmanagerV1OsConstraint include Google::Apis::Core::Hashable # The minimum allowed OS version. If not set, any version of this OS satisfies # the constraint. Format: `"major.minor.patch"`. Examples: `"10.5.301"`, `"9.2.1" # `. # Corresponds to the JSON property `minimumVersion` # @return [String] attr_accessor :minimum_version # Required. The allowed OS type. # Corresponds to the JSON property `osType` # @return [String] attr_accessor :os_type # Only allows requests from devices with a verified Chrome OS. Verifications # includes requirements that the device is enterprise-managed, conformant to # domain policies, and the caller has permission to call the API targeted by the # request. # Corresponds to the JSON property `requireVerifiedChromeOs` # @return [Boolean] attr_accessor :require_verified_chrome_os alias_method :require_verified_chrome_os?, :require_verified_chrome_os def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @minimum_version = args[:minimum_version] if args.key?(:minimum_version) @os_type = args[:os_type] if args.key?(:os_type) @require_verified_chrome_os = args[:require_verified_chrome_os] if args.key?(:require_verified_chrome_os) end end # `ServicePerimeter` describes a set of Google Cloud resources which can freely # import and export data amongst themselves, but not export outside of the ` # ServicePerimeter`. If a request with a source within this `ServicePerimeter` # has a target outside of the `ServicePerimeter`, the request will be blocked. # Otherwise the request is allowed. There are two types of Service Perimeter - # Regular and Bridge. Regular Service Perimeters cannot overlap, a single Google # Cloud project can only belong to a single regular Service Perimeter. Service # Perimeter Bridges can contain only Google Cloud projects as members, a single # Google Cloud project may belong to multiple Service Perimeter Bridges. class GoogleIdentityAccesscontextmanagerV1ServicePerimeter include Google::Apis::Core::Hashable # Description of the `ServicePerimeter` and its use. Does not affect behavior. # Corresponds to the JSON property `description` # @return [String] attr_accessor :description # Required. Resource name for the ServicePerimeter. The `short_name` component # must begin with a letter and only include alphanumeric and '_'. Format: ` # accessPolicies/`policy_id`/servicePerimeters/`short_name`` # Corresponds to the JSON property `name` # @return [String] attr_accessor :name # Perimeter type indicator. A single project is allowed to be a member of single # regular perimeter, but multiple service perimeter bridges. A project cannot be # a included in a perimeter bridge without being included in regular perimeter. # For perimeter bridges, the restricted service list as well as access level # lists must be empty. # Corresponds to the JSON property `perimeterType` # @return [String] attr_accessor :perimeter_type # `ServicePerimeterConfig` specifies a set of Google Cloud resources that # describe specific Service Perimeter configuration. # Corresponds to the JSON property `spec` # @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1ServicePerimeterConfig] attr_accessor :spec # `ServicePerimeterConfig` specifies a set of Google Cloud resources that # describe specific Service Perimeter configuration. # Corresponds to the JSON property `status` # @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1ServicePerimeterConfig] attr_accessor :status # Human readable title. Must be unique within the Policy. # Corresponds to the JSON property `title` # @return [String] attr_accessor :title # Use explicit dry run spec flag. Ordinarily, a dry-run spec implicitly exists # for all Service Perimeters, and that spec is identical to the status for those # Service Perimeters. When this flag is set, it inhibits the generation of the # implicit spec, thereby allowing the user to explicitly provide a configuration # ("spec") to use in a dry-run version of the Service Perimeter. This allows the # user to test changes to the enforced config ("status") without actually # enforcing them. This testing is done through analyzing the differences between # currently enforced and suggested restrictions. use_explicit_dry_run_spec must # bet set to True if any of the fields in the spec are set to non-default values. # Corresponds to the JSON property `useExplicitDryRunSpec` # @return [Boolean] attr_accessor :use_explicit_dry_run_spec alias_method :use_explicit_dry_run_spec?, :use_explicit_dry_run_spec def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @description = args[:description] if args.key?(:description) @name = args[:name] if args.key?(:name) @perimeter_type = args[:perimeter_type] if args.key?(:perimeter_type) @spec = args[:spec] if args.key?(:spec) @status = args[:status] if args.key?(:status) @title = args[:title] if args.key?(:title) @use_explicit_dry_run_spec = args[:use_explicit_dry_run_spec] if args.key?(:use_explicit_dry_run_spec) end end # `ServicePerimeterConfig` specifies a set of Google Cloud resources that # describe specific Service Perimeter configuration. class GoogleIdentityAccesscontextmanagerV1ServicePerimeterConfig include Google::Apis::Core::Hashable # A list of `AccessLevel` resource names that allow resources within the ` # ServicePerimeter` to be accessed from the internet. `AccessLevels` listed must # be in the same policy as this `ServicePerimeter`. Referencing a nonexistent ` # AccessLevel` is a syntax error. If no `AccessLevel` names are listed, # resources within the perimeter can only be accessed via Google Cloud calls # with request origins within the perimeter. Example: `"accessPolicies/MY_POLICY/ # accessLevels/MY_LEVEL"`. For Service Perimeter Bridge, must be empty. # Corresponds to the JSON property `accessLevels` # @return [Array] attr_accessor :access_levels # List of EgressPolicies to apply to the perimeter. A perimeter may have # multiple EgressPolicies, each of which is evaluated separately. Access is # granted if any EgressPolicy grants it. Must be empty for a perimeter bridge. # Corresponds to the JSON property `egressPolicies` # @return [Array] attr_accessor :egress_policies # List of IngressPolicies to apply to the perimeter. A perimeter may have # multiple IngressPolicies, each of which is evaluated separately. Access is # granted if any Ingress Policy grants it. Must be empty for a perimeter bridge. # Corresponds to the JSON property `ingressPolicies` # @return [Array] attr_accessor :ingress_policies # A list of Google Cloud resources that are inside of the service perimeter. # Currently only projects are allowed. Format: `projects/`project_number`` # Corresponds to the JSON property `resources` # @return [Array] attr_accessor :resources # Google Cloud services that are subject to the Service Perimeter restrictions. # For example, if `storage.googleapis.com` is specified, access to the storage # buckets inside the perimeter must meet the perimeter's access restrictions. # Corresponds to the JSON property `restrictedServices` # @return [Array] attr_accessor :restricted_services # Specifies how APIs are allowed to communicate within the Service Perimeter. # Corresponds to the JSON property `vpcAccessibleServices` # @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1VpcAccessibleServices] attr_accessor :vpc_accessible_services def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @access_levels = args[:access_levels] if args.key?(:access_levels) @egress_policies = args[:egress_policies] if args.key?(:egress_policies) @ingress_policies = args[:ingress_policies] if args.key?(:ingress_policies) @resources = args[:resources] if args.key?(:resources) @restricted_services = args[:restricted_services] if args.key?(:restricted_services) @vpc_accessible_services = args[:vpc_accessible_services] if args.key?(:vpc_accessible_services) end end # Specifies how APIs are allowed to communicate within the Service Perimeter. class GoogleIdentityAccesscontextmanagerV1VpcAccessibleServices include Google::Apis::Core::Hashable # The list of APIs usable within the Service Perimeter. Must be empty unless ' # enable_restriction' is True. You can specify a list of individual services, as # well as include the 'RESTRICTED-SERVICES' value, which automatically includes # all of the services protected by the perimeter. # Corresponds to the JSON property `allowedServices` # @return [Array] attr_accessor :allowed_services # Whether to restrict API calls within the Service Perimeter to the list of APIs # specified in 'allowed_services'. # Corresponds to the JSON property `enableRestriction` # @return [Boolean] attr_accessor :enable_restriction alias_method :enable_restriction?, :enable_restriction def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @allowed_services = args[:allowed_services] if args.key?(:allowed_services) @enable_restriction = args[:enable_restriction] if args.key?(:enable_restriction) end end # An analysis message to group the query and results. class IamPolicyAnalysis include Google::Apis::Core::Hashable # ## LINT.IfChange Keep in sync with ## logs/proto/cloud_asset_inventory/ # iam_policy_analyzer_log.proto IAM policy analysis query message. # Corresponds to the JSON property `analysisQuery` # @return [Google::Apis::CloudassetV1::IamPolicyAnalysisQuery] attr_accessor :analysis_query # A list of IamPolicyAnalysisResult that matches the analysis query, or empty if # no result is found. # Corresponds to the JSON property `analysisResults` # @return [Array] attr_accessor :analysis_results # Represents whether all entries in the analysis_results have been fully # explored to answer the query. # Corresponds to the JSON property `fullyExplored` # @return [Boolean] attr_accessor :fully_explored alias_method :fully_explored?, :fully_explored # A list of non-critical errors happened during the query handling. # Corresponds to the JSON property `nonCriticalErrors` # @return [Array] attr_accessor :non_critical_errors def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @analysis_query = args[:analysis_query] if args.key?(:analysis_query) @analysis_results = args[:analysis_results] if args.key?(:analysis_results) @fully_explored = args[:fully_explored] if args.key?(:fully_explored) @non_critical_errors = args[:non_critical_errors] if args.key?(:non_critical_errors) end end # Output configuration for export IAM policy analysis destination. class IamPolicyAnalysisOutputConfig include Google::Apis::Core::Hashable # A BigQuery destination. # Corresponds to the JSON property `bigqueryDestination` # @return [Google::Apis::CloudassetV1::GoogleCloudAssetV1BigQueryDestination] attr_accessor :bigquery_destination # A Cloud Storage location. # Corresponds to the JSON property `gcsDestination` # @return [Google::Apis::CloudassetV1::GoogleCloudAssetV1GcsDestination] attr_accessor :gcs_destination def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @bigquery_destination = args[:bigquery_destination] if args.key?(:bigquery_destination) @gcs_destination = args[:gcs_destination] if args.key?(:gcs_destination) end end # ## LINT.IfChange Keep in sync with ## logs/proto/cloud_asset_inventory/ # iam_policy_analyzer_log.proto IAM policy analysis query message. class IamPolicyAnalysisQuery include Google::Apis::Core::Hashable # Specifies roles and/or permissions to analyze, to determine both the # identities possessing them and the resources they control. If multiple values # are specified, results will include roles or permissions matching any of them. # The total number of roles and permissions should be equal or less than 10. # Corresponds to the JSON property `accessSelector` # @return [Google::Apis::CloudassetV1::AccessSelector] attr_accessor :access_selector # Specifies an identity for which to determine resource access, based on roles # assigned either directly to them or to the groups they belong to, directly or # indirectly. # Corresponds to the JSON property `identitySelector` # @return [Google::Apis::CloudassetV1::IdentitySelector] attr_accessor :identity_selector # Contains query options. # Corresponds to the JSON property `options` # @return [Google::Apis::CloudassetV1::Options] attr_accessor :options # Specifies the resource to analyze for access policies, which may be set # directly on the resource, or on ancestors such as organizations, folders or # projects. # Corresponds to the JSON property `resourceSelector` # @return [Google::Apis::CloudassetV1::ResourceSelector] attr_accessor :resource_selector # Required. The relative name of the root asset. Only resources and IAM policies # within the scope will be analyzed. This can only be an organization number ( # such as "organizations/123"), a folder number (such as "folders/123"), a # project ID (such as "projects/my-project-id"), or a project number (such as " # projects/12345"). To know how to get organization id, visit [here ](https:// # cloud.google.com/resource-manager/docs/creating-managing-organization# # retrieving_your_organization_id). To know how to get folder or project id, # visit [here ](https://cloud.google.com/resource-manager/docs/creating-managing- # folders#viewing_or_listing_folders_and_projects). # Corresponds to the JSON property `scope` # @return [String] attr_accessor :scope def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @access_selector = args[:access_selector] if args.key?(:access_selector) @identity_selector = args[:identity_selector] if args.key?(:identity_selector) @options = args[:options] if args.key?(:options) @resource_selector = args[:resource_selector] if args.key?(:resource_selector) @scope = args[:scope] if args.key?(:scope) end end # IAM Policy analysis result, consisting of one IAM policy binding and derived # access control lists. class IamPolicyAnalysisResult include Google::Apis::Core::Hashable # The access control lists derived from the iam_binding that match or # potentially match resource and access selectors specified in the request. # Corresponds to the JSON property `accessControlLists` # @return [Array] attr_accessor :access_control_lists # The [full resource name](https://cloud.google.com/asset-inventory/docs/ # resource-name-format) of the resource to which the iam_binding policy attaches. # Corresponds to the JSON property `attachedResourceFullName` # @return [String] attr_accessor :attached_resource_full_name # Represents whether all analyses on the iam_binding have successfully finished. # Corresponds to the JSON property `fullyExplored` # @return [Boolean] attr_accessor :fully_explored alias_method :fully_explored?, :fully_explored # Associates `members` with a `role`. # Corresponds to the JSON property `iamBinding` # @return [Google::Apis::CloudassetV1::Binding] attr_accessor :iam_binding # The identities and group edges. # Corresponds to the JSON property `identityList` # @return [Google::Apis::CloudassetV1::GoogleCloudAssetV1IdentityList] attr_accessor :identity_list def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @access_control_lists = args[:access_control_lists] if args.key?(:access_control_lists) @attached_resource_full_name = args[:attached_resource_full_name] if args.key?(:attached_resource_full_name) @fully_explored = args[:fully_explored] if args.key?(:fully_explored) @iam_binding = args[:iam_binding] if args.key?(:iam_binding) @identity_list = args[:identity_list] if args.key?(:identity_list) end end # Represents the detailed state of an entity under analysis, such as a resource, # an identity or an access. class IamPolicyAnalysisState include Google::Apis::Core::Hashable # The human-readable description of the cause of failure. # Corresponds to the JSON property `cause` # @return [String] attr_accessor :cause # The Google standard error code that best describes the state. For example: - # OK means the analysis on this entity has been successfully finished; - # PERMISSION_DENIED means an access denied error is encountered; - # DEADLINE_EXCEEDED means the analysis on this entity hasn't been started in # time; # Corresponds to the JSON property `code` # @return [String] attr_accessor :code def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @cause = args[:cause] if args.key?(:cause) @code = args[:code] if args.key?(:code) end end # A result of IAM Policy search, containing information of an IAM policy. class IamPolicySearchResult include Google::Apis::Core::Hashable # Explanation about the IAM policy search result. # Corresponds to the JSON property `explanation` # @return [Google::Apis::CloudassetV1::Explanation] attr_accessor :explanation # An Identity and Access Management (IAM) policy, which specifies access # controls for Google Cloud resources. A `Policy` is a collection of `bindings`. # A `binding` binds one or more `members` to a single `role`. Members can be # user accounts, service accounts, Google groups, and domains (such as G Suite). # A `role` is a named list of permissions; each `role` can be an IAM predefined # role or a user-created custom role. For some types of Google Cloud resources, # a `binding` can also specify a `condition`, which is a logical expression that # allows access to a resource only if the expression evaluates to `true`. A # condition can add constraints based on attributes of the request, the resource, # or both. To learn which resources support conditions in their IAM policies, # see the [IAM documentation](https://cloud.google.com/iam/help/conditions/ # resource-policies). **JSON example:** ` "bindings": [ ` "role": "roles/ # resourcemanager.organizationAdmin", "members": [ "user:mike@example.com", " # group:admins@example.com", "domain:google.com", "serviceAccount:my-project-id@ # appspot.gserviceaccount.com" ] `, ` "role": "roles/resourcemanager. # organizationViewer", "members": [ "user:eve@example.com" ], "condition": ` " # title": "expirable access", "description": "Does not grant access after Sep # 2020", "expression": "request.time < timestamp('2020-10-01T00:00:00.000Z')", ` # ` ], "etag": "BwWWja0YfJA=", "version": 3 ` **YAML example:** bindings: - # members: - user:mike@example.com - group:admins@example.com - domain:google. # com - serviceAccount:my-project-id@appspot.gserviceaccount.com role: roles/ # resourcemanager.organizationAdmin - members: - user:eve@example.com role: # roles/resourcemanager.organizationViewer condition: title: expirable access # description: Does not grant access after Sep 2020 expression: request.time < # timestamp('2020-10-01T00:00:00.000Z') - etag: BwWWja0YfJA= - version: 3 For a # description of IAM and its features, see the [IAM documentation](https://cloud. # google.com/iam/docs/). # Corresponds to the JSON property `policy` # @return [Google::Apis::CloudassetV1::Policy] attr_accessor :policy # Optional. The project that the associated GCP resource belongs to, in the form # of projects/`PROJECT_NUMBER`. If an IAM policy is set on a resource (like VM # instance, Cloud Storage bucket), the project field will indicate the project # that contains the resource. If an IAM policy is set on a folder or orgnization, # the project field will be empty. To search against the `project`: * specify # the `scope` field as this project in your search request. # Corresponds to the JSON property `project` # @return [String] attr_accessor :project # Required. The full resource name of the resource associated with this IAM # policy. Example: `//compute.googleapis.com/projects/my_project_123/zones/zone1/ # instances/instance1`. See [Cloud Asset Inventory Resource Name Format](https:// # cloud.google.com/asset-inventory/docs/resource-name-format) for more # information. To search against the `resource`: * use a field query. Example: ` # resource:organizations/123` # Corresponds to the JSON property `resource` # @return [String] attr_accessor :resource def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @explanation = args[:explanation] if args.key?(:explanation) @policy = args[:policy] if args.key?(:policy) @project = args[:project] if args.key?(:project) @resource = args[:resource] if args.key?(:resource) end end # Specifies an identity for which to determine resource access, based on roles # assigned either directly to them or to the groups they belong to, directly or # indirectly. class IdentitySelector include Google::Apis::Core::Hashable # Required. The identity appear in the form of members in [IAM policy binding]( # https://cloud.google.com/iam/reference/rest/v1/Binding). The examples of # supported forms are: "user:mike@example.com", "group:admins@example.com", " # domain:google.com", "serviceAccount:my-project-id@appspot.gserviceaccount.com". # Notice that wildcard characters (such as * and ?) are not supported. You must # give a specific identity. # Corresponds to the JSON property `identity` # @return [String] attr_accessor :identity def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @identity = args[:identity] if args.key?(:identity) end end # The inventory details of a VM. class Inventory include Google::Apis::Core::Hashable # Inventory items related to the VM keyed by an opaque unique identifier for # each inventory item. The identifier is unique to each distinct and addressable # inventory item and will change, when there is a new package version. # Corresponds to the JSON property `items` # @return [Hash] attr_accessor :items # Operating system information for the VM. # Corresponds to the JSON property `osInfo` # @return [Google::Apis::CloudassetV1::OsInfo] attr_accessor :os_info def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @items = args[:items] if args.key?(:items) @os_info = args[:os_info] if args.key?(:os_info) end end # A single piece of inventory on a VM. class Item include Google::Apis::Core::Hashable # Software package information of the operating system. # Corresponds to the JSON property `availablePackage` # @return [Google::Apis::CloudassetV1::SoftwarePackage] attr_accessor :available_package # When this inventory item was first detected. # Corresponds to the JSON property `createTime` # @return [String] attr_accessor :create_time # Identifier for this item, unique across items for this VM. # Corresponds to the JSON property `id` # @return [String] attr_accessor :id # Software package information of the operating system. # Corresponds to the JSON property `installedPackage` # @return [Google::Apis::CloudassetV1::SoftwarePackage] attr_accessor :installed_package # The origin of this inventory item. # Corresponds to the JSON property `originType` # @return [String] attr_accessor :origin_type # The specific type of inventory, correlating to its specific details. # Corresponds to the JSON property `type` # @return [String] attr_accessor :type # When this inventory item was last modified. # Corresponds to the JSON property `updateTime` # @return [String] attr_accessor :update_time def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @available_package = args[:available_package] if args.key?(:available_package) @create_time = args[:create_time] if args.key?(:create_time) @id = args[:id] if args.key?(:id) @installed_package = args[:installed_package] if args.key?(:installed_package) @origin_type = args[:origin_type] if args.key?(:origin_type) @type = args[:type] if args.key?(:type) @update_time = args[:update_time] if args.key?(:update_time) end end # class ListFeedsResponse include Google::Apis::Core::Hashable # A list of feeds. # Corresponds to the JSON property `feeds` # @return [Array] attr_accessor :feeds def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @feeds = args[:feeds] if args.key?(:feeds) end end # This resource represents a long-running operation that is the result of a # network API call. class Operation include Google::Apis::Core::Hashable # If the value is `false`, it means the operation is still in progress. If `true` # , the operation is completed, and either `error` or `response` is available. # Corresponds to the JSON property `done` # @return [Boolean] attr_accessor :done alias_method :done?, :done # The `Status` type defines a logical error model that is suitable for different # programming environments, including REST APIs and RPC APIs. It is used by [ # gRPC](https://github.com/grpc). Each `Status` message contains three pieces of # data: error code, error message, and error details. You can find out more # about this error model and how to work with it in the [API Design Guide](https: # //cloud.google.com/apis/design/errors). # Corresponds to the JSON property `error` # @return [Google::Apis::CloudassetV1::Status] attr_accessor :error # Service-specific metadata associated with the operation. It typically contains # progress information and common metadata such as create time. Some services # might not provide such metadata. Any method that returns a long-running # operation should document the metadata type, if any. # Corresponds to the JSON property `metadata` # @return [Hash] attr_accessor :metadata # The server-assigned name, which is only unique within the same service that # originally returns it. If you use the default HTTP mapping, the `name` should # be a resource name ending with `operations/`unique_id``. # Corresponds to the JSON property `name` # @return [String] attr_accessor :name # The normal response of the operation in case of success. If the original # method returns no data on success, such as `Delete`, the response is `google. # protobuf.Empty`. If the original method is standard `Get`/`Create`/`Update`, # the response should be the resource. For other methods, the response should # have the type `XxxResponse`, where `Xxx` is the original method name. For # example, if the original method name is `TakeSnapshot()`, the inferred # response type is `TakeSnapshotResponse`. # Corresponds to the JSON property `response` # @return [Hash] attr_accessor :response def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @done = args[:done] if args.key?(:done) @error = args[:error] if args.key?(:error) @metadata = args[:metadata] if args.key?(:metadata) @name = args[:name] if args.key?(:name) @response = args[:response] if args.key?(:response) end end # Contains query options. class Options include Google::Apis::Core::Hashable # Optional. If true, the response will include access analysis from identities # to resources via service account impersonation. This is a very expensive # operation, because many derived queries will be executed. We highly recommend # you use AssetService.AnalyzeIamPolicyLongrunning rpc instead. For example, if # the request analyzes for which resources user A has permission P, and there's # an IAM policy states user A has iam.serviceAccounts.getAccessToken permission # to a service account SA, and there's another IAM policy states service account # SA has permission P to a GCP folder F, then user A potentially has access to # the GCP folder F. And those advanced analysis results will be included in # AnalyzeIamPolicyResponse.service_account_impersonation_analysis. Another # example, if the request analyzes for who has permission P to a GCP folder F, # and there's an IAM policy states user A has iam.serviceAccounts.actAs # permission to a service account SA, and there's another IAM policy states # service account SA has permission P to the GCP folder F, then user A # potentially has access to the GCP folder F. And those advanced analysis # results will be included in AnalyzeIamPolicyResponse. # service_account_impersonation_analysis. Default is false. # Corresponds to the JSON property `analyzeServiceAccountImpersonation` # @return [Boolean] attr_accessor :analyze_service_account_impersonation alias_method :analyze_service_account_impersonation?, :analyze_service_account_impersonation # Optional. If true, the identities section of the result will expand any Google # groups appearing in an IAM policy binding. If IamPolicyAnalysisQuery. # identity_selector is specified, the identity in the result will be determined # by the selector, and this flag is not allowed to set. Default is false. # Corresponds to the JSON property `expandGroups` # @return [Boolean] attr_accessor :expand_groups alias_method :expand_groups?, :expand_groups # Optional. If true and IamPolicyAnalysisQuery.resource_selector is not # specified, the resource section of the result will expand any resource # attached to an IAM policy to include resources lower in the resource hierarchy. # For example, if the request analyzes for which resources user A has # permission P, and the results include an IAM policy with P on a GCP folder, # the results will also include resources in that folder with permission P. If # true and IamPolicyAnalysisQuery.resource_selector is specified, the resource # section of the result will expand the specified resource to include resources # lower in the resource hierarchy. Only project or lower resources are supported. # Folder and organization resource cannot be used together with this option. # For example, if the request analyzes for which users have permission P on a # GCP project with this option enabled, the results will include all users who # have permission P on that project or any lower resource. Default is false. # Corresponds to the JSON property `expandResources` # @return [Boolean] attr_accessor :expand_resources alias_method :expand_resources?, :expand_resources # Optional. If true, the access section of result will expand any roles # appearing in IAM policy bindings to include their permissions. If # IamPolicyAnalysisQuery.access_selector is specified, the access section of the # result will be determined by the selector, and this flag is not allowed to set. # Default is false. # Corresponds to the JSON property `expandRoles` # @return [Boolean] attr_accessor :expand_roles alias_method :expand_roles?, :expand_roles # Optional. If true, the result will output group identity edges, starting from # the binding's group members, to any expanded identities. Default is false. # Corresponds to the JSON property `outputGroupEdges` # @return [Boolean] attr_accessor :output_group_edges alias_method :output_group_edges?, :output_group_edges # Optional. If true, the result will output resource edges, starting from the # policy attached resource, to any expanded resources. Default is false. # Corresponds to the JSON property `outputResourceEdges` # @return [Boolean] attr_accessor :output_resource_edges alias_method :output_resource_edges?, :output_resource_edges def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @analyze_service_account_impersonation = args[:analyze_service_account_impersonation] if args.key?(:analyze_service_account_impersonation) @expand_groups = args[:expand_groups] if args.key?(:expand_groups) @expand_resources = args[:expand_resources] if args.key?(:expand_resources) @expand_roles = args[:expand_roles] if args.key?(:expand_roles) @output_group_edges = args[:output_group_edges] if args.key?(:output_group_edges) @output_resource_edges = args[:output_resource_edges] if args.key?(:output_resource_edges) end end # Operating system information for the VM. class OsInfo include Google::Apis::Core::Hashable # The system architecture of the operating system. # Corresponds to the JSON property `architecture` # @return [String] attr_accessor :architecture # The VM hostname. # Corresponds to the JSON property `hostname` # @return [String] attr_accessor :hostname # The kernel release of the operating system. # Corresponds to the JSON property `kernelRelease` # @return [String] attr_accessor :kernel_release # The kernel version of the operating system. # Corresponds to the JSON property `kernelVersion` # @return [String] attr_accessor :kernel_version # The operating system long name. For example 'Debian GNU/Linux 9' or 'Microsoft # Window Server 2019 Datacenter'. # Corresponds to the JSON property `longName` # @return [String] attr_accessor :long_name # The current version of the OS Config agent running on the VM. # Corresponds to the JSON property `osconfigAgentVersion` # @return [String] attr_accessor :osconfig_agent_version # The operating system short name. For example, 'windows' or 'debian'. # Corresponds to the JSON property `shortName` # @return [String] attr_accessor :short_name # The version of the operating system. # Corresponds to the JSON property `version` # @return [String] attr_accessor :version def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @architecture = args[:architecture] if args.key?(:architecture) @hostname = args[:hostname] if args.key?(:hostname) @kernel_release = args[:kernel_release] if args.key?(:kernel_release) @kernel_version = args[:kernel_version] if args.key?(:kernel_version) @long_name = args[:long_name] if args.key?(:long_name) @osconfig_agent_version = args[:osconfig_agent_version] if args.key?(:osconfig_agent_version) @short_name = args[:short_name] if args.key?(:short_name) @version = args[:version] if args.key?(:version) end end # Output configuration for export assets destination. class OutputConfig include Google::Apis::Core::Hashable # A BigQuery destination for exporting assets to. # Corresponds to the JSON property `bigqueryDestination` # @return [Google::Apis::CloudassetV1::BigQueryDestination] attr_accessor :bigquery_destination # A Cloud Storage location. # Corresponds to the JSON property `gcsDestination` # @return [Google::Apis::CloudassetV1::GcsDestination] attr_accessor :gcs_destination def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @bigquery_destination = args[:bigquery_destination] if args.key?(:bigquery_destination) @gcs_destination = args[:gcs_destination] if args.key?(:gcs_destination) end end # Specifications of BigQuery partitioned table as export destination. class PartitionSpec include Google::Apis::Core::Hashable # The partition key for BigQuery partitioned table. # Corresponds to the JSON property `partitionKey` # @return [String] attr_accessor :partition_key def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @partition_key = args[:partition_key] if args.key?(:partition_key) end end # IAM permissions class Permissions include Google::Apis::Core::Hashable # A list of permissions. A sample permission string: `compute.disk.get`. # Corresponds to the JSON property `permissions` # @return [Array] attr_accessor :permissions def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @permissions = args[:permissions] if args.key?(:permissions) end end # An Identity and Access Management (IAM) policy, which specifies access # controls for Google Cloud resources. A `Policy` is a collection of `bindings`. # A `binding` binds one or more `members` to a single `role`. Members can be # user accounts, service accounts, Google groups, and domains (such as G Suite). # A `role` is a named list of permissions; each `role` can be an IAM predefined # role or a user-created custom role. For some types of Google Cloud resources, # a `binding` can also specify a `condition`, which is a logical expression that # allows access to a resource only if the expression evaluates to `true`. A # condition can add constraints based on attributes of the request, the resource, # or both. To learn which resources support conditions in their IAM policies, # see the [IAM documentation](https://cloud.google.com/iam/help/conditions/ # resource-policies). **JSON example:** ` "bindings": [ ` "role": "roles/ # resourcemanager.organizationAdmin", "members": [ "user:mike@example.com", " # group:admins@example.com", "domain:google.com", "serviceAccount:my-project-id@ # appspot.gserviceaccount.com" ] `, ` "role": "roles/resourcemanager. # organizationViewer", "members": [ "user:eve@example.com" ], "condition": ` " # title": "expirable access", "description": "Does not grant access after Sep # 2020", "expression": "request.time < timestamp('2020-10-01T00:00:00.000Z')", ` # ` ], "etag": "BwWWja0YfJA=", "version": 3 ` **YAML example:** bindings: - # members: - user:mike@example.com - group:admins@example.com - domain:google. # com - serviceAccount:my-project-id@appspot.gserviceaccount.com role: roles/ # resourcemanager.organizationAdmin - members: - user:eve@example.com role: # roles/resourcemanager.organizationViewer condition: title: expirable access # description: Does not grant access after Sep 2020 expression: request.time < # timestamp('2020-10-01T00:00:00.000Z') - etag: BwWWja0YfJA= - version: 3 For a # description of IAM and its features, see the [IAM documentation](https://cloud. # google.com/iam/docs/). class Policy include Google::Apis::Core::Hashable # Specifies cloud audit logging configuration for this policy. # Corresponds to the JSON property `auditConfigs` # @return [Array] attr_accessor :audit_configs # Associates a list of `members` to a `role`. Optionally, may specify a ` # condition` that determines how and when the `bindings` are applied. Each of # the `bindings` must contain at least one member. # Corresponds to the JSON property `bindings` # @return [Array] attr_accessor :bindings # `etag` is used for optimistic concurrency control as a way to help prevent # simultaneous updates of a policy from overwriting each other. It is strongly # suggested that systems make use of the `etag` in the read-modify-write cycle # to perform policy updates in order to avoid race conditions: An `etag` is # returned in the response to `getIamPolicy`, and systems are expected to put # that etag in the request to `setIamPolicy` to ensure that their change will be # applied to the same version of the policy. **Important:** If you use IAM # Conditions, you must include the `etag` field whenever you call `setIamPolicy`. # If you omit this field, then IAM allows you to overwrite a version `3` policy # with a version `1` policy, and all of the conditions in the version `3` policy # are lost. # Corresponds to the JSON property `etag` # NOTE: Values are automatically base64 encoded/decoded in the client library. # @return [String] attr_accessor :etag # Specifies the format of the policy. Valid values are `0`, `1`, and `3`. # Requests that specify an invalid value are rejected. Any operation that # affects conditional role bindings must specify version `3`. This requirement # applies to the following operations: * Getting a policy that includes a # conditional role binding * Adding a conditional role binding to a policy * # Changing a conditional role binding in a policy * Removing any role binding, # with or without a condition, from a policy that includes conditions ** # Important:** If you use IAM Conditions, you must include the `etag` field # whenever you call `setIamPolicy`. If you omit this field, then IAM allows you # to overwrite a version `3` policy with a version `1` policy, and all of the # conditions in the version `3` policy are lost. If a policy does not include # any conditions, operations on that policy may specify any valid version or # leave the field unset. To learn which resources support conditions in their # IAM policies, see the [IAM documentation](https://cloud.google.com/iam/help/ # conditions/resource-policies). # Corresponds to the JSON property `version` # @return [Fixnum] attr_accessor :version def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @audit_configs = args[:audit_configs] if args.key?(:audit_configs) @bindings = args[:bindings] if args.key?(:bindings) @etag = args[:etag] if args.key?(:etag) @version = args[:version] if args.key?(:version) end end # A Pub/Sub destination. class PubsubDestination include Google::Apis::Core::Hashable # The name of the Pub/Sub topic to publish to. Example: `projects/PROJECT_ID/ # topics/TOPIC_ID`. # Corresponds to the JSON property `topic` # @return [String] attr_accessor :topic def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @topic = args[:topic] if args.key?(:topic) end end # A representation of a Google Cloud resource. class Resource include Google::Apis::Core::Hashable # The content of the resource, in which some sensitive fields are removed and # may not be present. # Corresponds to the JSON property `data` # @return [Hash] attr_accessor :data # The URL of the discovery document containing the resource's JSON schema. # Example: `https://www.googleapis.com/discovery/v1/apis/compute/v1/rest` This # value is unspecified for resources that do not have an API based on a # discovery document, such as Cloud Bigtable. # Corresponds to the JSON property `discoveryDocumentUri` # @return [String] attr_accessor :discovery_document_uri # The JSON schema name listed in the discovery document. Example: `Project` This # value is unspecified for resources that do not have an API based on a # discovery document, such as Cloud Bigtable. # Corresponds to the JSON property `discoveryName` # @return [String] attr_accessor :discovery_name # The location of the resource in Google Cloud, such as its zone and region. For # more information, see https://cloud.google.com/about/locations/. # Corresponds to the JSON property `location` # @return [String] attr_accessor :location # The full name of the immediate parent of this resource. See [Resource Names]( # https://cloud.google.com/apis/design/resource_names#full_resource_name) for # more information. For Google Cloud assets, this value is the parent resource # defined in the [Cloud IAM policy hierarchy](https://cloud.google.com/iam/docs/ # overview#policy_hierarchy). Example: `//cloudresourcemanager.googleapis.com/ # projects/my_project_123` For third-party assets, this field may be set # differently. # Corresponds to the JSON property `parent` # @return [String] attr_accessor :parent # The REST URL for accessing the resource. An HTTP `GET` request using this URL # returns the resource itself. Example: `https://cloudresourcemanager.googleapis. # com/v1/projects/my-project-123` This value is unspecified for resources # without a REST API. # Corresponds to the JSON property `resourceUrl` # @return [String] attr_accessor :resource_url # The API version. Example: `v1` # Corresponds to the JSON property `version` # @return [String] attr_accessor :version def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @data = args[:data] if args.key?(:data) @discovery_document_uri = args[:discovery_document_uri] if args.key?(:discovery_document_uri) @discovery_name = args[:discovery_name] if args.key?(:discovery_name) @location = args[:location] if args.key?(:location) @parent = args[:parent] if args.key?(:parent) @resource_url = args[:resource_url] if args.key?(:resource_url) @version = args[:version] if args.key?(:version) end end # A result of Resource Search, containing information of a cloud resource. class ResourceSearchResult include Google::Apis::Core::Hashable # Optional. The additional searchable attributes of this resource. The # attributes may vary from one resource type to another. Examples: `projectId` # for Project, `dnsName` for DNS ManagedZone. This field contains a subset of # the resource metadata fields that are returned by the List or Get APIs # provided by the corresponding GCP service (e.g., Compute Engine). see [API # references and supported searchable attributes](https://cloud.google.com/asset- # inventory/docs/supported-asset-types#searchable_asset_types) for more # information. You can search values of these fields through free text search. # However, you should not consume the field programically as the field names and # values may change as the GCP service updates to a new incompatible API version. # To search against the `additional_attributes`: * use a free text query to # match the attributes values. Example: to search `additional_attributes = ` # dnsName: "foobar" ``, you can issue a query `foobar`. # Corresponds to the JSON property `additionalAttributes` # @return [Hash] attr_accessor :additional_attributes # Required. The type of this resource. Example: `compute.googleapis.com/Disk`. # To search against the `asset_type`: * specify the `asset_type` field in your # search request. # Corresponds to the JSON property `assetType` # @return [String] attr_accessor :asset_type # Optional. One or more paragraphs of text description of this resource. Maximum # length could be up to 1M bytes. This field is available only when the resource' # s proto contains it. To search against the `description`: * use a field query. # Example: `description:"*important instance*"` * use a free text query. Example: # `"*important instance*"` # Corresponds to the JSON property `description` # @return [String] attr_accessor :description # Optional. The display name of this resource. This field is available only when # the resource's proto contains it. To search against the `display_name`: * use # a field query. Example: `displayName:"My Instance"` * use a free text query. # Example: `"My Instance"` # Corresponds to the JSON property `displayName` # @return [String] attr_accessor :display_name # Optional. Labels associated with this resource. See [Labelling and grouping # GCP resources](https://cloud.google.com/blog/products/gcp/labelling-and- # grouping-your-google-cloud-platform-resources) for more information. This # field is available only when the resource's proto contains it. To search # against the `labels`: * use a field query: - query on any label's key or value. # Example: `labels:prod` - query by a given label. Example: `labels.env:prod` - # query by a given label's existence. Example: `labels.env:*` * use a free text # query. Example: `prod` # Corresponds to the JSON property `labels` # @return [Hash] attr_accessor :labels # Optional. Location can be `global`, regional like `us-east1`, or zonal like ` # us-west1-b`. This field is available only when the resource's proto contains # it. To search against the `location`: * use a field query. Example: `location: # us-west*` * use a free text query. Example: `us-west*` # Corresponds to the JSON property `location` # @return [String] attr_accessor :location # Required. The full resource name of this resource. Example: `//compute. # googleapis.com/projects/my_project_123/zones/zone1/instances/instance1`. See [ # Cloud Asset Inventory Resource Name Format](https://cloud.google.com/asset- # inventory/docs/resource-name-format) for more information. To search against # the `name`: * use a field query. Example: `name:instance1` * use a free text # query. Example: `instance1` # Corresponds to the JSON property `name` # @return [String] attr_accessor :name # Optional. Network tags associated with this resource. Like labels, network # tags are a type of annotations used to group GCP resources. See [Labelling GCP # resources](https://cloud.google.com/blog/products/gcp/labelling-and-grouping- # your-google-cloud-platform-resources) for more information. This field is # available only when the resource's proto contains it. To search against the ` # network_tags`: * use a field query. Example: `networkTags:internal` * use a # free text query. Example: `internal` # Corresponds to the JSON property `networkTags` # @return [Array] attr_accessor :network_tags # Optional. The project that this resource belongs to, in the form of projects/` # PROJECT_NUMBER`. This field is available when the resource belongs to a # project. To search against the `project`: * specify the `scope` field as this # project in your search request. # Corresponds to the JSON property `project` # @return [String] attr_accessor :project def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @additional_attributes = args[:additional_attributes] if args.key?(:additional_attributes) @asset_type = args[:asset_type] if args.key?(:asset_type) @description = args[:description] if args.key?(:description) @display_name = args[:display_name] if args.key?(:display_name) @labels = args[:labels] if args.key?(:labels) @location = args[:location] if args.key?(:location) @name = args[:name] if args.key?(:name) @network_tags = args[:network_tags] if args.key?(:network_tags) @project = args[:project] if args.key?(:project) end end # Specifies the resource to analyze for access policies, which may be set # directly on the resource, or on ancestors such as organizations, folders or # projects. class ResourceSelector include Google::Apis::Core::Hashable # Required. The [full resource name] (https://cloud.google.com/asset-inventory/ # docs/resource-name-format) of a resource of [supported resource types](https:// # cloud.google.com/asset-inventory/docs/supported-asset-types# # analyzable_asset_types). # Corresponds to the JSON property `fullResourceName` # @return [String] attr_accessor :full_resource_name def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @full_resource_name = args[:full_resource_name] if args.key?(:full_resource_name) end end # Search all IAM policies response. class SearchAllIamPoliciesResponse include Google::Apis::Core::Hashable # Set if there are more results than those appearing in this response; to get # the next set of results, call this method again, using this value as the ` # page_token`. # Corresponds to the JSON property `nextPageToken` # @return [String] attr_accessor :next_page_token # A list of IamPolicy that match the search query. Related information such as # the associated resource is returned along with the policy. # Corresponds to the JSON property `results` # @return [Array] attr_accessor :results def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @next_page_token = args[:next_page_token] if args.key?(:next_page_token) @results = args[:results] if args.key?(:results) end end # Search all resources response. class SearchAllResourcesResponse include Google::Apis::Core::Hashable # If there are more results than those appearing in this response, then ` # next_page_token` is included. To get the next set of results, call this method # again using the value of `next_page_token` as `page_token`. # Corresponds to the JSON property `nextPageToken` # @return [String] attr_accessor :next_page_token # A list of Resources that match the search query. It contains the resource # standard metadata information. # Corresponds to the JSON property `results` # @return [Array] attr_accessor :results def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @next_page_token = args[:next_page_token] if args.key?(:next_page_token) @results = args[:results] if args.key?(:results) end end # Software package information of the operating system. class SoftwarePackage include Google::Apis::Core::Hashable # Information related to the a standard versioned package. This includes package # info for APT, Yum, Zypper, and Googet package managers. # Corresponds to the JSON property `aptPackage` # @return [Google::Apis::CloudassetV1::VersionedPackage] attr_accessor :apt_package # Information related to the a standard versioned package. This includes package # info for APT, Yum, Zypper, and Googet package managers. # Corresponds to the JSON property `cosPackage` # @return [Google::Apis::CloudassetV1::VersionedPackage] attr_accessor :cos_package # Information related to the a standard versioned package. This includes package # info for APT, Yum, Zypper, and Googet package managers. # Corresponds to the JSON property `googetPackage` # @return [Google::Apis::CloudassetV1::VersionedPackage] attr_accessor :googet_package # Information related to a Quick Fix Engineering package. Fields are taken from # Windows QuickFixEngineering Interface and match the source names: https://docs. # microsoft.com/en-us/windows/win32/cimwin32prov/win32-quickfixengineering # Corresponds to the JSON property `qfePackage` # @return [Google::Apis::CloudassetV1::WindowsQuickFixEngineeringPackage] attr_accessor :qfe_package # Details related to a Windows Update package. Field data and names are taken # from Windows Update API IUpdate Interface: https://docs.microsoft.com/en-us/ # windows/win32/api/_wua/ Descriptive fields like title, and description are # localized based on the locale of the VM being updated. # Corresponds to the JSON property `wuaPackage` # @return [Google::Apis::CloudassetV1::WindowsUpdatePackage] attr_accessor :wua_package # Information related to the a standard versioned package. This includes package # info for APT, Yum, Zypper, and Googet package managers. # Corresponds to the JSON property `yumPackage` # @return [Google::Apis::CloudassetV1::VersionedPackage] attr_accessor :yum_package # Information related to the a standard versioned package. This includes package # info for APT, Yum, Zypper, and Googet package managers. # Corresponds to the JSON property `zypperPackage` # @return [Google::Apis::CloudassetV1::VersionedPackage] attr_accessor :zypper_package # Details related to a Zypper Patch. # Corresponds to the JSON property `zypperPatch` # @return [Google::Apis::CloudassetV1::ZypperPatch] attr_accessor :zypper_patch def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @apt_package = args[:apt_package] if args.key?(:apt_package) @cos_package = args[:cos_package] if args.key?(:cos_package) @googet_package = args[:googet_package] if args.key?(:googet_package) @qfe_package = args[:qfe_package] if args.key?(:qfe_package) @wua_package = args[:wua_package] if args.key?(:wua_package) @yum_package = args[:yum_package] if args.key?(:yum_package) @zypper_package = args[:zypper_package] if args.key?(:zypper_package) @zypper_patch = args[:zypper_patch] if args.key?(:zypper_patch) end end # The `Status` type defines a logical error model that is suitable for different # programming environments, including REST APIs and RPC APIs. It is used by [ # gRPC](https://github.com/grpc). Each `Status` message contains three pieces of # data: error code, error message, and error details. You can find out more # about this error model and how to work with it in the [API Design Guide](https: # //cloud.google.com/apis/design/errors). class Status include Google::Apis::Core::Hashable # The status code, which should be an enum value of google.rpc.Code. # Corresponds to the JSON property `code` # @return [Fixnum] attr_accessor :code # A list of messages that carry the error details. There is a common set of # message types for APIs to use. # Corresponds to the JSON property `details` # @return [Array>] attr_accessor :details # A developer-facing error message, which should be in English. Any user-facing # error message should be localized and sent in the google.rpc.Status.details # field, or localized by the client. # Corresponds to the JSON property `message` # @return [String] attr_accessor :message def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @code = args[:code] if args.key?(:code) @details = args[:details] if args.key?(:details) @message = args[:message] if args.key?(:message) end end # An asset in Google Cloud and its temporal metadata, including the time window # when it was observed and its status during that window. class TemporalAsset include Google::Apis::Core::Hashable # An asset in Google Cloud. An asset can be any resource in the Google Cloud [ # resource hierarchy](https://cloud.google.com/resource-manager/docs/cloud- # platform-resource-hierarchy), a resource outside the Google Cloud resource # hierarchy (such as Google Kubernetes Engine clusters and objects), or a policy # (e.g. Cloud IAM policy). See [Supported asset types](https://cloud.google.com/ # asset-inventory/docs/supported-asset-types) for more information. # Corresponds to the JSON property `asset` # @return [Google::Apis::CloudassetV1::Asset] attr_accessor :asset # Whether the asset has been deleted or not. # Corresponds to the JSON property `deleted` # @return [Boolean] attr_accessor :deleted alias_method :deleted?, :deleted # An asset in Google Cloud. An asset can be any resource in the Google Cloud [ # resource hierarchy](https://cloud.google.com/resource-manager/docs/cloud- # platform-resource-hierarchy), a resource outside the Google Cloud resource # hierarchy (such as Google Kubernetes Engine clusters and objects), or a policy # (e.g. Cloud IAM policy). See [Supported asset types](https://cloud.google.com/ # asset-inventory/docs/supported-asset-types) for more information. # Corresponds to the JSON property `priorAsset` # @return [Google::Apis::CloudassetV1::Asset] attr_accessor :prior_asset # State of prior_asset. # Corresponds to the JSON property `priorAssetState` # @return [String] attr_accessor :prior_asset_state # A time window specified by its `start_time` and `end_time`. # Corresponds to the JSON property `window` # @return [Google::Apis::CloudassetV1::TimeWindow] attr_accessor :window def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @asset = args[:asset] if args.key?(:asset) @deleted = args[:deleted] if args.key?(:deleted) @prior_asset = args[:prior_asset] if args.key?(:prior_asset) @prior_asset_state = args[:prior_asset_state] if args.key?(:prior_asset_state) @window = args[:window] if args.key?(:window) end end # A time window specified by its `start_time` and `end_time`. class TimeWindow include Google::Apis::Core::Hashable # End time of the time window (inclusive). If not specified, the current # timestamp is used instead. # Corresponds to the JSON property `endTime` # @return [String] attr_accessor :end_time # Start time of the time window (exclusive). # Corresponds to the JSON property `startTime` # @return [String] attr_accessor :start_time def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @end_time = args[:end_time] if args.key?(:end_time) @start_time = args[:start_time] if args.key?(:start_time) end end # Update asset feed request. class UpdateFeedRequest include Google::Apis::Core::Hashable # An asset feed used to export asset updates to a destinations. An asset feed # filter controls what updates are exported. The asset feed must be created # within a project, organization, or folder. Supported destinations are: Pub/Sub # topics. # Corresponds to the JSON property `feed` # @return [Google::Apis::CloudassetV1::Feed] attr_accessor :feed # Required. Only updates the `feed` fields indicated by this mask. The field # mask must not be empty, and it must not contain fields that are immutable or # only set by the server. # Corresponds to the JSON property `updateMask` # @return [String] attr_accessor :update_mask def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @feed = args[:feed] if args.key?(:feed) @update_mask = args[:update_mask] if args.key?(:update_mask) end end # Information related to the a standard versioned package. This includes package # info for APT, Yum, Zypper, and Googet package managers. class VersionedPackage include Google::Apis::Core::Hashable # The system architecture this package is intended for. # Corresponds to the JSON property `architecture` # @return [String] attr_accessor :architecture # The name of the package. # Corresponds to the JSON property `packageName` # @return [String] attr_accessor :package_name # The version of the package. # Corresponds to the JSON property `version` # @return [String] attr_accessor :version def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @architecture = args[:architecture] if args.key?(:architecture) @package_name = args[:package_name] if args.key?(:package_name) @version = args[:version] if args.key?(:version) end end # Information related to a Quick Fix Engineering package. Fields are taken from # Windows QuickFixEngineering Interface and match the source names: https://docs. # microsoft.com/en-us/windows/win32/cimwin32prov/win32-quickfixengineering class WindowsQuickFixEngineeringPackage include Google::Apis::Core::Hashable # A short textual description of the QFE update. # Corresponds to the JSON property `caption` # @return [String] attr_accessor :caption # A textual description of the QFE update. # Corresponds to the JSON property `description` # @return [String] attr_accessor :description # Unique identifier associated with a particular QFE update. # Corresponds to the JSON property `hotFixId` # @return [String] attr_accessor :hot_fix_id # Date that the QFE update was installed. Mapped from installed_on field. # Corresponds to the JSON property `installTime` # @return [String] attr_accessor :install_time def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @caption = args[:caption] if args.key?(:caption) @description = args[:description] if args.key?(:description) @hot_fix_id = args[:hot_fix_id] if args.key?(:hot_fix_id) @install_time = args[:install_time] if args.key?(:install_time) end end # Categories specified by the Windows Update. class WindowsUpdateCategory include Google::Apis::Core::Hashable # The identifier of the windows update category. # Corresponds to the JSON property `id` # @return [String] attr_accessor :id # The name of the windows update category. # Corresponds to the JSON property `name` # @return [String] attr_accessor :name def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @id = args[:id] if args.key?(:id) @name = args[:name] if args.key?(:name) end end # Details related to a Windows Update package. Field data and names are taken # from Windows Update API IUpdate Interface: https://docs.microsoft.com/en-us/ # windows/win32/api/_wua/ Descriptive fields like title, and description are # localized based on the locale of the VM being updated. class WindowsUpdatePackage include Google::Apis::Core::Hashable # The categories that are associated with this update package. # Corresponds to the JSON property `categories` # @return [Array] attr_accessor :categories # The localized description of the update package. # Corresponds to the JSON property `description` # @return [String] attr_accessor :description # A collection of Microsoft Knowledge Base article IDs that are associated with # the update package. # Corresponds to the JSON property `kbArticleIds` # @return [Array] attr_accessor :kb_article_ids # The last published date of the update, in (UTC) date and time. # Corresponds to the JSON property `lastDeploymentChangeTime` # @return [String] attr_accessor :last_deployment_change_time # A collection of URLs that provide more information about the update package. # Corresponds to the JSON property `moreInfoUrls` # @return [Array] attr_accessor :more_info_urls # The revision number of this update package. # Corresponds to the JSON property `revisionNumber` # @return [Fixnum] attr_accessor :revision_number # A hyperlink to the language-specific support information for the update. # Corresponds to the JSON property `supportUrl` # @return [String] attr_accessor :support_url # The localized title of the update package. # Corresponds to the JSON property `title` # @return [String] attr_accessor :title # Gets the identifier of an update package. Stays the same across revisions. # Corresponds to the JSON property `updateId` # @return [String] attr_accessor :update_id def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @categories = args[:categories] if args.key?(:categories) @description = args[:description] if args.key?(:description) @kb_article_ids = args[:kb_article_ids] if args.key?(:kb_article_ids) @last_deployment_change_time = args[:last_deployment_change_time] if args.key?(:last_deployment_change_time) @more_info_urls = args[:more_info_urls] if args.key?(:more_info_urls) @revision_number = args[:revision_number] if args.key?(:revision_number) @support_url = args[:support_url] if args.key?(:support_url) @title = args[:title] if args.key?(:title) @update_id = args[:update_id] if args.key?(:update_id) end end # Details related to a Zypper Patch. class ZypperPatch include Google::Apis::Core::Hashable # The category of the patch. # Corresponds to the JSON property `category` # @return [String] attr_accessor :category # The name of the patch. # Corresponds to the JSON property `patchName` # @return [String] attr_accessor :patch_name # The severity specified for this patch # Corresponds to the JSON property `severity` # @return [String] attr_accessor :severity # Any summary information provided about this patch. # Corresponds to the JSON property `summary` # @return [String] attr_accessor :summary def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @category = args[:category] if args.key?(:category) @patch_name = args[:patch_name] if args.key?(:patch_name) @severity = args[:severity] if args.key?(:severity) @summary = args[:summary] if args.key?(:summary) end end end end end