# Copyright 2020 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

require 'date'
require 'google/apis/core/base_service'
require 'google/apis/core/json_representation'
require 'google/apis/core/hashable'
require 'google/apis/errors'

module Google
  module Apis
    module CloudassetV1
      
      # Specifies roles and/or permissions to analyze, to determine both the
      # identities possessing them and the resources they control. If multiple values
      # are specified, results will include roles or permissions matching any of them.
      # The total number of roles and permissions should be equal or less than 10.
      class AccessSelector
        include Google::Apis::Core::Hashable
      
        # Optional. The permissions to appear in result.
        # Corresponds to the JSON property `permissions`
        # @return [Array<String>]
        attr_accessor :permissions
      
        # Optional. The roles to appear in result.
        # Corresponds to the JSON property `roles`
        # @return [Array<String>]
        attr_accessor :roles
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @permissions = args[:permissions] if args.key?(:permissions)
          @roles = args[:roles] if args.key?(:roles)
        end
      end
      
      # A request message for AssetService.AnalyzeIamPolicyLongrunning.
      class AnalyzeIamPolicyLongrunningRequest
        include Google::Apis::Core::Hashable
      
        # ## LINT.IfChange Keep in sync with ## logs/proto/cloud_asset_inventory/
        # iam_policy_analyzer_log.proto IAM policy analysis query message.
        # Corresponds to the JSON property `analysisQuery`
        # @return [Google::Apis::CloudassetV1::IamPolicyAnalysisQuery]
        attr_accessor :analysis_query
      
        # Output configuration for export IAM policy analysis destination.
        # Corresponds to the JSON property `outputConfig`
        # @return [Google::Apis::CloudassetV1::IamPolicyAnalysisOutputConfig]
        attr_accessor :output_config
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @analysis_query = args[:analysis_query] if args.key?(:analysis_query)
          @output_config = args[:output_config] if args.key?(:output_config)
        end
      end
      
      # A response message for AssetService.AnalyzeIamPolicy.
      class AnalyzeIamPolicyResponse
        include Google::Apis::Core::Hashable
      
        # Represents whether all entries in the main_analysis and
        # service_account_impersonation_analysis have been fully explored to answer the
        # query in the request.
        # Corresponds to the JSON property `fullyExplored`
        # @return [Boolean]
        attr_accessor :fully_explored
        alias_method :fully_explored?, :fully_explored
      
        # An analysis message to group the query and results.
        # Corresponds to the JSON property `mainAnalysis`
        # @return [Google::Apis::CloudassetV1::IamPolicyAnalysis]
        attr_accessor :main_analysis
      
        # The service account impersonation analysis if AnalyzeIamPolicyRequest.
        # analyze_service_account_impersonation is enabled.
        # Corresponds to the JSON property `serviceAccountImpersonationAnalysis`
        # @return [Array<Google::Apis::CloudassetV1::IamPolicyAnalysis>]
        attr_accessor :service_account_impersonation_analysis
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @fully_explored = args[:fully_explored] if args.key?(:fully_explored)
          @main_analysis = args[:main_analysis] if args.key?(:main_analysis)
          @service_account_impersonation_analysis = args[:service_account_impersonation_analysis] if args.key?(:service_account_impersonation_analysis)
        end
      end
      
      # An asset in Google Cloud. An asset can be any resource in the Google Cloud [
      # resource hierarchy](https://cloud.google.com/resource-manager/docs/cloud-
      # platform-resource-hierarchy), a resource outside the Google Cloud resource
      # hierarchy (such as Google Kubernetes Engine clusters and objects), or a policy
      # (e.g. Cloud IAM policy). See [Supported asset types](https://cloud.google.com/
      # asset-inventory/docs/supported-asset-types) for more information.
      class Asset
        include Google::Apis::Core::Hashable
      
        # An `AccessLevel` is a label that can be applied to requests to Google Cloud
        # services, along with a list of requirements necessary for the label to be
        # applied.
        # Corresponds to the JSON property `accessLevel`
        # @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1AccessLevel]
        attr_accessor :access_level
      
        # `AccessPolicy` is a container for `AccessLevels` (which define the necessary
        # attributes to use Google Cloud services) and `ServicePerimeters` (which define
        # regions of services able to freely pass data within a perimeter). An access
        # policy is globally visible within an organization, and the restrictions it
        # specifies apply to all projects within an organization.
        # Corresponds to the JSON property `accessPolicy`
        # @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1AccessPolicy]
        attr_accessor :access_policy
      
        # The ancestry path of an asset in Google Cloud [resource hierarchy](https://
        # cloud.google.com/resource-manager/docs/cloud-platform-resource-hierarchy),
        # represented as a list of relative resource names. An ancestry path starts with
        # the closest ancestor in the hierarchy and ends at root. If the asset is a
        # project, folder, or organization, the ancestry path starts from the asset
        # itself. Example: `["projects/123456789", "folders/5432", "organizations/1234"]`
        # Corresponds to the JSON property `ancestors`
        # @return [Array<String>]
        attr_accessor :ancestors
      
        # The type of the asset. Example: `compute.googleapis.com/Disk` See [Supported
        # asset types](https://cloud.google.com/asset-inventory/docs/supported-asset-
        # types) for more information.
        # Corresponds to the JSON property `assetType`
        # @return [String]
        attr_accessor :asset_type
      
        # An Identity and Access Management (IAM) policy, which specifies access
        # controls for Google Cloud resources. A `Policy` is a collection of `bindings`.
        # A `binding` binds one or more `members` to a single `role`. Members can be
        # user accounts, service accounts, Google groups, and domains (such as G Suite).
        # A `role` is a named list of permissions; each `role` can be an IAM predefined
        # role or a user-created custom role. For some types of Google Cloud resources,
        # a `binding` can also specify a `condition`, which is a logical expression that
        # allows access to a resource only if the expression evaluates to `true`. A
        # condition can add constraints based on attributes of the request, the resource,
        # or both. To learn which resources support conditions in their IAM policies,
        # see the [IAM documentation](https://cloud.google.com/iam/help/conditions/
        # resource-policies). **JSON example:** ` "bindings": [ ` "role": "roles/
        # resourcemanager.organizationAdmin", "members": [ "user:mike@example.com", "
        # group:admins@example.com", "domain:google.com", "serviceAccount:my-project-id@
        # appspot.gserviceaccount.com" ] `, ` "role": "roles/resourcemanager.
        # organizationViewer", "members": [ "user:eve@example.com" ], "condition": ` "
        # title": "expirable access", "description": "Does not grant access after Sep
        # 2020", "expression": "request.time < timestamp('2020-10-01T00:00:00.000Z')", `
        # ` ], "etag": "BwWWja0YfJA=", "version": 3 ` **YAML example:** bindings: -
        # members: - user:mike@example.com - group:admins@example.com - domain:google.
        # com - serviceAccount:my-project-id@appspot.gserviceaccount.com role: roles/
        # resourcemanager.organizationAdmin - members: - user:eve@example.com role:
        # roles/resourcemanager.organizationViewer condition: title: expirable access
        # description: Does not grant access after Sep 2020 expression: request.time <
        # timestamp('2020-10-01T00:00:00.000Z') - etag: BwWWja0YfJA= - version: 3 For a
        # description of IAM and its features, see the [IAM documentation](https://cloud.
        # google.com/iam/docs/).
        # Corresponds to the JSON property `iamPolicy`
        # @return [Google::Apis::CloudassetV1::Policy]
        attr_accessor :iam_policy
      
        # The full name of the asset. Example: `//compute.googleapis.com/projects/
        # my_project_123/zones/zone1/instances/instance1` See [Resource names](https://
        # cloud.google.com/apis/design/resource_names#full_resource_name) for more
        # information.
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # A representation of an [organization policy](https://cloud.google.com/resource-
        # manager/docs/organization-policy/overview#organization_policy). There can be
        # more than one organization policy with different constraints set on a given
        # resource.
        # Corresponds to the JSON property `orgPolicy`
        # @return [Array<Google::Apis::CloudassetV1::GoogleCloudOrgpolicyV1Policy>]
        attr_accessor :org_policy
      
        # The inventory details of a VM.
        # Corresponds to the JSON property `osInventory`
        # @return [Google::Apis::CloudassetV1::Inventory]
        attr_accessor :os_inventory
      
        # A representation of a Google Cloud resource.
        # Corresponds to the JSON property `resource`
        # @return [Google::Apis::CloudassetV1::Resource]
        attr_accessor :resource
      
        # `ServicePerimeter` describes a set of Google Cloud resources which can freely
        # import and export data amongst themselves, but not export outside of the `
        # ServicePerimeter`. If a request with a source within this `ServicePerimeter`
        # has a target outside of the `ServicePerimeter`, the request will be blocked.
        # Otherwise the request is allowed. There are two types of Service Perimeter -
        # Regular and Bridge. Regular Service Perimeters cannot overlap, a single Google
        # Cloud project can only belong to a single regular Service Perimeter. Service
        # Perimeter Bridges can contain only Google Cloud projects as members, a single
        # Google Cloud project may belong to multiple Service Perimeter Bridges.
        # Corresponds to the JSON property `servicePerimeter`
        # @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1ServicePerimeter]
        attr_accessor :service_perimeter
      
        # The last update timestamp of an asset. update_time is updated when create/
        # update/delete operation is performed.
        # Corresponds to the JSON property `updateTime`
        # @return [String]
        attr_accessor :update_time
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @access_level = args[:access_level] if args.key?(:access_level)
          @access_policy = args[:access_policy] if args.key?(:access_policy)
          @ancestors = args[:ancestors] if args.key?(:ancestors)
          @asset_type = args[:asset_type] if args.key?(:asset_type)
          @iam_policy = args[:iam_policy] if args.key?(:iam_policy)
          @name = args[:name] if args.key?(:name)
          @org_policy = args[:org_policy] if args.key?(:org_policy)
          @os_inventory = args[:os_inventory] if args.key?(:os_inventory)
          @resource = args[:resource] if args.key?(:resource)
          @service_perimeter = args[:service_perimeter] if args.key?(:service_perimeter)
          @update_time = args[:update_time] if args.key?(:update_time)
        end
      end
      
      # Specifies the audit configuration for a service. The configuration determines
      # which permission types are logged, and what identities, if any, are exempted
      # from logging. An AuditConfig must have one or more AuditLogConfigs. If there
      # are AuditConfigs for both `allServices` and a specific service, the union of
      # the two AuditConfigs is used for that service: the log_types specified in each
      # AuditConfig are enabled, and the exempted_members in each AuditLogConfig are
      # exempted. Example Policy with multiple AuditConfigs: ` "audit_configs": [ ` "
      # service": "allServices", "audit_log_configs": [ ` "log_type": "DATA_READ", "
      # exempted_members": [ "user:jose@example.com" ] `, ` "log_type": "DATA_WRITE" `,
      # ` "log_type": "ADMIN_READ" ` ] `, ` "service": "sampleservice.googleapis.com",
      # "audit_log_configs": [ ` "log_type": "DATA_READ" `, ` "log_type": "DATA_WRITE"
      # , "exempted_members": [ "user:aliya@example.com" ] ` ] ` ] ` For sampleservice,
      # this policy enables DATA_READ, DATA_WRITE and ADMIN_READ logging. It also
      # exempts jose@example.com from DATA_READ logging, and aliya@example.com from
      # DATA_WRITE logging.
      class AuditConfig
        include Google::Apis::Core::Hashable
      
        # The configuration for logging of each type of permission.
        # Corresponds to the JSON property `auditLogConfigs`
        # @return [Array<Google::Apis::CloudassetV1::AuditLogConfig>]
        attr_accessor :audit_log_configs
      
        # Specifies a service that will be enabled for audit logging. For example, `
        # storage.googleapis.com`, `cloudsql.googleapis.com`. `allServices` is a special
        # value that covers all services.
        # Corresponds to the JSON property `service`
        # @return [String]
        attr_accessor :service
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @audit_log_configs = args[:audit_log_configs] if args.key?(:audit_log_configs)
          @service = args[:service] if args.key?(:service)
        end
      end
      
      # Provides the configuration for logging a type of permissions. Example: ` "
      # audit_log_configs": [ ` "log_type": "DATA_READ", "exempted_members": [ "user:
      # jose@example.com" ] `, ` "log_type": "DATA_WRITE" ` ] ` This enables '
      # DATA_READ' and 'DATA_WRITE' logging, while exempting jose@example.com from
      # DATA_READ logging.
      class AuditLogConfig
        include Google::Apis::Core::Hashable
      
        # Specifies the identities that do not cause logging for this type of permission.
        # Follows the same format of Binding.members.
        # Corresponds to the JSON property `exemptedMembers`
        # @return [Array<String>]
        attr_accessor :exempted_members
      
        # The log type that this config enables.
        # Corresponds to the JSON property `logType`
        # @return [String]
        attr_accessor :log_type
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @exempted_members = args[:exempted_members] if args.key?(:exempted_members)
          @log_type = args[:log_type] if args.key?(:log_type)
        end
      end
      
      # Batch get assets history response.
      class BatchGetAssetsHistoryResponse
        include Google::Apis::Core::Hashable
      
        # A list of assets with valid time windows.
        # Corresponds to the JSON property `assets`
        # @return [Array<Google::Apis::CloudassetV1::TemporalAsset>]
        attr_accessor :assets
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @assets = args[:assets] if args.key?(:assets)
        end
      end
      
      # A BigQuery destination for exporting assets to.
      class BigQueryDestination
        include Google::Apis::Core::Hashable
      
        # Required. The BigQuery dataset in format "projects/projectId/datasets/
        # datasetId", to which the snapshot result should be exported. If this dataset
        # does not exist, the export call returns an INVALID_ARGUMENT error.
        # Corresponds to the JSON property `dataset`
        # @return [String]
        attr_accessor :dataset
      
        # If the destination table already exists and this flag is `TRUE`, the table
        # will be overwritten by the contents of assets snapshot. If the flag is `FALSE`
        # or unset and the destination table already exists, the export call returns an
        # INVALID_ARGUMEMT error.
        # Corresponds to the JSON property `force`
        # @return [Boolean]
        attr_accessor :force
        alias_method :force?, :force
      
        # Specifications of BigQuery partitioned table as export destination.
        # Corresponds to the JSON property `partitionSpec`
        # @return [Google::Apis::CloudassetV1::PartitionSpec]
        attr_accessor :partition_spec
      
        # If this flag is `TRUE`, the snapshot results will be written to one or
        # multiple tables, each of which contains results of one asset type. The [force]
        # and [partition_spec] fields will apply to each of them. Field [table] will be
        # concatenated with "_" and the asset type names (see https://cloud.google.com/
        # asset-inventory/docs/supported-asset-types for supported asset types) to
        # construct per-asset-type table names, in which all non-alphanumeric characters
        # like "." and "/" will be substituted by "_". Example: if field [table] is "
        # mytable" and snapshot results contain "storage.googleapis.com/Bucket" assets,
        # the corresponding table name will be "mytable_storage_googleapis_com_Bucket".
        # If any of these tables does not exist, a new table with the concatenated name
        # will be created. When [content_type] in the ExportAssetsRequest is `RESOURCE`,
        # the schema of each table will include RECORD-type columns mapped to the nested
        # fields in the Asset.resource.data field of that asset type (up to the 15
        # nested level BigQuery supports (https://cloud.google.com/bigquery/docs/nested-
        # repeated#limitations)). The fields in >15 nested levels will be stored in JSON
        # format string as a child column of its parent RECORD column. If error occurs
        # when exporting to any table, the whole export call will return an error but
        # the export results that already succeed will persist. Example: if exporting to
        # table_type_A succeeds when exporting to table_type_B fails during one export
        # call, the results in table_type_A will persist and there will not be partial
        # results persisting in a table.
        # Corresponds to the JSON property `separateTablesPerAssetType`
        # @return [Boolean]
        attr_accessor :separate_tables_per_asset_type
        alias_method :separate_tables_per_asset_type?, :separate_tables_per_asset_type
      
        # Required. The BigQuery table to which the snapshot result should be written.
        # If this table does not exist, a new table with the given name will be created.
        # Corresponds to the JSON property `table`
        # @return [String]
        attr_accessor :table
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @dataset = args[:dataset] if args.key?(:dataset)
          @force = args[:force] if args.key?(:force)
          @partition_spec = args[:partition_spec] if args.key?(:partition_spec)
          @separate_tables_per_asset_type = args[:separate_tables_per_asset_type] if args.key?(:separate_tables_per_asset_type)
          @table = args[:table] if args.key?(:table)
        end
      end
      
      # Associates `members` with a `role`.
      class Binding
        include Google::Apis::Core::Hashable
      
        # Represents a textual expression in the Common Expression Language (CEL) syntax.
        # CEL is a C-like expression language. The syntax and semantics of CEL are
        # documented at https://github.com/google/cel-spec. Example (Comparison): title:
        # "Summary size limit" description: "Determines if a summary is less than 100
        # chars" expression: "document.summary.size() < 100" Example (Equality): title: "
        # Requestor is owner" description: "Determines if requestor is the document
        # owner" expression: "document.owner == request.auth.claims.email" Example (
        # Logic): title: "Public documents" description: "Determine whether the document
        # should be publicly visible" expression: "document.type != 'private' &&
        # document.type != 'internal'" Example (Data Manipulation): title: "Notification
        # string" description: "Create a notification string with a timestamp."
        # expression: "'New message received at ' + string(document.create_time)" The
        # exact variables and functions that may be referenced within an expression are
        # determined by the service that evaluates it. See the service documentation for
        # additional information.
        # Corresponds to the JSON property `condition`
        # @return [Google::Apis::CloudassetV1::Expr]
        attr_accessor :condition
      
        # Specifies the identities requesting access for a Cloud Platform resource. `
        # members` can have the following values: * `allUsers`: A special identifier
        # that represents anyone who is on the internet; with or without a Google
        # account. * `allAuthenticatedUsers`: A special identifier that represents
        # anyone who is authenticated with a Google account or a service account. * `
        # user:`emailid``: An email address that represents a specific Google account.
        # For example, `alice@example.com` . * `serviceAccount:`emailid``: An email
        # address that represents a service account. For example, `my-other-app@appspot.
        # gserviceaccount.com`. * `group:`emailid``: An email address that represents a
        # Google group. For example, `admins@example.com`. * `deleted:user:`emailid`?uid=
        # `uniqueid``: An email address (plus unique identifier) representing a user
        # that has been recently deleted. For example, `alice@example.com?uid=
        # 123456789012345678901`. If the user is recovered, this value reverts to `user:`
        # emailid`` and the recovered user retains the role in the binding. * `deleted:
        # serviceAccount:`emailid`?uid=`uniqueid``: An email address (plus unique
        # identifier) representing a service account that has been recently deleted. For
        # example, `my-other-app@appspot.gserviceaccount.com?uid=123456789012345678901`.
        # If the service account is undeleted, this value reverts to `serviceAccount:`
        # emailid`` and the undeleted service account retains the role in the binding. *
        # `deleted:group:`emailid`?uid=`uniqueid``: An email address (plus unique
        # identifier) representing a Google group that has been recently deleted. For
        # example, `admins@example.com?uid=123456789012345678901`. If the group is
        # recovered, this value reverts to `group:`emailid`` and the recovered group
        # retains the role in the binding. * `domain:`domain``: The G Suite domain (
        # primary) that represents all the users of that domain. For example, `google.
        # com` or `example.com`.
        # Corresponds to the JSON property `members`
        # @return [Array<String>]
        attr_accessor :members
      
        # Role that is assigned to `members`. For example, `roles/viewer`, `roles/editor`
        # , or `roles/owner`.
        # Corresponds to the JSON property `role`
        # @return [String]
        attr_accessor :role
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @condition = args[:condition] if args.key?(:condition)
          @members = args[:members] if args.key?(:members)
          @role = args[:role] if args.key?(:role)
        end
      end
      
      # Create asset feed request.
      class CreateFeedRequest
        include Google::Apis::Core::Hashable
      
        # An asset feed used to export asset updates to a destinations. An asset feed
        # filter controls what updates are exported. The asset feed must be created
        # within a project, organization, or folder. Supported destinations are: Pub/Sub
        # topics.
        # Corresponds to the JSON property `feed`
        # @return [Google::Apis::CloudassetV1::Feed]
        attr_accessor :feed
      
        # Required. This is the client-assigned asset feed identifier and it needs to be
        # unique under a specific parent project/folder/organization.
        # Corresponds to the JSON property `feedId`
        # @return [String]
        attr_accessor :feed_id
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @feed = args[:feed] if args.key?(:feed)
          @feed_id = args[:feed_id] if args.key?(:feed_id)
        end
      end
      
      # A generic empty message that you can re-use to avoid defining duplicated empty
      # messages in your APIs. A typical example is to use it as the request or the
      # response type of an API method. For instance: service Foo ` rpc Bar(google.
      # protobuf.Empty) returns (google.protobuf.Empty); ` The JSON representation for
      # `Empty` is empty JSON object ````.
      class Empty
        include Google::Apis::Core::Hashable
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
        end
      end
      
      # Explanation about the IAM policy search result.
      class Explanation
        include Google::Apis::Core::Hashable
      
        # The map from roles to their included permissions that match the permission
        # query (i.e., a query containing `policy.role.permissions:`). Example: if query
        # `policy.role.permissions:compute.disk.get` matches a policy binding that
        # contains owner role, the matched_permissions will be ``"roles/owner": ["
        # compute.disk.get"]``. The roles can also be found in the returned `policy`
        # bindings. Note that the map is populated only for requests with permission
        # queries.
        # Corresponds to the JSON property `matchedPermissions`
        # @return [Hash<String,Google::Apis::CloudassetV1::Permissions>]
        attr_accessor :matched_permissions
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @matched_permissions = args[:matched_permissions] if args.key?(:matched_permissions)
        end
      end
      
      # Export asset request.
      class ExportAssetsRequest
        include Google::Apis::Core::Hashable
      
        # A list of asset types to take a snapshot for. For example: "compute.googleapis.
        # com/Disk". Regular expressions are also supported. For example: * "compute.
        # googleapis.com.*" snapshots resources whose asset type starts with "compute.
        # googleapis.com". * ".*Instance" snapshots resources whose asset type ends with
        # "Instance". * ".*Instance.*" snapshots resources whose asset type contains "
        # Instance". See [RE2](https://github.com/google/re2/wiki/Syntax) for all
        # supported regular expression syntax. If the regular expression does not match
        # any supported asset type, an INVALID_ARGUMENT error will be returned. If
        # specified, only matching assets will be returned, otherwise, it will snapshot
        # all asset types. See [Introduction to Cloud Asset Inventory](https://cloud.
        # google.com/asset-inventory/docs/overview) for all supported asset types.
        # Corresponds to the JSON property `assetTypes`
        # @return [Array<String>]
        attr_accessor :asset_types
      
        # Asset content type. If not specified, no content but the asset name will be
        # returned.
        # Corresponds to the JSON property `contentType`
        # @return [String]
        attr_accessor :content_type
      
        # Output configuration for export assets destination.
        # Corresponds to the JSON property `outputConfig`
        # @return [Google::Apis::CloudassetV1::OutputConfig]
        attr_accessor :output_config
      
        # Timestamp to take an asset snapshot. This can only be set to a timestamp
        # between the current time and the current time minus 35 days (inclusive). If
        # not specified, the current time will be used. Due to delays in resource data
        # collection and indexing, there is a volatile window during which running the
        # same query may get different results.
        # Corresponds to the JSON property `readTime`
        # @return [String]
        attr_accessor :read_time
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @asset_types = args[:asset_types] if args.key?(:asset_types)
          @content_type = args[:content_type] if args.key?(:content_type)
          @output_config = args[:output_config] if args.key?(:output_config)
          @read_time = args[:read_time] if args.key?(:read_time)
        end
      end
      
      # Represents a textual expression in the Common Expression Language (CEL) syntax.
      # CEL is a C-like expression language. The syntax and semantics of CEL are
      # documented at https://github.com/google/cel-spec. Example (Comparison): title:
      # "Summary size limit" description: "Determines if a summary is less than 100
      # chars" expression: "document.summary.size() < 100" Example (Equality): title: "
      # Requestor is owner" description: "Determines if requestor is the document
      # owner" expression: "document.owner == request.auth.claims.email" Example (
      # Logic): title: "Public documents" description: "Determine whether the document
      # should be publicly visible" expression: "document.type != 'private' &&
      # document.type != 'internal'" Example (Data Manipulation): title: "Notification
      # string" description: "Create a notification string with a timestamp."
      # expression: "'New message received at ' + string(document.create_time)" The
      # exact variables and functions that may be referenced within an expression are
      # determined by the service that evaluates it. See the service documentation for
      # additional information.
      class Expr
        include Google::Apis::Core::Hashable
      
        # Optional. Description of the expression. This is a longer text which describes
        # the expression, e.g. when hovered over it in a UI.
        # Corresponds to the JSON property `description`
        # @return [String]
        attr_accessor :description
      
        # Textual representation of an expression in Common Expression Language syntax.
        # Corresponds to the JSON property `expression`
        # @return [String]
        attr_accessor :expression
      
        # Optional. String indicating the location of the expression for error reporting,
        # e.g. a file name and a position in the file.
        # Corresponds to the JSON property `location`
        # @return [String]
        attr_accessor :location
      
        # Optional. Title for the expression, i.e. a short string describing its purpose.
        # This can be used e.g. in UIs which allow to enter the expression.
        # Corresponds to the JSON property `title`
        # @return [String]
        attr_accessor :title
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @description = args[:description] if args.key?(:description)
          @expression = args[:expression] if args.key?(:expression)
          @location = args[:location] if args.key?(:location)
          @title = args[:title] if args.key?(:title)
        end
      end
      
      # An asset feed used to export asset updates to a destinations. An asset feed
      # filter controls what updates are exported. The asset feed must be created
      # within a project, organization, or folder. Supported destinations are: Pub/Sub
      # topics.
      class Feed
        include Google::Apis::Core::Hashable
      
        # A list of the full names of the assets to receive updates. You must specify
        # either or both of asset_names and asset_types. Only asset updates matching
        # specified asset_names or asset_types are exported to the feed. Example: `//
        # compute.googleapis.com/projects/my_project_123/zones/zone1/instances/instance1`
        # . See [Resource Names](https://cloud.google.com/apis/design/resource_names#
        # full_resource_name) for more info.
        # Corresponds to the JSON property `assetNames`
        # @return [Array<String>]
        attr_accessor :asset_names
      
        # A list of types of the assets to receive updates. You must specify either or
        # both of asset_names and asset_types. Only asset updates matching specified
        # asset_names or asset_types are exported to the feed. Example: `"compute.
        # googleapis.com/Disk"` See [this topic](https://cloud.google.com/asset-
        # inventory/docs/supported-asset-types) for a list of all supported asset types.
        # Corresponds to the JSON property `assetTypes`
        # @return [Array<String>]
        attr_accessor :asset_types
      
        # Represents a textual expression in the Common Expression Language (CEL) syntax.
        # CEL is a C-like expression language. The syntax and semantics of CEL are
        # documented at https://github.com/google/cel-spec. Example (Comparison): title:
        # "Summary size limit" description: "Determines if a summary is less than 100
        # chars" expression: "document.summary.size() < 100" Example (Equality): title: "
        # Requestor is owner" description: "Determines if requestor is the document
        # owner" expression: "document.owner == request.auth.claims.email" Example (
        # Logic): title: "Public documents" description: "Determine whether the document
        # should be publicly visible" expression: "document.type != 'private' &&
        # document.type != 'internal'" Example (Data Manipulation): title: "Notification
        # string" description: "Create a notification string with a timestamp."
        # expression: "'New message received at ' + string(document.create_time)" The
        # exact variables and functions that may be referenced within an expression are
        # determined by the service that evaluates it. See the service documentation for
        # additional information.
        # Corresponds to the JSON property `condition`
        # @return [Google::Apis::CloudassetV1::Expr]
        attr_accessor :condition
      
        # Asset content type. If not specified, no content but the asset name and type
        # will be returned.
        # Corresponds to the JSON property `contentType`
        # @return [String]
        attr_accessor :content_type
      
        # Output configuration for asset feed destination.
        # Corresponds to the JSON property `feedOutputConfig`
        # @return [Google::Apis::CloudassetV1::FeedOutputConfig]
        attr_accessor :feed_output_config
      
        # Required. The format will be projects/`project_number`/feeds/`client-
        # assigned_feed_identifier` or folders/`folder_number`/feeds/`client-
        # assigned_feed_identifier` or organizations/`organization_number`/feeds/`client-
        # assigned_feed_identifier` The client-assigned feed identifier must be unique
        # within the parent project/folder/organization.
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @asset_names = args[:asset_names] if args.key?(:asset_names)
          @asset_types = args[:asset_types] if args.key?(:asset_types)
          @condition = args[:condition] if args.key?(:condition)
          @content_type = args[:content_type] if args.key?(:content_type)
          @feed_output_config = args[:feed_output_config] if args.key?(:feed_output_config)
          @name = args[:name] if args.key?(:name)
        end
      end
      
      # Output configuration for asset feed destination.
      class FeedOutputConfig
        include Google::Apis::Core::Hashable
      
        # A Pub/Sub destination.
        # Corresponds to the JSON property `pubsubDestination`
        # @return [Google::Apis::CloudassetV1::PubsubDestination]
        attr_accessor :pubsub_destination
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @pubsub_destination = args[:pubsub_destination] if args.key?(:pubsub_destination)
        end
      end
      
      # A Cloud Storage location.
      class GcsDestination
        include Google::Apis::Core::Hashable
      
        # The uri of the Cloud Storage object. It's the same uri that is used by gsutil.
        # Example: "gs://bucket_name/object_name". See [Viewing and Editing Object
        # Metadata](https://cloud.google.com/storage/docs/viewing-editing-metadata) for
        # more information.
        # Corresponds to the JSON property `uri`
        # @return [String]
        attr_accessor :uri
      
        # The uri prefix of all generated Cloud Storage objects. Example: "gs://
        # bucket_name/object_name_prefix". Each object uri is in format: "gs://
        # bucket_name/object_name_prefix// and only contains assets for that type.
        # starts from 0. Example: "gs://bucket_name/object_name_prefix/compute.
        # googleapis.com/Disk/0" is the first shard of output objects containing all
        # compute.googleapis.com/Disk assets. An INVALID_ARGUMENT error will be returned
        # if file with the same name "gs://bucket_name/object_name_prefix" already
        # exists.
        # Corresponds to the JSON property `uriPrefix`
        # @return [String]
        attr_accessor :uri_prefix
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @uri = args[:uri] if args.key?(:uri)
          @uri_prefix = args[:uri_prefix] if args.key?(:uri_prefix)
        end
      end
      
      # An IAM role or permission under analysis.
      class GoogleCloudAssetV1Access
        include Google::Apis::Core::Hashable
      
        # Represents the detailed state of an entity under analysis, such as a resource,
        # an identity or an access.
        # Corresponds to the JSON property `analysisState`
        # @return [Google::Apis::CloudassetV1::IamPolicyAnalysisState]
        attr_accessor :analysis_state
      
        # The permission.
        # Corresponds to the JSON property `permission`
        # @return [String]
        attr_accessor :permission
      
        # The role.
        # Corresponds to the JSON property `role`
        # @return [String]
        attr_accessor :role
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @analysis_state = args[:analysis_state] if args.key?(:analysis_state)
          @permission = args[:permission] if args.key?(:permission)
          @role = args[:role] if args.key?(:role)
        end
      end
      
      # An access control list, derived from the above IAM policy binding, which
      # contains a set of resources and accesses. May include one item from each set
      # to compose an access control entry. NOTICE that there could be multiple access
      # control lists for one IAM policy binding. The access control lists are created
      # based on resource and access combinations. For example, assume we have the
      # following cases in one IAM policy binding: - Permission P1 and P2 apply to
      # resource R1 and R2; - Permission P3 applies to resource R2 and R3; This will
      # result in the following access control lists: - AccessControlList 1: [R1, R2],
      # [P1, P2] - AccessControlList 2: [R2, R3], [P3]
      class GoogleCloudAssetV1AccessControlList
        include Google::Apis::Core::Hashable
      
        # The accesses that match one of the following conditions: - The access_selector,
        # if it is specified in request; - Otherwise, access specifiers reachable from
        # the policy binding's role.
        # Corresponds to the JSON property `accesses`
        # @return [Array<Google::Apis::CloudassetV1::GoogleCloudAssetV1Access>]
        attr_accessor :accesses
      
        # Resource edges of the graph starting from the policy attached resource to any
        # descendant resources. The Edge.source_node contains the full resource name of
        # a parent resource and Edge.target_node contains the full resource name of a
        # child resource. This field is present only if the output_resource_edges option
        # is enabled in request.
        # Corresponds to the JSON property `resourceEdges`
        # @return [Array<Google::Apis::CloudassetV1::GoogleCloudAssetV1Edge>]
        attr_accessor :resource_edges
      
        # The resources that match one of the following conditions: - The
        # resource_selector, if it is specified in request; - Otherwise, resources
        # reachable from the policy attached resource.
        # Corresponds to the JSON property `resources`
        # @return [Array<Google::Apis::CloudassetV1::GoogleCloudAssetV1Resource>]
        attr_accessor :resources
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @accesses = args[:accesses] if args.key?(:accesses)
          @resource_edges = args[:resource_edges] if args.key?(:resource_edges)
          @resources = args[:resources] if args.key?(:resources)
        end
      end
      
      # A BigQuery destination.
      class GoogleCloudAssetV1BigQueryDestination
        include Google::Apis::Core::Hashable
      
        # Required. The BigQuery dataset in format "projects/projectId/datasets/
        # datasetId", to which the analysis results should be exported. If this dataset
        # does not exist, the export call will return an INVALID_ARGUMENT error.
        # Corresponds to the JSON property `dataset`
        # @return [String]
        attr_accessor :dataset
      
        # The partition key for BigQuery partitioned table.
        # Corresponds to the JSON property `partitionKey`
        # @return [String]
        attr_accessor :partition_key
      
        # Required. The prefix of the BigQuery tables to which the analysis results will
        # be written. Tables will be created based on this table_prefix if not exist: *
        # _analysis table will contain export operation's metadata. * _analysis_result
        # will contain all the IamPolicyAnalysisResult. When [partition_key] is
        # specified, both tables will be partitioned based on the [partition_key].
        # Corresponds to the JSON property `tablePrefix`
        # @return [String]
        attr_accessor :table_prefix
      
        # Optional. Specifies the action that occurs if the destination table or
        # partition already exists. The following values are supported: * WRITE_TRUNCATE:
        # If the table or partition already exists, BigQuery overwrites the entire
        # table or all the partitions data. * WRITE_APPEND: If the table or partition
        # already exists, BigQuery appends the data to the table or the latest partition.
        # * WRITE_EMPTY: If the table already exists and contains data, an error is
        # returned. The default value is WRITE_APPEND. Each action is atomic and only
        # occurs if BigQuery is able to complete the job successfully. Details are at
        # https://cloud.google.com/bigquery/docs/loading-data-local#
        # appending_to_or_overwriting_a_table_using_a_local_file.
        # Corresponds to the JSON property `writeDisposition`
        # @return [String]
        attr_accessor :write_disposition
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @dataset = args[:dataset] if args.key?(:dataset)
          @partition_key = args[:partition_key] if args.key?(:partition_key)
          @table_prefix = args[:table_prefix] if args.key?(:table_prefix)
          @write_disposition = args[:write_disposition] if args.key?(:write_disposition)
        end
      end
      
      # A directional edge.
      class GoogleCloudAssetV1Edge
        include Google::Apis::Core::Hashable
      
        # The source node of the edge. For example, it could be a full resource name for
        # a resource node or an email of an identity.
        # Corresponds to the JSON property `sourceNode`
        # @return [String]
        attr_accessor :source_node
      
        # The target node of the edge. For example, it could be a full resource name for
        # a resource node or an email of an identity.
        # Corresponds to the JSON property `targetNode`
        # @return [String]
        attr_accessor :target_node
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @source_node = args[:source_node] if args.key?(:source_node)
          @target_node = args[:target_node] if args.key?(:target_node)
        end
      end
      
      # A Cloud Storage location.
      class GoogleCloudAssetV1GcsDestination
        include Google::Apis::Core::Hashable
      
        # Required. The uri of the Cloud Storage object. It's the same uri that is used
        # by gsutil. For example: "gs://bucket_name/object_name". See [Quickstart: Using
        # the gsutil tool] (https://cloud.google.com/storage/docs/quickstart-gsutil) for
        # examples.
        # Corresponds to the JSON property `uri`
        # @return [String]
        attr_accessor :uri
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @uri = args[:uri] if args.key?(:uri)
        end
      end
      
      # An identity under analysis.
      class GoogleCloudAssetV1Identity
        include Google::Apis::Core::Hashable
      
        # Represents the detailed state of an entity under analysis, such as a resource,
        # an identity or an access.
        # Corresponds to the JSON property `analysisState`
        # @return [Google::Apis::CloudassetV1::IamPolicyAnalysisState]
        attr_accessor :analysis_state
      
        # The identity name in any form of members appear in [IAM policy binding](https:/
        # /cloud.google.com/iam/reference/rest/v1/Binding), such as: - user:foo@google.
        # com - group:group1@google.com - serviceAccount:s1@prj1.iam.gserviceaccount.com
        # - projectOwner:some_project_id - domain:google.com - allUsers - etc.
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @analysis_state = args[:analysis_state] if args.key?(:analysis_state)
          @name = args[:name] if args.key?(:name)
        end
      end
      
      # The identities and group edges.
      class GoogleCloudAssetV1IdentityList
        include Google::Apis::Core::Hashable
      
        # Group identity edges of the graph starting from the binding's group members to
        # any node of the identities. The Edge.source_node contains a group, such as `
        # group:parent@google.com`. The Edge.target_node contains a member of the group,
        # such as `group:child@google.com` or `user:foo@google.com`. This field is
        # present only if the output_group_edges option is enabled in request.
        # Corresponds to the JSON property `groupEdges`
        # @return [Array<Google::Apis::CloudassetV1::GoogleCloudAssetV1Edge>]
        attr_accessor :group_edges
      
        # Only the identities that match one of the following conditions will be
        # presented: - The identity_selector, if it is specified in request; - Otherwise,
        # identities reachable from the policy binding's members.
        # Corresponds to the JSON property `identities`
        # @return [Array<Google::Apis::CloudassetV1::GoogleCloudAssetV1Identity>]
        attr_accessor :identities
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @group_edges = args[:group_edges] if args.key?(:group_edges)
          @identities = args[:identities] if args.key?(:identities)
        end
      end
      
      # A Google Cloud resource under analysis.
      class GoogleCloudAssetV1Resource
        include Google::Apis::Core::Hashable
      
        # Represents the detailed state of an entity under analysis, such as a resource,
        # an identity or an access.
        # Corresponds to the JSON property `analysisState`
        # @return [Google::Apis::CloudassetV1::IamPolicyAnalysisState]
        attr_accessor :analysis_state
      
        # The [full resource name](https://cloud.google.com/asset-inventory/docs/
        # resource-name-format)
        # Corresponds to the JSON property `fullResourceName`
        # @return [String]
        attr_accessor :full_resource_name
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @analysis_state = args[:analysis_state] if args.key?(:analysis_state)
          @full_resource_name = args[:full_resource_name] if args.key?(:full_resource_name)
        end
      end
      
      # Used in `policy_type` to specify how `boolean_policy` will behave at this
      # resource.
      class GoogleCloudOrgpolicyV1BooleanPolicy
        include Google::Apis::Core::Hashable
      
        # If `true`, then the `Policy` is enforced. If `false`, then any configuration
        # is acceptable. Suppose you have a `Constraint` `constraints/compute.
        # disableSerialPortAccess` with `constraint_default` set to `ALLOW`. A `Policy`
        # for that `Constraint` exhibits the following behavior: - If the `Policy` at
        # this resource has enforced set to `false`, serial port connection attempts
        # will be allowed. - If the `Policy` at this resource has enforced set to `true`,
        # serial port connection attempts will be refused. - If the `Policy` at this
        # resource is `RestoreDefault`, serial port connection attempts will be allowed.
        # - If no `Policy` is set at this resource or anywhere higher in the resource
        # hierarchy, serial port connection attempts will be allowed. - If no `Policy`
        # is set at this resource, but one exists higher in the resource hierarchy, the
        # behavior is as if the`Policy` were set at this resource. The following
        # examples demonstrate the different possible layerings: Example 1 (nearest `
        # Constraint` wins): `organizations/foo` has a `Policy` with: `enforced: false` `
        # projects/bar` has no `Policy` set. The constraint at `projects/bar` and `
        # organizations/foo` will not be enforced. Example 2 (enforcement gets replaced):
        # `organizations/foo` has a `Policy` with: `enforced: false` `projects/bar` has
        # a `Policy` with: `enforced: true` The constraint at `organizations/foo` is not
        # enforced. The constraint at `projects/bar` is enforced. Example 3 (
        # RestoreDefault): `organizations/foo` has a `Policy` with: `enforced: true` `
        # projects/bar` has a `Policy` with: `RestoreDefault: ``` The constraint at `
        # organizations/foo` is enforced. The constraint at `projects/bar` is not
        # enforced, because `constraint_default` for the `Constraint` is `ALLOW`.
        # Corresponds to the JSON property `enforced`
        # @return [Boolean]
        attr_accessor :enforced
        alias_method :enforced?, :enforced
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @enforced = args[:enforced] if args.key?(:enforced)
        end
      end
      
      # Used in `policy_type` to specify how `list_policy` behaves at this resource. `
      # ListPolicy` can define specific values and subtrees of Cloud Resource Manager
      # resource hierarchy (`Organizations`, `Folders`, `Projects`) that are allowed
      # or denied by setting the `allowed_values` and `denied_values` fields. This is
      # achieved by using the `under:` and optional `is:` prefixes. The `under:`
      # prefix is used to denote resource subtree values. The `is:` prefix is used to
      # denote specific values, and is required only if the value contains a ":".
      # Values prefixed with "is:" are treated the same as values with no prefix.
      # Ancestry subtrees must be in one of the following formats: - "projects/", e.g.
      # "projects/tokyo-rain-123" - "folders/", e.g. "folders/1234" - "organizations/",
      # e.g. "organizations/1234" The `supports_under` field of the associated `
      # Constraint` defines whether ancestry prefixes can be used. You can set `
      # allowed_values` and `denied_values` in the same `Policy` if `all_values` is `
      # ALL_VALUES_UNSPECIFIED`. `ALLOW` or `DENY` are used to allow or deny all
      # values. If `all_values` is set to either `ALLOW` or `DENY`, `allowed_values`
      # and `denied_values` must be unset.
      class GoogleCloudOrgpolicyV1ListPolicy
        include Google::Apis::Core::Hashable
      
        # The policy all_values state.
        # Corresponds to the JSON property `allValues`
        # @return [String]
        attr_accessor :all_values
      
        # List of values allowed at this resource. Can only be set if `all_values` is
        # set to `ALL_VALUES_UNSPECIFIED`.
        # Corresponds to the JSON property `allowedValues`
        # @return [Array<String>]
        attr_accessor :allowed_values
      
        # List of values denied at this resource. Can only be set if `all_values` is set
        # to `ALL_VALUES_UNSPECIFIED`.
        # Corresponds to the JSON property `deniedValues`
        # @return [Array<String>]
        attr_accessor :denied_values
      
        # Determines the inheritance behavior for this `Policy`. By default, a `
        # ListPolicy` set at a resource supersedes any `Policy` set anywhere up the
        # resource hierarchy. However, if `inherit_from_parent` is set to `true`, then
        # the values from the effective `Policy` of the parent resource are inherited,
        # meaning the values set in this `Policy` are added to the values inherited up
        # the hierarchy. Setting `Policy` hierarchies that inherit both allowed values
        # and denied values isn't recommended in most circumstances to keep the
        # configuration simple and understandable. However, it is possible to set a `
        # Policy` with `allowed_values` set that inherits a `Policy` with `denied_values`
        # set. In this case, the values that are allowed must be in `allowed_values`
        # and not present in `denied_values`. For example, suppose you have a `
        # Constraint` `constraints/serviceuser.services`, which has a `constraint_type`
        # of `list_constraint`, and with `constraint_default` set to `ALLOW`. Suppose
        # that at the Organization level, a `Policy` is applied that restricts the
        # allowed API activations to ``E1`, `E2``. Then, if a `Policy` is applied to a
        # project below the Organization that has `inherit_from_parent` set to `false`
        # and field all_values set to DENY, then an attempt to activate any API will be
        # denied. The following examples demonstrate different possible layerings for `
        # projects/bar` parented by `organizations/foo`: Example 1 (no inherited values):
        # `organizations/foo` has a `Policy` with values: `allowed_values: "E1"
        # allowed_values:"E2"` `projects/bar` has `inherit_from_parent` `false` and
        # values: `allowed_values: "E3" allowed_values: "E4"` The accepted values at `
        # organizations/foo` are `E1`, `E2`. The accepted values at `projects/bar` are `
        # E3`, and `E4`. Example 2 (inherited values): `organizations/foo` has a `Policy`
        # with values: `allowed_values: "E1" allowed_values:"E2"` `projects/bar` has a `
        # Policy` with values: `value: "E3" value: "E4" inherit_from_parent: true` The
        # accepted values at `organizations/foo` are `E1`, `E2`. The accepted values at `
        # projects/bar` are `E1`, `E2`, `E3`, and `E4`. Example 3 (inheriting both
        # allowed and denied values): `organizations/foo` has a `Policy` with values: `
        # allowed_values: "E1" allowed_values: "E2"` `projects/bar` has a `Policy` with:
        # `denied_values: "E1"` The accepted values at `organizations/foo` are `E1`, `E2`
        # . The value accepted at `projects/bar` is `E2`. Example 4 (RestoreDefault): `
        # organizations/foo` has a `Policy` with values: `allowed_values: "E1"
        # allowed_values:"E2"` `projects/bar` has a `Policy` with values: `
        # RestoreDefault: ``` The accepted values at `organizations/foo` are `E1`, `E2`.
        # The accepted values at `projects/bar` are either all or none depending on the
        # value of `constraint_default` (if `ALLOW`, all; if `DENY`, none). Example 5 (
        # no policy inherits parent policy): `organizations/foo` has no `Policy` set. `
        # projects/bar` has no `Policy` set. The accepted values at both levels are
        # either all or none depending on the value of `constraint_default` (if `ALLOW`,
        # all; if `DENY`, none). Example 6 (ListConstraint allowing all): `organizations/
        # foo` has a `Policy` with values: `allowed_values: "E1" allowed_values: "E2"` `
        # projects/bar` has a `Policy` with: `all: ALLOW` The accepted values at `
        # organizations/foo` are `E1`, E2`. Any value is accepted at `projects/bar`.
        # Example 7 (ListConstraint allowing none): `organizations/foo` has a `Policy`
        # with values: `allowed_values: "E1" allowed_values: "E2"` `projects/bar` has a `
        # Policy` with: `all: DENY` The accepted values at `organizations/foo` are `E1`,
        # E2`. No value is accepted at `projects/bar`. Example 10 (allowed and denied
        # subtrees of Resource Manager hierarchy): Given the following resource
        # hierarchy O1->`F1, F2`; F1->`P1`; F2->`P2, P3`, `organizations/foo` has a `
        # Policy` with values: `allowed_values: "under:organizations/O1"` `projects/bar`
        # has a `Policy` with: `allowed_values: "under:projects/P3"` `denied_values: "
        # under:folders/F2"` The accepted values at `organizations/foo` are `
        # organizations/O1`, `folders/F1`, `folders/F2`, `projects/P1`, `projects/P2`, `
        # projects/P3`. The accepted values at `projects/bar` are `organizations/O1`, `
        # folders/F1`, `projects/P1`.
        # Corresponds to the JSON property `inheritFromParent`
        # @return [Boolean]
        attr_accessor :inherit_from_parent
        alias_method :inherit_from_parent?, :inherit_from_parent
      
        # Optional. The Google Cloud Console will try to default to a configuration that
        # matches the value specified in this `Policy`. If `suggested_value` is not set,
        # it will inherit the value specified higher in the hierarchy, unless `
        # inherit_from_parent` is `false`.
        # Corresponds to the JSON property `suggestedValue`
        # @return [String]
        attr_accessor :suggested_value
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @all_values = args[:all_values] if args.key?(:all_values)
          @allowed_values = args[:allowed_values] if args.key?(:allowed_values)
          @denied_values = args[:denied_values] if args.key?(:denied_values)
          @inherit_from_parent = args[:inherit_from_parent] if args.key?(:inherit_from_parent)
          @suggested_value = args[:suggested_value] if args.key?(:suggested_value)
        end
      end
      
      # Defines a Cloud Organization `Policy` which is used to specify `Constraints`
      # for configurations of Cloud Platform resources.
      class GoogleCloudOrgpolicyV1Policy
        include Google::Apis::Core::Hashable
      
        # Used in `policy_type` to specify how `boolean_policy` will behave at this
        # resource.
        # Corresponds to the JSON property `booleanPolicy`
        # @return [Google::Apis::CloudassetV1::GoogleCloudOrgpolicyV1BooleanPolicy]
        attr_accessor :boolean_policy
      
        # The name of the `Constraint` the `Policy` is configuring, for example, `
        # constraints/serviceuser.services`. A [list of available constraints](/resource-
        # manager/docs/organization-policy/org-policy-constraints) is available.
        # Immutable after creation.
        # Corresponds to the JSON property `constraint`
        # @return [String]
        attr_accessor :constraint
      
        # An opaque tag indicating the current version of the `Policy`, used for
        # concurrency control. When the `Policy` is returned from either a `GetPolicy`
        # or a `ListOrgPolicy` request, this `etag` indicates the version of the current
        # `Policy` to use when executing a read-modify-write loop. When the `Policy` is
        # returned from a `GetEffectivePolicy` request, the `etag` will be unset. When
        # the `Policy` is used in a `SetOrgPolicy` method, use the `etag` value that was
        # returned from a `GetOrgPolicy` request as part of a read-modify-write loop for
        # concurrency control. Not setting the `etag`in a `SetOrgPolicy` request will
        # result in an unconditional write of the `Policy`.
        # Corresponds to the JSON property `etag`
        # NOTE: Values are automatically base64 encoded/decoded in the client library.
        # @return [String]
        attr_accessor :etag
      
        # Used in `policy_type` to specify how `list_policy` behaves at this resource. `
        # ListPolicy` can define specific values and subtrees of Cloud Resource Manager
        # resource hierarchy (`Organizations`, `Folders`, `Projects`) that are allowed
        # or denied by setting the `allowed_values` and `denied_values` fields. This is
        # achieved by using the `under:` and optional `is:` prefixes. The `under:`
        # prefix is used to denote resource subtree values. The `is:` prefix is used to
        # denote specific values, and is required only if the value contains a ":".
        # Values prefixed with "is:" are treated the same as values with no prefix.
        # Ancestry subtrees must be in one of the following formats: - "projects/", e.g.
        # "projects/tokyo-rain-123" - "folders/", e.g. "folders/1234" - "organizations/",
        # e.g. "organizations/1234" The `supports_under` field of the associated `
        # Constraint` defines whether ancestry prefixes can be used. You can set `
        # allowed_values` and `denied_values` in the same `Policy` if `all_values` is `
        # ALL_VALUES_UNSPECIFIED`. `ALLOW` or `DENY` are used to allow or deny all
        # values. If `all_values` is set to either `ALLOW` or `DENY`, `allowed_values`
        # and `denied_values` must be unset.
        # Corresponds to the JSON property `listPolicy`
        # @return [Google::Apis::CloudassetV1::GoogleCloudOrgpolicyV1ListPolicy]
        attr_accessor :list_policy
      
        # Ignores policies set above this resource and restores the `constraint_default`
        # enforcement behavior of the specific `Constraint` at this resource. Suppose
        # that `constraint_default` is set to `ALLOW` for the `Constraint` `constraints/
        # serviceuser.services`. Suppose that organization foo.com sets a `Policy` at
        # their Organization resource node that restricts the allowed service
        # activations to deny all service activations. They could then set a `Policy`
        # with the `policy_type` `restore_default` on several experimental projects,
        # restoring the `constraint_default` enforcement of the `Constraint` for only
        # those projects, allowing those projects to have all services activated.
        # Corresponds to the JSON property `restoreDefault`
        # @return [Google::Apis::CloudassetV1::GoogleCloudOrgpolicyV1RestoreDefault]
        attr_accessor :restore_default
      
        # The time stamp the `Policy` was previously updated. This is set by the server,
        # not specified by the caller, and represents the last time a call to `
        # SetOrgPolicy` was made for that `Policy`. Any value set by the client will be
        # ignored.
        # Corresponds to the JSON property `updateTime`
        # @return [String]
        attr_accessor :update_time
      
        # Version of the `Policy`. Default version is 0;
        # Corresponds to the JSON property `version`
        # @return [Fixnum]
        attr_accessor :version
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @boolean_policy = args[:boolean_policy] if args.key?(:boolean_policy)
          @constraint = args[:constraint] if args.key?(:constraint)
          @etag = args[:etag] if args.key?(:etag)
          @list_policy = args[:list_policy] if args.key?(:list_policy)
          @restore_default = args[:restore_default] if args.key?(:restore_default)
          @update_time = args[:update_time] if args.key?(:update_time)
          @version = args[:version] if args.key?(:version)
        end
      end
      
      # Ignores policies set above this resource and restores the `constraint_default`
      # enforcement behavior of the specific `Constraint` at this resource. Suppose
      # that `constraint_default` is set to `ALLOW` for the `Constraint` `constraints/
      # serviceuser.services`. Suppose that organization foo.com sets a `Policy` at
      # their Organization resource node that restricts the allowed service
      # activations to deny all service activations. They could then set a `Policy`
      # with the `policy_type` `restore_default` on several experimental projects,
      # restoring the `constraint_default` enforcement of the `Constraint` for only
      # those projects, allowing those projects to have all services activated.
      class GoogleCloudOrgpolicyV1RestoreDefault
        include Google::Apis::Core::Hashable
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
        end
      end
      
      # An `AccessLevel` is a label that can be applied to requests to Google Cloud
      # services, along with a list of requirements necessary for the label to be
      # applied.
      class GoogleIdentityAccesscontextmanagerV1AccessLevel
        include Google::Apis::Core::Hashable
      
        # `BasicLevel` is an `AccessLevel` using a set of recommended features.
        # Corresponds to the JSON property `basic`
        # @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1BasicLevel]
        attr_accessor :basic
      
        # `CustomLevel` is an `AccessLevel` using the Cloud Common Expression Language
        # to represent the necessary conditions for the level to apply to a request. See
        # CEL spec at: https://github.com/google/cel-spec
        # Corresponds to the JSON property `custom`
        # @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1CustomLevel]
        attr_accessor :custom
      
        # Description of the `AccessLevel` and its use. Does not affect behavior.
        # Corresponds to the JSON property `description`
        # @return [String]
        attr_accessor :description
      
        # Required. Resource name for the Access Level. The `short_name` component must
        # begin with a letter and only include alphanumeric and '_'. Format: `
        # accessPolicies/`policy_id`/accessLevels/`short_name``. The maximum length of
        # the `short_name` component is 50 characters.
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # Human readable title. Must be unique within the Policy.
        # Corresponds to the JSON property `title`
        # @return [String]
        attr_accessor :title
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @basic = args[:basic] if args.key?(:basic)
          @custom = args[:custom] if args.key?(:custom)
          @description = args[:description] if args.key?(:description)
          @name = args[:name] if args.key?(:name)
          @title = args[:title] if args.key?(:title)
        end
      end
      
      # `AccessPolicy` is a container for `AccessLevels` (which define the necessary
      # attributes to use Google Cloud services) and `ServicePerimeters` (which define
      # regions of services able to freely pass data within a perimeter). An access
      # policy is globally visible within an organization, and the restrictions it
      # specifies apply to all projects within an organization.
      class GoogleIdentityAccesscontextmanagerV1AccessPolicy
        include Google::Apis::Core::Hashable
      
        # Output only. An opaque identifier for the current version of the `AccessPolicy`
        # . This will always be a strongly validated etag, meaning that two Access
        # Polices will be identical if and only if their etags are identical. Clients
        # should not expect this to be in any specific format.
        # Corresponds to the JSON property `etag`
        # @return [String]
        attr_accessor :etag
      
        # Output only. Resource name of the `AccessPolicy`. Format: `accessPolicies/`
        # policy_id``
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # Required. The parent of this `AccessPolicy` in the Cloud Resource Hierarchy.
        # Currently immutable once created. Format: `organizations/`organization_id``
        # Corresponds to the JSON property `parent`
        # @return [String]
        attr_accessor :parent
      
        # Required. Human readable title. Does not affect behavior.
        # Corresponds to the JSON property `title`
        # @return [String]
        attr_accessor :title
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @etag = args[:etag] if args.key?(:etag)
          @name = args[:name] if args.key?(:name)
          @parent = args[:parent] if args.key?(:parent)
          @title = args[:title] if args.key?(:title)
        end
      end
      
      # Identification for an API Operation.
      class GoogleIdentityAccesscontextmanagerV1ApiOperation
        include Google::Apis::Core::Hashable
      
        # API methods or permissions to allow. Method or permission must belong to the
        # service specified by `service_name` field. A single MethodSelector entry with `
        # *` specified for the `method` field will allow all methods AND permissions for
        # the service specified in `service_name`.
        # Corresponds to the JSON property `methodSelectors`
        # @return [Array<Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1MethodSelector>]
        attr_accessor :method_selectors
      
        # The name of the API whose methods or permissions the IngressPolicy or
        # EgressPolicy want to allow. A single ApiOperation with `service_name` field
        # set to `*` will allow all methods AND permissions for all services.
        # Corresponds to the JSON property `serviceName`
        # @return [String]
        attr_accessor :service_name
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @method_selectors = args[:method_selectors] if args.key?(:method_selectors)
          @service_name = args[:service_name] if args.key?(:service_name)
        end
      end
      
      # `BasicLevel` is an `AccessLevel` using a set of recommended features.
      class GoogleIdentityAccesscontextmanagerV1BasicLevel
        include Google::Apis::Core::Hashable
      
        # How the `conditions` list should be combined to determine if a request is
        # granted this `AccessLevel`. If AND is used, each `Condition` in `conditions`
        # must be satisfied for the `AccessLevel` to be applied. If OR is used, at least
        # one `Condition` in `conditions` must be satisfied for the `AccessLevel` to be
        # applied. Default behavior is AND.
        # Corresponds to the JSON property `combiningFunction`
        # @return [String]
        attr_accessor :combining_function
      
        # Required. A list of requirements for the `AccessLevel` to be granted.
        # Corresponds to the JSON property `conditions`
        # @return [Array<Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1Condition>]
        attr_accessor :conditions
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @combining_function = args[:combining_function] if args.key?(:combining_function)
          @conditions = args[:conditions] if args.key?(:conditions)
        end
      end
      
      # A condition necessary for an `AccessLevel` to be granted. The Condition is an
      # AND over its fields. So a Condition is true if: 1) the request IP is from one
      # of the listed subnetworks AND 2) the originating device complies with the
      # listed device policy AND 3) all listed access levels are granted AND 4) the
      # request was sent at a time allowed by the DateTimeRestriction.
      class GoogleIdentityAccesscontextmanagerV1Condition
        include Google::Apis::Core::Hashable
      
        # `DevicePolicy` specifies device specific restrictions necessary to acquire a
        # given access level. A `DevicePolicy` specifies requirements for requests from
        # devices to be granted access levels, it does not do any enforcement on the
        # device. `DevicePolicy` acts as an AND over all specified fields, and each
        # repeated field is an OR over its elements. Any unset fields are ignored. For
        # example, if the proto is ` os_type : DESKTOP_WINDOWS, os_type : DESKTOP_LINUX,
        # encryption_status: ENCRYPTED`, then the DevicePolicy will be true for requests
        # originating from encrypted Linux desktops and encrypted Windows desktops.
        # Corresponds to the JSON property `devicePolicy`
        # @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1DevicePolicy]
        attr_accessor :device_policy
      
        # CIDR block IP subnetwork specification. May be IPv4 or IPv6. Note that for a
        # CIDR IP address block, the specified IP address portion must be properly
        # truncated (i.e. all the host bits must be zero) or the input is considered
        # malformed. For example, "192.0.2.0/24" is accepted but "192.0.2.1/24" is not.
        # Similarly, for IPv6, "2001:db8::/32" is accepted whereas "2001:db8::1/32" is
        # not. The originating IP of a request must be in one of the listed subnets in
        # order for this Condition to be true. If empty, all IP addresses are allowed.
        # Corresponds to the JSON property `ipSubnetworks`
        # @return [Array<String>]
        attr_accessor :ip_subnetworks
      
        # The request must be made by one of the provided user or service accounts.
        # Groups are not supported. Syntax: `user:`emailid`` `serviceAccount:`emailid``
        # If not specified, a request may come from any user.
        # Corresponds to the JSON property `members`
        # @return [Array<String>]
        attr_accessor :members
      
        # Whether to negate the Condition. If true, the Condition becomes a NAND over
        # its non-empty fields, each field must be false for the Condition overall to be
        # satisfied. Defaults to false.
        # Corresponds to the JSON property `negate`
        # @return [Boolean]
        attr_accessor :negate
        alias_method :negate?, :negate
      
        # The request must originate from one of the provided countries/regions. Must be
        # valid ISO 3166-1 alpha-2 codes.
        # Corresponds to the JSON property `regions`
        # @return [Array<String>]
        attr_accessor :regions
      
        # A list of other access levels defined in the same `Policy`, referenced by
        # resource name. Referencing an `AccessLevel` which does not exist is an error.
        # All access levels listed must be granted for the Condition to be true. Example:
        # "`accessPolicies/MY_POLICY/accessLevels/LEVEL_NAME"`
        # Corresponds to the JSON property `requiredAccessLevels`
        # @return [Array<String>]
        attr_accessor :required_access_levels
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @device_policy = args[:device_policy] if args.key?(:device_policy)
          @ip_subnetworks = args[:ip_subnetworks] if args.key?(:ip_subnetworks)
          @members = args[:members] if args.key?(:members)
          @negate = args[:negate] if args.key?(:negate)
          @regions = args[:regions] if args.key?(:regions)
          @required_access_levels = args[:required_access_levels] if args.key?(:required_access_levels)
        end
      end
      
      # `CustomLevel` is an `AccessLevel` using the Cloud Common Expression Language
      # to represent the necessary conditions for the level to apply to a request. See
      # CEL spec at: https://github.com/google/cel-spec
      class GoogleIdentityAccesscontextmanagerV1CustomLevel
        include Google::Apis::Core::Hashable
      
        # Represents a textual expression in the Common Expression Language (CEL) syntax.
        # CEL is a C-like expression language. The syntax and semantics of CEL are
        # documented at https://github.com/google/cel-spec. Example (Comparison): title:
        # "Summary size limit" description: "Determines if a summary is less than 100
        # chars" expression: "document.summary.size() < 100" Example (Equality): title: "
        # Requestor is owner" description: "Determines if requestor is the document
        # owner" expression: "document.owner == request.auth.claims.email" Example (
        # Logic): title: "Public documents" description: "Determine whether the document
        # should be publicly visible" expression: "document.type != 'private' &&
        # document.type != 'internal'" Example (Data Manipulation): title: "Notification
        # string" description: "Create a notification string with a timestamp."
        # expression: "'New message received at ' + string(document.create_time)" The
        # exact variables and functions that may be referenced within an expression are
        # determined by the service that evaluates it. See the service documentation for
        # additional information.
        # Corresponds to the JSON property `expr`
        # @return [Google::Apis::CloudassetV1::Expr]
        attr_accessor :expr
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @expr = args[:expr] if args.key?(:expr)
        end
      end
      
      # `DevicePolicy` specifies device specific restrictions necessary to acquire a
      # given access level. A `DevicePolicy` specifies requirements for requests from
      # devices to be granted access levels, it does not do any enforcement on the
      # device. `DevicePolicy` acts as an AND over all specified fields, and each
      # repeated field is an OR over its elements. Any unset fields are ignored. For
      # example, if the proto is ` os_type : DESKTOP_WINDOWS, os_type : DESKTOP_LINUX,
      # encryption_status: ENCRYPTED`, then the DevicePolicy will be true for requests
      # originating from encrypted Linux desktops and encrypted Windows desktops.
      class GoogleIdentityAccesscontextmanagerV1DevicePolicy
        include Google::Apis::Core::Hashable
      
        # Allowed device management levels, an empty list allows all management levels.
        # Corresponds to the JSON property `allowedDeviceManagementLevels`
        # @return [Array<String>]
        attr_accessor :allowed_device_management_levels
      
        # Allowed encryptions statuses, an empty list allows all statuses.
        # Corresponds to the JSON property `allowedEncryptionStatuses`
        # @return [Array<String>]
        attr_accessor :allowed_encryption_statuses
      
        # Allowed OS versions, an empty list allows all types and all versions.
        # Corresponds to the JSON property `osConstraints`
        # @return [Array<Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1OsConstraint>]
        attr_accessor :os_constraints
      
        # Whether the device needs to be approved by the customer admin.
        # Corresponds to the JSON property `requireAdminApproval`
        # @return [Boolean]
        attr_accessor :require_admin_approval
        alias_method :require_admin_approval?, :require_admin_approval
      
        # Whether the device needs to be corp owned.
        # Corresponds to the JSON property `requireCorpOwned`
        # @return [Boolean]
        attr_accessor :require_corp_owned
        alias_method :require_corp_owned?, :require_corp_owned
      
        # Whether or not screenlock is required for the DevicePolicy to be true.
        # Defaults to `false`.
        # Corresponds to the JSON property `requireScreenlock`
        # @return [Boolean]
        attr_accessor :require_screenlock
        alias_method :require_screenlock?, :require_screenlock
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @allowed_device_management_levels = args[:allowed_device_management_levels] if args.key?(:allowed_device_management_levels)
          @allowed_encryption_statuses = args[:allowed_encryption_statuses] if args.key?(:allowed_encryption_statuses)
          @os_constraints = args[:os_constraints] if args.key?(:os_constraints)
          @require_admin_approval = args[:require_admin_approval] if args.key?(:require_admin_approval)
          @require_corp_owned = args[:require_corp_owned] if args.key?(:require_corp_owned)
          @require_screenlock = args[:require_screenlock] if args.key?(:require_screenlock)
        end
      end
      
      # Defines the conditions under which an EgressPolicy matches a request.
      # Conditions based on information about the source of the request. Note that if
      # the destination of the request is protected by a ServicePerimeter, then that
      # ServicePerimeter must have an IngressPolicy which allows access in order for
      # this request to succeed.
      class GoogleIdentityAccesscontextmanagerV1EgressFrom
        include Google::Apis::Core::Hashable
      
        # A list of identities that are allowed access through this [EgressPolicy].
        # Should be in the format of email address. The email address should represent
        # individual user or service account only.
        # Corresponds to the JSON property `identities`
        # @return [Array<String>]
        attr_accessor :identities
      
        # Specifies the type of identities that are allowed access to outside the
        # perimeter. If left unspecified, then members of `identities` field will be
        # allowed access.
        # Corresponds to the JSON property `identityType`
        # @return [String]
        attr_accessor :identity_type
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @identities = args[:identities] if args.key?(:identities)
          @identity_type = args[:identity_type] if args.key?(:identity_type)
        end
      end
      
      # Policy for egress from perimeter. EgressPolicies match requests based on `
      # egress_from` and `egress_to` stanzas. For an EgressPolicy to match, both `
      # egress_from` and `egress_to` stanzas must be matched. If an EgressPolicy
      # matches a request, the request is allowed to span the ServicePerimeter
      # boundary. For example, an EgressPolicy can be used to allow VMs on networks
      # within the ServicePerimeter to access a defined set of projects outside the
      # perimeter in certain contexts (e.g. to read data from a Cloud Storage bucket
      # or query against a BigQuery dataset). EgressPolicies are concerned with the *
      # resources* that a request relates as well as the API services and API actions
      # being used. They do not related to the direction of data movement. More
      # detailed documentation for this concept can be found in the descriptions of
      # EgressFrom and EgressTo.
      class GoogleIdentityAccesscontextmanagerV1EgressPolicy
        include Google::Apis::Core::Hashable
      
        # Defines the conditions under which an EgressPolicy matches a request.
        # Conditions based on information about the source of the request. Note that if
        # the destination of the request is protected by a ServicePerimeter, then that
        # ServicePerimeter must have an IngressPolicy which allows access in order for
        # this request to succeed.
        # Corresponds to the JSON property `egressFrom`
        # @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1EgressFrom]
        attr_accessor :egress_from
      
        # Defines the conditions under which an EgressPolicy matches a request.
        # Conditions are based on information about the ApiOperation intended to be
        # performed on the `resources` specified. Note that if the destination of the
        # request is protected by a ServicePerimeter, then that ServicePerimeter must
        # have an IngressPolicy which allows access in order for this request to succeed.
        # Corresponds to the JSON property `egressTo`
        # @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1EgressTo]
        attr_accessor :egress_to
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @egress_from = args[:egress_from] if args.key?(:egress_from)
          @egress_to = args[:egress_to] if args.key?(:egress_to)
        end
      end
      
      # Defines the conditions under which an EgressPolicy matches a request.
      # Conditions are based on information about the ApiOperation intended to be
      # performed on the `resources` specified. Note that if the destination of the
      # request is protected by a ServicePerimeter, then that ServicePerimeter must
      # have an IngressPolicy which allows access in order for this request to succeed.
      class GoogleIdentityAccesscontextmanagerV1EgressTo
        include Google::Apis::Core::Hashable
      
        # A list of ApiOperations that this egress rule applies to. A request matches if
        # it contains an operation/service in this list.
        # Corresponds to the JSON property `operations`
        # @return [Array<Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1ApiOperation>]
        attr_accessor :operations
      
        # A list of resources, currently only projects in the form `projects/`, that
        # match this to stanza. A request matches if it contains a resource in this list.
        # If `*` is specified for resources, then this EgressTo rule will authorize
        # access to all resources outside the perimeter.
        # Corresponds to the JSON property `resources`
        # @return [Array<String>]
        attr_accessor :resources
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @operations = args[:operations] if args.key?(:operations)
          @resources = args[:resources] if args.key?(:resources)
        end
      end
      
      # Defines the conditions under which an IngressPolicy matches a request.
      # Conditions are based on information about the source of the request.
      class GoogleIdentityAccesscontextmanagerV1IngressFrom
        include Google::Apis::Core::Hashable
      
        # A list of identities that are allowed access through this ingress policy.
        # Should be in the format of email address. The email address should represent
        # individual user or service account only.
        # Corresponds to the JSON property `identities`
        # @return [Array<String>]
        attr_accessor :identities
      
        # Specifies the type of identities that are allowed access from outside the
        # perimeter. If left unspecified, then members of `identities` field will be
        # allowed access.
        # Corresponds to the JSON property `identityType`
        # @return [String]
        attr_accessor :identity_type
      
        # Sources that this IngressPolicy authorizes access from.
        # Corresponds to the JSON property `sources`
        # @return [Array<Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1IngressSource>]
        attr_accessor :sources
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @identities = args[:identities] if args.key?(:identities)
          @identity_type = args[:identity_type] if args.key?(:identity_type)
          @sources = args[:sources] if args.key?(:sources)
        end
      end
      
      # Policy for ingress into ServicePerimeter. IngressPolicies match requests based
      # on `ingress_from` and `ingress_to` stanzas. For an ingress policy to match,
      # both the `ingress_from` and `ingress_to` stanzas must be matched. If an
      # IngressPolicy matches a request, the request is allowed through the perimeter
      # boundary from outside the perimeter. For example, access from the internet can
      # be allowed either based on an AccessLevel or, for traffic hosted on Google
      # Cloud, the project of the source network. For access from private networks,
      # using the project of the hosting network is required. Individual ingress
      # policies can be limited by restricting which services and/or actions they
      # match using the `ingress_to` field.
      class GoogleIdentityAccesscontextmanagerV1IngressPolicy
        include Google::Apis::Core::Hashable
      
        # Defines the conditions under which an IngressPolicy matches a request.
        # Conditions are based on information about the source of the request.
        # Corresponds to the JSON property `ingressFrom`
        # @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1IngressFrom]
        attr_accessor :ingress_from
      
        # Defines the conditions under which an IngressPolicy matches a request.
        # Conditions are based on information about the ApiOperation intended to be
        # performed on the destination of the request.
        # Corresponds to the JSON property `ingressTo`
        # @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1IngressTo]
        attr_accessor :ingress_to
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @ingress_from = args[:ingress_from] if args.key?(:ingress_from)
          @ingress_to = args[:ingress_to] if args.key?(:ingress_to)
        end
      end
      
      # The source that IngressPolicy authorizes access from.
      class GoogleIdentityAccesscontextmanagerV1IngressSource
        include Google::Apis::Core::Hashable
      
        # An AccessLevel resource name that allow resources within the ServicePerimeters
        # to be accessed from the internet. AccessLevels listed must be in the same
        # policy as this ServicePerimeter. Referencing a nonexistent AccessLevel will
        # cause an error. If no AccessLevel names are listed, resources within the
        # perimeter can only be accessed via Google Cloud calls with request origins
        # within the perimeter. Example: `accessPolicies/MY_POLICY/accessLevels/MY_LEVEL`
        # . If `*` is specified, then all IngressSources will be allowed.
        # Corresponds to the JSON property `accessLevel`
        # @return [String]
        attr_accessor :access_level
      
        # A Google Cloud resource that is allowed to ingress the perimeter. Requests
        # from these resources will be allowed to access perimeter data. Currently only
        # projects are allowed. Format: `projects/`project_number`` The project may be
        # in any Google Cloud organization, not just the organization that the perimeter
        # is defined in. `*` is not allowed, the case of allowing all Google Cloud
        # resources only is not supported.
        # Corresponds to the JSON property `resource`
        # @return [String]
        attr_accessor :resource
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @access_level = args[:access_level] if args.key?(:access_level)
          @resource = args[:resource] if args.key?(:resource)
        end
      end
      
      # Defines the conditions under which an IngressPolicy matches a request.
      # Conditions are based on information about the ApiOperation intended to be
      # performed on the destination of the request.
      class GoogleIdentityAccesscontextmanagerV1IngressTo
        include Google::Apis::Core::Hashable
      
        # A list of ApiOperations the sources specified in corresponding IngressFrom are
        # allowed to perform in this ServicePerimeter.
        # Corresponds to the JSON property `operations`
        # @return [Array<Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1ApiOperation>]
        attr_accessor :operations
      
        # A list of resources, currently only projects in the form `projects/`,
        # protected by this ServicePerimeter that are allowed to be accessed by sources
        # defined in the corresponding IngressFrom. A request matches if it contains a
        # resource in this list. If `*` is specified for resources, then this IngressTo
        # rule will authorize access to all resources inside the perimeter, provided
        # that the request also matches the `operations` field.
        # Corresponds to the JSON property `resources`
        # @return [Array<String>]
        attr_accessor :resources
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @operations = args[:operations] if args.key?(:operations)
          @resources = args[:resources] if args.key?(:resources)
        end
      end
      
      # An allowed method or permission of a service specified in ApiOperation.
      class GoogleIdentityAccesscontextmanagerV1MethodSelector
        include Google::Apis::Core::Hashable
      
        # Value for `method` should be a valid method name for the corresponding `
        # service_name` in ApiOperation. If `*` used as value for `method`, then ALL
        # methods and permissions are allowed.
        # Corresponds to the JSON property `method`
        # @return [String]
        attr_accessor :method_prop
      
        # Value for `permission` should be a valid Cloud IAM permission for the
        # corresponding `service_name` in ApiOperation.
        # Corresponds to the JSON property `permission`
        # @return [String]
        attr_accessor :permission
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @method_prop = args[:method_prop] if args.key?(:method_prop)
          @permission = args[:permission] if args.key?(:permission)
        end
      end
      
      # A restriction on the OS type and version of devices making requests.
      class GoogleIdentityAccesscontextmanagerV1OsConstraint
        include Google::Apis::Core::Hashable
      
        # The minimum allowed OS version. If not set, any version of this OS satisfies
        # the constraint. Format: `"major.minor.patch"`. Examples: `"10.5.301"`, `"9.2.1"
        # `.
        # Corresponds to the JSON property `minimumVersion`
        # @return [String]
        attr_accessor :minimum_version
      
        # Required. The allowed OS type.
        # Corresponds to the JSON property `osType`
        # @return [String]
        attr_accessor :os_type
      
        # Only allows requests from devices with a verified Chrome OS. Verifications
        # includes requirements that the device is enterprise-managed, conformant to
        # domain policies, and the caller has permission to call the API targeted by the
        # request.
        # Corresponds to the JSON property `requireVerifiedChromeOs`
        # @return [Boolean]
        attr_accessor :require_verified_chrome_os
        alias_method :require_verified_chrome_os?, :require_verified_chrome_os
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @minimum_version = args[:minimum_version] if args.key?(:minimum_version)
          @os_type = args[:os_type] if args.key?(:os_type)
          @require_verified_chrome_os = args[:require_verified_chrome_os] if args.key?(:require_verified_chrome_os)
        end
      end
      
      # `ServicePerimeter` describes a set of Google Cloud resources which can freely
      # import and export data amongst themselves, but not export outside of the `
      # ServicePerimeter`. If a request with a source within this `ServicePerimeter`
      # has a target outside of the `ServicePerimeter`, the request will be blocked.
      # Otherwise the request is allowed. There are two types of Service Perimeter -
      # Regular and Bridge. Regular Service Perimeters cannot overlap, a single Google
      # Cloud project can only belong to a single regular Service Perimeter. Service
      # Perimeter Bridges can contain only Google Cloud projects as members, a single
      # Google Cloud project may belong to multiple Service Perimeter Bridges.
      class GoogleIdentityAccesscontextmanagerV1ServicePerimeter
        include Google::Apis::Core::Hashable
      
        # Description of the `ServicePerimeter` and its use. Does not affect behavior.
        # Corresponds to the JSON property `description`
        # @return [String]
        attr_accessor :description
      
        # Required. Resource name for the ServicePerimeter. The `short_name` component
        # must begin with a letter and only include alphanumeric and '_'. Format: `
        # accessPolicies/`policy_id`/servicePerimeters/`short_name``
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # Perimeter type indicator. A single project is allowed to be a member of single
        # regular perimeter, but multiple service perimeter bridges. A project cannot be
        # a included in a perimeter bridge without being included in regular perimeter.
        # For perimeter bridges, the restricted service list as well as access level
        # lists must be empty.
        # Corresponds to the JSON property `perimeterType`
        # @return [String]
        attr_accessor :perimeter_type
      
        # `ServicePerimeterConfig` specifies a set of Google Cloud resources that
        # describe specific Service Perimeter configuration.
        # Corresponds to the JSON property `spec`
        # @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1ServicePerimeterConfig]
        attr_accessor :spec
      
        # `ServicePerimeterConfig` specifies a set of Google Cloud resources that
        # describe specific Service Perimeter configuration.
        # Corresponds to the JSON property `status`
        # @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1ServicePerimeterConfig]
        attr_accessor :status
      
        # Human readable title. Must be unique within the Policy.
        # Corresponds to the JSON property `title`
        # @return [String]
        attr_accessor :title
      
        # Use explicit dry run spec flag. Ordinarily, a dry-run spec implicitly exists
        # for all Service Perimeters, and that spec is identical to the status for those
        # Service Perimeters. When this flag is set, it inhibits the generation of the
        # implicit spec, thereby allowing the user to explicitly provide a configuration
        # ("spec") to use in a dry-run version of the Service Perimeter. This allows the
        # user to test changes to the enforced config ("status") without actually
        # enforcing them. This testing is done through analyzing the differences between
        # currently enforced and suggested restrictions. use_explicit_dry_run_spec must
        # bet set to True if any of the fields in the spec are set to non-default values.
        # Corresponds to the JSON property `useExplicitDryRunSpec`
        # @return [Boolean]
        attr_accessor :use_explicit_dry_run_spec
        alias_method :use_explicit_dry_run_spec?, :use_explicit_dry_run_spec
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @description = args[:description] if args.key?(:description)
          @name = args[:name] if args.key?(:name)
          @perimeter_type = args[:perimeter_type] if args.key?(:perimeter_type)
          @spec = args[:spec] if args.key?(:spec)
          @status = args[:status] if args.key?(:status)
          @title = args[:title] if args.key?(:title)
          @use_explicit_dry_run_spec = args[:use_explicit_dry_run_spec] if args.key?(:use_explicit_dry_run_spec)
        end
      end
      
      # `ServicePerimeterConfig` specifies a set of Google Cloud resources that
      # describe specific Service Perimeter configuration.
      class GoogleIdentityAccesscontextmanagerV1ServicePerimeterConfig
        include Google::Apis::Core::Hashable
      
        # A list of `AccessLevel` resource names that allow resources within the `
        # ServicePerimeter` to be accessed from the internet. `AccessLevels` listed must
        # be in the same policy as this `ServicePerimeter`. Referencing a nonexistent `
        # AccessLevel` is a syntax error. If no `AccessLevel` names are listed,
        # resources within the perimeter can only be accessed via Google Cloud calls
        # with request origins within the perimeter. Example: `"accessPolicies/MY_POLICY/
        # accessLevels/MY_LEVEL"`. For Service Perimeter Bridge, must be empty.
        # Corresponds to the JSON property `accessLevels`
        # @return [Array<String>]
        attr_accessor :access_levels
      
        # List of EgressPolicies to apply to the perimeter. A perimeter may have
        # multiple EgressPolicies, each of which is evaluated separately. Access is
        # granted if any EgressPolicy grants it. Must be empty for a perimeter bridge.
        # Corresponds to the JSON property `egressPolicies`
        # @return [Array<Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1EgressPolicy>]
        attr_accessor :egress_policies
      
        # List of IngressPolicies to apply to the perimeter. A perimeter may have
        # multiple IngressPolicies, each of which is evaluated separately. Access is
        # granted if any Ingress Policy grants it. Must be empty for a perimeter bridge.
        # Corresponds to the JSON property `ingressPolicies`
        # @return [Array<Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1IngressPolicy>]
        attr_accessor :ingress_policies
      
        # A list of Google Cloud resources that are inside of the service perimeter.
        # Currently only projects are allowed. Format: `projects/`project_number``
        # Corresponds to the JSON property `resources`
        # @return [Array<String>]
        attr_accessor :resources
      
        # Google Cloud services that are subject to the Service Perimeter restrictions.
        # For example, if `storage.googleapis.com` is specified, access to the storage
        # buckets inside the perimeter must meet the perimeter's access restrictions.
        # Corresponds to the JSON property `restrictedServices`
        # @return [Array<String>]
        attr_accessor :restricted_services
      
        # Specifies how APIs are allowed to communicate within the Service Perimeter.
        # Corresponds to the JSON property `vpcAccessibleServices`
        # @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1VpcAccessibleServices]
        attr_accessor :vpc_accessible_services
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @access_levels = args[:access_levels] if args.key?(:access_levels)
          @egress_policies = args[:egress_policies] if args.key?(:egress_policies)
          @ingress_policies = args[:ingress_policies] if args.key?(:ingress_policies)
          @resources = args[:resources] if args.key?(:resources)
          @restricted_services = args[:restricted_services] if args.key?(:restricted_services)
          @vpc_accessible_services = args[:vpc_accessible_services] if args.key?(:vpc_accessible_services)
        end
      end
      
      # Specifies how APIs are allowed to communicate within the Service Perimeter.
      class GoogleIdentityAccesscontextmanagerV1VpcAccessibleServices
        include Google::Apis::Core::Hashable
      
        # The list of APIs usable within the Service Perimeter. Must be empty unless '
        # enable_restriction' is True. You can specify a list of individual services, as
        # well as include the 'RESTRICTED-SERVICES' value, which automatically includes
        # all of the services protected by the perimeter.
        # Corresponds to the JSON property `allowedServices`
        # @return [Array<String>]
        attr_accessor :allowed_services
      
        # Whether to restrict API calls within the Service Perimeter to the list of APIs
        # specified in 'allowed_services'.
        # Corresponds to the JSON property `enableRestriction`
        # @return [Boolean]
        attr_accessor :enable_restriction
        alias_method :enable_restriction?, :enable_restriction
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @allowed_services = args[:allowed_services] if args.key?(:allowed_services)
          @enable_restriction = args[:enable_restriction] if args.key?(:enable_restriction)
        end
      end
      
      # An analysis message to group the query and results.
      class IamPolicyAnalysis
        include Google::Apis::Core::Hashable
      
        # ## LINT.IfChange Keep in sync with ## logs/proto/cloud_asset_inventory/
        # iam_policy_analyzer_log.proto IAM policy analysis query message.
        # Corresponds to the JSON property `analysisQuery`
        # @return [Google::Apis::CloudassetV1::IamPolicyAnalysisQuery]
        attr_accessor :analysis_query
      
        # A list of IamPolicyAnalysisResult that matches the analysis query, or empty if
        # no result is found.
        # Corresponds to the JSON property `analysisResults`
        # @return [Array<Google::Apis::CloudassetV1::IamPolicyAnalysisResult>]
        attr_accessor :analysis_results
      
        # Represents whether all entries in the analysis_results have been fully
        # explored to answer the query.
        # Corresponds to the JSON property `fullyExplored`
        # @return [Boolean]
        attr_accessor :fully_explored
        alias_method :fully_explored?, :fully_explored
      
        # A list of non-critical errors happened during the query handling.
        # Corresponds to the JSON property `nonCriticalErrors`
        # @return [Array<Google::Apis::CloudassetV1::IamPolicyAnalysisState>]
        attr_accessor :non_critical_errors
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @analysis_query = args[:analysis_query] if args.key?(:analysis_query)
          @analysis_results = args[:analysis_results] if args.key?(:analysis_results)
          @fully_explored = args[:fully_explored] if args.key?(:fully_explored)
          @non_critical_errors = args[:non_critical_errors] if args.key?(:non_critical_errors)
        end
      end
      
      # Output configuration for export IAM policy analysis destination.
      class IamPolicyAnalysisOutputConfig
        include Google::Apis::Core::Hashable
      
        # A BigQuery destination.
        # Corresponds to the JSON property `bigqueryDestination`
        # @return [Google::Apis::CloudassetV1::GoogleCloudAssetV1BigQueryDestination]
        attr_accessor :bigquery_destination
      
        # A Cloud Storage location.
        # Corresponds to the JSON property `gcsDestination`
        # @return [Google::Apis::CloudassetV1::GoogleCloudAssetV1GcsDestination]
        attr_accessor :gcs_destination
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @bigquery_destination = args[:bigquery_destination] if args.key?(:bigquery_destination)
          @gcs_destination = args[:gcs_destination] if args.key?(:gcs_destination)
        end
      end
      
      # ## LINT.IfChange Keep in sync with ## logs/proto/cloud_asset_inventory/
      # iam_policy_analyzer_log.proto IAM policy analysis query message.
      class IamPolicyAnalysisQuery
        include Google::Apis::Core::Hashable
      
        # Specifies roles and/or permissions to analyze, to determine both the
        # identities possessing them and the resources they control. If multiple values
        # are specified, results will include roles or permissions matching any of them.
        # The total number of roles and permissions should be equal or less than 10.
        # Corresponds to the JSON property `accessSelector`
        # @return [Google::Apis::CloudassetV1::AccessSelector]
        attr_accessor :access_selector
      
        # Specifies an identity for which to determine resource access, based on roles
        # assigned either directly to them or to the groups they belong to, directly or
        # indirectly.
        # Corresponds to the JSON property `identitySelector`
        # @return [Google::Apis::CloudassetV1::IdentitySelector]
        attr_accessor :identity_selector
      
        # Contains query options.
        # Corresponds to the JSON property `options`
        # @return [Google::Apis::CloudassetV1::Options]
        attr_accessor :options
      
        # Specifies the resource to analyze for access policies, which may be set
        # directly on the resource, or on ancestors such as organizations, folders or
        # projects.
        # Corresponds to the JSON property `resourceSelector`
        # @return [Google::Apis::CloudassetV1::ResourceSelector]
        attr_accessor :resource_selector
      
        # Required. The relative name of the root asset. Only resources and IAM policies
        # within the scope will be analyzed. This can only be an organization number (
        # such as "organizations/123"), a folder number (such as "folders/123"), a
        # project ID (such as "projects/my-project-id"), or a project number (such as "
        # projects/12345"). To know how to get organization id, visit [here ](https://
        # cloud.google.com/resource-manager/docs/creating-managing-organization#
        # retrieving_your_organization_id). To know how to get folder or project id,
        # visit [here ](https://cloud.google.com/resource-manager/docs/creating-managing-
        # folders#viewing_or_listing_folders_and_projects).
        # Corresponds to the JSON property `scope`
        # @return [String]
        attr_accessor :scope
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @access_selector = args[:access_selector] if args.key?(:access_selector)
          @identity_selector = args[:identity_selector] if args.key?(:identity_selector)
          @options = args[:options] if args.key?(:options)
          @resource_selector = args[:resource_selector] if args.key?(:resource_selector)
          @scope = args[:scope] if args.key?(:scope)
        end
      end
      
      # IAM Policy analysis result, consisting of one IAM policy binding and derived
      # access control lists.
      class IamPolicyAnalysisResult
        include Google::Apis::Core::Hashable
      
        # The access control lists derived from the iam_binding that match or
        # potentially match resource and access selectors specified in the request.
        # Corresponds to the JSON property `accessControlLists`
        # @return [Array<Google::Apis::CloudassetV1::GoogleCloudAssetV1AccessControlList>]
        attr_accessor :access_control_lists
      
        # The [full resource name](https://cloud.google.com/asset-inventory/docs/
        # resource-name-format) of the resource to which the iam_binding policy attaches.
        # Corresponds to the JSON property `attachedResourceFullName`
        # @return [String]
        attr_accessor :attached_resource_full_name
      
        # Represents whether all analyses on the iam_binding have successfully finished.
        # Corresponds to the JSON property `fullyExplored`
        # @return [Boolean]
        attr_accessor :fully_explored
        alias_method :fully_explored?, :fully_explored
      
        # Associates `members` with a `role`.
        # Corresponds to the JSON property `iamBinding`
        # @return [Google::Apis::CloudassetV1::Binding]
        attr_accessor :iam_binding
      
        # The identities and group edges.
        # Corresponds to the JSON property `identityList`
        # @return [Google::Apis::CloudassetV1::GoogleCloudAssetV1IdentityList]
        attr_accessor :identity_list
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @access_control_lists = args[:access_control_lists] if args.key?(:access_control_lists)
          @attached_resource_full_name = args[:attached_resource_full_name] if args.key?(:attached_resource_full_name)
          @fully_explored = args[:fully_explored] if args.key?(:fully_explored)
          @iam_binding = args[:iam_binding] if args.key?(:iam_binding)
          @identity_list = args[:identity_list] if args.key?(:identity_list)
        end
      end
      
      # Represents the detailed state of an entity under analysis, such as a resource,
      # an identity or an access.
      class IamPolicyAnalysisState
        include Google::Apis::Core::Hashable
      
        # The human-readable description of the cause of failure.
        # Corresponds to the JSON property `cause`
        # @return [String]
        attr_accessor :cause
      
        # The Google standard error code that best describes the state. For example: -
        # OK means the analysis on this entity has been successfully finished; -
        # PERMISSION_DENIED means an access denied error is encountered; -
        # DEADLINE_EXCEEDED means the analysis on this entity hasn't been started in
        # time;
        # Corresponds to the JSON property `code`
        # @return [String]
        attr_accessor :code
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @cause = args[:cause] if args.key?(:cause)
          @code = args[:code] if args.key?(:code)
        end
      end
      
      # A result of IAM Policy search, containing information of an IAM policy.
      class IamPolicySearchResult
        include Google::Apis::Core::Hashable
      
        # Explanation about the IAM policy search result.
        # Corresponds to the JSON property `explanation`
        # @return [Google::Apis::CloudassetV1::Explanation]
        attr_accessor :explanation
      
        # An Identity and Access Management (IAM) policy, which specifies access
        # controls for Google Cloud resources. A `Policy` is a collection of `bindings`.
        # A `binding` binds one or more `members` to a single `role`. Members can be
        # user accounts, service accounts, Google groups, and domains (such as G Suite).
        # A `role` is a named list of permissions; each `role` can be an IAM predefined
        # role or a user-created custom role. For some types of Google Cloud resources,
        # a `binding` can also specify a `condition`, which is a logical expression that
        # allows access to a resource only if the expression evaluates to `true`. A
        # condition can add constraints based on attributes of the request, the resource,
        # or both. To learn which resources support conditions in their IAM policies,
        # see the [IAM documentation](https://cloud.google.com/iam/help/conditions/
        # resource-policies). **JSON example:** ` "bindings": [ ` "role": "roles/
        # resourcemanager.organizationAdmin", "members": [ "user:mike@example.com", "
        # group:admins@example.com", "domain:google.com", "serviceAccount:my-project-id@
        # appspot.gserviceaccount.com" ] `, ` "role": "roles/resourcemanager.
        # organizationViewer", "members": [ "user:eve@example.com" ], "condition": ` "
        # title": "expirable access", "description": "Does not grant access after Sep
        # 2020", "expression": "request.time < timestamp('2020-10-01T00:00:00.000Z')", `
        # ` ], "etag": "BwWWja0YfJA=", "version": 3 ` **YAML example:** bindings: -
        # members: - user:mike@example.com - group:admins@example.com - domain:google.
        # com - serviceAccount:my-project-id@appspot.gserviceaccount.com role: roles/
        # resourcemanager.organizationAdmin - members: - user:eve@example.com role:
        # roles/resourcemanager.organizationViewer condition: title: expirable access
        # description: Does not grant access after Sep 2020 expression: request.time <
        # timestamp('2020-10-01T00:00:00.000Z') - etag: BwWWja0YfJA= - version: 3 For a
        # description of IAM and its features, see the [IAM documentation](https://cloud.
        # google.com/iam/docs/).
        # Corresponds to the JSON property `policy`
        # @return [Google::Apis::CloudassetV1::Policy]
        attr_accessor :policy
      
        # Optional. The project that the associated GCP resource belongs to, in the form
        # of projects/`PROJECT_NUMBER`. If an IAM policy is set on a resource (like VM
        # instance, Cloud Storage bucket), the project field will indicate the project
        # that contains the resource. If an IAM policy is set on a folder or orgnization,
        # the project field will be empty. To search against the `project`: * specify
        # the `scope` field as this project in your search request.
        # Corresponds to the JSON property `project`
        # @return [String]
        attr_accessor :project
      
        # Required. The full resource name of the resource associated with this IAM
        # policy. Example: `//compute.googleapis.com/projects/my_project_123/zones/zone1/
        # instances/instance1`. See [Cloud Asset Inventory Resource Name Format](https://
        # cloud.google.com/asset-inventory/docs/resource-name-format) for more
        # information. To search against the `resource`: * use a field query. Example: `
        # resource:organizations/123`
        # Corresponds to the JSON property `resource`
        # @return [String]
        attr_accessor :resource
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @explanation = args[:explanation] if args.key?(:explanation)
          @policy = args[:policy] if args.key?(:policy)
          @project = args[:project] if args.key?(:project)
          @resource = args[:resource] if args.key?(:resource)
        end
      end
      
      # Specifies an identity for which to determine resource access, based on roles
      # assigned either directly to them or to the groups they belong to, directly or
      # indirectly.
      class IdentitySelector
        include Google::Apis::Core::Hashable
      
        # Required. The identity appear in the form of members in [IAM policy binding](
        # https://cloud.google.com/iam/reference/rest/v1/Binding). The examples of
        # supported forms are: "user:mike@example.com", "group:admins@example.com", "
        # domain:google.com", "serviceAccount:my-project-id@appspot.gserviceaccount.com".
        # Notice that wildcard characters (such as * and ?) are not supported. You must
        # give a specific identity.
        # Corresponds to the JSON property `identity`
        # @return [String]
        attr_accessor :identity
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @identity = args[:identity] if args.key?(:identity)
        end
      end
      
      # The inventory details of a VM.
      class Inventory
        include Google::Apis::Core::Hashable
      
        # Inventory items related to the VM keyed by an opaque unique identifier for
        # each inventory item. The identifier is unique to each distinct and addressable
        # inventory item and will change, when there is a new package version.
        # Corresponds to the JSON property `items`
        # @return [Hash<String,Google::Apis::CloudassetV1::Item>]
        attr_accessor :items
      
        # Operating system information for the VM.
        # Corresponds to the JSON property `osInfo`
        # @return [Google::Apis::CloudassetV1::OsInfo]
        attr_accessor :os_info
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @items = args[:items] if args.key?(:items)
          @os_info = args[:os_info] if args.key?(:os_info)
        end
      end
      
      # A single piece of inventory on a VM.
      class Item
        include Google::Apis::Core::Hashable
      
        # Software package information of the operating system.
        # Corresponds to the JSON property `availablePackage`
        # @return [Google::Apis::CloudassetV1::SoftwarePackage]
        attr_accessor :available_package
      
        # When this inventory item was first detected.
        # Corresponds to the JSON property `createTime`
        # @return [String]
        attr_accessor :create_time
      
        # Identifier for this item, unique across items for this VM.
        # Corresponds to the JSON property `id`
        # @return [String]
        attr_accessor :id
      
        # Software package information of the operating system.
        # Corresponds to the JSON property `installedPackage`
        # @return [Google::Apis::CloudassetV1::SoftwarePackage]
        attr_accessor :installed_package
      
        # The origin of this inventory item.
        # Corresponds to the JSON property `originType`
        # @return [String]
        attr_accessor :origin_type
      
        # The specific type of inventory, correlating to its specific details.
        # Corresponds to the JSON property `type`
        # @return [String]
        attr_accessor :type
      
        # When this inventory item was last modified.
        # Corresponds to the JSON property `updateTime`
        # @return [String]
        attr_accessor :update_time
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @available_package = args[:available_package] if args.key?(:available_package)
          @create_time = args[:create_time] if args.key?(:create_time)
          @id = args[:id] if args.key?(:id)
          @installed_package = args[:installed_package] if args.key?(:installed_package)
          @origin_type = args[:origin_type] if args.key?(:origin_type)
          @type = args[:type] if args.key?(:type)
          @update_time = args[:update_time] if args.key?(:update_time)
        end
      end
      
      # 
      class ListFeedsResponse
        include Google::Apis::Core::Hashable
      
        # A list of feeds.
        # Corresponds to the JSON property `feeds`
        # @return [Array<Google::Apis::CloudassetV1::Feed>]
        attr_accessor :feeds
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @feeds = args[:feeds] if args.key?(:feeds)
        end
      end
      
      # This resource represents a long-running operation that is the result of a
      # network API call.
      class Operation
        include Google::Apis::Core::Hashable
      
        # If the value is `false`, it means the operation is still in progress. If `true`
        # , the operation is completed, and either `error` or `response` is available.
        # Corresponds to the JSON property `done`
        # @return [Boolean]
        attr_accessor :done
        alias_method :done?, :done
      
        # The `Status` type defines a logical error model that is suitable for different
        # programming environments, including REST APIs and RPC APIs. It is used by [
        # gRPC](https://github.com/grpc). Each `Status` message contains three pieces of
        # data: error code, error message, and error details. You can find out more
        # about this error model and how to work with it in the [API Design Guide](https:
        # //cloud.google.com/apis/design/errors).
        # Corresponds to the JSON property `error`
        # @return [Google::Apis::CloudassetV1::Status]
        attr_accessor :error
      
        # Service-specific metadata associated with the operation. It typically contains
        # progress information and common metadata such as create time. Some services
        # might not provide such metadata. Any method that returns a long-running
        # operation should document the metadata type, if any.
        # Corresponds to the JSON property `metadata`
        # @return [Hash<String,Object>]
        attr_accessor :metadata
      
        # The server-assigned name, which is only unique within the same service that
        # originally returns it. If you use the default HTTP mapping, the `name` should
        # be a resource name ending with `operations/`unique_id``.
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # The normal response of the operation in case of success. If the original
        # method returns no data on success, such as `Delete`, the response is `google.
        # protobuf.Empty`. If the original method is standard `Get`/`Create`/`Update`,
        # the response should be the resource. For other methods, the response should
        # have the type `XxxResponse`, where `Xxx` is the original method name. For
        # example, if the original method name is `TakeSnapshot()`, the inferred
        # response type is `TakeSnapshotResponse`.
        # Corresponds to the JSON property `response`
        # @return [Hash<String,Object>]
        attr_accessor :response
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @done = args[:done] if args.key?(:done)
          @error = args[:error] if args.key?(:error)
          @metadata = args[:metadata] if args.key?(:metadata)
          @name = args[:name] if args.key?(:name)
          @response = args[:response] if args.key?(:response)
        end
      end
      
      # Contains query options.
      class Options
        include Google::Apis::Core::Hashable
      
        # Optional. If true, the response will include access analysis from identities
        # to resources via service account impersonation. This is a very expensive
        # operation, because many derived queries will be executed. We highly recommend
        # you use AssetService.AnalyzeIamPolicyLongrunning rpc instead. For example, if
        # the request analyzes for which resources user A has permission P, and there's
        # an IAM policy states user A has iam.serviceAccounts.getAccessToken permission
        # to a service account SA, and there's another IAM policy states service account
        # SA has permission P to a GCP folder F, then user A potentially has access to
        # the GCP folder F. And those advanced analysis results will be included in
        # AnalyzeIamPolicyResponse.service_account_impersonation_analysis. Another
        # example, if the request analyzes for who has permission P to a GCP folder F,
        # and there's an IAM policy states user A has iam.serviceAccounts.actAs
        # permission to a service account SA, and there's another IAM policy states
        # service account SA has permission P to the GCP folder F, then user A
        # potentially has access to the GCP folder F. And those advanced analysis
        # results will be included in AnalyzeIamPolicyResponse.
        # service_account_impersonation_analysis. Default is false.
        # Corresponds to the JSON property `analyzeServiceAccountImpersonation`
        # @return [Boolean]
        attr_accessor :analyze_service_account_impersonation
        alias_method :analyze_service_account_impersonation?, :analyze_service_account_impersonation
      
        # Optional. If true, the identities section of the result will expand any Google
        # groups appearing in an IAM policy binding. If IamPolicyAnalysisQuery.
        # identity_selector is specified, the identity in the result will be determined
        # by the selector, and this flag is not allowed to set. Default is false.
        # Corresponds to the JSON property `expandGroups`
        # @return [Boolean]
        attr_accessor :expand_groups
        alias_method :expand_groups?, :expand_groups
      
        # Optional. If true and IamPolicyAnalysisQuery.resource_selector is not
        # specified, the resource section of the result will expand any resource
        # attached to an IAM policy to include resources lower in the resource hierarchy.
        # For example, if the request analyzes for which resources user A has
        # permission P, and the results include an IAM policy with P on a GCP folder,
        # the results will also include resources in that folder with permission P. If
        # true and IamPolicyAnalysisQuery.resource_selector is specified, the resource
        # section of the result will expand the specified resource to include resources
        # lower in the resource hierarchy. Only project or lower resources are supported.
        # Folder and organization resource cannot be used together with this option.
        # For example, if the request analyzes for which users have permission P on a
        # GCP project with this option enabled, the results will include all users who
        # have permission P on that project or any lower resource. Default is false.
        # Corresponds to the JSON property `expandResources`
        # @return [Boolean]
        attr_accessor :expand_resources
        alias_method :expand_resources?, :expand_resources
      
        # Optional. If true, the access section of result will expand any roles
        # appearing in IAM policy bindings to include their permissions. If
        # IamPolicyAnalysisQuery.access_selector is specified, the access section of the
        # result will be determined by the selector, and this flag is not allowed to set.
        # Default is false.
        # Corresponds to the JSON property `expandRoles`
        # @return [Boolean]
        attr_accessor :expand_roles
        alias_method :expand_roles?, :expand_roles
      
        # Optional. If true, the result will output group identity edges, starting from
        # the binding's group members, to any expanded identities. Default is false.
        # Corresponds to the JSON property `outputGroupEdges`
        # @return [Boolean]
        attr_accessor :output_group_edges
        alias_method :output_group_edges?, :output_group_edges
      
        # Optional. If true, the result will output resource edges, starting from the
        # policy attached resource, to any expanded resources. Default is false.
        # Corresponds to the JSON property `outputResourceEdges`
        # @return [Boolean]
        attr_accessor :output_resource_edges
        alias_method :output_resource_edges?, :output_resource_edges
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @analyze_service_account_impersonation = args[:analyze_service_account_impersonation] if args.key?(:analyze_service_account_impersonation)
          @expand_groups = args[:expand_groups] if args.key?(:expand_groups)
          @expand_resources = args[:expand_resources] if args.key?(:expand_resources)
          @expand_roles = args[:expand_roles] if args.key?(:expand_roles)
          @output_group_edges = args[:output_group_edges] if args.key?(:output_group_edges)
          @output_resource_edges = args[:output_resource_edges] if args.key?(:output_resource_edges)
        end
      end
      
      # Operating system information for the VM.
      class OsInfo
        include Google::Apis::Core::Hashable
      
        # The system architecture of the operating system.
        # Corresponds to the JSON property `architecture`
        # @return [String]
        attr_accessor :architecture
      
        # The VM hostname.
        # Corresponds to the JSON property `hostname`
        # @return [String]
        attr_accessor :hostname
      
        # The kernel release of the operating system.
        # Corresponds to the JSON property `kernelRelease`
        # @return [String]
        attr_accessor :kernel_release
      
        # The kernel version of the operating system.
        # Corresponds to the JSON property `kernelVersion`
        # @return [String]
        attr_accessor :kernel_version
      
        # The operating system long name. For example 'Debian GNU/Linux 9' or 'Microsoft
        # Window Server 2019 Datacenter'.
        # Corresponds to the JSON property `longName`
        # @return [String]
        attr_accessor :long_name
      
        # The current version of the OS Config agent running on the VM.
        # Corresponds to the JSON property `osconfigAgentVersion`
        # @return [String]
        attr_accessor :osconfig_agent_version
      
        # The operating system short name. For example, 'windows' or 'debian'.
        # Corresponds to the JSON property `shortName`
        # @return [String]
        attr_accessor :short_name
      
        # The version of the operating system.
        # Corresponds to the JSON property `version`
        # @return [String]
        attr_accessor :version
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @architecture = args[:architecture] if args.key?(:architecture)
          @hostname = args[:hostname] if args.key?(:hostname)
          @kernel_release = args[:kernel_release] if args.key?(:kernel_release)
          @kernel_version = args[:kernel_version] if args.key?(:kernel_version)
          @long_name = args[:long_name] if args.key?(:long_name)
          @osconfig_agent_version = args[:osconfig_agent_version] if args.key?(:osconfig_agent_version)
          @short_name = args[:short_name] if args.key?(:short_name)
          @version = args[:version] if args.key?(:version)
        end
      end
      
      # Output configuration for export assets destination.
      class OutputConfig
        include Google::Apis::Core::Hashable
      
        # A BigQuery destination for exporting assets to.
        # Corresponds to the JSON property `bigqueryDestination`
        # @return [Google::Apis::CloudassetV1::BigQueryDestination]
        attr_accessor :bigquery_destination
      
        # A Cloud Storage location.
        # Corresponds to the JSON property `gcsDestination`
        # @return [Google::Apis::CloudassetV1::GcsDestination]
        attr_accessor :gcs_destination
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @bigquery_destination = args[:bigquery_destination] if args.key?(:bigquery_destination)
          @gcs_destination = args[:gcs_destination] if args.key?(:gcs_destination)
        end
      end
      
      # Specifications of BigQuery partitioned table as export destination.
      class PartitionSpec
        include Google::Apis::Core::Hashable
      
        # The partition key for BigQuery partitioned table.
        # Corresponds to the JSON property `partitionKey`
        # @return [String]
        attr_accessor :partition_key
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @partition_key = args[:partition_key] if args.key?(:partition_key)
        end
      end
      
      # IAM permissions
      class Permissions
        include Google::Apis::Core::Hashable
      
        # A list of permissions. A sample permission string: `compute.disk.get`.
        # Corresponds to the JSON property `permissions`
        # @return [Array<String>]
        attr_accessor :permissions
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @permissions = args[:permissions] if args.key?(:permissions)
        end
      end
      
      # An Identity and Access Management (IAM) policy, which specifies access
      # controls for Google Cloud resources. A `Policy` is a collection of `bindings`.
      # A `binding` binds one or more `members` to a single `role`. Members can be
      # user accounts, service accounts, Google groups, and domains (such as G Suite).
      # A `role` is a named list of permissions; each `role` can be an IAM predefined
      # role or a user-created custom role. For some types of Google Cloud resources,
      # a `binding` can also specify a `condition`, which is a logical expression that
      # allows access to a resource only if the expression evaluates to `true`. A
      # condition can add constraints based on attributes of the request, the resource,
      # or both. To learn which resources support conditions in their IAM policies,
      # see the [IAM documentation](https://cloud.google.com/iam/help/conditions/
      # resource-policies). **JSON example:** ` "bindings": [ ` "role": "roles/
      # resourcemanager.organizationAdmin", "members": [ "user:mike@example.com", "
      # group:admins@example.com", "domain:google.com", "serviceAccount:my-project-id@
      # appspot.gserviceaccount.com" ] `, ` "role": "roles/resourcemanager.
      # organizationViewer", "members": [ "user:eve@example.com" ], "condition": ` "
      # title": "expirable access", "description": "Does not grant access after Sep
      # 2020", "expression": "request.time < timestamp('2020-10-01T00:00:00.000Z')", `
      # ` ], "etag": "BwWWja0YfJA=", "version": 3 ` **YAML example:** bindings: -
      # members: - user:mike@example.com - group:admins@example.com - domain:google.
      # com - serviceAccount:my-project-id@appspot.gserviceaccount.com role: roles/
      # resourcemanager.organizationAdmin - members: - user:eve@example.com role:
      # roles/resourcemanager.organizationViewer condition: title: expirable access
      # description: Does not grant access after Sep 2020 expression: request.time <
      # timestamp('2020-10-01T00:00:00.000Z') - etag: BwWWja0YfJA= - version: 3 For a
      # description of IAM and its features, see the [IAM documentation](https://cloud.
      # google.com/iam/docs/).
      class Policy
        include Google::Apis::Core::Hashable
      
        # Specifies cloud audit logging configuration for this policy.
        # Corresponds to the JSON property `auditConfigs`
        # @return [Array<Google::Apis::CloudassetV1::AuditConfig>]
        attr_accessor :audit_configs
      
        # Associates a list of `members` to a `role`. Optionally, may specify a `
        # condition` that determines how and when the `bindings` are applied. Each of
        # the `bindings` must contain at least one member.
        # Corresponds to the JSON property `bindings`
        # @return [Array<Google::Apis::CloudassetV1::Binding>]
        attr_accessor :bindings
      
        # `etag` is used for optimistic concurrency control as a way to help prevent
        # simultaneous updates of a policy from overwriting each other. It is strongly
        # suggested that systems make use of the `etag` in the read-modify-write cycle
        # to perform policy updates in order to avoid race conditions: An `etag` is
        # returned in the response to `getIamPolicy`, and systems are expected to put
        # that etag in the request to `setIamPolicy` to ensure that their change will be
        # applied to the same version of the policy. **Important:** If you use IAM
        # Conditions, you must include the `etag` field whenever you call `setIamPolicy`.
        # If you omit this field, then IAM allows you to overwrite a version `3` policy
        # with a version `1` policy, and all of the conditions in the version `3` policy
        # are lost.
        # Corresponds to the JSON property `etag`
        # NOTE: Values are automatically base64 encoded/decoded in the client library.
        # @return [String]
        attr_accessor :etag
      
        # Specifies the format of the policy. Valid values are `0`, `1`, and `3`.
        # Requests that specify an invalid value are rejected. Any operation that
        # affects conditional role bindings must specify version `3`. This requirement
        # applies to the following operations: * Getting a policy that includes a
        # conditional role binding * Adding a conditional role binding to a policy *
        # Changing a conditional role binding in a policy * Removing any role binding,
        # with or without a condition, from a policy that includes conditions **
        # Important:** If you use IAM Conditions, you must include the `etag` field
        # whenever you call `setIamPolicy`. If you omit this field, then IAM allows you
        # to overwrite a version `3` policy with a version `1` policy, and all of the
        # conditions in the version `3` policy are lost. If a policy does not include
        # any conditions, operations on that policy may specify any valid version or
        # leave the field unset. To learn which resources support conditions in their
        # IAM policies, see the [IAM documentation](https://cloud.google.com/iam/help/
        # conditions/resource-policies).
        # Corresponds to the JSON property `version`
        # @return [Fixnum]
        attr_accessor :version
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @audit_configs = args[:audit_configs] if args.key?(:audit_configs)
          @bindings = args[:bindings] if args.key?(:bindings)
          @etag = args[:etag] if args.key?(:etag)
          @version = args[:version] if args.key?(:version)
        end
      end
      
      # A Pub/Sub destination.
      class PubsubDestination
        include Google::Apis::Core::Hashable
      
        # The name of the Pub/Sub topic to publish to. Example: `projects/PROJECT_ID/
        # topics/TOPIC_ID`.
        # Corresponds to the JSON property `topic`
        # @return [String]
        attr_accessor :topic
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @topic = args[:topic] if args.key?(:topic)
        end
      end
      
      # A representation of a Google Cloud resource.
      class Resource
        include Google::Apis::Core::Hashable
      
        # The content of the resource, in which some sensitive fields are removed and
        # may not be present.
        # Corresponds to the JSON property `data`
        # @return [Hash<String,Object>]
        attr_accessor :data
      
        # The URL of the discovery document containing the resource's JSON schema.
        # Example: `https://www.googleapis.com/discovery/v1/apis/compute/v1/rest` This
        # value is unspecified for resources that do not have an API based on a
        # discovery document, such as Cloud Bigtable.
        # Corresponds to the JSON property `discoveryDocumentUri`
        # @return [String]
        attr_accessor :discovery_document_uri
      
        # The JSON schema name listed in the discovery document. Example: `Project` This
        # value is unspecified for resources that do not have an API based on a
        # discovery document, such as Cloud Bigtable.
        # Corresponds to the JSON property `discoveryName`
        # @return [String]
        attr_accessor :discovery_name
      
        # The location of the resource in Google Cloud, such as its zone and region. For
        # more information, see https://cloud.google.com/about/locations/.
        # Corresponds to the JSON property `location`
        # @return [String]
        attr_accessor :location
      
        # The full name of the immediate parent of this resource. See [Resource Names](
        # https://cloud.google.com/apis/design/resource_names#full_resource_name) for
        # more information. For Google Cloud assets, this value is the parent resource
        # defined in the [Cloud IAM policy hierarchy](https://cloud.google.com/iam/docs/
        # overview#policy_hierarchy). Example: `//cloudresourcemanager.googleapis.com/
        # projects/my_project_123` For third-party assets, this field may be set
        # differently.
        # Corresponds to the JSON property `parent`
        # @return [String]
        attr_accessor :parent
      
        # The REST URL for accessing the resource. An HTTP `GET` request using this URL
        # returns the resource itself. Example: `https://cloudresourcemanager.googleapis.
        # com/v1/projects/my-project-123` This value is unspecified for resources
        # without a REST API.
        # Corresponds to the JSON property `resourceUrl`
        # @return [String]
        attr_accessor :resource_url
      
        # The API version. Example: `v1`
        # Corresponds to the JSON property `version`
        # @return [String]
        attr_accessor :version
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @data = args[:data] if args.key?(:data)
          @discovery_document_uri = args[:discovery_document_uri] if args.key?(:discovery_document_uri)
          @discovery_name = args[:discovery_name] if args.key?(:discovery_name)
          @location = args[:location] if args.key?(:location)
          @parent = args[:parent] if args.key?(:parent)
          @resource_url = args[:resource_url] if args.key?(:resource_url)
          @version = args[:version] if args.key?(:version)
        end
      end
      
      # A result of Resource Search, containing information of a cloud resource.
      class ResourceSearchResult
        include Google::Apis::Core::Hashable
      
        # Optional. The additional searchable attributes of this resource. The
        # attributes may vary from one resource type to another. Examples: `projectId`
        # for Project, `dnsName` for DNS ManagedZone. This field contains a subset of
        # the resource metadata fields that are returned by the List or Get APIs
        # provided by the corresponding GCP service (e.g., Compute Engine). see [API
        # references and supported searchable attributes](https://cloud.google.com/asset-
        # inventory/docs/supported-asset-types#searchable_asset_types) for more
        # information. You can search values of these fields through free text search.
        # However, you should not consume the field programically as the field names and
        # values may change as the GCP service updates to a new incompatible API version.
        # To search against the `additional_attributes`: * use a free text query to
        # match the attributes values. Example: to search `additional_attributes = `
        # dnsName: "foobar" ``, you can issue a query `foobar`.
        # Corresponds to the JSON property `additionalAttributes`
        # @return [Hash<String,Object>]
        attr_accessor :additional_attributes
      
        # Required. The type of this resource. Example: `compute.googleapis.com/Disk`.
        # To search against the `asset_type`: * specify the `asset_type` field in your
        # search request.
        # Corresponds to the JSON property `assetType`
        # @return [String]
        attr_accessor :asset_type
      
        # Optional. One or more paragraphs of text description of this resource. Maximum
        # length could be up to 1M bytes. This field is available only when the resource'
        # s proto contains it. To search against the `description`: * use a field query.
        # Example: `description:"*important instance*"` * use a free text query. Example:
        # `"*important instance*"`
        # Corresponds to the JSON property `description`
        # @return [String]
        attr_accessor :description
      
        # Optional. The display name of this resource. This field is available only when
        # the resource's proto contains it. To search against the `display_name`: * use
        # a field query. Example: `displayName:"My Instance"` * use a free text query.
        # Example: `"My Instance"`
        # Corresponds to the JSON property `displayName`
        # @return [String]
        attr_accessor :display_name
      
        # Optional. Labels associated with this resource. See [Labelling and grouping
        # GCP resources](https://cloud.google.com/blog/products/gcp/labelling-and-
        # grouping-your-google-cloud-platform-resources) for more information. This
        # field is available only when the resource's proto contains it. To search
        # against the `labels`: * use a field query: - query on any label's key or value.
        # Example: `labels:prod` - query by a given label. Example: `labels.env:prod` -
        # query by a given label's existence. Example: `labels.env:*` * use a free text
        # query. Example: `prod`
        # Corresponds to the JSON property `labels`
        # @return [Hash<String,String>]
        attr_accessor :labels
      
        # Optional. Location can be `global`, regional like `us-east1`, or zonal like `
        # us-west1-b`. This field is available only when the resource's proto contains
        # it. To search against the `location`: * use a field query. Example: `location:
        # us-west*` * use a free text query. Example: `us-west*`
        # Corresponds to the JSON property `location`
        # @return [String]
        attr_accessor :location
      
        # Required. The full resource name of this resource. Example: `//compute.
        # googleapis.com/projects/my_project_123/zones/zone1/instances/instance1`. See [
        # Cloud Asset Inventory Resource Name Format](https://cloud.google.com/asset-
        # inventory/docs/resource-name-format) for more information. To search against
        # the `name`: * use a field query. Example: `name:instance1` * use a free text
        # query. Example: `instance1`
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # Optional. Network tags associated with this resource. Like labels, network
        # tags are a type of annotations used to group GCP resources. See [Labelling GCP
        # resources](https://cloud.google.com/blog/products/gcp/labelling-and-grouping-
        # your-google-cloud-platform-resources) for more information. This field is
        # available only when the resource's proto contains it. To search against the `
        # network_tags`: * use a field query. Example: `networkTags:internal` * use a
        # free text query. Example: `internal`
        # Corresponds to the JSON property `networkTags`
        # @return [Array<String>]
        attr_accessor :network_tags
      
        # Optional. The project that this resource belongs to, in the form of projects/`
        # PROJECT_NUMBER`. This field is available when the resource belongs to a
        # project. To search against the `project`: * specify the `scope` field as this
        # project in your search request.
        # Corresponds to the JSON property `project`
        # @return [String]
        attr_accessor :project
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @additional_attributes = args[:additional_attributes] if args.key?(:additional_attributes)
          @asset_type = args[:asset_type] if args.key?(:asset_type)
          @description = args[:description] if args.key?(:description)
          @display_name = args[:display_name] if args.key?(:display_name)
          @labels = args[:labels] if args.key?(:labels)
          @location = args[:location] if args.key?(:location)
          @name = args[:name] if args.key?(:name)
          @network_tags = args[:network_tags] if args.key?(:network_tags)
          @project = args[:project] if args.key?(:project)
        end
      end
      
      # Specifies the resource to analyze for access policies, which may be set
      # directly on the resource, or on ancestors such as organizations, folders or
      # projects.
      class ResourceSelector
        include Google::Apis::Core::Hashable
      
        # Required. The [full resource name] (https://cloud.google.com/asset-inventory/
        # docs/resource-name-format) of a resource of [supported resource types](https://
        # cloud.google.com/asset-inventory/docs/supported-asset-types#
        # analyzable_asset_types).
        # Corresponds to the JSON property `fullResourceName`
        # @return [String]
        attr_accessor :full_resource_name
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @full_resource_name = args[:full_resource_name] if args.key?(:full_resource_name)
        end
      end
      
      # Search all IAM policies response.
      class SearchAllIamPoliciesResponse
        include Google::Apis::Core::Hashable
      
        # Set if there are more results than those appearing in this response; to get
        # the next set of results, call this method again, using this value as the `
        # page_token`.
        # Corresponds to the JSON property `nextPageToken`
        # @return [String]
        attr_accessor :next_page_token
      
        # A list of IamPolicy that match the search query. Related information such as
        # the associated resource is returned along with the policy.
        # Corresponds to the JSON property `results`
        # @return [Array<Google::Apis::CloudassetV1::IamPolicySearchResult>]
        attr_accessor :results
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @next_page_token = args[:next_page_token] if args.key?(:next_page_token)
          @results = args[:results] if args.key?(:results)
        end
      end
      
      # Search all resources response.
      class SearchAllResourcesResponse
        include Google::Apis::Core::Hashable
      
        # If there are more results than those appearing in this response, then `
        # next_page_token` is included. To get the next set of results, call this method
        # again using the value of `next_page_token` as `page_token`.
        # Corresponds to the JSON property `nextPageToken`
        # @return [String]
        attr_accessor :next_page_token
      
        # A list of Resources that match the search query. It contains the resource
        # standard metadata information.
        # Corresponds to the JSON property `results`
        # @return [Array<Google::Apis::CloudassetV1::ResourceSearchResult>]
        attr_accessor :results
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @next_page_token = args[:next_page_token] if args.key?(:next_page_token)
          @results = args[:results] if args.key?(:results)
        end
      end
      
      # Software package information of the operating system.
      class SoftwarePackage
        include Google::Apis::Core::Hashable
      
        # Information related to the a standard versioned package. This includes package
        # info for APT, Yum, Zypper, and Googet package managers.
        # Corresponds to the JSON property `aptPackage`
        # @return [Google::Apis::CloudassetV1::VersionedPackage]
        attr_accessor :apt_package
      
        # Information related to the a standard versioned package. This includes package
        # info for APT, Yum, Zypper, and Googet package managers.
        # Corresponds to the JSON property `cosPackage`
        # @return [Google::Apis::CloudassetV1::VersionedPackage]
        attr_accessor :cos_package
      
        # Information related to the a standard versioned package. This includes package
        # info for APT, Yum, Zypper, and Googet package managers.
        # Corresponds to the JSON property `googetPackage`
        # @return [Google::Apis::CloudassetV1::VersionedPackage]
        attr_accessor :googet_package
      
        # Information related to a Quick Fix Engineering package. Fields are taken from
        # Windows QuickFixEngineering Interface and match the source names: https://docs.
        # microsoft.com/en-us/windows/win32/cimwin32prov/win32-quickfixengineering
        # Corresponds to the JSON property `qfePackage`
        # @return [Google::Apis::CloudassetV1::WindowsQuickFixEngineeringPackage]
        attr_accessor :qfe_package
      
        # Details related to a Windows Update package. Field data and names are taken
        # from Windows Update API IUpdate Interface: https://docs.microsoft.com/en-us/
        # windows/win32/api/_wua/ Descriptive fields like title, and description are
        # localized based on the locale of the VM being updated.
        # Corresponds to the JSON property `wuaPackage`
        # @return [Google::Apis::CloudassetV1::WindowsUpdatePackage]
        attr_accessor :wua_package
      
        # Information related to the a standard versioned package. This includes package
        # info for APT, Yum, Zypper, and Googet package managers.
        # Corresponds to the JSON property `yumPackage`
        # @return [Google::Apis::CloudassetV1::VersionedPackage]
        attr_accessor :yum_package
      
        # Information related to the a standard versioned package. This includes package
        # info for APT, Yum, Zypper, and Googet package managers.
        # Corresponds to the JSON property `zypperPackage`
        # @return [Google::Apis::CloudassetV1::VersionedPackage]
        attr_accessor :zypper_package
      
        # Details related to a Zypper Patch.
        # Corresponds to the JSON property `zypperPatch`
        # @return [Google::Apis::CloudassetV1::ZypperPatch]
        attr_accessor :zypper_patch
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @apt_package = args[:apt_package] if args.key?(:apt_package)
          @cos_package = args[:cos_package] if args.key?(:cos_package)
          @googet_package = args[:googet_package] if args.key?(:googet_package)
          @qfe_package = args[:qfe_package] if args.key?(:qfe_package)
          @wua_package = args[:wua_package] if args.key?(:wua_package)
          @yum_package = args[:yum_package] if args.key?(:yum_package)
          @zypper_package = args[:zypper_package] if args.key?(:zypper_package)
          @zypper_patch = args[:zypper_patch] if args.key?(:zypper_patch)
        end
      end
      
      # The `Status` type defines a logical error model that is suitable for different
      # programming environments, including REST APIs and RPC APIs. It is used by [
      # gRPC](https://github.com/grpc). Each `Status` message contains three pieces of
      # data: error code, error message, and error details. You can find out more
      # about this error model and how to work with it in the [API Design Guide](https:
      # //cloud.google.com/apis/design/errors).
      class Status
        include Google::Apis::Core::Hashable
      
        # The status code, which should be an enum value of google.rpc.Code.
        # Corresponds to the JSON property `code`
        # @return [Fixnum]
        attr_accessor :code
      
        # A list of messages that carry the error details. There is a common set of
        # message types for APIs to use.
        # Corresponds to the JSON property `details`
        # @return [Array<Hash<String,Object>>]
        attr_accessor :details
      
        # A developer-facing error message, which should be in English. Any user-facing
        # error message should be localized and sent in the google.rpc.Status.details
        # field, or localized by the client.
        # Corresponds to the JSON property `message`
        # @return [String]
        attr_accessor :message
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @code = args[:code] if args.key?(:code)
          @details = args[:details] if args.key?(:details)
          @message = args[:message] if args.key?(:message)
        end
      end
      
      # An asset in Google Cloud and its temporal metadata, including the time window
      # when it was observed and its status during that window.
      class TemporalAsset
        include Google::Apis::Core::Hashable
      
        # An asset in Google Cloud. An asset can be any resource in the Google Cloud [
        # resource hierarchy](https://cloud.google.com/resource-manager/docs/cloud-
        # platform-resource-hierarchy), a resource outside the Google Cloud resource
        # hierarchy (such as Google Kubernetes Engine clusters and objects), or a policy
        # (e.g. Cloud IAM policy). See [Supported asset types](https://cloud.google.com/
        # asset-inventory/docs/supported-asset-types) for more information.
        # Corresponds to the JSON property `asset`
        # @return [Google::Apis::CloudassetV1::Asset]
        attr_accessor :asset
      
        # Whether the asset has been deleted or not.
        # Corresponds to the JSON property `deleted`
        # @return [Boolean]
        attr_accessor :deleted
        alias_method :deleted?, :deleted
      
        # An asset in Google Cloud. An asset can be any resource in the Google Cloud [
        # resource hierarchy](https://cloud.google.com/resource-manager/docs/cloud-
        # platform-resource-hierarchy), a resource outside the Google Cloud resource
        # hierarchy (such as Google Kubernetes Engine clusters and objects), or a policy
        # (e.g. Cloud IAM policy). See [Supported asset types](https://cloud.google.com/
        # asset-inventory/docs/supported-asset-types) for more information.
        # Corresponds to the JSON property `priorAsset`
        # @return [Google::Apis::CloudassetV1::Asset]
        attr_accessor :prior_asset
      
        # State of prior_asset.
        # Corresponds to the JSON property `priorAssetState`
        # @return [String]
        attr_accessor :prior_asset_state
      
        # A time window specified by its `start_time` and `end_time`.
        # Corresponds to the JSON property `window`
        # @return [Google::Apis::CloudassetV1::TimeWindow]
        attr_accessor :window
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @asset = args[:asset] if args.key?(:asset)
          @deleted = args[:deleted] if args.key?(:deleted)
          @prior_asset = args[:prior_asset] if args.key?(:prior_asset)
          @prior_asset_state = args[:prior_asset_state] if args.key?(:prior_asset_state)
          @window = args[:window] if args.key?(:window)
        end
      end
      
      # A time window specified by its `start_time` and `end_time`.
      class TimeWindow
        include Google::Apis::Core::Hashable
      
        # End time of the time window (inclusive). If not specified, the current
        # timestamp is used instead.
        # Corresponds to the JSON property `endTime`
        # @return [String]
        attr_accessor :end_time
      
        # Start time of the time window (exclusive).
        # Corresponds to the JSON property `startTime`
        # @return [String]
        attr_accessor :start_time
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @end_time = args[:end_time] if args.key?(:end_time)
          @start_time = args[:start_time] if args.key?(:start_time)
        end
      end
      
      # Update asset feed request.
      class UpdateFeedRequest
        include Google::Apis::Core::Hashable
      
        # An asset feed used to export asset updates to a destinations. An asset feed
        # filter controls what updates are exported. The asset feed must be created
        # within a project, organization, or folder. Supported destinations are: Pub/Sub
        # topics.
        # Corresponds to the JSON property `feed`
        # @return [Google::Apis::CloudassetV1::Feed]
        attr_accessor :feed
      
        # Required. Only updates the `feed` fields indicated by this mask. The field
        # mask must not be empty, and it must not contain fields that are immutable or
        # only set by the server.
        # Corresponds to the JSON property `updateMask`
        # @return [String]
        attr_accessor :update_mask
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @feed = args[:feed] if args.key?(:feed)
          @update_mask = args[:update_mask] if args.key?(:update_mask)
        end
      end
      
      # Information related to the a standard versioned package. This includes package
      # info for APT, Yum, Zypper, and Googet package managers.
      class VersionedPackage
        include Google::Apis::Core::Hashable
      
        # The system architecture this package is intended for.
        # Corresponds to the JSON property `architecture`
        # @return [String]
        attr_accessor :architecture
      
        # The name of the package.
        # Corresponds to the JSON property `packageName`
        # @return [String]
        attr_accessor :package_name
      
        # The version of the package.
        # Corresponds to the JSON property `version`
        # @return [String]
        attr_accessor :version
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @architecture = args[:architecture] if args.key?(:architecture)
          @package_name = args[:package_name] if args.key?(:package_name)
          @version = args[:version] if args.key?(:version)
        end
      end
      
      # Information related to a Quick Fix Engineering package. Fields are taken from
      # Windows QuickFixEngineering Interface and match the source names: https://docs.
      # microsoft.com/en-us/windows/win32/cimwin32prov/win32-quickfixengineering
      class WindowsQuickFixEngineeringPackage
        include Google::Apis::Core::Hashable
      
        # A short textual description of the QFE update.
        # Corresponds to the JSON property `caption`
        # @return [String]
        attr_accessor :caption
      
        # A textual description of the QFE update.
        # Corresponds to the JSON property `description`
        # @return [String]
        attr_accessor :description
      
        # Unique identifier associated with a particular QFE update.
        # Corresponds to the JSON property `hotFixId`
        # @return [String]
        attr_accessor :hot_fix_id
      
        # Date that the QFE update was installed. Mapped from installed_on field.
        # Corresponds to the JSON property `installTime`
        # @return [String]
        attr_accessor :install_time
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @caption = args[:caption] if args.key?(:caption)
          @description = args[:description] if args.key?(:description)
          @hot_fix_id = args[:hot_fix_id] if args.key?(:hot_fix_id)
          @install_time = args[:install_time] if args.key?(:install_time)
        end
      end
      
      # Categories specified by the Windows Update.
      class WindowsUpdateCategory
        include Google::Apis::Core::Hashable
      
        # The identifier of the windows update category.
        # Corresponds to the JSON property `id`
        # @return [String]
        attr_accessor :id
      
        # The name of the windows update category.
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @id = args[:id] if args.key?(:id)
          @name = args[:name] if args.key?(:name)
        end
      end
      
      # Details related to a Windows Update package. Field data and names are taken
      # from Windows Update API IUpdate Interface: https://docs.microsoft.com/en-us/
      # windows/win32/api/_wua/ Descriptive fields like title, and description are
      # localized based on the locale of the VM being updated.
      class WindowsUpdatePackage
        include Google::Apis::Core::Hashable
      
        # The categories that are associated with this update package.
        # Corresponds to the JSON property `categories`
        # @return [Array<Google::Apis::CloudassetV1::WindowsUpdateCategory>]
        attr_accessor :categories
      
        # The localized description of the update package.
        # Corresponds to the JSON property `description`
        # @return [String]
        attr_accessor :description
      
        # A collection of Microsoft Knowledge Base article IDs that are associated with
        # the update package.
        # Corresponds to the JSON property `kbArticleIds`
        # @return [Array<String>]
        attr_accessor :kb_article_ids
      
        # The last published date of the update, in (UTC) date and time.
        # Corresponds to the JSON property `lastDeploymentChangeTime`
        # @return [String]
        attr_accessor :last_deployment_change_time
      
        # A collection of URLs that provide more information about the update package.
        # Corresponds to the JSON property `moreInfoUrls`
        # @return [Array<String>]
        attr_accessor :more_info_urls
      
        # The revision number of this update package.
        # Corresponds to the JSON property `revisionNumber`
        # @return [Fixnum]
        attr_accessor :revision_number
      
        # A hyperlink to the language-specific support information for the update.
        # Corresponds to the JSON property `supportUrl`
        # @return [String]
        attr_accessor :support_url
      
        # The localized title of the update package.
        # Corresponds to the JSON property `title`
        # @return [String]
        attr_accessor :title
      
        # Gets the identifier of an update package. Stays the same across revisions.
        # Corresponds to the JSON property `updateId`
        # @return [String]
        attr_accessor :update_id
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @categories = args[:categories] if args.key?(:categories)
          @description = args[:description] if args.key?(:description)
          @kb_article_ids = args[:kb_article_ids] if args.key?(:kb_article_ids)
          @last_deployment_change_time = args[:last_deployment_change_time] if args.key?(:last_deployment_change_time)
          @more_info_urls = args[:more_info_urls] if args.key?(:more_info_urls)
          @revision_number = args[:revision_number] if args.key?(:revision_number)
          @support_url = args[:support_url] if args.key?(:support_url)
          @title = args[:title] if args.key?(:title)
          @update_id = args[:update_id] if args.key?(:update_id)
        end
      end
      
      # Details related to a Zypper Patch.
      class ZypperPatch
        include Google::Apis::Core::Hashable
      
        # The category of the patch.
        # Corresponds to the JSON property `category`
        # @return [String]
        attr_accessor :category
      
        # The name of the patch.
        # Corresponds to the JSON property `patchName`
        # @return [String]
        attr_accessor :patch_name
      
        # The severity specified for this patch
        # Corresponds to the JSON property `severity`
        # @return [String]
        attr_accessor :severity
      
        # Any summary information provided about this patch.
        # Corresponds to the JSON property `summary`
        # @return [String]
        attr_accessor :summary
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @category = args[:category] if args.key?(:category)
          @patch_name = args[:patch_name] if args.key?(:patch_name)
          @severity = args[:severity] if args.key?(:severity)
          @summary = args[:summary] if args.key?(:summary)
        end
      end
    end
  end
end