# Copyright 2015 Google Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

require 'date'
require 'google/apis/core/base_service'
require 'google/apis/core/json_representation'
require 'google/apis/core/hashable'
require 'google/apis/errors'

module Google
  module Apis
    module DataflowV1b3
      
      # Request to get updated debug configuration for component.
      class GetDebugConfigRequest
        include Google::Apis::Core::Hashable
      
        # The worker id, i.e., VM hostname.
        # Corresponds to the JSON property `workerId`
        # @return [String]
        attr_accessor :worker_id
      
        # The internal component id for which debug configuration is requested.
        # Corresponds to the JSON property `componentId`
        # @return [String]
        attr_accessor :component_id
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @worker_id = args[:worker_id] if args.key?(:worker_id)
          @component_id = args[:component_id] if args.key?(:component_id)
        end
      end
      
      # Response to a get debug configuration request.
      class GetDebugConfigResponse
        include Google::Apis::Core::Hashable
      
        # The encoded debug configuration for the requested component.
        # Corresponds to the JSON property `config`
        # @return [String]
        attr_accessor :config
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @config = args[:config] if args.key?(:config)
        end
      end
      
      # Request to send encoded debug information.
      class SendDebugCaptureRequest
        include Google::Apis::Core::Hashable
      
        # The worker id, i.e., VM hostname.
        # Corresponds to the JSON property `workerId`
        # @return [String]
        attr_accessor :worker_id
      
        # The internal component id for which debug information is sent.
        # Corresponds to the JSON property `componentId`
        # @return [String]
        attr_accessor :component_id
      
        # The encoded debug information.
        # Corresponds to the JSON property `data`
        # @return [String]
        attr_accessor :data
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @worker_id = args[:worker_id] if args.key?(:worker_id)
          @component_id = args[:component_id] if args.key?(:component_id)
          @data = args[:data] if args.key?(:data)
        end
      end
      
      # Response to a send capture request. nothing
      class SendDebugCaptureResponse
        include Google::Apis::Core::Hashable
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
        end
      end
      
      # Defines a job to be run by the Dataflow service.
      class Job
        include Google::Apis::Core::Hashable
      
        # The unique ID of this job. This field is set by the Dataflow service when the
        # Job is created, and is immutable for the life of the Job.
        # Corresponds to the JSON property `id`
        # @return [String]
        attr_accessor :id
      
        # The project which owns the job.
        # Corresponds to the JSON property `projectId`
        # @return [String]
        attr_accessor :project_id
      
        # The user-specified Dataflow job name. Only one Job with a given name may exist
        # in a project at any given time. If a caller attempts to create a Job with the
        # same name as an already-existing Job, the attempt will return the existing Job.
        # The name must match the regular expression [a-z]([-a-z0-9]`0,38`[a-z0-9])?
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # The type of dataflow job.
        # Corresponds to the JSON property `type`
        # @return [String]
        attr_accessor :type
      
        # Describes the environment in which a Dataflow Job runs.
        # Corresponds to the JSON property `environment`
        # @return [Google::Apis::DataflowV1b3::Environment]
        attr_accessor :environment
      
        # The top-level steps that constitute the entire job.
        # Corresponds to the JSON property `steps`
        # @return [Array<Google::Apis::DataflowV1b3::Step>]
        attr_accessor :steps
      
        # The current state of the job. Jobs are created in the JOB_STATE_STOPPED state
        # unless otherwise specified. A job in the JOB_STATE_RUNNING state may
        # asynchronously enter a terminal state. Once a job has reached a terminal state,
        # no further state updates may be made. This field may be mutated by the
        # Dataflow service; callers cannot mutate it.
        # Corresponds to the JSON property `currentState`
        # @return [String]
        attr_accessor :current_state
      
        # The timestamp associated with the current state.
        # Corresponds to the JSON property `currentStateTime`
        # @return [String]
        attr_accessor :current_state_time
      
        # The job's requested state. UpdateJob may be used to switch between the
        # JOB_STATE_STOPPED and JOB_STATE_RUNNING states, by setting requested_state.
        # UpdateJob may also be used to directly set a job's requested state to
        # JOB_STATE_CANCELLED or JOB_STATE_DONE, irrevocably terminating the job if it
        # has not already reached a terminal state.
        # Corresponds to the JSON property `requestedState`
        # @return [String]
        attr_accessor :requested_state
      
        # Additional information about how a Dataflow job will be executed which isn’t
        # contained in the submitted job.
        # Corresponds to the JSON property `executionInfo`
        # @return [Google::Apis::DataflowV1b3::JobExecutionInfo]
        attr_accessor :execution_info
      
        # Timestamp when job was initially created. Immutable, set by the Dataflow
        # service.
        # Corresponds to the JSON property `createTime`
        # @return [String]
        attr_accessor :create_time
      
        # If this job is an update of an existing job, this field will be the ID of the
        # job it replaced. When sending a CreateJobRequest, you can update a job by
        # specifying it here. The job named here will be stopped, and its intermediate
        # state transferred to this job.
        # Corresponds to the JSON property `replaceJobId`
        # @return [String]
        attr_accessor :replace_job_id
      
        # Map of transform name prefixes of the job to be replaced to the corresponding
        # name prefixes of the new job.
        # Corresponds to the JSON property `transformNameMapping`
        # @return [Hash<String,String>]
        attr_accessor :transform_name_mapping
      
        # Client's unique identifier of the job, re-used by SDK across retried attempts.
        # If this field is set, the service will ensure its uniqueness. That is, the
        # request to create a job will fail if the service has knowledge of a previously
        # submitted job with the same client's id and job name. The caller may, for
        # example, use this field to ensure idempotence of job creation across retried
        # attempts to create a job. By default, the field is empty and, in that case,
        # the service ignores it.
        # Corresponds to the JSON property `clientRequestId`
        # @return [String]
        attr_accessor :client_request_id
      
        # If another job is an update of this job (and thus, this job is in
        # JOB_STATE_UPDATED), this field will contain the ID of that job.
        # Corresponds to the JSON property `replacedByJobId`
        # @return [String]
        attr_accessor :replaced_by_job_id
      
        # A set of files the system should be aware of that are used for temporary
        # storage. These temporary files will be removed on job completion. No
        # duplicates are allowed. No file patterns are supported. The supported files
        # are: Google Cloud Storage: storage.googleapis.com/`bucket`/`object` bucket.
        # storage.googleapis.com/`object`
        # Corresponds to the JSON property `tempFiles`
        # @return [Array<String>]
        attr_accessor :temp_files
      
        # User-defined labels for this job. The labels map can contain no more than 64
        # entries. Entries of the labels map are UTF8 strings that comply with the
        # following restrictions: * Keys must conform to regexp: \p`Ll`\p`Lo``0,62` *
        # Values must conform to regexp: [\p`Ll`\p`Lo`\p`N`_-]`0,63` * Both keys and
        # values are additionally constrained to be <= 128 bytes in size.
        # Corresponds to the JSON property `labels`
        # @return [Hash<String,String>]
        attr_accessor :labels
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @id = args[:id] if args.key?(:id)
          @project_id = args[:project_id] if args.key?(:project_id)
          @name = args[:name] if args.key?(:name)
          @type = args[:type] if args.key?(:type)
          @environment = args[:environment] if args.key?(:environment)
          @steps = args[:steps] if args.key?(:steps)
          @current_state = args[:current_state] if args.key?(:current_state)
          @current_state_time = args[:current_state_time] if args.key?(:current_state_time)
          @requested_state = args[:requested_state] if args.key?(:requested_state)
          @execution_info = args[:execution_info] if args.key?(:execution_info)
          @create_time = args[:create_time] if args.key?(:create_time)
          @replace_job_id = args[:replace_job_id] if args.key?(:replace_job_id)
          @transform_name_mapping = args[:transform_name_mapping] if args.key?(:transform_name_mapping)
          @client_request_id = args[:client_request_id] if args.key?(:client_request_id)
          @replaced_by_job_id = args[:replaced_by_job_id] if args.key?(:replaced_by_job_id)
          @temp_files = args[:temp_files] if args.key?(:temp_files)
          @labels = args[:labels] if args.key?(:labels)
        end
      end
      
      # Describes the environment in which a Dataflow Job runs.
      class Environment
        include Google::Apis::Core::Hashable
      
        # The prefix of the resources the system should use for temporary storage. The
        # system will append the suffix "/temp-`JOBNAME` to this resource prefix, where `
        # JOBNAME` is the value of the job_name field. The resulting bucket and object
        # prefix is used as the prefix of the resources used to store temporary data
        # needed during the job execution. NOTE: This will override the value in
        # taskrunner_settings. The supported resource type is: Google Cloud Storage:
        # storage.googleapis.com/`bucket`/`object` bucket.storage.googleapis.com/`object`
        # Corresponds to the JSON property `tempStoragePrefix`
        # @return [String]
        attr_accessor :temp_storage_prefix
      
        # The type of cluster manager API to use. If unknown or unspecified, the service
        # will attempt to choose a reasonable default. This should be in the form of the
        # API service name, e.g. "compute.googleapis.com".
        # Corresponds to the JSON property `clusterManagerApiService`
        # @return [String]
        attr_accessor :cluster_manager_api_service
      
        # The list of experiments to enable.
        # Corresponds to the JSON property `experiments`
        # @return [Array<String>]
        attr_accessor :experiments
      
        # Worker pools. At least one "harness" worker pool must be specified in order
        # for the job to have workers.
        # Corresponds to the JSON property `workerPools`
        # @return [Array<Google::Apis::DataflowV1b3::WorkerPool>]
        attr_accessor :worker_pools
      
        # A description of the process that generated the request.
        # Corresponds to the JSON property `userAgent`
        # @return [Hash<String,Object>]
        attr_accessor :user_agent
      
        # A structure describing which components and their versions of the service are
        # required in order to run the job.
        # Corresponds to the JSON property `version`
        # @return [Hash<String,Object>]
        attr_accessor :version
      
        # The dataset for the current project where various workflow related tables are
        # stored. The supported resource type is: Google BigQuery: bigquery.googleapis.
        # com/`dataset`
        # Corresponds to the JSON property `dataset`
        # @return [String]
        attr_accessor :dataset
      
        # The Dataflow SDK pipeline options specified by the user. These options are
        # passed through the service and are used to recreate the SDK pipeline options
        # on the worker in a language agnostic and platform independent way.
        # Corresponds to the JSON property `sdkPipelineOptions`
        # @return [Hash<String,Object>]
        attr_accessor :sdk_pipeline_options
      
        # Experimental settings.
        # Corresponds to the JSON property `internalExperiments`
        # @return [Hash<String,Object>]
        attr_accessor :internal_experiments
      
        # Identity to run virtual machines as. Defaults to the default account.
        # Corresponds to the JSON property `serviceAccountEmail`
        # @return [String]
        attr_accessor :service_account_email
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @temp_storage_prefix = args[:temp_storage_prefix] if args.key?(:temp_storage_prefix)
          @cluster_manager_api_service = args[:cluster_manager_api_service] if args.key?(:cluster_manager_api_service)
          @experiments = args[:experiments] if args.key?(:experiments)
          @worker_pools = args[:worker_pools] if args.key?(:worker_pools)
          @user_agent = args[:user_agent] if args.key?(:user_agent)
          @version = args[:version] if args.key?(:version)
          @dataset = args[:dataset] if args.key?(:dataset)
          @sdk_pipeline_options = args[:sdk_pipeline_options] if args.key?(:sdk_pipeline_options)
          @internal_experiments = args[:internal_experiments] if args.key?(:internal_experiments)
          @service_account_email = args[:service_account_email] if args.key?(:service_account_email)
        end
      end
      
      # Describes one particular pool of Dataflow workers to be instantiated by the
      # Dataflow service in order to perform the computations required by a job. Note
      # that a workflow job may use multiple pools, in order to match the various
      # computational requirements of the various stages of the job.
      class WorkerPool
        include Google::Apis::Core::Hashable
      
        # The kind of the worker pool; currently only 'harness' and 'shuffle' are
        # supported.
        # Corresponds to the JSON property `kind`
        # @return [String]
        attr_accessor :kind
      
        # Number of Google Compute Engine workers in this pool needed to execute the job.
        # If zero or unspecified, the service will attempt to choose a reasonable
        # default.
        # Corresponds to the JSON property `numWorkers`
        # @return [Fixnum]
        attr_accessor :num_workers
      
        # Packages to be installed on workers.
        # Corresponds to the JSON property `packages`
        # @return [Array<Google::Apis::DataflowV1b3::Package>]
        attr_accessor :packages
      
        # The default package set to install. This allows the service to select a
        # default set of packages which are useful to worker harnesses written in a
        # particular language.
        # Corresponds to the JSON property `defaultPackageSet`
        # @return [String]
        attr_accessor :default_package_set
      
        # Machine type (e.g. "n1-standard-1"). If empty or unspecified, the service will
        # attempt to choose a reasonable default.
        # Corresponds to the JSON property `machineType`
        # @return [String]
        attr_accessor :machine_type
      
        # Sets the policy for determining when to turndown worker pool. Allowed values
        # are: TEARDOWN_ALWAYS, TEARDOWN_ON_SUCCESS, and TEARDOWN_NEVER. TEARDOWN_ALWAYS
        # means workers are always torn down regardless of whether the job succeeds.
        # TEARDOWN_ON_SUCCESS means workers are torn down if the job succeeds.
        # TEARDOWN_NEVER means the workers are never torn down. If the workers are not
        # torn down by the service, they will continue to run and use Google Compute
        # Engine VM resources in the user's project until they are explicitly terminated
        # by the user. Because of this, Google recommends using the TEARDOWN_ALWAYS
        # policy except for small, manually supervised test jobs. If unknown or
        # unspecified, the service will attempt to choose a reasonable default.
        # Corresponds to the JSON property `teardownPolicy`
        # @return [String]
        attr_accessor :teardown_policy
      
        # Size of root disk for VMs, in GB. If zero or unspecified, the service will
        # attempt to choose a reasonable default.
        # Corresponds to the JSON property `diskSizeGb`
        # @return [Fixnum]
        attr_accessor :disk_size_gb
      
        # Type of root disk for VMs. If empty or unspecified, the service will attempt
        # to choose a reasonable default.
        # Corresponds to the JSON property `diskType`
        # @return [String]
        attr_accessor :disk_type
      
        # Fully qualified source image for disks.
        # Corresponds to the JSON property `diskSourceImage`
        # @return [String]
        attr_accessor :disk_source_image
      
        # Zone to run the worker pools in. If empty or unspecified, the service will
        # attempt to choose a reasonable default.
        # Corresponds to the JSON property `zone`
        # @return [String]
        attr_accessor :zone
      
        # Taskrunner configuration settings.
        # Corresponds to the JSON property `taskrunnerSettings`
        # @return [Google::Apis::DataflowV1b3::TaskRunnerSettings]
        attr_accessor :taskrunner_settings
      
        # The action to take on host maintenance, as defined by the Google Compute
        # Engine API.
        # Corresponds to the JSON property `onHostMaintenance`
        # @return [String]
        attr_accessor :on_host_maintenance
      
        # Data disks that are used by a VM in this workflow.
        # Corresponds to the JSON property `dataDisks`
        # @return [Array<Google::Apis::DataflowV1b3::Disk>]
        attr_accessor :data_disks
      
        # Metadata to set on the Google Compute Engine VMs.
        # Corresponds to the JSON property `metadata`
        # @return [Hash<String,String>]
        attr_accessor :metadata
      
        # Settings for WorkerPool autoscaling.
        # Corresponds to the JSON property `autoscalingSettings`
        # @return [Google::Apis::DataflowV1b3::AutoscalingSettings]
        attr_accessor :autoscaling_settings
      
        # Extra arguments for this worker pool.
        # Corresponds to the JSON property `poolArgs`
        # @return [Hash<String,Object>]
        attr_accessor :pool_args
      
        # Network to which VMs will be assigned. If empty or unspecified, the service
        # will use the network "default".
        # Corresponds to the JSON property `network`
        # @return [String]
        attr_accessor :network
      
        # Subnetwork to which VMs will be assigned, if desired. Expected to be of the
        # form "regions/REGION/subnetworks/SUBNETWORK".
        # Corresponds to the JSON property `subnetwork`
        # @return [String]
        attr_accessor :subnetwork
      
        # Docker container image that executes Dataflow worker harness, residing in
        # Google Container Registry. Required.
        # Corresponds to the JSON property `workerHarnessContainerImage`
        # @return [String]
        attr_accessor :worker_harness_container_image
      
        # The number of threads per worker harness. If empty or unspecified, the service
        # will choose a number of threads (according to the number of cores on the
        # selected machine type for batch, or 1 by convention for streaming).
        # Corresponds to the JSON property `numThreadsPerWorker`
        # @return [Fixnum]
        attr_accessor :num_threads_per_worker
      
        # Configuration for VM IPs.
        # Corresponds to the JSON property `ipConfiguration`
        # @return [String]
        attr_accessor :ip_configuration
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @kind = args[:kind] if args.key?(:kind)
          @num_workers = args[:num_workers] if args.key?(:num_workers)
          @packages = args[:packages] if args.key?(:packages)
          @default_package_set = args[:default_package_set] if args.key?(:default_package_set)
          @machine_type = args[:machine_type] if args.key?(:machine_type)
          @teardown_policy = args[:teardown_policy] if args.key?(:teardown_policy)
          @disk_size_gb = args[:disk_size_gb] if args.key?(:disk_size_gb)
          @disk_type = args[:disk_type] if args.key?(:disk_type)
          @disk_source_image = args[:disk_source_image] if args.key?(:disk_source_image)
          @zone = args[:zone] if args.key?(:zone)
          @taskrunner_settings = args[:taskrunner_settings] if args.key?(:taskrunner_settings)
          @on_host_maintenance = args[:on_host_maintenance] if args.key?(:on_host_maintenance)
          @data_disks = args[:data_disks] if args.key?(:data_disks)
          @metadata = args[:metadata] if args.key?(:metadata)
          @autoscaling_settings = args[:autoscaling_settings] if args.key?(:autoscaling_settings)
          @pool_args = args[:pool_args] if args.key?(:pool_args)
          @network = args[:network] if args.key?(:network)
          @subnetwork = args[:subnetwork] if args.key?(:subnetwork)
          @worker_harness_container_image = args[:worker_harness_container_image] if args.key?(:worker_harness_container_image)
          @num_threads_per_worker = args[:num_threads_per_worker] if args.key?(:num_threads_per_worker)
          @ip_configuration = args[:ip_configuration] if args.key?(:ip_configuration)
        end
      end
      
      # Packages that need to be installed in order for a worker to run the steps of
      # the Dataflow job which will be assigned to its worker pool. This is the
      # mechanism by which the SDK causes code to be loaded onto the workers. For
      # example, the Dataflow Java SDK might use this to install jars containing the
      # user's code and all of the various dependencies (libraries, data files, etc)
      # required in order for that code to run.
      class Package
        include Google::Apis::Core::Hashable
      
        # The name of the package.
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # The resource to read the package from. The supported resource type is: Google
        # Cloud Storage: storage.googleapis.com/`bucket` bucket.storage.googleapis.com/
        # Corresponds to the JSON property `location`
        # @return [String]
        attr_accessor :location
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @name = args[:name] if args.key?(:name)
          @location = args[:location] if args.key?(:location)
        end
      end
      
      # Taskrunner configuration settings.
      class TaskRunnerSettings
        include Google::Apis::Core::Hashable
      
        # The UNIX user ID on the worker VM to use for tasks launched by taskrunner; e.g.
        # "root".
        # Corresponds to the JSON property `taskUser`
        # @return [String]
        attr_accessor :task_user
      
        # The UNIX group ID on the worker VM to use for tasks launched by taskrunner; e.
        # g. "wheel".
        # Corresponds to the JSON property `taskGroup`
        # @return [String]
        attr_accessor :task_group
      
        # OAuth2 scopes to be requested by the taskrunner in order to access the
        # dataflow API.
        # Corresponds to the JSON property `oauthScopes`
        # @return [Array<String>]
        attr_accessor :oauth_scopes
      
        # The base URL for the taskrunner to use when accessing Google Cloud APIs. When
        # workers access Google Cloud APIs, they logically do so via relative URLs. If
        # this field is specified, it supplies the base URL to use for resolving these
        # relative URLs. The normative algorithm used is defined by RFC 1808, "Relative
        # Uniform Resource Locators". If not specified, the default value is "http://www.
        # googleapis.com/"
        # Corresponds to the JSON property `baseUrl`
        # @return [String]
        attr_accessor :base_url
      
        # API version of endpoint, e.g. "v1b3"
        # Corresponds to the JSON property `dataflowApiVersion`
        # @return [String]
        attr_accessor :dataflow_api_version
      
        # Provides data to pass through to the worker harness.
        # Corresponds to the JSON property `parallelWorkerSettings`
        # @return [Google::Apis::DataflowV1b3::WorkerSettings]
        attr_accessor :parallel_worker_settings
      
        # Location on the worker for task-specific subdirectories.
        # Corresponds to the JSON property `baseTaskDir`
        # @return [String]
        attr_accessor :base_task_dir
      
        # Do we continue taskrunner if an exception is hit?
        # Corresponds to the JSON property `continueOnException`
        # @return [Boolean]
        attr_accessor :continue_on_exception
        alias_method :continue_on_exception?, :continue_on_exception
      
        # Send taskrunner log into to Google Compute Engine VM serial console?
        # Corresponds to the JSON property `logToSerialconsole`
        # @return [Boolean]
        attr_accessor :log_to_serialconsole
        alias_method :log_to_serialconsole?, :log_to_serialconsole
      
        # Also send taskrunner log info to stderr?
        # Corresponds to the JSON property `alsologtostderr`
        # @return [Boolean]
        attr_accessor :alsologtostderr
        alias_method :alsologtostderr?, :alsologtostderr
      
        # Indicates where to put logs. If this is not specified, the logs will not be
        # uploaded. The supported resource type is: Google Cloud Storage: storage.
        # googleapis.com/`bucket`/`object` bucket.storage.googleapis.com/`object`
        # Corresponds to the JSON property `logUploadLocation`
        # @return [String]
        attr_accessor :log_upload_location
      
        # Directory on the VM to store logs.
        # Corresponds to the JSON property `logDir`
        # @return [String]
        attr_accessor :log_dir
      
        # The prefix of the resources the taskrunner should use for temporary storage.
        # The supported resource type is: Google Cloud Storage: storage.googleapis.com/`
        # bucket`/`object` bucket.storage.googleapis.com/`object`
        # Corresponds to the JSON property `tempStoragePrefix`
        # @return [String]
        attr_accessor :temp_storage_prefix
      
        # Command to launch the worker harness.
        # Corresponds to the JSON property `harnessCommand`
        # @return [String]
        attr_accessor :harness_command
      
        # Store the workflow in this file.
        # Corresponds to the JSON property `workflowFileName`
        # @return [String]
        attr_accessor :workflow_file_name
      
        # Store preprocessing commands in this file.
        # Corresponds to the JSON property `commandlinesFileName`
        # @return [String]
        attr_accessor :commandlines_file_name
      
        # ID string of VM.
        # Corresponds to the JSON property `vmId`
        # @return [String]
        attr_accessor :vm_id
      
        # Suggested backend language.
        # Corresponds to the JSON property `languageHint`
        # @return [String]
        attr_accessor :language_hint
      
        # Streaming worker main class name.
        # Corresponds to the JSON property `streamingWorkerMainClass`
        # @return [String]
        attr_accessor :streaming_worker_main_class
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @task_user = args[:task_user] if args.key?(:task_user)
          @task_group = args[:task_group] if args.key?(:task_group)
          @oauth_scopes = args[:oauth_scopes] if args.key?(:oauth_scopes)
          @base_url = args[:base_url] if args.key?(:base_url)
          @dataflow_api_version = args[:dataflow_api_version] if args.key?(:dataflow_api_version)
          @parallel_worker_settings = args[:parallel_worker_settings] if args.key?(:parallel_worker_settings)
          @base_task_dir = args[:base_task_dir] if args.key?(:base_task_dir)
          @continue_on_exception = args[:continue_on_exception] if args.key?(:continue_on_exception)
          @log_to_serialconsole = args[:log_to_serialconsole] if args.key?(:log_to_serialconsole)
          @alsologtostderr = args[:alsologtostderr] if args.key?(:alsologtostderr)
          @log_upload_location = args[:log_upload_location] if args.key?(:log_upload_location)
          @log_dir = args[:log_dir] if args.key?(:log_dir)
          @temp_storage_prefix = args[:temp_storage_prefix] if args.key?(:temp_storage_prefix)
          @harness_command = args[:harness_command] if args.key?(:harness_command)
          @workflow_file_name = args[:workflow_file_name] if args.key?(:workflow_file_name)
          @commandlines_file_name = args[:commandlines_file_name] if args.key?(:commandlines_file_name)
          @vm_id = args[:vm_id] if args.key?(:vm_id)
          @language_hint = args[:language_hint] if args.key?(:language_hint)
          @streaming_worker_main_class = args[:streaming_worker_main_class] if args.key?(:streaming_worker_main_class)
        end
      end
      
      # Provides data to pass through to the worker harness.
      class WorkerSettings
        include Google::Apis::Core::Hashable
      
        # The base URL for accessing Google Cloud APIs. When workers access Google Cloud
        # APIs, they logically do so via relative URLs. If this field is specified, it
        # supplies the base URL to use for resolving these relative URLs. The normative
        # algorithm used is defined by RFC 1808, "Relative Uniform Resource Locators".
        # If not specified, the default value is "http://www.googleapis.com/"
        # Corresponds to the JSON property `baseUrl`
        # @return [String]
        attr_accessor :base_url
      
        # Send work progress updates to service.
        # Corresponds to the JSON property `reportingEnabled`
        # @return [Boolean]
        attr_accessor :reporting_enabled
        alias_method :reporting_enabled?, :reporting_enabled
      
        # The Dataflow service path relative to the root URL, for example, "dataflow/
        # v1b3/projects".
        # Corresponds to the JSON property `servicePath`
        # @return [String]
        attr_accessor :service_path
      
        # The Shuffle service path relative to the root URL, for example, "shuffle/
        # v1beta1".
        # Corresponds to the JSON property `shuffleServicePath`
        # @return [String]
        attr_accessor :shuffle_service_path
      
        # ID of the worker running this pipeline.
        # Corresponds to the JSON property `workerId`
        # @return [String]
        attr_accessor :worker_id
      
        # The prefix of the resources the system should use for temporary storage. The
        # supported resource type is: Google Cloud Storage: storage.googleapis.com/`
        # bucket`/`object` bucket.storage.googleapis.com/`object`
        # Corresponds to the JSON property `tempStoragePrefix`
        # @return [String]
        attr_accessor :temp_storage_prefix
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @base_url = args[:base_url] if args.key?(:base_url)
          @reporting_enabled = args[:reporting_enabled] if args.key?(:reporting_enabled)
          @service_path = args[:service_path] if args.key?(:service_path)
          @shuffle_service_path = args[:shuffle_service_path] if args.key?(:shuffle_service_path)
          @worker_id = args[:worker_id] if args.key?(:worker_id)
          @temp_storage_prefix = args[:temp_storage_prefix] if args.key?(:temp_storage_prefix)
        end
      end
      
      # Describes the data disk used by a workflow job.
      class Disk
        include Google::Apis::Core::Hashable
      
        # Size of disk in GB. If zero or unspecified, the service will attempt to choose
        # a reasonable default.
        # Corresponds to the JSON property `sizeGb`
        # @return [Fixnum]
        attr_accessor :size_gb
      
        # Disk storage type, as defined by Google Compute Engine. This must be a disk
        # type appropriate to the project and zone in which the workers will run. If
        # unknown or unspecified, the service will attempt to choose a reasonable
        # default. For example, the standard persistent disk type is a resource name
        # typically ending in "pd-standard". If SSD persistent disks are available, the
        # resource name typically ends with "pd-ssd". The actual valid values are
        # defined the Google Compute Engine API, not by the Dataflow API; consult the
        # Google Compute Engine documentation for more information about determining the
        # set of available disk types for a particular project and zone. Google Compute
        # Engine Disk types are local to a particular project in a particular zone, and
        # so the resource name will typically look something like this: compute.
        # googleapis.com/projects/
        # /zones//diskTypes/pd-standard
        # Corresponds to the JSON property `diskType`
        # @return [String]
        attr_accessor :disk_type
      
        # Directory in a VM where disk is mounted.
        # Corresponds to the JSON property `mountPoint`
        # @return [String]
        attr_accessor :mount_point
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @size_gb = args[:size_gb] if args.key?(:size_gb)
          @disk_type = args[:disk_type] if args.key?(:disk_type)
          @mount_point = args[:mount_point] if args.key?(:mount_point)
        end
      end
      
      # Settings for WorkerPool autoscaling.
      class AutoscalingSettings
        include Google::Apis::Core::Hashable
      
        # The algorithm to use for autoscaling.
        # Corresponds to the JSON property `algorithm`
        # @return [String]
        attr_accessor :algorithm
      
        # The maximum number of workers to cap scaling at.
        # Corresponds to the JSON property `maxNumWorkers`
        # @return [Fixnum]
        attr_accessor :max_num_workers
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @algorithm = args[:algorithm] if args.key?(:algorithm)
          @max_num_workers = args[:max_num_workers] if args.key?(:max_num_workers)
        end
      end
      
      # Defines a particular step within a Dataflow job. A job consists of multiple
      # steps, each of which performs some specific operation as part of the overall
      # job. Data is typically passed from one step to another as part of the job.
      # Here's an example of a sequence of steps which together implement a Map-Reduce
      # job: * Read a collection of data from some source, parsing the collection's
      # elements. * Validate the elements. * Apply a user-defined function to map each
      # element to some value and extract an element-specific key value. * Group
      # elements with the same key into a single element with that key, transforming a
      # multiply-keyed collection into a uniquely-keyed collection. * Write the
      # elements out to some data sink. (Note that the Dataflow service may be used to
      # run many different types of jobs, not just Map-Reduce).
      class Step
        include Google::Apis::Core::Hashable
      
        # The kind of step in the dataflow Job.
        # Corresponds to the JSON property `kind`
        # @return [String]
        attr_accessor :kind
      
        # Name identifying the step. This must be unique for each step with respect to
        # all other steps in the dataflow Job.
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # Named properties associated with the step. Each kind of predefined step has
        # its own required set of properties.
        # Corresponds to the JSON property `properties`
        # @return [Hash<String,Object>]
        attr_accessor :properties
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @kind = args[:kind] if args.key?(:kind)
          @name = args[:name] if args.key?(:name)
          @properties = args[:properties] if args.key?(:properties)
        end
      end
      
      # Additional information about how a Dataflow job will be executed which isn’t
      # contained in the submitted job.
      class JobExecutionInfo
        include Google::Apis::Core::Hashable
      
        # A mapping from each stage to the information about that stage.
        # Corresponds to the JSON property `stages`
        # @return [Hash<String,Google::Apis::DataflowV1b3::JobExecutionStageInfo>]
        attr_accessor :stages
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @stages = args[:stages] if args.key?(:stages)
        end
      end
      
      # Contains information about how a particular google.dataflow.v1beta3.Step will
      # be executed.
      class JobExecutionStageInfo
        include Google::Apis::Core::Hashable
      
        # The steps associated with the execution stage. Note that stages may have
        # several steps, and that a given step might be run by more than one stage.
        # Corresponds to the JSON property `stepName`
        # @return [Array<String>]
        attr_accessor :step_name
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @step_name = args[:step_name] if args.key?(:step_name)
        end
      end
      
      # Response to a request to list Dataflow jobs. This may be a partial response,
      # depending on the page size in the ListJobsRequest.
      class ListJobsResponse
        include Google::Apis::Core::Hashable
      
        # A subset of the requested job information.
        # Corresponds to the JSON property `jobs`
        # @return [Array<Google::Apis::DataflowV1b3::Job>]
        attr_accessor :jobs
      
        # Set if there may be more results than fit in this response.
        # Corresponds to the JSON property `nextPageToken`
        # @return [String]
        attr_accessor :next_page_token
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @jobs = args[:jobs] if args.key?(:jobs)
          @next_page_token = args[:next_page_token] if args.key?(:next_page_token)
        end
      end
      
      # Response to a request to list job messages.
      class ListJobMessagesResponse
        include Google::Apis::Core::Hashable
      
        # Messages in ascending timestamp order.
        # Corresponds to the JSON property `jobMessages`
        # @return [Array<Google::Apis::DataflowV1b3::JobMessage>]
        attr_accessor :job_messages
      
        # The token to obtain the next page of results if there are more.
        # Corresponds to the JSON property `nextPageToken`
        # @return [String]
        attr_accessor :next_page_token
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @job_messages = args[:job_messages] if args.key?(:job_messages)
          @next_page_token = args[:next_page_token] if args.key?(:next_page_token)
        end
      end
      
      # A particular message pertaining to a Dataflow job.
      class JobMessage
        include Google::Apis::Core::Hashable
      
        # Identifies the message. This is automatically generated by the service; the
        # caller should treat it as an opaque string.
        # Corresponds to the JSON property `id`
        # @return [String]
        attr_accessor :id
      
        # The timestamp of the message.
        # Corresponds to the JSON property `time`
        # @return [String]
        attr_accessor :time
      
        # The text of the message.
        # Corresponds to the JSON property `messageText`
        # @return [String]
        attr_accessor :message_text
      
        # Importance level of the message.
        # Corresponds to the JSON property `messageImportance`
        # @return [String]
        attr_accessor :message_importance
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @id = args[:id] if args.key?(:id)
          @time = args[:time] if args.key?(:time)
          @message_text = args[:message_text] if args.key?(:message_text)
          @message_importance = args[:message_importance] if args.key?(:message_importance)
        end
      end
      
      # JobMetrics contains a collection of metrics descibing the detailed progress of
      # a Dataflow job. Metrics correspond to user-defined and system-defined metrics
      # in the job. This resource captures only the most recent values of each metric;
      # time-series data can be queried for them (under the same metric names) from
      # Cloud Monitoring.
      class JobMetrics
        include Google::Apis::Core::Hashable
      
        # Timestamp as of which metric values are current.
        # Corresponds to the JSON property `metricTime`
        # @return [String]
        attr_accessor :metric_time
      
        # All metrics for this job.
        # Corresponds to the JSON property `metrics`
        # @return [Array<Google::Apis::DataflowV1b3::MetricUpdate>]
        attr_accessor :metrics
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @metric_time = args[:metric_time] if args.key?(:metric_time)
          @metrics = args[:metrics] if args.key?(:metrics)
        end
      end
      
      # Describes the state of a metric.
      class MetricUpdate
        include Google::Apis::Core::Hashable
      
        # Identifies a metric, by describing the source which generated the metric.
        # Corresponds to the JSON property `name`
        # @return [Google::Apis::DataflowV1b3::MetricStructuredName]
        attr_accessor :name
      
        # Metric aggregation kind. The possible metric aggregation kinds are "Sum", "Max"
        # , "Min", "Mean", "Set", "And", and "Or". The specified aggregation kind is
        # case-insensitive. If omitted, this is not an aggregated value but instead a
        # single metric sample value.
        # Corresponds to the JSON property `kind`
        # @return [String]
        attr_accessor :kind
      
        # True if this metric is reported as the total cumulative aggregate value
        # accumulated since the worker started working on this WorkItem. By default this
        # is false, indicating that this metric is reported as a delta that is not
        # associated with any WorkItem.
        # Corresponds to the JSON property `cumulative`
        # @return [Boolean]
        attr_accessor :cumulative
        alias_method :cumulative?, :cumulative
      
        # Worker-computed aggregate value for aggregation kinds "Sum", "Max", "Min", "
        # And", and "Or". The possible value types are Long, Double, and Boolean.
        # Corresponds to the JSON property `scalar`
        # @return [Object]
        attr_accessor :scalar
      
        # Worker-computed aggregate value for the "Mean" aggregation kind. This holds
        # the sum of the aggregated values and is used in combination with mean_count
        # below to obtain the actual mean aggregate value. The only possible value types
        # are Long and Double.
        # Corresponds to the JSON property `meanSum`
        # @return [Object]
        attr_accessor :mean_sum
      
        # Worker-computed aggregate value for the "Mean" aggregation kind. This holds
        # the count of the aggregated values and is used in combination with mean_sum
        # above to obtain the actual mean aggregate value. The only possible value type
        # is Long.
        # Corresponds to the JSON property `meanCount`
        # @return [Object]
        attr_accessor :mean_count
      
        # Worker-computed aggregate value for the "Set" aggregation kind. The only
        # possible value type is a list of Values whose type can be Long, Double, or
        # String, according to the metric's type. All Values in the list must be of the
        # same type.
        # Corresponds to the JSON property `set`
        # @return [Object]
        attr_accessor :set
      
        # Worker-computed aggregate value for internal use by the Dataflow service.
        # Corresponds to the JSON property `internal`
        # @return [Object]
        attr_accessor :internal
      
        # Timestamp associated with the metric value. Optional when workers are
        # reporting work progress; it will be filled in responses from the metrics API.
        # Corresponds to the JSON property `updateTime`
        # @return [String]
        attr_accessor :update_time
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @name = args[:name] if args.key?(:name)
          @kind = args[:kind] if args.key?(:kind)
          @cumulative = args[:cumulative] if args.key?(:cumulative)
          @scalar = args[:scalar] if args.key?(:scalar)
          @mean_sum = args[:mean_sum] if args.key?(:mean_sum)
          @mean_count = args[:mean_count] if args.key?(:mean_count)
          @set = args[:set] if args.key?(:set)
          @internal = args[:internal] if args.key?(:internal)
          @update_time = args[:update_time] if args.key?(:update_time)
        end
      end
      
      # Identifies a metric, by describing the source which generated the metric.
      class MetricStructuredName
        include Google::Apis::Core::Hashable
      
        # Origin (namespace) of metric name. May be blank for user-define metrics; will
        # be "dataflow" for metrics defined by the Dataflow service or SDK.
        # Corresponds to the JSON property `origin`
        # @return [String]
        attr_accessor :origin
      
        # Worker-defined metric name.
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # Zero or more labeled fields which identify the part of the job this metric is
        # associated with, such as the name of a step or collection. For example, built-
        # in counters associated with steps will have context['step'] = . Counters
        # associated with PCollections in the SDK will have context['pcollection'] =
        # .
        # Corresponds to the JSON property `context`
        # @return [Hash<String,String>]
        attr_accessor :context
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @origin = args[:origin] if args.key?(:origin)
          @name = args[:name] if args.key?(:name)
          @context = args[:context] if args.key?(:context)
        end
      end
      
      # Request to create a Dataflow job.
      class CreateJobFromTemplateRequest
        include Google::Apis::Core::Hashable
      
        # A path to the serialized JSON representation of the job.
        # Corresponds to the JSON property `gcsPath`
        # @return [String]
        attr_accessor :gcs_path
      
        # Dynamic parameterization of the job's runtime environment.
        # Corresponds to the JSON property `parameters`
        # @return [Hash<String,String>]
        attr_accessor :parameters
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @gcs_path = args[:gcs_path] if args.key?(:gcs_path)
          @parameters = args[:parameters] if args.key?(:parameters)
        end
      end
      
      # Request to report the status of WorkItems.
      class ReportWorkItemStatusRequest
        include Google::Apis::Core::Hashable
      
        # The ID of the worker reporting the WorkItem status. If this does not match the
        # ID of the worker which the Dataflow service believes currently has the lease
        # on the WorkItem, the report will be dropped (with an error response).
        # Corresponds to the JSON property `workerId`
        # @return [String]
        attr_accessor :worker_id
      
        # The order is unimportant, except that the order of the WorkItemServiceState
        # messages in the ReportWorkItemStatusResponse corresponds to the order of
        # WorkItemStatus messages here.
        # Corresponds to the JSON property `workItemStatuses`
        # @return [Array<Google::Apis::DataflowV1b3::WorkItemStatus>]
        attr_accessor :work_item_statuses
      
        # The current timestamp at the worker.
        # Corresponds to the JSON property `currentWorkerTime`
        # @return [String]
        attr_accessor :current_worker_time
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @worker_id = args[:worker_id] if args.key?(:worker_id)
          @work_item_statuses = args[:work_item_statuses] if args.key?(:work_item_statuses)
          @current_worker_time = args[:current_worker_time] if args.key?(:current_worker_time)
        end
      end
      
      # Conveys a worker's progress through the work described by a WorkItem.
      class WorkItemStatus
        include Google::Apis::Core::Hashable
      
        # Identifies the WorkItem.
        # Corresponds to the JSON property `workItemId`
        # @return [String]
        attr_accessor :work_item_id
      
        # The report index. When a WorkItem is leased, the lease will contain an initial
        # report index. When a WorkItem's status is reported to the system, the report
        # should be sent with that report index, and the response will contain the index
        # the worker should use for the next report. Reports received with unexpected
        # index values will be rejected by the service. In order to preserve idempotency,
        # the worker should not alter the contents of a report, even if the worker must
        # submit the same report multiple times before getting back a response. The
        # worker should not submit a subsequent report until the response for the
        # previous report had been received from the service.
        # Corresponds to the JSON property `reportIndex`
        # @return [String]
        attr_accessor :report_index
      
        # Amount of time the worker requests for its lease.
        # Corresponds to the JSON property `requestedLeaseDuration`
        # @return [String]
        attr_accessor :requested_lease_duration
      
        # True if the WorkItem was completed (successfully or unsuccessfully).
        # Corresponds to the JSON property `completed`
        # @return [Boolean]
        attr_accessor :completed
        alias_method :completed?, :completed
      
        # Specifies errors which occurred during processing. If errors are provided, and
        # completed = true, then the WorkItem is considered to have failed.
        # Corresponds to the JSON property `errors`
        # @return [Array<Google::Apis::DataflowV1b3::Status>]
        attr_accessor :errors
      
        # Worker output counters for this WorkItem.
        # Corresponds to the JSON property `counterUpdates`
        # @return [Array<Google::Apis::DataflowV1b3::CounterUpdate>]
        attr_accessor :counter_updates
      
        # DEPRECATED in favor of counter_updates.
        # Corresponds to the JSON property `metricUpdates`
        # @return [Array<Google::Apis::DataflowV1b3::MetricUpdate>]
        attr_accessor :metric_updates
      
        # A progress measurement of a WorkItem by a worker.
        # Corresponds to the JSON property `reportedProgress`
        # @return [Google::Apis::DataflowV1b3::ApproximateReportedProgress]
        attr_accessor :reported_progress
      
        # Position defines a position within a collection of data. The value can be
        # either the end position, a key (used with ordered collections), a byte offset,
        # or a record index.
        # Corresponds to the JSON property `stopPosition`
        # @return [Google::Apis::DataflowV1b3::Position]
        attr_accessor :stop_position
      
        # When a task splits using WorkItemStatus.dynamic_source_split, this message
        # describes the two parts of the split relative to the description of the
        # current task's input.
        # Corresponds to the JSON property `dynamicSourceSplit`
        # @return [Google::Apis::DataflowV1b3::DynamicSourceSplit]
        attr_accessor :dynamic_source_split
      
        # The result of a SourceOperationRequest, specified in
        # ReportWorkItemStatusRequest.source_operation when the work item is completed.
        # Corresponds to the JSON property `sourceOperationResponse`
        # @return [Google::Apis::DataflowV1b3::SourceOperationResponse]
        attr_accessor :source_operation_response
      
        # DEPRECATED in favor of DynamicSourceSplit.
        # Corresponds to the JSON property `sourceFork`
        # @return [Google::Apis::DataflowV1b3::SourceFork]
        attr_accessor :source_fork
      
        # Obsolete in favor of ApproximateReportedProgress and ApproximateSplitRequest.
        # Corresponds to the JSON property `progress`
        # @return [Google::Apis::DataflowV1b3::ApproximateProgress]
        attr_accessor :progress
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @work_item_id = args[:work_item_id] if args.key?(:work_item_id)
          @report_index = args[:report_index] if args.key?(:report_index)
          @requested_lease_duration = args[:requested_lease_duration] if args.key?(:requested_lease_duration)
          @completed = args[:completed] if args.key?(:completed)
          @errors = args[:errors] if args.key?(:errors)
          @counter_updates = args[:counter_updates] if args.key?(:counter_updates)
          @metric_updates = args[:metric_updates] if args.key?(:metric_updates)
          @reported_progress = args[:reported_progress] if args.key?(:reported_progress)
          @stop_position = args[:stop_position] if args.key?(:stop_position)
          @dynamic_source_split = args[:dynamic_source_split] if args.key?(:dynamic_source_split)
          @source_operation_response = args[:source_operation_response] if args.key?(:source_operation_response)
          @source_fork = args[:source_fork] if args.key?(:source_fork)
          @progress = args[:progress] if args.key?(:progress)
        end
      end
      
      # The `Status` type defines a logical error model that is suitable for different
      # programming environments, including REST APIs and RPC APIs. It is used by [
      # gRPC](https://github.com/grpc). The error model is designed to be: - Simple to
      # use and understand for most users - Flexible enough to meet unexpected needs #
      # Overview The `Status` message contains three pieces of data: error code, error
      # message, and error details. The error code should be an enum value of google.
      # rpc.Code, but it may accept additional error codes if needed. The error
      # message should be a developer-facing English message that helps developers *
      # understand* and *resolve* the error. If a localized user-facing error message
      # is needed, put the localized message in the error details or localize it in
      # the client. The optional error details may contain arbitrary information about
      # the error. There is a predefined set of error detail types in the package `
      # google.rpc` which can be used for common error conditions. # Language mapping
      # The `Status` message is the logical representation of the error model, but it
      # is not necessarily the actual wire format. When the `Status` message is
      # exposed in different client libraries and different wire protocols, it can be
      # mapped differently. For example, it will likely be mapped to some exceptions
      # in Java, but more likely mapped to some error codes in C. # Other uses The
      # error model and the `Status` message can be used in a variety of environments,
      # either with or without APIs, to provide a consistent developer experience
      # across different environments. Example uses of this error model include: -
      # Partial errors. If a service needs to return partial errors to the client, it
      # may embed the `Status` in the normal response to indicate the partial errors. -
      # Workflow errors. A typical workflow has multiple steps. Each step may have a `
      # Status` message for error reporting purpose. - Batch operations. If a client
      # uses batch request and batch response, the `Status` message should be used
      # directly inside batch response, one for each error sub-response. -
      # Asynchronous operations. If an API call embeds asynchronous operation results
      # in its response, the status of those operations should be represented directly
      # using the `Status` message. - Logging. If some API errors are stored in logs,
      # the message `Status` could be used directly after any stripping needed for
      # security/privacy reasons.
      class Status
        include Google::Apis::Core::Hashable
      
        # The status code, which should be an enum value of google.rpc.Code.
        # Corresponds to the JSON property `code`
        # @return [Fixnum]
        attr_accessor :code
      
        # A developer-facing error message, which should be in English. Any user-facing
        # error message should be localized and sent in the google.rpc.Status.details
        # field, or localized by the client.
        # Corresponds to the JSON property `message`
        # @return [String]
        attr_accessor :message
      
        # A list of messages that carry the error details. There will be a common set of
        # message types for APIs to use.
        # Corresponds to the JSON property `details`
        # @return [Array<Hash<String,Object>>]
        attr_accessor :details
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @code = args[:code] if args.key?(:code)
          @message = args[:message] if args.key?(:message)
          @details = args[:details] if args.key?(:details)
        end
      end
      
      # An update to a Counter sent from a worker.
      class CounterUpdate
        include Google::Apis::Core::Hashable
      
        # Basic metadata about a counter.
        # Corresponds to the JSON property `nameAndKind`
        # @return [Google::Apis::DataflowV1b3::NameAndKind]
        attr_accessor :name_and_kind
      
        # The service-generated short identifier for this counter. The short_id -> (name,
        # metadata) mapping is constant for the lifetime of a job.
        # Corresponds to the JSON property `shortId`
        # @return [String]
        attr_accessor :short_id
      
        # A single message which encapsulates structured name and metadata for a given
        # counter.
        # Corresponds to the JSON property `structuredNameAndMetadata`
        # @return [Google::Apis::DataflowV1b3::CounterStructuredNameAndMetadata]
        attr_accessor :structured_name_and_metadata
      
        # True if this counter is reported as the total cumulative aggregate value
        # accumulated since the worker started working on this WorkItem. By default this
        # is false, indicating that this counter is reported as a delta.
        # Corresponds to the JSON property `cumulative`
        # @return [Boolean]
        attr_accessor :cumulative
        alias_method :cumulative?, :cumulative
      
        # A representation of an int64, n, that is immune to precision loss when encoded
        # in JSON.
        # Corresponds to the JSON property `integer`
        # @return [Google::Apis::DataflowV1b3::SplitInt64]
        attr_accessor :integer
      
        # Floating point value for Sum, Max, Min.
        # Corresponds to the JSON property `floatingPoint`
        # @return [Float]
        attr_accessor :floating_point
      
        # Boolean value for And, Or.
        # Corresponds to the JSON property `boolean`
        # @return [Boolean]
        attr_accessor :boolean
        alias_method :boolean?, :boolean
      
        # A representation of an integer mean metric contribution.
        # Corresponds to the JSON property `integerMean`
        # @return [Google::Apis::DataflowV1b3::IntegerMean]
        attr_accessor :integer_mean
      
        # A representation of a floating point mean metric contribution.
        # Corresponds to the JSON property `floatingPointMean`
        # @return [Google::Apis::DataflowV1b3::FloatingPointMean]
        attr_accessor :floating_point_mean
      
        # A metric value representing a list of integers.
        # Corresponds to the JSON property `integerList`
        # @return [Google::Apis::DataflowV1b3::IntegerList]
        attr_accessor :integer_list
      
        # A metric value representing a list of floating point numbers.
        # Corresponds to the JSON property `floatingPointList`
        # @return [Google::Apis::DataflowV1b3::FloatingPointList]
        attr_accessor :floating_point_list
      
        # A metric value representing a list of strings.
        # Corresponds to the JSON property `stringList`
        # @return [Google::Apis::DataflowV1b3::StringList]
        attr_accessor :string_list
      
        # Value for internally-defined counters used by the Dataflow service.
        # Corresponds to the JSON property `internal`
        # @return [Object]
        attr_accessor :internal
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @name_and_kind = args[:name_and_kind] if args.key?(:name_and_kind)
          @short_id = args[:short_id] if args.key?(:short_id)
          @structured_name_and_metadata = args[:structured_name_and_metadata] if args.key?(:structured_name_and_metadata)
          @cumulative = args[:cumulative] if args.key?(:cumulative)
          @integer = args[:integer] if args.key?(:integer)
          @floating_point = args[:floating_point] if args.key?(:floating_point)
          @boolean = args[:boolean] if args.key?(:boolean)
          @integer_mean = args[:integer_mean] if args.key?(:integer_mean)
          @floating_point_mean = args[:floating_point_mean] if args.key?(:floating_point_mean)
          @integer_list = args[:integer_list] if args.key?(:integer_list)
          @floating_point_list = args[:floating_point_list] if args.key?(:floating_point_list)
          @string_list = args[:string_list] if args.key?(:string_list)
          @internal = args[:internal] if args.key?(:internal)
        end
      end
      
      # Basic metadata about a counter.
      class NameAndKind
        include Google::Apis::Core::Hashable
      
        # Name of the counter.
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # Counter aggregation kind.
        # Corresponds to the JSON property `kind`
        # @return [String]
        attr_accessor :kind
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @name = args[:name] if args.key?(:name)
          @kind = args[:kind] if args.key?(:kind)
        end
      end
      
      # A single message which encapsulates structured name and metadata for a given
      # counter.
      class CounterStructuredNameAndMetadata
        include Google::Apis::Core::Hashable
      
        # Identifies a counter within a per-job namespace. Counters whose structured
        # names are the same get merged into a single value for the job.
        # Corresponds to the JSON property `name`
        # @return [Google::Apis::DataflowV1b3::CounterStructuredName]
        attr_accessor :name
      
        # CounterMetadata includes all static non-name non-value counter attributes.
        # Corresponds to the JSON property `metadata`
        # @return [Google::Apis::DataflowV1b3::CounterMetadata]
        attr_accessor :metadata
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @name = args[:name] if args.key?(:name)
          @metadata = args[:metadata] if args.key?(:metadata)
        end
      end
      
      # Identifies a counter within a per-job namespace. Counters whose structured
      # names are the same get merged into a single value for the job.
      class CounterStructuredName
        include Google::Apis::Core::Hashable
      
        # Counter name. Not necessarily globally-unique, but unique within the context
        # of the other fields. Required.
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # One of the standard Origins defined above.
        # Corresponds to the JSON property `standardOrigin`
        # @return [String]
        attr_accessor :standard_origin
      
        # A string containing the origin of the counter.
        # Corresponds to the JSON property `otherOrigin`
        # @return [String]
        attr_accessor :other_origin
      
        # System generated name of the original step in the user's graph, before
        # optimization.
        # Corresponds to the JSON property `originalStepName`
        # @return [String]
        attr_accessor :original_step_name
      
        # Name of the optimized step being executed by the workers.
        # Corresponds to the JSON property `componentStepName`
        # @return [String]
        attr_accessor :component_step_name
      
        # Name of the stage. An execution step contains multiple component steps.
        # Corresponds to the JSON property `executionStepName`
        # @return [String]
        attr_accessor :execution_step_name
      
        # ID of a particular worker.
        # Corresponds to the JSON property `workerId`
        # @return [String]
        attr_accessor :worker_id
      
        # Portion of this counter, either key or value.
        # Corresponds to the JSON property `portion`
        # @return [String]
        attr_accessor :portion
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @name = args[:name] if args.key?(:name)
          @standard_origin = args[:standard_origin] if args.key?(:standard_origin)
          @other_origin = args[:other_origin] if args.key?(:other_origin)
          @original_step_name = args[:original_step_name] if args.key?(:original_step_name)
          @component_step_name = args[:component_step_name] if args.key?(:component_step_name)
          @execution_step_name = args[:execution_step_name] if args.key?(:execution_step_name)
          @worker_id = args[:worker_id] if args.key?(:worker_id)
          @portion = args[:portion] if args.key?(:portion)
        end
      end
      
      # CounterMetadata includes all static non-name non-value counter attributes.
      class CounterMetadata
        include Google::Apis::Core::Hashable
      
        # Counter aggregation kind.
        # Corresponds to the JSON property `kind`
        # @return [String]
        attr_accessor :kind
      
        # Human-readable description of the counter semantics.
        # Corresponds to the JSON property `description`
        # @return [String]
        attr_accessor :description
      
        # System defined Units, see above enum.
        # Corresponds to the JSON property `standardUnits`
        # @return [String]
        attr_accessor :standard_units
      
        # A string referring to the unit type.
        # Corresponds to the JSON property `otherUnits`
        # @return [String]
        attr_accessor :other_units
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @kind = args[:kind] if args.key?(:kind)
          @description = args[:description] if args.key?(:description)
          @standard_units = args[:standard_units] if args.key?(:standard_units)
          @other_units = args[:other_units] if args.key?(:other_units)
        end
      end
      
      # A representation of an int64, n, that is immune to precision loss when encoded
      # in JSON.
      class SplitInt64
        include Google::Apis::Core::Hashable
      
        # The low order bits: n & 0xffffffff.
        # Corresponds to the JSON property `lowBits`
        # @return [Fixnum]
        attr_accessor :low_bits
      
        # The high order bits, including the sign: n >> 32.
        # Corresponds to the JSON property `highBits`
        # @return [Fixnum]
        attr_accessor :high_bits
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @low_bits = args[:low_bits] if args.key?(:low_bits)
          @high_bits = args[:high_bits] if args.key?(:high_bits)
        end
      end
      
      # A representation of an integer mean metric contribution.
      class IntegerMean
        include Google::Apis::Core::Hashable
      
        # A representation of an int64, n, that is immune to precision loss when encoded
        # in JSON.
        # Corresponds to the JSON property `sum`
        # @return [Google::Apis::DataflowV1b3::SplitInt64]
        attr_accessor :sum
      
        # A representation of an int64, n, that is immune to precision loss when encoded
        # in JSON.
        # Corresponds to the JSON property `count`
        # @return [Google::Apis::DataflowV1b3::SplitInt64]
        attr_accessor :count
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @sum = args[:sum] if args.key?(:sum)
          @count = args[:count] if args.key?(:count)
        end
      end
      
      # A representation of a floating point mean metric contribution.
      class FloatingPointMean
        include Google::Apis::Core::Hashable
      
        # The sum of all values being aggregated.
        # Corresponds to the JSON property `sum`
        # @return [Float]
        attr_accessor :sum
      
        # A representation of an int64, n, that is immune to precision loss when encoded
        # in JSON.
        # Corresponds to the JSON property `count`
        # @return [Google::Apis::DataflowV1b3::SplitInt64]
        attr_accessor :count
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @sum = args[:sum] if args.key?(:sum)
          @count = args[:count] if args.key?(:count)
        end
      end
      
      # A metric value representing a list of integers.
      class IntegerList
        include Google::Apis::Core::Hashable
      
        # Elements of the list.
        # Corresponds to the JSON property `elements`
        # @return [Array<Google::Apis::DataflowV1b3::SplitInt64>]
        attr_accessor :elements
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @elements = args[:elements] if args.key?(:elements)
        end
      end
      
      # A metric value representing a list of floating point numbers.
      class FloatingPointList
        include Google::Apis::Core::Hashable
      
        # Elements of the list.
        # Corresponds to the JSON property `elements`
        # @return [Array<Float>]
        attr_accessor :elements
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @elements = args[:elements] if args.key?(:elements)
        end
      end
      
      # A metric value representing a list of strings.
      class StringList
        include Google::Apis::Core::Hashable
      
        # Elements of the list.
        # Corresponds to the JSON property `elements`
        # @return [Array<String>]
        attr_accessor :elements
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @elements = args[:elements] if args.key?(:elements)
        end
      end
      
      # A progress measurement of a WorkItem by a worker.
      class ApproximateReportedProgress
        include Google::Apis::Core::Hashable
      
        # Position defines a position within a collection of data. The value can be
        # either the end position, a key (used with ordered collections), a byte offset,
        # or a record index.
        # Corresponds to the JSON property `position`
        # @return [Google::Apis::DataflowV1b3::Position]
        attr_accessor :position
      
        # Completion as fraction of the input consumed, from 0.0 (beginning, nothing
        # consumed), to 1.0 (end of the input, entire input consumed).
        # Corresponds to the JSON property `fractionConsumed`
        # @return [Float]
        attr_accessor :fraction_consumed
      
        # Represents the level of parallelism in a WorkItem's input, reported by the
        # worker.
        # Corresponds to the JSON property `remainingParallelism`
        # @return [Google::Apis::DataflowV1b3::ReportedParallelism]
        attr_accessor :remaining_parallelism
      
        # Represents the level of parallelism in a WorkItem's input, reported by the
        # worker.
        # Corresponds to the JSON property `consumedParallelism`
        # @return [Google::Apis::DataflowV1b3::ReportedParallelism]
        attr_accessor :consumed_parallelism
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @position = args[:position] if args.key?(:position)
          @fraction_consumed = args[:fraction_consumed] if args.key?(:fraction_consumed)
          @remaining_parallelism = args[:remaining_parallelism] if args.key?(:remaining_parallelism)
          @consumed_parallelism = args[:consumed_parallelism] if args.key?(:consumed_parallelism)
        end
      end
      
      # Position defines a position within a collection of data. The value can be
      # either the end position, a key (used with ordered collections), a byte offset,
      # or a record index.
      class Position
        include Google::Apis::Core::Hashable
      
        # Position is past all other positions. Also useful for the end position of an
        # unbounded range.
        # Corresponds to the JSON property `end`
        # @return [Boolean]
        attr_accessor :end
        alias_method :end?, :end
      
        # Position is a string key, ordered lexicographically.
        # Corresponds to the JSON property `key`
        # @return [String]
        attr_accessor :key
      
        # Position is a byte offset.
        # Corresponds to the JSON property `byteOffset`
        # @return [String]
        attr_accessor :byte_offset
      
        # Position is a record index.
        # Corresponds to the JSON property `recordIndex`
        # @return [String]
        attr_accessor :record_index
      
        # CloudPosition is a base64 encoded BatchShufflePosition (with FIXED sharding).
        # Corresponds to the JSON property `shufflePosition`
        # @return [String]
        attr_accessor :shuffle_position
      
        # A position that encapsulates an inner position and an index for the inner
        # position. A ConcatPosition can be used by a reader of a source that
        # encapsulates a set of other sources.
        # Corresponds to the JSON property `concatPosition`
        # @return [Google::Apis::DataflowV1b3::ConcatPosition]
        attr_accessor :concat_position
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @end = args[:end] if args.key?(:end)
          @key = args[:key] if args.key?(:key)
          @byte_offset = args[:byte_offset] if args.key?(:byte_offset)
          @record_index = args[:record_index] if args.key?(:record_index)
          @shuffle_position = args[:shuffle_position] if args.key?(:shuffle_position)
          @concat_position = args[:concat_position] if args.key?(:concat_position)
        end
      end
      
      # A position that encapsulates an inner position and an index for the inner
      # position. A ConcatPosition can be used by a reader of a source that
      # encapsulates a set of other sources.
      class ConcatPosition
        include Google::Apis::Core::Hashable
      
        # Index of the inner source.
        # Corresponds to the JSON property `index`
        # @return [Fixnum]
        attr_accessor :index
      
        # Position defines a position within a collection of data. The value can be
        # either the end position, a key (used with ordered collections), a byte offset,
        # or a record index.
        # Corresponds to the JSON property `position`
        # @return [Google::Apis::DataflowV1b3::Position]
        attr_accessor :position
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @index = args[:index] if args.key?(:index)
          @position = args[:position] if args.key?(:position)
        end
      end
      
      # Represents the level of parallelism in a WorkItem's input, reported by the
      # worker.
      class ReportedParallelism
        include Google::Apis::Core::Hashable
      
        # Specifies whether the parallelism is infinite. If true, "value" is ignored.
        # Infinite parallelism means the service will assume that the work item can
        # always be split into more non-empty work items by dynamic splitting. This is a
        # work-around for lack of support for infinity by the current JSON-based Java
        # RPC stack.
        # Corresponds to the JSON property `isInfinite`
        # @return [Boolean]
        attr_accessor :is_infinite
        alias_method :is_infinite?, :is_infinite
      
        # Specifies the level of parallelism in case it is finite.
        # Corresponds to the JSON property `value`
        # @return [Float]
        attr_accessor :value
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @is_infinite = args[:is_infinite] if args.key?(:is_infinite)
          @value = args[:value] if args.key?(:value)
        end
      end
      
      # When a task splits using WorkItemStatus.dynamic_source_split, this message
      # describes the two parts of the split relative to the description of the
      # current task's input.
      class DynamicSourceSplit
        include Google::Apis::Core::Hashable
      
        # Specification of one of the bundles produced as a result of splitting a Source
        # (e.g. when executing a SourceSplitRequest, or when splitting an active task
        # using WorkItemStatus.dynamic_source_split), relative to the source being split.
        # Corresponds to the JSON property `primary`
        # @return [Google::Apis::DataflowV1b3::DerivedSource]
        attr_accessor :primary
      
        # Specification of one of the bundles produced as a result of splitting a Source
        # (e.g. when executing a SourceSplitRequest, or when splitting an active task
        # using WorkItemStatus.dynamic_source_split), relative to the source being split.
        # Corresponds to the JSON property `residual`
        # @return [Google::Apis::DataflowV1b3::DerivedSource]
        attr_accessor :residual
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @primary = args[:primary] if args.key?(:primary)
          @residual = args[:residual] if args.key?(:residual)
        end
      end
      
      # Specification of one of the bundles produced as a result of splitting a Source
      # (e.g. when executing a SourceSplitRequest, or when splitting an active task
      # using WorkItemStatus.dynamic_source_split), relative to the source being split.
      class DerivedSource
        include Google::Apis::Core::Hashable
      
        # A source that records can be read and decoded from.
        # Corresponds to the JSON property `source`
        # @return [Google::Apis::DataflowV1b3::Source]
        attr_accessor :source
      
        # What source to base the produced source on (if any).
        # Corresponds to the JSON property `derivationMode`
        # @return [String]
        attr_accessor :derivation_mode
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @source = args[:source] if args.key?(:source)
          @derivation_mode = args[:derivation_mode] if args.key?(:derivation_mode)
        end
      end
      
      # A source that records can be read and decoded from.
      class Source
        include Google::Apis::Core::Hashable
      
        # The source to read from, plus its parameters.
        # Corresponds to the JSON property `spec`
        # @return [Hash<String,Object>]
        attr_accessor :spec
      
        # The codec to use to decode data read from the source.
        # Corresponds to the JSON property `codec`
        # @return [Hash<String,Object>]
        attr_accessor :codec
      
        # While splitting, sources may specify the produced bundles as differences
        # against another source, in order to save backend-side memory and allow bigger
        # jobs. For details, see SourceSplitRequest. To support this use case, the full
        # set of parameters of the source is logically obtained by taking the latest
        # explicitly specified value of each parameter in the order: base_specs (later
        # items win), spec (overrides anything in base_specs).
        # Corresponds to the JSON property `baseSpecs`
        # @return [Array<Hash<String,Object>>]
        attr_accessor :base_specs
      
        # Metadata about a Source useful for automatically optimizing and tuning the
        # pipeline, etc.
        # Corresponds to the JSON property `metadata`
        # @return [Google::Apis::DataflowV1b3::SourceMetadata]
        attr_accessor :metadata
      
        # Setting this value to true hints to the framework that the source doesn't need
        # splitting, and using SourceSplitRequest on it would yield
        # SOURCE_SPLIT_OUTCOME_USE_CURRENT. E.g. a file splitter may set this to true
        # when splitting a single file into a set of byte ranges of appropriate size,
        # and set this to false when splitting a filepattern into individual files.
        # However, for efficiency, a file splitter may decide to produce file subranges
        # directly from the filepattern to avoid a splitting round-trip. See
        # SourceSplitRequest for an overview of the splitting process. This field is
        # meaningful only in the Source objects populated by the user (e.g. when filling
        # in a DerivedSource). Source objects supplied by the framework to the user don'
        # t have this field populated.
        # Corresponds to the JSON property `doesNotNeedSplitting`
        # @return [Boolean]
        attr_accessor :does_not_need_splitting
        alias_method :does_not_need_splitting?, :does_not_need_splitting
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @spec = args[:spec] if args.key?(:spec)
          @codec = args[:codec] if args.key?(:codec)
          @base_specs = args[:base_specs] if args.key?(:base_specs)
          @metadata = args[:metadata] if args.key?(:metadata)
          @does_not_need_splitting = args[:does_not_need_splitting] if args.key?(:does_not_need_splitting)
        end
      end
      
      # Metadata about a Source useful for automatically optimizing and tuning the
      # pipeline, etc.
      class SourceMetadata
        include Google::Apis::Core::Hashable
      
        # Whether this source is known to produce key/value pairs with the (encoded)
        # keys in lexicographically sorted order.
        # Corresponds to the JSON property `producesSortedKeys`
        # @return [Boolean]
        attr_accessor :produces_sorted_keys
        alias_method :produces_sorted_keys?, :produces_sorted_keys
      
        # Specifies that the size of this source is known to be infinite (this is a
        # streaming source).
        # Corresponds to the JSON property `infinite`
        # @return [Boolean]
        attr_accessor :infinite
        alias_method :infinite?, :infinite
      
        # An estimate of the total size (in bytes) of the data that would be read from
        # this source. This estimate is in terms of external storage size, before any
        # decompression or other processing done by the reader.
        # Corresponds to the JSON property `estimatedSizeBytes`
        # @return [String]
        attr_accessor :estimated_size_bytes
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @produces_sorted_keys = args[:produces_sorted_keys] if args.key?(:produces_sorted_keys)
          @infinite = args[:infinite] if args.key?(:infinite)
          @estimated_size_bytes = args[:estimated_size_bytes] if args.key?(:estimated_size_bytes)
        end
      end
      
      # The result of a SourceOperationRequest, specified in
      # ReportWorkItemStatusRequest.source_operation when the work item is completed.
      class SourceOperationResponse
        include Google::Apis::Core::Hashable
      
        # The response to a SourceSplitRequest.
        # Corresponds to the JSON property `split`
        # @return [Google::Apis::DataflowV1b3::SourceSplitResponse]
        attr_accessor :split
      
        # The result of a SourceGetMetadataOperation.
        # Corresponds to the JSON property `getMetadata`
        # @return [Google::Apis::DataflowV1b3::SourceGetMetadataResponse]
        attr_accessor :get_metadata
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @split = args[:split] if args.key?(:split)
          @get_metadata = args[:get_metadata] if args.key?(:get_metadata)
        end
      end
      
      # The response to a SourceSplitRequest.
      class SourceSplitResponse
        include Google::Apis::Core::Hashable
      
        # Indicates whether splitting happened and produced a list of bundles. If this
        # is USE_CURRENT_SOURCE_AS_IS, the current source should be processed "as is"
        # without splitting. "bundles" is ignored in this case. If this is
        # SPLITTING_HAPPENED, then "bundles" contains a list of bundles into which the
        # source was split.
        # Corresponds to the JSON property `outcome`
        # @return [String]
        attr_accessor :outcome
      
        # If outcome is SPLITTING_HAPPENED, then this is a list of bundles into which
        # the source was split. Otherwise this field is ignored. This list can be empty,
        # which means the source represents an empty input.
        # Corresponds to the JSON property `bundles`
        # @return [Array<Google::Apis::DataflowV1b3::DerivedSource>]
        attr_accessor :bundles
      
        # DEPRECATED in favor of bundles.
        # Corresponds to the JSON property `shards`
        # @return [Array<Google::Apis::DataflowV1b3::SourceSplitShard>]
        attr_accessor :shards
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @outcome = args[:outcome] if args.key?(:outcome)
          @bundles = args[:bundles] if args.key?(:bundles)
          @shards = args[:shards] if args.key?(:shards)
        end
      end
      
      # DEPRECATED in favor of DerivedSource.
      class SourceSplitShard
        include Google::Apis::Core::Hashable
      
        # A source that records can be read and decoded from.
        # Corresponds to the JSON property `source`
        # @return [Google::Apis::DataflowV1b3::Source]
        attr_accessor :source
      
        # DEPRECATED
        # Corresponds to the JSON property `derivationMode`
        # @return [String]
        attr_accessor :derivation_mode
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @source = args[:source] if args.key?(:source)
          @derivation_mode = args[:derivation_mode] if args.key?(:derivation_mode)
        end
      end
      
      # The result of a SourceGetMetadataOperation.
      class SourceGetMetadataResponse
        include Google::Apis::Core::Hashable
      
        # Metadata about a Source useful for automatically optimizing and tuning the
        # pipeline, etc.
        # Corresponds to the JSON property `metadata`
        # @return [Google::Apis::DataflowV1b3::SourceMetadata]
        attr_accessor :metadata
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @metadata = args[:metadata] if args.key?(:metadata)
        end
      end
      
      # DEPRECATED in favor of DynamicSourceSplit.
      class SourceFork
        include Google::Apis::Core::Hashable
      
        # DEPRECATED in favor of DerivedSource.
        # Corresponds to the JSON property `primary`
        # @return [Google::Apis::DataflowV1b3::SourceSplitShard]
        attr_accessor :primary
      
        # DEPRECATED in favor of DerivedSource.
        # Corresponds to the JSON property `residual`
        # @return [Google::Apis::DataflowV1b3::SourceSplitShard]
        attr_accessor :residual
      
        # Specification of one of the bundles produced as a result of splitting a Source
        # (e.g. when executing a SourceSplitRequest, or when splitting an active task
        # using WorkItemStatus.dynamic_source_split), relative to the source being split.
        # Corresponds to the JSON property `primarySource`
        # @return [Google::Apis::DataflowV1b3::DerivedSource]
        attr_accessor :primary_source
      
        # Specification of one of the bundles produced as a result of splitting a Source
        # (e.g. when executing a SourceSplitRequest, or when splitting an active task
        # using WorkItemStatus.dynamic_source_split), relative to the source being split.
        # Corresponds to the JSON property `residualSource`
        # @return [Google::Apis::DataflowV1b3::DerivedSource]
        attr_accessor :residual_source
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @primary = args[:primary] if args.key?(:primary)
          @residual = args[:residual] if args.key?(:residual)
          @primary_source = args[:primary_source] if args.key?(:primary_source)
          @residual_source = args[:residual_source] if args.key?(:residual_source)
        end
      end
      
      # Obsolete in favor of ApproximateReportedProgress and ApproximateSplitRequest.
      class ApproximateProgress
        include Google::Apis::Core::Hashable
      
        # Position defines a position within a collection of data. The value can be
        # either the end position, a key (used with ordered collections), a byte offset,
        # or a record index.
        # Corresponds to the JSON property `position`
        # @return [Google::Apis::DataflowV1b3::Position]
        attr_accessor :position
      
        # Obsolete.
        # Corresponds to the JSON property `percentComplete`
        # @return [Float]
        attr_accessor :percent_complete
      
        # Obsolete.
        # Corresponds to the JSON property `remainingTime`
        # @return [String]
        attr_accessor :remaining_time
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @position = args[:position] if args.key?(:position)
          @percent_complete = args[:percent_complete] if args.key?(:percent_complete)
          @remaining_time = args[:remaining_time] if args.key?(:remaining_time)
        end
      end
      
      # Response from a request to report the status of WorkItems.
      class ReportWorkItemStatusResponse
        include Google::Apis::Core::Hashable
      
        # A set of messages indicating the service-side state for each WorkItem whose
        # status was reported, in the same order as the WorkItemStatus messages in the
        # ReportWorkItemStatusRequest which resulting in this response.
        # Corresponds to the JSON property `workItemServiceStates`
        # @return [Array<Google::Apis::DataflowV1b3::WorkItemServiceState>]
        attr_accessor :work_item_service_states
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @work_item_service_states = args[:work_item_service_states] if args.key?(:work_item_service_states)
        end
      end
      
      # The Dataflow service's idea of the current state of a WorkItem being processed
      # by a worker.
      class WorkItemServiceState
        include Google::Apis::Core::Hashable
      
        # A suggestion by the service to the worker to dynamically split the WorkItem.
        # Corresponds to the JSON property `splitRequest`
        # @return [Google::Apis::DataflowV1b3::ApproximateSplitRequest]
        attr_accessor :split_request
      
        # Time at which the current lease will expire.
        # Corresponds to the JSON property `leaseExpireTime`
        # @return [String]
        attr_accessor :lease_expire_time
      
        # New recommended reporting interval.
        # Corresponds to the JSON property `reportStatusInterval`
        # @return [String]
        attr_accessor :report_status_interval
      
        # Other data returned by the service, specific to the particular worker harness.
        # Corresponds to the JSON property `harnessData`
        # @return [Hash<String,Object>]
        attr_accessor :harness_data
      
        # The index value to use for the next report sent by the worker. Note: If the
        # report call fails for whatever reason, the worker should reuse this index for
        # subsequent report attempts.
        # Corresponds to the JSON property `nextReportIndex`
        # @return [String]
        attr_accessor :next_report_index
      
        # The short ids that workers should use in subsequent metric updates. Workers
        # should strive to use short ids whenever possible, but it is ok to request the
        # short_id again if a worker lost track of it (e.g. if the worker is recovering
        # from a crash). NOTE: it is possible that the response may have short ids for a
        # subset of the metrics.
        # Corresponds to the JSON property `metricShortId`
        # @return [Array<Google::Apis::DataflowV1b3::MetricShortId>]
        attr_accessor :metric_short_id
      
        # Position defines a position within a collection of data. The value can be
        # either the end position, a key (used with ordered collections), a byte offset,
        # or a record index.
        # Corresponds to the JSON property `suggestedStopPosition`
        # @return [Google::Apis::DataflowV1b3::Position]
        attr_accessor :suggested_stop_position
      
        # Obsolete in favor of ApproximateReportedProgress and ApproximateSplitRequest.
        # Corresponds to the JSON property `suggestedStopPoint`
        # @return [Google::Apis::DataflowV1b3::ApproximateProgress]
        attr_accessor :suggested_stop_point
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @split_request = args[:split_request] if args.key?(:split_request)
          @lease_expire_time = args[:lease_expire_time] if args.key?(:lease_expire_time)
          @report_status_interval = args[:report_status_interval] if args.key?(:report_status_interval)
          @harness_data = args[:harness_data] if args.key?(:harness_data)
          @next_report_index = args[:next_report_index] if args.key?(:next_report_index)
          @metric_short_id = args[:metric_short_id] if args.key?(:metric_short_id)
          @suggested_stop_position = args[:suggested_stop_position] if args.key?(:suggested_stop_position)
          @suggested_stop_point = args[:suggested_stop_point] if args.key?(:suggested_stop_point)
        end
      end
      
      # A suggestion by the service to the worker to dynamically split the WorkItem.
      class ApproximateSplitRequest
        include Google::Apis::Core::Hashable
      
        # Position defines a position within a collection of data. The value can be
        # either the end position, a key (used with ordered collections), a byte offset,
        # or a record index.
        # Corresponds to the JSON property `position`
        # @return [Google::Apis::DataflowV1b3::Position]
        attr_accessor :position
      
        # A fraction at which to split the work item, from 0.0 (beginning of the input)
        # to 1.0 (end of the input).
        # Corresponds to the JSON property `fractionConsumed`
        # @return [Float]
        attr_accessor :fraction_consumed
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @position = args[:position] if args.key?(:position)
          @fraction_consumed = args[:fraction_consumed] if args.key?(:fraction_consumed)
        end
      end
      
      # The metric short id is returned to the user alongside an offset into
      # ReportWorkItemStatusRequest
      class MetricShortId
        include Google::Apis::Core::Hashable
      
        # The index of the corresponding metric in the ReportWorkItemStatusRequest.
        # Required.
        # Corresponds to the JSON property `metricIndex`
        # @return [Fixnum]
        attr_accessor :metric_index
      
        # The service-generated short identifier for the metric.
        # Corresponds to the JSON property `shortId`
        # @return [String]
        attr_accessor :short_id
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @metric_index = args[:metric_index] if args.key?(:metric_index)
          @short_id = args[:short_id] if args.key?(:short_id)
        end
      end
      
      # Request to lease WorkItems.
      class LeaseWorkItemRequest
        include Google::Apis::Core::Hashable
      
        # Filter for WorkItem type.
        # Corresponds to the JSON property `workItemTypes`
        # @return [Array<String>]
        attr_accessor :work_item_types
      
        # Worker capabilities. WorkItems might be limited to workers with specific
        # capabilities.
        # Corresponds to the JSON property `workerCapabilities`
        # @return [Array<String>]
        attr_accessor :worker_capabilities
      
        # The initial lease period.
        # Corresponds to the JSON property `requestedLeaseDuration`
        # @return [String]
        attr_accessor :requested_lease_duration
      
        # The current timestamp at the worker.
        # Corresponds to the JSON property `currentWorkerTime`
        # @return [String]
        attr_accessor :current_worker_time
      
        # Identifies the worker leasing work -- typically the ID of the virtual machine
        # running the worker.
        # Corresponds to the JSON property `workerId`
        # @return [String]
        attr_accessor :worker_id
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @work_item_types = args[:work_item_types] if args.key?(:work_item_types)
          @worker_capabilities = args[:worker_capabilities] if args.key?(:worker_capabilities)
          @requested_lease_duration = args[:requested_lease_duration] if args.key?(:requested_lease_duration)
          @current_worker_time = args[:current_worker_time] if args.key?(:current_worker_time)
          @worker_id = args[:worker_id] if args.key?(:worker_id)
        end
      end
      
      # Response to a request to lease WorkItems.
      class LeaseWorkItemResponse
        include Google::Apis::Core::Hashable
      
        # A list of the leased WorkItems.
        # Corresponds to the JSON property `workItems`
        # @return [Array<Google::Apis::DataflowV1b3::WorkItem>]
        attr_accessor :work_items
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @work_items = args[:work_items] if args.key?(:work_items)
        end
      end
      
      # WorkItem represents basic information about a WorkItem to be executed in the
      # cloud.
      class WorkItem
        include Google::Apis::Core::Hashable
      
        # Identifies this WorkItem.
        # Corresponds to the JSON property `id`
        # @return [String]
        attr_accessor :id
      
        # Identifies the cloud project this WorkItem belongs to.
        # Corresponds to the JSON property `projectId`
        # @return [String]
        attr_accessor :project_id
      
        # Identifies the workflow job this WorkItem belongs to.
        # Corresponds to the JSON property `jobId`
        # @return [String]
        attr_accessor :job_id
      
        # Any required packages that need to be fetched in order to execute this
        # WorkItem.
        # Corresponds to the JSON property `packages`
        # @return [Array<Google::Apis::DataflowV1b3::Package>]
        attr_accessor :packages
      
        # MapTask consists of an ordered set of instructions, each of which describes
        # one particular low-level operation for the worker to perform in order to
        # accomplish the MapTask's WorkItem. Each instruction must appear in the list
        # before any instructions which depends on its output.
        # Corresponds to the JSON property `mapTask`
        # @return [Google::Apis::DataflowV1b3::MapTask]
        attr_accessor :map_task
      
        # Describes a particular function to invoke.
        # Corresponds to the JSON property `seqMapTask`
        # @return [Google::Apis::DataflowV1b3::SeqMapTask]
        attr_accessor :seq_map_task
      
        # A task which consists of a shell command for the worker to execute.
        # Corresponds to the JSON property `shellTask`
        # @return [Google::Apis::DataflowV1b3::ShellTask]
        attr_accessor :shell_task
      
        # A task which initializes part of a streaming Dataflow job.
        # Corresponds to the JSON property `streamingSetupTask`
        # @return [Google::Apis::DataflowV1b3::StreamingSetupTask]
        attr_accessor :streaming_setup_task
      
        # A work item that represents the different operations that can be performed on
        # a user-defined Source specification.
        # Corresponds to the JSON property `sourceOperationTask`
        # @return [Google::Apis::DataflowV1b3::SourceOperationRequest]
        attr_accessor :source_operation_task
      
        # A task which describes what action should be performed for the specified
        # streaming computation ranges.
        # Corresponds to the JSON property `streamingComputationTask`
        # @return [Google::Apis::DataflowV1b3::StreamingComputationTask]
        attr_accessor :streaming_computation_task
      
        # A task that carries configuration information for streaming computations.
        # Corresponds to the JSON property `streamingConfigTask`
        # @return [Google::Apis::DataflowV1b3::StreamingConfigTask]
        attr_accessor :streaming_config_task
      
        # Recommended reporting interval.
        # Corresponds to the JSON property `reportStatusInterval`
        # @return [String]
        attr_accessor :report_status_interval
      
        # Time when the lease on this Work will expire.
        # Corresponds to the JSON property `leaseExpireTime`
        # @return [String]
        attr_accessor :lease_expire_time
      
        # Work item-specific configuration as an opaque blob.
        # Corresponds to the JSON property `configuration`
        # @return [String]
        attr_accessor :configuration
      
        # The initial index to use when reporting the status of the WorkItem.
        # Corresponds to the JSON property `initialReportIndex`
        # @return [String]
        attr_accessor :initial_report_index
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @id = args[:id] if args.key?(:id)
          @project_id = args[:project_id] if args.key?(:project_id)
          @job_id = args[:job_id] if args.key?(:job_id)
          @packages = args[:packages] if args.key?(:packages)
          @map_task = args[:map_task] if args.key?(:map_task)
          @seq_map_task = args[:seq_map_task] if args.key?(:seq_map_task)
          @shell_task = args[:shell_task] if args.key?(:shell_task)
          @streaming_setup_task = args[:streaming_setup_task] if args.key?(:streaming_setup_task)
          @source_operation_task = args[:source_operation_task] if args.key?(:source_operation_task)
          @streaming_computation_task = args[:streaming_computation_task] if args.key?(:streaming_computation_task)
          @streaming_config_task = args[:streaming_config_task] if args.key?(:streaming_config_task)
          @report_status_interval = args[:report_status_interval] if args.key?(:report_status_interval)
          @lease_expire_time = args[:lease_expire_time] if args.key?(:lease_expire_time)
          @configuration = args[:configuration] if args.key?(:configuration)
          @initial_report_index = args[:initial_report_index] if args.key?(:initial_report_index)
        end
      end
      
      # MapTask consists of an ordered set of instructions, each of which describes
      # one particular low-level operation for the worker to perform in order to
      # accomplish the MapTask's WorkItem. Each instruction must appear in the list
      # before any instructions which depends on its output.
      class MapTask
        include Google::Apis::Core::Hashable
      
        # The instructions in the MapTask.
        # Corresponds to the JSON property `instructions`
        # @return [Array<Google::Apis::DataflowV1b3::ParallelInstruction>]
        attr_accessor :instructions
      
        # System-defined name of this MapTask. Unique across the workflow.
        # Corresponds to the JSON property `systemName`
        # @return [String]
        attr_accessor :system_name
      
        # System-defined name of the stage containing this MapTask. Unique across the
        # workflow.
        # Corresponds to the JSON property `stageName`
        # @return [String]
        attr_accessor :stage_name
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @instructions = args[:instructions] if args.key?(:instructions)
          @system_name = args[:system_name] if args.key?(:system_name)
          @stage_name = args[:stage_name] if args.key?(:stage_name)
        end
      end
      
      # Describes a particular operation comprising a MapTask.
      class ParallelInstruction
        include Google::Apis::Core::Hashable
      
        # System-defined name of this operation. Unique across the workflow.
        # Corresponds to the JSON property `systemName`
        # @return [String]
        attr_accessor :system_name
      
        # User-provided name of this operation.
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # System-defined name for the operation in the original workflow graph.
        # Corresponds to the JSON property `originalName`
        # @return [String]
        attr_accessor :original_name
      
        # An instruction that reads records. Takes no inputs, produces one output.
        # Corresponds to the JSON property `read`
        # @return [Google::Apis::DataflowV1b3::ReadInstruction]
        attr_accessor :read
      
        # An instruction that writes records. Takes one input, produces no outputs.
        # Corresponds to the JSON property `write`
        # @return [Google::Apis::DataflowV1b3::WriteInstruction]
        attr_accessor :write
      
        # An instruction that does a ParDo operation. Takes one main input and zero or
        # more side inputs, and produces zero or more outputs. Runs user code.
        # Corresponds to the JSON property `parDo`
        # @return [Google::Apis::DataflowV1b3::ParDoInstruction]
        attr_accessor :par_do
      
        # An instruction that does a partial group-by-key. One input and one output.
        # Corresponds to the JSON property `partialGroupByKey`
        # @return [Google::Apis::DataflowV1b3::PartialGroupByKeyInstruction]
        attr_accessor :partial_group_by_key
      
        # An instruction that copies its inputs (zero or more) to its (single) output.
        # Corresponds to the JSON property `flatten`
        # @return [Google::Apis::DataflowV1b3::FlattenInstruction]
        attr_accessor :flatten
      
        # Describes the outputs of the instruction.
        # Corresponds to the JSON property `outputs`
        # @return [Array<Google::Apis::DataflowV1b3::InstructionOutput>]
        attr_accessor :outputs
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @system_name = args[:system_name] if args.key?(:system_name)
          @name = args[:name] if args.key?(:name)
          @original_name = args[:original_name] if args.key?(:original_name)
          @read = args[:read] if args.key?(:read)
          @write = args[:write] if args.key?(:write)
          @par_do = args[:par_do] if args.key?(:par_do)
          @partial_group_by_key = args[:partial_group_by_key] if args.key?(:partial_group_by_key)
          @flatten = args[:flatten] if args.key?(:flatten)
          @outputs = args[:outputs] if args.key?(:outputs)
        end
      end
      
      # An instruction that reads records. Takes no inputs, produces one output.
      class ReadInstruction
        include Google::Apis::Core::Hashable
      
        # A source that records can be read and decoded from.
        # Corresponds to the JSON property `source`
        # @return [Google::Apis::DataflowV1b3::Source]
        attr_accessor :source
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @source = args[:source] if args.key?(:source)
        end
      end
      
      # An instruction that writes records. Takes one input, produces no outputs.
      class WriteInstruction
        include Google::Apis::Core::Hashable
      
        # An input of an instruction, as a reference to an output of a producer
        # instruction.
        # Corresponds to the JSON property `input`
        # @return [Google::Apis::DataflowV1b3::InstructionInput]
        attr_accessor :input
      
        # A sink that records can be encoded and written to.
        # Corresponds to the JSON property `sink`
        # @return [Google::Apis::DataflowV1b3::Sink]
        attr_accessor :sink
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @input = args[:input] if args.key?(:input)
          @sink = args[:sink] if args.key?(:sink)
        end
      end
      
      # An input of an instruction, as a reference to an output of a producer
      # instruction.
      class InstructionInput
        include Google::Apis::Core::Hashable
      
        # The index (origin zero) of the parallel instruction that produces the output
        # to be consumed by this input. This index is relative to the list of
        # instructions in this input's instruction's containing MapTask.
        # Corresponds to the JSON property `producerInstructionIndex`
        # @return [Fixnum]
        attr_accessor :producer_instruction_index
      
        # The output index (origin zero) within the producer.
        # Corresponds to the JSON property `outputNum`
        # @return [Fixnum]
        attr_accessor :output_num
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @producer_instruction_index = args[:producer_instruction_index] if args.key?(:producer_instruction_index)
          @output_num = args[:output_num] if args.key?(:output_num)
        end
      end
      
      # A sink that records can be encoded and written to.
      class Sink
        include Google::Apis::Core::Hashable
      
        # The sink to write to, plus its parameters.
        # Corresponds to the JSON property `spec`
        # @return [Hash<String,Object>]
        attr_accessor :spec
      
        # The codec to use to encode data written to the sink.
        # Corresponds to the JSON property `codec`
        # @return [Hash<String,Object>]
        attr_accessor :codec
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @spec = args[:spec] if args.key?(:spec)
          @codec = args[:codec] if args.key?(:codec)
        end
      end
      
      # An instruction that does a ParDo operation. Takes one main input and zero or
      # more side inputs, and produces zero or more outputs. Runs user code.
      class ParDoInstruction
        include Google::Apis::Core::Hashable
      
        # An input of an instruction, as a reference to an output of a producer
        # instruction.
        # Corresponds to the JSON property `input`
        # @return [Google::Apis::DataflowV1b3::InstructionInput]
        attr_accessor :input
      
        # Zero or more side inputs.
        # Corresponds to the JSON property `sideInputs`
        # @return [Array<Google::Apis::DataflowV1b3::SideInputInfo>]
        attr_accessor :side_inputs
      
        # The user function to invoke.
        # Corresponds to the JSON property `userFn`
        # @return [Hash<String,Object>]
        attr_accessor :user_fn
      
        # The number of outputs.
        # Corresponds to the JSON property `numOutputs`
        # @return [Fixnum]
        attr_accessor :num_outputs
      
        # Information about each of the outputs, if user_fn is a MultiDoFn.
        # Corresponds to the JSON property `multiOutputInfos`
        # @return [Array<Google::Apis::DataflowV1b3::MultiOutputInfo>]
        attr_accessor :multi_output_infos
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @input = args[:input] if args.key?(:input)
          @side_inputs = args[:side_inputs] if args.key?(:side_inputs)
          @user_fn = args[:user_fn] if args.key?(:user_fn)
          @num_outputs = args[:num_outputs] if args.key?(:num_outputs)
          @multi_output_infos = args[:multi_output_infos] if args.key?(:multi_output_infos)
        end
      end
      
      # Information about a side input of a DoFn or an input of a SeqDoFn.
      class SideInputInfo
        include Google::Apis::Core::Hashable
      
        # The source(s) to read element(s) from to get the value of this side input. If
        # more than one source, then the elements are taken from the sources, in the
        # specified order if order matters. At least one source is required.
        # Corresponds to the JSON property `sources`
        # @return [Array<Google::Apis::DataflowV1b3::Source>]
        attr_accessor :sources
      
        # How to interpret the source element(s) as a side input value.
        # Corresponds to the JSON property `kind`
        # @return [Hash<String,Object>]
        attr_accessor :kind
      
        # The id of the tag the user code will access this side input by; this should
        # correspond to the tag of some MultiOutputInfo.
        # Corresponds to the JSON property `tag`
        # @return [String]
        attr_accessor :tag
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @sources = args[:sources] if args.key?(:sources)
          @kind = args[:kind] if args.key?(:kind)
          @tag = args[:tag] if args.key?(:tag)
        end
      end
      
      # Information about an output of a multi-output DoFn.
      class MultiOutputInfo
        include Google::Apis::Core::Hashable
      
        # The id of the tag the user code will emit to this output by; this should
        # correspond to the tag of some SideInputInfo.
        # Corresponds to the JSON property `tag`
        # @return [String]
        attr_accessor :tag
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @tag = args[:tag] if args.key?(:tag)
        end
      end
      
      # An instruction that does a partial group-by-key. One input and one output.
      class PartialGroupByKeyInstruction
        include Google::Apis::Core::Hashable
      
        # An input of an instruction, as a reference to an output of a producer
        # instruction.
        # Corresponds to the JSON property `input`
        # @return [Google::Apis::DataflowV1b3::InstructionInput]
        attr_accessor :input
      
        # The codec to use for interpreting an element in the input PTable.
        # Corresponds to the JSON property `inputElementCodec`
        # @return [Hash<String,Object>]
        attr_accessor :input_element_codec
      
        # The value combining function to invoke.
        # Corresponds to the JSON property `valueCombiningFn`
        # @return [Hash<String,Object>]
        attr_accessor :value_combining_fn
      
        # Zero or more side inputs.
        # Corresponds to the JSON property `sideInputs`
        # @return [Array<Google::Apis::DataflowV1b3::SideInputInfo>]
        attr_accessor :side_inputs
      
        # If this instruction includes a combining function, this is the name of the
        # CombineValues instruction lifted into this instruction.
        # Corresponds to the JSON property `originalCombineValuesStepName`
        # @return [String]
        attr_accessor :original_combine_values_step_name
      
        # If this instruction includes a combining function this is the name of the
        # intermediate store between the GBK and the CombineValues.
        # Corresponds to the JSON property `originalCombineValuesInputStoreName`
        # @return [String]
        attr_accessor :original_combine_values_input_store_name
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @input = args[:input] if args.key?(:input)
          @input_element_codec = args[:input_element_codec] if args.key?(:input_element_codec)
          @value_combining_fn = args[:value_combining_fn] if args.key?(:value_combining_fn)
          @side_inputs = args[:side_inputs] if args.key?(:side_inputs)
          @original_combine_values_step_name = args[:original_combine_values_step_name] if args.key?(:original_combine_values_step_name)
          @original_combine_values_input_store_name = args[:original_combine_values_input_store_name] if args.key?(:original_combine_values_input_store_name)
        end
      end
      
      # An instruction that copies its inputs (zero or more) to its (single) output.
      class FlattenInstruction
        include Google::Apis::Core::Hashable
      
        # Describes the inputs to the flatten instruction.
        # Corresponds to the JSON property `inputs`
        # @return [Array<Google::Apis::DataflowV1b3::InstructionInput>]
        attr_accessor :inputs
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @inputs = args[:inputs] if args.key?(:inputs)
        end
      end
      
      # An output of an instruction.
      class InstructionOutput
        include Google::Apis::Core::Hashable
      
        # The user-provided name of this output.
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # System-defined name of this output. Unique across the workflow.
        # Corresponds to the JSON property `systemName`
        # @return [String]
        attr_accessor :system_name
      
        # System-defined name for this output in the original workflow graph. Outputs
        # that do not contribute to an original instruction do not set this.
        # Corresponds to the JSON property `originalName`
        # @return [String]
        attr_accessor :original_name
      
        # The codec to use to encode data being written via this output.
        # Corresponds to the JSON property `codec`
        # @return [Hash<String,Object>]
        attr_accessor :codec
      
        # For system-generated byte and mean byte metrics, certain instructions should
        # only report the key size.
        # Corresponds to the JSON property `onlyCountKeyBytes`
        # @return [Boolean]
        attr_accessor :only_count_key_bytes
        alias_method :only_count_key_bytes?, :only_count_key_bytes
      
        # For system-generated byte and mean byte metrics, certain instructions should
        # only report the value size.
        # Corresponds to the JSON property `onlyCountValueBytes`
        # @return [Boolean]
        attr_accessor :only_count_value_bytes
        alias_method :only_count_value_bytes?, :only_count_value_bytes
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @name = args[:name] if args.key?(:name)
          @system_name = args[:system_name] if args.key?(:system_name)
          @original_name = args[:original_name] if args.key?(:original_name)
          @codec = args[:codec] if args.key?(:codec)
          @only_count_key_bytes = args[:only_count_key_bytes] if args.key?(:only_count_key_bytes)
          @only_count_value_bytes = args[:only_count_value_bytes] if args.key?(:only_count_value_bytes)
        end
      end
      
      # Describes a particular function to invoke.
      class SeqMapTask
        include Google::Apis::Core::Hashable
      
        # Information about each of the inputs.
        # Corresponds to the JSON property `inputs`
        # @return [Array<Google::Apis::DataflowV1b3::SideInputInfo>]
        attr_accessor :inputs
      
        # The user function to invoke.
        # Corresponds to the JSON property `userFn`
        # @return [Hash<String,Object>]
        attr_accessor :user_fn
      
        # Information about each of the outputs.
        # Corresponds to the JSON property `outputInfos`
        # @return [Array<Google::Apis::DataflowV1b3::SeqMapTaskOutputInfo>]
        attr_accessor :output_infos
      
        # The user-provided name of the SeqDo operation.
        # Corresponds to the JSON property `name`
        # @return [String]
        attr_accessor :name
      
        # System-defined name of the SeqDo operation. Unique across the workflow.
        # Corresponds to the JSON property `systemName`
        # @return [String]
        attr_accessor :system_name
      
        # System-defined name of the stage containing the SeqDo operation. Unique across
        # the workflow.
        # Corresponds to the JSON property `stageName`
        # @return [String]
        attr_accessor :stage_name
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @inputs = args[:inputs] if args.key?(:inputs)
          @user_fn = args[:user_fn] if args.key?(:user_fn)
          @output_infos = args[:output_infos] if args.key?(:output_infos)
          @name = args[:name] if args.key?(:name)
          @system_name = args[:system_name] if args.key?(:system_name)
          @stage_name = args[:stage_name] if args.key?(:stage_name)
        end
      end
      
      # Information about an output of a SeqMapTask.
      class SeqMapTaskOutputInfo
        include Google::Apis::Core::Hashable
      
        # The id of the TupleTag the user code will tag the output value by.
        # Corresponds to the JSON property `tag`
        # @return [String]
        attr_accessor :tag
      
        # A sink that records can be encoded and written to.
        # Corresponds to the JSON property `sink`
        # @return [Google::Apis::DataflowV1b3::Sink]
        attr_accessor :sink
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @tag = args[:tag] if args.key?(:tag)
          @sink = args[:sink] if args.key?(:sink)
        end
      end
      
      # A task which consists of a shell command for the worker to execute.
      class ShellTask
        include Google::Apis::Core::Hashable
      
        # The shell command to run.
        # Corresponds to the JSON property `command`
        # @return [String]
        attr_accessor :command
      
        # Exit code for the task.
        # Corresponds to the JSON property `exitCode`
        # @return [Fixnum]
        attr_accessor :exit_code
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @command = args[:command] if args.key?(:command)
          @exit_code = args[:exit_code] if args.key?(:exit_code)
        end
      end
      
      # A task which initializes part of a streaming Dataflow job.
      class StreamingSetupTask
        include Google::Apis::Core::Hashable
      
        # The TCP port on which the worker should listen for messages from other
        # streaming computation workers.
        # Corresponds to the JSON property `receiveWorkPort`
        # @return [Fixnum]
        attr_accessor :receive_work_port
      
        # The TCP port used by the worker to communicate with the Dataflow worker
        # harness.
        # Corresponds to the JSON property `workerHarnessPort`
        # @return [Fixnum]
        attr_accessor :worker_harness_port
      
        # Global topology of the streaming Dataflow job, including all computations and
        # their sharded locations.
        # Corresponds to the JSON property `streamingComputationTopology`
        # @return [Google::Apis::DataflowV1b3::TopologyConfig]
        attr_accessor :streaming_computation_topology
      
        # The user has requested drain.
        # Corresponds to the JSON property `drain`
        # @return [Boolean]
        attr_accessor :drain
        alias_method :drain?, :drain
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @receive_work_port = args[:receive_work_port] if args.key?(:receive_work_port)
          @worker_harness_port = args[:worker_harness_port] if args.key?(:worker_harness_port)
          @streaming_computation_topology = args[:streaming_computation_topology] if args.key?(:streaming_computation_topology)
          @drain = args[:drain] if args.key?(:drain)
        end
      end
      
      # Global topology of the streaming Dataflow job, including all computations and
      # their sharded locations.
      class TopologyConfig
        include Google::Apis::Core::Hashable
      
        # The computations associated with a streaming Dataflow job.
        # Corresponds to the JSON property `computations`
        # @return [Array<Google::Apis::DataflowV1b3::ComputationTopology>]
        attr_accessor :computations
      
        # The disks assigned to a streaming Dataflow job.
        # Corresponds to the JSON property `dataDiskAssignments`
        # @return [Array<Google::Apis::DataflowV1b3::DataDiskAssignment>]
        attr_accessor :data_disk_assignments
      
        # Maps user stage names to stable computation names.
        # Corresponds to the JSON property `userStageToComputationNameMap`
        # @return [Hash<String,String>]
        attr_accessor :user_stage_to_computation_name_map
      
        # The size (in bits) of keys that will be assigned to source messages.
        # Corresponds to the JSON property `forwardingKeyBits`
        # @return [Fixnum]
        attr_accessor :forwarding_key_bits
      
        # Version number for persistent state.
        # Corresponds to the JSON property `persistentStateVersion`
        # @return [Fixnum]
        attr_accessor :persistent_state_version
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @computations = args[:computations] if args.key?(:computations)
          @data_disk_assignments = args[:data_disk_assignments] if args.key?(:data_disk_assignments)
          @user_stage_to_computation_name_map = args[:user_stage_to_computation_name_map] if args.key?(:user_stage_to_computation_name_map)
          @forwarding_key_bits = args[:forwarding_key_bits] if args.key?(:forwarding_key_bits)
          @persistent_state_version = args[:persistent_state_version] if args.key?(:persistent_state_version)
        end
      end
      
      # All configuration data for a particular Computation.
      class ComputationTopology
        include Google::Apis::Core::Hashable
      
        # The system stage name.
        # Corresponds to the JSON property `systemStageName`
        # @return [String]
        attr_accessor :system_stage_name
      
        # The ID of the computation.
        # Corresponds to the JSON property `computationId`
        # @return [String]
        attr_accessor :computation_id
      
        # The user stage name.
        # Corresponds to the JSON property `userStageName`
        # @return [String]
        attr_accessor :user_stage_name
      
        # The key ranges processed by the computation.
        # Corresponds to the JSON property `keyRanges`
        # @return [Array<Google::Apis::DataflowV1b3::KeyRangeLocation>]
        attr_accessor :key_ranges
      
        # The inputs to the computation.
        # Corresponds to the JSON property `inputs`
        # @return [Array<Google::Apis::DataflowV1b3::StreamLocation>]
        attr_accessor :inputs
      
        # The outputs from the computation.
        # Corresponds to the JSON property `outputs`
        # @return [Array<Google::Apis::DataflowV1b3::StreamLocation>]
        attr_accessor :outputs
      
        # The state family values.
        # Corresponds to the JSON property `stateFamilies`
        # @return [Array<Google::Apis::DataflowV1b3::StateFamilyConfig>]
        attr_accessor :state_families
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @system_stage_name = args[:system_stage_name] if args.key?(:system_stage_name)
          @computation_id = args[:computation_id] if args.key?(:computation_id)
          @user_stage_name = args[:user_stage_name] if args.key?(:user_stage_name)
          @key_ranges = args[:key_ranges] if args.key?(:key_ranges)
          @inputs = args[:inputs] if args.key?(:inputs)
          @outputs = args[:outputs] if args.key?(:outputs)
          @state_families = args[:state_families] if args.key?(:state_families)
        end
      end
      
      # Location information for a specific key-range of a sharded computation.
      # Currently we only support UTF-8 character splits to simplify encoding into
      # JSON.
      class KeyRangeLocation
        include Google::Apis::Core::Hashable
      
        # The start (inclusive) of the key range.
        # Corresponds to the JSON property `start`
        # @return [String]
        attr_accessor :start
      
        # The end (exclusive) of the key range.
        # Corresponds to the JSON property `end`
        # @return [String]
        attr_accessor :end
      
        # The physical location of this range assignment to be used for streaming
        # computation cross-worker message delivery.
        # Corresponds to the JSON property `deliveryEndpoint`
        # @return [String]
        attr_accessor :delivery_endpoint
      
        # The location of the persistent state for this range, as a persistent directory
        # in the worker local filesystem.
        # Corresponds to the JSON property `persistentDirectory`
        # @return [String]
        attr_accessor :persistent_directory
      
        # The name of the data disk where data for this range is stored. This name is
        # local to the Google Cloud Platform project and uniquely identifies the disk
        # within that project, for example "myproject-1014-104817-4c2-harness-0-disk-1".
        # Corresponds to the JSON property `dataDisk`
        # @return [String]
        attr_accessor :data_disk
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @start = args[:start] if args.key?(:start)
          @end = args[:end] if args.key?(:end)
          @delivery_endpoint = args[:delivery_endpoint] if args.key?(:delivery_endpoint)
          @persistent_directory = args[:persistent_directory] if args.key?(:persistent_directory)
          @data_disk = args[:data_disk] if args.key?(:data_disk)
        end
      end
      
      # Describes a stream of data, either as input to be processed or as output of a
      # streaming Dataflow job.
      class StreamLocation
        include Google::Apis::Core::Hashable
      
        # Identifies the location of a streaming computation stage, for stage-to-stage
        # communication.
        # Corresponds to the JSON property `streamingStageLocation`
        # @return [Google::Apis::DataflowV1b3::StreamingStageLocation]
        attr_accessor :streaming_stage_location
      
        # Identifies a pubsub location to use for transferring data into or out of a
        # streaming Dataflow job.
        # Corresponds to the JSON property `pubsubLocation`
        # @return [Google::Apis::DataflowV1b3::PubsubLocation]
        attr_accessor :pubsub_location
      
        # Identifies the location of a streaming side input.
        # Corresponds to the JSON property `sideInputLocation`
        # @return [Google::Apis::DataflowV1b3::StreamingSideInputLocation]
        attr_accessor :side_input_location
      
        # Identifies the location of a custom souce.
        # Corresponds to the JSON property `customSourceLocation`
        # @return [Google::Apis::DataflowV1b3::CustomSourceLocation]
        attr_accessor :custom_source_location
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @streaming_stage_location = args[:streaming_stage_location] if args.key?(:streaming_stage_location)
          @pubsub_location = args[:pubsub_location] if args.key?(:pubsub_location)
          @side_input_location = args[:side_input_location] if args.key?(:side_input_location)
          @custom_source_location = args[:custom_source_location] if args.key?(:custom_source_location)
        end
      end
      
      # Identifies the location of a streaming computation stage, for stage-to-stage
      # communication.
      class StreamingStageLocation
        include Google::Apis::Core::Hashable
      
        # Identifies the particular stream within the streaming Dataflow job.
        # Corresponds to the JSON property `streamId`
        # @return [String]
        attr_accessor :stream_id
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @stream_id = args[:stream_id] if args.key?(:stream_id)
        end
      end
      
      # Identifies a pubsub location to use for transferring data into or out of a
      # streaming Dataflow job.
      class PubsubLocation
        include Google::Apis::Core::Hashable
      
        # A pubsub topic, in the form of "pubsub.googleapis.com/topics/
        # /"
        # Corresponds to the JSON property `topic`
        # @return [String]
        attr_accessor :topic
      
        # A pubsub subscription, in the form of "pubsub.googleapis.com/subscriptions/
        # /"
        # Corresponds to the JSON property `subscription`
        # @return [String]
        attr_accessor :subscription
      
        # If set, contains a pubsub label from which to extract record timestamps. If
        # left empty, record timestamps will be generated upon arrival.
        # Corresponds to the JSON property `timestampLabel`
        # @return [String]
        attr_accessor :timestamp_label
      
        # If set, contains a pubsub label from which to extract record ids. If left
        # empty, record deduplication will be strictly best effort.
        # Corresponds to the JSON property `idLabel`
        # @return [String]
        attr_accessor :id_label
      
        # Indicates whether the pipeline allows late-arriving data.
        # Corresponds to the JSON property `dropLateData`
        # @return [Boolean]
        attr_accessor :drop_late_data
        alias_method :drop_late_data?, :drop_late_data
      
        # If set, specifies the pubsub subscription that will be used for tracking
        # custom time timestamps for watermark estimation.
        # Corresponds to the JSON property `trackingSubscription`
        # @return [String]
        attr_accessor :tracking_subscription
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @topic = args[:topic] if args.key?(:topic)
          @subscription = args[:subscription] if args.key?(:subscription)
          @timestamp_label = args[:timestamp_label] if args.key?(:timestamp_label)
          @id_label = args[:id_label] if args.key?(:id_label)
          @drop_late_data = args[:drop_late_data] if args.key?(:drop_late_data)
          @tracking_subscription = args[:tracking_subscription] if args.key?(:tracking_subscription)
        end
      end
      
      # Identifies the location of a streaming side input.
      class StreamingSideInputLocation
        include Google::Apis::Core::Hashable
      
        # Identifies the particular side input within the streaming Dataflow job.
        # Corresponds to the JSON property `tag`
        # @return [String]
        attr_accessor :tag
      
        # Identifies the state family where this side input is stored.
        # Corresponds to the JSON property `stateFamily`
        # @return [String]
        attr_accessor :state_family
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @tag = args[:tag] if args.key?(:tag)
          @state_family = args[:state_family] if args.key?(:state_family)
        end
      end
      
      # Identifies the location of a custom souce.
      class CustomSourceLocation
        include Google::Apis::Core::Hashable
      
        # Whether this source is stateful.
        # Corresponds to the JSON property `stateful`
        # @return [Boolean]
        attr_accessor :stateful
        alias_method :stateful?, :stateful
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @stateful = args[:stateful] if args.key?(:stateful)
        end
      end
      
      # State family configuration.
      class StateFamilyConfig
        include Google::Apis::Core::Hashable
      
        # The state family value.
        # Corresponds to the JSON property `stateFamily`
        # @return [String]
        attr_accessor :state_family
      
        # If true, this family corresponds to a read operation.
        # Corresponds to the JSON property `isRead`
        # @return [Boolean]
        attr_accessor :is_read
        alias_method :is_read?, :is_read
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @state_family = args[:state_family] if args.key?(:state_family)
          @is_read = args[:is_read] if args.key?(:is_read)
        end
      end
      
      # Data disk assignment for a given VM instance.
      class DataDiskAssignment
        include Google::Apis::Core::Hashable
      
        # VM instance name the data disks mounted to, for example "myproject-1014-104817-
        # 4c2-harness-0".
        # Corresponds to the JSON property `vmInstance`
        # @return [String]
        attr_accessor :vm_instance
      
        # Mounted data disks. The order is important a data disk's 0-based index in this
        # list defines which persistent directory the disk is mounted to, for example
        # the list of ` "myproject-1014-104817-4c2-harness-0-disk-0" `, ` "myproject-
        # 1014-104817-4c2-harness-0-disk-1" `.
        # Corresponds to the JSON property `dataDisks`
        # @return [Array<String>]
        attr_accessor :data_disks
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @vm_instance = args[:vm_instance] if args.key?(:vm_instance)
          @data_disks = args[:data_disks] if args.key?(:data_disks)
        end
      end
      
      # A work item that represents the different operations that can be performed on
      # a user-defined Source specification.
      class SourceOperationRequest
        include Google::Apis::Core::Hashable
      
        # Represents the operation to split a high-level Source specification into
        # bundles (parts for parallel processing). At a high level, splitting of a
        # source into bundles happens as follows: SourceSplitRequest is applied to the
        # source. If it returns SOURCE_SPLIT_OUTCOME_USE_CURRENT, no further splitting
        # happens and the source is used "as is". Otherwise, splitting is applied
        # recursively to each produced DerivedSource. As an optimization, for any Source,
        # if its does_not_need_splitting is true, the framework assumes that splitting
        # this source would return SOURCE_SPLIT_OUTCOME_USE_CURRENT, and doesn't
        # initiate a SourceSplitRequest. This applies both to the initial source being
        # split and to bundles produced from it.
        # Corresponds to the JSON property `split`
        # @return [Google::Apis::DataflowV1b3::SourceSplitRequest]
        attr_accessor :split
      
        # A request to compute the SourceMetadata of a Source.
        # Corresponds to the JSON property `getMetadata`
        # @return [Google::Apis::DataflowV1b3::SourceGetMetadataRequest]
        attr_accessor :get_metadata
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @split = args[:split] if args.key?(:split)
          @get_metadata = args[:get_metadata] if args.key?(:get_metadata)
        end
      end
      
      # Represents the operation to split a high-level Source specification into
      # bundles (parts for parallel processing). At a high level, splitting of a
      # source into bundles happens as follows: SourceSplitRequest is applied to the
      # source. If it returns SOURCE_SPLIT_OUTCOME_USE_CURRENT, no further splitting
      # happens and the source is used "as is". Otherwise, splitting is applied
      # recursively to each produced DerivedSource. As an optimization, for any Source,
      # if its does_not_need_splitting is true, the framework assumes that splitting
      # this source would return SOURCE_SPLIT_OUTCOME_USE_CURRENT, and doesn't
      # initiate a SourceSplitRequest. This applies both to the initial source being
      # split and to bundles produced from it.
      class SourceSplitRequest
        include Google::Apis::Core::Hashable
      
        # A source that records can be read and decoded from.
        # Corresponds to the JSON property `source`
        # @return [Google::Apis::DataflowV1b3::Source]
        attr_accessor :source
      
        # Hints for splitting a Source into bundles (parts for parallel processing)
        # using SourceSplitRequest.
        # Corresponds to the JSON property `options`
        # @return [Google::Apis::DataflowV1b3::SourceSplitOptions]
        attr_accessor :options
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @source = args[:source] if args.key?(:source)
          @options = args[:options] if args.key?(:options)
        end
      end
      
      # Hints for splitting a Source into bundles (parts for parallel processing)
      # using SourceSplitRequest.
      class SourceSplitOptions
        include Google::Apis::Core::Hashable
      
        # The source should be split into a set of bundles where the estimated size of
        # each is approximately this many bytes.
        # Corresponds to the JSON property `desiredBundleSizeBytes`
        # @return [String]
        attr_accessor :desired_bundle_size_bytes
      
        # DEPRECATED in favor of desired_bundle_size_bytes.
        # Corresponds to the JSON property `desiredShardSizeBytes`
        # @return [String]
        attr_accessor :desired_shard_size_bytes
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @desired_bundle_size_bytes = args[:desired_bundle_size_bytes] if args.key?(:desired_bundle_size_bytes)
          @desired_shard_size_bytes = args[:desired_shard_size_bytes] if args.key?(:desired_shard_size_bytes)
        end
      end
      
      # A request to compute the SourceMetadata of a Source.
      class SourceGetMetadataRequest
        include Google::Apis::Core::Hashable
      
        # A source that records can be read and decoded from.
        # Corresponds to the JSON property `source`
        # @return [Google::Apis::DataflowV1b3::Source]
        attr_accessor :source
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @source = args[:source] if args.key?(:source)
        end
      end
      
      # A task which describes what action should be performed for the specified
      # streaming computation ranges.
      class StreamingComputationTask
        include Google::Apis::Core::Hashable
      
        # A type of streaming computation task.
        # Corresponds to the JSON property `taskType`
        # @return [String]
        attr_accessor :task_type
      
        # Describes the set of data disks this task should apply to.
        # Corresponds to the JSON property `dataDisks`
        # @return [Array<Google::Apis::DataflowV1b3::MountedDataDisk>]
        attr_accessor :data_disks
      
        # Contains ranges of a streaming computation this task should apply to.
        # Corresponds to the JSON property `computationRanges`
        # @return [Array<Google::Apis::DataflowV1b3::StreamingComputationRanges>]
        attr_accessor :computation_ranges
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @task_type = args[:task_type] if args.key?(:task_type)
          @data_disks = args[:data_disks] if args.key?(:data_disks)
          @computation_ranges = args[:computation_ranges] if args.key?(:computation_ranges)
        end
      end
      
      # Describes mounted data disk.
      class MountedDataDisk
        include Google::Apis::Core::Hashable
      
        # The name of the data disk. This name is local to the Google Cloud Platform
        # project and uniquely identifies the disk within that project, for example "
        # myproject-1014-104817-4c2-harness-0-disk-1".
        # Corresponds to the JSON property `dataDisk`
        # @return [String]
        attr_accessor :data_disk
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @data_disk = args[:data_disk] if args.key?(:data_disk)
        end
      end
      
      # Describes full or partial data disk assignment information of the computation
      # ranges.
      class StreamingComputationRanges
        include Google::Apis::Core::Hashable
      
        # The ID of the computation.
        # Corresponds to the JSON property `computationId`
        # @return [String]
        attr_accessor :computation_id
      
        # Data disk assignments for ranges from this computation.
        # Corresponds to the JSON property `rangeAssignments`
        # @return [Array<Google::Apis::DataflowV1b3::KeyRangeDataDiskAssignment>]
        attr_accessor :range_assignments
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @computation_id = args[:computation_id] if args.key?(:computation_id)
          @range_assignments = args[:range_assignments] if args.key?(:range_assignments)
        end
      end
      
      # Data disk assignment information for a specific key-range of a sharded
      # computation. Currently we only support UTF-8 character splits to simplify
      # encoding into JSON.
      class KeyRangeDataDiskAssignment
        include Google::Apis::Core::Hashable
      
        # The start (inclusive) of the key range.
        # Corresponds to the JSON property `start`
        # @return [String]
        attr_accessor :start
      
        # The end (exclusive) of the key range.
        # Corresponds to the JSON property `end`
        # @return [String]
        attr_accessor :end
      
        # The name of the data disk where data for this range is stored. This name is
        # local to the Google Cloud Platform project and uniquely identifies the disk
        # within that project, for example "myproject-1014-104817-4c2-harness-0-disk-1".
        # Corresponds to the JSON property `dataDisk`
        # @return [String]
        attr_accessor :data_disk
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @start = args[:start] if args.key?(:start)
          @end = args[:end] if args.key?(:end)
          @data_disk = args[:data_disk] if args.key?(:data_disk)
        end
      end
      
      # A task that carries configuration information for streaming computations.
      class StreamingConfigTask
        include Google::Apis::Core::Hashable
      
        # Set of computation configuration information.
        # Corresponds to the JSON property `streamingComputationConfigs`
        # @return [Array<Google::Apis::DataflowV1b3::StreamingComputationConfig>]
        attr_accessor :streaming_computation_configs
      
        # Map from user step names to state families.
        # Corresponds to the JSON property `userStepToStateFamilyNameMap`
        # @return [Hash<String,String>]
        attr_accessor :user_step_to_state_family_name_map
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @streaming_computation_configs = args[:streaming_computation_configs] if args.key?(:streaming_computation_configs)
          @user_step_to_state_family_name_map = args[:user_step_to_state_family_name_map] if args.key?(:user_step_to_state_family_name_map)
        end
      end
      
      # Configuration information for a single streaming computation.
      class StreamingComputationConfig
        include Google::Apis::Core::Hashable
      
        # Unique identifier for this computation.
        # Corresponds to the JSON property `computationId`
        # @return [String]
        attr_accessor :computation_id
      
        # System defined name for this computation.
        # Corresponds to the JSON property `systemName`
        # @return [String]
        attr_accessor :system_name
      
        # Stage name of this computation.
        # Corresponds to the JSON property `stageName`
        # @return [String]
        attr_accessor :stage_name
      
        # Instructions that comprise the computation.
        # Corresponds to the JSON property `instructions`
        # @return [Array<Google::Apis::DataflowV1b3::ParallelInstruction>]
        attr_accessor :instructions
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @computation_id = args[:computation_id] if args.key?(:computation_id)
          @system_name = args[:system_name] if args.key?(:system_name)
          @stage_name = args[:stage_name] if args.key?(:stage_name)
          @instructions = args[:instructions] if args.key?(:instructions)
        end
      end
      
      # A request for sending worker messages to the service.
      class SendWorkerMessagesRequest
        include Google::Apis::Core::Hashable
      
        # The WorkerMessages to send.
        # Corresponds to the JSON property `workerMessages`
        # @return [Array<Google::Apis::DataflowV1b3::WorkerMessage>]
        attr_accessor :worker_messages
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @worker_messages = args[:worker_messages] if args.key?(:worker_messages)
        end
      end
      
      # WorkerMessage provides information to the backend about a worker.
      class WorkerMessage
        include Google::Apis::Core::Hashable
      
        # Labels are used to group WorkerMessages. For example, a worker_message about a
        # particular container might have the labels: ` "JOB_ID": "2015-04-22", "
        # WORKER_ID": "wordcount-vm-2015…" "CONTAINER_TYPE": "worker", "CONTAINER_ID": "
        # ac1234def"` Label tags typically correspond to Label enum values. However, for
        # ease of development other strings can be used as tags. LABEL_UNSPECIFIED
        # should not be used here.
        # Corresponds to the JSON property `labels`
        # @return [Hash<String,String>]
        attr_accessor :labels
      
        # The timestamp of the worker_message.
        # Corresponds to the JSON property `time`
        # @return [String]
        attr_accessor :time
      
        # WorkerHealthReport contains information about the health of a worker. The VM
        # should be identified by the labels attached to the WorkerMessage that this
        # health ping belongs to.
        # Corresponds to the JSON property `workerHealthReport`
        # @return [Google::Apis::DataflowV1b3::WorkerHealthReport]
        attr_accessor :worker_health_report
      
        # A message code is used to report status and error messages to the service. The
        # message codes are intended to be machine readable. The service will take care
        # of translating these into user understandable messages if necessary. Example
        # use cases: 1. Worker processes reporting successful startup. 2. Worker
        # processes reporting specific errors (e.g. package staging failure).
        # Corresponds to the JSON property `workerMessageCode`
        # @return [Google::Apis::DataflowV1b3::WorkerMessageCode]
        attr_accessor :worker_message_code
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @labels = args[:labels] if args.key?(:labels)
          @time = args[:time] if args.key?(:time)
          @worker_health_report = args[:worker_health_report] if args.key?(:worker_health_report)
          @worker_message_code = args[:worker_message_code] if args.key?(:worker_message_code)
        end
      end
      
      # WorkerHealthReport contains information about the health of a worker. The VM
      # should be identified by the labels attached to the WorkerMessage that this
      # health ping belongs to.
      class WorkerHealthReport
        include Google::Apis::Core::Hashable
      
        # Whether the VM is healthy.
        # Corresponds to the JSON property `vmIsHealthy`
        # @return [Boolean]
        attr_accessor :vm_is_healthy
        alias_method :vm_is_healthy?, :vm_is_healthy
      
        # The time the VM was booted.
        # Corresponds to the JSON property `vmStartupTime`
        # @return [String]
        attr_accessor :vm_startup_time
      
        # The interval at which the worker is sending health reports. The default value
        # of 0 should be interpreted as the field is not being explicitly set by the
        # worker.
        # Corresponds to the JSON property `reportInterval`
        # @return [String]
        attr_accessor :report_interval
      
        # The pods running on the worker. See: http://kubernetes.io/v1.1/docs/api-
        # reference/v1/definitions.html#_v1_pod This field is used by the worker to send
        # the status of the indvidual containers running on each worker.
        # Corresponds to the JSON property `pods`
        # @return [Array<Hash<String,Object>>]
        attr_accessor :pods
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @vm_is_healthy = args[:vm_is_healthy] if args.key?(:vm_is_healthy)
          @vm_startup_time = args[:vm_startup_time] if args.key?(:vm_startup_time)
          @report_interval = args[:report_interval] if args.key?(:report_interval)
          @pods = args[:pods] if args.key?(:pods)
        end
      end
      
      # A message code is used to report status and error messages to the service. The
      # message codes are intended to be machine readable. The service will take care
      # of translating these into user understandable messages if necessary. Example
      # use cases: 1. Worker processes reporting successful startup. 2. Worker
      # processes reporting specific errors (e.g. package staging failure).
      class WorkerMessageCode
        include Google::Apis::Core::Hashable
      
        # The code is a string intended for consumption by a machine that identifies the
        # type of message being sent. Examples: 1. "HARNESS_STARTED" might be used to
        # indicate the worker harness has started. 2. "GCS_DOWNLOAD_ERROR" might be used
        # to indicate an error downloading a GCS file as part of the boot process of one
        # of the worker containers. This is a string and not an enum to make it easy to
        # add new codes without waiting for an API change.
        # Corresponds to the JSON property `code`
        # @return [String]
        attr_accessor :code
      
        # Parameters contains specific information about the code. This is a struct to
        # allow parameters of different types. Examples: 1. For a "HARNESS_STARTED"
        # message parameters might provide the name of the worker and additional data
        # like timing information. 2. For a "GCS_DOWNLOAD_ERROR" parameters might
        # contain fields listing the GCS objects being downloaded and fields containing
        # errors. In general complex data structures should be avoided. If a worker
        # needs to send a specific and complicated data structure then please consider
        # defining a new proto and adding it to the data oneof in WorkerMessageResponse.
        # Conventions: Parameters should only be used for information that isn't
        # typically passed as a label. hostname and other worker identifiers should
        # almost always be passed as labels since they will be included on most messages.
        # Corresponds to the JSON property `parameters`
        # @return [Hash<String,Object>]
        attr_accessor :parameters
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @code = args[:code] if args.key?(:code)
          @parameters = args[:parameters] if args.key?(:parameters)
        end
      end
      
      # The response to the worker messages.
      class SendWorkerMessagesResponse
        include Google::Apis::Core::Hashable
      
        # The servers response to the worker messages.
        # Corresponds to the JSON property `workerMessageResponses`
        # @return [Array<Google::Apis::DataflowV1b3::WorkerMessageResponse>]
        attr_accessor :worker_message_responses
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @worker_message_responses = args[:worker_message_responses] if args.key?(:worker_message_responses)
        end
      end
      
      # A worker_message response allows the server to pass information to the sender.
      class WorkerMessageResponse
        include Google::Apis::Core::Hashable
      
        # WorkerHealthReportResponse contains information returned to the worker in
        # response to a health ping.
        # Corresponds to the JSON property `workerHealthReportResponse`
        # @return [Google::Apis::DataflowV1b3::WorkerHealthReportResponse]
        attr_accessor :worker_health_report_response
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @worker_health_report_response = args[:worker_health_report_response] if args.key?(:worker_health_report_response)
        end
      end
      
      # WorkerHealthReportResponse contains information returned to the worker in
      # response to a health ping.
      class WorkerHealthReportResponse
        include Google::Apis::Core::Hashable
      
        # A positive value indicates the worker should change its reporting interval to
        # the specified value. The default value of zero means no change in report rate
        # is requested by the server.
        # Corresponds to the JSON property `reportInterval`
        # @return [String]
        attr_accessor :report_interval
      
        def initialize(**args)
           update!(**args)
        end
      
        # Update properties of this object
        def update!(**args)
          @report_interval = args[:report_interval] if args.key?(:report_interval)
        end
      end
    end
  end
end