# Copyright 2015 Google Inc. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. require 'date' require 'google/apis/core/base_service' require 'google/apis/core/json_representation' require 'google/apis/core/hashable' require 'google/apis/errors' module Google module Apis module LoggingV2beta1 # BucketOptions describes the bucket boundaries used to create a histogram for # the distribution. The buckets can be in a linear sequence, an exponential # sequence, or each bucket can be specified explicitly. BucketOptions does not # include the number of values in each bucket.A bucket has an inclusive lower # bound and exclusive upper bound for the values that are counted for that # bucket. The upper bound of a bucket must be strictly greater than the lower # bound. The sequence of N buckets for a distribution consists of an underflow # bucket (number 0), zero or more finite buckets (number 1 through N - 2) and an # overflow bucket (number N - 1). The buckets are contiguous: the lower bound of # bucket i (i > 0) is the same as the upper bound of bucket i - 1. The buckets # span the whole range of finite values: lower bound of the underflow bucket is - # infinity and the upper bound of the overflow bucket is +infinity. The finite # buckets are so-called because both bounds are finite. class BucketOptions include Google::Apis::Core::Hashable # Specifies a set of buckets with arbitrary widths.There are size(bounds) + 1 (= # N) buckets. Bucket i has the following boundaries:Upper bound (0 <= i < N-1): # boundsi Lower bound (1 <= i < N); boundsi - 1The bounds field must contain at # least one element. If bounds has only one element, then there are no finite # buckets, and that single element is the common boundary of the overflow and # underflow buckets. # Corresponds to the JSON property `explicitBuckets` # @return [Google::Apis::LoggingV2beta1::Explicit] attr_accessor :explicit_buckets # Specifies an exponential sequence of buckets that have a width that is # proportional to the value of the lower bound. Each bucket represents a # constant relative uncertainty on a specific value in the bucket.There are # num_finite_buckets + 2 (= N) buckets. Bucket i has the following boundaries: # Upper bound (0 <= i < N-1): scale * (growth_factor ^ i). Lower bound (1 <= i < # N): scale * (growth_factor ^ (i - 1)). # Corresponds to the JSON property `exponentialBuckets` # @return [Google::Apis::LoggingV2beta1::Exponential] attr_accessor :exponential_buckets # Specifies a linear sequence of buckets that all have the same width (except # overflow and underflow). Each bucket represents a constant absolute # uncertainty on the specific value in the bucket.There are num_finite_buckets + # 2 (= N) buckets. Bucket i has the following boundaries:Upper bound (0 <= i < N- # 1): offset + (width * i). Lower bound (1 <= i < N): offset + (width * (i - 1)) # . # Corresponds to the JSON property `linearBuckets` # @return [Google::Apis::LoggingV2beta1::Linear] attr_accessor :linear_buckets def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @explicit_buckets = args[:explicit_buckets] if args.key?(:explicit_buckets) @exponential_buckets = args[:exponential_buckets] if args.key?(:exponential_buckets) @linear_buckets = args[:linear_buckets] if args.key?(:linear_buckets) end end # A generic empty message that you can re-use to avoid defining duplicated empty # messages in your APIs. A typical example is to use it as the request or the # response type of an API method. For instance: # service Foo ` # rpc Bar(google.protobuf.Empty) returns (google.protobuf.Empty); # ` # The JSON representation for Empty is empty JSON object ``. class Empty include Google::Apis::Core::Hashable def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) end end # Specifies a set of buckets with arbitrary widths.There are size(bounds) + 1 (= # N) buckets. Bucket i has the following boundaries:Upper bound (0 <= i < N-1): # boundsi Lower bound (1 <= i < N); boundsi - 1The bounds field must contain at # least one element. If bounds has only one element, then there are no finite # buckets, and that single element is the common boundary of the overflow and # underflow buckets. class Explicit include Google::Apis::Core::Hashable # The values must be monotonically increasing. # Corresponds to the JSON property `bounds` # @return [Array] attr_accessor :bounds def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @bounds = args[:bounds] if args.key?(:bounds) end end # Specifies an exponential sequence of buckets that have a width that is # proportional to the value of the lower bound. Each bucket represents a # constant relative uncertainty on a specific value in the bucket.There are # num_finite_buckets + 2 (= N) buckets. Bucket i has the following boundaries: # Upper bound (0 <= i < N-1): scale * (growth_factor ^ i). Lower bound (1 <= i < # N): scale * (growth_factor ^ (i - 1)). class Exponential include Google::Apis::Core::Hashable # Must be greater than 1. # Corresponds to the JSON property `growthFactor` # @return [Float] attr_accessor :growth_factor # Must be greater than 0. # Corresponds to the JSON property `numFiniteBuckets` # @return [Fixnum] attr_accessor :num_finite_buckets # Must be greater than 0. # Corresponds to the JSON property `scale` # @return [Float] attr_accessor :scale def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @growth_factor = args[:growth_factor] if args.key?(:growth_factor) @num_finite_buckets = args[:num_finite_buckets] if args.key?(:num_finite_buckets) @scale = args[:scale] if args.key?(:scale) end end # A common proto for logging HTTP requests. Only contains semantics defined by # the HTTP specification. Product-specific logging information MUST be defined # in a separate message. class HttpRequest include Google::Apis::Core::Hashable # The number of HTTP response bytes inserted into cache. Set only when a cache # fill was attempted. # Corresponds to the JSON property `cacheFillBytes` # @return [Fixnum] attr_accessor :cache_fill_bytes # Whether or not an entity was served from cache (with or without validation). # Corresponds to the JSON property `cacheHit` # @return [Boolean] attr_accessor :cache_hit alias_method :cache_hit?, :cache_hit # Whether or not a cache lookup was attempted. # Corresponds to the JSON property `cacheLookup` # @return [Boolean] attr_accessor :cache_lookup alias_method :cache_lookup?, :cache_lookup # Whether or not the response was validated with the origin server before being # served from cache. This field is only meaningful if cache_hit is True. # Corresponds to the JSON property `cacheValidatedWithOriginServer` # @return [Boolean] attr_accessor :cache_validated_with_origin_server alias_method :cache_validated_with_origin_server?, :cache_validated_with_origin_server # The request processing latency on the server, from the time the request was # received until the response was sent. # Corresponds to the JSON property `latency` # @return [String] attr_accessor :latency # Protocol used for the request. Examples: "HTTP/1.1", "HTTP/2", "websocket" # Corresponds to the JSON property `protocol` # @return [String] attr_accessor :protocol # The referer URL of the request, as defined in HTTP/1.1 Header Field # Definitions (http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html). # Corresponds to the JSON property `referer` # @return [String] attr_accessor :referer # The IP address (IPv4 or IPv6) of the client that issued the HTTP request. # Examples: "192.168.1.1", "FE80::0202:B3FF:FE1E:8329". # Corresponds to the JSON property `remoteIp` # @return [String] attr_accessor :remote_ip # The request method. Examples: "GET", "HEAD", "PUT", "POST". # Corresponds to the JSON property `requestMethod` # @return [String] attr_accessor :request_method # The size of the HTTP request message in bytes, including the request headers # and the request body. # Corresponds to the JSON property `requestSize` # @return [Fixnum] attr_accessor :request_size # The scheme (http, https), the host name, the path and the query portion of the # URL that was requested. Example: "http://example.com/some/info?color=red". # Corresponds to the JSON property `requestUrl` # @return [String] attr_accessor :request_url # The size of the HTTP response message sent back to the client, in bytes, # including the response headers and the response body. # Corresponds to the JSON property `responseSize` # @return [Fixnum] attr_accessor :response_size # The IP address (IPv4 or IPv6) of the origin server that the request was sent # to. # Corresponds to the JSON property `serverIp` # @return [String] attr_accessor :server_ip # The response code indicating the status of response. Examples: 200, 404. # Corresponds to the JSON property `status` # @return [Fixnum] attr_accessor :status # The user agent sent by the client. Example: "Mozilla/4.0 (compatible; MSIE 6.0; # Windows 98; Q312461; .NET CLR 1.0.3705)". # Corresponds to the JSON property `userAgent` # @return [String] attr_accessor :user_agent def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @cache_fill_bytes = args[:cache_fill_bytes] if args.key?(:cache_fill_bytes) @cache_hit = args[:cache_hit] if args.key?(:cache_hit) @cache_lookup = args[:cache_lookup] if args.key?(:cache_lookup) @cache_validated_with_origin_server = args[:cache_validated_with_origin_server] if args.key?(:cache_validated_with_origin_server) @latency = args[:latency] if args.key?(:latency) @protocol = args[:protocol] if args.key?(:protocol) @referer = args[:referer] if args.key?(:referer) @remote_ip = args[:remote_ip] if args.key?(:remote_ip) @request_method = args[:request_method] if args.key?(:request_method) @request_size = args[:request_size] if args.key?(:request_size) @request_url = args[:request_url] if args.key?(:request_url) @response_size = args[:response_size] if args.key?(:response_size) @server_ip = args[:server_ip] if args.key?(:server_ip) @status = args[:status] if args.key?(:status) @user_agent = args[:user_agent] if args.key?(:user_agent) end end # A description of a label. class LabelDescriptor include Google::Apis::Core::Hashable # A human-readable description for the label. # Corresponds to the JSON property `description` # @return [String] attr_accessor :description # The label key. # Corresponds to the JSON property `key` # @return [String] attr_accessor :key # The type of data that can be assigned to the label. # Corresponds to the JSON property `valueType` # @return [String] attr_accessor :value_type def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @description = args[:description] if args.key?(:description) @key = args[:key] if args.key?(:key) @value_type = args[:value_type] if args.key?(:value_type) end end # Specifies a linear sequence of buckets that all have the same width (except # overflow and underflow). Each bucket represents a constant absolute # uncertainty on the specific value in the bucket.There are num_finite_buckets + # 2 (= N) buckets. Bucket i has the following boundaries:Upper bound (0 <= i < N- # 1): offset + (width * i). Lower bound (1 <= i < N): offset + (width * (i - 1)) # . class Linear include Google::Apis::Core::Hashable # Must be greater than 0. # Corresponds to the JSON property `numFiniteBuckets` # @return [Fixnum] attr_accessor :num_finite_buckets # Lower bound of the first bucket. # Corresponds to the JSON property `offset` # @return [Float] attr_accessor :offset # Must be greater than 0. # Corresponds to the JSON property `width` # @return [Float] attr_accessor :width def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @num_finite_buckets = args[:num_finite_buckets] if args.key?(:num_finite_buckets) @offset = args[:offset] if args.key?(:offset) @width = args[:width] if args.key?(:width) end end # The parameters to ListLogEntries. class ListLogEntriesRequest include Google::Apis::Core::Hashable # Optional. A filter that chooses which log entries to return. See Advanced Logs # Filters. Only log entries that match the filter are returned. An empty filter # matches all log entries in the resources listed in resource_names. Referencing # a parent resource that is not listed in resource_names will cause the filter # to return no results. The maximum length of the filter is 20000 characters. # Corresponds to the JSON property `filter` # @return [String] attr_accessor :filter # Optional. How the results should be sorted. Presently, the only permitted # values are "timestamp asc" (default) and "timestamp desc". The first option # returns entries in order of increasing values of LogEntry.timestamp (oldest # first), and the second option returns entries in order of decreasing # timestamps (newest first). Entries with equal timestamps are returned in order # of their insert_id values. # Corresponds to the JSON property `orderBy` # @return [String] attr_accessor :order_by # Optional. The maximum number of results to return from this request. Non- # positive values are ignored. The presence of next_page_token in the response # indicates that more results might be available. # Corresponds to the JSON property `pageSize` # @return [Fixnum] attr_accessor :page_size # Optional. If present, then retrieve the next batch of results from the # preceding call to this method. page_token must be the value of next_page_token # from the previous response. The values of other method parameters should be # identical to those in the previous call. # Corresponds to the JSON property `pageToken` # @return [String] attr_accessor :page_token # Deprecated. Use resource_names instead. One or more project identifiers or # project numbers from which to retrieve log entries. Example: "my-project-1A". # If present, these project identifiers are converted to resource name format # and added to the list of resources in resource_names. # Corresponds to the JSON property `projectIds` # @return [Array] attr_accessor :project_ids # Required. Names of one or more parent resources from which to retrieve log # entries: # "projects/[PROJECT_ID]" # "organizations/[ORGANIZATION_ID]" # "billingAccounts/[BILLING_ACCOUNT_ID]" # "folders/[FOLDER_ID]" # Projects listed in the project_ids field are added to this list. # Corresponds to the JSON property `resourceNames` # @return [Array] attr_accessor :resource_names def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @filter = args[:filter] if args.key?(:filter) @order_by = args[:order_by] if args.key?(:order_by) @page_size = args[:page_size] if args.key?(:page_size) @page_token = args[:page_token] if args.key?(:page_token) @project_ids = args[:project_ids] if args.key?(:project_ids) @resource_names = args[:resource_names] if args.key?(:resource_names) end end # Result returned from ListLogEntries. class ListLogEntriesResponse include Google::Apis::Core::Hashable # A list of log entries. If entries is empty, nextPageToken may still be # returned, indicating that more entries may exist. See nextPageToken for more # information. # Corresponds to the JSON property `entries` # @return [Array] attr_accessor :entries # If there might be more results than those appearing in this response, then # nextPageToken is included. To get the next set of results, call this method # again using the value of nextPageToken as pageToken.If a value for # next_page_token appears and the entries field is empty, it means that the # search found no log entries so far but it did not have time to search all the # possible log entries. Retry the method with this value for page_token to # continue the search. Alternatively, consider speeding up the search by # changing your filter to specify a single log name or resource type, or to # narrow the time range of the search. # Corresponds to the JSON property `nextPageToken` # @return [String] attr_accessor :next_page_token def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @entries = args[:entries] if args.key?(:entries) @next_page_token = args[:next_page_token] if args.key?(:next_page_token) end end # Result returned from ListLogMetrics. class ListLogMetricsResponse include Google::Apis::Core::Hashable # A list of logs-based metrics. # Corresponds to the JSON property `metrics` # @return [Array] attr_accessor :metrics # If there might be more results than appear in this response, then # nextPageToken is included. To get the next set of results, call this method # again using the value of nextPageToken as pageToken. # Corresponds to the JSON property `nextPageToken` # @return [String] attr_accessor :next_page_token def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @metrics = args[:metrics] if args.key?(:metrics) @next_page_token = args[:next_page_token] if args.key?(:next_page_token) end end # Result returned from ListLogs. class ListLogsResponse include Google::Apis::Core::Hashable # A list of log names. For example, "projects/my-project/syslog" or " # organizations/123/cloudresourcemanager.googleapis.com%2Factivity". # Corresponds to the JSON property `logNames` # @return [Array] attr_accessor :log_names # If there might be more results than those appearing in this response, then # nextPageToken is included. To get the next set of results, call this method # again using the value of nextPageToken as pageToken. # Corresponds to the JSON property `nextPageToken` # @return [String] attr_accessor :next_page_token def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @log_names = args[:log_names] if args.key?(:log_names) @next_page_token = args[:next_page_token] if args.key?(:next_page_token) end end # Result returned from ListMonitoredResourceDescriptors. class ListMonitoredResourceDescriptorsResponse include Google::Apis::Core::Hashable # If there might be more results than those appearing in this response, then # nextPageToken is included. To get the next set of results, call this method # again using the value of nextPageToken as pageToken. # Corresponds to the JSON property `nextPageToken` # @return [String] attr_accessor :next_page_token # A list of resource descriptors. # Corresponds to the JSON property `resourceDescriptors` # @return [Array] attr_accessor :resource_descriptors def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @next_page_token = args[:next_page_token] if args.key?(:next_page_token) @resource_descriptors = args[:resource_descriptors] if args.key?(:resource_descriptors) end end # Result returned from ListSinks. class ListSinksResponse include Google::Apis::Core::Hashable # If there might be more results than appear in this response, then # nextPageToken is included. To get the next set of results, call the same # method again using the value of nextPageToken as pageToken. # Corresponds to the JSON property `nextPageToken` # @return [String] attr_accessor :next_page_token # A list of sinks. # Corresponds to the JSON property `sinks` # @return [Array] attr_accessor :sinks def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @next_page_token = args[:next_page_token] if args.key?(:next_page_token) @sinks = args[:sinks] if args.key?(:sinks) end end # An individual entry in a log. class LogEntry include Google::Apis::Core::Hashable # A common proto for logging HTTP requests. Only contains semantics defined by # the HTTP specification. Product-specific logging information MUST be defined # in a separate message. # Corresponds to the JSON property `httpRequest` # @return [Google::Apis::LoggingV2beta1::HttpRequest] attr_accessor :http_request # Optional. A unique identifier for the log entry. If you provide a value, then # Stackdriver Logging considers other log entries in the same project, with the # same timestamp, and with the same insert_id to be duplicates which can be # removed. If omitted in new log entries, then Stackdriver Logging assigns its # own unique identifier. The insert_id is also used to order log entries that # have the same timestamp value. # Corresponds to the JSON property `insertId` # @return [String] attr_accessor :insert_id # The log entry payload, represented as a structure that is expressed as a JSON # object. # Corresponds to the JSON property `jsonPayload` # @return [Hash] attr_accessor :json_payload # Optional. A set of user-defined (key, value) data that provides additional # information about the log entry. # Corresponds to the JSON property `labels` # @return [Hash] attr_accessor :labels # Required. The resource name of the log to which this log entry belongs: # "projects/[PROJECT_ID]/logs/[LOG_ID]" # "organizations/[ORGANIZATION_ID]/logs/[LOG_ID]" # "billingAccounts/[BILLING_ACCOUNT_ID]/logs/[LOG_ID]" # "folders/[FOLDER_ID]/logs/[LOG_ID]" # A project number may optionally be used in place of PROJECT_ID. The project # number is translated to its corresponding PROJECT_ID internally and the # log_name field will contain PROJECT_ID in queries and exports.[LOG_ID] must be # URL-encoded within log_name. Example: "organizations/1234567890/logs/ # cloudresourcemanager.googleapis.com%2Factivity". [LOG_ID] must be less than # 512 characters long and can only include the following characters: upper and # lower case alphanumeric characters, forward-slash, underscore, hyphen, and # period.For backward compatibility, if log_name begins with a forward-slash, # such as /projects/..., then the log entry is ingested as usual but the forward- # slash is removed. Listing the log entry will not show the leading slash and # filtering for a log name with a leading slash will never return any results. # Corresponds to the JSON property `logName` # @return [String] attr_accessor :log_name # Auxiliary metadata for a MonitoredResource object. MonitoredResource objects # contain the minimum set of information to uniquely identify a monitored # resource instance. There is some other useful auxiliary metadata. Google # Stackdriver Monitoring & Logging uses an ingestion pipeline to extract # metadata for cloud resources of all types , and stores the metadata in this # message. # Corresponds to the JSON property `metadata` # @return [Google::Apis::LoggingV2beta1::MonitoredResourceMetadata] attr_accessor :metadata # Additional information about a potentially long-running operation with which a # log entry is associated. # Corresponds to the JSON property `operation` # @return [Google::Apis::LoggingV2beta1::LogEntryOperation] attr_accessor :operation # The log entry payload, represented as a protocol buffer. Some Google Cloud # Platform services use this field for their log entry payloads. # Corresponds to the JSON property `protoPayload` # @return [Hash] attr_accessor :proto_payload # Output only. The time the log entry was received by Stackdriver Logging. # Corresponds to the JSON property `receiveTimestamp` # @return [String] attr_accessor :receive_timestamp # An object representing a resource that can be used for monitoring, logging, # billing, or other purposes. Examples include virtual machine instances, # databases, and storage devices such as disks. The type field identifies a # MonitoredResourceDescriptor object that describes the resource's schema. # Information in the labels field identifies the actual resource and its # attributes according to the schema. For example, a particular Compute Engine # VM instance could be represented by the following object, because the # MonitoredResourceDescriptor for "gce_instance" has labels "instance_id" and " # zone": # ` "type": "gce_instance", # "labels": ` "instance_id": "12345678901234", # "zone": "us-central1-a" `` # Corresponds to the JSON property `resource` # @return [Google::Apis::LoggingV2beta1::MonitoredResource] attr_accessor :resource # Optional. The severity of the log entry. The default value is LogSeverity. # DEFAULT. # Corresponds to the JSON property `severity` # @return [String] attr_accessor :severity # Additional information about the source code location that produced the log # entry. # Corresponds to the JSON property `sourceLocation` # @return [Google::Apis::LoggingV2beta1::LogEntrySourceLocation] attr_accessor :source_location # Optional. The span ID within the trace associated with the log entry. For # Stackdriver Trace spans, this is the same format that the Stackdriver Trace # API v2 uses: a 16-character hexadecimal encoding of an 8-byte array, such as < # code>"000000000000004a". # Corresponds to the JSON property `spanId` # @return [String] attr_accessor :span_id # The log entry payload, represented as a Unicode string (UTF-8). # Corresponds to the JSON property `textPayload` # @return [String] attr_accessor :text_payload # Optional. The time the event described by the log entry occurred. This time is # used to compute the log entry's age and to enforce the logs retention period. # If this field is omitted in a new log entry, then Stackdriver Logging assigns # it the current time. Timestamps have nanosecond accuracy, but trailing zeros # in the fractional seconds might be omitted when the timestamp is displayed. # Incoming log entries should have timestamps that are no more than the logs # retention period in the past, and no more than 24 hours in the future. Log # entries outside those time boundaries will not be available when calling # entries.list, but those log entries can still be exported with LogSinks. # Corresponds to the JSON property `timestamp` # @return [String] attr_accessor :timestamp # Optional. Resource name of the trace associated with the log entry, if any. If # it contains a relative resource name, the name is assumed to be relative to // # tracing.googleapis.com. Example: projects/my-projectid/traces/ # 06796866738c859f2f19b7cfb3214824 # Corresponds to the JSON property `trace` # @return [String] attr_accessor :trace def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @http_request = args[:http_request] if args.key?(:http_request) @insert_id = args[:insert_id] if args.key?(:insert_id) @json_payload = args[:json_payload] if args.key?(:json_payload) @labels = args[:labels] if args.key?(:labels) @log_name = args[:log_name] if args.key?(:log_name) @metadata = args[:metadata] if args.key?(:metadata) @operation = args[:operation] if args.key?(:operation) @proto_payload = args[:proto_payload] if args.key?(:proto_payload) @receive_timestamp = args[:receive_timestamp] if args.key?(:receive_timestamp) @resource = args[:resource] if args.key?(:resource) @severity = args[:severity] if args.key?(:severity) @source_location = args[:source_location] if args.key?(:source_location) @span_id = args[:span_id] if args.key?(:span_id) @text_payload = args[:text_payload] if args.key?(:text_payload) @timestamp = args[:timestamp] if args.key?(:timestamp) @trace = args[:trace] if args.key?(:trace) end end # Additional information about a potentially long-running operation with which a # log entry is associated. class LogEntryOperation include Google::Apis::Core::Hashable # Optional. Set this to True if this is the first log entry in the operation. # Corresponds to the JSON property `first` # @return [Boolean] attr_accessor :first alias_method :first?, :first # Optional. An arbitrary operation identifier. Log entries with the same # identifier are assumed to be part of the same operation. # Corresponds to the JSON property `id` # @return [String] attr_accessor :id # Optional. Set this to True if this is the last log entry in the operation. # Corresponds to the JSON property `last` # @return [Boolean] attr_accessor :last alias_method :last?, :last # Optional. An arbitrary producer identifier. The combination of id and producer # must be globally unique. Examples for producer: "MyDivision.MyBigCompany.com", # "github.com/MyProject/MyApplication". # Corresponds to the JSON property `producer` # @return [String] attr_accessor :producer def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @first = args[:first] if args.key?(:first) @id = args[:id] if args.key?(:id) @last = args[:last] if args.key?(:last) @producer = args[:producer] if args.key?(:producer) end end # Additional information about the source code location that produced the log # entry. class LogEntrySourceLocation include Google::Apis::Core::Hashable # Optional. Source file name. Depending on the runtime environment, this might # be a simple name or a fully-qualified name. # Corresponds to the JSON property `file` # @return [String] attr_accessor :file # Optional. Human-readable name of the function or method being invoked, with # optional context such as the class or package name. This information may be # used in contexts such as the logs viewer, where a file and line number are # less meaningful. The format can vary by language. For example: qual.if.ied. # Class.method (Java), dir/package.func (Go), function (Python). # Corresponds to the JSON property `function` # @return [String] attr_accessor :function # Optional. Line within the source file. 1-based; 0 indicates no line number # available. # Corresponds to the JSON property `line` # @return [Fixnum] attr_accessor :line def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @file = args[:file] if args.key?(:file) @function = args[:function] if args.key?(:function) @line = args[:line] if args.key?(:line) end end # Application log line emitted while processing a request. class LogLine include Google::Apis::Core::Hashable # App-provided log message. # Corresponds to the JSON property `logMessage` # @return [String] attr_accessor :log_message # Severity of this log entry. # Corresponds to the JSON property `severity` # @return [String] attr_accessor :severity # Specifies a location in a source code file. # Corresponds to the JSON property `sourceLocation` # @return [Google::Apis::LoggingV2beta1::SourceLocation] attr_accessor :source_location # Approximate time when this log entry was made. # Corresponds to the JSON property `time` # @return [String] attr_accessor :time def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @log_message = args[:log_message] if args.key?(:log_message) @severity = args[:severity] if args.key?(:severity) @source_location = args[:source_location] if args.key?(:source_location) @time = args[:time] if args.key?(:time) end end # Describes a logs-based metric. The value of the metric is the number of log # entries that match a logs filter in a given time interval.Logs-based metric # can also be used to extract values from logs and create a a distribution of # the values. The distribution records the statistics of the extracted values # along with an optional histogram of the values as specified by the bucket # options. class LogMetric include Google::Apis::Core::Hashable # BucketOptions describes the bucket boundaries used to create a histogram for # the distribution. The buckets can be in a linear sequence, an exponential # sequence, or each bucket can be specified explicitly. BucketOptions does not # include the number of values in each bucket.A bucket has an inclusive lower # bound and exclusive upper bound for the values that are counted for that # bucket. The upper bound of a bucket must be strictly greater than the lower # bound. The sequence of N buckets for a distribution consists of an underflow # bucket (number 0), zero or more finite buckets (number 1 through N - 2) and an # overflow bucket (number N - 1). The buckets are contiguous: the lower bound of # bucket i (i > 0) is the same as the upper bound of bucket i - 1. The buckets # span the whole range of finite values: lower bound of the underflow bucket is - # infinity and the upper bound of the overflow bucket is +infinity. The finite # buckets are so-called because both bounds are finite. # Corresponds to the JSON property `bucketOptions` # @return [Google::Apis::LoggingV2beta1::BucketOptions] attr_accessor :bucket_options # Optional. A description of this metric, which is used in documentation. # Corresponds to the JSON property `description` # @return [String] attr_accessor :description # Required. An advanced logs filter which is used to match log entries. Example: # "resource.type=gae_app AND severity>=ERROR" # The maximum length of the filter is 20000 characters. # Corresponds to the JSON property `filter` # @return [String] attr_accessor :filter # Optional. A map from a label key string to an extractor expression which is # used to extract data from a log entry field and assign as the label value. # Each label key specified in the LabelDescriptor must have an associated # extractor expression in this map. The syntax of the extractor expression is # the same as for the value_extractor field.The extracted value is converted to # the type defined in the label descriptor. If the either the extraction or the # type conversion fails, the label will have a default value. The default value # for a string label is an empty string, for an integer label its 0, and for a # boolean label its false.Note that there are upper bounds on the maximum number # of labels and the number of active time series that are allowed in a project. # Corresponds to the JSON property `labelExtractors` # @return [Hash] attr_accessor :label_extractors # Defines a metric type and its schema. Once a metric descriptor is created, # deleting or altering it stops data collection and makes the metric type's # existing data unusable. # Corresponds to the JSON property `metricDescriptor` # @return [Google::Apis::LoggingV2beta1::MetricDescriptor] attr_accessor :metric_descriptor # Required. The client-assigned metric identifier. Examples: "error_count", " # nginx/requests".Metric identifiers are limited to 100 characters and can # include only the following characters: A-Z, a-z, 0-9, and the special # characters _-.,+!*',()%/. The forward-slash character (/) denotes a hierarchy # of name pieces, and it cannot be the first character of the name.The metric # identifier in this field must not be URL-encoded (https://en.wikipedia.org/ # wiki/Percent-encoding). However, when the metric identifier appears as the [ # METRIC_ID] part of a metric_name API parameter, then the metric identifier # must be URL-encoded. Example: "projects/my-project/metrics/nginx%2Frequests". # Corresponds to the JSON property `name` # @return [String] attr_accessor :name # Optional. A value_extractor is required when using a distribution logs-based # metric to extract the values to record from a log entry. Two functions are # supported for value extraction: EXTRACT(field) or REGEXP_EXTRACT(field, regex). # The argument are: 1. field: The name of the log entry field from which the # value is to be extracted. 2. regex: A regular expression using the Google # RE2 syntax (https://github.com/google/re2/wiki/Syntax) with a single capture # group to extract data from the specified log entry field. The value of the # field is converted to a string before applying the regex. It is an error to # specify a regex that does not include exactly one capture group.The result of # the extraction must be convertible to a double type, as the distribution # always records double values. If either the extraction or the conversion to # double fails, then those values are not recorded in the distribution.Example: # REGEXP_EXTRACT(jsonPayload.request, ".*quantity=(\d+).*") # Corresponds to the JSON property `valueExtractor` # @return [String] attr_accessor :value_extractor # Deprecated. The API version that created or updated this metric. The v2 format # is used by default and cannot be changed. # Corresponds to the JSON property `version` # @return [String] attr_accessor :version def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @bucket_options = args[:bucket_options] if args.key?(:bucket_options) @description = args[:description] if args.key?(:description) @filter = args[:filter] if args.key?(:filter) @label_extractors = args[:label_extractors] if args.key?(:label_extractors) @metric_descriptor = args[:metric_descriptor] if args.key?(:metric_descriptor) @name = args[:name] if args.key?(:name) @value_extractor = args[:value_extractor] if args.key?(:value_extractor) @version = args[:version] if args.key?(:version) end end # Describes a sink used to export log entries to one of the following # destinations in any project: a Cloud Storage bucket, a BigQuery dataset, or a # Cloud Pub/Sub topic. A logs filter controls which log entries are exported. # The sink must be created within a project, organization, billing account, or # folder. class LogSink include Google::Apis::Core::Hashable # Required. The export destination: # "storage.googleapis.com/[GCS_BUCKET]" # "bigquery.googleapis.com/projects/[PROJECT_ID]/datasets/[DATASET]" # "pubsub.googleapis.com/projects/[PROJECT_ID]/topics/[TOPIC_ID]" # The sink's writer_identity, set when the sink is created, must have permission # to write to the destination or else the log entries are not exported. For more # information, see Exporting Logs With Sinks. # Corresponds to the JSON property `destination` # @return [String] attr_accessor :destination # Deprecated. This field is ignored when creating or updating sinks. # Corresponds to the JSON property `endTime` # @return [String] attr_accessor :end_time # Optional. An advanced logs filter. The only exported log entries are those # that are in the resource owning the sink and that match the filter. For # example: # logName="projects/[PROJECT_ID]/logs/[LOG_ID]" AND severity>=ERROR # Corresponds to the JSON property `filter` # @return [String] attr_accessor :filter # Optional. This field applies only to sinks owned by organizations and folders. # If the field is false, the default, only the logs owned by the sink's parent # resource are available for export. If the field is true, then logs from all # the projects, folders, and billing accounts contained in the sink's parent # resource are also available for export. Whether a particular log entry from # the children is exported depends on the sink's filter expression. For example, # if this field is true, then the filter resource.type=gce_instance would export # all Compute Engine VM instance log entries from all projects in the sink's # parent. To only export entries from certain child projects, filter on the # project part of the log name: # logName:("projects/test-project1/" OR "projects/test-project2/") AND # resource.type=gce_instance # Corresponds to the JSON property `includeChildren` # @return [Boolean] attr_accessor :include_children alias_method :include_children?, :include_children # Required. The client-assigned sink identifier, unique within the project. # Example: "my-syslog-errors-to-pubsub". Sink identifiers are limited to 100 # characters and can include only the following characters: upper and lower-case # alphanumeric characters, underscores, hyphens, and periods. # Corresponds to the JSON property `name` # @return [String] attr_accessor :name # Deprecated. The log entry format to use for this sink's exported log entries. # The v2 format is used by default and cannot be changed. # Corresponds to the JSON property `outputVersionFormat` # @return [String] attr_accessor :output_version_format # Deprecated. This field is ignored when creating or updating sinks. # Corresponds to the JSON property `startTime` # @return [String] attr_accessor :start_time # Output only. An IAM identity—a service account or group—under # which Stackdriver Logging writes the exported log entries to the sink's # destination. This field is set by sinks.create and sinks.update, based on the # setting of unique_writer_identity in those methods.Until you grant this # identity write-access to the destination, log entry exports from this sink # will fail. For more information, see Granting access for a resource. Consult # the destination service's documentation to determine the appropriate IAM roles # to assign to the identity. # Corresponds to the JSON property `writerIdentity` # @return [String] attr_accessor :writer_identity def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @destination = args[:destination] if args.key?(:destination) @end_time = args[:end_time] if args.key?(:end_time) @filter = args[:filter] if args.key?(:filter) @include_children = args[:include_children] if args.key?(:include_children) @name = args[:name] if args.key?(:name) @output_version_format = args[:output_version_format] if args.key?(:output_version_format) @start_time = args[:start_time] if args.key?(:start_time) @writer_identity = args[:writer_identity] if args.key?(:writer_identity) end end # Defines a metric type and its schema. Once a metric descriptor is created, # deleting or altering it stops data collection and makes the metric type's # existing data unusable. class MetricDescriptor include Google::Apis::Core::Hashable # A detailed description of the metric, which can be used in documentation. # Corresponds to the JSON property `description` # @return [String] attr_accessor :description # A concise name for the metric, which can be displayed in user interfaces. Use # sentence case without an ending period, for example "Request count". This # field is optional but it is recommended to be set for any metrics associated # with user-visible concepts, such as Quota. # Corresponds to the JSON property `displayName` # @return [String] attr_accessor :display_name # The set of labels that can be used to describe a specific instance of this # metric type. For example, the appengine.googleapis.com/http/server/ # response_latencies metric type has a label for the HTTP response code, # response_code, so you can look at latencies for successful responses or just # for responses that failed. # Corresponds to the JSON property `labels` # @return [Array] attr_accessor :labels # Whether the metric records instantaneous values, changes to a value, etc. Some # combinations of metric_kind and value_type might not be supported. # Corresponds to the JSON property `metricKind` # @return [String] attr_accessor :metric_kind # The resource name of the metric descriptor. # Corresponds to the JSON property `name` # @return [String] attr_accessor :name # The metric type, including its DNS name prefix. The type is not URL-encoded. # All user-defined custom metric types have the DNS name custom.googleapis.com. # Metric types should use a natural hierarchical grouping. For example: # "custom.googleapis.com/invoice/paid/amount" # "appengine.googleapis.com/http/server/response_latencies" # Corresponds to the JSON property `type` # @return [String] attr_accessor :type # The unit in which the metric value is reported. It is only applicable if the # value_type is INT64, DOUBLE, or DISTRIBUTION. The supported units are a subset # of The Unified Code for Units of Measure (http://unitsofmeasure.org/ucum.html) # standard:Basic units (UNIT) # bit bit # By byte # s second # min minute # h hour # d dayPrefixes (PREFIX) # k kilo (10**3) # M mega (10**6) # G giga (10**9) # T tera (10**12) # P peta (10**15) # E exa (10**18) # Z zetta (10**21) # Y yotta (10**24) # m milli (10**-3) # u micro (10**-6) # n nano (10**-9) # p pico (10**-12) # f femto (10**-15) # a atto (10**-18) # z zepto (10**-21) # y yocto (10**-24) # Ki kibi (2**10) # Mi mebi (2**20) # Gi gibi (2**30) # Ti tebi (2**40)GrammarThe grammar also includes these connectors: # / division (as an infix operator, e.g. 1/s). # . multiplication (as an infix operator, e.g. GBy.d)The grammar for a unit is # as follows: # Expression = Component ` "." Component ` ` "/" Component ` ; # Component = ( [ PREFIX ] UNIT | "%" ) [ Annotation ] # | Annotation # | "1" # ; # Annotation = "`" NAME "`" ; # Notes: # Annotation is just a comment if it follows a UNIT and is equivalent to 1 if # it is used alone. For examples, `requests`/s == 1/s, By`transmitted`/s == By/ # s. # NAME is a sequence of non-blank printable ASCII characters not containing '`' # or '`'. # 1 represents dimensionless value 1, such as in 1/s. # % represents dimensionless value 1/100, and annotates values giving a # percentage. # Corresponds to the JSON property `unit` # @return [String] attr_accessor :unit # Whether the measurement is an integer, a floating-point number, etc. Some # combinations of metric_kind and value_type might not be supported. # Corresponds to the JSON property `valueType` # @return [String] attr_accessor :value_type def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @description = args[:description] if args.key?(:description) @display_name = args[:display_name] if args.key?(:display_name) @labels = args[:labels] if args.key?(:labels) @metric_kind = args[:metric_kind] if args.key?(:metric_kind) @name = args[:name] if args.key?(:name) @type = args[:type] if args.key?(:type) @unit = args[:unit] if args.key?(:unit) @value_type = args[:value_type] if args.key?(:value_type) end end # An object representing a resource that can be used for monitoring, logging, # billing, or other purposes. Examples include virtual machine instances, # databases, and storage devices such as disks. The type field identifies a # MonitoredResourceDescriptor object that describes the resource's schema. # Information in the labels field identifies the actual resource and its # attributes according to the schema. For example, a particular Compute Engine # VM instance could be represented by the following object, because the # MonitoredResourceDescriptor for "gce_instance" has labels "instance_id" and " # zone": # ` "type": "gce_instance", # "labels": ` "instance_id": "12345678901234", # "zone": "us-central1-a" `` class MonitoredResource include Google::Apis::Core::Hashable # Required. Values for all of the labels listed in the associated monitored # resource descriptor. For example, Compute Engine VM instances use the labels " # project_id", "instance_id", and "zone". # Corresponds to the JSON property `labels` # @return [Hash] attr_accessor :labels # Required. The monitored resource type. This field must match the type field of # a MonitoredResourceDescriptor object. For example, the type of a Compute # Engine VM instance is gce_instance. # Corresponds to the JSON property `type` # @return [String] attr_accessor :type def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @labels = args[:labels] if args.key?(:labels) @type = args[:type] if args.key?(:type) end end # An object that describes the schema of a MonitoredResource object using a type # name and a set of labels. For example, the monitored resource descriptor for # Google Compute Engine VM instances has a type of "gce_instance" and specifies # the use of the labels "instance_id" and "zone" to identify particular VM # instances.Different APIs can support different monitored resource types. APIs # generally provide a list method that returns the monitored resource # descriptors used by the API. class MonitoredResourceDescriptor include Google::Apis::Core::Hashable # Optional. A detailed description of the monitored resource type that might be # used in documentation. # Corresponds to the JSON property `description` # @return [String] attr_accessor :description # Optional. A concise name for the monitored resource type that might be # displayed in user interfaces. It should be a Title Cased Noun Phrase, without # any article or other determiners. For example, "Google Cloud SQL Database". # Corresponds to the JSON property `displayName` # @return [String] attr_accessor :display_name # Required. A set of labels used to describe instances of this monitored # resource type. For example, an individual Google Cloud SQL database is # identified by values for the labels "database_id" and "zone". # Corresponds to the JSON property `labels` # @return [Array] attr_accessor :labels # Optional. The resource name of the monitored resource descriptor: "projects/` # project_id`/monitoredResourceDescriptors/`type`" where `type` is the value of # the type field in this object and `project_id` is a project ID that provides # API-specific context for accessing the type. APIs that do not use project # information can use the resource name format "monitoredResourceDescriptors/` # type`". # Corresponds to the JSON property `name` # @return [String] attr_accessor :name # Required. The monitored resource type. For example, the type " # cloudsql_database" represents databases in Google Cloud SQL. The maximum # length of this value is 256 characters. # Corresponds to the JSON property `type` # @return [String] attr_accessor :type def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @description = args[:description] if args.key?(:description) @display_name = args[:display_name] if args.key?(:display_name) @labels = args[:labels] if args.key?(:labels) @name = args[:name] if args.key?(:name) @type = args[:type] if args.key?(:type) end end # Auxiliary metadata for a MonitoredResource object. MonitoredResource objects # contain the minimum set of information to uniquely identify a monitored # resource instance. There is some other useful auxiliary metadata. Google # Stackdriver Monitoring & Logging uses an ingestion pipeline to extract # metadata for cloud resources of all types , and stores the metadata in this # message. class MonitoredResourceMetadata include Google::Apis::Core::Hashable # Output only. Values for predefined system metadata labels. System labels are a # kind of metadata extracted by Google Stackdriver. Stackdriver determines what # system labels are useful and how to obtain their values. Some examples: " # machine_image", "vpc", "subnet_id", "security_group", "name", etc. System # label values can be only strings, Boolean values, or a list of strings. For # example: # ` "name": "my-test-instance", # "security_group": ["a", "b", "c"], # "spot_instance": false ` # Corresponds to the JSON property `systemLabels` # @return [Hash] attr_accessor :system_labels # Output only. A map of user-defined metadata labels. # Corresponds to the JSON property `userLabels` # @return [Hash] attr_accessor :user_labels def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @system_labels = args[:system_labels] if args.key?(:system_labels) @user_labels = args[:user_labels] if args.key?(:user_labels) end end # Complete log information about a single HTTP request to an App Engine # application. class RequestLog include Google::Apis::Core::Hashable # App Engine release version. # Corresponds to the JSON property `appEngineRelease` # @return [String] attr_accessor :app_engine_release # Application that handled this request. # Corresponds to the JSON property `appId` # @return [String] attr_accessor :app_id # An indication of the relative cost of serving this request. # Corresponds to the JSON property `cost` # @return [Float] attr_accessor :cost # Time when the request finished. # Corresponds to the JSON property `endTime` # @return [String] attr_accessor :end_time # Whether this request is finished or active. # Corresponds to the JSON property `finished` # @return [Boolean] attr_accessor :finished alias_method :finished?, :finished # Whether this is the first RequestLog entry for this request. If an active # request has several RequestLog entries written to Stackdriver Logging, then # this field will be set for one of them. # Corresponds to the JSON property `first` # @return [Boolean] attr_accessor :first alias_method :first?, :first # Internet host and port number of the resource being requested. # Corresponds to the JSON property `host` # @return [String] attr_accessor :host # HTTP version of request. Example: "HTTP/1.1". # Corresponds to the JSON property `httpVersion` # @return [String] attr_accessor :http_version # An identifier for the instance that handled the request. # Corresponds to the JSON property `instanceId` # @return [String] attr_accessor :instance_id # If the instance processing this request belongs to a manually scaled module, # then this is the 0-based index of the instance. Otherwise, this value is -1. # Corresponds to the JSON property `instanceIndex` # @return [Fixnum] attr_accessor :instance_index # Origin IP address. # Corresponds to the JSON property `ip` # @return [String] attr_accessor :ip # Latency of the request. # Corresponds to the JSON property `latency` # @return [String] attr_accessor :latency # A list of log lines emitted by the application while serving this request. # Corresponds to the JSON property `line` # @return [Array] attr_accessor :line # Number of CPU megacycles used to process request. # Corresponds to the JSON property `megaCycles` # @return [Fixnum] attr_accessor :mega_cycles # Request method. Example: "GET", "HEAD", "PUT", "POST", "DELETE". # Corresponds to the JSON property `method` # @return [String] attr_accessor :method_prop # Module of the application that handled this request. # Corresponds to the JSON property `moduleId` # @return [String] attr_accessor :module_id # The logged-in user who made the request.Most likely, this is the part of the # user's email before the @ sign. The field value is the same for different # requests from the same user, but different users can have similar names. This # information is also available to the application via the App Engine Users API. # This field will be populated starting with App Engine 1.9.21. # Corresponds to the JSON property `nickname` # @return [String] attr_accessor :nickname # Time this request spent in the pending request queue. # Corresponds to the JSON property `pendingTime` # @return [String] attr_accessor :pending_time # Referrer URL of request. # Corresponds to the JSON property `referrer` # @return [String] attr_accessor :referrer # Globally unique identifier for a request, which is based on the request start # time. Request IDs for requests which started later will compare greater as # strings than those for requests which started earlier. # Corresponds to the JSON property `requestId` # @return [String] attr_accessor :request_id # Contains the path and query portion of the URL that was requested. For example, # if the URL was "http://example.com/app?name=val", the resource would be "/app? # name=val". The fragment identifier, which is identified by the # character, is # not included. # Corresponds to the JSON property `resource` # @return [String] attr_accessor :resource # Size in bytes sent back to client by request. # Corresponds to the JSON property `responseSize` # @return [Fixnum] attr_accessor :response_size # Source code for the application that handled this request. There can be more # than one source reference per deployed application if source code is # distributed among multiple repositories. # Corresponds to the JSON property `sourceReference` # @return [Array] attr_accessor :source_reference # Time when the request started. # Corresponds to the JSON property `startTime` # @return [String] attr_accessor :start_time # HTTP response status code. Example: 200, 404. # Corresponds to the JSON property `status` # @return [Fixnum] attr_accessor :status # Task name of the request, in the case of an offline request. # Corresponds to the JSON property `taskName` # @return [String] attr_accessor :task_name # Queue name of the request, in the case of an offline request. # Corresponds to the JSON property `taskQueueName` # @return [String] attr_accessor :task_queue_name # Stackdriver Trace identifier for this request. # Corresponds to the JSON property `traceId` # @return [String] attr_accessor :trace_id # File or class that handled the request. # Corresponds to the JSON property `urlMapEntry` # @return [String] attr_accessor :url_map_entry # User agent that made the request. # Corresponds to the JSON property `userAgent` # @return [String] attr_accessor :user_agent # Version of the application that handled this request. # Corresponds to the JSON property `versionId` # @return [String] attr_accessor :version_id # Whether this was a loading request for the instance. # Corresponds to the JSON property `wasLoadingRequest` # @return [Boolean] attr_accessor :was_loading_request alias_method :was_loading_request?, :was_loading_request def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @app_engine_release = args[:app_engine_release] if args.key?(:app_engine_release) @app_id = args[:app_id] if args.key?(:app_id) @cost = args[:cost] if args.key?(:cost) @end_time = args[:end_time] if args.key?(:end_time) @finished = args[:finished] if args.key?(:finished) @first = args[:first] if args.key?(:first) @host = args[:host] if args.key?(:host) @http_version = args[:http_version] if args.key?(:http_version) @instance_id = args[:instance_id] if args.key?(:instance_id) @instance_index = args[:instance_index] if args.key?(:instance_index) @ip = args[:ip] if args.key?(:ip) @latency = args[:latency] if args.key?(:latency) @line = args[:line] if args.key?(:line) @mega_cycles = args[:mega_cycles] if args.key?(:mega_cycles) @method_prop = args[:method_prop] if args.key?(:method_prop) @module_id = args[:module_id] if args.key?(:module_id) @nickname = args[:nickname] if args.key?(:nickname) @pending_time = args[:pending_time] if args.key?(:pending_time) @referrer = args[:referrer] if args.key?(:referrer) @request_id = args[:request_id] if args.key?(:request_id) @resource = args[:resource] if args.key?(:resource) @response_size = args[:response_size] if args.key?(:response_size) @source_reference = args[:source_reference] if args.key?(:source_reference) @start_time = args[:start_time] if args.key?(:start_time) @status = args[:status] if args.key?(:status) @task_name = args[:task_name] if args.key?(:task_name) @task_queue_name = args[:task_queue_name] if args.key?(:task_queue_name) @trace_id = args[:trace_id] if args.key?(:trace_id) @url_map_entry = args[:url_map_entry] if args.key?(:url_map_entry) @user_agent = args[:user_agent] if args.key?(:user_agent) @version_id = args[:version_id] if args.key?(:version_id) @was_loading_request = args[:was_loading_request] if args.key?(:was_loading_request) end end # Specifies a location in a source code file. class SourceLocation include Google::Apis::Core::Hashable # Source file name. Depending on the runtime environment, this might be a simple # name or a fully-qualified name. # Corresponds to the JSON property `file` # @return [String] attr_accessor :file # Human-readable name of the function or method being invoked, with optional # context such as the class or package name. This information is used in # contexts such as the logs viewer, where a file and line number are less # meaningful. The format can vary by language. For example: qual.if.ied.Class. # method (Java), dir/package.func (Go), function (Python). # Corresponds to the JSON property `functionName` # @return [String] attr_accessor :function_name # Line within the source file. # Corresponds to the JSON property `line` # @return [Fixnum] attr_accessor :line def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @file = args[:file] if args.key?(:file) @function_name = args[:function_name] if args.key?(:function_name) @line = args[:line] if args.key?(:line) end end # A reference to a particular snapshot of the source tree used to build and # deploy an application. class SourceReference include Google::Apis::Core::Hashable # Optional. A URI string identifying the repository. Example: "https://github. # com/GoogleCloudPlatform/kubernetes.git" # Corresponds to the JSON property `repository` # @return [String] attr_accessor :repository # The canonical and persistent identifier of the deployed revision. Example (git) # : "0035781c50ec7aa23385dc841529ce8a4b70db1b" # Corresponds to the JSON property `revisionId` # @return [String] attr_accessor :revision_id def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @repository = args[:repository] if args.key?(:repository) @revision_id = args[:revision_id] if args.key?(:revision_id) end end # The parameters to WriteLogEntries. class WriteLogEntriesRequest include Google::Apis::Core::Hashable # Optional. If true, the request should expect normal response, but the entries # won't be persisted nor exported. Useful for checking whether the logging API # endpoints are working properly before sending valuable data. # Corresponds to the JSON property `dryRun` # @return [Boolean] attr_accessor :dry_run alias_method :dry_run?, :dry_run # Required. The log entries to send to Stackdriver Logging. The order of log # entries in this list does not matter. Values supplied in this method's # log_name, resource, and labels fields are copied into those log entries in # this list that do not include values for their corresponding fields. For more # information, see the LogEntry type.If the timestamp or insert_id fields are # missing in log entries, then this method supplies the current time or a unique # identifier, respectively. The supplied values are chosen so that, among the # log entries that did not supply their own values, the entries earlier in the # list will sort before the entries later in the list. See the entries.list # method.Log entries with timestamps that are more than the logs retention # period in the past or more than 24 hours in the future will not be available # when calling entries.list. However, those log entries can still be exported # with LogSinks.To improve throughput and to avoid exceeding the quota limit for # calls to entries.write, you should try to include several log entries in this # list, rather than calling this method for each individual log entry. # Corresponds to the JSON property `entries` # @return [Array] attr_accessor :entries # Optional. Default labels that are added to the labels field of all log entries # in entries. If a log entry already has a label with the same key as a label in # this parameter, then the log entry's label is not changed. See LogEntry. # Corresponds to the JSON property `labels` # @return [Hash] attr_accessor :labels # Optional. A default log resource name that is assigned to all log entries in # entries that do not specify a value for log_name: # "projects/[PROJECT_ID]/logs/[LOG_ID]" # "organizations/[ORGANIZATION_ID]/logs/[LOG_ID]" # "billingAccounts/[BILLING_ACCOUNT_ID]/logs/[LOG_ID]" # "folders/[FOLDER_ID]/logs/[LOG_ID]" # [LOG_ID] must be URL-encoded. For example, "projects/my-project-id/logs/syslog" # or "organizations/1234567890/logs/cloudresourcemanager.googleapis.com% # 2Factivity". For more information about log names, see LogEntry. # Corresponds to the JSON property `logName` # @return [String] attr_accessor :log_name # Optional. Whether valid entries should be written even if some other entries # fail due to INVALID_ARGUMENT or PERMISSION_DENIED errors. If any entry is not # written, then the response status is the error associated with one of the # failed entries and the response includes error details keyed by the entries' # zero-based index in the entries.write method. # Corresponds to the JSON property `partialSuccess` # @return [Boolean] attr_accessor :partial_success alias_method :partial_success?, :partial_success # An object representing a resource that can be used for monitoring, logging, # billing, or other purposes. Examples include virtual machine instances, # databases, and storage devices such as disks. The type field identifies a # MonitoredResourceDescriptor object that describes the resource's schema. # Information in the labels field identifies the actual resource and its # attributes according to the schema. For example, a particular Compute Engine # VM instance could be represented by the following object, because the # MonitoredResourceDescriptor for "gce_instance" has labels "instance_id" and " # zone": # ` "type": "gce_instance", # "labels": ` "instance_id": "12345678901234", # "zone": "us-central1-a" `` # Corresponds to the JSON property `resource` # @return [Google::Apis::LoggingV2beta1::MonitoredResource] attr_accessor :resource def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @dry_run = args[:dry_run] if args.key?(:dry_run) @entries = args[:entries] if args.key?(:entries) @labels = args[:labels] if args.key?(:labels) @log_name = args[:log_name] if args.key?(:log_name) @partial_success = args[:partial_success] if args.key?(:partial_success) @resource = args[:resource] if args.key?(:resource) end end # Result returned from WriteLogEntries. empty class WriteLogEntriesResponse include Google::Apis::Core::Hashable def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) end end end end end