# Copyright 2020 Google LLC # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. require 'date' require 'google/apis/core/base_service' require 'google/apis/core/json_representation' require 'google/apis/core/hashable' require 'google/apis/errors' module Google module Apis module AccesscontextmanagerV1 # An `AccessLevel` is a label that can be applied to requests to Google Cloud # services, along with a list of requirements necessary for the label to be # applied. class AccessLevel include Google::Apis::Core::Hashable # `BasicLevel` is an `AccessLevel` using a set of recommended features. # Corresponds to the JSON property `basic` # @return [Google::Apis::AccesscontextmanagerV1::BasicLevel] attr_accessor :basic # `CustomLevel` is an `AccessLevel` using the Cloud Common Expression Language # to represent the necessary conditions for the level to apply to a request. See # CEL spec at: https://github.com/google/cel-spec # Corresponds to the JSON property `custom` # @return [Google::Apis::AccesscontextmanagerV1::CustomLevel] attr_accessor :custom # Description of the `AccessLevel` and its use. Does not affect behavior. # Corresponds to the JSON property `description` # @return [String] attr_accessor :description # Required. Resource name for the Access Level. The `short_name` component must # begin with a letter and only include alphanumeric and '_'. Format: ` # accessPolicies/`policy_id`/accessLevels/`short_name``. The maximum length of # the `short_name` component is 50 characters. # Corresponds to the JSON property `name` # @return [String] attr_accessor :name # Human readable title. Must be unique within the Policy. # Corresponds to the JSON property `title` # @return [String] attr_accessor :title def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @basic = args[:basic] if args.key?(:basic) @custom = args[:custom] if args.key?(:custom) @description = args[:description] if args.key?(:description) @name = args[:name] if args.key?(:name) @title = args[:title] if args.key?(:title) end end # `AccessPolicy` is a container for `AccessLevels` (which define the necessary # attributes to use Google Cloud services) and `ServicePerimeters` (which define # regions of services able to freely pass data within a perimeter). An access # policy is globally visible within an organization, and the restrictions it # specifies apply to all projects within an organization. class AccessPolicy include Google::Apis::Core::Hashable # Output only. An opaque identifier for the current version of the `AccessPolicy` # . This will always be a strongly validated etag, meaning that two Access # Polices will be identical if and only if their etags are identical. Clients # should not expect this to be in any specific format. # Corresponds to the JSON property `etag` # @return [String] attr_accessor :etag # Output only. Resource name of the `AccessPolicy`. Format: `accessPolicies/` # policy_id`` # Corresponds to the JSON property `name` # @return [String] attr_accessor :name # Required. The parent of this `AccessPolicy` in the Cloud Resource Hierarchy. # Currently immutable once created. Format: `organizations/`organization_id`` # Corresponds to the JSON property `parent` # @return [String] attr_accessor :parent # Required. Human readable title. Does not affect behavior. # Corresponds to the JSON property `title` # @return [String] attr_accessor :title def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @etag = args[:etag] if args.key?(:etag) @name = args[:name] if args.key?(:name) @parent = args[:parent] if args.key?(:parent) @title = args[:title] if args.key?(:title) end end # Identification for an API Operation. class ApiOperation include Google::Apis::Core::Hashable # API methods or permissions to allow. Method or permission must belong to the # service specified by `service_name` field. A single MethodSelector entry with ` # *` specified for the `method` field will allow all methods AND permissions for # the service specified in `service_name`. # Corresponds to the JSON property `methodSelectors` # @return [Array] attr_accessor :method_selectors # The name of the API whose methods or permissions the IngressPolicy or # EgressPolicy want to allow. A single ApiOperation with `service_name` field # set to `*` will allow all methods AND permissions for all services. # Corresponds to the JSON property `serviceName` # @return [String] attr_accessor :service_name def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @method_selectors = args[:method_selectors] if args.key?(:method_selectors) @service_name = args[:service_name] if args.key?(:service_name) end end # `BasicLevel` is an `AccessLevel` using a set of recommended features. class BasicLevel include Google::Apis::Core::Hashable # How the `conditions` list should be combined to determine if a request is # granted this `AccessLevel`. If AND is used, each `Condition` in `conditions` # must be satisfied for the `AccessLevel` to be applied. If OR is used, at least # one `Condition` in `conditions` must be satisfied for the `AccessLevel` to be # applied. Default behavior is AND. # Corresponds to the JSON property `combiningFunction` # @return [String] attr_accessor :combining_function # Required. A list of requirements for the `AccessLevel` to be granted. # Corresponds to the JSON property `conditions` # @return [Array] attr_accessor :conditions def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @combining_function = args[:combining_function] if args.key?(:combining_function) @conditions = args[:conditions] if args.key?(:conditions) end end # The request message for Operations.CancelOperation. class CancelOperationRequest include Google::Apis::Core::Hashable def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) end end # A request to commit dry-run specs in all Service Perimeters belonging to an # Access Policy. class CommitServicePerimetersRequest include Google::Apis::Core::Hashable # Optional. The etag for the version of the Access Policy that this commit # operation is to be performed on. If, at the time of commit, the etag for the # Access Policy stored in Access Context Manager is different from the specified # etag, then the commit operation will not be performed and the call will fail. # This field is not required. If etag is not provided, the operation will be # performed as if a valid etag is provided. # Corresponds to the JSON property `etag` # @return [String] attr_accessor :etag def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @etag = args[:etag] if args.key?(:etag) end end # A response to CommitServicePerimetersRequest. This will be put inside of # Operation.response field. class CommitServicePerimetersResponse include Google::Apis::Core::Hashable # List of all the Service Perimeter instances in the Access Policy. # Corresponds to the JSON property `servicePerimeters` # @return [Array] attr_accessor :service_perimeters def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @service_perimeters = args[:service_perimeters] if args.key?(:service_perimeters) end end # A condition necessary for an `AccessLevel` to be granted. The Condition is an # AND over its fields. So a Condition is true if: 1) the request IP is from one # of the listed subnetworks AND 2) the originating device complies with the # listed device policy AND 3) all listed access levels are granted AND 4) the # request was sent at a time allowed by the DateTimeRestriction. class Condition include Google::Apis::Core::Hashable # `DevicePolicy` specifies device specific restrictions necessary to acquire a # given access level. A `DevicePolicy` specifies requirements for requests from # devices to be granted access levels, it does not do any enforcement on the # device. `DevicePolicy` acts as an AND over all specified fields, and each # repeated field is an OR over its elements. Any unset fields are ignored. For # example, if the proto is ` os_type : DESKTOP_WINDOWS, os_type : DESKTOP_LINUX, # encryption_status: ENCRYPTED`, then the DevicePolicy will be true for requests # originating from encrypted Linux desktops and encrypted Windows desktops. # Corresponds to the JSON property `devicePolicy` # @return [Google::Apis::AccesscontextmanagerV1::DevicePolicy] attr_accessor :device_policy # CIDR block IP subnetwork specification. May be IPv4 or IPv6. Note that for a # CIDR IP address block, the specified IP address portion must be properly # truncated (i.e. all the host bits must be zero) or the input is considered # malformed. For example, "192.0.2.0/24" is accepted but "192.0.2.1/24" is not. # Similarly, for IPv6, "2001:db8::/32" is accepted whereas "2001:db8::1/32" is # not. The originating IP of a request must be in one of the listed subnets in # order for this Condition to be true. If empty, all IP addresses are allowed. # Corresponds to the JSON property `ipSubnetworks` # @return [Array] attr_accessor :ip_subnetworks # The request must be made by one of the provided user or service accounts. # Groups are not supported. Syntax: `user:`emailid`` `serviceAccount:`emailid`` # If not specified, a request may come from any user. # Corresponds to the JSON property `members` # @return [Array] attr_accessor :members # Whether to negate the Condition. If true, the Condition becomes a NAND over # its non-empty fields, each field must be false for the Condition overall to be # satisfied. Defaults to false. # Corresponds to the JSON property `negate` # @return [Boolean] attr_accessor :negate alias_method :negate?, :negate # The request must originate from one of the provided countries/regions. Must be # valid ISO 3166-1 alpha-2 codes. # Corresponds to the JSON property `regions` # @return [Array] attr_accessor :regions # A list of other access levels defined in the same `Policy`, referenced by # resource name. Referencing an `AccessLevel` which does not exist is an error. # All access levels listed must be granted for the Condition to be true. Example: # "`accessPolicies/MY_POLICY/accessLevels/LEVEL_NAME"` # Corresponds to the JSON property `requiredAccessLevels` # @return [Array] attr_accessor :required_access_levels def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @device_policy = args[:device_policy] if args.key?(:device_policy) @ip_subnetworks = args[:ip_subnetworks] if args.key?(:ip_subnetworks) @members = args[:members] if args.key?(:members) @negate = args[:negate] if args.key?(:negate) @regions = args[:regions] if args.key?(:regions) @required_access_levels = args[:required_access_levels] if args.key?(:required_access_levels) end end # `CustomLevel` is an `AccessLevel` using the Cloud Common Expression Language # to represent the necessary conditions for the level to apply to a request. See # CEL spec at: https://github.com/google/cel-spec class CustomLevel include Google::Apis::Core::Hashable # Represents a textual expression in the Common Expression Language (CEL) syntax. # CEL is a C-like expression language. The syntax and semantics of CEL are # documented at https://github.com/google/cel-spec. Example (Comparison): title: # "Summary size limit" description: "Determines if a summary is less than 100 # chars" expression: "document.summary.size() < 100" Example (Equality): title: " # Requestor is owner" description: "Determines if requestor is the document # owner" expression: "document.owner == request.auth.claims.email" Example ( # Logic): title: "Public documents" description: "Determine whether the document # should be publicly visible" expression: "document.type != 'private' && # document.type != 'internal'" Example (Data Manipulation): title: "Notification # string" description: "Create a notification string with a timestamp." # expression: "'New message received at ' + string(document.create_time)" The # exact variables and functions that may be referenced within an expression are # determined by the service that evaluates it. See the service documentation for # additional information. # Corresponds to the JSON property `expr` # @return [Google::Apis::AccesscontextmanagerV1::Expr] attr_accessor :expr def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @expr = args[:expr] if args.key?(:expr) end end # `DevicePolicy` specifies device specific restrictions necessary to acquire a # given access level. A `DevicePolicy` specifies requirements for requests from # devices to be granted access levels, it does not do any enforcement on the # device. `DevicePolicy` acts as an AND over all specified fields, and each # repeated field is an OR over its elements. Any unset fields are ignored. For # example, if the proto is ` os_type : DESKTOP_WINDOWS, os_type : DESKTOP_LINUX, # encryption_status: ENCRYPTED`, then the DevicePolicy will be true for requests # originating from encrypted Linux desktops and encrypted Windows desktops. class DevicePolicy include Google::Apis::Core::Hashable # Allowed device management levels, an empty list allows all management levels. # Corresponds to the JSON property `allowedDeviceManagementLevels` # @return [Array] attr_accessor :allowed_device_management_levels # Allowed encryptions statuses, an empty list allows all statuses. # Corresponds to the JSON property `allowedEncryptionStatuses` # @return [Array] attr_accessor :allowed_encryption_statuses # Allowed OS versions, an empty list allows all types and all versions. # Corresponds to the JSON property `osConstraints` # @return [Array] attr_accessor :os_constraints # Whether the device needs to be approved by the customer admin. # Corresponds to the JSON property `requireAdminApproval` # @return [Boolean] attr_accessor :require_admin_approval alias_method :require_admin_approval?, :require_admin_approval # Whether the device needs to be corp owned. # Corresponds to the JSON property `requireCorpOwned` # @return [Boolean] attr_accessor :require_corp_owned alias_method :require_corp_owned?, :require_corp_owned # Whether or not screenlock is required for the DevicePolicy to be true. # Defaults to `false`. # Corresponds to the JSON property `requireScreenlock` # @return [Boolean] attr_accessor :require_screenlock alias_method :require_screenlock?, :require_screenlock def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @allowed_device_management_levels = args[:allowed_device_management_levels] if args.key?(:allowed_device_management_levels) @allowed_encryption_statuses = args[:allowed_encryption_statuses] if args.key?(:allowed_encryption_statuses) @os_constraints = args[:os_constraints] if args.key?(:os_constraints) @require_admin_approval = args[:require_admin_approval] if args.key?(:require_admin_approval) @require_corp_owned = args[:require_corp_owned] if args.key?(:require_corp_owned) @require_screenlock = args[:require_screenlock] if args.key?(:require_screenlock) end end # Defines the conditions under which an EgressPolicy matches a request. # Conditions based on information about the source of the request. Note that if # the destination of the request is protected by a ServicePerimeter, then that # ServicePerimeter must have an IngressPolicy which allows access in order for # this request to succeed. class EgressFrom include Google::Apis::Core::Hashable # A list of identities that are allowed access through this [EgressPolicy]. # Should be in the format of email address. The email address should represent # individual user or service account only. # Corresponds to the JSON property `identities` # @return [Array] attr_accessor :identities # Specifies the type of identities that are allowed access to outside the # perimeter. If left unspecified, then members of `identities` field will be # allowed access. # Corresponds to the JSON property `identityType` # @return [String] attr_accessor :identity_type def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @identities = args[:identities] if args.key?(:identities) @identity_type = args[:identity_type] if args.key?(:identity_type) end end # Policy for egress from perimeter. EgressPolicies match requests based on ` # egress_from` and `egress_to` stanzas. For an EgressPolicy to match, both ` # egress_from` and `egress_to` stanzas must be matched. If an EgressPolicy # matches a request, the request is allowed to span the ServicePerimeter # boundary. For example, an EgressPolicy can be used to allow VMs on networks # within the ServicePerimeter to access a defined set of projects outside the # perimeter in certain contexts (e.g. to read data from a Cloud Storage bucket # or query against a BigQuery dataset). EgressPolicies are concerned with the * # resources* that a request relates as well as the API services and API actions # being used. They do not related to the direction of data movement. More # detailed documentation for this concept can be found in the descriptions of # EgressFrom and EgressTo. class EgressPolicy include Google::Apis::Core::Hashable # Defines the conditions under which an EgressPolicy matches a request. # Conditions based on information about the source of the request. Note that if # the destination of the request is protected by a ServicePerimeter, then that # ServicePerimeter must have an IngressPolicy which allows access in order for # this request to succeed. # Corresponds to the JSON property `egressFrom` # @return [Google::Apis::AccesscontextmanagerV1::EgressFrom] attr_accessor :egress_from # Defines the conditions under which an EgressPolicy matches a request. # Conditions are based on information about the ApiOperation intended to be # performed on the `resources` specified. Note that if the destination of the # request is protected by a ServicePerimeter, then that ServicePerimeter must # have an IngressPolicy which allows access in order for this request to succeed. # Corresponds to the JSON property `egressTo` # @return [Google::Apis::AccesscontextmanagerV1::EgressTo] attr_accessor :egress_to def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @egress_from = args[:egress_from] if args.key?(:egress_from) @egress_to = args[:egress_to] if args.key?(:egress_to) end end # Defines the conditions under which an EgressPolicy matches a request. # Conditions are based on information about the ApiOperation intended to be # performed on the `resources` specified. Note that if the destination of the # request is protected by a ServicePerimeter, then that ServicePerimeter must # have an IngressPolicy which allows access in order for this request to succeed. class EgressTo include Google::Apis::Core::Hashable # A list of ApiOperations that this egress rule applies to. A request matches if # it contains an operation/service in this list. # Corresponds to the JSON property `operations` # @return [Array] attr_accessor :operations # A list of resources, currently only projects in the form `projects/`, that # match this to stanza. A request matches if it contains a resource in this list. # If `*` is specified for resources, then this EgressTo rule will authorize # access to all resources outside the perimeter. # Corresponds to the JSON property `resources` # @return [Array] attr_accessor :resources def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @operations = args[:operations] if args.key?(:operations) @resources = args[:resources] if args.key?(:resources) end end # A generic empty message that you can re-use to avoid defining duplicated empty # messages in your APIs. A typical example is to use it as the request or the # response type of an API method. For instance: service Foo ` rpc Bar(google. # protobuf.Empty) returns (google.protobuf.Empty); ` The JSON representation for # `Empty` is empty JSON object ````. class Empty include Google::Apis::Core::Hashable def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) end end # Represents a textual expression in the Common Expression Language (CEL) syntax. # CEL is a C-like expression language. The syntax and semantics of CEL are # documented at https://github.com/google/cel-spec. Example (Comparison): title: # "Summary size limit" description: "Determines if a summary is less than 100 # chars" expression: "document.summary.size() < 100" Example (Equality): title: " # Requestor is owner" description: "Determines if requestor is the document # owner" expression: "document.owner == request.auth.claims.email" Example ( # Logic): title: "Public documents" description: "Determine whether the document # should be publicly visible" expression: "document.type != 'private' && # document.type != 'internal'" Example (Data Manipulation): title: "Notification # string" description: "Create a notification string with a timestamp." # expression: "'New message received at ' + string(document.create_time)" The # exact variables and functions that may be referenced within an expression are # determined by the service that evaluates it. See the service documentation for # additional information. class Expr include Google::Apis::Core::Hashable # Optional. Description of the expression. This is a longer text which describes # the expression, e.g. when hovered over it in a UI. # Corresponds to the JSON property `description` # @return [String] attr_accessor :description # Textual representation of an expression in Common Expression Language syntax. # Corresponds to the JSON property `expression` # @return [String] attr_accessor :expression # Optional. String indicating the location of the expression for error reporting, # e.g. a file name and a position in the file. # Corresponds to the JSON property `location` # @return [String] attr_accessor :location # Optional. Title for the expression, i.e. a short string describing its purpose. # This can be used e.g. in UIs which allow to enter the expression. # Corresponds to the JSON property `title` # @return [String] attr_accessor :title def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @description = args[:description] if args.key?(:description) @expression = args[:expression] if args.key?(:expression) @location = args[:location] if args.key?(:location) @title = args[:title] if args.key?(:title) end end # Restricts access to Cloud Console and Google Cloud APIs for a set of users # using Context-Aware Access. class GcpUserAccessBinding include Google::Apis::Core::Hashable # Required. Access level that a user must have to be granted access. Only one # access level is supported, not multiple. This repeated field must have exactly # one element. Example: "accessPolicies/9522/accessLevels/device_trusted" # Corresponds to the JSON property `accessLevels` # @return [Array] attr_accessor :access_levels # Required. Immutable. Google Group id whose members are subject to this binding' # s restrictions. See "id" in the [G Suite Directory API's Groups resource] ( # https://developers.google.com/admin-sdk/directory/v1/reference/groups#resource) # . If a group's email address/alias is changed, this resource will continue to # point at the changed group. This field does not accept group email addresses # or aliases. Example: "01d520gv4vjcrht" # Corresponds to the JSON property `groupKey` # @return [String] attr_accessor :group_key # Immutable. Assigned by the server during creation. The last segment has an # arbitrary length and has only URI unreserved characters (as defined by [RFC # 3986 Section 2.3](https://tools.ietf.org/html/rfc3986#section-2.3)). Should # not be specified by the client during creation. Example: "organizations/256/ # gcpUserAccessBindings/b3-BhcX_Ud5N" # Corresponds to the JSON property `name` # @return [String] attr_accessor :name def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @access_levels = args[:access_levels] if args.key?(:access_levels) @group_key = args[:group_key] if args.key?(:group_key) @name = args[:name] if args.key?(:name) end end # Defines the conditions under which an IngressPolicy matches a request. # Conditions are based on information about the source of the request. class IngressFrom include Google::Apis::Core::Hashable # A list of identities that are allowed access through this ingress policy. # Should be in the format of email address. The email address should represent # individual user or service account only. # Corresponds to the JSON property `identities` # @return [Array] attr_accessor :identities # Specifies the type of identities that are allowed access from outside the # perimeter. If left unspecified, then members of `identities` field will be # allowed access. # Corresponds to the JSON property `identityType` # @return [String] attr_accessor :identity_type # Sources that this IngressPolicy authorizes access from. # Corresponds to the JSON property `sources` # @return [Array] attr_accessor :sources def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @identities = args[:identities] if args.key?(:identities) @identity_type = args[:identity_type] if args.key?(:identity_type) @sources = args[:sources] if args.key?(:sources) end end # Policy for ingress into ServicePerimeter. IngressPolicies match requests based # on `ingress_from` and `ingress_to` stanzas. For an ingress policy to match, # both the `ingress_from` and `ingress_to` stanzas must be matched. If an # IngressPolicy matches a request, the request is allowed through the perimeter # boundary from outside the perimeter. For example, access from the internet can # be allowed either based on an AccessLevel or, for traffic hosted on Google # Cloud, the project of the source network. For access from private networks, # using the project of the hosting network is required. Individual ingress # policies can be limited by restricting which services and/or actions they # match using the `ingress_to` field. class IngressPolicy include Google::Apis::Core::Hashable # Defines the conditions under which an IngressPolicy matches a request. # Conditions are based on information about the source of the request. # Corresponds to the JSON property `ingressFrom` # @return [Google::Apis::AccesscontextmanagerV1::IngressFrom] attr_accessor :ingress_from # Defines the conditions under which an IngressPolicy matches a request. # Conditions are based on information about the ApiOperation intended to be # performed on the destination of the request. # Corresponds to the JSON property `ingressTo` # @return [Google::Apis::AccesscontextmanagerV1::IngressTo] attr_accessor :ingress_to def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @ingress_from = args[:ingress_from] if args.key?(:ingress_from) @ingress_to = args[:ingress_to] if args.key?(:ingress_to) end end # The source that IngressPolicy authorizes access from. class IngressSource include Google::Apis::Core::Hashable # An AccessLevel resource name that allow resources within the ServicePerimeters # to be accessed from the internet. AccessLevels listed must be in the same # policy as this ServicePerimeter. Referencing a nonexistent AccessLevel will # cause an error. If no AccessLevel names are listed, resources within the # perimeter can only be accessed via Google Cloud calls with request origins # within the perimeter. Example: `accessPolicies/MY_POLICY/accessLevels/MY_LEVEL` # . If `*` is specified, then all IngressSources will be allowed. # Corresponds to the JSON property `accessLevel` # @return [String] attr_accessor :access_level # A Google Cloud resource that is allowed to ingress the perimeter. Requests # from these resources will be allowed to access perimeter data. Currently only # projects are allowed. Format: `projects/`project_number`` The project may be # in any Google Cloud organization, not just the organization that the perimeter # is defined in. `*` is not allowed, the case of allowing all Google Cloud # resources only is not supported. # Corresponds to the JSON property `resource` # @return [String] attr_accessor :resource def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @access_level = args[:access_level] if args.key?(:access_level) @resource = args[:resource] if args.key?(:resource) end end # Defines the conditions under which an IngressPolicy matches a request. # Conditions are based on information about the ApiOperation intended to be # performed on the destination of the request. class IngressTo include Google::Apis::Core::Hashable # A list of ApiOperations the sources specified in corresponding IngressFrom are # allowed to perform in this ServicePerimeter. # Corresponds to the JSON property `operations` # @return [Array] attr_accessor :operations # A list of resources, currently only projects in the form `projects/`, # protected by this ServicePerimeter that are allowed to be accessed by sources # defined in the corresponding IngressFrom. A request matches if it contains a # resource in this list. If `*` is specified for resources, then this IngressTo # rule will authorize access to all resources inside the perimeter, provided # that the request also matches the `operations` field. # Corresponds to the JSON property `resources` # @return [Array] attr_accessor :resources def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @operations = args[:operations] if args.key?(:operations) @resources = args[:resources] if args.key?(:resources) end end # A response to `ListAccessLevelsRequest`. class ListAccessLevelsResponse include Google::Apis::Core::Hashable # List of the Access Level instances. # Corresponds to the JSON property `accessLevels` # @return [Array] attr_accessor :access_levels # The pagination token to retrieve the next page of results. If the value is # empty, no further results remain. # Corresponds to the JSON property `nextPageToken` # @return [String] attr_accessor :next_page_token def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @access_levels = args[:access_levels] if args.key?(:access_levels) @next_page_token = args[:next_page_token] if args.key?(:next_page_token) end end # A response to `ListAccessPoliciesRequest`. class ListAccessPoliciesResponse include Google::Apis::Core::Hashable # List of the AccessPolicy instances. # Corresponds to the JSON property `accessPolicies` # @return [Array] attr_accessor :access_policies # The pagination token to retrieve the next page of results. If the value is # empty, no further results remain. # Corresponds to the JSON property `nextPageToken` # @return [String] attr_accessor :next_page_token def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @access_policies = args[:access_policies] if args.key?(:access_policies) @next_page_token = args[:next_page_token] if args.key?(:next_page_token) end end # Response of ListGcpUserAccessBindings. class ListGcpUserAccessBindingsResponse include Google::Apis::Core::Hashable # GcpUserAccessBinding # Corresponds to the JSON property `gcpUserAccessBindings` # @return [Array] attr_accessor :gcp_user_access_bindings # Token to get the next page of items. If blank, there are no more items. # Corresponds to the JSON property `nextPageToken` # @return [String] attr_accessor :next_page_token def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @gcp_user_access_bindings = args[:gcp_user_access_bindings] if args.key?(:gcp_user_access_bindings) @next_page_token = args[:next_page_token] if args.key?(:next_page_token) end end # The response message for Operations.ListOperations. class ListOperationsResponse include Google::Apis::Core::Hashable # The standard List next-page token. # Corresponds to the JSON property `nextPageToken` # @return [String] attr_accessor :next_page_token # A list of operations that matches the specified filter in the request. # Corresponds to the JSON property `operations` # @return [Array] attr_accessor :operations def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @next_page_token = args[:next_page_token] if args.key?(:next_page_token) @operations = args[:operations] if args.key?(:operations) end end # A response to `ListServicePerimetersRequest`. class ListServicePerimetersResponse include Google::Apis::Core::Hashable # The pagination token to retrieve the next page of results. If the value is # empty, no further results remain. # Corresponds to the JSON property `nextPageToken` # @return [String] attr_accessor :next_page_token # List of the Service Perimeter instances. # Corresponds to the JSON property `servicePerimeters` # @return [Array] attr_accessor :service_perimeters def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @next_page_token = args[:next_page_token] if args.key?(:next_page_token) @service_perimeters = args[:service_perimeters] if args.key?(:service_perimeters) end end # An allowed method or permission of a service specified in ApiOperation. class MethodSelector include Google::Apis::Core::Hashable # Value for `method` should be a valid method name for the corresponding ` # service_name` in ApiOperation. If `*` used as value for `method`, then ALL # methods and permissions are allowed. # Corresponds to the JSON property `method` # @return [String] attr_accessor :method_prop # Value for `permission` should be a valid Cloud IAM permission for the # corresponding `service_name` in ApiOperation. # Corresponds to the JSON property `permission` # @return [String] attr_accessor :permission def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @method_prop = args[:method_prop] if args.key?(:method_prop) @permission = args[:permission] if args.key?(:permission) end end # This resource represents a long-running operation that is the result of a # network API call. class Operation include Google::Apis::Core::Hashable # If the value is `false`, it means the operation is still in progress. If `true` # , the operation is completed, and either `error` or `response` is available. # Corresponds to the JSON property `done` # @return [Boolean] attr_accessor :done alias_method :done?, :done # The `Status` type defines a logical error model that is suitable for different # programming environments, including REST APIs and RPC APIs. It is used by [ # gRPC](https://github.com/grpc). Each `Status` message contains three pieces of # data: error code, error message, and error details. You can find out more # about this error model and how to work with it in the [API Design Guide](https: # //cloud.google.com/apis/design/errors). # Corresponds to the JSON property `error` # @return [Google::Apis::AccesscontextmanagerV1::Status] attr_accessor :error # Service-specific metadata associated with the operation. It typically contains # progress information and common metadata such as create time. Some services # might not provide such metadata. Any method that returns a long-running # operation should document the metadata type, if any. # Corresponds to the JSON property `metadata` # @return [Hash] attr_accessor :metadata # The server-assigned name, which is only unique within the same service that # originally returns it. If you use the default HTTP mapping, the `name` should # be a resource name ending with `operations/`unique_id``. # Corresponds to the JSON property `name` # @return [String] attr_accessor :name # The normal response of the operation in case of success. If the original # method returns no data on success, such as `Delete`, the response is `google. # protobuf.Empty`. If the original method is standard `Get`/`Create`/`Update`, # the response should be the resource. For other methods, the response should # have the type `XxxResponse`, where `Xxx` is the original method name. For # example, if the original method name is `TakeSnapshot()`, the inferred # response type is `TakeSnapshotResponse`. # Corresponds to the JSON property `response` # @return [Hash] attr_accessor :response def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @done = args[:done] if args.key?(:done) @error = args[:error] if args.key?(:error) @metadata = args[:metadata] if args.key?(:metadata) @name = args[:name] if args.key?(:name) @response = args[:response] if args.key?(:response) end end # A restriction on the OS type and version of devices making requests. class OsConstraint include Google::Apis::Core::Hashable # The minimum allowed OS version. If not set, any version of this OS satisfies # the constraint. Format: `"major.minor.patch"`. Examples: `"10.5.301"`, `"9.2.1" # `. # Corresponds to the JSON property `minimumVersion` # @return [String] attr_accessor :minimum_version # Required. The allowed OS type. # Corresponds to the JSON property `osType` # @return [String] attr_accessor :os_type # Only allows requests from devices with a verified Chrome OS. Verifications # includes requirements that the device is enterprise-managed, conformant to # domain policies, and the caller has permission to call the API targeted by the # request. # Corresponds to the JSON property `requireVerifiedChromeOs` # @return [Boolean] attr_accessor :require_verified_chrome_os alias_method :require_verified_chrome_os?, :require_verified_chrome_os def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @minimum_version = args[:minimum_version] if args.key?(:minimum_version) @os_type = args[:os_type] if args.key?(:os_type) @require_verified_chrome_os = args[:require_verified_chrome_os] if args.key?(:require_verified_chrome_os) end end # A request to replace all existing Access Levels in an Access Policy with the # Access Levels provided. This is done atomically. class ReplaceAccessLevelsRequest include Google::Apis::Core::Hashable # Required. The desired Access Levels that should replace all existing Access # Levels in the Access Policy. # Corresponds to the JSON property `accessLevels` # @return [Array] attr_accessor :access_levels # Optional. The etag for the version of the Access Policy that this replace # operation is to be performed on. If, at the time of replace, the etag for the # Access Policy stored in Access Context Manager is different from the specified # etag, then the replace operation will not be performed and the call will fail. # This field is not required. If etag is not provided, the operation will be # performed as if a valid etag is provided. # Corresponds to the JSON property `etag` # @return [String] attr_accessor :etag def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @access_levels = args[:access_levels] if args.key?(:access_levels) @etag = args[:etag] if args.key?(:etag) end end # A response to ReplaceAccessLevelsRequest. This will be put inside of Operation. # response field. class ReplaceAccessLevelsResponse include Google::Apis::Core::Hashable # List of the Access Level instances. # Corresponds to the JSON property `accessLevels` # @return [Array] attr_accessor :access_levels def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @access_levels = args[:access_levels] if args.key?(:access_levels) end end # A request to replace all existing Service Perimeters in an Access Policy with # the Service Perimeters provided. This is done atomically. class ReplaceServicePerimetersRequest include Google::Apis::Core::Hashable # Optional. The etag for the version of the Access Policy that this replace # operation is to be performed on. If, at the time of replace, the etag for the # Access Policy stored in Access Context Manager is different from the specified # etag, then the replace operation will not be performed and the call will fail. # This field is not required. If etag is not provided, the operation will be # performed as if a valid etag is provided. # Corresponds to the JSON property `etag` # @return [String] attr_accessor :etag # Required. The desired Service Perimeters that should replace all existing # Service Perimeters in the Access Policy. # Corresponds to the JSON property `servicePerimeters` # @return [Array] attr_accessor :service_perimeters def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @etag = args[:etag] if args.key?(:etag) @service_perimeters = args[:service_perimeters] if args.key?(:service_perimeters) end end # A response to ReplaceServicePerimetersRequest. This will be put inside of # Operation.response field. class ReplaceServicePerimetersResponse include Google::Apis::Core::Hashable # List of the Service Perimeter instances. # Corresponds to the JSON property `servicePerimeters` # @return [Array] attr_accessor :service_perimeters def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @service_perimeters = args[:service_perimeters] if args.key?(:service_perimeters) end end # `ServicePerimeter` describes a set of Google Cloud resources which can freely # import and export data amongst themselves, but not export outside of the ` # ServicePerimeter`. If a request with a source within this `ServicePerimeter` # has a target outside of the `ServicePerimeter`, the request will be blocked. # Otherwise the request is allowed. There are two types of Service Perimeter - # Regular and Bridge. Regular Service Perimeters cannot overlap, a single Google # Cloud project can only belong to a single regular Service Perimeter. Service # Perimeter Bridges can contain only Google Cloud projects as members, a single # Google Cloud project may belong to multiple Service Perimeter Bridges. class ServicePerimeter include Google::Apis::Core::Hashable # Description of the `ServicePerimeter` and its use. Does not affect behavior. # Corresponds to the JSON property `description` # @return [String] attr_accessor :description # Required. Resource name for the ServicePerimeter. The `short_name` component # must begin with a letter and only include alphanumeric and '_'. Format: ` # accessPolicies/`policy_id`/servicePerimeters/`short_name`` # Corresponds to the JSON property `name` # @return [String] attr_accessor :name # Perimeter type indicator. A single project is allowed to be a member of single # regular perimeter, but multiple service perimeter bridges. A project cannot be # a included in a perimeter bridge without being included in regular perimeter. # For perimeter bridges, the restricted service list as well as access level # lists must be empty. # Corresponds to the JSON property `perimeterType` # @return [String] attr_accessor :perimeter_type # `ServicePerimeterConfig` specifies a set of Google Cloud resources that # describe specific Service Perimeter configuration. # Corresponds to the JSON property `spec` # @return [Google::Apis::AccesscontextmanagerV1::ServicePerimeterConfig] attr_accessor :spec # `ServicePerimeterConfig` specifies a set of Google Cloud resources that # describe specific Service Perimeter configuration. # Corresponds to the JSON property `status` # @return [Google::Apis::AccesscontextmanagerV1::ServicePerimeterConfig] attr_accessor :status # Human readable title. Must be unique within the Policy. # Corresponds to the JSON property `title` # @return [String] attr_accessor :title # Use explicit dry run spec flag. Ordinarily, a dry-run spec implicitly exists # for all Service Perimeters, and that spec is identical to the status for those # Service Perimeters. When this flag is set, it inhibits the generation of the # implicit spec, thereby allowing the user to explicitly provide a configuration # ("spec") to use in a dry-run version of the Service Perimeter. This allows the # user to test changes to the enforced config ("status") without actually # enforcing them. This testing is done through analyzing the differences between # currently enforced and suggested restrictions. use_explicit_dry_run_spec must # bet set to True if any of the fields in the spec are set to non-default values. # Corresponds to the JSON property `useExplicitDryRunSpec` # @return [Boolean] attr_accessor :use_explicit_dry_run_spec alias_method :use_explicit_dry_run_spec?, :use_explicit_dry_run_spec def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @description = args[:description] if args.key?(:description) @name = args[:name] if args.key?(:name) @perimeter_type = args[:perimeter_type] if args.key?(:perimeter_type) @spec = args[:spec] if args.key?(:spec) @status = args[:status] if args.key?(:status) @title = args[:title] if args.key?(:title) @use_explicit_dry_run_spec = args[:use_explicit_dry_run_spec] if args.key?(:use_explicit_dry_run_spec) end end # `ServicePerimeterConfig` specifies a set of Google Cloud resources that # describe specific Service Perimeter configuration. class ServicePerimeterConfig include Google::Apis::Core::Hashable # A list of `AccessLevel` resource names that allow resources within the ` # ServicePerimeter` to be accessed from the internet. `AccessLevels` listed must # be in the same policy as this `ServicePerimeter`. Referencing a nonexistent ` # AccessLevel` is a syntax error. If no `AccessLevel` names are listed, # resources within the perimeter can only be accessed via Google Cloud calls # with request origins within the perimeter. Example: `"accessPolicies/MY_POLICY/ # accessLevels/MY_LEVEL"`. For Service Perimeter Bridge, must be empty. # Corresponds to the JSON property `accessLevels` # @return [Array] attr_accessor :access_levels # List of EgressPolicies to apply to the perimeter. A perimeter may have # multiple EgressPolicies, each of which is evaluated separately. Access is # granted if any EgressPolicy grants it. Must be empty for a perimeter bridge. # Corresponds to the JSON property `egressPolicies` # @return [Array] attr_accessor :egress_policies # List of IngressPolicies to apply to the perimeter. A perimeter may have # multiple IngressPolicies, each of which is evaluated separately. Access is # granted if any Ingress Policy grants it. Must be empty for a perimeter bridge. # Corresponds to the JSON property `ingressPolicies` # @return [Array] attr_accessor :ingress_policies # A list of Google Cloud resources that are inside of the service perimeter. # Currently only projects are allowed. Format: `projects/`project_number`` # Corresponds to the JSON property `resources` # @return [Array] attr_accessor :resources # Google Cloud services that are subject to the Service Perimeter restrictions. # For example, if `storage.googleapis.com` is specified, access to the storage # buckets inside the perimeter must meet the perimeter's access restrictions. # Corresponds to the JSON property `restrictedServices` # @return [Array] attr_accessor :restricted_services # Specifies how APIs are allowed to communicate within the Service Perimeter. # Corresponds to the JSON property `vpcAccessibleServices` # @return [Google::Apis::AccesscontextmanagerV1::VpcAccessibleServices] attr_accessor :vpc_accessible_services def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @access_levels = args[:access_levels] if args.key?(:access_levels) @egress_policies = args[:egress_policies] if args.key?(:egress_policies) @ingress_policies = args[:ingress_policies] if args.key?(:ingress_policies) @resources = args[:resources] if args.key?(:resources) @restricted_services = args[:restricted_services] if args.key?(:restricted_services) @vpc_accessible_services = args[:vpc_accessible_services] if args.key?(:vpc_accessible_services) end end # The `Status` type defines a logical error model that is suitable for different # programming environments, including REST APIs and RPC APIs. It is used by [ # gRPC](https://github.com/grpc). Each `Status` message contains three pieces of # data: error code, error message, and error details. You can find out more # about this error model and how to work with it in the [API Design Guide](https: # //cloud.google.com/apis/design/errors). class Status include Google::Apis::Core::Hashable # The status code, which should be an enum value of google.rpc.Code. # Corresponds to the JSON property `code` # @return [Fixnum] attr_accessor :code # A list of messages that carry the error details. There is a common set of # message types for APIs to use. # Corresponds to the JSON property `details` # @return [Array>] attr_accessor :details # A developer-facing error message, which should be in English. Any user-facing # error message should be localized and sent in the google.rpc.Status.details # field, or localized by the client. # Corresponds to the JSON property `message` # @return [String] attr_accessor :message def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @code = args[:code] if args.key?(:code) @details = args[:details] if args.key?(:details) @message = args[:message] if args.key?(:message) end end # Specifies how APIs are allowed to communicate within the Service Perimeter. class VpcAccessibleServices include Google::Apis::Core::Hashable # The list of APIs usable within the Service Perimeter. Must be empty unless ' # enable_restriction' is True. You can specify a list of individual services, as # well as include the 'RESTRICTED-SERVICES' value, which automatically includes # all of the services protected by the perimeter. # Corresponds to the JSON property `allowedServices` # @return [Array] attr_accessor :allowed_services # Whether to restrict API calls within the Service Perimeter to the list of APIs # specified in 'allowed_services'. # Corresponds to the JSON property `enableRestriction` # @return [Boolean] attr_accessor :enable_restriction alias_method :enable_restriction?, :enable_restriction def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @allowed_services = args[:allowed_services] if args.key?(:allowed_services) @enable_restriction = args[:enable_restriction] if args.key?(:enable_restriction) end end end end end