# Copyright 2015 Google Inc. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. require 'date' require 'google/apis/core/base_service' require 'google/apis/core/json_representation' require 'google/apis/core/hashable' require 'google/apis/errors' module Google module Apis module ServiceusageV1 # Api is a light-weight descriptor for an API Interface. # Interfaces are also described as "protocol buffer services" in some contexts, # such as by the "service" keyword in a .proto file, but they are different # from API Services, which represent a concrete implementation of an interface # as opposed to simply a description of methods and bindings. They are also # sometimes simply referred to as "APIs" in other contexts, such as the name of # this message itself. See https://cloud.google.com/apis/design/glossary for # detailed terminology. class Api include Google::Apis::Core::Hashable # The methods of this interface, in unspecified order. # Corresponds to the JSON property `methods` # @return [Array] attr_accessor :methods_prop # Included interfaces. See Mixin. # Corresponds to the JSON property `mixins` # @return [Array] attr_accessor :mixins # The fully qualified name of this interface, including package name # followed by the interface's simple name. # Corresponds to the JSON property `name` # @return [String] attr_accessor :name # Any metadata attached to the interface. # Corresponds to the JSON property `options` # @return [Array] attr_accessor :options # `SourceContext` represents information about the source of a # protobuf element, like the file in which it is defined. # Corresponds to the JSON property `sourceContext` # @return [Google::Apis::ServiceusageV1::SourceContext] attr_accessor :source_context # The source syntax of the service. # Corresponds to the JSON property `syntax` # @return [String] attr_accessor :syntax # A version string for this interface. If specified, must have the form # `major-version.minor-version`, as in `1.10`. If the minor version is # omitted, it defaults to zero. If the entire version field is empty, the # major version is derived from the package name, as outlined below. If the # field is not empty, the version in the package name will be verified to be # consistent with what is provided here. # The versioning schema uses [semantic # versioning](http://semver.org) where the major version number # indicates a breaking change and the minor version an additive, # non-breaking change. Both version numbers are signals to users # what to expect from different versions, and should be carefully # chosen based on the product plan. # The major version is also reflected in the package name of the # interface, which must end in `v`, as in # `google.feature.v1`. For major versions 0 and 1, the suffix can # be omitted. Zero major versions must only be used for # experimental, non-GA interfaces. # Corresponds to the JSON property `version` # @return [String] attr_accessor :version def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @methods_prop = args[:methods_prop] if args.key?(:methods_prop) @mixins = args[:mixins] if args.key?(:mixins) @name = args[:name] if args.key?(:name) @options = args[:options] if args.key?(:options) @source_context = args[:source_context] if args.key?(:source_context) @syntax = args[:syntax] if args.key?(:syntax) @version = args[:version] if args.key?(:version) end end # Configuration for an anthentication provider, including support for # [JSON Web Token (JWT)](https://tools.ietf.org/html/draft-ietf-oauth-json-web- # token-32). class AuthProvider include Google::Apis::Core::Hashable # The list of JWT # [audiences](https://tools.ietf.org/html/draft-ietf-oauth-json-web-token-32# # section-4.1.3). # that are allowed to access. A JWT containing any of these audiences will # be accepted. When this setting is absent, only JWTs with audience # "https://Service_name/API_name" # will be accepted. For example, if no audiences are in the setting, # LibraryService API will only accept JWTs with the following audience # "https://library-example.googleapis.com/google.example.library.v1. # LibraryService". # Example: # audiences: bookstore_android.apps.googleusercontent.com, # bookstore_web.apps.googleusercontent.com # Corresponds to the JSON property `audiences` # @return [String] attr_accessor :audiences # Redirect URL if JWT token is required but no present or is expired. # Implement authorizationUrl of securityDefinitions in OpenAPI spec. # Corresponds to the JSON property `authorizationUrl` # @return [String] attr_accessor :authorization_url # The unique identifier of the auth provider. It will be referred to by # `AuthRequirement.provider_id`. # Example: "bookstore_auth". # Corresponds to the JSON property `id` # @return [String] attr_accessor :id # Identifies the principal that issued the JWT. See # https://tools.ietf.org/html/draft-ietf-oauth-json-web-token-32#section-4.1.1 # Usually a URL or an email address. # Example: https://securetoken.google.com # Example: 1234567-compute@developer.gserviceaccount.com # Corresponds to the JSON property `issuer` # @return [String] attr_accessor :issuer # URL of the provider's public key set to validate signature of the JWT. See # [OpenID Discovery](https://openid.net/specs/openid-connect-discovery-1_0.html# # ProviderMetadata). # Optional if the key set document: # - can be retrieved from # [OpenID Discovery](https://openid.net/specs/openid-connect-discovery-1_0. # html # of the issuer. # - can be inferred from the email domain of the issuer (e.g. a Google service # account). # Example: https://www.googleapis.com/oauth2/v1/certs # Corresponds to the JSON property `jwksUri` # @return [String] attr_accessor :jwks_uri def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @audiences = args[:audiences] if args.key?(:audiences) @authorization_url = args[:authorization_url] if args.key?(:authorization_url) @id = args[:id] if args.key?(:id) @issuer = args[:issuer] if args.key?(:issuer) @jwks_uri = args[:jwks_uri] if args.key?(:jwks_uri) end end # User-defined authentication requirements, including support for # [JSON Web Token (JWT)](https://tools.ietf.org/html/draft-ietf-oauth-json-web- # token-32). class AuthRequirement include Google::Apis::Core::Hashable # NOTE: This will be deprecated soon, once AuthProvider.audiences is # implemented and accepted in all the runtime components. # The list of JWT # [audiences](https://tools.ietf.org/html/draft-ietf-oauth-json-web-token-32# # section-4.1.3). # that are allowed to access. A JWT containing any of these audiences will # be accepted. When this setting is absent, only JWTs with audience # "https://Service_name/API_name" # will be accepted. For example, if no audiences are in the setting, # LibraryService API will only accept JWTs with the following audience # "https://library-example.googleapis.com/google.example.library.v1. # LibraryService". # Example: # audiences: bookstore_android.apps.googleusercontent.com, # bookstore_web.apps.googleusercontent.com # Corresponds to the JSON property `audiences` # @return [String] attr_accessor :audiences # id from authentication provider. # Example: # provider_id: bookstore_auth # Corresponds to the JSON property `providerId` # @return [String] attr_accessor :provider_id def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @audiences = args[:audiences] if args.key?(:audiences) @provider_id = args[:provider_id] if args.key?(:provider_id) end end # `Authentication` defines the authentication configuration for an API. # Example for an API targeted for external use: # name: calendar.googleapis.com # authentication: # providers: # - id: google_calendar_auth # jwks_uri: https://www.googleapis.com/oauth2/v1/certs # issuer: https://securetoken.google.com # rules: # - selector: "*" # requirements: # provider_id: google_calendar_auth class Authentication include Google::Apis::Core::Hashable # Defines a set of authentication providers that a service supports. # Corresponds to the JSON property `providers` # @return [Array] attr_accessor :providers # A list of authentication rules that apply to individual API methods. # **NOTE:** All service configuration rules follow "last one wins" order. # Corresponds to the JSON property `rules` # @return [Array] attr_accessor :rules def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @providers = args[:providers] if args.key?(:providers) @rules = args[:rules] if args.key?(:rules) end end # Authentication rules for the service. # By default, if a method has any authentication requirements, every request # must include a valid credential matching one of the requirements. # It's an error to include more than one kind of credential in a single # request. # If a method doesn't have any auth requirements, request credentials will be # ignored. class AuthenticationRule include Google::Apis::Core::Hashable # If true, the service accepts API keys without any other credential. # Corresponds to the JSON property `allowWithoutCredential` # @return [Boolean] attr_accessor :allow_without_credential alias_method :allow_without_credential?, :allow_without_credential # OAuth scopes are a way to define data and permissions on data. For example, # there are scopes defined for "Read-only access to Google Calendar" and # "Access to Cloud Platform". Users can consent to a scope for an application, # giving it permission to access that data on their behalf. # OAuth scope specifications should be fairly coarse grained; a user will need # to see and understand the text description of what your scope means. # In most cases: use one or at most two OAuth scopes for an entire family of # products. If your product has multiple APIs, you should probably be sharing # the OAuth scope across all of those APIs. # When you need finer grained OAuth consent screens: talk with your product # management about how developers will use them in practice. # Please note that even though each of the canonical scopes is enough for a # request to be accepted and passed to the backend, a request can still fail # due to the backend requiring additional scopes or permissions. # Corresponds to the JSON property `oauth` # @return [Google::Apis::ServiceusageV1::OAuthRequirements] attr_accessor :oauth # Requirements for additional authentication providers. # Corresponds to the JSON property `requirements` # @return [Array] attr_accessor :requirements # Selects the methods to which this rule applies. # Refer to selector for syntax details. # Corresponds to the JSON property `selector` # @return [String] attr_accessor :selector def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @allow_without_credential = args[:allow_without_credential] if args.key?(:allow_without_credential) @oauth = args[:oauth] if args.key?(:oauth) @requirements = args[:requirements] if args.key?(:requirements) @selector = args[:selector] if args.key?(:selector) end end # Configuration of authorization. # This section determines the authorization provider, if unspecified, then no # authorization check will be done. # Example: # experimental: # authorization: # provider: firebaserules.googleapis.com class AuthorizationConfig include Google::Apis::Core::Hashable # The name of the authorization provider, such as # firebaserules.googleapis.com. # Corresponds to the JSON property `provider` # @return [String] attr_accessor :provider def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @provider = args[:provider] if args.key?(:provider) end end # Authorization rule for API services. # It specifies the permission(s) required for an API element for the overall # API request to succeed. It is typically used to mark request message fields # that contain the name of the resource and indicates the permissions that # will be checked on that resource. # For example: # package google.storage.v1; # message CopyObjectRequest ` # string source = 1 [ # (google.api.authz).permissions = "storage.objects.get"]; # string destination = 2 [ # (google.api.authz).permissions = # "storage.objects.create,storage.objects.update"]; # ` class AuthorizationRule include Google::Apis::Core::Hashable # The required permissions. The acceptable values vary depend on the # authorization system used. For Google APIs, it should be a comma-separated # Google IAM permission values. When multiple permissions are listed, the # semantics is not defined by the system. Additional documentation must # be provided manually. # Corresponds to the JSON property `permissions` # @return [String] attr_accessor :permissions # Selects the API elements to which this rule applies. # Refer to selector for syntax details. # Corresponds to the JSON property `selector` # @return [String] attr_accessor :selector def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @permissions = args[:permissions] if args.key?(:permissions) @selector = args[:selector] if args.key?(:selector) end end # `Backend` defines the backend configuration for a service. class Backend include Google::Apis::Core::Hashable # A list of API backend rules that apply to individual API methods. # **NOTE:** All service configuration rules follow "last one wins" order. # Corresponds to the JSON property `rules` # @return [Array] attr_accessor :rules def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @rules = args[:rules] if args.key?(:rules) end end # A backend rule provides configuration for an individual API element. class BackendRule include Google::Apis::Core::Hashable # The address of the API backend. # Corresponds to the JSON property `address` # @return [String] attr_accessor :address # The number of seconds to wait for a response from a request. The default # deadline for gRPC is infinite (no deadline) and HTTP requests is 5 seconds. # Corresponds to the JSON property `deadline` # @return [Float] attr_accessor :deadline # Minimum deadline in seconds needed for this method. Calls having deadline # value lower than this will be rejected. # Corresponds to the JSON property `minDeadline` # @return [Float] attr_accessor :min_deadline # Selects the methods to which this rule applies. # Refer to selector for syntax details. # Corresponds to the JSON property `selector` # @return [String] attr_accessor :selector def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @address = args[:address] if args.key?(:address) @deadline = args[:deadline] if args.key?(:deadline) @min_deadline = args[:min_deadline] if args.key?(:min_deadline) @selector = args[:selector] if args.key?(:selector) end end # Request message for the `BatchEnableServices` method. class BatchEnableServicesRequest include Google::Apis::Core::Hashable # The identifiers of the services to enable on the project. # A valid identifier would be: # serviceusage.googleapis.com # Enabling services requires that each service is public or is shared with # the user enabling the service. # Two or more services must be specified. To enable a single service, # use the `EnableService` method instead. # A single request can enable a maximum of 20 services at a time. If more # than 20 services are specified, the request will fail, and no state changes # will occur. # Corresponds to the JSON property `serviceIds` # @return [Array] attr_accessor :service_ids def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @service_ids = args[:service_ids] if args.key?(:service_ids) end end # Response message for the `BatchEnableServices` method. # This response message is assigned to the `response` field of the returned # Operation when that operation is done. class BatchEnableServicesResponse include Google::Apis::Core::Hashable # If allow_partial_success is true, and one or more services could not be # enabled, this field contains the details about each failure. # Corresponds to the JSON property `failures` # @return [Array] attr_accessor :failures # The new state of the services after enabling. # Corresponds to the JSON property `services` # @return [Array] attr_accessor :services def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @failures = args[:failures] if args.key?(:failures) @services = args[:services] if args.key?(:services) end end # Billing related configuration of the service. # The following example shows how to configure monitored resources and metrics # for billing: # monitored_resources: # - type: library.googleapis.com/branch # labels: # - key: /city # description: The city where the library branch is located in. # - key: /name # description: The name of the branch. # metrics: # - name: library.googleapis.com/book/borrowed_count # metric_kind: DELTA # value_type: INT64 # billing: # consumer_destinations: # - monitored_resource: library.googleapis.com/branch # metrics: # - library.googleapis.com/book/borrowed_count class Billing include Google::Apis::Core::Hashable # Billing configurations for sending metrics to the consumer project. # There can be multiple consumer destinations per service, each one must have # a different monitored resource type. A metric can be used in at most # one consumer destination. # Corresponds to the JSON property `consumerDestinations` # @return [Array] attr_accessor :consumer_destinations def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @consumer_destinations = args[:consumer_destinations] if args.key?(:consumer_destinations) end end # Configuration of a specific billing destination (Currently only support # bill against consumer project). class BillingDestination include Google::Apis::Core::Hashable # Names of the metrics to report to this billing destination. # Each name must be defined in Service.metrics section. # Corresponds to the JSON property `metrics` # @return [Array] attr_accessor :metrics # The monitored resource type. The type must be defined in # Service.monitored_resources section. # Corresponds to the JSON property `monitoredResource` # @return [String] attr_accessor :monitored_resource def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @metrics = args[:metrics] if args.key?(:metrics) @monitored_resource = args[:monitored_resource] if args.key?(:monitored_resource) end end # The request message for Operations.CancelOperation. class CancelOperationRequest include Google::Apis::Core::Hashable def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) end end # `Context` defines which contexts an API requests. # Example: # context: # rules: # - selector: "*" # requested: # - google.rpc.context.ProjectContext # - google.rpc.context.OriginContext # The above specifies that all methods in the API request # `google.rpc.context.ProjectContext` and # `google.rpc.context.OriginContext`. # Available context types are defined in package # `google.rpc.context`. # This also provides mechanism to whitelist any protobuf message extension that # can be sent in grpc metadata using “x-goog-ext--bin” and # “x-goog-ext--jspb” format. For example, list any service # specific protobuf types that can appear in grpc metadata as follows in your # yaml file: # Example: # context: # rules: # - selector: "google.example.library.v1.LibraryService.CreateBook" # allowed_request_extensions: # - google.foo.v1.NewExtension # allowed_response_extensions: # - google.foo.v1.NewExtension # You can also specify extension ID instead of fully qualified extension name # here. class Context include Google::Apis::Core::Hashable # A list of RPC context rules that apply to individual API methods. # **NOTE:** All service configuration rules follow "last one wins" order. # Corresponds to the JSON property `rules` # @return [Array] attr_accessor :rules def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @rules = args[:rules] if args.key?(:rules) end end # A context rule provides information about the context for an individual API # element. class ContextRule include Google::Apis::Core::Hashable # A list of full type names or extension IDs of extensions allowed in grpc # side channel from client to backend. # Corresponds to the JSON property `allowedRequestExtensions` # @return [Array] attr_accessor :allowed_request_extensions # A list of full type names or extension IDs of extensions allowed in grpc # side channel from backend to client. # Corresponds to the JSON property `allowedResponseExtensions` # @return [Array] attr_accessor :allowed_response_extensions # A list of full type names of provided contexts. # Corresponds to the JSON property `provided` # @return [Array] attr_accessor :provided # A list of full type names of requested contexts. # Corresponds to the JSON property `requested` # @return [Array] attr_accessor :requested # Selects the methods to which this rule applies. # Refer to selector for syntax details. # Corresponds to the JSON property `selector` # @return [String] attr_accessor :selector def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @allowed_request_extensions = args[:allowed_request_extensions] if args.key?(:allowed_request_extensions) @allowed_response_extensions = args[:allowed_response_extensions] if args.key?(:allowed_response_extensions) @provided = args[:provided] if args.key?(:provided) @requested = args[:requested] if args.key?(:requested) @selector = args[:selector] if args.key?(:selector) end end # Selects and configures the service controller used by the service. The # service controller handles features like abuse, quota, billing, logging, # monitoring, etc. class Control include Google::Apis::Core::Hashable # The service control environment to use. If empty, no control plane # feature (like quota and billing) will be enabled. # Corresponds to the JSON property `environment` # @return [String] attr_accessor :environment def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @environment = args[:environment] if args.key?(:environment) end end # Customize service error responses. For example, list any service # specific protobuf types that can appear in error detail lists of # error responses. # Example: # custom_error: # types: # - google.foo.v1.CustomError # - google.foo.v1.AnotherError class CustomError include Google::Apis::Core::Hashable # The list of custom error rules that apply to individual API messages. # **NOTE:** All service configuration rules follow "last one wins" order. # Corresponds to the JSON property `rules` # @return [Array] attr_accessor :rules # The list of custom error detail types, e.g. 'google.foo.v1.CustomError'. # Corresponds to the JSON property `types` # @return [Array] attr_accessor :types def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @rules = args[:rules] if args.key?(:rules) @types = args[:types] if args.key?(:types) end end # A custom error rule. class CustomErrorRule include Google::Apis::Core::Hashable # Mark this message as possible payload in error response. Otherwise, # objects of this type will be filtered when they appear in error payload. # Corresponds to the JSON property `isErrorType` # @return [Boolean] attr_accessor :is_error_type alias_method :is_error_type?, :is_error_type # Selects messages to which this rule applies. # Refer to selector for syntax details. # Corresponds to the JSON property `selector` # @return [String] attr_accessor :selector def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @is_error_type = args[:is_error_type] if args.key?(:is_error_type) @selector = args[:selector] if args.key?(:selector) end end # A custom pattern is used for defining custom HTTP verb. class CustomHttpPattern include Google::Apis::Core::Hashable # The name of this custom HTTP verb. # Corresponds to the JSON property `kind` # @return [String] attr_accessor :kind # The path matched by this custom verb. # Corresponds to the JSON property `path` # @return [String] attr_accessor :path def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @kind = args[:kind] if args.key?(:kind) @path = args[:path] if args.key?(:path) end end # Request message for the `DisableService` method. class DisableServiceRequest include Google::Apis::Core::Hashable # Indicates if services that are enabled and which depend on this service # should also be disabled. If not set, an error will be generated if any # enabled services depend on the service to be disabled. When set, the # service, and any enabled services that depend on it, will be disabled # together. # Corresponds to the JSON property `disableDependentServices` # @return [Boolean] attr_accessor :disable_dependent_services alias_method :disable_dependent_services?, :disable_dependent_services def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @disable_dependent_services = args[:disable_dependent_services] if args.key?(:disable_dependent_services) end end # Response message for the `DisableService` method. # This response message is assigned to the `response` field of the returned # Operation when that operation is done. class DisableServiceResponse include Google::Apis::Core::Hashable # A service that is available for use by the consumer. # Corresponds to the JSON property `service` # @return [Google::Apis::ServiceusageV1::GoogleApiServiceusageV1Service] attr_accessor :service def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @service = args[:service] if args.key?(:service) end end # `Documentation` provides the information for describing a service. # Example: #
documentation:
      # summary: >
      # The Google Calendar API gives access
      # to most calendar features.
      # pages:
      # - name: Overview
      # content: (== include google/foo/overview.md ==)
      # - name: Tutorial
      # content: (== include google/foo/tutorial.md ==)
      # subpages;
      # - name: Java
      # content: (== include google/foo/tutorial_java.md ==)
      # rules:
      # - selector: google.calendar.Calendar.Get
      # description: >
      # ...
      # - selector: google.calendar.Calendar.Put
      # description: >
      # ...
      # 
# Documentation is provided in markdown syntax. In addition to # standard markdown features, definition lists, tables and fenced # code blocks are supported. Section headers can be provided and are # interpreted relative to the section nesting of the context where # a documentation fragment is embedded. # Documentation from the IDL is merged with documentation defined # via the config at normalization time, where documentation provided # by config rules overrides IDL provided. # A number of constructs specific to the API platform are supported # in documentation text. # In order to reference a proto element, the following # notation can be used: #
[fully.qualified.proto.name][]
# To override the display text used for the link, this can be used: #
[display text][fully.qualified.proto.name]
# Text can be excluded from doc using the following notation: #
(-- internal comment --)
# A few directives are available in documentation. Note that # directives must appear on a single line to be properly # identified. The `include` directive includes a markdown file from # an external source: #
(== include path/to/file ==)
# The `resource_for` directive marks a message to be the resource of # a collection in REST view. If it is not specified, tools attempt # to infer the resource from the operations in a collection: #
(== resource_for v1.shelves.books ==)
# The directive `suppress_warning` does not directly affect documentation # and is documented together with service config validation. class Documentation include Google::Apis::Core::Hashable # The URL to the root of documentation. # Corresponds to the JSON property `documentationRootUrl` # @return [String] attr_accessor :documentation_root_url # Declares a single overview page. For example: #
documentation:
        # summary: ...
        # overview: (== include overview.md ==)
        # 
# This is a shortcut for the following declaration (using pages style): #
documentation:
        # summary: ...
        # pages:
        # - name: Overview
        # content: (== include overview.md ==)
        # 
# Note: you cannot specify both `overview` field and `pages` field. # Corresponds to the JSON property `overview` # @return [String] attr_accessor :overview # The top level pages for the documentation set. # Corresponds to the JSON property `pages` # @return [Array] attr_accessor :pages # A list of documentation rules that apply to individual API elements. # **NOTE:** All service configuration rules follow "last one wins" order. # Corresponds to the JSON property `rules` # @return [Array] attr_accessor :rules # A short summary of what the service does. Can only be provided by # plain text. # Corresponds to the JSON property `summary` # @return [String] attr_accessor :summary def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @documentation_root_url = args[:documentation_root_url] if args.key?(:documentation_root_url) @overview = args[:overview] if args.key?(:overview) @pages = args[:pages] if args.key?(:pages) @rules = args[:rules] if args.key?(:rules) @summary = args[:summary] if args.key?(:summary) end end # A documentation rule provides information about individual API elements. class DocumentationRule include Google::Apis::Core::Hashable # Deprecation description of the selected element(s). It can be provided if an # element is marked as `deprecated`. # Corresponds to the JSON property `deprecationDescription` # @return [String] attr_accessor :deprecation_description # Description of the selected API(s). # Corresponds to the JSON property `description` # @return [String] attr_accessor :description # The selector is a comma-separated list of patterns. Each pattern is a # qualified name of the element which may end in "*", indicating a wildcard. # Wildcards are only allowed at the end and for a whole component of the # qualified name, i.e. "foo.*" is ok, but not "foo.b*" or "foo.*.bar". To # specify a default for all applicable elements, the whole pattern "*" # is used. # Corresponds to the JSON property `selector` # @return [String] attr_accessor :selector def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @deprecation_description = args[:deprecation_description] if args.key?(:deprecation_description) @description = args[:description] if args.key?(:description) @selector = args[:selector] if args.key?(:selector) end end # A generic empty message that you can re-use to avoid defining duplicated # empty messages in your APIs. A typical example is to use it as the request # or the response type of an API method. For instance: # service Foo ` # rpc Bar(google.protobuf.Empty) returns (google.protobuf.Empty); # ` # The JSON representation for `Empty` is empty JSON object ````. class Empty include Google::Apis::Core::Hashable def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) end end # Provides error messages for the failing services. class EnableFailure include Google::Apis::Core::Hashable # An error message describing why the service could not be enabled. # Corresponds to the JSON property `errorMessage` # @return [String] attr_accessor :error_message # The service id of a service that could not be enabled. # Corresponds to the JSON property `serviceId` # @return [String] attr_accessor :service_id def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @error_message = args[:error_message] if args.key?(:error_message) @service_id = args[:service_id] if args.key?(:service_id) end end # Request message for the `EnableService` method. class EnableServiceRequest include Google::Apis::Core::Hashable def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) end end # Response message for the `EnableService` method. # This response message is assigned to the `response` field of the returned # Operation when that operation is done. class EnableServiceResponse include Google::Apis::Core::Hashable # A service that is available for use by the consumer. # Corresponds to the JSON property `service` # @return [Google::Apis::ServiceusageV1::GoogleApiServiceusageV1Service] attr_accessor :service def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @service = args[:service] if args.key?(:service) end end # `Endpoint` describes a network endpoint that serves a set of APIs. # A service may expose any number of endpoints, and all endpoints share the # same service configuration, such as quota configuration and monitoring # configuration. # Example service configuration: # name: library-example.googleapis.com # endpoints: # # Below entry makes 'google.example.library.v1.Library' # # API be served from endpoint address library-example.googleapis.com. # # It also allows HTTP OPTIONS calls to be passed to the backend, for # # it to decide whether the subsequent cross-origin request is # # allowed to proceed. # - name: library-example.googleapis.com # allow_cors: true class Endpoint include Google::Apis::Core::Hashable # DEPRECATED: This field is no longer supported. Instead of using aliases, # please specify multiple google.api.Endpoint for each of the intended # aliases. # Additional names that this endpoint will be hosted on. # Corresponds to the JSON property `aliases` # @return [Array] attr_accessor :aliases # Allowing # [CORS](https://en.wikipedia.org/wiki/Cross-origin_resource_sharing), aka # cross-domain traffic, would allow the backends served from this endpoint to # receive and respond to HTTP OPTIONS requests. The response will be used by # the browser to determine whether the subsequent cross-origin request is # allowed to proceed. # Corresponds to the JSON property `allowCors` # @return [Boolean] attr_accessor :allow_cors alias_method :allow_cors?, :allow_cors # The list of features enabled on this endpoint. # Corresponds to the JSON property `features` # @return [Array] attr_accessor :features # The canonical name of this endpoint. # Corresponds to the JSON property `name` # @return [String] attr_accessor :name # The specification of an Internet routable address of API frontend that will # handle requests to this [API Endpoint](https://cloud.google.com/apis/design/ # glossary). # It should be either a valid IPv4 address or a fully-qualified domain name. # For example, "8.8.8.8" or "myservice.appspot.com". # Corresponds to the JSON property `target` # @return [String] attr_accessor :target def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @aliases = args[:aliases] if args.key?(:aliases) @allow_cors = args[:allow_cors] if args.key?(:allow_cors) @features = args[:features] if args.key?(:features) @name = args[:name] if args.key?(:name) @target = args[:target] if args.key?(:target) end end # Enum type definition. class Enum include Google::Apis::Core::Hashable # Enum value definitions. # Corresponds to the JSON property `enumvalue` # @return [Array] attr_accessor :enumvalue # Enum type name. # Corresponds to the JSON property `name` # @return [String] attr_accessor :name # Protocol buffer options. # Corresponds to the JSON property `options` # @return [Array] attr_accessor :options # `SourceContext` represents information about the source of a # protobuf element, like the file in which it is defined. # Corresponds to the JSON property `sourceContext` # @return [Google::Apis::ServiceusageV1::SourceContext] attr_accessor :source_context # The source syntax. # Corresponds to the JSON property `syntax` # @return [String] attr_accessor :syntax def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @enumvalue = args[:enumvalue] if args.key?(:enumvalue) @name = args[:name] if args.key?(:name) @options = args[:options] if args.key?(:options) @source_context = args[:source_context] if args.key?(:source_context) @syntax = args[:syntax] if args.key?(:syntax) end end # Enum value definition. class EnumValue include Google::Apis::Core::Hashable # Enum value name. # Corresponds to the JSON property `name` # @return [String] attr_accessor :name # Enum value number. # Corresponds to the JSON property `number` # @return [Fixnum] attr_accessor :number # Protocol buffer options. # Corresponds to the JSON property `options` # @return [Array] attr_accessor :options def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @name = args[:name] if args.key?(:name) @number = args[:number] if args.key?(:number) @options = args[:options] if args.key?(:options) end end # Experimental service configuration. These configuration options can # only be used by whitelisted users. class Experimental include Google::Apis::Core::Hashable # Configuration of authorization. # This section determines the authorization provider, if unspecified, then no # authorization check will be done. # Example: # experimental: # authorization: # provider: firebaserules.googleapis.com # Corresponds to the JSON property `authorization` # @return [Google::Apis::ServiceusageV1::AuthorizationConfig] attr_accessor :authorization def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @authorization = args[:authorization] if args.key?(:authorization) end end # A single field of a message type. class Field include Google::Apis::Core::Hashable # The field cardinality. # Corresponds to the JSON property `cardinality` # @return [String] attr_accessor :cardinality # The string value of the default value of this field. Proto2 syntax only. # Corresponds to the JSON property `defaultValue` # @return [String] attr_accessor :default_value # The field JSON name. # Corresponds to the JSON property `jsonName` # @return [String] attr_accessor :json_name # The field type. # Corresponds to the JSON property `kind` # @return [String] attr_accessor :kind # The field name. # Corresponds to the JSON property `name` # @return [String] attr_accessor :name # The field number. # Corresponds to the JSON property `number` # @return [Fixnum] attr_accessor :number # The index of the field type in `Type.oneofs`, for message or enumeration # types. The first type has index 1; zero means the type is not in the list. # Corresponds to the JSON property `oneofIndex` # @return [Fixnum] attr_accessor :oneof_index # The protocol buffer options. # Corresponds to the JSON property `options` # @return [Array] attr_accessor :options # Whether to use alternative packed wire representation. # Corresponds to the JSON property `packed` # @return [Boolean] attr_accessor :packed alias_method :packed?, :packed # The field type URL, without the scheme, for message or enumeration # types. Example: `"type.googleapis.com/google.protobuf.Timestamp"`. # Corresponds to the JSON property `typeUrl` # @return [String] attr_accessor :type_url def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @cardinality = args[:cardinality] if args.key?(:cardinality) @default_value = args[:default_value] if args.key?(:default_value) @json_name = args[:json_name] if args.key?(:json_name) @kind = args[:kind] if args.key?(:kind) @name = args[:name] if args.key?(:name) @number = args[:number] if args.key?(:number) @oneof_index = args[:oneof_index] if args.key?(:oneof_index) @options = args[:options] if args.key?(:options) @packed = args[:packed] if args.key?(:packed) @type_url = args[:type_url] if args.key?(:type_url) end end # `Service` is the root object of Google service configuration schema. It # describes basic information about a service, such as the name and the # title, and delegates other aspects to sub-sections. Each sub-section is # either a proto message or a repeated proto message that configures a # specific aspect, such as auth. See each proto message definition for details. # Example: # type: google.api.Service # config_version: 3 # name: calendar.googleapis.com # title: Google Calendar API # apis: # - name: google.calendar.v3.Calendar # authentication: # providers: # - id: google_calendar_auth # jwks_uri: https://www.googleapis.com/oauth2/v1/certs # issuer: https://securetoken.google.com # rules: # - selector: "*" # requirements: # provider_id: google_calendar_auth class GoogleApiService include Google::Apis::Core::Hashable # A list of API interfaces exported by this service. Only the `name` field # of the google.protobuf.Api needs to be provided by the configuration # author, as the remaining fields will be derived from the IDL during the # normalization process. It is an error to specify an API interface here # which cannot be resolved against the associated IDL files. # Corresponds to the JSON property `apis` # @return [Array] attr_accessor :apis # `Authentication` defines the authentication configuration for an API. # Example for an API targeted for external use: # name: calendar.googleapis.com # authentication: # providers: # - id: google_calendar_auth # jwks_uri: https://www.googleapis.com/oauth2/v1/certs # issuer: https://securetoken.google.com # rules: # - selector: "*" # requirements: # provider_id: google_calendar_auth # Corresponds to the JSON property `authentication` # @return [Google::Apis::ServiceusageV1::Authentication] attr_accessor :authentication # `Backend` defines the backend configuration for a service. # Corresponds to the JSON property `backend` # @return [Google::Apis::ServiceusageV1::Backend] attr_accessor :backend # Billing related configuration of the service. # The following example shows how to configure monitored resources and metrics # for billing: # monitored_resources: # - type: library.googleapis.com/branch # labels: # - key: /city # description: The city where the library branch is located in. # - key: /name # description: The name of the branch. # metrics: # - name: library.googleapis.com/book/borrowed_count # metric_kind: DELTA # value_type: INT64 # billing: # consumer_destinations: # - monitored_resource: library.googleapis.com/branch # metrics: # - library.googleapis.com/book/borrowed_count # Corresponds to the JSON property `billing` # @return [Google::Apis::ServiceusageV1::Billing] attr_accessor :billing # The semantic version of the service configuration. The config version # affects the interpretation of the service configuration. For example, # certain features are enabled by default for certain config versions. # The latest config version is `3`. # Corresponds to the JSON property `configVersion` # @return [Fixnum] attr_accessor :config_version # `Context` defines which contexts an API requests. # Example: # context: # rules: # - selector: "*" # requested: # - google.rpc.context.ProjectContext # - google.rpc.context.OriginContext # The above specifies that all methods in the API request # `google.rpc.context.ProjectContext` and # `google.rpc.context.OriginContext`. # Available context types are defined in package # `google.rpc.context`. # This also provides mechanism to whitelist any protobuf message extension that # can be sent in grpc metadata using “x-goog-ext--bin” and # “x-goog-ext--jspb” format. For example, list any service # specific protobuf types that can appear in grpc metadata as follows in your # yaml file: # Example: # context: # rules: # - selector: "google.example.library.v1.LibraryService.CreateBook" # allowed_request_extensions: # - google.foo.v1.NewExtension # allowed_response_extensions: # - google.foo.v1.NewExtension # You can also specify extension ID instead of fully qualified extension name # here. # Corresponds to the JSON property `context` # @return [Google::Apis::ServiceusageV1::Context] attr_accessor :context # Selects and configures the service controller used by the service. The # service controller handles features like abuse, quota, billing, logging, # monitoring, etc. # Corresponds to the JSON property `control` # @return [Google::Apis::ServiceusageV1::Control] attr_accessor :control # Customize service error responses. For example, list any service # specific protobuf types that can appear in error detail lists of # error responses. # Example: # custom_error: # types: # - google.foo.v1.CustomError # - google.foo.v1.AnotherError # Corresponds to the JSON property `customError` # @return [Google::Apis::ServiceusageV1::CustomError] attr_accessor :custom_error # `Documentation` provides the information for describing a service. # Example: #
documentation:
        # summary: >
        # The Google Calendar API gives access
        # to most calendar features.
        # pages:
        # - name: Overview
        # content: (== include google/foo/overview.md ==)
        # - name: Tutorial
        # content: (== include google/foo/tutorial.md ==)
        # subpages;
        # - name: Java
        # content: (== include google/foo/tutorial_java.md ==)
        # rules:
        # - selector: google.calendar.Calendar.Get
        # description: >
        # ...
        # - selector: google.calendar.Calendar.Put
        # description: >
        # ...
        # 
# Documentation is provided in markdown syntax. In addition to # standard markdown features, definition lists, tables and fenced # code blocks are supported. Section headers can be provided and are # interpreted relative to the section nesting of the context where # a documentation fragment is embedded. # Documentation from the IDL is merged with documentation defined # via the config at normalization time, where documentation provided # by config rules overrides IDL provided. # A number of constructs specific to the API platform are supported # in documentation text. # In order to reference a proto element, the following # notation can be used: #
[fully.qualified.proto.name][]
# To override the display text used for the link, this can be used: #
[display text][fully.qualified.proto.name]
# Text can be excluded from doc using the following notation: #
(-- internal comment --)
# A few directives are available in documentation. Note that # directives must appear on a single line to be properly # identified. The `include` directive includes a markdown file from # an external source: #
(== include path/to/file ==)
# The `resource_for` directive marks a message to be the resource of # a collection in REST view. If it is not specified, tools attempt # to infer the resource from the operations in a collection: #
(== resource_for v1.shelves.books ==)
# The directive `suppress_warning` does not directly affect documentation # and is documented together with service config validation. # Corresponds to the JSON property `documentation` # @return [Google::Apis::ServiceusageV1::Documentation] attr_accessor :documentation # Configuration for network endpoints. If this is empty, then an endpoint # with the same name as the service is automatically generated to service all # defined APIs. # Corresponds to the JSON property `endpoints` # @return [Array] attr_accessor :endpoints # A list of all enum types included in this API service. Enums # referenced directly or indirectly by the `apis` are automatically # included. Enums which are not referenced but shall be included # should be listed here by name. Example: # enums: # - name: google.someapi.v1.SomeEnum # Corresponds to the JSON property `enums` # @return [Array] attr_accessor :enums # Experimental service configuration. These configuration options can # only be used by whitelisted users. # Corresponds to the JSON property `experimental` # @return [Google::Apis::ServiceusageV1::Experimental] attr_accessor :experimental # Defines the HTTP configuration for an API service. It contains a list of # HttpRule, each specifying the mapping of an RPC method # to one or more HTTP REST API methods. # Corresponds to the JSON property `http` # @return [Google::Apis::ServiceusageV1::Http] attr_accessor :http # A unique ID for a specific instance of this message, typically assigned # by the client for tracking purpose. If empty, the server may choose to # generate one instead. Must be no longer than 60 characters. # Corresponds to the JSON property `id` # @return [String] attr_accessor :id # Logging configuration of the service. # The following example shows how to configure logs to be sent to the # producer and consumer projects. In the example, the `activity_history` # log is sent to both the producer and consumer projects, whereas the # `purchase_history` log is only sent to the producer project. # monitored_resources: # - type: library.googleapis.com/branch # labels: # - key: /city # description: The city where the library branch is located in. # - key: /name # description: The name of the branch. # logs: # - name: activity_history # labels: # - key: /customer_id # - name: purchase_history # logging: # producer_destinations: # - monitored_resource: library.googleapis.com/branch # logs: # - activity_history # - purchase_history # consumer_destinations: # - monitored_resource: library.googleapis.com/branch # logs: # - activity_history # Corresponds to the JSON property `logging` # @return [Google::Apis::ServiceusageV1::Logging] attr_accessor :logging # Defines the logs used by this service. # Corresponds to the JSON property `logs` # @return [Array] attr_accessor :logs # Defines the metrics used by this service. # Corresponds to the JSON property `metrics` # @return [Array] attr_accessor :metrics # Defines the monitored resources used by this service. This is required # by the Service.monitoring and Service.logging configurations. # Corresponds to the JSON property `monitoredResources` # @return [Array] attr_accessor :monitored_resources # Monitoring configuration of the service. # The example below shows how to configure monitored resources and metrics # for monitoring. In the example, a monitored resource and two metrics are # defined. The `library.googleapis.com/book/returned_count` metric is sent # to both producer and consumer projects, whereas the # `library.googleapis.com/book/overdue_count` metric is only sent to the # consumer project. # monitored_resources: # - type: library.googleapis.com/branch # labels: # - key: /city # description: The city where the library branch is located in. # - key: /name # description: The name of the branch. # metrics: # - name: library.googleapis.com/book/returned_count # metric_kind: DELTA # value_type: INT64 # labels: # - key: /customer_id # - name: library.googleapis.com/book/overdue_count # metric_kind: GAUGE # value_type: INT64 # labels: # - key: /customer_id # monitoring: # producer_destinations: # - monitored_resource: library.googleapis.com/branch # metrics: # - library.googleapis.com/book/returned_count # consumer_destinations: # - monitored_resource: library.googleapis.com/branch # metrics: # - library.googleapis.com/book/returned_count # - library.googleapis.com/book/overdue_count # Corresponds to the JSON property `monitoring` # @return [Google::Apis::ServiceusageV1::Monitoring] attr_accessor :monitoring # The DNS address at which this service is available, # e.g. `calendar.googleapis.com`. # Corresponds to the JSON property `name` # @return [String] attr_accessor :name # The Google project that owns this service. # Corresponds to the JSON property `producerProjectId` # @return [String] attr_accessor :producer_project_id # Quota configuration helps to achieve fairness and budgeting in service # usage. # The quota configuration works this way: # - The service configuration defines a set of metrics. # - For API calls, the quota.metric_rules maps methods to metrics with # corresponding costs. # - The quota.limits defines limits on the metrics, which will be used for # quota checks at runtime. # An example quota configuration in yaml format: # quota: # - name: apiWriteQpsPerProject # metric: library.googleapis.com/write_calls # unit: "1/min/`project`" # rate limit for consumer projects # values: # STANDARD: 10000 # # The metric rules bind all methods to the read_calls metric, # # except for the UpdateBook and DeleteBook methods. These two methods # # are mapped to the write_calls metric, with the UpdateBook method # # consuming at twice rate as the DeleteBook method. # metric_rules: # - selector: "*" # metric_costs: # library.googleapis.com/read_calls: 1 # - selector: google.example.library.v1.LibraryService.UpdateBook # metric_costs: # library.googleapis.com/write_calls: 2 # - selector: google.example.library.v1.LibraryService.DeleteBook # metric_costs: # library.googleapis.com/write_calls: 1 # Corresponding Metric definition: # metrics: # - name: library.googleapis.com/read_calls # display_name: Read requests # metric_kind: DELTA # value_type: INT64 # - name: library.googleapis.com/write_calls # display_name: Write requests # metric_kind: DELTA # value_type: INT64 # Corresponds to the JSON property `quota` # @return [Google::Apis::ServiceusageV1::Quota] attr_accessor :quota # Source information used to create a Service Config # Corresponds to the JSON property `sourceInfo` # @return [Google::Apis::ServiceusageV1::SourceInfo] attr_accessor :source_info # ### System parameter configuration # A system parameter is a special kind of parameter defined by the API # system, not by an individual API. It is typically mapped to an HTTP header # and/or a URL query parameter. This configuration specifies which methods # change the names of the system parameters. # Corresponds to the JSON property `systemParameters` # @return [Google::Apis::ServiceusageV1::SystemParameters] attr_accessor :system_parameters # A list of all proto message types included in this API service. # It serves similar purpose as [google.api.Service.types], except that # these types are not needed by user-defined APIs. Therefore, they will not # show up in the generated discovery doc. This field should only be used # to define system APIs in ESF. # Corresponds to the JSON property `systemTypes` # @return [Array] attr_accessor :system_types # The product title for this service. # Corresponds to the JSON property `title` # @return [String] attr_accessor :title # A list of all proto message types included in this API service. # Types referenced directly or indirectly by the `apis` are # automatically included. Messages which are not referenced but # shall be included, such as types used by the `google.protobuf.Any` type, # should be listed here by name. Example: # types: # - name: google.protobuf.Int32 # Corresponds to the JSON property `types` # @return [Array] attr_accessor :types # Configuration controlling usage of a service. # Corresponds to the JSON property `usage` # @return [Google::Apis::ServiceusageV1::Usage] attr_accessor :usage def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @apis = args[:apis] if args.key?(:apis) @authentication = args[:authentication] if args.key?(:authentication) @backend = args[:backend] if args.key?(:backend) @billing = args[:billing] if args.key?(:billing) @config_version = args[:config_version] if args.key?(:config_version) @context = args[:context] if args.key?(:context) @control = args[:control] if args.key?(:control) @custom_error = args[:custom_error] if args.key?(:custom_error) @documentation = args[:documentation] if args.key?(:documentation) @endpoints = args[:endpoints] if args.key?(:endpoints) @enums = args[:enums] if args.key?(:enums) @experimental = args[:experimental] if args.key?(:experimental) @http = args[:http] if args.key?(:http) @id = args[:id] if args.key?(:id) @logging = args[:logging] if args.key?(:logging) @logs = args[:logs] if args.key?(:logs) @metrics = args[:metrics] if args.key?(:metrics) @monitored_resources = args[:monitored_resources] if args.key?(:monitored_resources) @monitoring = args[:monitoring] if args.key?(:monitoring) @name = args[:name] if args.key?(:name) @producer_project_id = args[:producer_project_id] if args.key?(:producer_project_id) @quota = args[:quota] if args.key?(:quota) @source_info = args[:source_info] if args.key?(:source_info) @system_parameters = args[:system_parameters] if args.key?(:system_parameters) @system_types = args[:system_types] if args.key?(:system_types) @title = args[:title] if args.key?(:title) @types = args[:types] if args.key?(:types) @usage = args[:usage] if args.key?(:usage) end end # The operation metadata returned for the batchend services operation. class GoogleApiServiceusageV1OperationMetadata include Google::Apis::Core::Hashable # The full name of the resources that this operation is directly # associated with. # Corresponds to the JSON property `resourceNames` # @return [Array] attr_accessor :resource_names def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @resource_names = args[:resource_names] if args.key?(:resource_names) end end # A service that is available for use by the consumer. class GoogleApiServiceusageV1Service include Google::Apis::Core::Hashable # The configuration of the service. # Corresponds to the JSON property `config` # @return [Google::Apis::ServiceusageV1::GoogleApiServiceusageV1ServiceConfig] attr_accessor :config # The resource name of the consumer and service. # A valid name would be: # - projects/123/services/serviceusage.googleapis.com # Corresponds to the JSON property `name` # @return [String] attr_accessor :name # The resource name of the consumer. # A valid name would be: # - projects/123 # Corresponds to the JSON property `parent` # @return [String] attr_accessor :parent # Whether or not the service has been enabled for use by the consumer. # Corresponds to the JSON property `state` # @return [String] attr_accessor :state def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @config = args[:config] if args.key?(:config) @name = args[:name] if args.key?(:name) @parent = args[:parent] if args.key?(:parent) @state = args[:state] if args.key?(:state) end end # The configuration of the service. class GoogleApiServiceusageV1ServiceConfig include Google::Apis::Core::Hashable # A list of API interfaces exported by this service. Contains only the names, # versions, and method names of the interfaces. # Corresponds to the JSON property `apis` # @return [Array] attr_accessor :apis # `Authentication` defines the authentication configuration for an API. # Example for an API targeted for external use: # name: calendar.googleapis.com # authentication: # providers: # - id: google_calendar_auth # jwks_uri: https://www.googleapis.com/oauth2/v1/certs # issuer: https://securetoken.google.com # rules: # - selector: "*" # requirements: # provider_id: google_calendar_auth # Corresponds to the JSON property `authentication` # @return [Google::Apis::ServiceusageV1::Authentication] attr_accessor :authentication # `Documentation` provides the information for describing a service. # Example: #
documentation:
        # summary: >
        # The Google Calendar API gives access
        # to most calendar features.
        # pages:
        # - name: Overview
        # content: (== include google/foo/overview.md ==)
        # - name: Tutorial
        # content: (== include google/foo/tutorial.md ==)
        # subpages;
        # - name: Java
        # content: (== include google/foo/tutorial_java.md ==)
        # rules:
        # - selector: google.calendar.Calendar.Get
        # description: >
        # ...
        # - selector: google.calendar.Calendar.Put
        # description: >
        # ...
        # 
# Documentation is provided in markdown syntax. In addition to # standard markdown features, definition lists, tables and fenced # code blocks are supported. Section headers can be provided and are # interpreted relative to the section nesting of the context where # a documentation fragment is embedded. # Documentation from the IDL is merged with documentation defined # via the config at normalization time, where documentation provided # by config rules overrides IDL provided. # A number of constructs specific to the API platform are supported # in documentation text. # In order to reference a proto element, the following # notation can be used: #
[fully.qualified.proto.name][]
# To override the display text used for the link, this can be used: #
[display text][fully.qualified.proto.name]
# Text can be excluded from doc using the following notation: #
(-- internal comment --)
# A few directives are available in documentation. Note that # directives must appear on a single line to be properly # identified. The `include` directive includes a markdown file from # an external source: #
(== include path/to/file ==)
# The `resource_for` directive marks a message to be the resource of # a collection in REST view. If it is not specified, tools attempt # to infer the resource from the operations in a collection: #
(== resource_for v1.shelves.books ==)
# The directive `suppress_warning` does not directly affect documentation # and is documented together with service config validation. # Corresponds to the JSON property `documentation` # @return [Google::Apis::ServiceusageV1::Documentation] attr_accessor :documentation # Configuration for network endpoints. Contains only the names and aliases # of the endpoints. # Corresponds to the JSON property `endpoints` # @return [Array] attr_accessor :endpoints # The DNS address at which this service is available. # An example DNS address would be: # `calendar.googleapis.com`. # Corresponds to the JSON property `name` # @return [String] attr_accessor :name # Quota configuration helps to achieve fairness and budgeting in service # usage. # The quota configuration works this way: # - The service configuration defines a set of metrics. # - For API calls, the quota.metric_rules maps methods to metrics with # corresponding costs. # - The quota.limits defines limits on the metrics, which will be used for # quota checks at runtime. # An example quota configuration in yaml format: # quota: # - name: apiWriteQpsPerProject # metric: library.googleapis.com/write_calls # unit: "1/min/`project`" # rate limit for consumer projects # values: # STANDARD: 10000 # # The metric rules bind all methods to the read_calls metric, # # except for the UpdateBook and DeleteBook methods. These two methods # # are mapped to the write_calls metric, with the UpdateBook method # # consuming at twice rate as the DeleteBook method. # metric_rules: # - selector: "*" # metric_costs: # library.googleapis.com/read_calls: 1 # - selector: google.example.library.v1.LibraryService.UpdateBook # metric_costs: # library.googleapis.com/write_calls: 2 # - selector: google.example.library.v1.LibraryService.DeleteBook # metric_costs: # library.googleapis.com/write_calls: 1 # Corresponding Metric definition: # metrics: # - name: library.googleapis.com/read_calls # display_name: Read requests # metric_kind: DELTA # value_type: INT64 # - name: library.googleapis.com/write_calls # display_name: Write requests # metric_kind: DELTA # value_type: INT64 # Corresponds to the JSON property `quota` # @return [Google::Apis::ServiceusageV1::Quota] attr_accessor :quota # The product title for this service. # Corresponds to the JSON property `title` # @return [String] attr_accessor :title # Configuration controlling usage of a service. # Corresponds to the JSON property `usage` # @return [Google::Apis::ServiceusageV1::Usage] attr_accessor :usage def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @apis = args[:apis] if args.key?(:apis) @authentication = args[:authentication] if args.key?(:authentication) @documentation = args[:documentation] if args.key?(:documentation) @endpoints = args[:endpoints] if args.key?(:endpoints) @name = args[:name] if args.key?(:name) @quota = args[:quota] if args.key?(:quota) @title = args[:title] if args.key?(:title) @usage = args[:usage] if args.key?(:usage) end end # Defines the HTTP configuration for an API service. It contains a list of # HttpRule, each specifying the mapping of an RPC method # to one or more HTTP REST API methods. class Http include Google::Apis::Core::Hashable # When set to true, URL path parmeters will be fully URI-decoded except in # cases of single segment matches in reserved expansion, where "%2F" will be # left encoded. # The default behavior is to not decode RFC 6570 reserved characters in multi # segment matches. # Corresponds to the JSON property `fullyDecodeReservedExpansion` # @return [Boolean] attr_accessor :fully_decode_reserved_expansion alias_method :fully_decode_reserved_expansion?, :fully_decode_reserved_expansion # A list of HTTP configuration rules that apply to individual API methods. # **NOTE:** All service configuration rules follow "last one wins" order. # Corresponds to the JSON property `rules` # @return [Array] attr_accessor :rules def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @fully_decode_reserved_expansion = args[:fully_decode_reserved_expansion] if args.key?(:fully_decode_reserved_expansion) @rules = args[:rules] if args.key?(:rules) end end # `HttpRule` defines the mapping of an RPC method to one or more HTTP # REST API methods. The mapping specifies how different portions of the RPC # request message are mapped to URL path, URL query parameters, and # HTTP request body. The mapping is typically specified as an # `google.api.http` annotation on the RPC method, # see "google/api/annotations.proto" for details. # The mapping consists of a field specifying the path template and # method kind. The path template can refer to fields in the request # message, as in the example below which describes a REST GET # operation on a resource collection of messages: # service Messaging ` # rpc GetMessage(GetMessageRequest) returns (Message) ` # option (google.api.http).get = "/v1/messages/`message_id`/`sub. # subfield`"; # ` # ` # message GetMessageRequest ` # message SubMessage ` # string subfield = 1; # ` # string message_id = 1; // mapped to the URL # SubMessage sub = 2; // `sub.subfield` is url-mapped # ` # message Message ` # string text = 1; // content of the resource # ` # The same http annotation can alternatively be expressed inside the # `GRPC API Configuration` YAML file. # http: # rules: # - selector: .Messaging.GetMessage # get: /v1/messages/`message_id`/`sub.subfield` # This definition enables an automatic, bidrectional mapping of HTTP # JSON to RPC. Example: # HTTP | RPC # -----|----- # `GET /v1/messages/123456/foo` | `GetMessage(message_id: "123456" sub: # SubMessage(subfield: "foo"))` # In general, not only fields but also field paths can be referenced # from a path pattern. Fields mapped to the path pattern cannot be # repeated and must have a primitive (non-message) type. # Any fields in the request message which are not bound by the path # pattern automatically become (optional) HTTP query # parameters. Assume the following definition of the request message: # service Messaging ` # rpc GetMessage(GetMessageRequest) returns (Message) ` # option (google.api.http).get = "/v1/messages/`message_id`"; # ` # ` # message GetMessageRequest ` # message SubMessage ` # string subfield = 1; # ` # string message_id = 1; // mapped to the URL # int64 revision = 2; // becomes a parameter # SubMessage sub = 3; // `sub.subfield` becomes a parameter # ` # This enables a HTTP JSON to RPC mapping as below: # HTTP | RPC # -----|----- # `GET /v1/messages/123456?revision=2&sub.subfield=foo` | `GetMessage(message_id: # "123456" revision: 2 sub: SubMessage(subfield: "foo"))` # Note that fields which are mapped to HTTP parameters must have a # primitive type or a repeated primitive type. Message types are not # allowed. In the case of a repeated type, the parameter can be # repeated in the URL, as in `...?param=A¶m=B`. # For HTTP method kinds which allow a request body, the `body` field # specifies the mapping. Consider a REST update method on the # message resource collection: # service Messaging ` # rpc UpdateMessage(UpdateMessageRequest) returns (Message) ` # option (google.api.http) = ` # put: "/v1/messages/`message_id`" # body: "message" # `; # ` # ` # message UpdateMessageRequest ` # string message_id = 1; // mapped to the URL # Message message = 2; // mapped to the body # ` # The following HTTP JSON to RPC mapping is enabled, where the # representation of the JSON in the request body is determined by # protos JSON encoding: # HTTP | RPC # -----|----- # `PUT /v1/messages/123456 ` "text": "Hi!" `` | `UpdateMessage(message_id: " # 123456" message ` text: "Hi!" `)` # The special name `*` can be used in the body mapping to define that # every field not bound by the path template should be mapped to the # request body. This enables the following alternative definition of # the update method: # service Messaging ` # rpc UpdateMessage(Message) returns (Message) ` # option (google.api.http) = ` # put: "/v1/messages/`message_id`" # body: "*" # `; # ` # ` # message Message ` # string message_id = 1; # string text = 2; # ` # The following HTTP JSON to RPC mapping is enabled: # HTTP | RPC # -----|----- # `PUT /v1/messages/123456 ` "text": "Hi!" `` | `UpdateMessage(message_id: " # 123456" text: "Hi!")` # Note that when using `*` in the body mapping, it is not possible to # have HTTP parameters, as all fields not bound by the path end in # the body. This makes this option more rarely used in practice of # defining REST APIs. The common usage of `*` is in custom methods # which don't use the URL at all for transferring data. # It is possible to define multiple HTTP methods for one RPC by using # the `additional_bindings` option. Example: # service Messaging ` # rpc GetMessage(GetMessageRequest) returns (Message) ` # option (google.api.http) = ` # get: "/v1/messages/`message_id`" # additional_bindings ` # get: "/v1/users/`user_id`/messages/`message_id`" # ` # `; # ` # ` # message GetMessageRequest ` # string message_id = 1; # string user_id = 2; # ` # This enables the following two alternative HTTP JSON to RPC # mappings: # HTTP | RPC # -----|----- # `GET /v1/messages/123456` | `GetMessage(message_id: "123456")` # `GET /v1/users/me/messages/123456` | `GetMessage(user_id: "me" message_id: " # 123456")` # # Rules for HTTP mapping # The rules for mapping HTTP path, query parameters, and body fields # to the request message are as follows: # 1. The `body` field specifies either `*` or a field path, or is # omitted. If omitted, it indicates there is no HTTP request body. # 2. Leaf fields (recursive expansion of nested messages in the # request) can be classified into three types: # (a) Matched in the URL template. # (b) Covered by body (if body is `*`, everything except (a) fields; # else everything under the body field) # (c) All other fields. # 3. URL query parameters found in the HTTP request are mapped to (c) fields. # 4. Any body sent with an HTTP request can contain only (b) fields. # The syntax of the path template is as follows: # Template = "/" Segments [ Verb ] ; # Segments = Segment ` "/" Segment ` ; # Segment = "*" | "**" | LITERAL | Variable ; # Variable = "`" FieldPath [ "=" Segments ] "`" ; # FieldPath = IDENT ` "." IDENT ` ; # Verb = ":" LITERAL ; # The syntax `*` matches a single path segment. The syntax `**` matches zero # or more path segments, which must be the last part of the path except the # `Verb`. The syntax `LITERAL` matches literal text in the path. # The syntax `Variable` matches part of the URL path as specified by its # template. A variable template must not contain other variables. If a variable # matches a single path segment, its template may be omitted, e.g. ``var`` # is equivalent to ``var=*``. # If a variable contains exactly one path segment, such as `"`var`"` or # `"`var=*`"`, when such a variable is expanded into a URL path, all characters # except `[-_.~0-9a-zA-Z]` are percent-encoded. Such variables show up in the # Discovery Document as ``var``. # If a variable contains one or more path segments, such as `"`var=foo/*`"` # or `"`var=**`"`, when such a variable is expanded into a URL path, all # characters except `[-_.~/0-9a-zA-Z]` are percent-encoded. Such variables # show up in the Discovery Document as ``+var``. # NOTE: While the single segment variable matches the semantics of # [RFC 6570](https://tools.ietf.org/html/rfc6570) Section 3.2.2 # Simple String Expansion, the multi segment variable **does not** match # RFC 6570 Reserved Expansion. The reason is that the Reserved Expansion # does not expand special characters like `?` and `#`, which would lead # to invalid URLs. # NOTE: the field paths in variables and in the `body` must not refer to # repeated fields or map fields. class HttpRule include Google::Apis::Core::Hashable # Additional HTTP bindings for the selector. Nested bindings must # not contain an `additional_bindings` field themselves (that is, # the nesting may only be one level deep). # Corresponds to the JSON property `additionalBindings` # @return [Array] attr_accessor :additional_bindings # Specifies the permission(s) required for an API element for the overall # API request to succeed. It is typically used to mark request message fields # that contain the name of the resource and indicates the permissions that # will be checked on that resource. # Corresponds to the JSON property `authorizations` # @return [Array] attr_accessor :authorizations # The name of the request field whose value is mapped to the HTTP body, or # `*` for mapping all fields not captured by the path pattern to the HTTP # body. NOTE: the referred field must not be a repeated field and must be # present at the top-level of request message type. # Corresponds to the JSON property `body` # @return [String] attr_accessor :body # A custom pattern is used for defining custom HTTP verb. # Corresponds to the JSON property `custom` # @return [Google::Apis::ServiceusageV1::CustomHttpPattern] attr_accessor :custom # Used for deleting a resource. # Corresponds to the JSON property `delete` # @return [String] attr_accessor :delete # Used for listing and getting information about resources. # Corresponds to the JSON property `get` # @return [String] attr_accessor :get # Defines the Media configuration for a service in case of a download. # Use this only for Scotty Requests. Do not use this for media support using # Bytestream, add instead [][google.bytestream.RestByteStream] as an API to # your configuration for Bytestream methods. # Corresponds to the JSON property `mediaDownload` # @return [Google::Apis::ServiceusageV1::MediaDownload] attr_accessor :media_download # Defines the Media configuration for a service in case of an upload. # Use this only for Scotty Requests. Do not use this for media support using # Bytestream, add instead [][google.bytestream.RestByteStream] as an API to # your configuration for Bytestream methods. # Corresponds to the JSON property `mediaUpload` # @return [Google::Apis::ServiceusageV1::MediaUpload] attr_accessor :media_upload # Used for updating a resource. # Corresponds to the JSON property `patch` # @return [String] attr_accessor :patch # Used for creating a resource. # Corresponds to the JSON property `post` # @return [String] attr_accessor :post # Used for updating a resource. # Corresponds to the JSON property `put` # @return [String] attr_accessor :put # Optional. The name of the response field whose value is mapped to the HTTP # body of response. Other response fields are ignored. When # not set, the response message will be used as HTTP body of response. # Corresponds to the JSON property `responseBody` # @return [String] attr_accessor :response_body # DO NOT USE. This is an experimental field. # Optional. The REST collection name is by default derived from the URL # pattern. If specified, this field overrides the default collection name. # Example: # rpc AddressesAggregatedList(AddressesAggregatedListRequest) # returns (AddressesAggregatedListResponse) ` # option (google.api.http) = ` # get: "/v1/projects/`project_id`/aggregated/addresses" # rest_collection: "projects.addresses" # `; # ` # This method has the automatically derived collection name # "projects.aggregated". Because, semantically, this rpc is actually an # operation on the "projects.addresses" collection, the `rest_collection` # field is configured to override the derived collection name. # Corresponds to the JSON property `restCollection` # @return [String] attr_accessor :rest_collection # DO NOT USE. This is an experimental field. # Optional. The rest method name is by default derived from the URL # pattern. If specified, this field overrides the default method name. # Example: # rpc CreateResource(CreateResourceRequest) # returns (CreateResourceResponse) ` # option (google.api.http) = ` # post: "/v1/resources", # body: "resource", # rest_method_name: "insert" # `; # ` # This method has the automatically derived rest method name # "create", but for backwards compatibility with apiary, it is specified as # insert. # Corresponds to the JSON property `restMethodName` # @return [String] attr_accessor :rest_method_name # Selects methods to which this rule applies. # Refer to selector for syntax details. # Corresponds to the JSON property `selector` # @return [String] attr_accessor :selector def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @additional_bindings = args[:additional_bindings] if args.key?(:additional_bindings) @authorizations = args[:authorizations] if args.key?(:authorizations) @body = args[:body] if args.key?(:body) @custom = args[:custom] if args.key?(:custom) @delete = args[:delete] if args.key?(:delete) @get = args[:get] if args.key?(:get) @media_download = args[:media_download] if args.key?(:media_download) @media_upload = args[:media_upload] if args.key?(:media_upload) @patch = args[:patch] if args.key?(:patch) @post = args[:post] if args.key?(:post) @put = args[:put] if args.key?(:put) @response_body = args[:response_body] if args.key?(:response_body) @rest_collection = args[:rest_collection] if args.key?(:rest_collection) @rest_method_name = args[:rest_method_name] if args.key?(:rest_method_name) @selector = args[:selector] if args.key?(:selector) end end # A description of a label. class LabelDescriptor include Google::Apis::Core::Hashable # A human-readable description for the label. # Corresponds to the JSON property `description` # @return [String] attr_accessor :description # The label key. # Corresponds to the JSON property `key` # @return [String] attr_accessor :key # The type of data that can be assigned to the label. # Corresponds to the JSON property `valueType` # @return [String] attr_accessor :value_type def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @description = args[:description] if args.key?(:description) @key = args[:key] if args.key?(:key) @value_type = args[:value_type] if args.key?(:value_type) end end # The response message for Operations.ListOperations. class ListOperationsResponse include Google::Apis::Core::Hashable # The standard List next-page token. # Corresponds to the JSON property `nextPageToken` # @return [String] attr_accessor :next_page_token # A list of operations that matches the specified filter in the request. # Corresponds to the JSON property `operations` # @return [Array] attr_accessor :operations def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @next_page_token = args[:next_page_token] if args.key?(:next_page_token) @operations = args[:operations] if args.key?(:operations) end end # Response message for the `ListServices` method. class ListServicesResponse include Google::Apis::Core::Hashable # Token that can be passed to `ListServices` to resume a paginated # query. # Corresponds to the JSON property `nextPageToken` # @return [String] attr_accessor :next_page_token # The available services for the requested project. # Corresponds to the JSON property `services` # @return [Array] attr_accessor :services def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @next_page_token = args[:next_page_token] if args.key?(:next_page_token) @services = args[:services] if args.key?(:services) end end # A description of a log type. Example in YAML format: # - name: library.googleapis.com/activity_history # description: The history of borrowing and returning library items. # display_name: Activity # labels: # - key: /customer_id # description: Identifier of a library customer class LogDescriptor include Google::Apis::Core::Hashable # A human-readable description of this log. This information appears in # the documentation and can contain details. # Corresponds to the JSON property `description` # @return [String] attr_accessor :description # The human-readable name for this log. This information appears on # the user interface and should be concise. # Corresponds to the JSON property `displayName` # @return [String] attr_accessor :display_name # The set of labels that are available to describe a specific log entry. # Runtime requests that contain labels not specified here are # considered invalid. # Corresponds to the JSON property `labels` # @return [Array] attr_accessor :labels # The name of the log. It must be less than 512 characters long and can # include the following characters: upper- and lower-case alphanumeric # characters [A-Za-z0-9], and punctuation characters including # slash, underscore, hyphen, period [/_-.]. # Corresponds to the JSON property `name` # @return [String] attr_accessor :name def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @description = args[:description] if args.key?(:description) @display_name = args[:display_name] if args.key?(:display_name) @labels = args[:labels] if args.key?(:labels) @name = args[:name] if args.key?(:name) end end # Logging configuration of the service. # The following example shows how to configure logs to be sent to the # producer and consumer projects. In the example, the `activity_history` # log is sent to both the producer and consumer projects, whereas the # `purchase_history` log is only sent to the producer project. # monitored_resources: # - type: library.googleapis.com/branch # labels: # - key: /city # description: The city where the library branch is located in. # - key: /name # description: The name of the branch. # logs: # - name: activity_history # labels: # - key: /customer_id # - name: purchase_history # logging: # producer_destinations: # - monitored_resource: library.googleapis.com/branch # logs: # - activity_history # - purchase_history # consumer_destinations: # - monitored_resource: library.googleapis.com/branch # logs: # - activity_history class Logging include Google::Apis::Core::Hashable # Logging configurations for sending logs to the consumer project. # There can be multiple consumer destinations, each one must have a # different monitored resource type. A log can be used in at most # one consumer destination. # Corresponds to the JSON property `consumerDestinations` # @return [Array] attr_accessor :consumer_destinations # Logging configurations for sending logs to the producer project. # There can be multiple producer destinations, each one must have a # different monitored resource type. A log can be used in at most # one producer destination. # Corresponds to the JSON property `producerDestinations` # @return [Array] attr_accessor :producer_destinations def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @consumer_destinations = args[:consumer_destinations] if args.key?(:consumer_destinations) @producer_destinations = args[:producer_destinations] if args.key?(:producer_destinations) end end # Configuration of a specific logging destination (the producer project # or the consumer project). class LoggingDestination include Google::Apis::Core::Hashable # Names of the logs to be sent to this destination. Each name must # be defined in the Service.logs section. If the log name is # not a domain scoped name, it will be automatically prefixed with # the service name followed by "/". # Corresponds to the JSON property `logs` # @return [Array] attr_accessor :logs # The monitored resource type. The type must be defined in the # Service.monitored_resources section. # Corresponds to the JSON property `monitoredResource` # @return [String] attr_accessor :monitored_resource def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @logs = args[:logs] if args.key?(:logs) @monitored_resource = args[:monitored_resource] if args.key?(:monitored_resource) end end # Defines the Media configuration for a service in case of a download. # Use this only for Scotty Requests. Do not use this for media support using # Bytestream, add instead [][google.bytestream.RestByteStream] as an API to # your configuration for Bytestream methods. class MediaDownload include Google::Apis::Core::Hashable # A boolean that determines whether a notification for the completion of a # download should be sent to the backend. # Corresponds to the JSON property `completeNotification` # @return [Boolean] attr_accessor :complete_notification alias_method :complete_notification?, :complete_notification # DO NOT USE FIELDS BELOW THIS LINE UNTIL THIS WARNING IS REMOVED. # Specify name of the download service if one is used for download. # Corresponds to the JSON property `downloadService` # @return [String] attr_accessor :download_service # Name of the Scotty dropzone to use for the current API. # Corresponds to the JSON property `dropzone` # @return [String] attr_accessor :dropzone # Whether download is enabled. # Corresponds to the JSON property `enabled` # @return [Boolean] attr_accessor :enabled alias_method :enabled?, :enabled # Optional maximum acceptable size for direct download. # The size is specified in bytes. # Corresponds to the JSON property `maxDirectDownloadSize` # @return [Fixnum] attr_accessor :max_direct_download_size # A boolean that determines if direct download from ESF should be used for # download of this media. # Corresponds to the JSON property `useDirectDownload` # @return [Boolean] attr_accessor :use_direct_download alias_method :use_direct_download?, :use_direct_download def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @complete_notification = args[:complete_notification] if args.key?(:complete_notification) @download_service = args[:download_service] if args.key?(:download_service) @dropzone = args[:dropzone] if args.key?(:dropzone) @enabled = args[:enabled] if args.key?(:enabled) @max_direct_download_size = args[:max_direct_download_size] if args.key?(:max_direct_download_size) @use_direct_download = args[:use_direct_download] if args.key?(:use_direct_download) end end # Defines the Media configuration for a service in case of an upload. # Use this only for Scotty Requests. Do not use this for media support using # Bytestream, add instead [][google.bytestream.RestByteStream] as an API to # your configuration for Bytestream methods. class MediaUpload include Google::Apis::Core::Hashable # A boolean that determines whether a notification for the completion of an # upload should be sent to the backend. These notifications will not be seen # by the client and will not consume quota. # Corresponds to the JSON property `completeNotification` # @return [Boolean] attr_accessor :complete_notification alias_method :complete_notification?, :complete_notification # Name of the Scotty dropzone to use for the current API. # Corresponds to the JSON property `dropzone` # @return [String] attr_accessor :dropzone # Whether upload is enabled. # Corresponds to the JSON property `enabled` # @return [Boolean] attr_accessor :enabled alias_method :enabled?, :enabled # Optional maximum acceptable size for an upload. # The size is specified in bytes. # Corresponds to the JSON property `maxSize` # @return [Fixnum] attr_accessor :max_size # An array of mimetype patterns. Esf will only accept uploads that match one # of the given patterns. # Corresponds to the JSON property `mimeTypes` # @return [Array] attr_accessor :mime_types # Whether to receive a notification for progress changes of media upload. # Corresponds to the JSON property `progressNotification` # @return [Boolean] attr_accessor :progress_notification alias_method :progress_notification?, :progress_notification # Whether to receive a notification on the start of media upload. # Corresponds to the JSON property `startNotification` # @return [Boolean] attr_accessor :start_notification alias_method :start_notification?, :start_notification # DO NOT USE FIELDS BELOW THIS LINE UNTIL THIS WARNING IS REMOVED. # Specify name of the upload service if one is used for upload. # Corresponds to the JSON property `uploadService` # @return [String] attr_accessor :upload_service def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @complete_notification = args[:complete_notification] if args.key?(:complete_notification) @dropzone = args[:dropzone] if args.key?(:dropzone) @enabled = args[:enabled] if args.key?(:enabled) @max_size = args[:max_size] if args.key?(:max_size) @mime_types = args[:mime_types] if args.key?(:mime_types) @progress_notification = args[:progress_notification] if args.key?(:progress_notification) @start_notification = args[:start_notification] if args.key?(:start_notification) @upload_service = args[:upload_service] if args.key?(:upload_service) end end # Method represents a method of an API interface. class MethodProp include Google::Apis::Core::Hashable # The simple name of this method. # Corresponds to the JSON property `name` # @return [String] attr_accessor :name # Any metadata attached to the method. # Corresponds to the JSON property `options` # @return [Array] attr_accessor :options # If true, the request is streamed. # Corresponds to the JSON property `requestStreaming` # @return [Boolean] attr_accessor :request_streaming alias_method :request_streaming?, :request_streaming # A URL of the input message type. # Corresponds to the JSON property `requestTypeUrl` # @return [String] attr_accessor :request_type_url # If true, the response is streamed. # Corresponds to the JSON property `responseStreaming` # @return [Boolean] attr_accessor :response_streaming alias_method :response_streaming?, :response_streaming # The URL of the output message type. # Corresponds to the JSON property `responseTypeUrl` # @return [String] attr_accessor :response_type_url # The source syntax of this method. # Corresponds to the JSON property `syntax` # @return [String] attr_accessor :syntax def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @name = args[:name] if args.key?(:name) @options = args[:options] if args.key?(:options) @request_streaming = args[:request_streaming] if args.key?(:request_streaming) @request_type_url = args[:request_type_url] if args.key?(:request_type_url) @response_streaming = args[:response_streaming] if args.key?(:response_streaming) @response_type_url = args[:response_type_url] if args.key?(:response_type_url) @syntax = args[:syntax] if args.key?(:syntax) end end # Defines a metric type and its schema. Once a metric descriptor is created, # deleting or altering it stops data collection and makes the metric type's # existing data unusable. class MetricDescriptor include Google::Apis::Core::Hashable # A detailed description of the metric, which can be used in documentation. # Corresponds to the JSON property `description` # @return [String] attr_accessor :description # A concise name for the metric, which can be displayed in user interfaces. # Use sentence case without an ending period, for example "Request count". # This field is optional but it is recommended to be set for any metrics # associated with user-visible concepts, such as Quota. # Corresponds to the JSON property `displayName` # @return [String] attr_accessor :display_name # The set of labels that can be used to describe a specific # instance of this metric type. For example, the # `appengine.googleapis.com/http/server/response_latencies` metric # type has a label for the HTTP response code, `response_code`, so # you can look at latencies for successful responses or just # for responses that failed. # Corresponds to the JSON property `labels` # @return [Array] attr_accessor :labels # Additional annotations that can be used to guide the usage of a metric. # Corresponds to the JSON property `metadata` # @return [Google::Apis::ServiceusageV1::MetricDescriptorMetadata] attr_accessor :metadata # Whether the metric records instantaneous values, changes to a value, etc. # Some combinations of `metric_kind` and `value_type` might not be supported. # Corresponds to the JSON property `metricKind` # @return [String] attr_accessor :metric_kind # The resource name of the metric descriptor. # Corresponds to the JSON property `name` # @return [String] attr_accessor :name # The metric type, including its DNS name prefix. The type is not # URL-encoded. All user-defined metric types have the DNS name # `custom.googleapis.com` or `external.googleapis.com`. Metric types should # use a natural hierarchical grouping. For example: # "custom.googleapis.com/invoice/paid/amount" # "external.googleapis.com/prometheus/up" # "appengine.googleapis.com/http/server/response_latencies" # Corresponds to the JSON property `type` # @return [String] attr_accessor :type # The unit in which the metric value is reported. It is only applicable # if the `value_type` is `INT64`, `DOUBLE`, or `DISTRIBUTION`. The # supported units are a subset of [The Unified Code for Units of # Measure](http://unitsofmeasure.org/ucum.html) standard: # **Basic units (UNIT)** # * `bit` bit # * `By` byte # * `s` second # * `min` minute # * `h` hour # * `d` day # **Prefixes (PREFIX)** # * `k` kilo (10**3) # * `M` mega (10**6) # * `G` giga (10**9) # * `T` tera (10**12) # * `P` peta (10**15) # * `E` exa (10**18) # * `Z` zetta (10**21) # * `Y` yotta (10**24) # * `m` milli (10**-3) # * `u` micro (10**-6) # * `n` nano (10**-9) # * `p` pico (10**-12) # * `f` femto (10**-15) # * `a` atto (10**-18) # * `z` zepto (10**-21) # * `y` yocto (10**-24) # * `Ki` kibi (2**10) # * `Mi` mebi (2**20) # * `Gi` gibi (2**30) # * `Ti` tebi (2**40) # **Grammar** # The grammar also includes these connectors: # * `/` division (as an infix operator, e.g. `1/s`). # * `.` multiplication (as an infix operator, e.g. `GBy.d`) # The grammar for a unit is as follows: # Expression = Component ` "." Component ` ` "/" Component ` ; # Component = ( [ PREFIX ] UNIT | "%" ) [ Annotation ] # | Annotation # | "1" # ; # Annotation = "`" NAME "`" ; # Notes: # * `Annotation` is just a comment if it follows a `UNIT` and is # equivalent to `1` if it is used alone. For examples, # ``requests`/s == 1/s`, `By`transmitted`/s == By/s`. # * `NAME` is a sequence of non-blank printable ASCII characters not # containing '`' or '`'. # * `1` represents dimensionless value 1, such as in `1/s`. # * `%` represents dimensionless value 1/100, and annotates values giving # a percentage. # Corresponds to the JSON property `unit` # @return [String] attr_accessor :unit # Whether the measurement is an integer, a floating-point number, etc. # Some combinations of `metric_kind` and `value_type` might not be supported. # Corresponds to the JSON property `valueType` # @return [String] attr_accessor :value_type def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @description = args[:description] if args.key?(:description) @display_name = args[:display_name] if args.key?(:display_name) @labels = args[:labels] if args.key?(:labels) @metadata = args[:metadata] if args.key?(:metadata) @metric_kind = args[:metric_kind] if args.key?(:metric_kind) @name = args[:name] if args.key?(:name) @type = args[:type] if args.key?(:type) @unit = args[:unit] if args.key?(:unit) @value_type = args[:value_type] if args.key?(:value_type) end end # Additional annotations that can be used to guide the usage of a metric. class MetricDescriptorMetadata include Google::Apis::Core::Hashable # The delay of data points caused by ingestion. Data points older than this # age are guaranteed to be ingested and available to be read, excluding # data loss due to errors. # Corresponds to the JSON property `ingestDelay` # @return [String] attr_accessor :ingest_delay # The launch stage of the metric definition. # Corresponds to the JSON property `launchStage` # @return [String] attr_accessor :launch_stage # The sampling period of metric data points. For metrics which are written # periodically, consecutive data points are stored at this time interval, # excluding data loss due to errors. Metrics with a higher granularity have # a smaller sampling period. # Corresponds to the JSON property `samplePeriod` # @return [String] attr_accessor :sample_period def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @ingest_delay = args[:ingest_delay] if args.key?(:ingest_delay) @launch_stage = args[:launch_stage] if args.key?(:launch_stage) @sample_period = args[:sample_period] if args.key?(:sample_period) end end # Bind API methods to metrics. Binding a method to a metric causes that # metric's configured quota behaviors to apply to the method call. class MetricRule include Google::Apis::Core::Hashable # Metrics to update when the selected methods are called, and the associated # cost applied to each metric. # The key of the map is the metric name, and the values are the amount # increased for the metric against which the quota limits are defined. # The value must not be negative. # Corresponds to the JSON property `metricCosts` # @return [Hash] attr_accessor :metric_costs # Selects the methods to which this rule applies. # Refer to selector for syntax details. # Corresponds to the JSON property `selector` # @return [String] attr_accessor :selector def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @metric_costs = args[:metric_costs] if args.key?(:metric_costs) @selector = args[:selector] if args.key?(:selector) end end # Declares an API Interface to be included in this interface. The including # interface must redeclare all the methods from the included interface, but # documentation and options are inherited as follows: # - If after comment and whitespace stripping, the documentation # string of the redeclared method is empty, it will be inherited # from the original method. # - Each annotation belonging to the service config (http, # visibility) which is not set in the redeclared method will be # inherited. # - If an http annotation is inherited, the path pattern will be # modified as follows. Any version prefix will be replaced by the # version of the including interface plus the root path if # specified. # Example of a simple mixin: # package google.acl.v1; # service AccessControl ` # // Get the underlying ACL object. # rpc GetAcl(GetAclRequest) returns (Acl) ` # option (google.api.http).get = "/v1/`resource=**`:getAcl"; # ` # ` # package google.storage.v2; # service Storage ` # // rpc GetAcl(GetAclRequest) returns (Acl); # // Get a data record. # rpc GetData(GetDataRequest) returns (Data) ` # option (google.api.http).get = "/v2/`resource=**`"; # ` # ` # Example of a mixin configuration: # apis: # - name: google.storage.v2.Storage # mixins: # - name: google.acl.v1.AccessControl # The mixin construct implies that all methods in `AccessControl` are # also declared with same name and request/response types in # `Storage`. A documentation generator or annotation processor will # see the effective `Storage.GetAcl` method after inherting # documentation and annotations as follows: # service Storage ` # // Get the underlying ACL object. # rpc GetAcl(GetAclRequest) returns (Acl) ` # option (google.api.http).get = "/v2/`resource=**`:getAcl"; # ` # ... # ` # Note how the version in the path pattern changed from `v1` to `v2`. # If the `root` field in the mixin is specified, it should be a # relative path under which inherited HTTP paths are placed. Example: # apis: # - name: google.storage.v2.Storage # mixins: # - name: google.acl.v1.AccessControl # root: acls # This implies the following inherited HTTP annotation: # service Storage ` # // Get the underlying ACL object. # rpc GetAcl(GetAclRequest) returns (Acl) ` # option (google.api.http).get = "/v2/acls/`resource=**`:getAcl"; # ` # ... # ` class Mixin include Google::Apis::Core::Hashable # The fully qualified name of the interface which is included. # Corresponds to the JSON property `name` # @return [String] attr_accessor :name # If non-empty specifies a path under which inherited HTTP paths # are rooted. # Corresponds to the JSON property `root` # @return [String] attr_accessor :root def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @name = args[:name] if args.key?(:name) @root = args[:root] if args.key?(:root) end end # An object that describes the schema of a MonitoredResource object using a # type name and a set of labels. For example, the monitored resource # descriptor for Google Compute Engine VM instances has a type of # `"gce_instance"` and specifies the use of the labels `"instance_id"` and # `"zone"` to identify particular VM instances. # Different APIs can support different monitored resource types. APIs generally # provide a `list` method that returns the monitored resource descriptors used # by the API. class MonitoredResourceDescriptor include Google::Apis::Core::Hashable # Optional. A detailed description of the monitored resource type that might # be used in documentation. # Corresponds to the JSON property `description` # @return [String] attr_accessor :description # Optional. A concise name for the monitored resource type that might be # displayed in user interfaces. It should be a Title Cased Noun Phrase, # without any article or other determiners. For example, # `"Google Cloud SQL Database"`. # Corresponds to the JSON property `displayName` # @return [String] attr_accessor :display_name # Required. A set of labels used to describe instances of this monitored # resource type. For example, an individual Google Cloud SQL database is # identified by values for the labels `"database_id"` and `"zone"`. # Corresponds to the JSON property `labels` # @return [Array] attr_accessor :labels # Optional. The resource name of the monitored resource descriptor: # `"projects/`project_id`/monitoredResourceDescriptors/`type`"` where # `type` is the value of the `type` field in this object and # `project_id` is a project ID that provides API-specific context for # accessing the type. APIs that do not use project information can use the # resource name format `"monitoredResourceDescriptors/`type`"`. # Corresponds to the JSON property `name` # @return [String] attr_accessor :name # Required. The monitored resource type. For example, the type # `"cloudsql_database"` represents databases in Google Cloud SQL. # The maximum length of this value is 256 characters. # Corresponds to the JSON property `type` # @return [String] attr_accessor :type def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @description = args[:description] if args.key?(:description) @display_name = args[:display_name] if args.key?(:display_name) @labels = args[:labels] if args.key?(:labels) @name = args[:name] if args.key?(:name) @type = args[:type] if args.key?(:type) end end # Monitoring configuration of the service. # The example below shows how to configure monitored resources and metrics # for monitoring. In the example, a monitored resource and two metrics are # defined. The `library.googleapis.com/book/returned_count` metric is sent # to both producer and consumer projects, whereas the # `library.googleapis.com/book/overdue_count` metric is only sent to the # consumer project. # monitored_resources: # - type: library.googleapis.com/branch # labels: # - key: /city # description: The city where the library branch is located in. # - key: /name # description: The name of the branch. # metrics: # - name: library.googleapis.com/book/returned_count # metric_kind: DELTA # value_type: INT64 # labels: # - key: /customer_id # - name: library.googleapis.com/book/overdue_count # metric_kind: GAUGE # value_type: INT64 # labels: # - key: /customer_id # monitoring: # producer_destinations: # - monitored_resource: library.googleapis.com/branch # metrics: # - library.googleapis.com/book/returned_count # consumer_destinations: # - monitored_resource: library.googleapis.com/branch # metrics: # - library.googleapis.com/book/returned_count # - library.googleapis.com/book/overdue_count class Monitoring include Google::Apis::Core::Hashable # Monitoring configurations for sending metrics to the consumer project. # There can be multiple consumer destinations, each one must have a # different monitored resource type. A metric can be used in at most # one consumer destination. # Corresponds to the JSON property `consumerDestinations` # @return [Array] attr_accessor :consumer_destinations # Monitoring configurations for sending metrics to the producer project. # There can be multiple producer destinations, each one must have a # different monitored resource type. A metric can be used in at most # one producer destination. # Corresponds to the JSON property `producerDestinations` # @return [Array] attr_accessor :producer_destinations def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @consumer_destinations = args[:consumer_destinations] if args.key?(:consumer_destinations) @producer_destinations = args[:producer_destinations] if args.key?(:producer_destinations) end end # Configuration of a specific monitoring destination (the producer project # or the consumer project). class MonitoringDestination include Google::Apis::Core::Hashable # Names of the metrics to report to this monitoring destination. # Each name must be defined in Service.metrics section. # Corresponds to the JSON property `metrics` # @return [Array] attr_accessor :metrics # The monitored resource type. The type must be defined in # Service.monitored_resources section. # Corresponds to the JSON property `monitoredResource` # @return [String] attr_accessor :monitored_resource def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @metrics = args[:metrics] if args.key?(:metrics) @monitored_resource = args[:monitored_resource] if args.key?(:monitored_resource) end end # OAuth scopes are a way to define data and permissions on data. For example, # there are scopes defined for "Read-only access to Google Calendar" and # "Access to Cloud Platform". Users can consent to a scope for an application, # giving it permission to access that data on their behalf. # OAuth scope specifications should be fairly coarse grained; a user will need # to see and understand the text description of what your scope means. # In most cases: use one or at most two OAuth scopes for an entire family of # products. If your product has multiple APIs, you should probably be sharing # the OAuth scope across all of those APIs. # When you need finer grained OAuth consent screens: talk with your product # management about how developers will use them in practice. # Please note that even though each of the canonical scopes is enough for a # request to be accepted and passed to the backend, a request can still fail # due to the backend requiring additional scopes or permissions. class OAuthRequirements include Google::Apis::Core::Hashable # The list of publicly documented OAuth scopes that are allowed access. An # OAuth token containing any of these scopes will be accepted. # Example: # canonical_scopes: https://www.googleapis.com/auth/calendar, # https://www.googleapis.com/auth/calendar.read # Corresponds to the JSON property `canonicalScopes` # @return [String] attr_accessor :canonical_scopes def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @canonical_scopes = args[:canonical_scopes] if args.key?(:canonical_scopes) end end # This resource represents a long-running operation that is the result of a # network API call. class Operation include Google::Apis::Core::Hashable # If the value is `false`, it means the operation is still in progress. # If `true`, the operation is completed, and either `error` or `response` is # available. # Corresponds to the JSON property `done` # @return [Boolean] attr_accessor :done alias_method :done?, :done # The `Status` type defines a logical error model that is suitable for different # programming environments, including REST APIs and RPC APIs. It is used by # [gRPC](https://github.com/grpc). The error model is designed to be: # - Simple to use and understand for most users # - Flexible enough to meet unexpected needs # # Overview # The `Status` message contains three pieces of data: error code, error message, # and error details. The error code should be an enum value of # google.rpc.Code, but it may accept additional error codes if needed. The # error message should be a developer-facing English message that helps # developers *understand* and *resolve* the error. If a localized user-facing # error message is needed, put the localized message in the error details or # localize it in the client. The optional error details may contain arbitrary # information about the error. There is a predefined set of error detail types # in the package `google.rpc` that can be used for common error conditions. # # Language mapping # The `Status` message is the logical representation of the error model, but it # is not necessarily the actual wire format. When the `Status` message is # exposed in different client libraries and different wire protocols, it can be # mapped differently. For example, it will likely be mapped to some exceptions # in Java, but more likely mapped to some error codes in C. # # Other uses # The error model and the `Status` message can be used in a variety of # environments, either with or without APIs, to provide a # consistent developer experience across different environments. # Example uses of this error model include: # - Partial errors. If a service needs to return partial errors to the client, # it may embed the `Status` in the normal response to indicate the partial # errors. # - Workflow errors. A typical workflow has multiple steps. Each step may # have a `Status` message for error reporting. # - Batch operations. If a client uses batch request and batch response, the # `Status` message should be used directly inside batch response, one for # each error sub-response. # - Asynchronous operations. If an API call embeds asynchronous operation # results in its response, the status of those operations should be # represented directly using the `Status` message. # - Logging. If some API errors are stored in logs, the message `Status` could # be used directly after any stripping needed for security/privacy reasons. # Corresponds to the JSON property `error` # @return [Google::Apis::ServiceusageV1::Status] attr_accessor :error # Service-specific metadata associated with the operation. It typically # contains progress information and common metadata such as create time. # Some services might not provide such metadata. Any method that returns a # long-running operation should document the metadata type, if any. # Corresponds to the JSON property `metadata` # @return [Hash] attr_accessor :metadata # The server-assigned name, which is only unique within the same service that # originally returns it. If you use the default HTTP mapping, the # `name` should have the format of `operations/some/unique/name`. # Corresponds to the JSON property `name` # @return [String] attr_accessor :name # The normal response of the operation in case of success. If the original # method returns no data on success, such as `Delete`, the response is # `google.protobuf.Empty`. If the original method is standard # `Get`/`Create`/`Update`, the response should be the resource. For other # methods, the response should have the type `XxxResponse`, where `Xxx` # is the original method name. For example, if the original method name # is `TakeSnapshot()`, the inferred response type is # `TakeSnapshotResponse`. # Corresponds to the JSON property `response` # @return [Hash] attr_accessor :response def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @done = args[:done] if args.key?(:done) @error = args[:error] if args.key?(:error) @metadata = args[:metadata] if args.key?(:metadata) @name = args[:name] if args.key?(:name) @response = args[:response] if args.key?(:response) end end # The operation metadata returned for the batchend services operation. class OperationMetadata include Google::Apis::Core::Hashable # The full name of the resources that this operation is directly # associated with. # Corresponds to the JSON property `resourceNames` # @return [Array] attr_accessor :resource_names def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @resource_names = args[:resource_names] if args.key?(:resource_names) end end # A protocol buffer option, which can be attached to a message, field, # enumeration, etc. class Option include Google::Apis::Core::Hashable # The option's name. For protobuf built-in options (options defined in # descriptor.proto), this is the short name. For example, `"map_entry"`. # For custom options, it should be the fully-qualified name. For example, # `"google.api.http"`. # Corresponds to the JSON property `name` # @return [String] attr_accessor :name # The option's value packed in an Any message. If the value is a primitive, # the corresponding wrapper type defined in google/protobuf/wrappers.proto # should be used. If the value is an enum, it should be stored as an int32 # value using the google.protobuf.Int32Value type. # Corresponds to the JSON property `value` # @return [Hash] attr_accessor :value def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @name = args[:name] if args.key?(:name) @value = args[:value] if args.key?(:value) end end # Represents a documentation page. A page can contain subpages to represent # nested documentation set structure. class Page include Google::Apis::Core::Hashable # The Markdown content of the page. You can use (== include `path` ==&# # 41; # to include content from a Markdown file. # Corresponds to the JSON property `content` # @return [String] attr_accessor :content # The name of the page. It will be used as an identity of the page to # generate URI of the page, text of the link to this page in navigation, # etc. The full page name (start from the root page name to this page # concatenated with `.`) can be used as reference to the page in your # documentation. For example: #
pages:
        # - name: Tutorial
        # content: (== include tutorial.md ==)
        # subpages:
        # - name: Java
        # content: (== include tutorial_java.md ==)
        # 
# You can reference `Java` page using Markdown reference link syntax: # `Java`. # Corresponds to the JSON property `name` # @return [String] attr_accessor :name # Subpages of this page. The order of subpages specified here will be # honored in the generated docset. # Corresponds to the JSON property `subpages` # @return [Array] attr_accessor :subpages def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @content = args[:content] if args.key?(:content) @name = args[:name] if args.key?(:name) @subpages = args[:subpages] if args.key?(:subpages) end end # Quota configuration helps to achieve fairness and budgeting in service # usage. # The quota configuration works this way: # - The service configuration defines a set of metrics. # - For API calls, the quota.metric_rules maps methods to metrics with # corresponding costs. # - The quota.limits defines limits on the metrics, which will be used for # quota checks at runtime. # An example quota configuration in yaml format: # quota: # - name: apiWriteQpsPerProject # metric: library.googleapis.com/write_calls # unit: "1/min/`project`" # rate limit for consumer projects # values: # STANDARD: 10000 # # The metric rules bind all methods to the read_calls metric, # # except for the UpdateBook and DeleteBook methods. These two methods # # are mapped to the write_calls metric, with the UpdateBook method # # consuming at twice rate as the DeleteBook method. # metric_rules: # - selector: "*" # metric_costs: # library.googleapis.com/read_calls: 1 # - selector: google.example.library.v1.LibraryService.UpdateBook # metric_costs: # library.googleapis.com/write_calls: 2 # - selector: google.example.library.v1.LibraryService.DeleteBook # metric_costs: # library.googleapis.com/write_calls: 1 # Corresponding Metric definition: # metrics: # - name: library.googleapis.com/read_calls # display_name: Read requests # metric_kind: DELTA # value_type: INT64 # - name: library.googleapis.com/write_calls # display_name: Write requests # metric_kind: DELTA # value_type: INT64 class Quota include Google::Apis::Core::Hashable # List of `QuotaLimit` definitions for the service. # Corresponds to the JSON property `limits` # @return [Array] attr_accessor :limits # List of `MetricRule` definitions, each one mapping a selected method to one # or more metrics. # Corresponds to the JSON property `metricRules` # @return [Array] attr_accessor :metric_rules def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @limits = args[:limits] if args.key?(:limits) @metric_rules = args[:metric_rules] if args.key?(:metric_rules) end end # `QuotaLimit` defines a specific limit that applies over a specified duration # for a limit type. There can be at most one limit for a duration and limit # type combination defined within a `QuotaGroup`. class QuotaLimit include Google::Apis::Core::Hashable # Default number of tokens that can be consumed during the specified # duration. This is the number of tokens assigned when a client # application developer activates the service for his/her project. # Specifying a value of 0 will block all requests. This can be used if you # are provisioning quota to selected consumers and blocking others. # Similarly, a value of -1 will indicate an unlimited quota. No other # negative values are allowed. # Used by group-based quotas only. # Corresponds to the JSON property `defaultLimit` # @return [Fixnum] attr_accessor :default_limit # Optional. User-visible, extended description for this quota limit. # Should be used only when more context is needed to understand this limit # than provided by the limit's display name (see: `display_name`). # Corresponds to the JSON property `description` # @return [String] attr_accessor :description # User-visible display name for this limit. # Optional. If not set, the UI will provide a default display name based on # the quota configuration. This field can be used to override the default # display name generated from the configuration. # Corresponds to the JSON property `displayName` # @return [String] attr_accessor :display_name # Duration of this limit in textual notation. Example: "100s", "24h", "1d". # For duration longer than a day, only multiple of days is supported. We # support only "100s" and "1d" for now. Additional support will be added in # the future. "0" indicates indefinite duration. # Used by group-based quotas only. # Corresponds to the JSON property `duration` # @return [String] attr_accessor :duration # Free tier value displayed in the Developers Console for this limit. # The free tier is the number of tokens that will be subtracted from the # billed amount when billing is enabled. # This field can only be set on a limit with duration "1d", in a billable # group; it is invalid on any other limit. If this field is not set, it # defaults to 0, indicating that there is no free tier for this service. # Used by group-based quotas only. # Corresponds to the JSON property `freeTier` # @return [Fixnum] attr_accessor :free_tier # Maximum number of tokens that can be consumed during the specified # duration. Client application developers can override the default limit up # to this maximum. If specified, this value cannot be set to a value less # than the default limit. If not specified, it is set to the default limit. # To allow clients to apply overrides with no upper bound, set this to -1, # indicating unlimited maximum quota. # Used by group-based quotas only. # Corresponds to the JSON property `maxLimit` # @return [Fixnum] attr_accessor :max_limit # The name of the metric this quota limit applies to. The quota limits with # the same metric will be checked together during runtime. The metric must be # defined within the service config. # Corresponds to the JSON property `metric` # @return [String] attr_accessor :metric # Name of the quota limit. # The name must be provided, and it must be unique within the service. The # name can only include alphanumeric characters as well as '-'. # The maximum length of the limit name is 64 characters. # Corresponds to the JSON property `name` # @return [String] attr_accessor :name # Specify the unit of the quota limit. It uses the same syntax as # Metric.unit. The supported unit kinds are determined by the quota # backend system. # Here are some examples: # * "1/min/`project`" for quota per minute per project. # Note: the order of unit components is insignificant. # The "1" at the beginning is required to follow the metric unit syntax. # Corresponds to the JSON property `unit` # @return [String] attr_accessor :unit # Tiered limit values. You must specify this as a key:value pair, with an # integer value that is the maximum number of requests allowed for the # specified unit. Currently only STANDARD is supported. # Corresponds to the JSON property `values` # @return [Hash] attr_accessor :values def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @default_limit = args[:default_limit] if args.key?(:default_limit) @description = args[:description] if args.key?(:description) @display_name = args[:display_name] if args.key?(:display_name) @duration = args[:duration] if args.key?(:duration) @free_tier = args[:free_tier] if args.key?(:free_tier) @max_limit = args[:max_limit] if args.key?(:max_limit) @metric = args[:metric] if args.key?(:metric) @name = args[:name] if args.key?(:name) @unit = args[:unit] if args.key?(:unit) @values = args[:values] if args.key?(:values) end end # `SourceContext` represents information about the source of a # protobuf element, like the file in which it is defined. class SourceContext include Google::Apis::Core::Hashable # The path-qualified name of the .proto file that contained the associated # protobuf element. For example: `"google/protobuf/source_context.proto"`. # Corresponds to the JSON property `fileName` # @return [String] attr_accessor :file_name def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @file_name = args[:file_name] if args.key?(:file_name) end end # Source information used to create a Service Config class SourceInfo include Google::Apis::Core::Hashable # All files used during config generation. # Corresponds to the JSON property `sourceFiles` # @return [Array>] attr_accessor :source_files def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @source_files = args[:source_files] if args.key?(:source_files) end end # The `Status` type defines a logical error model that is suitable for different # programming environments, including REST APIs and RPC APIs. It is used by # [gRPC](https://github.com/grpc). The error model is designed to be: # - Simple to use and understand for most users # - Flexible enough to meet unexpected needs # # Overview # The `Status` message contains three pieces of data: error code, error message, # and error details. The error code should be an enum value of # google.rpc.Code, but it may accept additional error codes if needed. The # error message should be a developer-facing English message that helps # developers *understand* and *resolve* the error. If a localized user-facing # error message is needed, put the localized message in the error details or # localize it in the client. The optional error details may contain arbitrary # information about the error. There is a predefined set of error detail types # in the package `google.rpc` that can be used for common error conditions. # # Language mapping # The `Status` message is the logical representation of the error model, but it # is not necessarily the actual wire format. When the `Status` message is # exposed in different client libraries and different wire protocols, it can be # mapped differently. For example, it will likely be mapped to some exceptions # in Java, but more likely mapped to some error codes in C. # # Other uses # The error model and the `Status` message can be used in a variety of # environments, either with or without APIs, to provide a # consistent developer experience across different environments. # Example uses of this error model include: # - Partial errors. If a service needs to return partial errors to the client, # it may embed the `Status` in the normal response to indicate the partial # errors. # - Workflow errors. A typical workflow has multiple steps. Each step may # have a `Status` message for error reporting. # - Batch operations. If a client uses batch request and batch response, the # `Status` message should be used directly inside batch response, one for # each error sub-response. # - Asynchronous operations. If an API call embeds asynchronous operation # results in its response, the status of those operations should be # represented directly using the `Status` message. # - Logging. If some API errors are stored in logs, the message `Status` could # be used directly after any stripping needed for security/privacy reasons. class Status include Google::Apis::Core::Hashable # The status code, which should be an enum value of google.rpc.Code. # Corresponds to the JSON property `code` # @return [Fixnum] attr_accessor :code # A list of messages that carry the error details. There is a common set of # message types for APIs to use. # Corresponds to the JSON property `details` # @return [Array>] attr_accessor :details # A developer-facing error message, which should be in English. Any # user-facing error message should be localized and sent in the # google.rpc.Status.details field, or localized by the client. # Corresponds to the JSON property `message` # @return [String] attr_accessor :message def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @code = args[:code] if args.key?(:code) @details = args[:details] if args.key?(:details) @message = args[:message] if args.key?(:message) end end # Define a parameter's name and location. The parameter may be passed as either # an HTTP header or a URL query parameter, and if both are passed the behavior # is implementation-dependent. class SystemParameter include Google::Apis::Core::Hashable # Define the HTTP header name to use for the parameter. It is case # insensitive. # Corresponds to the JSON property `httpHeader` # @return [String] attr_accessor :http_header # Define the name of the parameter, such as "api_key" . It is case sensitive. # Corresponds to the JSON property `name` # @return [String] attr_accessor :name # Define the URL query parameter name to use for the parameter. It is case # sensitive. # Corresponds to the JSON property `urlQueryParameter` # @return [String] attr_accessor :url_query_parameter def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @http_header = args[:http_header] if args.key?(:http_header) @name = args[:name] if args.key?(:name) @url_query_parameter = args[:url_query_parameter] if args.key?(:url_query_parameter) end end # Define a system parameter rule mapping system parameter definitions to # methods. class SystemParameterRule include Google::Apis::Core::Hashable # Define parameters. Multiple names may be defined for a parameter. # For a given method call, only one of them should be used. If multiple # names are used the behavior is implementation-dependent. # If none of the specified names are present the behavior is # parameter-dependent. # Corresponds to the JSON property `parameters` # @return [Array] attr_accessor :parameters # Selects the methods to which this rule applies. Use '*' to indicate all # methods in all APIs. # Refer to selector for syntax details. # Corresponds to the JSON property `selector` # @return [String] attr_accessor :selector def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @parameters = args[:parameters] if args.key?(:parameters) @selector = args[:selector] if args.key?(:selector) end end # ### System parameter configuration # A system parameter is a special kind of parameter defined by the API # system, not by an individual API. It is typically mapped to an HTTP header # and/or a URL query parameter. This configuration specifies which methods # change the names of the system parameters. class SystemParameters include Google::Apis::Core::Hashable # Define system parameters. # The parameters defined here will override the default parameters # implemented by the system. If this field is missing from the service # config, default system parameters will be used. Default system parameters # and names is implementation-dependent. # Example: define api key for all methods # system_parameters # rules: # - selector: "*" # parameters: # - name: api_key # url_query_parameter: api_key # Example: define 2 api key names for a specific method. # system_parameters # rules: # - selector: "/ListShelves" # parameters: # - name: api_key # http_header: Api-Key1 # - name: api_key # http_header: Api-Key2 # **NOTE:** All service configuration rules follow "last one wins" order. # Corresponds to the JSON property `rules` # @return [Array] attr_accessor :rules def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @rules = args[:rules] if args.key?(:rules) end end # A protocol buffer message type. class Type include Google::Apis::Core::Hashable # The list of fields. # Corresponds to the JSON property `fields` # @return [Array] attr_accessor :fields # The fully qualified message name. # Corresponds to the JSON property `name` # @return [String] attr_accessor :name # The list of types appearing in `oneof` definitions in this type. # Corresponds to the JSON property `oneofs` # @return [Array] attr_accessor :oneofs # The protocol buffer options. # Corresponds to the JSON property `options` # @return [Array] attr_accessor :options # `SourceContext` represents information about the source of a # protobuf element, like the file in which it is defined. # Corresponds to the JSON property `sourceContext` # @return [Google::Apis::ServiceusageV1::SourceContext] attr_accessor :source_context # The source syntax. # Corresponds to the JSON property `syntax` # @return [String] attr_accessor :syntax def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @fields = args[:fields] if args.key?(:fields) @name = args[:name] if args.key?(:name) @oneofs = args[:oneofs] if args.key?(:oneofs) @options = args[:options] if args.key?(:options) @source_context = args[:source_context] if args.key?(:source_context) @syntax = args[:syntax] if args.key?(:syntax) end end # Configuration controlling usage of a service. class Usage include Google::Apis::Core::Hashable # The full resource name of a channel used for sending notifications to the # service producer. # Google Service Management currently only supports # [Google Cloud Pub/Sub](https://cloud.google.com/pubsub) as a notification # channel. To use Google Cloud Pub/Sub as the channel, this must be the name # of a Cloud Pub/Sub topic that uses the Cloud Pub/Sub topic name format # documented in https://cloud.google.com/pubsub/docs/overview. # Corresponds to the JSON property `producerNotificationChannel` # @return [String] attr_accessor :producer_notification_channel # Requirements that must be satisfied before a consumer project can use the # service. Each requirement is of the form /; # for example 'serviceusage.googleapis.com/billing-enabled'. # Corresponds to the JSON property `requirements` # @return [Array] attr_accessor :requirements # A list of usage rules that apply to individual API methods. # **NOTE:** All service configuration rules follow "last one wins" order. # Corresponds to the JSON property `rules` # @return [Array] attr_accessor :rules def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @producer_notification_channel = args[:producer_notification_channel] if args.key?(:producer_notification_channel) @requirements = args[:requirements] if args.key?(:requirements) @rules = args[:rules] if args.key?(:rules) end end # Usage configuration rules for the service. # NOTE: Under development. # Use this rule to configure unregistered calls for the service. Unregistered # calls are calls that do not contain consumer project identity. # (Example: calls that do not contain an API key). # By default, API methods do not allow unregistered calls, and each method call # must be identified by a consumer project identity. Use this rule to # allow/disallow unregistered calls. # Example of an API that wants to allow unregistered calls for entire service. # usage: # rules: # - selector: "*" # allow_unregistered_calls: true # Example of a method that wants to allow unregistered calls. # usage: # rules: # - selector: "google.example.library.v1.LibraryService.CreateBook" # allow_unregistered_calls: true class UsageRule include Google::Apis::Core::Hashable # If true, the selected method allows unregistered calls, e.g. calls # that don't identify any user or application. # Corresponds to the JSON property `allowUnregisteredCalls` # @return [Boolean] attr_accessor :allow_unregistered_calls alias_method :allow_unregistered_calls?, :allow_unregistered_calls # Selects the methods to which this rule applies. Use '*' to indicate all # methods in all APIs. # Refer to selector for syntax details. # Corresponds to the JSON property `selector` # @return [String] attr_accessor :selector # If true, the selected method should skip service control and the control # plane features, such as quota and billing, will not be available. # This flag is used by Google Cloud Endpoints to bypass checks for internal # methods, such as service health check methods. # Corresponds to the JSON property `skipServiceControl` # @return [Boolean] attr_accessor :skip_service_control alias_method :skip_service_control?, :skip_service_control def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @allow_unregistered_calls = args[:allow_unregistered_calls] if args.key?(:allow_unregistered_calls) @selector = args[:selector] if args.key?(:selector) @skip_service_control = args[:skip_service_control] if args.key?(:skip_service_control) end end end end end