# Copyright 2015 Google Inc. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. require 'date' require 'google/apis/core/base_service' require 'google/apis/core/json_representation' require 'google/apis/core/hashable' require 'google/apis/errors' module Google module Apis module GenomicsV2alpha1 # Carries information about an accelerator that can be attached to a VM. class Accelerator include Google::Apis::Core::Hashable # How many accelerators of this type to attach. # Corresponds to the JSON property `count` # @return [Fixnum] attr_accessor :count # The accelerator type string (for example, "nvidia-tesla-k80"). # Only NVIDIA GPU accelerators are currently supported. If an NVIDIA GPU is # attached, the required runtime libraries will be made available to all # containers under `/usr/local/nvidia`. The driver version to install must # be specified using the NVIDIA driver version parameter on the virtual # machine specification. Note that attaching a GPU increases the worker VM # startup time by a few minutes. # Corresponds to the JSON property `type` # @return [String] attr_accessor :type def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @count = args[:count] if args.key?(:count) @type = args[:type] if args.key?(:type) end end # Specifies a single action that runs a Docker container. class Action include Google::Apis::Core::Hashable # If specified, overrides the `CMD` specified in the container. If the # container also has an `ENTRYPOINT` the values are used as entrypoint # arguments. Otherwise, they are used as a command and arguments to run # inside the container. # Corresponds to the JSON property `commands` # @return [Array] attr_accessor :commands # Holds encrypted information that is only decrypted and stored in RAM # by the worker VM when running the pipeline. # Corresponds to the JSON property `credentials` # @return [Google::Apis::GenomicsV2alpha1::Secret] attr_accessor :credentials # If specified, overrides the `ENTRYPOINT` specified in the container. # Corresponds to the JSON property `entrypoint` # @return [String] attr_accessor :entrypoint # The environment to pass into the container. This environment is merged # with values specified in the google.genomics.v2alpha1.Pipeline # message, overwriting any duplicate values. # In addition to the values passed here, a few other values are # automatically injected into the environment. These cannot be hidden or # overwritten. # `GOOGLE_PIPELINE_FAILED` will be set to "1" if the pipeline failed # because an action has exited with a non-zero status (and did not have the # `IGNORE_EXIT_STATUS` flag set). This can be used to determine if additional # debug or logging actions should execute. # `GOOGLE_LAST_EXIT_STATUS` will be set to the exit status of the last # non-background action that executed. This can be used by workflow engine # authors to determine whether an individual action has succeeded or failed. # Corresponds to the JSON property `environment` # @return [Hash] attr_accessor :environment # The set of flags to apply to this action. # Corresponds to the JSON property `flags` # @return [Array] attr_accessor :flags # Required. The URI to pull the container image from. Note that all images # referenced # by actions in the pipeline are pulled before the first action runs. If # multiple actions reference the same image, it is only pulled once, # ensuring that the same image is used for all actions in a single pipeline. # The image URI can be either a complete host and image specification (e.g., # quay.io/biocontainers/samtools), a library and image name (e.g., # google/cloud-sdk) or a bare image name ('bash') to pull from the default # library. No schema is required in any of these cases. # If the specified image is not public, the service account specified for # the Virtual Machine must have access to pull the images from GCR, or # appropriate credentials must be specified in the # google.genomics.v2alpha1.Action.credentials field. # Corresponds to the JSON property `imageUri` # @return [String] attr_accessor :image_uri # Labels to associate with the action. This field is provided to assist # workflow engine authors in identifying actions (for example, to indicate # what sort of action they perform, such as localization or debugging). # They are returned in the operation metadata, but are otherwise ignored. # Corresponds to the JSON property `labels` # @return [Hash] attr_accessor :labels # A list of mounts to make available to the action. # In addition to the values specified here, every action has a special # virtual disk mounted under `/google` that contains log files and other # operational components. #
    #
  • /google/logs All logs written during the pipeline # execution.
  • #
  • /google/logs/output The combined standard output and # standard error of all actions run as part of the pipeline # execution.
  • #
  • /google/logs/action/*/stdout The complete contents of # each individual action's standard output.
  • #
  • /google/logs/action/*/stderr The complete contents of # each individual action's standard error output.
  • #
# Corresponds to the JSON property `mounts` # @return [Array] attr_accessor :mounts # An optional name for the container. The container hostname will be set to # this name, making it useful for inter-container communication. The name # must contain only upper and lowercase alphanumeric characters and hypens # and cannot start with a hyphen. # Corresponds to the JSON property `name` # @return [String] attr_accessor :name # An optional identifier for a PID namespace to run the action inside. # Multiple actions should use the same string to share a namespace. If # unspecified, a separate isolated namespace is used. # Corresponds to the JSON property `pidNamespace` # @return [String] attr_accessor :pid_namespace # A map of containers to host port mappings for this container. If the # container already specifies exposed ports, use the # `PUBLISH_EXPOSED_PORTS` flag instead. # The host port number must be less than 65536. If it is zero, an unused # random port is assigned. To determine the resulting port number, consult # the `ContainerStartedEvent` in the operation metadata. # Corresponds to the JSON property `portMappings` # @return [Hash] attr_accessor :port_mappings # The maximum amount of time to give the action to complete. If the action # fails to complete before the timeout, it will be terminated and the exit # status will be non-zero. The pipeline will continue or terminate based # on the rules defined by the `ALWAYS_RUN` and `IGNORE_EXIT_STATUS` flags. # Corresponds to the JSON property `timeout` # @return [String] attr_accessor :timeout def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @commands = args[:commands] if args.key?(:commands) @credentials = args[:credentials] if args.key?(:credentials) @entrypoint = args[:entrypoint] if args.key?(:entrypoint) @environment = args[:environment] if args.key?(:environment) @flags = args[:flags] if args.key?(:flags) @image_uri = args[:image_uri] if args.key?(:image_uri) @labels = args[:labels] if args.key?(:labels) @mounts = args[:mounts] if args.key?(:mounts) @name = args[:name] if args.key?(:name) @pid_namespace = args[:pid_namespace] if args.key?(:pid_namespace) @port_mappings = args[:port_mappings] if args.key?(:port_mappings) @timeout = args[:timeout] if args.key?(:timeout) end end # The request message for Operations.CancelOperation. class CancelOperationRequest include Google::Apis::Core::Hashable def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) end end # The parameters to the CheckIn method. class CheckInRequest include Google::Apis::Core::Hashable # A generic empty message that you can re-use to avoid defining duplicated # empty messages in your APIs. A typical example is to use it as the request # or the response type of an API method. For instance: # service Foo ` # rpc Bar(google.protobuf.Empty) returns (google.protobuf.Empty); # ` # The JSON representation for `Empty` is empty JSON object ````. # Corresponds to the JSON property `deadlineExpired` # @return [Google::Apis::GenomicsV2alpha1::Empty] attr_accessor :deadline_expired # A workflow specific event occurred. # Corresponds to the JSON property `event` # @return [Hash] attr_accessor :event # A list of timestamped events. # Corresponds to the JSON property `events` # @return [Array] attr_accessor :events # The `Status` type defines a logical error model that is suitable for # different programming environments, including REST APIs and RPC APIs. It is # used by [gRPC](https://github.com/grpc). Each `Status` message contains # three pieces of data: error code, error message, and error details. # You can find out more about this error model and how to work with it in the # [API Design Guide](https://cloud.google.com/apis/design/errors). # Corresponds to the JSON property `result` # @return [Google::Apis::GenomicsV2alpha1::Status] attr_accessor :result # The status of the worker VM. # Corresponds to the JSON property `workerStatus` # @return [Google::Apis::GenomicsV2alpha1::WorkerStatus] attr_accessor :worker_status def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @deadline_expired = args[:deadline_expired] if args.key?(:deadline_expired) @event = args[:event] if args.key?(:event) @events = args[:events] if args.key?(:events) @result = args[:result] if args.key?(:result) @worker_status = args[:worker_status] if args.key?(:worker_status) end end # The response to the CheckIn method. class CheckInResponse include Google::Apis::Core::Hashable # The deadline by which the worker must request an extension. The backend # will allow for network transmission time and other delays, but the worker # must attempt to transmit the extension request no later than the deadline. # Corresponds to the JSON property `deadline` # @return [String] attr_accessor :deadline # The metadata that describes the operation assigned to the worker. # Corresponds to the JSON property `metadata` # @return [Hash] attr_accessor :metadata def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @deadline = args[:deadline] if args.key?(:deadline) @metadata = args[:metadata] if args.key?(:metadata) end end # Describes a Compute Engine resource that is being managed by a running # pipeline. class ComputeEngine include Google::Apis::Core::Hashable # The names of the disks that were created for this pipeline. # Corresponds to the JSON property `diskNames` # @return [Array] attr_accessor :disk_names # The instance on which the operation is running. # Corresponds to the JSON property `instanceName` # @return [String] attr_accessor :instance_name # The machine type of the instance. # Corresponds to the JSON property `machineType` # @return [String] attr_accessor :machine_type # The availability zone in which the instance resides. # Corresponds to the JSON property `zone` # @return [String] attr_accessor :zone def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @disk_names = args[:disk_names] if args.key?(:disk_names) @instance_name = args[:instance_name] if args.key?(:instance_name) @machine_type = args[:machine_type] if args.key?(:machine_type) @zone = args[:zone] if args.key?(:zone) end end # An event generated when a container is forcibly terminated by the # worker. Currently, this only occurs when the container outlives the # timeout specified by the user. class ContainerKilledEvent include Google::Apis::Core::Hashable # The numeric ID of the action that started the container. # Corresponds to the JSON property `actionId` # @return [Fixnum] attr_accessor :action_id def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @action_id = args[:action_id] if args.key?(:action_id) end end # An event generated when a container starts. class ContainerStartedEvent include Google::Apis::Core::Hashable # The numeric ID of the action that started this container. # Corresponds to the JSON property `actionId` # @return [Fixnum] attr_accessor :action_id # The public IP address that can be used to connect to the container. This # field is only populated when at least one port mapping is present. If the # instance was created with a private address, this field will be empty even # if port mappings exist. # Corresponds to the JSON property `ipAddress` # @return [String] attr_accessor :ip_address # The container-to-host port mappings installed for this container. This # set will contain any ports exposed using the `PUBLISH_EXPOSED_PORTS` flag # as well as any specified in the `Action` definition. # Corresponds to the JSON property `portMappings` # @return [Hash] attr_accessor :port_mappings def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @action_id = args[:action_id] if args.key?(:action_id) @ip_address = args[:ip_address] if args.key?(:ip_address) @port_mappings = args[:port_mappings] if args.key?(:port_mappings) end end # An event generated when a container exits. class ContainerStoppedEvent include Google::Apis::Core::Hashable # The numeric ID of the action that started this container. # Corresponds to the JSON property `actionId` # @return [Fixnum] attr_accessor :action_id # The exit status of the container. # Corresponds to the JSON property `exitStatus` # @return [Fixnum] attr_accessor :exit_status # The tail end of any content written to standard error by the container. # If the content emits large amounts of debugging noise or contains # sensitive information, you can prevent the content from being printed by # setting the `DISABLE_STANDARD_ERROR_CAPTURE` flag. # Note that only a small amount of the end of the stream is captured here. # The entire stream is stored in the `/google/logs` directory mounted into # each action, and can be copied off the machine as described elsewhere. # Corresponds to the JSON property `stderr` # @return [String] attr_accessor :stderr def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @action_id = args[:action_id] if args.key?(:action_id) @exit_status = args[:exit_status] if args.key?(:exit_status) @stderr = args[:stderr] if args.key?(:stderr) end end # An event generated whenever a resource limitation or transient error # delays execution of a pipeline that was otherwise ready to run. class DelayedEvent include Google::Apis::Core::Hashable # A textual description of the cause of the delay. The string can change # without notice because it is often generated by another service (such as # Compute Engine). # Corresponds to the JSON property `cause` # @return [String] attr_accessor :cause # If the delay was caused by a resource shortage, this field lists the # Compute Engine metrics that are preventing this operation from running # (for example, `CPUS` or `INSTANCES`). If the particular metric is not # known, a single `UNKNOWN` metric will be present. # Corresponds to the JSON property `metrics` # @return [Array] attr_accessor :metrics def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @cause = args[:cause] if args.key?(:cause) @metrics = args[:metrics] if args.key?(:metrics) end end # Carries information about a disk that can be attached to a VM. # See https://cloud.google.com/compute/docs/disks/performance for more # information about disk type, size, and performance considerations. class Disk include Google::Apis::Core::Hashable # A user-supplied name for the disk. Used when mounting the disk into # actions. The name must contain only upper and lowercase alphanumeric # characters and hypens and cannot start with a hyphen. # Corresponds to the JSON property `name` # @return [String] attr_accessor :name # The size, in GB, of the disk to attach. If the size is not # specified, a default is chosen to ensure reasonable I/O performance. # If the disk type is specified as `local-ssd`, multiple local drives are # automatically combined to provide the requested size. Note, however, that # each physical SSD is 375GB in size, and no more than 8 drives can be # attached to a single instance. # Corresponds to the JSON property `sizeGb` # @return [Fixnum] attr_accessor :size_gb # An optional image to put on the disk before attaching it to the VM. # Corresponds to the JSON property `sourceImage` # @return [String] attr_accessor :source_image # The Compute Engine disk type. If unspecified, `pd-standard` is used. # Corresponds to the JSON property `type` # @return [String] attr_accessor :type def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @name = args[:name] if args.key?(:name) @size_gb = args[:size_gb] if args.key?(:size_gb) @source_image = args[:source_image] if args.key?(:source_image) @type = args[:type] if args.key?(:type) end end # The status of a disk on a VM. class DiskStatus include Google::Apis::Core::Hashable # Free disk space. # Corresponds to the JSON property `freeSpaceBytes` # @return [Fixnum] attr_accessor :free_space_bytes # Total disk space. # Corresponds to the JSON property `totalSpaceBytes` # @return [Fixnum] attr_accessor :total_space_bytes def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @free_space_bytes = args[:free_space_bytes] if args.key?(:free_space_bytes) @total_space_bytes = args[:total_space_bytes] if args.key?(:total_space_bytes) end end # A generic empty message that you can re-use to avoid defining duplicated # empty messages in your APIs. A typical example is to use it as the request # or the response type of an API method. For instance: # service Foo ` # rpc Bar(google.protobuf.Empty) returns (google.protobuf.Empty); # ` # The JSON representation for `Empty` is empty JSON object ````. class Empty include Google::Apis::Core::Hashable def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) end end # Carries information about events that occur during pipeline execution. class Event include Google::Apis::Core::Hashable # A human-readable description of the event. Note that these strings can # change at any time without notice. Any application logic must use the # information in the `details` field. # Corresponds to the JSON property `description` # @return [String] attr_accessor :description # Machine-readable details about the event. # Corresponds to the JSON property `details` # @return [Hash] attr_accessor :details # The time at which the event occurred. # Corresponds to the JSON property `timestamp` # @return [String] attr_accessor :timestamp def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @description = args[:description] if args.key?(:description) @details = args[:details] if args.key?(:details) @timestamp = args[:timestamp] if args.key?(:timestamp) end end # An event generated when the execution of a pipeline has failed. Note # that other events can continue to occur after this event. class FailedEvent include Google::Apis::Core::Hashable # The human-readable description of the cause of the failure. # Corresponds to the JSON property `cause` # @return [String] attr_accessor :cause # The Google standard error code that best describes this failure. # Corresponds to the JSON property `code` # @return [String] attr_accessor :code def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @cause = args[:cause] if args.key?(:cause) @code = args[:code] if args.key?(:code) end end # Message that represents an arbitrary HTTP body. It should only be used for # payload formats that can't be represented as JSON, such as raw binary or # an HTML page. # This message can be used both in streaming and non-streaming API methods in # the request as well as the response. # It can be used as a top-level request field, which is convenient if one # wants to extract parameters from either the URL or HTTP template into the # request fields and also want access to the raw HTTP body. # Example: # message GetResourceRequest ` # // A unique request id. # string request_id = 1; # // The raw HTTP body is bound to this field. # google.api.HttpBody http_body = 2; # ` # service ResourceService ` # rpc GetResource(GetResourceRequest) returns (google.api.HttpBody); # rpc UpdateResource(google.api.HttpBody) returns # (google.protobuf.Empty); # ` # Example with streaming methods: # service CaldavService ` # rpc GetCalendar(stream google.api.HttpBody) # returns (stream google.api.HttpBody); # rpc UpdateCalendar(stream google.api.HttpBody) # returns (stream google.api.HttpBody); # ` # Use of this type only changes how the request and response bodies are # handled, all other features will continue to work unchanged. class HttpBody include Google::Apis::Core::Hashable # The HTTP Content-Type header value specifying the content type of the body. # Corresponds to the JSON property `contentType` # @return [String] attr_accessor :content_type # The HTTP request/response body as raw binary. # Corresponds to the JSON property `data` # NOTE: Values are automatically base64 encoded/decoded in the client library. # @return [String] attr_accessor :data # Application specific response metadata. Must be set in the first response # for streaming APIs. # Corresponds to the JSON property `extensions` # @return [Array>] attr_accessor :extensions def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @content_type = args[:content_type] if args.key?(:content_type) @data = args[:data] if args.key?(:data) @extensions = args[:extensions] if args.key?(:extensions) end end # The response message for Operations.ListOperations. class ListOperationsResponse include Google::Apis::Core::Hashable # The standard List next-page token. # Corresponds to the JSON property `nextPageToken` # @return [String] attr_accessor :next_page_token # A list of operations that matches the specified filter in the request. # Corresponds to the JSON property `operations` # @return [Array] attr_accessor :operations def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @next_page_token = args[:next_page_token] if args.key?(:next_page_token) @operations = args[:operations] if args.key?(:operations) end end # Carries information about the pipeline execution that is returned # in the long running operation's metadata field. class Metadata include Google::Apis::Core::Hashable # The time at which the operation was created by the API. # Corresponds to the JSON property `createTime` # @return [String] attr_accessor :create_time # The time at which execution was completed and resources were cleaned up. # Corresponds to the JSON property `endTime` # @return [String] attr_accessor :end_time # The list of events that have happened so far during the execution of this # operation. # Corresponds to the JSON property `events` # @return [Array] attr_accessor :events # The user-defined labels associated with this operation. # Corresponds to the JSON property `labels` # @return [Hash] attr_accessor :labels # Specifies a series of actions to execute, expressed as Docker containers. # Corresponds to the JSON property `pipeline` # @return [Google::Apis::GenomicsV2alpha1::Pipeline] attr_accessor :pipeline # The first time at which resources were allocated to execute the pipeline. # Corresponds to the JSON property `startTime` # @return [String] attr_accessor :start_time def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @create_time = args[:create_time] if args.key?(:create_time) @end_time = args[:end_time] if args.key?(:end_time) @events = args[:events] if args.key?(:events) @labels = args[:labels] if args.key?(:labels) @pipeline = args[:pipeline] if args.key?(:pipeline) @start_time = args[:start_time] if args.key?(:start_time) end end # Carries information about a particular disk mount inside a container. class Mount include Google::Apis::Core::Hashable # The name of the disk to mount, as specified in the resources section. # Corresponds to the JSON property `disk` # @return [String] attr_accessor :disk # The path to mount the disk inside the container. # Corresponds to the JSON property `path` # @return [String] attr_accessor :path # If true, the disk is mounted read-only inside the container. # Corresponds to the JSON property `readOnly` # @return [Boolean] attr_accessor :read_only alias_method :read_only?, :read_only def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @disk = args[:disk] if args.key?(:disk) @path = args[:path] if args.key?(:path) @read_only = args[:read_only] if args.key?(:read_only) end end # VM networking options. class Network include Google::Apis::Core::Hashable # The network name to attach the VM's network interface to. The value will # be prefixed with `global/networks/` unless it contains a `/`, in which # case it is assumed to be a fully specified network resource URL. # If unspecified, the global default network is used. # Corresponds to the JSON property `name` # @return [String] attr_accessor :name # If the specified network is configured for custom subnet creation, the # name of the subnetwork to attach the instance to must be specified here. # The value is prefixed with `regions/*/subnetworks/` unless it contains a # `/`, in which case it is assumed to be a fully specified subnetwork # resource URL. # If the `*` character appears in the value, it is replaced with the region # that the virtual machine has been allocated in. # Corresponds to the JSON property `subnetwork` # @return [String] attr_accessor :subnetwork # If set to true, do not attach a public IP address to the VM. Note that # without a public IP address, additional configuration is required to # allow the VM to access Google services. # See https://cloud.google.com/vpc/docs/configure-private-google-access # for more information. # Corresponds to the JSON property `usePrivateAddress` # @return [Boolean] attr_accessor :use_private_address alias_method :use_private_address?, :use_private_address def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @name = args[:name] if args.key?(:name) @subnetwork = args[:subnetwork] if args.key?(:subnetwork) @use_private_address = args[:use_private_address] if args.key?(:use_private_address) end end # This resource represents a long-running operation that is the result of a # network API call. class Operation include Google::Apis::Core::Hashable # If the value is `false`, it means the operation is still in progress. # If `true`, the operation is completed, and either `error` or `response` is # available. # Corresponds to the JSON property `done` # @return [Boolean] attr_accessor :done alias_method :done?, :done # The `Status` type defines a logical error model that is suitable for # different programming environments, including REST APIs and RPC APIs. It is # used by [gRPC](https://github.com/grpc). Each `Status` message contains # three pieces of data: error code, error message, and error details. # You can find out more about this error model and how to work with it in the # [API Design Guide](https://cloud.google.com/apis/design/errors). # Corresponds to the JSON property `error` # @return [Google::Apis::GenomicsV2alpha1::Status] attr_accessor :error # An OperationMetadata or Metadata object. This will always be returned with the # Operation. # Corresponds to the JSON property `metadata` # @return [Hash] attr_accessor :metadata # The server-assigned name, which is only unique within the same service that # originally returns it. For example: `operations/CJHU7Oi_ChDrveSpBRjfuL- # qzoWAgEw` # Corresponds to the JSON property `name` # @return [String] attr_accessor :name # An Empty object. # Corresponds to the JSON property `response` # @return [Hash] attr_accessor :response def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @done = args[:done] if args.key?(:done) @error = args[:error] if args.key?(:error) @metadata = args[:metadata] if args.key?(:metadata) @name = args[:name] if args.key?(:name) @response = args[:response] if args.key?(:response) end end # An event that occurred during an Operation. class OperationEvent include Google::Apis::Core::Hashable # Required description of event. # Corresponds to the JSON property `description` # @return [String] attr_accessor :description # Optional time of when event finished. An event can have a start time and no # finish time. If an event has a finish time, there must be a start time. # Corresponds to the JSON property `endTime` # @return [String] attr_accessor :end_time # Optional time of when event started. # Corresponds to the JSON property `startTime` # @return [String] attr_accessor :start_time def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @description = args[:description] if args.key?(:description) @end_time = args[:end_time] if args.key?(:end_time) @start_time = args[:start_time] if args.key?(:start_time) end end # Metadata describing an Operation. class OperationMetadata include Google::Apis::Core::Hashable # This field is deprecated. Use `labels` instead. Optionally provided by the # caller when submitting the request that creates the operation. # Corresponds to the JSON property `clientId` # @return [String] attr_accessor :client_id # The time at which the job was submitted to the Genomics service. # Corresponds to the JSON property `createTime` # @return [String] attr_accessor :create_time # The time at which the job stopped running. # Corresponds to the JSON property `endTime` # @return [String] attr_accessor :end_time # Optional event messages that were generated during the job's execution. # This also contains any warnings that were generated during import # or export. # Corresponds to the JSON property `events` # @return [Array] attr_accessor :events # Optionally provided by the caller when submitting the request that creates # the operation. # Corresponds to the JSON property `labels` # @return [Hash] attr_accessor :labels # The Google Cloud Project in which the job is scoped. # Corresponds to the JSON property `projectId` # @return [String] attr_accessor :project_id # The original request that started the operation. Note that this will be in # current version of the API. If the operation was started with v1beta2 API # and a GetOperation is performed on v1 API, a v1 request will be returned. # Corresponds to the JSON property `request` # @return [Hash] attr_accessor :request # Runtime metadata on this Operation. # Corresponds to the JSON property `runtimeMetadata` # @return [Hash] attr_accessor :runtime_metadata # The time at which the job began to run. # Corresponds to the JSON property `startTime` # @return [String] attr_accessor :start_time def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @client_id = args[:client_id] if args.key?(:client_id) @create_time = args[:create_time] if args.key?(:create_time) @end_time = args[:end_time] if args.key?(:end_time) @events = args[:events] if args.key?(:events) @labels = args[:labels] if args.key?(:labels) @project_id = args[:project_id] if args.key?(:project_id) @request = args[:request] if args.key?(:request) @runtime_metadata = args[:runtime_metadata] if args.key?(:runtime_metadata) @start_time = args[:start_time] if args.key?(:start_time) end end # Specifies a series of actions to execute, expressed as Docker containers. class Pipeline include Google::Apis::Core::Hashable # The list of actions to execute, in the order they are specified. # Corresponds to the JSON property `actions` # @return [Array] attr_accessor :actions # The environment to pass into every action. Each action can also specify # additional environment variables but cannot delete an entry from this map # (though they can overwrite it with a different value). # Corresponds to the JSON property `environment` # @return [Hash] attr_accessor :environment # The system resources for the pipeline run. # At least one zone or region must be specified or the pipeline run will fail. # Corresponds to the JSON property `resources` # @return [Google::Apis::GenomicsV2alpha1::Resources] attr_accessor :resources # The maximum amount of time to give the pipeline to complete. This includes # the time spent waiting for a worker to be allocated. If the pipeline fails # to complete before the timeout, it will be cancelled and the error code # will be set to DEADLINE_EXCEEDED. # If unspecified, it will default to 7 days. # Corresponds to the JSON property `timeout` # @return [String] attr_accessor :timeout def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @actions = args[:actions] if args.key?(:actions) @environment = args[:environment] if args.key?(:environment) @resources = args[:resources] if args.key?(:resources) @timeout = args[:timeout] if args.key?(:timeout) end end # An event generated when the worker starts pulling an image. class PullStartedEvent include Google::Apis::Core::Hashable # The URI of the image that was pulled. # Corresponds to the JSON property `imageUri` # @return [String] attr_accessor :image_uri def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @image_uri = args[:image_uri] if args.key?(:image_uri) end end # An event generated when the worker stops pulling an image. class PullStoppedEvent include Google::Apis::Core::Hashable # The URI of the image that was pulled. # Corresponds to the JSON property `imageUri` # @return [String] attr_accessor :image_uri def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @image_uri = args[:image_uri] if args.key?(:image_uri) end end # The system resources for the pipeline run. # At least one zone or region must be specified or the pipeline run will fail. class Resources include Google::Apis::Core::Hashable # The project ID to allocate resources in. # Corresponds to the JSON property `projectId` # @return [String] attr_accessor :project_id # The list of regions allowed for VM allocation. If set, the `zones` field # must not be set. # Corresponds to the JSON property `regions` # @return [Array] attr_accessor :regions # Carries information about a Compute Engine VM resource. # Corresponds to the JSON property `virtualMachine` # @return [Google::Apis::GenomicsV2alpha1::VirtualMachine] attr_accessor :virtual_machine # The list of zones allowed for VM allocation. If set, the `regions` field # must not be set. # Corresponds to the JSON property `zones` # @return [Array] attr_accessor :zones def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @project_id = args[:project_id] if args.key?(:project_id) @regions = args[:regions] if args.key?(:regions) @virtual_machine = args[:virtual_machine] if args.key?(:virtual_machine) @zones = args[:zones] if args.key?(:zones) end end # The arguments to the `RunPipeline` method. The requesting user must have # the `iam.serviceAccounts.actAs` permission for the Cloud Genomics service # account or the request will fail. class RunPipelineRequest include Google::Apis::Core::Hashable # User-defined labels to associate with the returned operation. These # labels are not propagated to any Google Cloud Platform resources used by # the operation, and can be modified at any time. # To associate labels with resources created while executing the operation, # see the appropriate resource message (for example, `VirtualMachine`). # Corresponds to the JSON property `labels` # @return [Hash] attr_accessor :labels # Specifies a series of actions to execute, expressed as Docker containers. # Corresponds to the JSON property `pipeline` # @return [Google::Apis::GenomicsV2alpha1::Pipeline] attr_accessor :pipeline def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @labels = args[:labels] if args.key?(:labels) @pipeline = args[:pipeline] if args.key?(:pipeline) end end # The response to the RunPipeline method, returned in the operation's result # field on success. class RunPipelineResponse include Google::Apis::Core::Hashable def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) end end # Runtime metadata that will be populated in the # runtimeMetadata # field of the Operation associated with a RunPipeline execution. class RuntimeMetadata include Google::Apis::Core::Hashable # Describes a Compute Engine resource that is being managed by a running # pipeline. # Corresponds to the JSON property `computeEngine` # @return [Google::Apis::GenomicsV2alpha1::ComputeEngine] attr_accessor :compute_engine def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @compute_engine = args[:compute_engine] if args.key?(:compute_engine) end end # Holds encrypted information that is only decrypted and stored in RAM # by the worker VM when running the pipeline. class Secret include Google::Apis::Core::Hashable # The value of the cipherText response from the `encrypt` method. This field # is intentionally unaudited. # Corresponds to the JSON property `cipherText` # @return [String] attr_accessor :cipher_text # The name of the Cloud KMS key that will be used to decrypt the secret # value. The VM service account must have the required permissions and # authentication scopes to invoke the `decrypt` method on the specified key. # Corresponds to the JSON property `keyName` # @return [String] attr_accessor :key_name def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @cipher_text = args[:cipher_text] if args.key?(:cipher_text) @key_name = args[:key_name] if args.key?(:key_name) end end # Carries information about a Google Cloud service account. class ServiceAccount include Google::Apis::Core::Hashable # Email address of the service account. If not specified, the default # Compute Engine service account for the project will be used. # Corresponds to the JSON property `email` # @return [String] attr_accessor :email # List of scopes to be enabled for this service account on the VM, in # addition to the cloud-platform API scope that will be added by default. # Corresponds to the JSON property `scopes` # @return [Array] attr_accessor :scopes def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @email = args[:email] if args.key?(:email) @scopes = args[:scopes] if args.key?(:scopes) end end # The `Status` type defines a logical error model that is suitable for # different programming environments, including REST APIs and RPC APIs. It is # used by [gRPC](https://github.com/grpc). Each `Status` message contains # three pieces of data: error code, error message, and error details. # You can find out more about this error model and how to work with it in the # [API Design Guide](https://cloud.google.com/apis/design/errors). class Status include Google::Apis::Core::Hashable # The status code, which should be an enum value of google.rpc.Code. # Corresponds to the JSON property `code` # @return [Fixnum] attr_accessor :code # A list of messages that carry the error details. There is a common set of # message types for APIs to use. # Corresponds to the JSON property `details` # @return [Array>] attr_accessor :details # A developer-facing error message, which should be in English. Any # user-facing error message should be localized and sent in the # google.rpc.Status.details field, or localized by the client. # Corresponds to the JSON property `message` # @return [String] attr_accessor :message def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @code = args[:code] if args.key?(:code) @details = args[:details] if args.key?(:details) @message = args[:message] if args.key?(:message) end end # An event that occured in the operation assigned to the # worker and the time of occurance. class TimestampedEvent include Google::Apis::Core::Hashable # The event data. # Corresponds to the JSON property `data` # @return [Hash] attr_accessor :data # The time when the event happened. # Corresponds to the JSON property `timestamp` # @return [String] attr_accessor :timestamp def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @data = args[:data] if args.key?(:data) @timestamp = args[:timestamp] if args.key?(:timestamp) end end # An event generated when the execution of a container results in a # non-zero exit status that was not otherwise ignored. Execution will # continue, but only actions that are flagged as `ALWAYS_RUN` will be # executed. Other actions will be skipped. class UnexpectedExitStatusEvent include Google::Apis::Core::Hashable # The numeric ID of the action that started the container. # Corresponds to the JSON property `actionId` # @return [Fixnum] attr_accessor :action_id # The exit status of the container. # Corresponds to the JSON property `exitStatus` # @return [Fixnum] attr_accessor :exit_status def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @action_id = args[:action_id] if args.key?(:action_id) @exit_status = args[:exit_status] if args.key?(:exit_status) end end # The response to the UploadSOSReport method. class UploadSosReportResponse include Google::Apis::Core::Hashable def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) end end # Carries information about a Compute Engine VM resource. class VirtualMachine include Google::Apis::Core::Hashable # The list of accelerators to attach to the VM. # Corresponds to the JSON property `accelerators` # @return [Array] attr_accessor :accelerators # The size of the boot disk, in GB. The boot disk must be large # enough to accommodate all of the Docker images from each action in the # pipeline at the same time. If not specified, a small but reasonable # default value is used. # Corresponds to the JSON property `bootDiskSizeGb` # @return [Fixnum] attr_accessor :boot_disk_size_gb # The host operating system image to use. # Currently, only Container-Optimized OS images can be used. # The default value is `projects/cos-cloud/global/images/family/cos-stable`, # which selects the latest stable release of Container-Optimized OS. # This option is provided to allow testing against the beta release of the # operating system to ensure that the new version does not interact # negatively with production pipelines. # To test a pipeline against the beta release of Container-Optimized OS, # use the value `projects/cos-cloud/global/images/family/cos-beta`. # Corresponds to the JSON property `bootImage` # @return [String] attr_accessor :boot_image # The CPU platform to request. An instance based on a newer platform can be # allocated, but never one with fewer capabilities. The value of this # parameter must be a valid Compute Engine CPU platform name (such as "Intel # Skylake"). This parameter is only useful for carefully optimized work # loads where the CPU platform has a significant impact. # For more information about the effect of this parameter, see # https://cloud.google.com/compute/docs/instances/specify-min-cpu-platform. # Corresponds to the JSON property `cpuPlatform` # @return [String] attr_accessor :cpu_platform # The list of disks to create and attach to the VM. # Corresponds to the JSON property `disks` # @return [Array] attr_accessor :disks # The Compute Engine Disk Images to use as a Docker cache. The disks will be # mounted into the Docker folder in a way that the images present in the # cache will not need to be pulled. The digests of the cached images must # match those of the tags used or the latest version will still be pulled. # Only a single image is supported. # Corresponds to the JSON property `dockerCacheImages` # @return [Array] attr_accessor :docker_cache_images # Whether Stackdriver monitoring should be enabled on the VM. # Corresponds to the JSON property `enableStackdriverMonitoring` # @return [Boolean] attr_accessor :enable_stackdriver_monitoring alias_method :enable_stackdriver_monitoring?, :enable_stackdriver_monitoring # Optional set of labels to apply to the VM and any attached disk resources. # These labels must adhere to the [name and value # restrictions](https://cloud.google.com/compute/docs/labeling-resources) on # VM labels imposed by Compute Engine. # Labels keys with the prefix 'google-' are reserved for use by Google. # Labels applied at creation time to the VM. Applied on a best-effort basis # to attached disk resources shortly after VM creation. # Corresponds to the JSON property `labels` # @return [Hash] attr_accessor :labels # Required. The machine type of the virtual machine to create. Must be the short # name # of a standard machine type (such as "n1-standard-1") or a custom machine # type (such as "custom-1-4096", where "1" indicates the number of vCPUs and # "4096" indicates the memory in MB). See # [Creating an instance with a custom machine # type](https://cloud.google.com/compute/docs/instances/creating-instance-with- # custom-machine-type#create) # for more specifications on creating a custom machine type. # Corresponds to the JSON property `machineType` # @return [String] attr_accessor :machine_type # VM networking options. # Corresponds to the JSON property `network` # @return [Google::Apis::GenomicsV2alpha1::Network] attr_accessor :network # The NVIDIA driver version to use when attaching an NVIDIA GPU accelerator. # The version specified here must be compatible with the GPU libraries # contained in the container being executed, and must be one of the drivers # hosted in the `nvidia-drivers-us-public` bucket on Google Cloud Storage. # Corresponds to the JSON property `nvidiaDriverVersion` # @return [String] attr_accessor :nvidia_driver_version # If true, allocate a preemptible VM. # Corresponds to the JSON property `preemptible` # @return [Boolean] attr_accessor :preemptible alias_method :preemptible?, :preemptible # Carries information about a Google Cloud service account. # Corresponds to the JSON property `serviceAccount` # @return [Google::Apis::GenomicsV2alpha1::ServiceAccount] attr_accessor :service_account def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @accelerators = args[:accelerators] if args.key?(:accelerators) @boot_disk_size_gb = args[:boot_disk_size_gb] if args.key?(:boot_disk_size_gb) @boot_image = args[:boot_image] if args.key?(:boot_image) @cpu_platform = args[:cpu_platform] if args.key?(:cpu_platform) @disks = args[:disks] if args.key?(:disks) @docker_cache_images = args[:docker_cache_images] if args.key?(:docker_cache_images) @enable_stackdriver_monitoring = args[:enable_stackdriver_monitoring] if args.key?(:enable_stackdriver_monitoring) @labels = args[:labels] if args.key?(:labels) @machine_type = args[:machine_type] if args.key?(:machine_type) @network = args[:network] if args.key?(:network) @nvidia_driver_version = args[:nvidia_driver_version] if args.key?(:nvidia_driver_version) @preemptible = args[:preemptible] if args.key?(:preemptible) @service_account = args[:service_account] if args.key?(:service_account) end end # An event generated after a worker VM has been assigned to run the # pipeline. class WorkerAssignedEvent include Google::Apis::Core::Hashable # The worker's instance name. # Corresponds to the JSON property `instance` # @return [String] attr_accessor :instance # The machine type that was assigned for the worker. # Corresponds to the JSON property `machineType` # @return [String] attr_accessor :machine_type # The zone the worker is running in. # Corresponds to the JSON property `zone` # @return [String] attr_accessor :zone def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @instance = args[:instance] if args.key?(:instance) @machine_type = args[:machine_type] if args.key?(:machine_type) @zone = args[:zone] if args.key?(:zone) end end # An event generated when the worker VM that was assigned to the pipeline # has been released (deleted). class WorkerReleasedEvent include Google::Apis::Core::Hashable # The worker's instance name. # Corresponds to the JSON property `instance` # @return [String] attr_accessor :instance # The zone the worker was running in. # Corresponds to the JSON property `zone` # @return [String] attr_accessor :zone def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @instance = args[:instance] if args.key?(:instance) @zone = args[:zone] if args.key?(:zone) end end # The status of the worker VM. class WorkerStatus include Google::Apis::Core::Hashable # Status of attached disks. # Corresponds to the JSON property `attachedDisks` # @return [Hash] attr_accessor :attached_disks # The status of a disk on a VM. # Corresponds to the JSON property `bootDisk` # @return [Google::Apis::GenomicsV2alpha1::DiskStatus] attr_accessor :boot_disk # Free RAM. # Corresponds to the JSON property `freeRamBytes` # @return [Fixnum] attr_accessor :free_ram_bytes # Total RAM. # Corresponds to the JSON property `totalRamBytes` # @return [Fixnum] attr_accessor :total_ram_bytes # System uptime. # Corresponds to the JSON property `uptimeSeconds` # @return [Fixnum] attr_accessor :uptime_seconds def initialize(**args) update!(**args) end # Update properties of this object def update!(**args) @attached_disks = args[:attached_disks] if args.key?(:attached_disks) @boot_disk = args[:boot_disk] if args.key?(:boot_disk) @free_ram_bytes = args[:free_ram_bytes] if args.key?(:free_ram_bytes) @total_ram_bytes = args[:total_ram_bytes] if args.key?(:total_ram_bytes) @uptime_seconds = args[:uptime_seconds] if args.key?(:uptime_seconds) end end end end end