chiu
/
google-api-ruby-client
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
google-api-ruby-client/generated/google/apis/monitoring_v3/classes.rb

4180 lines
191 KiB
Ruby
Raw Blame History

# Copyright 2015 Google Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
require 'date'
require 'google/apis/core/base_service'
require 'google/apis/core/json_representation'
require 'google/apis/core/hashable'
require 'google/apis/errors'
module Google
module Apis
module MonitoringV3
# Describes how to combine multiple time series to provide a different view of
# the data. Aggregation of time series is done in two steps. First, each time
# series in the set is aligned to the same time interval boundaries, then the
# set of time series is optionally reduced in number.Alignment consists of
# applying the per_series_aligner operation to each time series after its data
# has been divided into regular alignment_period time intervals. This process
# takes all of the data points in an alignment period, applies a mathematical
# transformation such as averaging, minimum, maximum, delta, etc., and converts
# them into a single data point per period.Reduction is when the aligned and
# transformed time series can optionally be combined, reducing the number of
# time series through similar mathematical transformations. Reduction involves
# applying a cross_series_reducer to all the time series, optionally sorting the
# time series into subsets with group_by_fields, and applying the reducer to
# each subset.The raw time series data can contain a huge amount of information
# from multiple sources. Alignment and reduction transforms this mass of data
# into a more manageable and representative collection of data, for example "the
# 95% latency across the average of all tasks in a cluster". This representative
# data can be more easily graphed and comprehended, and the individual time
# series data is still available for later drilldown. For more details, see
# Filtering and aggregation (https://cloud.google.com/monitoring/api/v3/
# aggregation).
class Aggregation
include Google::Apis::Core::Hashable
# The alignment_period specifies a time interval, in seconds, that is used to
# divide the data in all the time series into consistent blocks of time. This
# will be done before the per-series aligner can be applied to the data.The
# value must be at least 60 seconds. If a per-series aligner other than
# ALIGN_NONE is specified, this field is required or an error is returned. If no
# per-series aligner is specified, or the aligner ALIGN_NONE is specified, then
# this field is ignored.The maximum value of the alignment_period is 104 weeks (
# 2 years) for charts, and 90,000 seconds (25 hours) for alerting policies.
# Corresponds to the JSON property `alignmentPeriod`
# @return [String]
attr_accessor :alignment_period
# The reduction operation to be used to combine time series into a single time
# series, where the value of each data point in the resulting series is a
# function of all the already aligned values in the input time series.Not all
# reducer operations can be applied to all time series. The valid choices depend
# on the metric_kind and the value_type of the original time series. Reduction
# can yield a time series with a different metric_kind or value_type than the
# input time series.Time series data must first be aligned (see
# per_series_aligner) in order to perform cross-time series reduction. If
# cross_series_reducer is specified, then per_series_aligner must be specified,
# and must not be ALIGN_NONE. An alignment_period must also be specified;
# otherwise, an error is returned.
# Corresponds to the JSON property `crossSeriesReducer`
# @return [String]
attr_accessor :cross_series_reducer
# The set of fields to preserve when cross_series_reducer is specified. The
# group_by_fields determine how the time series are partitioned into subsets
# prior to applying the aggregation operation. Each subset contains time series
# that have the same value for each of the grouping fields. Each individual time
# series is a member of exactly one subset. The cross_series_reducer is applied
# to each subset of time series. It is not possible to reduce across different
# resource types, so this field implicitly contains resource.type. Fields not
# specified in group_by_fields are aggregated away. If group_by_fields is not
# specified and all the time series have the same resource type, then the time
# series are aggregated into a single output time series. If
# cross_series_reducer is not defined, this field is ignored.
# Corresponds to the JSON property `groupByFields`
# @return [Array<String>]
attr_accessor :group_by_fields
# An Aligner describes how to bring the data points in a single time series into
# temporal alignment. Except for ALIGN_NONE, all alignments cause all the data
# points in an alignment_period to be mathematically grouped together, resulting
# in a single data point for each alignment_period with end timestamp at the end
# of the period.Not all alignment operations may be applied to all time series.
# The valid choices depend on the metric_kind and value_type of the original
# time series. Alignment can change the metric_kind or the value_type of the
# time series.Time series data must be aligned in order to perform cross-time
# series reduction. If cross_series_reducer is specified, then
# per_series_aligner must be specified and not equal to ALIGN_NONE and
# alignment_period must be specified; otherwise, an error is returned.
# Corresponds to the JSON property `perSeriesAligner`
# @return [String]
attr_accessor :per_series_aligner
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@alignment_period = args[:alignment_period] if args.key?(:alignment_period)
@cross_series_reducer = args[:cross_series_reducer] if args.key?(:cross_series_reducer)
@group_by_fields = args[:group_by_fields] if args.key?(:group_by_fields)
@per_series_aligner = args[:per_series_aligner] if args.key?(:per_series_aligner)
end
end
# A description of the conditions under which some aspect of your system is
# considered to be "unhealthy" and the ways to notify people or services about
# this state. For an overview of alert policies, see Introduction to Alerting (
# https://cloud.google.com/monitoring/alerts/).
class AlertPolicy
include Google::Apis::Core::Hashable
# How to combine the results of multiple conditions to determine if an incident
# should be opened. If condition_time_series_query_language is present, this
# must be COMBINE_UNSPECIFIED.
# Corresponds to the JSON property `combiner`
# @return [String]
attr_accessor :combiner
# A list of conditions for the policy. The conditions are combined by AND or OR
# according to the combiner field. If the combined conditions evaluate to true,
# then an incident is created. A policy can have from one to six conditions. If
# condition_time_series_query_language is present, it must be the only condition.
# Corresponds to the JSON property `conditions`
# @return [Array<Google::Apis::MonitoringV3::Condition>]
attr_accessor :conditions
# Describes a change made to a configuration.
# Corresponds to the JSON property `creationRecord`
# @return [Google::Apis::MonitoringV3::MutationRecord]
attr_accessor :creation_record
# A short name or phrase used to identify the policy in dashboards,
# notifications, and incidents. To avoid confusion, don't use the same display
# name for multiple policies in the same project. The name is limited to 512
# Unicode characters.
# Corresponds to the JSON property `displayName`
# @return [String]
attr_accessor :display_name
# A content string and a MIME type that describes the content string's format.
# Corresponds to the JSON property `documentation`
# @return [Google::Apis::MonitoringV3::Documentation]
attr_accessor :documentation
# Whether or not the policy is enabled. On write, the default interpretation if
# unset is that the policy is enabled. On read, clients should not make any
# assumption about the state if it has not been populated. The field should
# always be populated on List and Get operations, unless a field projection has
# been specified that strips it out.
# Corresponds to the JSON property `enabled`
# @return [Boolean]
attr_accessor :enabled
alias_method :enabled?, :enabled
# Describes a change made to a configuration.
# Corresponds to the JSON property `mutationRecord`
# @return [Google::Apis::MonitoringV3::MutationRecord]
attr_accessor :mutation_record
# Required if the policy exists. The resource name for this policy. The format
# is: projects/[PROJECT_ID_OR_NUMBER]/alertPolicies/[ALERT_POLICY_ID] [
# ALERT_POLICY_ID] is assigned by Stackdriver Monitoring when the policy is
# created. When calling the alertPolicies.create method, do not include the name
# field in the alerting policy passed as part of the request.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# Identifies the notification channels to which notifications should be sent
# when incidents are opened or closed or when new violations occur on an already
# opened incident. Each element of this array corresponds to the name field in
# each of the NotificationChannel objects that are returned from the
# ListNotificationChannels method. The format of the entries in this field is:
# projects/[PROJECT_ID_OR_NUMBER]/notificationChannels/[CHANNEL_ID]
# Corresponds to the JSON property `notificationChannels`
# @return [Array<String>]
attr_accessor :notification_channels
# User-supplied key/value data to be used for organizing and identifying the
# AlertPolicy objects.The field can contain up to 64 entries. Each key and value
# is limited to 63 Unicode characters or 128 bytes, whichever is smaller. Labels
# and values can contain only lowercase letters, numerals, underscores, and
# dashes. Keys must begin with a letter.
# Corresponds to the JSON property `userLabels`
# @return [Hash<String,String>]
attr_accessor :user_labels
# The Status type defines a logical error model that is suitable for different
# programming environments, including REST APIs and RPC APIs. It is used by gRPC
# (https://github.com/grpc). Each Status message contains three pieces of data:
# error code, error message, and error details.You can find out more about this
# error model and how to work with it in the API Design Guide (https://cloud.
# google.com/apis/design/errors).
# Corresponds to the JSON property `validity`
# @return [Google::Apis::MonitoringV3::Status]
attr_accessor :validity
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@combiner = args[:combiner] if args.key?(:combiner)
@conditions = args[:conditions] if args.key?(:conditions)
@creation_record = args[:creation_record] if args.key?(:creation_record)
@display_name = args[:display_name] if args.key?(:display_name)
@documentation = args[:documentation] if args.key?(:documentation)
@enabled = args[:enabled] if args.key?(:enabled)
@mutation_record = args[:mutation_record] if args.key?(:mutation_record)
@name = args[:name] if args.key?(:name)
@notification_channels = args[:notification_channels] if args.key?(:notification_channels)
@user_labels = args[:user_labels] if args.key?(:user_labels)
@validity = args[:validity] if args.key?(:validity)
end
end
# App Engine service. Learn more at https://cloud.google.com/appengine.
class AppEngine
include Google::Apis::Core::Hashable
# The ID of the App Engine module underlying this service. Corresponds to the
# module_id resource label in the gae_app monitored resource: https://cloud.
# google.com/monitoring/api/resources#tag_gae_app
# Corresponds to the JSON property `moduleId`
# @return [String]
attr_accessor :module_id
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@module_id = args[:module_id] if args.key?(:module_id)
end
end
# Future parameters for the availability SLI.
class AvailabilityCriteria
include Google::Apis::Core::Hashable
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
end
end
# The authentication parameters to provide to the specified resource or URL that
# requires a username and password. Currently, only Basic HTTP authentication (
# https://tools.ietf.org/html/rfc7617) is supported in Uptime checks.
class BasicAuthentication
include Google::Apis::Core::Hashable
# The password to use when authenticating with the HTTP server.
# Corresponds to the JSON property `password`
# @return [String]
attr_accessor :password
# The username to use when authenticating with the HTTP server.
# Corresponds to the JSON property `username`
# @return [String]
attr_accessor :username
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@password = args[:password] if args.key?(:password)
@username = args[:username] if args.key?(:username)
end
end
# An SLI measuring performance on a well-known service type. Performance will be
# computed on the basis of pre-defined metrics. The type of the service_resource
# determines the metrics to use and the service_resource.labels and
# metric_labels are used to construct a monitoring filter to filter that metric
# down to just the data relevant to this service.
class BasicSli
include Google::Apis::Core::Hashable
# Future parameters for the availability SLI.
# Corresponds to the JSON property `availability`
# @return [Google::Apis::MonitoringV3::AvailabilityCriteria]
attr_accessor :availability
# Parameters for a latency threshold SLI.
# Corresponds to the JSON property `latency`
# @return [Google::Apis::MonitoringV3::LatencyCriteria]
attr_accessor :latency
# OPTIONAL: The set of locations to which this SLI is relevant. Telemetry from
# other locations will not be used to calculate performance for this SLI. If
# omitted, this SLI applies to all locations in which the Service has activity.
# For service types that don't support breaking down by location, setting this
# field will result in an error.
# Corresponds to the JSON property `location`
# @return [Array<String>]
attr_accessor :location
# OPTIONAL: The set of RPCs to which this SLI is relevant. Telemetry from other
# methods will not be used to calculate performance for this SLI. If omitted,
# this SLI applies to all the Service's methods. For service types that don't
# support breaking down by method, setting this field will result in an error.
# Corresponds to the JSON property `method`
# @return [Array<String>]
attr_accessor :method_prop
# OPTIONAL: The set of API versions to which this SLI is relevant. Telemetry
# from other API versions will not be used to calculate performance for this SLI.
# If omitted, this SLI applies to all API versions. For service types that don'
# t support breaking down by version, setting this field will result in an error.
# Corresponds to the JSON property `version`
# @return [Array<String>]
attr_accessor :version
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@availability = args[:availability] if args.key?(:availability)
@latency = args[:latency] if args.key?(:latency)
@location = args[:location] if args.key?(:location)
@method_prop = args[:method_prop] if args.key?(:method_prop)
@version = args[:version] if args.key?(:version)
end
end
# BucketOptions describes the bucket boundaries used to create a histogram for
# the distribution. The buckets can be in a linear sequence, an exponential
# sequence, or each bucket can be specified explicitly. BucketOptions does not
# include the number of values in each bucket.A bucket has an inclusive lower
# bound and exclusive upper bound for the values that are counted for that
# bucket. The upper bound of a bucket must be strictly greater than the lower
# bound. The sequence of N buckets for a distribution consists of an underflow
# bucket (number 0), zero or more finite buckets (number 1 through N - 2) and an
# overflow bucket (number N - 1). The buckets are contiguous: the lower bound of
# bucket i (i > 0) is the same as the upper bound of bucket i - 1. The buckets
# span the whole range of finite values: lower bound of the underflow bucket is -
# infinity and the upper bound of the overflow bucket is +infinity. The finite
# buckets are so-called because both bounds are finite.
class BucketOptions
include Google::Apis::Core::Hashable
# Specifies a set of buckets with arbitrary widths.There are size(bounds) + 1 (=
# N) buckets. Bucket i has the following boundaries:Upper bound (0 <= i < N-1):
# boundsi Lower bound (1 <= i < N); boundsi - 1The bounds field must contain at
# least one element. If bounds has only one element, then there are no finite
# buckets, and that single element is the common boundary of the overflow and
# underflow buckets.
# Corresponds to the JSON property `explicitBuckets`
# @return [Google::Apis::MonitoringV3::Explicit]
attr_accessor :explicit_buckets
# Specifies an exponential sequence of buckets that have a width that is
# proportional to the value of the lower bound. Each bucket represents a
# constant relative uncertainty on a specific value in the bucket.There are
# num_finite_buckets + 2 (= N) buckets. Bucket i has the following boundaries:
# Upper bound (0 <= i < N-1): scale * (growth_factor ^ i). Lower bound (1 <= i <
# N): scale * (growth_factor ^ (i - 1)).
# Corresponds to the JSON property `exponentialBuckets`
# @return [Google::Apis::MonitoringV3::Exponential]
attr_accessor :exponential_buckets
# Specifies a linear sequence of buckets that all have the same width (except
# overflow and underflow). Each bucket represents a constant absolute
# uncertainty on the specific value in the bucket.There are num_finite_buckets +
# 2 (= N) buckets. Bucket i has the following boundaries:Upper bound (0 <= i < N-
# 1): offset + (width * i). Lower bound (1 <= i < N): offset + (width * (i - 1)).
# Corresponds to the JSON property `linearBuckets`
# @return [Google::Apis::MonitoringV3::Linear]
attr_accessor :linear_buckets
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@explicit_buckets = args[:explicit_buckets] if args.key?(:explicit_buckets)
@exponential_buckets = args[:exponential_buckets] if args.key?(:exponential_buckets)
@linear_buckets = args[:linear_buckets] if args.key?(:linear_buckets)
end
end
# Cloud Endpoints service. Learn more at https://cloud.google.com/endpoints.
class CloudEndpoints
include Google::Apis::Core::Hashable
# The name of the Cloud Endpoints service underlying this service. Corresponds
# to the service resource label in the api monitored resource: https://cloud.
# google.com/monitoring/api/resources#tag_api
# Corresponds to the JSON property `service`
# @return [String]
attr_accessor :service
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@service = args[:service] if args.key?(:service)
end
end
# Istio service scoped to a single Kubernetes cluster. Learn more at http://
# istio.io. Clusters running OSS Istio will have their services ingested as this
# type.
class ClusterIstio
include Google::Apis::Core::Hashable
# The name of the Kubernetes cluster in which this Istio service is defined.
# Corresponds to the cluster_name resource label in k8s_cluster resources.
# Corresponds to the JSON property `clusterName`
# @return [String]
attr_accessor :cluster_name
# The location of the Kubernetes cluster in which this Istio service is defined.
# Corresponds to the location resource label in k8s_cluster resources.
# Corresponds to the JSON property `location`
# @return [String]
attr_accessor :location
# The name of the Istio service underlying this service. Corresponds to the
# destination_service_name metric label in Istio metrics.
# Corresponds to the JSON property `serviceName`
# @return [String]
attr_accessor :service_name
# The namespace of the Istio service underlying this service. Corresponds to the
# destination_service_namespace metric label in Istio metrics.
# Corresponds to the JSON property `serviceNamespace`
# @return [String]
attr_accessor :service_namespace
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@cluster_name = args[:cluster_name] if args.key?(:cluster_name)
@location = args[:location] if args.key?(:location)
@service_name = args[:service_name] if args.key?(:service_name)
@service_namespace = args[:service_namespace] if args.key?(:service_namespace)
end
end
# A collection of data points sent from a collectd-based plugin. See the
# collectd documentation for more information.
class CollectdPayload
include Google::Apis::Core::Hashable
# The end time of the interval.
# Corresponds to the JSON property `endTime`
# @return [String]
attr_accessor :end_time
# The measurement metadata. Example: "process_id" -> 12345
# Corresponds to the JSON property `metadata`
# @return [Hash<String,Google::Apis::MonitoringV3::TypedValue>]
attr_accessor :metadata
# The name of the plugin. Example: "disk".
# Corresponds to the JSON property `plugin`
# @return [String]
attr_accessor :plugin
# The instance name of the plugin Example: "hdcl".
# Corresponds to the JSON property `pluginInstance`
# @return [String]
attr_accessor :plugin_instance
# The start time of the interval.
# Corresponds to the JSON property `startTime`
# @return [String]
attr_accessor :start_time
# The measurement type. Example: "memory".
# Corresponds to the JSON property `type`
# @return [String]
attr_accessor :type
# The measurement type instance. Example: "used".
# Corresponds to the JSON property `typeInstance`
# @return [String]
attr_accessor :type_instance
# The measured values during this time interval. Each value must have a
# different data_source_name.
# Corresponds to the JSON property `values`
# @return [Array<Google::Apis::MonitoringV3::CollectdValue>]
attr_accessor :values
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@end_time = args[:end_time] if args.key?(:end_time)
@metadata = args[:metadata] if args.key?(:metadata)
@plugin = args[:plugin] if args.key?(:plugin)
@plugin_instance = args[:plugin_instance] if args.key?(:plugin_instance)
@start_time = args[:start_time] if args.key?(:start_time)
@type = args[:type] if args.key?(:type)
@type_instance = args[:type_instance] if args.key?(:type_instance)
@values = args[:values] if args.key?(:values)
end
end
# Describes the error status for payloads that were not written.
class CollectdPayloadError
include Google::Apis::Core::Hashable
# The Status type defines a logical error model that is suitable for different
# programming environments, including REST APIs and RPC APIs. It is used by gRPC
# (https://github.com/grpc). Each Status message contains three pieces of data:
# error code, error message, and error details.You can find out more about this
# error model and how to work with it in the API Design Guide (https://cloud.
# google.com/apis/design/errors).
# Corresponds to the JSON property `error`
# @return [Google::Apis::MonitoringV3::Status]
attr_accessor :error
# The zero-based index in CreateCollectdTimeSeriesRequest.collectd_payloads.
# Corresponds to the JSON property `index`
# @return [Fixnum]
attr_accessor :index
# Records the error status for values that were not written due to an error.
# Failed payloads for which nothing is written will not include partial value
# errors.
# Corresponds to the JSON property `valueErrors`
# @return [Array<Google::Apis::MonitoringV3::CollectdValueError>]
attr_accessor :value_errors
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@error = args[:error] if args.key?(:error)
@index = args[:index] if args.key?(:index)
@value_errors = args[:value_errors] if args.key?(:value_errors)
end
end
# A single data point from a collectd-based plugin.
class CollectdValue
include Google::Apis::Core::Hashable
# The data source for the collectd value. For example, there are two data
# sources for network measurements: "rx" and "tx".
# Corresponds to the JSON property `dataSourceName`
# @return [String]
attr_accessor :data_source_name
# The type of measurement.
# Corresponds to the JSON property `dataSourceType`
# @return [String]
attr_accessor :data_source_type
# A single strongly-typed value.
# Corresponds to the JSON property `value`
# @return [Google::Apis::MonitoringV3::TypedValue]
attr_accessor :value
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data_source_name = args[:data_source_name] if args.key?(:data_source_name)
@data_source_type = args[:data_source_type] if args.key?(:data_source_type)
@value = args[:value] if args.key?(:value)
end
end
# Describes the error status for values that were not written.
class CollectdValueError
include Google::Apis::Core::Hashable
# The Status type defines a logical error model that is suitable for different
# programming environments, including REST APIs and RPC APIs. It is used by gRPC
# (https://github.com/grpc). Each Status message contains three pieces of data:
# error code, error message, and error details.You can find out more about this
# error model and how to work with it in the API Design Guide (https://cloud.
# google.com/apis/design/errors).
# Corresponds to the JSON property `error`
# @return [Google::Apis::MonitoringV3::Status]
attr_accessor :error
# The zero-based index in CollectdPayload.values within the parent
# CreateCollectdTimeSeriesRequest.collectd_payloads.
# Corresponds to the JSON property `index`
# @return [Fixnum]
attr_accessor :index
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@error = args[:error] if args.key?(:error)
@index = args[:index] if args.key?(:index)
end
end
# A condition is a true/false test that determines when an alerting policy
# should open an incident. If a condition evaluates to true, it signifies that
# something is wrong.
class Condition
include Google::Apis::Core::Hashable
# A condition type that checks that monitored resources are reporting data. The
# configuration defines a metric and a set of monitored resources. The predicate
# is considered in violation when a time series for the specified metric of a
# monitored resource does not include any data in the specified duration.
# Corresponds to the JSON property `conditionAbsent`
# @return [Google::Apis::MonitoringV3::MetricAbsence]
attr_accessor :condition_absent
# A condition type that allows alert policies to be defined using Monitoring
# Query Language (https://cloud.google.com/monitoring/mql).
# Corresponds to the JSON property `conditionMonitoringQueryLanguage`
# @return [Google::Apis::MonitoringV3::MonitoringQueryLanguageCondition]
attr_accessor :condition_monitoring_query_language
# A condition type that compares a collection of time series against a threshold.
# Corresponds to the JSON property `conditionThreshold`
# @return [Google::Apis::MonitoringV3::MetricThreshold]
attr_accessor :condition_threshold
# A short name or phrase used to identify the condition in dashboards,
# notifications, and incidents. To avoid confusion, don't use the same display
# name for multiple conditions in the same policy.
# Corresponds to the JSON property `displayName`
# @return [String]
attr_accessor :display_name
# Required if the condition exists. The unique resource name for this condition.
# Its format is: projects/[PROJECT_ID_OR_NUMBER]/alertPolicies/[POLICY_ID]/
# conditions/[CONDITION_ID] [CONDITION_ID] is assigned by Stackdriver Monitoring
# when the condition is created as part of a new or updated alerting policy.When
# calling the alertPolicies.create method, do not include the name field in the
# conditions of the requested alerting policy. Stackdriver Monitoring creates
# the condition identifiers and includes them in the new policy.When calling the
# alertPolicies.update method to update a policy, including a condition name
# causes the existing condition to be updated. Conditions without names are
# added to the updated policy. Existing conditions are deleted if they are not
# updated.Best practice is to preserve [CONDITION_ID] if you make only small
# changes, such as those to condition thresholds, durations, or trigger values.
# Otherwise, treat the change as a new condition and let the existing condition
# be deleted.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@condition_absent = args[:condition_absent] if args.key?(:condition_absent)
@condition_monitoring_query_language = args[:condition_monitoring_query_language] if args.key?(:condition_monitoring_query_language)
@condition_threshold = args[:condition_threshold] if args.key?(:condition_threshold)
@display_name = args[:display_name] if args.key?(:display_name)
@name = args[:name] if args.key?(:name)
end
end
# Optional. Used to perform content matching. This allows matching based on
# substrings and regular expressions, together with their negations. Only the
# first 4 MB of an HTTP or HTTPS check's response (and the first 1 MB of a TCP
# check's response) are examined for purposes of content matching.
class ContentMatcher
include Google::Apis::Core::Hashable
# String or regex content to match. Maximum 1024 bytes. An empty content string
# indicates no content matching is to be performed.
# Corresponds to the JSON property `content`
# @return [String]
attr_accessor :content
# The type of content matcher that will be applied to the server output,
# compared to the content string when the check is run.
# Corresponds to the JSON property `matcher`
# @return [String]
attr_accessor :matcher
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@content = args[:content] if args.key?(:content)
@matcher = args[:matcher] if args.key?(:matcher)
end
end
# The CreateCollectdTimeSeries request.
class CreateCollectdTimeSeriesRequest
include Google::Apis::Core::Hashable
# The collectd payloads representing the time series data. You must not include
# more than a single point for each time series, so no two payloads can have the
# same values for all of the fields plugin, plugin_instance, type, and
# type_instance.
# Corresponds to the JSON property `collectdPayloads`
# @return [Array<Google::Apis::MonitoringV3::CollectdPayload>]
attr_accessor :collectd_payloads
# The version of collectd that collected the data. Example: "5.3.0-192.el6".
# Corresponds to the JSON property `collectdVersion`
# @return [String]
attr_accessor :collectd_version
# An object representing a resource that can be used for monitoring, logging,
# billing, or other purposes. Examples include virtual machine instances,
# databases, and storage devices such as disks. The type field identifies a
# MonitoredResourceDescriptor object that describes the resource's schema.
# Information in the labels field identifies the actual resource and its
# attributes according to the schema. For example, a particular Compute Engine
# VM instance could be represented by the following object, because the
# MonitoredResourceDescriptor for "gce_instance" has labels "instance_id" and "
# zone": ` "type": "gce_instance", "labels": ` "instance_id": "12345678901234", "
# zone": "us-central1-a" ``
# Corresponds to the JSON property `resource`
# @return [Google::Apis::MonitoringV3::MonitoredResource]
attr_accessor :resource
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@collectd_payloads = args[:collectd_payloads] if args.key?(:collectd_payloads)
@collectd_version = args[:collectd_version] if args.key?(:collectd_version)
@resource = args[:resource] if args.key?(:resource)
end
end
# The CreateCollectdTimeSeries response.
class CreateCollectdTimeSeriesResponse
include Google::Apis::Core::Hashable
# Records the error status for points that were not written due to an error in
# the request.Failed requests for which nothing is written will return an error
# response instead. Requests where data points were rejected by the backend will
# set summary instead.
# Corresponds to the JSON property `payloadErrors`
# @return [Array<Google::Apis::MonitoringV3::CollectdPayloadError>]
attr_accessor :payload_errors
# Summary of the result of a failed request to write data to a time series.
# Corresponds to the JSON property `summary`
# @return [Google::Apis::MonitoringV3::CreateTimeSeriesSummary]
attr_accessor :summary
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@payload_errors = args[:payload_errors] if args.key?(:payload_errors)
@summary = args[:summary] if args.key?(:summary)
end
end
# The CreateTimeSeries request.
class CreateTimeSeriesRequest
include Google::Apis::Core::Hashable
# Required. The new data to be added to a list of time series. Adds at most one
# data point to each of several time series. The new data point must be more
# recent than any other point in its time series. Each TimeSeries value must
# fully specify a unique time series by supplying all label values for the
# metric and the monitored resource.The maximum number of TimeSeries objects per
# Create request is 200.
# Corresponds to the JSON property `timeSeries`
# @return [Array<Google::Apis::MonitoringV3::TimeSeries>]
attr_accessor :time_series
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@time_series = args[:time_series] if args.key?(:time_series)
end
end
# Summary of the result of a failed request to write data to a time series.
class CreateTimeSeriesSummary
include Google::Apis::Core::Hashable
# The number of points that failed to be written. Order is not guaranteed.
# Corresponds to the JSON property `errors`
# @return [Array<Google::Apis::MonitoringV3::Error>]
attr_accessor :errors
# The number of points that were successfully written.
# Corresponds to the JSON property `successPointCount`
# @return [Fixnum]
attr_accessor :success_point_count
# The number of points in the request.
# Corresponds to the JSON property `totalPointCount`
# @return [Fixnum]
attr_accessor :total_point_count
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@errors = args[:errors] if args.key?(:errors)
@success_point_count = args[:success_point_count] if args.key?(:success_point_count)
@total_point_count = args[:total_point_count] if args.key?(:total_point_count)
end
end
# Custom view of service telemetry. Currently a place-holder pending final
# design.
class Custom
include Google::Apis::Core::Hashable
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
end
end
# Distribution contains summary statistics for a population of values. It
# optionally contains a histogram representing the distribution of those values
# across a set of buckets.The summary statistics are the count, mean, sum of the
# squared deviation from the mean, the minimum, and the maximum of the set of
# population of values. The histogram is based on a sequence of buckets and
# gives a count of values that fall into each bucket. The boundaries of the
# buckets are given either explicitly or by formulas for buckets of fixed or
# exponentially increasing widths.Although it is not forbidden, it is generally
# a bad idea to include non-finite values (infinities or NaNs) in the population
# of values, as this will render the mean and sum_of_squared_deviation fields
# meaningless.
class Distribution
include Google::Apis::Core::Hashable
# Required in the Cloud Monitoring API v3. The values for each bucket specified
# in bucket_options. The sum of the values in bucketCounts must equal the value
# in the count field of the Distribution object. The order of the bucket counts
# follows the numbering schemes described for the three bucket types. The
# underflow bucket has number 0; the finite buckets, if any, have numbers 1
# through N-2; and the overflow bucket has number N-1. The size of bucket_counts
# must not be greater than N. If the size is less than N, then the remaining
# buckets are assigned values of zero.
# Corresponds to the JSON property `bucketCounts`
# @return [Array<Fixnum>]
attr_accessor :bucket_counts
# BucketOptions describes the bucket boundaries used to create a histogram for
# the distribution. The buckets can be in a linear sequence, an exponential
# sequence, or each bucket can be specified explicitly. BucketOptions does not
# include the number of values in each bucket.A bucket has an inclusive lower
# bound and exclusive upper bound for the values that are counted for that
# bucket. The upper bound of a bucket must be strictly greater than the lower
# bound. The sequence of N buckets for a distribution consists of an underflow
# bucket (number 0), zero or more finite buckets (number 1 through N - 2) and an
# overflow bucket (number N - 1). The buckets are contiguous: the lower bound of
# bucket i (i > 0) is the same as the upper bound of bucket i - 1. The buckets
# span the whole range of finite values: lower bound of the underflow bucket is -
# infinity and the upper bound of the overflow bucket is +infinity. The finite
# buckets are so-called because both bounds are finite.
# Corresponds to the JSON property `bucketOptions`
# @return [Google::Apis::MonitoringV3::BucketOptions]
attr_accessor :bucket_options
# The number of values in the population. Must be non-negative. This value must
# equal the sum of the values in bucket_counts if a histogram is provided.
# Corresponds to the JSON property `count`
# @return [Fixnum]
attr_accessor :count
# Must be in increasing order of value field.
# Corresponds to the JSON property `exemplars`
# @return [Array<Google::Apis::MonitoringV3::Exemplar>]
attr_accessor :exemplars
# The arithmetic mean of the values in the population. If count is zero then
# this field must be zero.
# Corresponds to the JSON property `mean`
# @return [Float]
attr_accessor :mean
# The range of the population values.
# Corresponds to the JSON property `range`
# @return [Google::Apis::MonitoringV3::Range]
attr_accessor :range
# The sum of squared deviations from the mean of the values in the population.
# For values x_i this is: Sum[i=1..n]((x_i - mean)^2) Knuth, "The Art of
# Computer Programming", Vol. 2, page 232, 3rd edition describes Welford's
# method for accumulating this sum in one pass.If count is zero then this field
# must be zero.
# Corresponds to the JSON property `sumOfSquaredDeviation`
# @return [Float]
attr_accessor :sum_of_squared_deviation
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@bucket_counts = args[:bucket_counts] if args.key?(:bucket_counts)
@bucket_options = args[:bucket_options] if args.key?(:bucket_options)
@count = args[:count] if args.key?(:count)
@exemplars = args[:exemplars] if args.key?(:exemplars)
@mean = args[:mean] if args.key?(:mean)
@range = args[:range] if args.key?(:range)
@sum_of_squared_deviation = args[:sum_of_squared_deviation] if args.key?(:sum_of_squared_deviation)
end
end
# A DistributionCut defines a TimeSeries and thresholds used for measuring good
# service and total service. The TimeSeries must have ValueType = DISTRIBUTION
# and MetricKind = DELTA or MetricKind = CUMULATIVE. The computed good_service
# will be the count of values x in the Distribution such that range.min <= x <
# range.max.
class DistributionCut
include Google::Apis::Core::Hashable
# A monitoring filter (https://cloud.google.com/monitoring/api/v3/filters)
# specifying a TimeSeries aggregating values. Must have ValueType = DISTRIBUTION
# and MetricKind = DELTA or MetricKind = CUMULATIVE.
# Corresponds to the JSON property `distributionFilter`
# @return [String]
attr_accessor :distribution_filter
# Range of numerical values, inclusive of min and exclusive of max. If the open
# range "< range.max" is desired, set range.min = -infinity. If the open range ">
# = range.min" is desired, set range.max = infinity.
# Corresponds to the JSON property `range`
# @return [Google::Apis::MonitoringV3::GoogleMonitoringV3Range]
attr_accessor :range
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@distribution_filter = args[:distribution_filter] if args.key?(:distribution_filter)
@range = args[:range] if args.key?(:range)
end
end
# A content string and a MIME type that describes the content string's format.
class Documentation
include Google::Apis::Core::Hashable
# The text of the documentation, interpreted according to mime_type. The content
# may not exceed 8,192 Unicode characters and may not exceed more than 10,240
# bytes when encoded in UTF-8 format, whichever is smaller.
# Corresponds to the JSON property `content`
# @return [String]
attr_accessor :content
# The format of the content field. Presently, only the value "text/markdown" is
# supported. See Markdown (https://en.wikipedia.org/wiki/Markdown) for more
# information.
# Corresponds to the JSON property `mimeType`
# @return [String]
attr_accessor :mime_type
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@content = args[:content] if args.key?(:content)
@mime_type = args[:mime_type] if args.key?(:mime_type)
end
end
# A set of (label, value) pairs that were removed from a Distribution time
# series during aggregation and then added as an attachment to a Distribution.
# Exemplar.The full label set for the exemplars is constructed by using the
# dropped pairs in combination with the label values that remain on the
# aggregated Distribution time series. The constructed full label set can be
# used to identify the specific entity, such as the instance or job, which might
# be contributing to a long-tail. However, with dropped labels, the storage
# requirements are reduced because only the aggregated distribution values for a
# large group of time series are stored.Note that there are no guarantees on
# ordering of the labels from exemplar-to-exemplar and from distribution-to-
# distribution in the same stream, and there may be duplicates. It is up to
# clients to resolve any ambiguities.
class DroppedLabels
include Google::Apis::Core::Hashable
# Map from label to its value, for all labels dropped in any aggregation.
# Corresponds to the JSON property `label`
# @return [Hash<String,String>]
attr_accessor :label
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@label = args[:label] if args.key?(:label)
end
end
# A generic empty message that you can re-use to avoid defining duplicated empty
# messages in your APIs. A typical example is to use it as the request or the
# response type of an API method. For instance: service Foo ` rpc Bar(google.
# protobuf.Empty) returns (google.protobuf.Empty); ` The JSON representation for
# Empty is empty JSON object ``.
class Empty
include Google::Apis::Core::Hashable
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
end
end
# Detailed information about an error category.
class Error
include Google::Apis::Core::Hashable
# The number of points that couldn't be written because of status.
# Corresponds to the JSON property `pointCount`
# @return [Fixnum]
attr_accessor :point_count
# The Status type defines a logical error model that is suitable for different
# programming environments, including REST APIs and RPC APIs. It is used by gRPC
# (https://github.com/grpc). Each Status message contains three pieces of data:
# error code, error message, and error details.You can find out more about this
# error model and how to work with it in the API Design Guide (https://cloud.
# google.com/apis/design/errors).
# Corresponds to the JSON property `status`
# @return [Google::Apis::MonitoringV3::Status]
attr_accessor :status
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@point_count = args[:point_count] if args.key?(:point_count)
@status = args[:status] if args.key?(:status)
end
end
# Exemplars are example points that may be used to annotate aggregated
# distribution values. They are metadata that gives information about a
# particular value added to a Distribution bucket, such as a trace ID that was
# active when a value was added. They may contain further information, such as a
# example values and timestamps, origin, etc.
class Exemplar
include Google::Apis::Core::Hashable
# Contextual information about the example value. Examples are:Trace: type.
# googleapis.com/google.monitoring.v3.SpanContextLiteral string: type.googleapis.
# com/google.protobuf.StringValueLabels dropped during aggregation: type.
# googleapis.com/google.monitoring.v3.DroppedLabelsThere may be only a single
# attachment of any given message type in a single exemplar, and this is
# enforced by the system.
# Corresponds to the JSON property `attachments`
# @return [Array<Hash<String,Object>>]
attr_accessor :attachments
# The observation (sampling) time of the above value.
# Corresponds to the JSON property `timestamp`
# @return [String]
attr_accessor :timestamp
# Value of the exemplar point. This value determines to which bucket the
# exemplar belongs.
# Corresponds to the JSON property `value`
# @return [Float]
attr_accessor :value
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@attachments = args[:attachments] if args.key?(:attachments)
@timestamp = args[:timestamp] if args.key?(:timestamp)
@value = args[:value] if args.key?(:value)
end
end
# Specifies a set of buckets with arbitrary widths.There are size(bounds) + 1 (=
# N) buckets. Bucket i has the following boundaries:Upper bound (0 <= i < N-1):
# boundsi Lower bound (1 <= i < N); boundsi - 1The bounds field must contain at
# least one element. If bounds has only one element, then there are no finite
# buckets, and that single element is the common boundary of the overflow and
# underflow buckets.
class Explicit
include Google::Apis::Core::Hashable
# The values must be monotonically increasing.
# Corresponds to the JSON property `bounds`
# @return [Array<Float>]
attr_accessor :bounds
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@bounds = args[:bounds] if args.key?(:bounds)
end
end
# Specifies an exponential sequence of buckets that have a width that is
# proportional to the value of the lower bound. Each bucket represents a
# constant relative uncertainty on a specific value in the bucket.There are
# num_finite_buckets + 2 (= N) buckets. Bucket i has the following boundaries:
# Upper bound (0 <= i < N-1): scale * (growth_factor ^ i). Lower bound (1 <= i <
# N): scale * (growth_factor ^ (i - 1)).
class Exponential
include Google::Apis::Core::Hashable
# Must be greater than 1.
# Corresponds to the JSON property `growthFactor`
# @return [Float]
attr_accessor :growth_factor
# Must be greater than 0.
# Corresponds to the JSON property `numFiniteBuckets`
# @return [Fixnum]
attr_accessor :num_finite_buckets
# Must be greater than 0.
# Corresponds to the JSON property `scale`
# @return [Float]
attr_accessor :scale
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@growth_factor = args[:growth_factor] if args.key?(:growth_factor)
@num_finite_buckets = args[:num_finite_buckets] if args.key?(:num_finite_buckets)
@scale = args[:scale] if args.key?(:scale)
end
end
# A single field of a message type.
class Field
include Google::Apis::Core::Hashable
# The field cardinality.
# Corresponds to the JSON property `cardinality`
# @return [String]
attr_accessor :cardinality
# The string value of the default value of this field. Proto2 syntax only.
# Corresponds to the JSON property `defaultValue`
# @return [String]
attr_accessor :default_value
# The field JSON name.
# Corresponds to the JSON property `jsonName`
# @return [String]
attr_accessor :json_name
# The field type.
# Corresponds to the JSON property `kind`
# @return [String]
attr_accessor :kind
# The field name.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# The field number.
# Corresponds to the JSON property `number`
# @return [Fixnum]
attr_accessor :number
# The index of the field type in Type.oneofs, for message or enumeration types.
# The first type has index 1; zero means the type is not in the list.
# Corresponds to the JSON property `oneofIndex`
# @return [Fixnum]
attr_accessor :oneof_index
# The protocol buffer options.
# Corresponds to the JSON property `options`
# @return [Array<Google::Apis::MonitoringV3::Option>]
attr_accessor :options
# Whether to use alternative packed wire representation.
# Corresponds to the JSON property `packed`
# @return [Boolean]
attr_accessor :packed
alias_method :packed?, :packed
# The field type URL, without the scheme, for message or enumeration types.
# Example: "type.googleapis.com/google.protobuf.Timestamp".
# Corresponds to the JSON property `typeUrl`
# @return [String]
attr_accessor :type_url
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@cardinality = args[:cardinality] if args.key?(:cardinality)
@default_value = args[:default_value] if args.key?(:default_value)
@json_name = args[:json_name] if args.key?(:json_name)
@kind = args[:kind] if args.key?(:kind)
@name = args[:name] if args.key?(:name)
@number = args[:number] if args.key?(:number)
@oneof_index = args[:oneof_index] if args.key?(:oneof_index)
@options = args[:options] if args.key?(:options)
@packed = args[:packed] if args.key?(:packed)
@type_url = args[:type_url] if args.key?(:type_url)
end
end
# The GetNotificationChannelVerificationCode request.
class GetNotificationChannelVerificationCodeRequest
include Google::Apis::Core::Hashable
# The desired expiration time. If specified, the API will guarantee that the
# returned code will not be valid after the specified timestamp; however, the
# API cannot guarantee that the returned code will be valid for at least as long
# as the requested time (the API puts an upper bound on the amount of time for
# which a code may be valid). If omitted, a default expiration will be used,
# which may be less than the max permissible expiration (so specifying an
# expiration may extend the code's lifetime over omitting an expiration, even
# though the API does impose an upper limit on the maximum expiration that is
# permitted).
# Corresponds to the JSON property `expireTime`
# @return [String]
attr_accessor :expire_time
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@expire_time = args[:expire_time] if args.key?(:expire_time)
end
end
# The GetNotificationChannelVerificationCode request.
class GetNotificationChannelVerificationCodeResponse
include Google::Apis::Core::Hashable
# The verification code, which may be used to verify other channels that have an
# equivalent identity (i.e. other channels of the same type with the same
# fingerprint such as other email channels with the same email address or other
# sms channels with the same number).
# Corresponds to the JSON property `code`
# @return [String]
attr_accessor :code
# The expiration time associated with the code that was returned. If an
# expiration was provided in the request, this is the minimum of the requested
# expiration in the request and the max permitted expiration.
# Corresponds to the JSON property `expireTime`
# @return [String]
attr_accessor :expire_time
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@code = args[:code] if args.key?(:code)
@expire_time = args[:expire_time] if args.key?(:expire_time)
end
end
# Range of numerical values, inclusive of min and exclusive of max. If the open
# range "< range.max" is desired, set range.min = -infinity. If the open range ">
# = range.min" is desired, set range.max = infinity.
class GoogleMonitoringV3Range
include Google::Apis::Core::Hashable
# Range maximum.
# Corresponds to the JSON property `max`
# @return [Float]
attr_accessor :max
# Range minimum.
# Corresponds to the JSON property `min`
# @return [Float]
attr_accessor :min
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@max = args[:max] if args.key?(:max)
@min = args[:min] if args.key?(:min)
end
end
# The description of a dynamic collection of monitored resources. Each group has
# a filter that is matched against monitored resources and their associated
# metadata. If a group's filter matches an available monitored resource, then
# that resource is a member of that group. Groups can contain any number of
# monitored resources, and each monitored resource can be a member of any number
# of groups.Groups can be nested in parent-child hierarchies. The parentName
# field identifies an optional parent for each group. If a group has a parent,
# then the only monitored resources available to be matched by the group's
# filter are the resources contained in the parent group. In other words, a
# group contains the monitored resources that match its filter and the filters
# of all the group's ancestors. A group without a parent can contain any
# monitored resource.For example, consider an infrastructure running a set of
# instances with two user-defined tags: "environment" and "role". A parent group
# has a filter, environment="production". A child of that parent group has a
# filter, role="transcoder". The parent group contains all instances in the
# production environment, regardless of their roles. The child group contains
# instances that have the transcoder role and are in the production environment.
# The monitored resources contained in a group can change at any moment,
# depending on what resources exist and what filters are associated with the
# group and its ancestors.
class Group
include Google::Apis::Core::Hashable
# A user-assigned name for this group, used only for display purposes.
# Corresponds to the JSON property `displayName`
# @return [String]
attr_accessor :display_name
# The filter used to determine which monitored resources belong to this group.
# Corresponds to the JSON property `filter`
# @return [String]
attr_accessor :filter
# If true, the members of this group are considered to be a cluster. The system
# can perform additional analysis on groups that are clusters.
# Corresponds to the JSON property `isCluster`
# @return [Boolean]
attr_accessor :is_cluster
alias_method :is_cluster?, :is_cluster
# Output only. The name of this group. The format is: projects/[
# PROJECT_ID_OR_NUMBER]/groups/[GROUP_ID] When creating a group, this field is
# ignored and a new name is created consisting of the project specified in the
# call to CreateGroup and a unique [GROUP_ID] that is generated automatically.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# The name of the group's parent, if it has one. The format is: projects/[
# PROJECT_ID_OR_NUMBER]/groups/[GROUP_ID] For groups with no parent, parent_name
# is the empty string, "".
# Corresponds to the JSON property `parentName`
# @return [String]
attr_accessor :parent_name
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@display_name = args[:display_name] if args.key?(:display_name)
@filter = args[:filter] if args.key?(:filter)
@is_cluster = args[:is_cluster] if args.key?(:is_cluster)
@name = args[:name] if args.key?(:name)
@parent_name = args[:parent_name] if args.key?(:parent_name)
end
end
# Information involved in an HTTP/HTTPS Uptime check request.
class HttpCheck
include Google::Apis::Core::Hashable
# The authentication parameters to provide to the specified resource or URL that
# requires a username and password. Currently, only Basic HTTP authentication (
# https://tools.ietf.org/html/rfc7617) is supported in Uptime checks.
# Corresponds to the JSON property `authInfo`
# @return [Google::Apis::MonitoringV3::BasicAuthentication]
attr_accessor :auth_info
# The request body associated with the HTTP POST request. If content_type is
# URL_ENCODED, the body passed in must be URL-encoded. Users can provide a
# Content-Length header via the headers field or the API will do so. If the
# request_method is GET and body is not empty, the API will return an error. The
# maximum byte size is 1 megabyte. Note: As with all bytes fields, JSON
# representations are base64 encoded. e.g.: "foo=bar" in URL-encoded form is "
# foo%3Dbar" and in base64 encoding is "Zm9vJTI1M0RiYXI=".
# Corresponds to the JSON property `body`
# NOTE: Values are automatically base64 encoded/decoded in the client library.
# @return [String]
attr_accessor :body
# The content type header to use for the check. The following configurations
# result in errors: 1. Content type is specified in both the headers field and
# the content_type field. 2. Request method is GET and content_type is not
# TYPE_UNSPECIFIED 3. Request method is POST and content_type is
# TYPE_UNSPECIFIED. 4. Request method is POST and a "Content-Type" header is
# provided via headers field. The content_type field should be used instead.
# Corresponds to the JSON property `contentType`
# @return [String]
attr_accessor :content_type
# The list of headers to send as part of the Uptime check request. If two
# headers have the same key and different values, they should be entered as a
# single header, with the value being a comma-separated list of all the desired
# values as described at https://www.w3.org/Protocols/rfc2616/rfc2616.txt (page
# 31). Entering two separate headers with the same key in a Create call will
# cause the first to be overwritten by the second. The maximum number of headers
# allowed is 100.
# Corresponds to the JSON property `headers`
# @return [Hash<String,String>]
attr_accessor :headers
# Boolean specifying whether to encrypt the header information. Encryption
# should be specified for any headers related to authentication that you do not
# wish to be seen when retrieving the configuration. The server will be
# responsible for encrypting the headers. On Get/List calls, if mask_headers is
# set to true then the headers will be obscured with ******.
# Corresponds to the JSON property `maskHeaders`
# @return [Boolean]
attr_accessor :mask_headers
alias_method :mask_headers?, :mask_headers
# Optional (defaults to "/"). The path to the page against which to run the
# check. Will be combined with the host (specified within the monitored_resource)
# and port to construct the full URL. If the provided path does not begin with "
# /", a "/" will be prepended automatically.
# Corresponds to the JSON property `path`
# @return [String]
attr_accessor :path
# Optional (defaults to 80 when use_ssl is false, and 443 when use_ssl is true).
# The TCP port on the HTTP server against which to run the check. Will be
# combined with host (specified within the monitored_resource) and path to
# construct the full URL.
# Corresponds to the JSON property `port`
# @return [Fixnum]
attr_accessor :port
# The HTTP request method to use for the check. If set to METHOD_UNSPECIFIED
# then request_method defaults to GET.
# Corresponds to the JSON property `requestMethod`
# @return [String]
attr_accessor :request_method
# If true, use HTTPS instead of HTTP to run the check.
# Corresponds to the JSON property `useSsl`
# @return [Boolean]
attr_accessor :use_ssl
alias_method :use_ssl?, :use_ssl
# Boolean specifying whether to include SSL certificate validation as a part of
# the Uptime check. Only applies to checks where monitored_resource is set to
# uptime_url. If use_ssl is false, setting validate_ssl to true has no effect.
# Corresponds to the JSON property `validateSsl`
# @return [Boolean]
attr_accessor :validate_ssl
alias_method :validate_ssl?, :validate_ssl
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@auth_info = args[:auth_info] if args.key?(:auth_info)
@body = args[:body] if args.key?(:body)
@content_type = args[:content_type] if args.key?(:content_type)
@headers = args[:headers] if args.key?(:headers)
@mask_headers = args[:mask_headers] if args.key?(:mask_headers)
@path = args[:path] if args.key?(:path)
@port = args[:port] if args.key?(:port)
@request_method = args[:request_method] if args.key?(:request_method)
@use_ssl = args[:use_ssl] if args.key?(:use_ssl)
@validate_ssl = args[:validate_ssl] if args.key?(:validate_ssl)
end
end
# An internal checker allows Uptime checks to run on private/internal GCP
# resources.
class InternalChecker
include Google::Apis::Core::Hashable
# The checker's human-readable name. The display name should be unique within a
# Stackdriver Workspace in order to make it easier to identify; however,
# uniqueness is not enforced.
# Corresponds to the JSON property `displayName`
# @return [String]
attr_accessor :display_name
# The GCP zone the Uptime check should egress from. Only respected for internal
# Uptime checks, where internal_network is specified.
# Corresponds to the JSON property `gcpZone`
# @return [String]
attr_accessor :gcp_zone
# A unique resource name for this InternalChecker. The format is: projects/[
# PROJECT_ID_OR_NUMBER]/internalCheckers/[INTERNAL_CHECKER_ID] [
# PROJECT_ID_OR_NUMBER] is the Stackdriver Workspace project for the Uptime
# check config associated with the internal checker.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# The GCP VPC network (https://cloud.google.com/vpc/docs/vpc) where the internal
# resource lives (ex: "default").
# Corresponds to the JSON property `network`
# @return [String]
attr_accessor :network
# The GCP project ID where the internal checker lives. Not necessary the same as
# the Workspace project.
# Corresponds to the JSON property `peerProjectId`
# @return [String]
attr_accessor :peer_project_id
# The current operational state of the internal checker.
# Corresponds to the JSON property `state`
# @return [String]
attr_accessor :state
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@display_name = args[:display_name] if args.key?(:display_name)
@gcp_zone = args[:gcp_zone] if args.key?(:gcp_zone)
@name = args[:name] if args.key?(:name)
@network = args[:network] if args.key?(:network)
@peer_project_id = args[:peer_project_id] if args.key?(:peer_project_id)
@state = args[:state] if args.key?(:state)
end
end
# A description of a label.
class LabelDescriptor
include Google::Apis::Core::Hashable
# A human-readable description for the label.
# Corresponds to the JSON property `description`
# @return [String]
attr_accessor :description
# The key for this label. The key must meet the following criteria: Does not
# exceed 100 characters. Matches the following regular expression: [a-zA-Z][a-zA-
# Z0-9_]* The first character must be an upper- or lower-case letter. The
# remaining characters must be letters, digits, or underscores.
# Corresponds to the JSON property `key`
# @return [String]
attr_accessor :key
# The type of data that can be assigned to the label.
# Corresponds to the JSON property `valueType`
# @return [String]
attr_accessor :value_type
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@description = args[:description] if args.key?(:description)
@key = args[:key] if args.key?(:key)
@value_type = args[:value_type] if args.key?(:value_type)
end
end
# A label value.
class LabelValue
include Google::Apis::Core::Hashable
# A bool label value.
# Corresponds to the JSON property `boolValue`
# @return [Boolean]
attr_accessor :bool_value
alias_method :bool_value?, :bool_value
# An int64 label value.
# Corresponds to the JSON property `int64Value`
# @return [Fixnum]
attr_accessor :int64_value
# A string label value.
# Corresponds to the JSON property `stringValue`
# @return [String]
attr_accessor :string_value
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@bool_value = args[:bool_value] if args.key?(:bool_value)
@int64_value = args[:int64_value] if args.key?(:int64_value)
@string_value = args[:string_value] if args.key?(:string_value)
end
end
# Parameters for a latency threshold SLI.
class LatencyCriteria
include Google::Apis::Core::Hashable
# Good service is defined to be the count of requests made to this service that
# return in no more than threshold.
# Corresponds to the JSON property `threshold`
# @return [String]
attr_accessor :threshold
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@threshold = args[:threshold] if args.key?(:threshold)
end
end
# Specifies a linear sequence of buckets that all have the same width (except
# overflow and underflow). Each bucket represents a constant absolute
# uncertainty on the specific value in the bucket.There are num_finite_buckets +
# 2 (= N) buckets. Bucket i has the following boundaries:Upper bound (0 <= i < N-
# 1): offset + (width * i). Lower bound (1 <= i < N): offset + (width * (i - 1)).
class Linear
include Google::Apis::Core::Hashable
# Must be greater than 0.
# Corresponds to the JSON property `numFiniteBuckets`
# @return [Fixnum]
attr_accessor :num_finite_buckets
# Lower bound of the first bucket.
# Corresponds to the JSON property `offset`
# @return [Float]
attr_accessor :offset
# Must be greater than 0.
# Corresponds to the JSON property `width`
# @return [Float]
attr_accessor :width
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@num_finite_buckets = args[:num_finite_buckets] if args.key?(:num_finite_buckets)
@offset = args[:offset] if args.key?(:offset)
@width = args[:width] if args.key?(:width)
end
end
# The protocol for the ListAlertPolicies response.
class ListAlertPoliciesResponse
include Google::Apis::Core::Hashable
# The returned alert policies.
# Corresponds to the JSON property `alertPolicies`
# @return [Array<Google::Apis::MonitoringV3::AlertPolicy>]
attr_accessor :alert_policies
# If there might be more results than were returned, then this field is set to a
# non-empty value. To see the additional results, use that value as page_token
# in the next call to this method.
# Corresponds to the JSON property `nextPageToken`
# @return [String]
attr_accessor :next_page_token
# The total number of alert policies in all pages. This number is only an
# estimate, and may change in subsequent pages. https://aip.dev/158
# Corresponds to the JSON property `totalSize`
# @return [Fixnum]
attr_accessor :total_size
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@alert_policies = args[:alert_policies] if args.key?(:alert_policies)
@next_page_token = args[:next_page_token] if args.key?(:next_page_token)
@total_size = args[:total_size] if args.key?(:total_size)
end
end
# The ListGroupMembers response.
class ListGroupMembersResponse
include Google::Apis::Core::Hashable
# A set of monitored resources in the group.
# Corresponds to the JSON property `members`
# @return [Array<Google::Apis::MonitoringV3::MonitoredResource>]
attr_accessor :members
# If there are more results than have been returned, then this field is set to a
# non-empty value. To see the additional results, use that value as page_token
# in the next call to this method.
# Corresponds to the JSON property `nextPageToken`
# @return [String]
attr_accessor :next_page_token
# The total number of elements matching this request.
# Corresponds to the JSON property `totalSize`
# @return [Fixnum]
attr_accessor :total_size
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@members = args[:members] if args.key?(:members)
@next_page_token = args[:next_page_token] if args.key?(:next_page_token)
@total_size = args[:total_size] if args.key?(:total_size)
end
end
# The ListGroups response.
class ListGroupsResponse
include Google::Apis::Core::Hashable
# The groups that match the specified filters.
# Corresponds to the JSON property `group`
# @return [Array<Google::Apis::MonitoringV3::Group>]
attr_accessor :group
# If there are more results than have been returned, then this field is set to a
# non-empty value. To see the additional results, use that value as page_token
# in the next call to this method.
# Corresponds to the JSON property `nextPageToken`
# @return [String]
attr_accessor :next_page_token
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@group = args[:group] if args.key?(:group)
@next_page_token = args[:next_page_token] if args.key?(:next_page_token)
end
end
# The ListMetricDescriptors response.
class ListMetricDescriptorsResponse
include Google::Apis::Core::Hashable
# The metric descriptors that are available to the project and that match the
# value of filter, if present.
# Corresponds to the JSON property `metricDescriptors`
# @return [Array<Google::Apis::MonitoringV3::MetricDescriptor>]
attr_accessor :metric_descriptors
# If there are more results than have been returned, then this field is set to a
# non-empty value. To see the additional results, use that value as page_token
# in the next call to this method.
# Corresponds to the JSON property `nextPageToken`
# @return [String]
attr_accessor :next_page_token
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@metric_descriptors = args[:metric_descriptors] if args.key?(:metric_descriptors)
@next_page_token = args[:next_page_token] if args.key?(:next_page_token)
end
end
# The ListMonitoredResourceDescriptors response.
class ListMonitoredResourceDescriptorsResponse
include Google::Apis::Core::Hashable
# If there are more results than have been returned, then this field is set to a
# non-empty value. To see the additional results, use that value as page_token
# in the next call to this method.
# Corresponds to the JSON property `nextPageToken`
# @return [String]
attr_accessor :next_page_token
# The monitored resource descriptors that are available to this project and that
# match filter, if present.
# Corresponds to the JSON property `resourceDescriptors`
# @return [Array<Google::Apis::MonitoringV3::MonitoredResourceDescriptor>]
attr_accessor :resource_descriptors
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@next_page_token = args[:next_page_token] if args.key?(:next_page_token)
@resource_descriptors = args[:resource_descriptors] if args.key?(:resource_descriptors)
end
end
# The ListNotificationChannelDescriptors response.
class ListNotificationChannelDescriptorsResponse
include Google::Apis::Core::Hashable
# The monitored resource descriptors supported for the specified project,
# optionally filtered.
# Corresponds to the JSON property `channelDescriptors`
# @return [Array<Google::Apis::MonitoringV3::NotificationChannelDescriptor>]
attr_accessor :channel_descriptors
# If not empty, indicates that there may be more results that match the request.
# Use the value in the page_token field in a subsequent request to fetch the
# next set of results. If empty, all results have been returned.
# Corresponds to the JSON property `nextPageToken`
# @return [String]
attr_accessor :next_page_token
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@channel_descriptors = args[:channel_descriptors] if args.key?(:channel_descriptors)
@next_page_token = args[:next_page_token] if args.key?(:next_page_token)
end
end
# The ListNotificationChannels response.
class ListNotificationChannelsResponse
include Google::Apis::Core::Hashable
# If not empty, indicates that there may be more results that match the request.
# Use the value in the page_token field in a subsequent request to fetch the
# next set of results. If empty, all results have been returned.
# Corresponds to the JSON property `nextPageToken`
# @return [String]
attr_accessor :next_page_token
# The notification channels defined for the specified project.
# Corresponds to the JSON property `notificationChannels`
# @return [Array<Google::Apis::MonitoringV3::NotificationChannel>]
attr_accessor :notification_channels
# The total number of notification channels in all pages. This number is only an
# estimate, and may change in subsequent pages. https://aip.dev/158
# Corresponds to the JSON property `totalSize`
# @return [Fixnum]
attr_accessor :total_size
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@next_page_token = args[:next_page_token] if args.key?(:next_page_token)
@notification_channels = args[:notification_channels] if args.key?(:notification_channels)
@total_size = args[:total_size] if args.key?(:total_size)
end
end
# The ListServiceLevelObjectives response.
class ListServiceLevelObjectivesResponse
include Google::Apis::Core::Hashable
# If there are more results than have been returned, then this field is set to a
# non-empty value. To see the additional results, use that value as page_token
# in the next call to this method.
# Corresponds to the JSON property `nextPageToken`
# @return [String]
attr_accessor :next_page_token
# The ServiceLevelObjectives matching the specified filter.
# Corresponds to the JSON property `serviceLevelObjectives`
# @return [Array<Google::Apis::MonitoringV3::ServiceLevelObjective>]
attr_accessor :service_level_objectives
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@next_page_token = args[:next_page_token] if args.key?(:next_page_token)
@service_level_objectives = args[:service_level_objectives] if args.key?(:service_level_objectives)
end
end
# The ListServices response.
class ListServicesResponse
include Google::Apis::Core::Hashable
# If there are more results than have been returned, then this field is set to a
# non-empty value. To see the additional results, use that value as page_token
# in the next call to this method.
# Corresponds to the JSON property `nextPageToken`
# @return [String]
attr_accessor :next_page_token
# The Services matching the specified filter.
# Corresponds to the JSON property `services`
# @return [Array<Google::Apis::MonitoringV3::Service>]
attr_accessor :services
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@next_page_token = args[:next_page_token] if args.key?(:next_page_token)
@services = args[:services] if args.key?(:services)
end
end
# The ListTimeSeries response.
class ListTimeSeriesResponse
include Google::Apis::Core::Hashable
# Query execution errors that may have caused the time series data returned to
# be incomplete.
# Corresponds to the JSON property `executionErrors`
# @return [Array<Google::Apis::MonitoringV3::Status>]
attr_accessor :execution_errors
# If there are more results than have been returned, then this field is set to a
# non-empty value. To see the additional results, use that value as page_token
# in the next call to this method.
# Corresponds to the JSON property `nextPageToken`
# @return [String]
attr_accessor :next_page_token
# One or more time series that match the filter included in the request.
# Corresponds to the JSON property `timeSeries`
# @return [Array<Google::Apis::MonitoringV3::TimeSeries>]
attr_accessor :time_series
# The unit in which all time_series point values are reported. unit follows the
# UCUM format for units as seen in https://unitsofmeasure.org/ucum.html. If
# different time_series have different units (for example, because they come
# from different metric types, or a unit is absent), then unit will be "`
# not_a_unit`".
# Corresponds to the JSON property `unit`
# @return [String]
attr_accessor :unit
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@execution_errors = args[:execution_errors] if args.key?(:execution_errors)
@next_page_token = args[:next_page_token] if args.key?(:next_page_token)
@time_series = args[:time_series] if args.key?(:time_series)
@unit = args[:unit] if args.key?(:unit)
end
end
# The protocol for the ListUptimeCheckConfigs response.
class ListUptimeCheckConfigsResponse
include Google::Apis::Core::Hashable
# This field represents the pagination token to retrieve the next page of
# results. If the value is empty, it means no further results for the request.
# To retrieve the next page of results, the value of the next_page_token is
# passed to the subsequent List method call (in the request message's page_token
# field).
# Corresponds to the JSON property `nextPageToken`
# @return [String]
attr_accessor :next_page_token
# The total number of Uptime check configurations for the project, irrespective
# of any pagination.
# Corresponds to the JSON property `totalSize`
# @return [Fixnum]
attr_accessor :total_size
# The returned Uptime check configurations.
# Corresponds to the JSON property `uptimeCheckConfigs`
# @return [Array<Google::Apis::MonitoringV3::UptimeCheckConfig>]
attr_accessor :uptime_check_configs
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@next_page_token = args[:next_page_token] if args.key?(:next_page_token)
@total_size = args[:total_size] if args.key?(:total_size)
@uptime_check_configs = args[:uptime_check_configs] if args.key?(:uptime_check_configs)
end
end
# The protocol for the ListUptimeCheckIps response.
class ListUptimeCheckIpsResponse
include Google::Apis::Core::Hashable
# This field represents the pagination token to retrieve the next page of
# results. If the value is empty, it means no further results for the request.
# To retrieve the next page of results, the value of the next_page_token is
# passed to the subsequent List method call (in the request message's page_token
# field). NOTE: this field is not yet implemented
# Corresponds to the JSON property `nextPageToken`
# @return [String]
attr_accessor :next_page_token
# The returned list of IP addresses (including region and location) that the
# checkers run from.
# Corresponds to the JSON property `uptimeCheckIps`
# @return [Array<Google::Apis::MonitoringV3::UptimeCheckIp>]
attr_accessor :uptime_check_ips
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@next_page_token = args[:next_page_token] if args.key?(:next_page_token)
@uptime_check_ips = args[:uptime_check_ips] if args.key?(:uptime_check_ips)
end
end
# Istio service scoped to an Istio mesh. Anthos clusters running ASM < 1.6.8
# will have their services ingested as this type.
class MeshIstio
include Google::Apis::Core::Hashable
# Identifier for the mesh in which this Istio service is defined. Corresponds to
# the mesh_uid metric label in Istio metrics.
# Corresponds to the JSON property `meshUid`
# @return [String]
attr_accessor :mesh_uid
# The name of the Istio service underlying this service. Corresponds to the
# destination_service_name metric label in Istio metrics.
# Corresponds to the JSON property `serviceName`
# @return [String]
attr_accessor :service_name
# The namespace of the Istio service underlying this service. Corresponds to the
# destination_service_namespace metric label in Istio metrics.
# Corresponds to the JSON property `serviceNamespace`
# @return [String]
attr_accessor :service_namespace
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@mesh_uid = args[:mesh_uid] if args.key?(:mesh_uid)
@service_name = args[:service_name] if args.key?(:service_name)
@service_namespace = args[:service_namespace] if args.key?(:service_namespace)
end
end
# A specific metric, identified by specifying values for all of the labels of a
# MetricDescriptor.
class Metric
include Google::Apis::Core::Hashable
# The set of label values that uniquely identify this metric. All labels listed
# in the MetricDescriptor must be assigned values.
# Corresponds to the JSON property `labels`
# @return [Hash<String,String>]
attr_accessor :labels
# An existing metric type, see google.api.MetricDescriptor. For example, custom.
# googleapis.com/invoice/paid/amount.
# Corresponds to the JSON property `type`
# @return [String]
attr_accessor :type
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@labels = args[:labels] if args.key?(:labels)
@type = args[:type] if args.key?(:type)
end
end
# A condition type that checks that monitored resources are reporting data. The
# configuration defines a metric and a set of monitored resources. The predicate
# is considered in violation when a time series for the specified metric of a
# monitored resource does not include any data in the specified duration.
class MetricAbsence
include Google::Apis::Core::Hashable
# Specifies the alignment of data points in individual time series as well as
# how to combine the retrieved time series together (such as when aggregating
# multiple streams on each resource to a single stream for each resource or when
# aggregating streams across all members of a group of resrouces). Multiple
# aggregations are applied in the order specified.This field is similar to the
# one in the ListTimeSeries request (https://cloud.google.com/monitoring/api/
# ref_v3/rest/v3/projects.timeSeries/list). It is advisable to use the
# ListTimeSeries method when debugging this field.
# Corresponds to the JSON property `aggregations`
# @return [Array<Google::Apis::MonitoringV3::Aggregation>]
attr_accessor :aggregations
# The amount of time that a time series must fail to report new data to be
# considered failing. Currently, only values that are a multiple of a minute--e.
# g. 60, 120, or 300 seconds--are supported. If an invalid value is given, an
# error will be returned. The Duration.nanos field is ignored.
# Corresponds to the JSON property `duration`
# @return [String]
attr_accessor :duration
# A filter (https://cloud.google.com/monitoring/api/v3/filters) that identifies
# which time series should be compared with the threshold.The filter is similar
# to the one that is specified in the ListTimeSeries request (https://cloud.
# google.com/monitoring/api/ref_v3/rest/v3/projects.timeSeries/list) (that call
# is useful to verify the time series that will be retrieved / processed). The
# filter must specify the metric type and the resource type. Optionally, it can
# specify resource labels and metric labels. This field must not exceed 2048
# Unicode characters in length.
# Corresponds to the JSON property `filter`
# @return [String]
attr_accessor :filter
# Specifies how many time series must fail a predicate to trigger a condition.
# If not specified, then a `count: 1` trigger is used.
# Corresponds to the JSON property `trigger`
# @return [Google::Apis::MonitoringV3::Trigger]
attr_accessor :trigger
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@aggregations = args[:aggregations] if args.key?(:aggregations)
@duration = args[:duration] if args.key?(:duration)
@filter = args[:filter] if args.key?(:filter)
@trigger = args[:trigger] if args.key?(:trigger)
end
end
# Defines a metric type and its schema. Once a metric descriptor is created,
# deleting or altering it stops data collection and makes the metric type's
# existing data unusable.
class MetricDescriptor
include Google::Apis::Core::Hashable
# A detailed description of the metric, which can be used in documentation.
# Corresponds to the JSON property `description`
# @return [String]
attr_accessor :description
# A concise name for the metric, which can be displayed in user interfaces. Use
# sentence case without an ending period, for example "Request count". This
# field is optional but it is recommended to be set for any metrics associated
# with user-visible concepts, such as Quota.
# Corresponds to the JSON property `displayName`
# @return [String]
attr_accessor :display_name
# The set of labels that can be used to describe a specific instance of this
# metric type. For example, the appengine.googleapis.com/http/server/
# response_latencies metric type has a label for the HTTP response code,
# response_code, so you can look at latencies for successful responses or just
# for responses that failed.
# Corresponds to the JSON property `labels`
# @return [Array<Google::Apis::MonitoringV3::LabelDescriptor>]
attr_accessor :labels
# Optional. The launch stage of the metric definition.
# Corresponds to the JSON property `launchStage`
# @return [String]
attr_accessor :launch_stage
# Additional annotations that can be used to guide the usage of a metric.
# Corresponds to the JSON property `metadata`
# @return [Google::Apis::MonitoringV3::MetricDescriptorMetadata]
attr_accessor :metadata
# Whether the metric records instantaneous values, changes to a value, etc. Some
# combinations of metric_kind and value_type might not be supported.
# Corresponds to the JSON property `metricKind`
# @return [String]
attr_accessor :metric_kind
# Read-only. If present, then a time series, which is identified partially by a
# metric type and a MonitoredResourceDescriptor, that is associated with this
# metric type can only be associated with one of the monitored resource types
# listed here.
# Corresponds to the JSON property `monitoredResourceTypes`
# @return [Array<String>]
attr_accessor :monitored_resource_types
# The resource name of the metric descriptor.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# The metric type, including its DNS name prefix. The type is not URL-encoded.
# All user-defined metric types have the DNS name custom.googleapis.com or
# external.googleapis.com. Metric types should use a natural hierarchical
# grouping. For example: "custom.googleapis.com/invoice/paid/amount" "external.
# googleapis.com/prometheus/up" "appengine.googleapis.com/http/server/
# response_latencies"
# Corresponds to the JSON property `type`
# @return [String]
attr_accessor :type
# The units in which the metric value is reported. It is only applicable if the
# value_type is INT64, DOUBLE, or DISTRIBUTION. The unit defines the
# representation of the stored metric values.Different systems may scale the
# values to be more easily displayed (so a value of 0.02KBy might be displayed
# as 20By, and a value of 3523KBy might be displayed as 3.5MBy). However, if the
# unit is KBy, then the value of the metric is always in thousands of bytes, no
# matter how it may be displayed..If you want a custom metric to record the
# exact number of CPU-seconds used by a job, you can create an INT64 CUMULATIVE
# metric whose unit is s`CPU` (or equivalently 1s`CPU` or just s). If the job
# uses 12,005 CPU-seconds, then the value is written as 12005.Alternatively, if
# you want a custom metric to record data in a more granular way, you can create
# a DOUBLE CUMULATIVE metric whose unit is ks`CPU`, and then write the value 12.
# 005 (which is 12005/1000), or use Kis`CPU` and write 11.723 (which is 12005/
# 1024).The supported units are a subset of The Unified Code for Units of
# Measure (http://unitsofmeasure.org/ucum.html) standard:Basic units (UNIT) bit
# bit By byte s second min minute h hour d day 1 dimensionlessPrefixes (PREFIX)
# k kilo (10^3) M mega (10^6) G giga (10^9) T tera (10^12) P peta (10^15) E exa (
# 10^18) Z zetta (10^21) Y yotta (10^24) m milli (10^-3) u micro (10^-6) n nano (
# 10^-9) p pico (10^-12) f femto (10^-15) a atto (10^-18) z zepto (10^-21) y
# yocto (10^-24) Ki kibi (2^10) Mi mebi (2^20) Gi gibi (2^30) Ti tebi (2^40) Pi
# pebi (2^50)GrammarThe grammar also includes these connectors: / division or
# ratio (as an infix operator). For examples, kBy/`email` or MiBy/10ms (although
# you should almost never have /s in a metric unit; rates should always be
# computed at query time from the underlying cumulative or delta value). .
# multiplication or composition (as an infix operator). For examples, GBy.d or k`
# watt`.h.The grammar for a unit is as follows: Expression = Component ` "."
# Component ` ` "/" Component ` ; Component = ( [ PREFIX ] UNIT | "%" ) [
# Annotation ] | Annotation | "1" ; Annotation = "`" NAME "`" ; Notes:
# Annotation is just a comment if it follows a UNIT. If the annotation is used
# alone, then the unit is equivalent to 1. For examples, `request`/s == 1/s, By`
# transmitted`/s == By/s. NAME is a sequence of non-blank printable ASCII
# characters not containing ` or `. 1 represents a unitary dimensionless unit (
# https://en.wikipedia.org/wiki/Dimensionless_quantity) of 1, such as in 1/s. It
# is typically used when none of the basic units are appropriate. For example, "
# new users per day" can be represented as 1/d or `new-users`/d (and a metric
# value 5 would mean "5 new users). Alternatively, "thousands of page views per
# day" would be represented as 1000/d or k1/d or k`page_views`/d (and a metric
# value of 5.3 would mean "5300 page views per day"). % represents dimensionless
# value of 1/100, and annotates values giving a percentage (so the metric values
# are typically in the range of 0..100, and a metric value 3 means "3 percent").
# 10^2.% indicates a metric contains a ratio, typically in the range 0..1, that
# will be multiplied by 100 and displayed as a percentage (so a metric value 0.
# 03 means "3 percent").
# Corresponds to the JSON property `unit`
# @return [String]
attr_accessor :unit
# Whether the measurement is an integer, a floating-point number, etc. Some
# combinations of metric_kind and value_type might not be supported.
# Corresponds to the JSON property `valueType`
# @return [String]
attr_accessor :value_type
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@description = args[:description] if args.key?(:description)
@display_name = args[:display_name] if args.key?(:display_name)
@labels = args[:labels] if args.key?(:labels)
@launch_stage = args[:launch_stage] if args.key?(:launch_stage)
@metadata = args[:metadata] if args.key?(:metadata)
@metric_kind = args[:metric_kind] if args.key?(:metric_kind)
@monitored_resource_types = args[:monitored_resource_types] if args.key?(:monitored_resource_types)
@name = args[:name] if args.key?(:name)
@type = args[:type] if args.key?(:type)
@unit = args[:unit] if args.key?(:unit)
@value_type = args[:value_type] if args.key?(:value_type)
end
end
# Additional annotations that can be used to guide the usage of a metric.
class MetricDescriptorMetadata
include Google::Apis::Core::Hashable
# The delay of data points caused by ingestion. Data points older than this age
# are guaranteed to be ingested and available to be read, excluding data loss
# due to errors.
# Corresponds to the JSON property `ingestDelay`
# @return [String]
attr_accessor :ingest_delay
# Deprecated. Must use the MetricDescriptor.launch_stage instead.
# Corresponds to the JSON property `launchStage`
# @return [String]
attr_accessor :launch_stage
# The sampling period of metric data points. For metrics which are written
# periodically, consecutive data points are stored at this time interval,
# excluding data loss due to errors. Metrics with a higher granularity have a
# smaller sampling period.
# Corresponds to the JSON property `samplePeriod`
# @return [String]
attr_accessor :sample_period
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@ingest_delay = args[:ingest_delay] if args.key?(:ingest_delay)
@launch_stage = args[:launch_stage] if args.key?(:launch_stage)
@sample_period = args[:sample_period] if args.key?(:sample_period)
end
end
# A MetricRange is used when each window is good when the value x of a single
# TimeSeries satisfies range.min <= x < range.max. The provided TimeSeries must
# have ValueType = INT64 or ValueType = DOUBLE and MetricKind = GAUGE.
class MetricRange
include Google::Apis::Core::Hashable
# Range of numerical values, inclusive of min and exclusive of max. If the open
# range "< range.max" is desired, set range.min = -infinity. If the open range ">
# = range.min" is desired, set range.max = infinity.
# Corresponds to the JSON property `range`
# @return [Google::Apis::MonitoringV3::GoogleMonitoringV3Range]
attr_accessor :range
# A monitoring filter (https://cloud.google.com/monitoring/api/v3/filters)
# specifying the TimeSeries to use for evaluating window quality.
# Corresponds to the JSON property `timeSeries`
# @return [String]
attr_accessor :time_series
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@range = args[:range] if args.key?(:range)
@time_series = args[:time_series] if args.key?(:time_series)
end
end
# A condition type that compares a collection of time series against a threshold.
class MetricThreshold
include Google::Apis::Core::Hashable
# Specifies the alignment of data points in individual time series as well as
# how to combine the retrieved time series together (such as when aggregating
# multiple streams on each resource to a single stream for each resource or when
# aggregating streams across all members of a group of resrouces). Multiple
# aggregations are applied in the order specified.This field is similar to the
# one in the ListTimeSeries request (https://cloud.google.com/monitoring/api/
# ref_v3/rest/v3/projects.timeSeries/list). It is advisable to use the
# ListTimeSeries method when debugging this field.
# Corresponds to the JSON property `aggregations`
# @return [Array<Google::Apis::MonitoringV3::Aggregation>]
attr_accessor :aggregations
# The comparison to apply between the time series (indicated by filter and
# aggregation) and the threshold (indicated by threshold_value). The comparison
# is applied on each time series, with the time series on the left-hand side and
# the threshold on the right-hand side.Only COMPARISON_LT and COMPARISON_GT are
# supported currently.
# Corresponds to the JSON property `comparison`
# @return [String]
attr_accessor :comparison
# Specifies the alignment of data points in individual time series selected by
# denominatorFilter as well as how to combine the retrieved time series together
# (such as when aggregating multiple streams on each resource to a single stream
# for each resource or when aggregating streams across all members of a group of
# resources).When computing ratios, the aggregations and
# denominator_aggregations fields must use the same alignment period and produce
# time series that have the same periodicity and labels.
# Corresponds to the JSON property `denominatorAggregations`
# @return [Array<Google::Apis::MonitoringV3::Aggregation>]
attr_accessor :denominator_aggregations
# A filter (https://cloud.google.com/monitoring/api/v3/filters) that identifies
# a time series that should be used as the denominator of a ratio that will be
# compared with the threshold. If a denominator_filter is specified, the time
# series specified by the filter field will be used as the numerator.The filter
# must specify the metric type and optionally may contain restrictions on
# resource type, resource labels, and metric labels. This field may not exceed
# 2048 Unicode characters in length.
# Corresponds to the JSON property `denominatorFilter`
# @return [String]
attr_accessor :denominator_filter
# The amount of time that a time series must violate the threshold to be
# considered failing. Currently, only values that are a multiple of a minute--e.
# g., 0, 60, 120, or 300 seconds--are supported. If an invalid value is given,
# an error will be returned. When choosing a duration, it is useful to keep in
# mind the frequency of the underlying time series data (which may also be
# affected by any alignments specified in the aggregations field); a good
# duration is long enough so that a single outlier does not generate spurious
# alerts, but short enough that unhealthy states are detected and alerted on
# quickly.
# Corresponds to the JSON property `duration`
# @return [String]
attr_accessor :duration
# A filter (https://cloud.google.com/monitoring/api/v3/filters) that identifies
# which time series should be compared with the threshold.The filter is similar
# to the one that is specified in the ListTimeSeries request (https://cloud.
# google.com/monitoring/api/ref_v3/rest/v3/projects.timeSeries/list) (that call
# is useful to verify the time series that will be retrieved / processed). The
# filter must specify the metric type and the resource type. Optionally, it can
# specify resource labels and metric labels. This field must not exceed 2048
# Unicode characters in length.
# Corresponds to the JSON property `filter`
# @return [String]
attr_accessor :filter
# A value against which to compare the time series.
# Corresponds to the JSON property `thresholdValue`
# @return [Float]
attr_accessor :threshold_value
# Specifies how many time series must fail a predicate to trigger a condition.
# If not specified, then a `count: 1` trigger is used.
# Corresponds to the JSON property `trigger`
# @return [Google::Apis::MonitoringV3::Trigger]
attr_accessor :trigger
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@aggregations = args[:aggregations] if args.key?(:aggregations)
@comparison = args[:comparison] if args.key?(:comparison)
@denominator_aggregations = args[:denominator_aggregations] if args.key?(:denominator_aggregations)
@denominator_filter = args[:denominator_filter] if args.key?(:denominator_filter)
@duration = args[:duration] if args.key?(:duration)
@filter = args[:filter] if args.key?(:filter)
@threshold_value = args[:threshold_value] if args.key?(:threshold_value)
@trigger = args[:trigger] if args.key?(:trigger)
end
end
# An object representing a resource that can be used for monitoring, logging,
# billing, or other purposes. Examples include virtual machine instances,
# databases, and storage devices such as disks. The type field identifies a
# MonitoredResourceDescriptor object that describes the resource's schema.
# Information in the labels field identifies the actual resource and its
# attributes according to the schema. For example, a particular Compute Engine
# VM instance could be represented by the following object, because the
# MonitoredResourceDescriptor for "gce_instance" has labels "instance_id" and "
# zone": ` "type": "gce_instance", "labels": ` "instance_id": "12345678901234", "
# zone": "us-central1-a" ``
class MonitoredResource
include Google::Apis::Core::Hashable
# Required. Values for all of the labels listed in the associated monitored
# resource descriptor. For example, Compute Engine VM instances use the labels "
# project_id", "instance_id", and "zone".
# Corresponds to the JSON property `labels`
# @return [Hash<String,String>]
attr_accessor :labels
# Required. The monitored resource type. This field must match the type field of
# a MonitoredResourceDescriptor object. For example, the type of a Compute
# Engine VM instance is gce_instance. For a list of types, see Monitoring
# resource types and Logging resource types.
# Corresponds to the JSON property `type`
# @return [String]
attr_accessor :type
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@labels = args[:labels] if args.key?(:labels)
@type = args[:type] if args.key?(:type)
end
end
# An object that describes the schema of a MonitoredResource object using a type
# name and a set of labels. For example, the monitored resource descriptor for
# Google Compute Engine VM instances has a type of "gce_instance" and specifies
# the use of the labels "instance_id" and "zone" to identify particular VM
# instances.Different APIs can support different monitored resource types. APIs
# generally provide a list method that returns the monitored resource
# descriptors used by the API.
class MonitoredResourceDescriptor
include Google::Apis::Core::Hashable
# Optional. A detailed description of the monitored resource type that might be
# used in documentation.
# Corresponds to the JSON property `description`
# @return [String]
attr_accessor :description
# Optional. A concise name for the monitored resource type that might be
# displayed in user interfaces. It should be a Title Cased Noun Phrase, without
# any article or other determiners. For example, "Google Cloud SQL Database".
# Corresponds to the JSON property `displayName`
# @return [String]
attr_accessor :display_name
# Required. A set of labels used to describe instances of this monitored
# resource type. For example, an individual Google Cloud SQL database is
# identified by values for the labels "database_id" and "zone".
# Corresponds to the JSON property `labels`
# @return [Array<Google::Apis::MonitoringV3::LabelDescriptor>]
attr_accessor :labels
# Optional. The launch stage of the monitored resource definition.
# Corresponds to the JSON property `launchStage`
# @return [String]
attr_accessor :launch_stage
# Optional. The resource name of the monitored resource descriptor: "projects/`
# project_id`/monitoredResourceDescriptors/`type`" where `type` is the value of
# the type field in this object and `project_id` is a project ID that provides
# API-specific context for accessing the type. APIs that do not use project
# information can use the resource name format "monitoredResourceDescriptors/`
# type`".
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# Required. The monitored resource type. For example, the type "
# cloudsql_database" represents databases in Google Cloud SQL.
# Corresponds to the JSON property `type`
# @return [String]
attr_accessor :type
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@description = args[:description] if args.key?(:description)
@display_name = args[:display_name] if args.key?(:display_name)
@labels = args[:labels] if args.key?(:labels)
@launch_stage = args[:launch_stage] if args.key?(:launch_stage)
@name = args[:name] if args.key?(:name)
@type = args[:type] if args.key?(:type)
end
end
# Auxiliary metadata for a MonitoredResource object. MonitoredResource objects
# contain the minimum set of information to uniquely identify a monitored
# resource instance. There is some other useful auxiliary metadata. Monitoring
# and Logging use an ingestion pipeline to extract metadata for cloud resources
# of all types, and store the metadata in this message.
class MonitoredResourceMetadata
include Google::Apis::Core::Hashable
# Output only. Values for predefined system metadata labels. System labels are a
# kind of metadata extracted by Google, including "machine_image", "vpc", "
# subnet_id", "security_group", "name", etc. System label values can be only
# strings, Boolean values, or a list of strings. For example: ` "name": "my-test-
# instance", "security_group": ["a", "b", "c"], "spot_instance": false `
# Corresponds to the JSON property `systemLabels`
# @return [Hash<String,Object>]
attr_accessor :system_labels
# Output only. A map of user-defined metadata labels.
# Corresponds to the JSON property `userLabels`
# @return [Hash<String,String>]
attr_accessor :user_labels
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@system_labels = args[:system_labels] if args.key?(:system_labels)
@user_labels = args[:user_labels] if args.key?(:user_labels)
end
end
# A condition type that allows alert policies to be defined using Monitoring
# Query Language (https://cloud.google.com/monitoring/mql).
class MonitoringQueryLanguageCondition
include Google::Apis::Core::Hashable
# The amount of time that a time series must violate the threshold to be
# considered failing. Currently, only values that are a multiple of a minute--e.
# g., 0, 60, 120, or 300 seconds--are supported. If an invalid value is given,
# an error will be returned. When choosing a duration, it is useful to keep in
# mind the frequency of the underlying time series data (which may also be
# affected by any alignments specified in the aggregations field); a good
# duration is long enough so that a single outlier does not generate spurious
# alerts, but short enough that unhealthy states are detected and alerted on
# quickly.
# Corresponds to the JSON property `duration`
# @return [String]
attr_accessor :duration
# Monitoring Query Language (https://cloud.google.com/monitoring/mql) query that
# outputs a boolean stream.
# Corresponds to the JSON property `query`
# @return [String]
attr_accessor :query
# Specifies how many time series must fail a predicate to trigger a condition.
# If not specified, then a `count: 1` trigger is used.
# Corresponds to the JSON property `trigger`
# @return [Google::Apis::MonitoringV3::Trigger]
attr_accessor :trigger
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@duration = args[:duration] if args.key?(:duration)
@query = args[:query] if args.key?(:query)
@trigger = args[:trigger] if args.key?(:trigger)
end
end
# Describes a change made to a configuration.
class MutationRecord
include Google::Apis::Core::Hashable
# When the change occurred.
# Corresponds to the JSON property `mutateTime`
# @return [String]
attr_accessor :mutate_time
# The email address of the user making the change.
# Corresponds to the JSON property `mutatedBy`
# @return [String]
attr_accessor :mutated_by
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@mutate_time = args[:mutate_time] if args.key?(:mutate_time)
@mutated_by = args[:mutated_by] if args.key?(:mutated_by)
end
end
# A NotificationChannel is a medium through which an alert is delivered when a
# policy violation is detected. Examples of channels include email, SMS, and
# third-party messaging applications. Fields containing sensitive information
# like authentication tokens or contact info are only partially populated on
# retrieval.
class NotificationChannel
include Google::Apis::Core::Hashable
# An optional human-readable description of this notification channel. This
# description may provide additional details, beyond the display name, for the
# channel. This may not exceed 1024 Unicode characters.
# Corresponds to the JSON property `description`
# @return [String]
attr_accessor :description
# An optional human-readable name for this notification channel. It is
# recommended that you specify a non-empty and unique name in order to make it
# easier to identify the channels in your project, though this is not enforced.
# The display name is limited to 512 Unicode characters.
# Corresponds to the JSON property `displayName`
# @return [String]
attr_accessor :display_name
# Whether notifications are forwarded to the described channel. This makes it
# possible to disable delivery of notifications to a particular channel without
# removing the channel from all alerting policies that reference the channel.
# This is a more convenient approach when the change is temporary and you want
# to receive notifications from the same set of alerting policies on the channel
# at some point in the future.
# Corresponds to the JSON property `enabled`
# @return [Boolean]
attr_accessor :enabled
alias_method :enabled?, :enabled
# Configuration fields that define the channel and its behavior. The permissible
# and required labels are specified in the NotificationChannelDescriptor.labels
# of the NotificationChannelDescriptor corresponding to the type field.
# Corresponds to the JSON property `labels`
# @return [Hash<String,String>]
attr_accessor :labels
# The full REST resource name for this channel. The format is: projects/[
# PROJECT_ID_OR_NUMBER]/notificationChannels/[CHANNEL_ID] The [CHANNEL_ID] is
# automatically assigned by the server on creation.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# The type of the notification channel. This field matches the value of the
# NotificationChannelDescriptor.type field.
# Corresponds to the JSON property `type`
# @return [String]
attr_accessor :type
# User-supplied key/value data that does not need to conform to the
# corresponding NotificationChannelDescriptor's schema, unlike the labels field.
# This field is intended to be used for organizing and identifying the
# NotificationChannel objects.The field can contain up to 64 entries. Each key
# and value is limited to 63 Unicode characters or 128 bytes, whichever is
# smaller. Labels and values can contain only lowercase letters, numerals,
# underscores, and dashes. Keys must begin with a letter.
# Corresponds to the JSON property `userLabels`
# @return [Hash<String,String>]
attr_accessor :user_labels
# Indicates whether this channel has been verified or not. On a
# ListNotificationChannels or GetNotificationChannel operation, this field is
# expected to be populated.If the value is UNVERIFIED, then it indicates that
# the channel is non-functioning (it both requires verification and lacks
# verification); otherwise, it is assumed that the channel works.If the channel
# is neither VERIFIED nor UNVERIFIED, it implies that the channel is of a type
# that does not require verification or that this specific channel has been
# exempted from verification because it was created prior to verification being
# required for channels of this type.This field cannot be modified using a
# standard UpdateNotificationChannel operation. To change the value of this
# field, you must call VerifyNotificationChannel.
# Corresponds to the JSON property `verificationStatus`
# @return [String]
attr_accessor :verification_status
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@description = args[:description] if args.key?(:description)
@display_name = args[:display_name] if args.key?(:display_name)
@enabled = args[:enabled] if args.key?(:enabled)
@labels = args[:labels] if args.key?(:labels)
@name = args[:name] if args.key?(:name)
@type = args[:type] if args.key?(:type)
@user_labels = args[:user_labels] if args.key?(:user_labels)
@verification_status = args[:verification_status] if args.key?(:verification_status)
end
end
# A description of a notification channel. The descriptor includes the
# properties of the channel and the set of labels or fields that must be
# specified to configure channels of a given type.
class NotificationChannelDescriptor
include Google::Apis::Core::Hashable
# A human-readable description of the notification channel type. The description
# may include a description of the properties of the channel and pointers to
# external documentation.
# Corresponds to the JSON property `description`
# @return [String]
attr_accessor :description
# A human-readable name for the notification channel type. This form of the name
# is suitable for a user interface.
# Corresponds to the JSON property `displayName`
# @return [String]
attr_accessor :display_name
# The set of labels that must be defined to identify a particular channel of the
# corresponding type. Each label includes a description for how that field
# should be populated.
# Corresponds to the JSON property `labels`
# @return [Array<Google::Apis::MonitoringV3::LabelDescriptor>]
attr_accessor :labels
# The product launch stage for channels of this type.
# Corresponds to the JSON property `launchStage`
# @return [String]
attr_accessor :launch_stage
# The full REST resource name for this descriptor. The format is: projects/[
# PROJECT_ID_OR_NUMBER]/notificationChannelDescriptors/[TYPE] In the above, [
# TYPE] is the value of the type field.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# The type of notification channel, such as "email" and "sms". To view the full
# list of channels, see Channel descriptors (https://cloud.google.com/monitoring/
# alerts/using-channels-api#ncd). Notification channel types are globally unique.
# Corresponds to the JSON property `type`
# @return [String]
attr_accessor :type
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@description = args[:description] if args.key?(:description)
@display_name = args[:display_name] if args.key?(:display_name)
@labels = args[:labels] if args.key?(:labels)
@launch_stage = args[:launch_stage] if args.key?(:launch_stage)
@name = args[:name] if args.key?(:name)
@type = args[:type] if args.key?(:type)
end
end
# A protocol buffer option, which can be attached to a message, field,
# enumeration, etc.
class Option
include Google::Apis::Core::Hashable
# The option's name. For protobuf built-in options (options defined in
# descriptor.proto), this is the short name. For example, "map_entry". For
# custom options, it should be the fully-qualified name. For example, "google.
# api.http".
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# The option's value packed in an Any message. If the value is a primitive, the
# corresponding wrapper type defined in google/protobuf/wrappers.proto should be
# used. If the value is an enum, it should be stored as an int32 value using the
# google.protobuf.Int32Value type.
# Corresponds to the JSON property `value`
# @return [Hash<String,Object>]
attr_accessor :value
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@name = args[:name] if args.key?(:name)
@value = args[:value] if args.key?(:value)
end
end
# A PerformanceThreshold is used when each window is good when that window has a
# sufficiently high performance.
class PerformanceThreshold
include Google::Apis::Core::Hashable
# An SLI measuring performance on a well-known service type. Performance will be
# computed on the basis of pre-defined metrics. The type of the service_resource
# determines the metrics to use and the service_resource.labels and
# metric_labels are used to construct a monitoring filter to filter that metric
# down to just the data relevant to this service.
# Corresponds to the JSON property `basicSliPerformance`
# @return [Google::Apis::MonitoringV3::BasicSli]
attr_accessor :basic_sli_performance
# Service Level Indicators for which atomic units of service are counted
# directly.
# Corresponds to the JSON property `performance`
# @return [Google::Apis::MonitoringV3::RequestBasedSli]
attr_accessor :performance
# If window performance >= threshold, the window is counted as good.
# Corresponds to the JSON property `threshold`
# @return [Float]
attr_accessor :threshold
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@basic_sli_performance = args[:basic_sli_performance] if args.key?(:basic_sli_performance)
@performance = args[:performance] if args.key?(:performance)
@threshold = args[:threshold] if args.key?(:threshold)
end
end
# A single data point in a time series.
class Point
include Google::Apis::Core::Hashable
# A closed time interval. It extends from the start time to the end time, and
# includes both: [startTime, endTime]. Valid time intervals depend on the
# MetricKind of the metric value. The end time must not be earlier than the
# start time. When writing data points, the start time must not be more than 25
# hours in the past and the end time must not be more than five minutes in the
# future. For GAUGE metrics, the startTime value is technically optional; if no
# value is specified, the start time defaults to the value of the end time, and
# the interval represents a single point in time. If both start and end times
# are specified, they must be identical. Such an interval is valid only for
# GAUGE metrics, which are point-in-time measurements. The end time of a new
# interval must be at least a millisecond after the end time of the previous
# interval. For DELTA metrics, the start time and end time must specify a non-
# zero interval, with subsequent points specifying contiguous and non-
# overlapping intervals. For DELTA metrics, the start time of the next interval
# must be at least a millisecond after the end time of the previous interval.
# For CUMULATIVE metrics, the start time and end time must specify a a non-zero
# interval, with subsequent points specifying the same start time and increasing
# end times, until an event resets the cumulative value to zero and sets a new
# start time for the following points. The new start time must be at least a
# millisecond after the end time of the previous interval. The start time of a
# new interval must be at least a millisecond after the end time of the previous
# interval because intervals are closed. If the start time of a new interval is
# the same as the end time of the previous interval, then data written at the
# new start time could overwrite data written at the previous end time.
# Corresponds to the JSON property `interval`
# @return [Google::Apis::MonitoringV3::TimeInterval]
attr_accessor :interval
# A single strongly-typed value.
# Corresponds to the JSON property `value`
# @return [Google::Apis::MonitoringV3::TypedValue]
attr_accessor :value
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@interval = args[:interval] if args.key?(:interval)
@value = args[:value] if args.key?(:value)
end
end
# A point's value columns and time interval. Each point has one or more point
# values corresponding to the entries in point_descriptors field in the
# TimeSeriesDescriptor associated with this object.
class PointData
include Google::Apis::Core::Hashable
# A closed time interval. It extends from the start time to the end time, and
# includes both: [startTime, endTime]. Valid time intervals depend on the
# MetricKind of the metric value. The end time must not be earlier than the
# start time. When writing data points, the start time must not be more than 25
# hours in the past and the end time must not be more than five minutes in the
# future. For GAUGE metrics, the startTime value is technically optional; if no
# value is specified, the start time defaults to the value of the end time, and
# the interval represents a single point in time. If both start and end times
# are specified, they must be identical. Such an interval is valid only for
# GAUGE metrics, which are point-in-time measurements. The end time of a new
# interval must be at least a millisecond after the end time of the previous
# interval. For DELTA metrics, the start time and end time must specify a non-
# zero interval, with subsequent points specifying contiguous and non-
# overlapping intervals. For DELTA metrics, the start time of the next interval
# must be at least a millisecond after the end time of the previous interval.
# For CUMULATIVE metrics, the start time and end time must specify a a non-zero
# interval, with subsequent points specifying the same start time and increasing
# end times, until an event resets the cumulative value to zero and sets a new
# start time for the following points. The new start time must be at least a
# millisecond after the end time of the previous interval. The start time of a
# new interval must be at least a millisecond after the end time of the previous
# interval because intervals are closed. If the start time of a new interval is
# the same as the end time of the previous interval, then data written at the
# new start time could overwrite data written at the previous end time.
# Corresponds to the JSON property `timeInterval`
# @return [Google::Apis::MonitoringV3::TimeInterval]
attr_accessor :time_interval
# The values that make up the point.
# Corresponds to the JSON property `values`
# @return [Array<Google::Apis::MonitoringV3::TypedValue>]
attr_accessor :values
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@time_interval = args[:time_interval] if args.key?(:time_interval)
@values = args[:values] if args.key?(:values)
end
end
# The QueryTimeSeries request.
class QueryTimeSeriesRequest
include Google::Apis::Core::Hashable
# A positive number that is the maximum number of time_series_data to return.
# Corresponds to the JSON property `pageSize`
# @return [Fixnum]
attr_accessor :page_size
# If this field is not empty then it must contain the nextPageToken value
# returned by a previous call to this method. Using this field causes the method
# to return additional results from the previous method call.
# Corresponds to the JSON property `pageToken`
# @return [String]
attr_accessor :page_token
# Required. The query in the Monitoring Query Language (https://cloud.google.com/
# monitoring/mql/reference) format. The default time zone is in UTC.
# Corresponds to the JSON property `query`
# @return [String]
attr_accessor :query
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@page_size = args[:page_size] if args.key?(:page_size)
@page_token = args[:page_token] if args.key?(:page_token)
@query = args[:query] if args.key?(:query)
end
end
# The QueryTimeSeries response.
class QueryTimeSeriesResponse
include Google::Apis::Core::Hashable
# If there are more results than have been returned, then this field is set to a
# non-empty value. To see the additional results, use that value as page_token
# in the next call to this method.
# Corresponds to the JSON property `nextPageToken`
# @return [String]
attr_accessor :next_page_token
# Query execution errors that may have caused the time series data returned to
# be incomplete. The available data will be available in the response.
# Corresponds to the JSON property `partialErrors`
# @return [Array<Google::Apis::MonitoringV3::Status>]
attr_accessor :partial_errors
# The time series data.
# Corresponds to the JSON property `timeSeriesData`
# @return [Array<Google::Apis::MonitoringV3::TimeSeriesData>]
attr_accessor :time_series_data
# A descriptor for the labels and points in a time series.
# Corresponds to the JSON property `timeSeriesDescriptor`
# @return [Google::Apis::MonitoringV3::TimeSeriesDescriptor]
attr_accessor :time_series_descriptor
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@next_page_token = args[:next_page_token] if args.key?(:next_page_token)
@partial_errors = args[:partial_errors] if args.key?(:partial_errors)
@time_series_data = args[:time_series_data] if args.key?(:time_series_data)
@time_series_descriptor = args[:time_series_descriptor] if args.key?(:time_series_descriptor)
end
end
# The range of the population values.
class Range
include Google::Apis::Core::Hashable
# The maximum of the population values.
# Corresponds to the JSON property `max`
# @return [Float]
attr_accessor :max
# The minimum of the population values.
# Corresponds to the JSON property `min`
# @return [Float]
attr_accessor :min
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@max = args[:max] if args.key?(:max)
@min = args[:min] if args.key?(:min)
end
end
# Service Level Indicators for which atomic units of service are counted
# directly.
class RequestBasedSli
include Google::Apis::Core::Hashable
# A DistributionCut defines a TimeSeries and thresholds used for measuring good
# service and total service. The TimeSeries must have ValueType = DISTRIBUTION
# and MetricKind = DELTA or MetricKind = CUMULATIVE. The computed good_service
# will be the count of values x in the Distribution such that range.min <= x <
# range.max.
# Corresponds to the JSON property `distributionCut`
# @return [Google::Apis::MonitoringV3::DistributionCut]
attr_accessor :distribution_cut
# A TimeSeriesRatio specifies two TimeSeries to use for computing the
# good_service / total_service ratio. The specified TimeSeries must have
# ValueType = DOUBLE or ValueType = INT64 and must have MetricKind = DELTA or
# MetricKind = CUMULATIVE. The TimeSeriesRatio must specify exactly two of good,
# bad, and total, and the relationship good_service + bad_service =
# total_service will be assumed.
# Corresponds to the JSON property `goodTotalRatio`
# @return [Google::Apis::MonitoringV3::TimeSeriesRatio]
attr_accessor :good_total_ratio
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@distribution_cut = args[:distribution_cut] if args.key?(:distribution_cut)
@good_total_ratio = args[:good_total_ratio] if args.key?(:good_total_ratio)
end
end
# The resource submessage for group checks. It can be used instead of a
# monitored resource, when multiple resources are being monitored.
class ResourceGroup
include Google::Apis::Core::Hashable
# The group of resources being monitored. Should be only the [GROUP_ID], and not
# the full-path projects/[PROJECT_ID_OR_NUMBER]/groups/[GROUP_ID].
# Corresponds to the JSON property `groupId`
# @return [String]
attr_accessor :group_id
# The resource type of the group members.
# Corresponds to the JSON property `resourceType`
# @return [String]
attr_accessor :resource_type
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@group_id = args[:group_id] if args.key?(:group_id)
@resource_type = args[:resource_type] if args.key?(:resource_type)
end
end
# The SendNotificationChannelVerificationCode request.
class SendNotificationChannelVerificationCodeRequest
include Google::Apis::Core::Hashable
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
end
end
# A Service is a discrete, autonomous, and network-accessible unit, designed to
# solve an individual concern (Wikipedia (https://en.wikipedia.org/wiki/Service-
# orientation)). In Cloud Monitoring, a Service acts as the root resource under
# which operational aspects of the service are accessible.
class Service
include Google::Apis::Core::Hashable
# App Engine service. Learn more at https://cloud.google.com/appengine.
# Corresponds to the JSON property `appEngine`
# @return [Google::Apis::MonitoringV3::AppEngine]
attr_accessor :app_engine
# Cloud Endpoints service. Learn more at https://cloud.google.com/endpoints.
# Corresponds to the JSON property `cloudEndpoints`
# @return [Google::Apis::MonitoringV3::CloudEndpoints]
attr_accessor :cloud_endpoints
# Istio service scoped to a single Kubernetes cluster. Learn more at http://
# istio.io. Clusters running OSS Istio will have their services ingested as this
# type.
# Corresponds to the JSON property `clusterIstio`
# @return [Google::Apis::MonitoringV3::ClusterIstio]
attr_accessor :cluster_istio
# Custom view of service telemetry. Currently a place-holder pending final
# design.
# Corresponds to the JSON property `custom`
# @return [Google::Apis::MonitoringV3::Custom]
attr_accessor :custom
# Name used for UI elements listing this Service.
# Corresponds to the JSON property `displayName`
# @return [String]
attr_accessor :display_name
# Istio service scoped to an Istio mesh. Anthos clusters running ASM < 1.6.8
# will have their services ingested as this type.
# Corresponds to the JSON property `meshIstio`
# @return [Google::Apis::MonitoringV3::MeshIstio]
attr_accessor :mesh_istio
# Resource name for this Service. The format is: projects/[PROJECT_ID_OR_NUMBER]/
# services/[SERVICE_ID]
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# Configuration for how to query telemetry on a Service.
# Corresponds to the JSON property `telemetry`
# @return [Google::Apis::MonitoringV3::Telemetry]
attr_accessor :telemetry
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@app_engine = args[:app_engine] if args.key?(:app_engine)
@cloud_endpoints = args[:cloud_endpoints] if args.key?(:cloud_endpoints)
@cluster_istio = args[:cluster_istio] if args.key?(:cluster_istio)
@custom = args[:custom] if args.key?(:custom)
@display_name = args[:display_name] if args.key?(:display_name)
@mesh_istio = args[:mesh_istio] if args.key?(:mesh_istio)
@name = args[:name] if args.key?(:name)
@telemetry = args[:telemetry] if args.key?(:telemetry)
end
end
# A Service-Level Indicator (SLI) describes the "performance" of a service. For
# some services, the SLI is well-defined. In such cases, the SLI can be
# described easily by referencing the well-known SLI and providing the needed
# parameters. Alternatively, a "custom" SLI can be defined with a query to the
# underlying metric store. An SLI is defined to be good_service / total_service
# over any queried time interval. The value of performance always falls into the
# range 0 <= performance <= 1. A custom SLI describes how to compute this ratio,
# whether this is by dividing values from a pair of time series, cutting a
# Distribution into good and bad counts, or counting time windows in which the
# service complies with a criterion. For separation of concerns, a single
# Service-Level Indicator measures performance for only one aspect of service
# quality, such as fraction of successful queries or fast-enough queries.
class ServiceLevelIndicator
include Google::Apis::Core::Hashable
# An SLI measuring performance on a well-known service type. Performance will be
# computed on the basis of pre-defined metrics. The type of the service_resource
# determines the metrics to use and the service_resource.labels and
# metric_labels are used to construct a monitoring filter to filter that metric
# down to just the data relevant to this service.
# Corresponds to the JSON property `basicSli`
# @return [Google::Apis::MonitoringV3::BasicSli]
attr_accessor :basic_sli
# Service Level Indicators for which atomic units of service are counted
# directly.
# Corresponds to the JSON property `requestBased`
# @return [Google::Apis::MonitoringV3::RequestBasedSli]
attr_accessor :request_based
# A WindowsBasedSli defines good_service as the count of time windows for which
# the provided service was of good quality. Criteria for determining if service
# was good are embedded in the window_criterion.
# Corresponds to the JSON property `windowsBased`
# @return [Google::Apis::MonitoringV3::WindowsBasedSli]
attr_accessor :windows_based
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@basic_sli = args[:basic_sli] if args.key?(:basic_sli)
@request_based = args[:request_based] if args.key?(:request_based)
@windows_based = args[:windows_based] if args.key?(:windows_based)
end
end
# A Service-Level Objective (SLO) describes a level of desired good service. It
# consists of a service-level indicator (SLI), a performance goal, and a period
# over which the objective is to be evaluated against that goal. The SLO can use
# SLIs defined in a number of different manners. Typical SLOs might include "99%
# of requests in each rolling week have latency below 200 milliseconds" or "99.5%
# of requests in each calendar month return successfully."
class ServiceLevelObjective
include Google::Apis::Core::Hashable
# A calendar period, semantically "since the start of the current ". At this
# time, only DAY, WEEK, FORTNIGHT, and MONTH are supported.
# Corresponds to the JSON property `calendarPeriod`
# @return [String]
attr_accessor :calendar_period
# Name used for UI elements listing this SLO.
# Corresponds to the JSON property `displayName`
# @return [String]
attr_accessor :display_name
# The fraction of service that must be good in order for this objective to be
# met. 0 < goal <= 0.999.
# Corresponds to the JSON property `goal`
# @return [Float]
attr_accessor :goal
# Resource name for this ServiceLevelObjective. The format is: projects/[
# PROJECT_ID_OR_NUMBER]/services/[SERVICE_ID]/serviceLevelObjectives/[SLO_NAME]
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# A rolling time period, semantically "in the past ". Must be an integer
# multiple of 1 day no larger than 30 days.
# Corresponds to the JSON property `rollingPeriod`
# @return [String]
attr_accessor :rolling_period
# A Service-Level Indicator (SLI) describes the "performance" of a service. For
# some services, the SLI is well-defined. In such cases, the SLI can be
# described easily by referencing the well-known SLI and providing the needed
# parameters. Alternatively, a "custom" SLI can be defined with a query to the
# underlying metric store. An SLI is defined to be good_service / total_service
# over any queried time interval. The value of performance always falls into the
# range 0 <= performance <= 1. A custom SLI describes how to compute this ratio,
# whether this is by dividing values from a pair of time series, cutting a
# Distribution into good and bad counts, or counting time windows in which the
# service complies with a criterion. For separation of concerns, a single
# Service-Level Indicator measures performance for only one aspect of service
# quality, such as fraction of successful queries or fast-enough queries.
# Corresponds to the JSON property `serviceLevelIndicator`
# @return [Google::Apis::MonitoringV3::ServiceLevelIndicator]
attr_accessor :service_level_indicator
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@calendar_period = args[:calendar_period] if args.key?(:calendar_period)
@display_name = args[:display_name] if args.key?(:display_name)
@goal = args[:goal] if args.key?(:goal)
@name = args[:name] if args.key?(:name)
@rolling_period = args[:rolling_period] if args.key?(:rolling_period)
@service_level_indicator = args[:service_level_indicator] if args.key?(:service_level_indicator)
end
end
# SourceContext represents information about the source of a protobuf element,
# like the file in which it is defined.
class SourceContext
include Google::Apis::Core::Hashable
# The path-qualified name of the .proto file that contained the associated
# protobuf element. For example: "google/protobuf/source_context.proto".
# Corresponds to the JSON property `fileName`
# @return [String]
attr_accessor :file_name
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@file_name = args[:file_name] if args.key?(:file_name)
end
end
# The context of a span, attached to Exemplars in Distribution values during
# aggregation.It contains the name of a span with format: projects/[
# PROJECT_ID_OR_NUMBER]/traces/[TRACE_ID]/spans/[SPAN_ID]
class SpanContext
include Google::Apis::Core::Hashable
# The resource name of the span. The format is: projects/[PROJECT_ID_OR_NUMBER]/
# traces/[TRACE_ID]/spans/[SPAN_ID] [TRACE_ID] is a unique identifier for a
# trace within a project; it is a 32-character hexadecimal encoding of a 16-byte
# array.[SPAN_ID] is a unique identifier for a span within a trace; it is a 16-
# character hexadecimal encoding of an 8-byte array.
# Corresponds to the JSON property `spanName`
# @return [String]
attr_accessor :span_name
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@span_name = args[:span_name] if args.key?(:span_name)
end
end
# The Status type defines a logical error model that is suitable for different
# programming environments, including REST APIs and RPC APIs. It is used by gRPC
# (https://github.com/grpc). Each Status message contains three pieces of data:
# error code, error message, and error details.You can find out more about this
# error model and how to work with it in the API Design Guide (https://cloud.
# google.com/apis/design/errors).
class Status
include Google::Apis::Core::Hashable
# The status code, which should be an enum value of google.rpc.Code.
# Corresponds to the JSON property `code`
# @return [Fixnum]
attr_accessor :code
# A list of messages that carry the error details. There is a common set of
# message types for APIs to use.
# Corresponds to the JSON property `details`
# @return [Array<Hash<String,Object>>]
attr_accessor :details
# A developer-facing error message, which should be in English. Any user-facing
# error message should be localized and sent in the google.rpc.Status.details
# field, or localized by the client.
# Corresponds to the JSON property `message`
# @return [String]
attr_accessor :message
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@code = args[:code] if args.key?(:code)
@details = args[:details] if args.key?(:details)
@message = args[:message] if args.key?(:message)
end
end
# Information required for a TCP Uptime check request.
class TcpCheck
include Google::Apis::Core::Hashable
# The TCP port on the server against which to run the check. Will be combined
# with host (specified within the monitored_resource) to construct the full URL.
# Required.
# Corresponds to the JSON property `port`
# @return [Fixnum]
attr_accessor :port
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@port = args[:port] if args.key?(:port)
end
end
# Configuration for how to query telemetry on a Service.
class Telemetry
include Google::Apis::Core::Hashable
# The full name of the resource that defines this service. Formatted as
# described in https://cloud.google.com/apis/design/resource_names.
# Corresponds to the JSON property `resourceName`
# @return [String]
attr_accessor :resource_name
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@resource_name = args[:resource_name] if args.key?(:resource_name)
end
end
# A closed time interval. It extends from the start time to the end time, and
# includes both: [startTime, endTime]. Valid time intervals depend on the
# MetricKind of the metric value. The end time must not be earlier than the
# start time. When writing data points, the start time must not be more than 25
# hours in the past and the end time must not be more than five minutes in the
# future. For GAUGE metrics, the startTime value is technically optional; if no
# value is specified, the start time defaults to the value of the end time, and
# the interval represents a single point in time. If both start and end times
# are specified, they must be identical. Such an interval is valid only for
# GAUGE metrics, which are point-in-time measurements. The end time of a new
# interval must be at least a millisecond after the end time of the previous
# interval. For DELTA metrics, the start time and end time must specify a non-
# zero interval, with subsequent points specifying contiguous and non-
# overlapping intervals. For DELTA metrics, the start time of the next interval
# must be at least a millisecond after the end time of the previous interval.
# For CUMULATIVE metrics, the start time and end time must specify a a non-zero
# interval, with subsequent points specifying the same start time and increasing
# end times, until an event resets the cumulative value to zero and sets a new
# start time for the following points. The new start time must be at least a
# millisecond after the end time of the previous interval. The start time of a
# new interval must be at least a millisecond after the end time of the previous
# interval because intervals are closed. If the start time of a new interval is
# the same as the end time of the previous interval, then data written at the
# new start time could overwrite data written at the previous end time.
class TimeInterval
include Google::Apis::Core::Hashable
# Required. The end of the time interval.
# Corresponds to the JSON property `endTime`
# @return [String]
attr_accessor :end_time
# Optional. The beginning of the time interval. The default value for the start
# time is the end time. The start time must not be later than the end time.
# Corresponds to the JSON property `startTime`
# @return [String]
attr_accessor :start_time
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@end_time = args[:end_time] if args.key?(:end_time)
@start_time = args[:start_time] if args.key?(:start_time)
end
end
# A collection of data points that describes the time-varying values of a metric.
# A time series is identified by a combination of a fully-specified monitored
# resource and a fully-specified metric. This type is used for both listing and
# creating time series.
class TimeSeries
include Google::Apis::Core::Hashable
# Auxiliary metadata for a MonitoredResource object. MonitoredResource objects
# contain the minimum set of information to uniquely identify a monitored
# resource instance. There is some other useful auxiliary metadata. Monitoring
# and Logging use an ingestion pipeline to extract metadata for cloud resources
# of all types, and store the metadata in this message.
# Corresponds to the JSON property `metadata`
# @return [Google::Apis::MonitoringV3::MonitoredResourceMetadata]
attr_accessor :metadata
# A specific metric, identified by specifying values for all of the labels of a
# MetricDescriptor.
# Corresponds to the JSON property `metric`
# @return [Google::Apis::MonitoringV3::Metric]
attr_accessor :metric
# The metric kind of the time series. When listing time series, this metric kind
# might be different from the metric kind of the associated metric if this time
# series is an alignment or reduction of other time series.When creating a time
# series, this field is optional. If present, it must be the same as the metric
# kind of the associated metric. If the associated metric's descriptor must be
# auto-created, then this field specifies the metric kind of the new descriptor
# and must be either GAUGE (the default) or CUMULATIVE.
# Corresponds to the JSON property `metricKind`
# @return [String]
attr_accessor :metric_kind
# The data points of this time series. When listing time series, points are
# returned in reverse time order.When creating a time series, this field must
# contain exactly one point and the point's type must be the same as the value
# type of the associated metric. If the associated metric's descriptor must be
# auto-created, then the value type of the descriptor is determined by the point'
# s type, which must be BOOL, INT64, DOUBLE, or DISTRIBUTION.
# Corresponds to the JSON property `points`
# @return [Array<Google::Apis::MonitoringV3::Point>]
attr_accessor :points
# An object representing a resource that can be used for monitoring, logging,
# billing, or other purposes. Examples include virtual machine instances,
# databases, and storage devices such as disks. The type field identifies a
# MonitoredResourceDescriptor object that describes the resource's schema.
# Information in the labels field identifies the actual resource and its
# attributes according to the schema. For example, a particular Compute Engine
# VM instance could be represented by the following object, because the
# MonitoredResourceDescriptor for "gce_instance" has labels "instance_id" and "
# zone": ` "type": "gce_instance", "labels": ` "instance_id": "12345678901234", "
# zone": "us-central1-a" ``
# Corresponds to the JSON property `resource`
# @return [Google::Apis::MonitoringV3::MonitoredResource]
attr_accessor :resource
# The units in which the metric value is reported. It is only applicable if the
# value_type is INT64, DOUBLE, or DISTRIBUTION. The unit defines the
# representation of the stored metric values.
# Corresponds to the JSON property `unit`
# @return [String]
attr_accessor :unit
# The value type of the time series. When listing time series, this value type
# might be different from the value type of the associated metric if this time
# series is an alignment or reduction of other time series.When creating a time
# series, this field is optional. If present, it must be the same as the type of
# the data in the points field.
# Corresponds to the JSON property `valueType`
# @return [String]
attr_accessor :value_type
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@metadata = args[:metadata] if args.key?(:metadata)
@metric = args[:metric] if args.key?(:metric)
@metric_kind = args[:metric_kind] if args.key?(:metric_kind)
@points = args[:points] if args.key?(:points)
@resource = args[:resource] if args.key?(:resource)
@unit = args[:unit] if args.key?(:unit)
@value_type = args[:value_type] if args.key?(:value_type)
end
end
# Represents the values of a time series associated with a TimeSeriesDescriptor.
class TimeSeriesData
include Google::Apis::Core::Hashable
# The values of the labels in the time series identifier, given in the same
# order as the label_descriptors field of the TimeSeriesDescriptor associated
# with this object. Each value must have a value of the type given in the
# corresponding entry of label_descriptors.
# Corresponds to the JSON property `labelValues`
# @return [Array<Google::Apis::MonitoringV3::LabelValue>]
attr_accessor :label_values
# The points in the time series.
# Corresponds to the JSON property `pointData`
# @return [Array<Google::Apis::MonitoringV3::PointData>]
attr_accessor :point_data
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@label_values = args[:label_values] if args.key?(:label_values)
@point_data = args[:point_data] if args.key?(:point_data)
end
end
# A descriptor for the labels and points in a time series.
class TimeSeriesDescriptor
include Google::Apis::Core::Hashable
# Descriptors for the labels.
# Corresponds to the JSON property `labelDescriptors`
# @return [Array<Google::Apis::MonitoringV3::LabelDescriptor>]
attr_accessor :label_descriptors
# Descriptors for the point data value columns.
# Corresponds to the JSON property `pointDescriptors`
# @return [Array<Google::Apis::MonitoringV3::ValueDescriptor>]
attr_accessor :point_descriptors
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@label_descriptors = args[:label_descriptors] if args.key?(:label_descriptors)
@point_descriptors = args[:point_descriptors] if args.key?(:point_descriptors)
end
end
# A TimeSeriesRatio specifies two TimeSeries to use for computing the
# good_service / total_service ratio. The specified TimeSeries must have
# ValueType = DOUBLE or ValueType = INT64 and must have MetricKind = DELTA or
# MetricKind = CUMULATIVE. The TimeSeriesRatio must specify exactly two of good,
# bad, and total, and the relationship good_service + bad_service =
# total_service will be assumed.
class TimeSeriesRatio
include Google::Apis::Core::Hashable
# A monitoring filter (https://cloud.google.com/monitoring/api/v3/filters)
# specifying a TimeSeries quantifying bad service, either demanded service that
# was not provided or demanded service that was of inadequate quality. Must have
# ValueType = DOUBLE or ValueType = INT64 and must have MetricKind = DELTA or
# MetricKind = CUMULATIVE.
# Corresponds to the JSON property `badServiceFilter`
# @return [String]
attr_accessor :bad_service_filter
# A monitoring filter (https://cloud.google.com/monitoring/api/v3/filters)
# specifying a TimeSeries quantifying good service provided. Must have ValueType
# = DOUBLE or ValueType = INT64 and must have MetricKind = DELTA or MetricKind =
# CUMULATIVE.
# Corresponds to the JSON property `goodServiceFilter`
# @return [String]
attr_accessor :good_service_filter
# A monitoring filter (https://cloud.google.com/monitoring/api/v3/filters)
# specifying a TimeSeries quantifying total demanded service. Must have
# ValueType = DOUBLE or ValueType = INT64 and must have MetricKind = DELTA or
# MetricKind = CUMULATIVE.
# Corresponds to the JSON property `totalServiceFilter`
# @return [String]
attr_accessor :total_service_filter
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@bad_service_filter = args[:bad_service_filter] if args.key?(:bad_service_filter)
@good_service_filter = args[:good_service_filter] if args.key?(:good_service_filter)
@total_service_filter = args[:total_service_filter] if args.key?(:total_service_filter)
end
end
# Specifies how many time series must fail a predicate to trigger a condition.
# If not specified, then a `count: 1` trigger is used.
class Trigger
include Google::Apis::Core::Hashable
# The absolute number of time series that must fail the predicate for the
# condition to be triggered.
# Corresponds to the JSON property `count`
# @return [Fixnum]
attr_accessor :count
# The percentage of time series that must fail the predicate for the condition
# to be triggered.
# Corresponds to the JSON property `percent`
# @return [Float]
attr_accessor :percent
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@count = args[:count] if args.key?(:count)
@percent = args[:percent] if args.key?(:percent)
end
end
# A protocol buffer message type.
class Type
include Google::Apis::Core::Hashable
# The list of fields.
# Corresponds to the JSON property `fields`
# @return [Array<Google::Apis::MonitoringV3::Field>]
attr_accessor :fields
# The fully qualified message name.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# The list of types appearing in oneof definitions in this type.
# Corresponds to the JSON property `oneofs`
# @return [Array<String>]
attr_accessor :oneofs
# The protocol buffer options.
# Corresponds to the JSON property `options`
# @return [Array<Google::Apis::MonitoringV3::Option>]
attr_accessor :options
# SourceContext represents information about the source of a protobuf element,
# like the file in which it is defined.
# Corresponds to the JSON property `sourceContext`
# @return [Google::Apis::MonitoringV3::SourceContext]
attr_accessor :source_context
# The source syntax.
# Corresponds to the JSON property `syntax`
# @return [String]
attr_accessor :syntax
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@fields = args[:fields] if args.key?(:fields)
@name = args[:name] if args.key?(:name)
@oneofs = args[:oneofs] if args.key?(:oneofs)
@options = args[:options] if args.key?(:options)
@source_context = args[:source_context] if args.key?(:source_context)
@syntax = args[:syntax] if args.key?(:syntax)
end
end
# A single strongly-typed value.
class TypedValue
include Google::Apis::Core::Hashable
# A Boolean value: true or false.
# Corresponds to the JSON property `boolValue`
# @return [Boolean]
attr_accessor :bool_value
alias_method :bool_value?, :bool_value
# Distribution contains summary statistics for a population of values. It
# optionally contains a histogram representing the distribution of those values
# across a set of buckets.The summary statistics are the count, mean, sum of the
# squared deviation from the mean, the minimum, and the maximum of the set of
# population of values. The histogram is based on a sequence of buckets and
# gives a count of values that fall into each bucket. The boundaries of the
# buckets are given either explicitly or by formulas for buckets of fixed or
# exponentially increasing widths.Although it is not forbidden, it is generally
# a bad idea to include non-finite values (infinities or NaNs) in the population
# of values, as this will render the mean and sum_of_squared_deviation fields
# meaningless.
# Corresponds to the JSON property `distributionValue`
# @return [Google::Apis::MonitoringV3::Distribution]
attr_accessor :distribution_value
# A 64-bit double-precision floating-point number. Its magnitude is
# approximately ±10±300 and it has 16 significant digits of precision.
# Corresponds to the JSON property `doubleValue`
# @return [Float]
attr_accessor :double_value
# A 64-bit integer. Its range is approximately ±9.2x1018.
# Corresponds to the JSON property `int64Value`
# @return [Fixnum]
attr_accessor :int64_value
# A variable-length string value.
# Corresponds to the JSON property `stringValue`
# @return [String]
attr_accessor :string_value
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@bool_value = args[:bool_value] if args.key?(:bool_value)
@distribution_value = args[:distribution_value] if args.key?(:distribution_value)
@double_value = args[:double_value] if args.key?(:double_value)
@int64_value = args[:int64_value] if args.key?(:int64_value)
@string_value = args[:string_value] if args.key?(:string_value)
end
end
# This message configures which resources and services to monitor for
# availability.
class UptimeCheckConfig
include Google::Apis::Core::Hashable
# The content that is expected to appear in the data returned by the target
# server against which the check is run. Currently, only the first entry in the
# content_matchers list is supported, and additional entries will be ignored.
# This field is optional and should only be specified if a content match is
# required as part of the/ Uptime check.
# Corresponds to the JSON property `contentMatchers`
# @return [Array<Google::Apis::MonitoringV3::ContentMatcher>]
attr_accessor :content_matchers
# A human-friendly name for the Uptime check configuration. The display name
# should be unique within a Stackdriver Workspace in order to make it easier to
# identify; however, uniqueness is not enforced. Required.
# Corresponds to the JSON property `displayName`
# @return [String]
attr_accessor :display_name
# Information involved in an HTTP/HTTPS Uptime check request.
# Corresponds to the JSON property `httpCheck`
# @return [Google::Apis::MonitoringV3::HttpCheck]
attr_accessor :http_check
# The internal checkers that this check will egress from. If is_internal is true
# and this list is empty, the check will egress from all the InternalCheckers
# configured for the project that owns this UptimeCheckConfig.
# Corresponds to the JSON property `internalCheckers`
# @return [Array<Google::Apis::MonitoringV3::InternalChecker>]
attr_accessor :internal_checkers
# If this is true, then checks are made only from the 'internal_checkers'. If it
# is false, then checks are made only from the 'selected_regions'. It is an
# error to provide 'selected_regions' when is_internal is true, or to provide '
# internal_checkers' when is_internal is false.
# Corresponds to the JSON property `isInternal`
# @return [Boolean]
attr_accessor :is_internal
alias_method :is_internal?, :is_internal
# An object representing a resource that can be used for monitoring, logging,
# billing, or other purposes. Examples include virtual machine instances,
# databases, and storage devices such as disks. The type field identifies a
# MonitoredResourceDescriptor object that describes the resource's schema.
# Information in the labels field identifies the actual resource and its
# attributes according to the schema. For example, a particular Compute Engine
# VM instance could be represented by the following object, because the
# MonitoredResourceDescriptor for "gce_instance" has labels "instance_id" and "
# zone": ` "type": "gce_instance", "labels": ` "instance_id": "12345678901234", "
# zone": "us-central1-a" ``
# Corresponds to the JSON property `monitoredResource`
# @return [Google::Apis::MonitoringV3::MonitoredResource]
attr_accessor :monitored_resource
# A unique resource name for this Uptime check configuration. The format is:
# projects/[PROJECT_ID_OR_NUMBER]/uptimeCheckConfigs/[UPTIME_CHECK_ID] [
# PROJECT_ID_OR_NUMBER] is the Workspace host project associated with the Uptime
# check.This field should be omitted when creating the Uptime check
# configuration; on create, the resource name is assigned by the server and
# included in the response.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# How often, in seconds, the Uptime check is performed. Currently, the only
# supported values are 60s (1 minute), 300s (5 minutes), 600s (10 minutes), and
# 900s (15 minutes). Optional, defaults to 60s.
# Corresponds to the JSON property `period`
# @return [String]
attr_accessor :period
# The resource submessage for group checks. It can be used instead of a
# monitored resource, when multiple resources are being monitored.
# Corresponds to the JSON property `resourceGroup`
# @return [Google::Apis::MonitoringV3::ResourceGroup]
attr_accessor :resource_group
# The list of regions from which the check will be run. Some regions contain one
# location, and others contain more than one. If this field is specified, enough
# regions must be provided to include a minimum of 3 locations. Not specifying
# this field will result in Uptime checks running from all available regions.
# Corresponds to the JSON property `selectedRegions`
# @return [Array<String>]
attr_accessor :selected_regions
# Information required for a TCP Uptime check request.
# Corresponds to the JSON property `tcpCheck`
# @return [Google::Apis::MonitoringV3::TcpCheck]
attr_accessor :tcp_check
# The maximum amount of time to wait for the request to complete (must be
# between 1 and 60 seconds). Required.
# Corresponds to the JSON property `timeout`
# @return [String]
attr_accessor :timeout
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@content_matchers = args[:content_matchers] if args.key?(:content_matchers)
@display_name = args[:display_name] if args.key?(:display_name)
@http_check = args[:http_check] if args.key?(:http_check)
@internal_checkers = args[:internal_checkers] if args.key?(:internal_checkers)
@is_internal = args[:is_internal] if args.key?(:is_internal)
@monitored_resource = args[:monitored_resource] if args.key?(:monitored_resource)
@name = args[:name] if args.key?(:name)
@period = args[:period] if args.key?(:period)
@resource_group = args[:resource_group] if args.key?(:resource_group)
@selected_regions = args[:selected_regions] if args.key?(:selected_regions)
@tcp_check = args[:tcp_check] if args.key?(:tcp_check)
@timeout = args[:timeout] if args.key?(:timeout)
end
end
# Contains the region, location, and list of IP addresses where checkers in the
# location run from.
class UptimeCheckIp
include Google::Apis::Core::Hashable
# The IP address from which the Uptime check originates. This is a fully
# specified IP address (not an IP address range). Most IP addresses, as of this
# publication, are in IPv4 format; however, one should not rely on the IP
# addresses being in IPv4 format indefinitely, and should support interpreting
# this field in either IPv4 or IPv6 format.
# Corresponds to the JSON property `ipAddress`
# @return [String]
attr_accessor :ip_address
# A more specific location within the region that typically encodes a particular
# city/town/metro (and its containing state/province or country) within the
# broader umbrella region category.
# Corresponds to the JSON property `location`
# @return [String]
attr_accessor :location
# A broad region category in which the IP address is located.
# Corresponds to the JSON property `region`
# @return [String]
attr_accessor :region
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@ip_address = args[:ip_address] if args.key?(:ip_address)
@location = args[:location] if args.key?(:location)
@region = args[:region] if args.key?(:region)
end
end
# A descriptor for the value columns in a data point.
class ValueDescriptor
include Google::Apis::Core::Hashable
# The value key.
# Corresponds to the JSON property `key`
# @return [String]
attr_accessor :key
# The value stream kind.
# Corresponds to the JSON property `metricKind`
# @return [String]
attr_accessor :metric_kind
# The unit in which time_series point values are reported. unit follows the UCUM
# format for units as seen in https://unitsofmeasure.org/ucum.html. unit is only
# valid if value_type is INTEGER, DOUBLE, DISTRIBUTION.
# Corresponds to the JSON property `unit`
# @return [String]
attr_accessor :unit
# The value type.
# Corresponds to the JSON property `valueType`
# @return [String]
attr_accessor :value_type
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@key = args[:key] if args.key?(:key)
@metric_kind = args[:metric_kind] if args.key?(:metric_kind)
@unit = args[:unit] if args.key?(:unit)
@value_type = args[:value_type] if args.key?(:value_type)
end
end
# The VerifyNotificationChannel request.
class VerifyNotificationChannelRequest
include Google::Apis::Core::Hashable
# Required. The verification code that was delivered to the channel as a result
# of invoking the SendNotificationChannelVerificationCode API method or that was
# retrieved from a verified channel via GetNotificationChannelVerificationCode.
# For example, one might have "G-123456" or "TKNZGhhd2EyN3I1MnRnMjRv" (in
# general, one is only guaranteed that the code is valid UTF-8; one should not
# make any assumptions regarding the structure or format of the code).
# Corresponds to the JSON property `code`
# @return [String]
attr_accessor :code
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@code = args[:code] if args.key?(:code)
end
end
# A WindowsBasedSli defines good_service as the count of time windows for which
# the provided service was of good quality. Criteria for determining if service
# was good are embedded in the window_criterion.
class WindowsBasedSli
include Google::Apis::Core::Hashable
# A monitoring filter (https://cloud.google.com/monitoring/api/v3/filters)
# specifying a TimeSeries with ValueType = BOOL. The window is good if any true
# values appear in the window.
# Corresponds to the JSON property `goodBadMetricFilter`
# @return [String]
attr_accessor :good_bad_metric_filter
# A PerformanceThreshold is used when each window is good when that window has a
# sufficiently high performance.
# Corresponds to the JSON property `goodTotalRatioThreshold`
# @return [Google::Apis::MonitoringV3::PerformanceThreshold]
attr_accessor :good_total_ratio_threshold
# A MetricRange is used when each window is good when the value x of a single
# TimeSeries satisfies range.min <= x < range.max. The provided TimeSeries must
# have ValueType = INT64 or ValueType = DOUBLE and MetricKind = GAUGE.
# Corresponds to the JSON property `metricMeanInRange`
# @return [Google::Apis::MonitoringV3::MetricRange]
attr_accessor :metric_mean_in_range
# A MetricRange is used when each window is good when the value x of a single
# TimeSeries satisfies range.min <= x < range.max. The provided TimeSeries must
# have ValueType = INT64 or ValueType = DOUBLE and MetricKind = GAUGE.
# Corresponds to the JSON property `metricSumInRange`
# @return [Google::Apis::MonitoringV3::MetricRange]
attr_accessor :metric_sum_in_range
# Duration over which window quality is evaluated. Must be an integer fraction
# of a day and at least 60s.
# Corresponds to the JSON property `windowPeriod`
# @return [String]
attr_accessor :window_period
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@good_bad_metric_filter = args[:good_bad_metric_filter] if args.key?(:good_bad_metric_filter)
@good_total_ratio_threshold = args[:good_total_ratio_threshold] if args.key?(:good_total_ratio_threshold)
@metric_mean_in_range = args[:metric_mean_in_range] if args.key?(:metric_mean_in_range)
@metric_sum_in_range = args[:metric_sum_in_range] if args.key?(:metric_sum_in_range)
@window_period = args[:window_period] if args.key?(:window_period)
end
end
end
end
end
Reference in New Issue View Git Blame Copy Permalink