chiu
/
google-api-ruby-client
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
google-api-ruby-client/generated/google/apis/remotebuildexecution_v2/classes.rb

3597 lines
176 KiB
Ruby
Raw Blame History

# Copyright 2015 Google Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
require 'date'
require 'google/apis/core/base_service'
require 'google/apis/core/json_representation'
require 'google/apis/core/hashable'
require 'google/apis/errors'
module Google
module Apis
module RemotebuildexecutionV2
# An `Action` captures all the information about an execution which is required
# to reproduce it. `Action`s are the core component of the [Execution] service.
# A single `Action` represents a repeatable action that can be performed by the
# execution service. `Action`s can be succinctly identified by the digest of
# their wire format encoding and, once an `Action` has been executed, will be
# cached in the action cache. Future requests can then use the cached result
# rather than needing to run afresh. When a server completes execution of an
# Action, it MAY choose to cache the result in the ActionCache unless `
# do_not_cache` is `true`. Clients SHOULD expect the server to do so. By default,
# future calls to Execute the same `Action` will also serve their results from
# the cache. Clients must take care to understand the caching behaviour. Ideally,
# all `Action`s will be reproducible so that serving a result from cache is
# always desirable and correct.
class BuildBazelRemoteExecutionV2Action
include Google::Apis::Core::Hashable
# A content digest. A digest for a given blob consists of the size of the blob
# and its hash. The hash algorithm to use is defined by the server. The size is
# considered to be an integral part of the digest and cannot be separated. That
# is, even if the `hash` field is correctly specified but `size_bytes` is not,
# the server MUST reject the request. The reason for including the size in the
# digest is as follows: in a great many cases, the server needs to know the size
# of the blob it is about to work with prior to starting an operation with it,
# such as flattening Merkle tree structures or streaming it to a worker.
# Technically, the server could implement a separate metadata store, but this
# results in a significantly more complicated implementation as opposed to
# having the client specify the size up-front (or storing the size along with
# the digest in every message where digests are embedded). This does mean that
# the API leaks some implementation details of (what we consider to be) a
# reasonable server implementation, but we consider this to be a worthwhile
# tradeoff. When a `Digest` is used to refer to a proto message, it always
# refers to the message in binary encoded form. To ensure consistent hashing,
# clients and servers MUST ensure that they serialize messages according to the
# following rules, even if there are alternate valid encodings for the same
# message: * Fields are serialized in tag order. * There are no unknown fields. *
# There are no duplicate fields. * Fields are serialized according to the
# default semantics for their type. Most protocol buffer implementations will
# always follow these rules when serializing, but care should be taken to avoid
# shortcuts. For instance, concatenating two messages to merge them may produce
# duplicate fields.
# Corresponds to the JSON property `commandDigest`
# @return [Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2Digest]
attr_accessor :command_digest
# If true, then the `Action`'s result cannot be cached, and in-flight requests
# for the same `Action` may not be merged.
# Corresponds to the JSON property `doNotCache`
# @return [Boolean]
attr_accessor :do_not_cache
alias_method :do_not_cache?, :do_not_cache
# A content digest. A digest for a given blob consists of the size of the blob
# and its hash. The hash algorithm to use is defined by the server. The size is
# considered to be an integral part of the digest and cannot be separated. That
# is, even if the `hash` field is correctly specified but `size_bytes` is not,
# the server MUST reject the request. The reason for including the size in the
# digest is as follows: in a great many cases, the server needs to know the size
# of the blob it is about to work with prior to starting an operation with it,
# such as flattening Merkle tree structures or streaming it to a worker.
# Technically, the server could implement a separate metadata store, but this
# results in a significantly more complicated implementation as opposed to
# having the client specify the size up-front (or storing the size along with
# the digest in every message where digests are embedded). This does mean that
# the API leaks some implementation details of (what we consider to be) a
# reasonable server implementation, but we consider this to be a worthwhile
# tradeoff. When a `Digest` is used to refer to a proto message, it always
# refers to the message in binary encoded form. To ensure consistent hashing,
# clients and servers MUST ensure that they serialize messages according to the
# following rules, even if there are alternate valid encodings for the same
# message: * Fields are serialized in tag order. * There are no unknown fields. *
# There are no duplicate fields. * Fields are serialized according to the
# default semantics for their type. Most protocol buffer implementations will
# always follow these rules when serializing, but care should be taken to avoid
# shortcuts. For instance, concatenating two messages to merge them may produce
# duplicate fields.
# Corresponds to the JSON property `inputRootDigest`
# @return [Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2Digest]
attr_accessor :input_root_digest
# List of required supported NodeProperty keys. In order to ensure that
# equivalent `Action`s always hash to the same value, the supported node
# properties MUST be lexicographically sorted by name. Sorting of strings is
# done by code point, equivalently, by the UTF-8 bytes. The interpretation of
# these properties is server-dependent. If a property is not recognized by the
# server, the server will return an `INVALID_ARGUMENT` error.
# Corresponds to the JSON property `outputNodeProperties`
# @return [Array<String>]
attr_accessor :output_node_properties
# A timeout after which the execution should be killed. If the timeout is absent,
# then the client is specifying that the execution should continue as long as
# the server will let it. The server SHOULD impose a timeout if the client does
# not specify one, however, if the client does specify a timeout that is longer
# than the server's maximum timeout, the server MUST reject the request. The
# timeout is a part of the Action message, and therefore two `Actions` with
# different timeouts are different, even if they are otherwise identical. This
# is because, if they were not, running an `Action` with a lower timeout than is
# required might result in a cache hit from an execution run with a longer
# timeout, hiding the fact that the timeout is too short. By encoding it
# directly in the `Action`, a lower timeout will result in a cache miss and the
# execution timeout will fail immediately, rather than whenever the cache entry
# gets evicted.
# Corresponds to the JSON property `timeout`
# @return [String]
attr_accessor :timeout
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@command_digest = args[:command_digest] if args.key?(:command_digest)
@do_not_cache = args[:do_not_cache] if args.key?(:do_not_cache)
@input_root_digest = args[:input_root_digest] if args.key?(:input_root_digest)
@output_node_properties = args[:output_node_properties] if args.key?(:output_node_properties)
@timeout = args[:timeout] if args.key?(:timeout)
end
end
# Describes the server/instance capabilities for updating the action cache.
class BuildBazelRemoteExecutionV2ActionCacheUpdateCapabilities
include Google::Apis::Core::Hashable
#
# Corresponds to the JSON property `updateEnabled`
# @return [Boolean]
attr_accessor :update_enabled
alias_method :update_enabled?, :update_enabled
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@update_enabled = args[:update_enabled] if args.key?(:update_enabled)
end
end
# An ActionResult represents the result of an Action being run.
class BuildBazelRemoteExecutionV2ActionResult
include Google::Apis::Core::Hashable
# ExecutedActionMetadata contains details about a completed execution.
# Corresponds to the JSON property `executionMetadata`
# @return [Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2ExecutedActionMetadata]
attr_accessor :execution_metadata
# The exit code of the command.
# Corresponds to the JSON property `exitCode`
# @return [Fixnum]
attr_accessor :exit_code
# The output directories of the action. For each output directory requested in
# the `output_directories` or `output_paths` field of the Action, if the
# corresponding directory existed after the action completed, a single entry
# will be present in the output list, which will contain the digest of a Tree
# message containing the directory tree, and the path equal exactly to the
# corresponding Action output_directories member. As an example, suppose the
# Action had an output directory `a/b/dir` and the execution produced the
# following contents in `a/b/dir`: a file named `bar` and a directory named `foo`
# with an executable file named `baz`. Then, output_directory will contain (
# hashes shortened for readability): ```json // OutputDirectory proto: ` path: "
# a/b/dir" tree_digest: ` hash: "4a73bc9d03...", size: 55 ` ` // Tree proto with
# hash "4a73bc9d03..." and size 55: ` root: ` files: [ ` name: "bar", digest: `
# hash: "4a73bc9d03...", size: 65534 ` ` ], directories: [ ` name: "foo", digest:
# ` hash: "4cf2eda940...", size: 43 ` ` ] ` children : ` // (Directory proto
# with hash "4cf2eda940..." and size 43) files: [ ` name: "baz", digest: ` hash:
# "b2c941073e...", size: 1294, `, is_executable: true ` ] ` ` ``` If an output
# of the same name as listed in `output_files` of the Command was found in `
# output_directories`, but was not a directory, the server will return a
# FAILED_PRECONDITION.
# Corresponds to the JSON property `outputDirectories`
# @return [Array<Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2OutputDirectory>]
attr_accessor :output_directories
# The output directories of the action that are symbolic links to other
# directories. Those may be links to other output directories, or input
# directories, or even absolute paths outside of the working directory, if the
# server supports SymlinkAbsolutePathStrategy.ALLOWED. For each output directory
# requested in the `output_directories` field of the Action, if the directory
# existed after the action completed, a single entry will be present either in
# this field, or in the `output_directories` field, if the directory was not a
# symbolic link. If an output of the same name was found, but was a symbolic
# link to a file instead of a directory, the server will return a
# FAILED_PRECONDITION. If the action does not produce the requested output, then
# that output will be omitted from the list. The server is free to arrange the
# output list as desired; clients MUST NOT assume that the output list is sorted.
# DEPRECATED as of v2.1. Servers that wish to be compatible with v2.0 API
# should still populate this field in addition to `output_symlinks`.
# Corresponds to the JSON property `outputDirectorySymlinks`
# @return [Array<Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2OutputSymlink>]
attr_accessor :output_directory_symlinks
# The output files of the action that are symbolic links to other files. Those
# may be links to other output files, or input files, or even absolute paths
# outside of the working directory, if the server supports
# SymlinkAbsolutePathStrategy.ALLOWED. For each output file requested in the `
# output_files` or `output_paths` field of the Action, if the corresponding file
# existed after the action completed, a single entry will be present either in
# this field, or in the `output_files` field, if the file was not a symbolic
# link. If an output symbolic link of the same name as listed in `output_files`
# of the Command was found, but its target type was not a regular file, the
# server will return a FAILED_PRECONDITION. If the action does not produce the
# requested output, then that output will be omitted from the list. The server
# is free to arrange the output list as desired; clients MUST NOT assume that
# the output list is sorted. DEPRECATED as of v2.1. Servers that wish to be
# compatible with v2.0 API should still populate this field in addition to `
# output_symlinks`.
# Corresponds to the JSON property `outputFileSymlinks`
# @return [Array<Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2OutputSymlink>]
attr_accessor :output_file_symlinks
# The output files of the action. For each output file requested in the `
# output_files` or `output_paths` field of the Action, if the corresponding file
# existed after the action completed, a single entry will be present either in
# this field, or the `output_file_symlinks` field if the file was a symbolic
# link to another file (`output_symlinks` field after v2.1). If an output listed
# in `output_files` was found, but was a directory rather than a regular file,
# the server will return a FAILED_PRECONDITION. If the action does not produce
# the requested output, then that output will be omitted from the list. The
# server is free to arrange the output list as desired; clients MUST NOT assume
# that the output list is sorted.
# Corresponds to the JSON property `outputFiles`
# @return [Array<Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2OutputFile>]
attr_accessor :output_files
# New in v2.1: this field will only be populated if the command `output_paths`
# field was used, and not the pre v2.1 `output_files` or `output_directories`
# fields. The output paths of the action that are symbolic links to other paths.
# Those may be links to other outputs, or inputs, or even absolute paths outside
# of the working directory, if the server supports SymlinkAbsolutePathStrategy.
# ALLOWED. A single entry for each output requested in `output_paths` field of
# the Action, if the corresponding path existed after the action completed and
# was a symbolic link. If the action does not produce a requested output, then
# that output will be omitted from the list. The server is free to arrange the
# output list as desired; clients MUST NOT assume that the output list is sorted.
# Corresponds to the JSON property `outputSymlinks`
# @return [Array<Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2OutputSymlink>]
attr_accessor :output_symlinks
# A content digest. A digest for a given blob consists of the size of the blob
# and its hash. The hash algorithm to use is defined by the server. The size is
# considered to be an integral part of the digest and cannot be separated. That
# is, even if the `hash` field is correctly specified but `size_bytes` is not,
# the server MUST reject the request. The reason for including the size in the
# digest is as follows: in a great many cases, the server needs to know the size
# of the blob it is about to work with prior to starting an operation with it,
# such as flattening Merkle tree structures or streaming it to a worker.
# Technically, the server could implement a separate metadata store, but this
# results in a significantly more complicated implementation as opposed to
# having the client specify the size up-front (or storing the size along with
# the digest in every message where digests are embedded). This does mean that
# the API leaks some implementation details of (what we consider to be) a
# reasonable server implementation, but we consider this to be a worthwhile
# tradeoff. When a `Digest` is used to refer to a proto message, it always
# refers to the message in binary encoded form. To ensure consistent hashing,
# clients and servers MUST ensure that they serialize messages according to the
# following rules, even if there are alternate valid encodings for the same
# message: * Fields are serialized in tag order. * There are no unknown fields. *
# There are no duplicate fields. * Fields are serialized according to the
# default semantics for their type. Most protocol buffer implementations will
# always follow these rules when serializing, but care should be taken to avoid
# shortcuts. For instance, concatenating two messages to merge them may produce
# duplicate fields.
# Corresponds to the JSON property `stderrDigest`
# @return [Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2Digest]
attr_accessor :stderr_digest
# The standard error buffer of the action. The server SHOULD NOT inline stderr
# unless requested by the client in the GetActionResultRequest message. The
# server MAY omit inlining, even if requested, and MUST do so if inlining would
# cause the response to exceed message size limits.
# Corresponds to the JSON property `stderrRaw`
# NOTE: Values are automatically base64 encoded/decoded in the client library.
# @return [String]
attr_accessor :stderr_raw
# A content digest. A digest for a given blob consists of the size of the blob
# and its hash. The hash algorithm to use is defined by the server. The size is
# considered to be an integral part of the digest and cannot be separated. That
# is, even if the `hash` field is correctly specified but `size_bytes` is not,
# the server MUST reject the request. The reason for including the size in the
# digest is as follows: in a great many cases, the server needs to know the size
# of the blob it is about to work with prior to starting an operation with it,
# such as flattening Merkle tree structures or streaming it to a worker.
# Technically, the server could implement a separate metadata store, but this
# results in a significantly more complicated implementation as opposed to
# having the client specify the size up-front (or storing the size along with
# the digest in every message where digests are embedded). This does mean that
# the API leaks some implementation details of (what we consider to be) a
# reasonable server implementation, but we consider this to be a worthwhile
# tradeoff. When a `Digest` is used to refer to a proto message, it always
# refers to the message in binary encoded form. To ensure consistent hashing,
# clients and servers MUST ensure that they serialize messages according to the
# following rules, even if there are alternate valid encodings for the same
# message: * Fields are serialized in tag order. * There are no unknown fields. *
# There are no duplicate fields. * Fields are serialized according to the
# default semantics for their type. Most protocol buffer implementations will
# always follow these rules when serializing, but care should be taken to avoid
# shortcuts. For instance, concatenating two messages to merge them may produce
# duplicate fields.
# Corresponds to the JSON property `stdoutDigest`
# @return [Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2Digest]
attr_accessor :stdout_digest
# The standard output buffer of the action. The server SHOULD NOT inline stdout
# unless requested by the client in the GetActionResultRequest message. The
# server MAY omit inlining, even if requested, and MUST do so if inlining would
# cause the response to exceed message size limits.
# Corresponds to the JSON property `stdoutRaw`
# NOTE: Values are automatically base64 encoded/decoded in the client library.
# @return [String]
attr_accessor :stdout_raw
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@execution_metadata = args[:execution_metadata] if args.key?(:execution_metadata)
@exit_code = args[:exit_code] if args.key?(:exit_code)
@output_directories = args[:output_directories] if args.key?(:output_directories)
@output_directory_symlinks = args[:output_directory_symlinks] if args.key?(:output_directory_symlinks)
@output_file_symlinks = args[:output_file_symlinks] if args.key?(:output_file_symlinks)
@output_files = args[:output_files] if args.key?(:output_files)
@output_symlinks = args[:output_symlinks] if args.key?(:output_symlinks)
@stderr_digest = args[:stderr_digest] if args.key?(:stderr_digest)
@stderr_raw = args[:stderr_raw] if args.key?(:stderr_raw)
@stdout_digest = args[:stdout_digest] if args.key?(:stdout_digest)
@stdout_raw = args[:stdout_raw] if args.key?(:stdout_raw)
end
end
# A request message for ContentAddressableStorage.BatchReadBlobs.
class BuildBazelRemoteExecutionV2BatchReadBlobsRequest
include Google::Apis::Core::Hashable
# The individual blob digests.
# Corresponds to the JSON property `digests`
# @return [Array<Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2Digest>]
attr_accessor :digests
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@digests = args[:digests] if args.key?(:digests)
end
end
# A response message for ContentAddressableStorage.BatchReadBlobs.
class BuildBazelRemoteExecutionV2BatchReadBlobsResponse
include Google::Apis::Core::Hashable
# The responses to the requests.
# Corresponds to the JSON property `responses`
# @return [Array<Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2BatchReadBlobsResponseResponse>]
attr_accessor :responses
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@responses = args[:responses] if args.key?(:responses)
end
end
# A response corresponding to a single blob that the client tried to download.
class BuildBazelRemoteExecutionV2BatchReadBlobsResponseResponse
include Google::Apis::Core::Hashable
# The raw binary data.
# Corresponds to the JSON property `data`
# NOTE: Values are automatically base64 encoded/decoded in the client library.
# @return [String]
attr_accessor :data
# A content digest. A digest for a given blob consists of the size of the blob
# and its hash. The hash algorithm to use is defined by the server. The size is
# considered to be an integral part of the digest and cannot be separated. That
# is, even if the `hash` field is correctly specified but `size_bytes` is not,
# the server MUST reject the request. The reason for including the size in the
# digest is as follows: in a great many cases, the server needs to know the size
# of the blob it is about to work with prior to starting an operation with it,
# such as flattening Merkle tree structures or streaming it to a worker.
# Technically, the server could implement a separate metadata store, but this
# results in a significantly more complicated implementation as opposed to
# having the client specify the size up-front (or storing the size along with
# the digest in every message where digests are embedded). This does mean that
# the API leaks some implementation details of (what we consider to be) a
# reasonable server implementation, but we consider this to be a worthwhile
# tradeoff. When a `Digest` is used to refer to a proto message, it always
# refers to the message in binary encoded form. To ensure consistent hashing,
# clients and servers MUST ensure that they serialize messages according to the
# following rules, even if there are alternate valid encodings for the same
# message: * Fields are serialized in tag order. * There are no unknown fields. *
# There are no duplicate fields. * Fields are serialized according to the
# default semantics for their type. Most protocol buffer implementations will
# always follow these rules when serializing, but care should be taken to avoid
# shortcuts. For instance, concatenating two messages to merge them may produce
# duplicate fields.
# Corresponds to the JSON property `digest`
# @return [Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2Digest]
attr_accessor :digest
# The `Status` type defines a logical error model that is suitable for different
# programming environments, including REST APIs and RPC APIs. It is used by [
# gRPC](https://github.com/grpc). Each `Status` message contains three pieces of
# data: error code, error message, and error details. You can find out more
# about this error model and how to work with it in the [API Design Guide](https:
# //cloud.google.com/apis/design/errors).
# Corresponds to the JSON property `status`
# @return [Google::Apis::RemotebuildexecutionV2::GoogleRpcStatus]
attr_accessor :status
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data = args[:data] if args.key?(:data)
@digest = args[:digest] if args.key?(:digest)
@status = args[:status] if args.key?(:status)
end
end
# A request message for ContentAddressableStorage.BatchUpdateBlobs.
class BuildBazelRemoteExecutionV2BatchUpdateBlobsRequest
include Google::Apis::Core::Hashable
# The individual upload requests.
# Corresponds to the JSON property `requests`
# @return [Array<Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2BatchUpdateBlobsRequestRequest>]
attr_accessor :requests
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@requests = args[:requests] if args.key?(:requests)
end
end
# A request corresponding to a single blob that the client wants to upload.
class BuildBazelRemoteExecutionV2BatchUpdateBlobsRequestRequest
include Google::Apis::Core::Hashable
# The raw binary data.
# Corresponds to the JSON property `data`
# NOTE: Values are automatically base64 encoded/decoded in the client library.
# @return [String]
attr_accessor :data
# A content digest. A digest for a given blob consists of the size of the blob
# and its hash. The hash algorithm to use is defined by the server. The size is
# considered to be an integral part of the digest and cannot be separated. That
# is, even if the `hash` field is correctly specified but `size_bytes` is not,
# the server MUST reject the request. The reason for including the size in the
# digest is as follows: in a great many cases, the server needs to know the size
# of the blob it is about to work with prior to starting an operation with it,
# such as flattening Merkle tree structures or streaming it to a worker.
# Technically, the server could implement a separate metadata store, but this
# results in a significantly more complicated implementation as opposed to
# having the client specify the size up-front (or storing the size along with
# the digest in every message where digests are embedded). This does mean that
# the API leaks some implementation details of (what we consider to be) a
# reasonable server implementation, but we consider this to be a worthwhile
# tradeoff. When a `Digest` is used to refer to a proto message, it always
# refers to the message in binary encoded form. To ensure consistent hashing,
# clients and servers MUST ensure that they serialize messages according to the
# following rules, even if there are alternate valid encodings for the same
# message: * Fields are serialized in tag order. * There are no unknown fields. *
# There are no duplicate fields. * Fields are serialized according to the
# default semantics for their type. Most protocol buffer implementations will
# always follow these rules when serializing, but care should be taken to avoid
# shortcuts. For instance, concatenating two messages to merge them may produce
# duplicate fields.
# Corresponds to the JSON property `digest`
# @return [Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2Digest]
attr_accessor :digest
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data = args[:data] if args.key?(:data)
@digest = args[:digest] if args.key?(:digest)
end
end
# A response message for ContentAddressableStorage.BatchUpdateBlobs.
class BuildBazelRemoteExecutionV2BatchUpdateBlobsResponse
include Google::Apis::Core::Hashable
# The responses to the requests.
# Corresponds to the JSON property `responses`
# @return [Array<Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2BatchUpdateBlobsResponseResponse>]
attr_accessor :responses
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@responses = args[:responses] if args.key?(:responses)
end
end
# A response corresponding to a single blob that the client tried to upload.
class BuildBazelRemoteExecutionV2BatchUpdateBlobsResponseResponse
include Google::Apis::Core::Hashable
# A content digest. A digest for a given blob consists of the size of the blob
# and its hash. The hash algorithm to use is defined by the server. The size is
# considered to be an integral part of the digest and cannot be separated. That
# is, even if the `hash` field is correctly specified but `size_bytes` is not,
# the server MUST reject the request. The reason for including the size in the
# digest is as follows: in a great many cases, the server needs to know the size
# of the blob it is about to work with prior to starting an operation with it,
# such as flattening Merkle tree structures or streaming it to a worker.
# Technically, the server could implement a separate metadata store, but this
# results in a significantly more complicated implementation as opposed to
# having the client specify the size up-front (or storing the size along with
# the digest in every message where digests are embedded). This does mean that
# the API leaks some implementation details of (what we consider to be) a
# reasonable server implementation, but we consider this to be a worthwhile
# tradeoff. When a `Digest` is used to refer to a proto message, it always
# refers to the message in binary encoded form. To ensure consistent hashing,
# clients and servers MUST ensure that they serialize messages according to the
# following rules, even if there are alternate valid encodings for the same
# message: * Fields are serialized in tag order. * There are no unknown fields. *
# There are no duplicate fields. * Fields are serialized according to the
# default semantics for their type. Most protocol buffer implementations will
# always follow these rules when serializing, but care should be taken to avoid
# shortcuts. For instance, concatenating two messages to merge them may produce
# duplicate fields.
# Corresponds to the JSON property `digest`
# @return [Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2Digest]
attr_accessor :digest
# The `Status` type defines a logical error model that is suitable for different
# programming environments, including REST APIs and RPC APIs. It is used by [
# gRPC](https://github.com/grpc). Each `Status` message contains three pieces of
# data: error code, error message, and error details. You can find out more
# about this error model and how to work with it in the [API Design Guide](https:
# //cloud.google.com/apis/design/errors).
# Corresponds to the JSON property `status`
# @return [Google::Apis::RemotebuildexecutionV2::GoogleRpcStatus]
attr_accessor :status
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@digest = args[:digest] if args.key?(:digest)
@status = args[:status] if args.key?(:status)
end
end
# Capabilities of the remote cache system.
class BuildBazelRemoteExecutionV2CacheCapabilities
include Google::Apis::Core::Hashable
# Describes the server/instance capabilities for updating the action cache.
# Corresponds to the JSON property `actionCacheUpdateCapabilities`
# @return [Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2ActionCacheUpdateCapabilities]
attr_accessor :action_cache_update_capabilities
# Allowed values for priority in ResultsCachePolicy Used for querying both cache
# and execution valid priority ranges.
# Corresponds to the JSON property `cachePriorityCapabilities`
# @return [Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2PriorityCapabilities]
attr_accessor :cache_priority_capabilities
# All the digest functions supported by the remote cache. Remote cache may
# support multiple digest functions simultaneously.
# Corresponds to the JSON property `digestFunction`
# @return [Array<String>]
attr_accessor :digest_function
# Maximum total size of blobs to be uploaded/downloaded using batch methods. A
# value of 0 means no limit is set, although in practice there will always be a
# message size limitation of the protocol in use, e.g. GRPC.
# Corresponds to the JSON property `maxBatchTotalSizeBytes`
# @return [Fixnum]
attr_accessor :max_batch_total_size_bytes
# Whether absolute symlink targets are supported.
# Corresponds to the JSON property `symlinkAbsolutePathStrategy`
# @return [String]
attr_accessor :symlink_absolute_path_strategy
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@action_cache_update_capabilities = args[:action_cache_update_capabilities] if args.key?(:action_cache_update_capabilities)
@cache_priority_capabilities = args[:cache_priority_capabilities] if args.key?(:cache_priority_capabilities)
@digest_function = args[:digest_function] if args.key?(:digest_function)
@max_batch_total_size_bytes = args[:max_batch_total_size_bytes] if args.key?(:max_batch_total_size_bytes)
@symlink_absolute_path_strategy = args[:symlink_absolute_path_strategy] if args.key?(:symlink_absolute_path_strategy)
end
end
# A `Command` is the actual command executed by a worker running an Action and
# specifications of its environment. Except as otherwise required, the
# environment (such as which system libraries or binaries are available, and
# what filesystems are mounted where) is defined by and specific to the
# implementation of the remote execution API.
class BuildBazelRemoteExecutionV2Command
include Google::Apis::Core::Hashable
# The arguments to the command. The first argument must be the path to the
# executable, which must be either a relative path, in which case it is
# evaluated with respect to the input root, or an absolute path.
# Corresponds to the JSON property `arguments`
# @return [Array<String>]
attr_accessor :arguments
# The environment variables to set when running the program. The worker may
# provide its own default environment variables; these defaults can be
# overridden using this field. Additional variables can also be specified. In
# order to ensure that equivalent Commands always hash to the same value, the
# environment variables MUST be lexicographically sorted by name. Sorting of
# strings is done by code point, equivalently, by the UTF-8 bytes.
# Corresponds to the JSON property `environmentVariables`
# @return [Array<Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2CommandEnvironmentVariable>]
attr_accessor :environment_variables
# A list of the output directories that the client expects to retrieve from the
# action. Only the listed directories will be returned (an entire directory
# structure will be returned as a Tree message digest, see OutputDirectory), as
# well as files listed in `output_files`. Other files or directories that may be
# created during command execution are discarded. The paths are relative to the
# working directory of the action execution. The paths are specified using a
# single forward slash (`/`) as a path separator, even if the execution platform
# natively uses a different separator. The path MUST NOT include a trailing
# slash, nor a leading slash, being a relative path. The special value of empty
# string is allowed, although not recommended, and can be used to capture the
# entire working directory tree, including inputs. In order to ensure consistent
# hashing of the same Action, the output paths MUST be sorted lexicographically
# by code point (or, equivalently, by UTF-8 bytes). An output directory cannot
# be duplicated or have the same path as any of the listed output files. An
# output directory is allowed to be a parent of another output directory.
# Directories leading up to the output directories (but not the output
# directories themselves) are created by the worker prior to execution, even if
# they are not explicitly part of the input root. DEPRECATED since 2.1: Use `
# output_paths` instead.
# Corresponds to the JSON property `outputDirectories`
# @return [Array<String>]
attr_accessor :output_directories
# A list of the output files that the client expects to retrieve from the action.
# Only the listed files, as well as directories listed in `output_directories`,
# will be returned to the client as output. Other files or directories that may
# be created during command execution are discarded. The paths are relative to
# the working directory of the action execution. The paths are specified using a
# single forward slash (`/`) as a path separator, even if the execution platform
# natively uses a different separator. The path MUST NOT include a trailing
# slash, nor a leading slash, being a relative path. In order to ensure
# consistent hashing of the same Action, the output paths MUST be sorted
# lexicographically by code point (or, equivalently, by UTF-8 bytes). An output
# file cannot be duplicated, be a parent of another output file, or have the
# same path as any of the listed output directories. Directories leading up to
# the output files are created by the worker prior to execution, even if they
# are not explicitly part of the input root. DEPRECATED since v2.1: Use `
# output_paths` instead.
# Corresponds to the JSON property `outputFiles`
# @return [Array<String>]
attr_accessor :output_files
# A list of the output paths that the client expects to retrieve from the action.
# Only the listed paths will be returned to the client as output. The type of
# the output (file or directory) is not specified, and will be determined by the
# server after action execution. If the resulting path is a file, it will be
# returned in an OutputFile) typed field. If the path is a directory, the entire
# directory structure will be returned as a Tree message digest, see
# OutputDirectory) Other files or directories that may be created during command
# execution are discarded. The paths are relative to the working directory of
# the action execution. The paths are specified using a single forward slash (`/`
# ) as a path separator, even if the execution platform natively uses a
# different separator. The path MUST NOT include a trailing slash, nor a leading
# slash, being a relative path. In order to ensure consistent hashing of the
# same Action, the output paths MUST be deduplicated and sorted
# lexicographically by code point (or, equivalently, by UTF-8 bytes).
# Directories leading up to the output paths are created by the worker prior to
# execution, even if they are not explicitly part of the input root. New in v2.1:
# this field supersedes the DEPRECATED `output_files` and `output_directories`
# fields. If `output_paths` is used, `output_files` and `output_directories`
# will be ignored!
# Corresponds to the JSON property `outputPaths`
# @return [Array<String>]
attr_accessor :output_paths
# A `Platform` is a set of requirements, such as hardware, operating system, or
# compiler toolchain, for an Action's execution environment. A `Platform` is
# represented as a series of key-value pairs representing the properties that
# are required of the platform.
# Corresponds to the JSON property `platform`
# @return [Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2Platform]
attr_accessor :platform
# The working directory, relative to the input root, for the command to run in.
# It must be a directory which exists in the input tree. If it is left empty,
# then the action is run in the input root.
# Corresponds to the JSON property `workingDirectory`
# @return [String]
attr_accessor :working_directory
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@arguments = args[:arguments] if args.key?(:arguments)
@environment_variables = args[:environment_variables] if args.key?(:environment_variables)
@output_directories = args[:output_directories] if args.key?(:output_directories)
@output_files = args[:output_files] if args.key?(:output_files)
@output_paths = args[:output_paths] if args.key?(:output_paths)
@platform = args[:platform] if args.key?(:platform)
@working_directory = args[:working_directory] if args.key?(:working_directory)
end
end
# An `EnvironmentVariable` is one variable to set in the running program's
# environment.
class BuildBazelRemoteExecutionV2CommandEnvironmentVariable
include Google::Apis::Core::Hashable
# The variable name.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# The variable value.
# Corresponds to the JSON property `value`
# @return [String]
attr_accessor :value
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@name = args[:name] if args.key?(:name)
@value = args[:value] if args.key?(:value)
end
end
# A content digest. A digest for a given blob consists of the size of the blob
# and its hash. The hash algorithm to use is defined by the server. The size is
# considered to be an integral part of the digest and cannot be separated. That
# is, even if the `hash` field is correctly specified but `size_bytes` is not,
# the server MUST reject the request. The reason for including the size in the
# digest is as follows: in a great many cases, the server needs to know the size
# of the blob it is about to work with prior to starting an operation with it,
# such as flattening Merkle tree structures or streaming it to a worker.
# Technically, the server could implement a separate metadata store, but this
# results in a significantly more complicated implementation as opposed to
# having the client specify the size up-front (or storing the size along with
# the digest in every message where digests are embedded). This does mean that
# the API leaks some implementation details of (what we consider to be) a
# reasonable server implementation, but we consider this to be a worthwhile
# tradeoff. When a `Digest` is used to refer to a proto message, it always
# refers to the message in binary encoded form. To ensure consistent hashing,
# clients and servers MUST ensure that they serialize messages according to the
# following rules, even if there are alternate valid encodings for the same
# message: * Fields are serialized in tag order. * There are no unknown fields. *
# There are no duplicate fields. * Fields are serialized according to the
# default semantics for their type. Most protocol buffer implementations will
# always follow these rules when serializing, but care should be taken to avoid
# shortcuts. For instance, concatenating two messages to merge them may produce
# duplicate fields.
class BuildBazelRemoteExecutionV2Digest
include Google::Apis::Core::Hashable
# The hash. In the case of SHA-256, it will always be a lowercase hex string
# exactly 64 characters long.
# Corresponds to the JSON property `hash`
# @return [String]
attr_accessor :hash_prop
# The size of the blob, in bytes.
# Corresponds to the JSON property `sizeBytes`
# @return [Fixnum]
attr_accessor :size_bytes
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@hash_prop = args[:hash_prop] if args.key?(:hash_prop)
@size_bytes = args[:size_bytes] if args.key?(:size_bytes)
end
end
# A `Directory` represents a directory node in a file tree, containing zero or
# more children FileNodes, DirectoryNodes and SymlinkNodes. Each `Node` contains
# its name in the directory, either the digest of its content (either a file
# blob or a `Directory` proto) or a symlink target, as well as possibly some
# metadata about the file or directory. In order to ensure that two equivalent
# directory trees hash to the same value, the following restrictions MUST be
# obeyed when constructing a a `Directory`: * Every child in the directory must
# have a path of exactly one segment. Multiple levels of directory hierarchy may
# not be collapsed. * Each child in the directory must have a unique path
# segment (file name). Note that while the API itself is case-sensitive, the
# environment where the Action is executed may or may not be case-sensitive.
# That is, it is legal to call the API with a Directory that has both "Foo" and "
# foo" as children, but the Action may be rejected by the remote system upon
# execution. * The files, directories and symlinks in the directory must each be
# sorted in lexicographical order by path. The path strings must be sorted by
# code point, equivalently, by UTF-8 bytes. * The NodeProperties of files,
# directories, and symlinks must be sorted in lexicographical order by property
# name. A `Directory` that obeys the restrictions is said to be in canonical
# form. As an example, the following could be used for a file named `bar` and a
# directory named `foo` with an executable file named `baz` (hashes shortened
# for readability): ```json // (Directory proto) ` files: [ ` name: "bar",
# digest: ` hash: "4a73bc9d03...", size: 65534 `, node_properties: [ ` "name": "
# MTime", "value": "2017-01-15T01:30:15.01Z" ` ] ` ], directories: [ ` name: "
# foo", digest: ` hash: "4cf2eda940...", size: 43 ` ` ] ` // (Directory proto
# with hash "4cf2eda940..." and size 43) ` files: [ ` name: "baz", digest: `
# hash: "b2c941073e...", size: 1294, `, is_executable: true ` ] ` ```
class BuildBazelRemoteExecutionV2Directory
include Google::Apis::Core::Hashable
# The subdirectories in the directory.
# Corresponds to the JSON property `directories`
# @return [Array<Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2DirectoryNode>]
attr_accessor :directories
# The files in the directory.
# Corresponds to the JSON property `files`
# @return [Array<Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2FileNode>]
attr_accessor :files
# The node properties of the Directory.
# Corresponds to the JSON property `nodeProperties`
# @return [Array<Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2NodeProperty>]
attr_accessor :node_properties
# The symlinks in the directory.
# Corresponds to the JSON property `symlinks`
# @return [Array<Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2SymlinkNode>]
attr_accessor :symlinks
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@directories = args[:directories] if args.key?(:directories)
@files = args[:files] if args.key?(:files)
@node_properties = args[:node_properties] if args.key?(:node_properties)
@symlinks = args[:symlinks] if args.key?(:symlinks)
end
end
# A `DirectoryNode` represents a child of a Directory which is itself a `
# Directory` and its associated metadata.
class BuildBazelRemoteExecutionV2DirectoryNode
include Google::Apis::Core::Hashable
# A content digest. A digest for a given blob consists of the size of the blob
# and its hash. The hash algorithm to use is defined by the server. The size is
# considered to be an integral part of the digest and cannot be separated. That
# is, even if the `hash` field is correctly specified but `size_bytes` is not,
# the server MUST reject the request. The reason for including the size in the
# digest is as follows: in a great many cases, the server needs to know the size
# of the blob it is about to work with prior to starting an operation with it,
# such as flattening Merkle tree structures or streaming it to a worker.
# Technically, the server could implement a separate metadata store, but this
# results in a significantly more complicated implementation as opposed to
# having the client specify the size up-front (or storing the size along with
# the digest in every message where digests are embedded). This does mean that
# the API leaks some implementation details of (what we consider to be) a
# reasonable server implementation, but we consider this to be a worthwhile
# tradeoff. When a `Digest` is used to refer to a proto message, it always
# refers to the message in binary encoded form. To ensure consistent hashing,
# clients and servers MUST ensure that they serialize messages according to the
# following rules, even if there are alternate valid encodings for the same
# message: * Fields are serialized in tag order. * There are no unknown fields. *
# There are no duplicate fields. * Fields are serialized according to the
# default semantics for their type. Most protocol buffer implementations will
# always follow these rules when serializing, but care should be taken to avoid
# shortcuts. For instance, concatenating two messages to merge them may produce
# duplicate fields.
# Corresponds to the JSON property `digest`
# @return [Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2Digest]
attr_accessor :digest
# The name of the directory.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@digest = args[:digest] if args.key?(:digest)
@name = args[:name] if args.key?(:name)
end
end
# Metadata about an ongoing execution, which will be contained in the metadata
# field of the Operation.
class BuildBazelRemoteExecutionV2ExecuteOperationMetadata
include Google::Apis::Core::Hashable
# A content digest. A digest for a given blob consists of the size of the blob
# and its hash. The hash algorithm to use is defined by the server. The size is
# considered to be an integral part of the digest and cannot be separated. That
# is, even if the `hash` field is correctly specified but `size_bytes` is not,
# the server MUST reject the request. The reason for including the size in the
# digest is as follows: in a great many cases, the server needs to know the size
# of the blob it is about to work with prior to starting an operation with it,
# such as flattening Merkle tree structures or streaming it to a worker.
# Technically, the server could implement a separate metadata store, but this
# results in a significantly more complicated implementation as opposed to
# having the client specify the size up-front (or storing the size along with
# the digest in every message where digests are embedded). This does mean that
# the API leaks some implementation details of (what we consider to be) a
# reasonable server implementation, but we consider this to be a worthwhile
# tradeoff. When a `Digest` is used to refer to a proto message, it always
# refers to the message in binary encoded form. To ensure consistent hashing,
# clients and servers MUST ensure that they serialize messages according to the
# following rules, even if there are alternate valid encodings for the same
# message: * Fields are serialized in tag order. * There are no unknown fields. *
# There are no duplicate fields. * Fields are serialized according to the
# default semantics for their type. Most protocol buffer implementations will
# always follow these rules when serializing, but care should be taken to avoid
# shortcuts. For instance, concatenating two messages to merge them may produce
# duplicate fields.
# Corresponds to the JSON property `actionDigest`
# @return [Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2Digest]
attr_accessor :action_digest
# The current stage of execution.
# Corresponds to the JSON property `stage`
# @return [String]
attr_accessor :stage
# If set, the client can use this name with ByteStream.Read to stream the
# standard error.
# Corresponds to the JSON property `stderrStreamName`
# @return [String]
attr_accessor :stderr_stream_name
# If set, the client can use this name with ByteStream.Read to stream the
# standard output.
# Corresponds to the JSON property `stdoutStreamName`
# @return [String]
attr_accessor :stdout_stream_name
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@action_digest = args[:action_digest] if args.key?(:action_digest)
@stage = args[:stage] if args.key?(:stage)
@stderr_stream_name = args[:stderr_stream_name] if args.key?(:stderr_stream_name)
@stdout_stream_name = args[:stdout_stream_name] if args.key?(:stdout_stream_name)
end
end
# A request message for Execution.Execute.
class BuildBazelRemoteExecutionV2ExecuteRequest
include Google::Apis::Core::Hashable
# A content digest. A digest for a given blob consists of the size of the blob
# and its hash. The hash algorithm to use is defined by the server. The size is
# considered to be an integral part of the digest and cannot be separated. That
# is, even if the `hash` field is correctly specified but `size_bytes` is not,
# the server MUST reject the request. The reason for including the size in the
# digest is as follows: in a great many cases, the server needs to know the size
# of the blob it is about to work with prior to starting an operation with it,
# such as flattening Merkle tree structures or streaming it to a worker.
# Technically, the server could implement a separate metadata store, but this
# results in a significantly more complicated implementation as opposed to
# having the client specify the size up-front (or storing the size along with
# the digest in every message where digests are embedded). This does mean that
# the API leaks some implementation details of (what we consider to be) a
# reasonable server implementation, but we consider this to be a worthwhile
# tradeoff. When a `Digest` is used to refer to a proto message, it always
# refers to the message in binary encoded form. To ensure consistent hashing,
# clients and servers MUST ensure that they serialize messages according to the
# following rules, even if there are alternate valid encodings for the same
# message: * Fields are serialized in tag order. * There are no unknown fields. *
# There are no duplicate fields. * Fields are serialized according to the
# default semantics for their type. Most protocol buffer implementations will
# always follow these rules when serializing, but care should be taken to avoid
# shortcuts. For instance, concatenating two messages to merge them may produce
# duplicate fields.
# Corresponds to the JSON property `actionDigest`
# @return [Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2Digest]
attr_accessor :action_digest
# An `ExecutionPolicy` can be used to control the scheduling of the action.
# Corresponds to the JSON property `executionPolicy`
# @return [Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2ExecutionPolicy]
attr_accessor :execution_policy
# A `ResultsCachePolicy` is used for fine-grained control over how action
# outputs are stored in the CAS and Action Cache.
# Corresponds to the JSON property `resultsCachePolicy`
# @return [Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2ResultsCachePolicy]
attr_accessor :results_cache_policy
# If true, the action will be executed even if its result is already present in
# the ActionCache. The execution is still allowed to be merged with other in-
# flight executions of the same action, however - semantically, the service MUST
# only guarantee that the results of an execution with this field set were not
# visible before the corresponding execution request was sent. Note that actions
# from execution requests setting this field set are still eligible to be
# entered into the action cache upon completion, and services SHOULD overwrite
# any existing entries that may exist. This allows skip_cache_lookup requests to
# be used as a mechanism for replacing action cache entries that reference
# outputs no longer available or that are poisoned in any way. If false, the
# result may be served from the action cache.
# Corresponds to the JSON property `skipCacheLookup`
# @return [Boolean]
attr_accessor :skip_cache_lookup
alias_method :skip_cache_lookup?, :skip_cache_lookup
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@action_digest = args[:action_digest] if args.key?(:action_digest)
@execution_policy = args[:execution_policy] if args.key?(:execution_policy)
@results_cache_policy = args[:results_cache_policy] if args.key?(:results_cache_policy)
@skip_cache_lookup = args[:skip_cache_lookup] if args.key?(:skip_cache_lookup)
end
end
# The response message for Execution.Execute, which will be contained in the
# response field of the Operation.
class BuildBazelRemoteExecutionV2ExecuteResponse
include Google::Apis::Core::Hashable
# True if the result was served from cache, false if it was executed.
# Corresponds to the JSON property `cachedResult`
# @return [Boolean]
attr_accessor :cached_result
alias_method :cached_result?, :cached_result
# Freeform informational message with details on the execution of the action
# that may be displayed to the user upon failure or when requested explicitly.
# Corresponds to the JSON property `message`
# @return [String]
attr_accessor :message
# An ActionResult represents the result of an Action being run.
# Corresponds to the JSON property `result`
# @return [Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2ActionResult]
attr_accessor :result
# An optional list of additional log outputs the server wishes to provide. A
# server can use this to return execution-specific logs however it wishes. This
# is intended primarily to make it easier for users to debug issues that may be
# outside of the actual job execution, such as by identifying the worker
# executing the action or by providing logs from the worker's setup phase. The
# keys SHOULD be human readable so that a client can display them to a user.
# Corresponds to the JSON property `serverLogs`
# @return [Hash<String,Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2LogFile>]
attr_accessor :server_logs
# The `Status` type defines a logical error model that is suitable for different
# programming environments, including REST APIs and RPC APIs. It is used by [
# gRPC](https://github.com/grpc). Each `Status` message contains three pieces of
# data: error code, error message, and error details. You can find out more
# about this error model and how to work with it in the [API Design Guide](https:
# //cloud.google.com/apis/design/errors).
# Corresponds to the JSON property `status`
# @return [Google::Apis::RemotebuildexecutionV2::GoogleRpcStatus]
attr_accessor :status
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@cached_result = args[:cached_result] if args.key?(:cached_result)
@message = args[:message] if args.key?(:message)
@result = args[:result] if args.key?(:result)
@server_logs = args[:server_logs] if args.key?(:server_logs)
@status = args[:status] if args.key?(:status)
end
end
# ExecutedActionMetadata contains details about a completed execution.
class BuildBazelRemoteExecutionV2ExecutedActionMetadata
include Google::Apis::Core::Hashable
# When the worker completed executing the action command.
# Corresponds to the JSON property `executionCompletedTimestamp`
# @return [String]
attr_accessor :execution_completed_timestamp
# When the worker started executing the action command.
# Corresponds to the JSON property `executionStartTimestamp`
# @return [String]
attr_accessor :execution_start_timestamp
# When the worker finished fetching action inputs.
# Corresponds to the JSON property `inputFetchCompletedTimestamp`
# @return [String]
attr_accessor :input_fetch_completed_timestamp
# When the worker started fetching action inputs.
# Corresponds to the JSON property `inputFetchStartTimestamp`
# @return [String]
attr_accessor :input_fetch_start_timestamp
# When the worker finished uploading action outputs.
# Corresponds to the JSON property `outputUploadCompletedTimestamp`
# @return [String]
attr_accessor :output_upload_completed_timestamp
# When the worker started uploading action outputs.
# Corresponds to the JSON property `outputUploadStartTimestamp`
# @return [String]
attr_accessor :output_upload_start_timestamp
# When was the action added to the queue.
# Corresponds to the JSON property `queuedTimestamp`
# @return [String]
attr_accessor :queued_timestamp
# The name of the worker which ran the execution.
# Corresponds to the JSON property `worker`
# @return [String]
attr_accessor :worker
# When the worker completed the action, including all stages.
# Corresponds to the JSON property `workerCompletedTimestamp`
# @return [String]
attr_accessor :worker_completed_timestamp
# When the worker received the action.
# Corresponds to the JSON property `workerStartTimestamp`
# @return [String]
attr_accessor :worker_start_timestamp
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@execution_completed_timestamp = args[:execution_completed_timestamp] if args.key?(:execution_completed_timestamp)
@execution_start_timestamp = args[:execution_start_timestamp] if args.key?(:execution_start_timestamp)
@input_fetch_completed_timestamp = args[:input_fetch_completed_timestamp] if args.key?(:input_fetch_completed_timestamp)
@input_fetch_start_timestamp = args[:input_fetch_start_timestamp] if args.key?(:input_fetch_start_timestamp)
@output_upload_completed_timestamp = args[:output_upload_completed_timestamp] if args.key?(:output_upload_completed_timestamp)
@output_upload_start_timestamp = args[:output_upload_start_timestamp] if args.key?(:output_upload_start_timestamp)
@queued_timestamp = args[:queued_timestamp] if args.key?(:queued_timestamp)
@worker = args[:worker] if args.key?(:worker)
@worker_completed_timestamp = args[:worker_completed_timestamp] if args.key?(:worker_completed_timestamp)
@worker_start_timestamp = args[:worker_start_timestamp] if args.key?(:worker_start_timestamp)
end
end
# Capabilities of the remote execution system.
class BuildBazelRemoteExecutionV2ExecutionCapabilities
include Google::Apis::Core::Hashable
# Remote execution may only support a single digest function.
# Corresponds to the JSON property `digestFunction`
# @return [String]
attr_accessor :digest_function
# Whether remote execution is enabled for the particular server/instance.
# Corresponds to the JSON property `execEnabled`
# @return [Boolean]
attr_accessor :exec_enabled
alias_method :exec_enabled?, :exec_enabled
# Allowed values for priority in ResultsCachePolicy Used for querying both cache
# and execution valid priority ranges.
# Corresponds to the JSON property `executionPriorityCapabilities`
# @return [Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2PriorityCapabilities]
attr_accessor :execution_priority_capabilities
# Supported node properties.
# Corresponds to the JSON property `supportedNodeProperties`
# @return [Array<String>]
attr_accessor :supported_node_properties
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@digest_function = args[:digest_function] if args.key?(:digest_function)
@exec_enabled = args[:exec_enabled] if args.key?(:exec_enabled)
@execution_priority_capabilities = args[:execution_priority_capabilities] if args.key?(:execution_priority_capabilities)
@supported_node_properties = args[:supported_node_properties] if args.key?(:supported_node_properties)
end
end
# An `ExecutionPolicy` can be used to control the scheduling of the action.
class BuildBazelRemoteExecutionV2ExecutionPolicy
include Google::Apis::Core::Hashable
# The priority (relative importance) of this action. Generally, a lower value
# means that the action should be run sooner than actions having a greater
# priority value, but the interpretation of a given value is server- dependent.
# A priority of 0 means the *default* priority. Priorities may be positive or
# negative, and such actions should run later or sooner than actions having the
# default priority, respectively. The particular semantics of this field is up
# to the server. In particular, every server will have their own supported range
# of priorities, and will decide how these map into scheduling policy.
# Corresponds to the JSON property `priority`
# @return [Fixnum]
attr_accessor :priority
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@priority = args[:priority] if args.key?(:priority)
end
end
# A `FileNode` represents a single file and associated metadata.
class BuildBazelRemoteExecutionV2FileNode
include Google::Apis::Core::Hashable
# A content digest. A digest for a given blob consists of the size of the blob
# and its hash. The hash algorithm to use is defined by the server. The size is
# considered to be an integral part of the digest and cannot be separated. That
# is, even if the `hash` field is correctly specified but `size_bytes` is not,
# the server MUST reject the request. The reason for including the size in the
# digest is as follows: in a great many cases, the server needs to know the size
# of the blob it is about to work with prior to starting an operation with it,
# such as flattening Merkle tree structures or streaming it to a worker.
# Technically, the server could implement a separate metadata store, but this
# results in a significantly more complicated implementation as opposed to
# having the client specify the size up-front (or storing the size along with
# the digest in every message where digests are embedded). This does mean that
# the API leaks some implementation details of (what we consider to be) a
# reasonable server implementation, but we consider this to be a worthwhile
# tradeoff. When a `Digest` is used to refer to a proto message, it always
# refers to the message in binary encoded form. To ensure consistent hashing,
# clients and servers MUST ensure that they serialize messages according to the
# following rules, even if there are alternate valid encodings for the same
# message: * Fields are serialized in tag order. * There are no unknown fields. *
# There are no duplicate fields. * Fields are serialized according to the
# default semantics for their type. Most protocol buffer implementations will
# always follow these rules when serializing, but care should be taken to avoid
# shortcuts. For instance, concatenating two messages to merge them may produce
# duplicate fields.
# Corresponds to the JSON property `digest`
# @return [Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2Digest]
attr_accessor :digest
# True if file is executable, false otherwise.
# Corresponds to the JSON property `isExecutable`
# @return [Boolean]
attr_accessor :is_executable
alias_method :is_executable?, :is_executable
# The name of the file.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# The node properties of the FileNode.
# Corresponds to the JSON property `nodeProperties`
# @return [Array<Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2NodeProperty>]
attr_accessor :node_properties
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@digest = args[:digest] if args.key?(:digest)
@is_executable = args[:is_executable] if args.key?(:is_executable)
@name = args[:name] if args.key?(:name)
@node_properties = args[:node_properties] if args.key?(:node_properties)
end
end
# A request message for ContentAddressableStorage.FindMissingBlobs.
class BuildBazelRemoteExecutionV2FindMissingBlobsRequest
include Google::Apis::Core::Hashable
# A list of the blobs to check.
# Corresponds to the JSON property `blobDigests`
# @return [Array<Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2Digest>]
attr_accessor :blob_digests
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@blob_digests = args[:blob_digests] if args.key?(:blob_digests)
end
end
# A response message for ContentAddressableStorage.FindMissingBlobs.
class BuildBazelRemoteExecutionV2FindMissingBlobsResponse
include Google::Apis::Core::Hashable
# A list of the blobs requested *not* present in the storage.
# Corresponds to the JSON property `missingBlobDigests`
# @return [Array<Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2Digest>]
attr_accessor :missing_blob_digests
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@missing_blob_digests = args[:missing_blob_digests] if args.key?(:missing_blob_digests)
end
end
# A response message for ContentAddressableStorage.GetTree.
class BuildBazelRemoteExecutionV2GetTreeResponse
include Google::Apis::Core::Hashable
# The directories descended from the requested root.
# Corresponds to the JSON property `directories`
# @return [Array<Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2Directory>]
attr_accessor :directories
# If present, signifies that there are more results which the client can
# retrieve by passing this as the page_token in a subsequent request. If empty,
# signifies that this is the last page of results.
# Corresponds to the JSON property `nextPageToken`
# @return [String]
attr_accessor :next_page_token
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@directories = args[:directories] if args.key?(:directories)
@next_page_token = args[:next_page_token] if args.key?(:next_page_token)
end
end
# A `LogFile` is a log stored in the CAS.
class BuildBazelRemoteExecutionV2LogFile
include Google::Apis::Core::Hashable
# A content digest. A digest for a given blob consists of the size of the blob
# and its hash. The hash algorithm to use is defined by the server. The size is
# considered to be an integral part of the digest and cannot be separated. That
# is, even if the `hash` field is correctly specified but `size_bytes` is not,
# the server MUST reject the request. The reason for including the size in the
# digest is as follows: in a great many cases, the server needs to know the size
# of the blob it is about to work with prior to starting an operation with it,
# such as flattening Merkle tree structures or streaming it to a worker.
# Technically, the server could implement a separate metadata store, but this
# results in a significantly more complicated implementation as opposed to
# having the client specify the size up-front (or storing the size along with
# the digest in every message where digests are embedded). This does mean that
# the API leaks some implementation details of (what we consider to be) a
# reasonable server implementation, but we consider this to be a worthwhile
# tradeoff. When a `Digest` is used to refer to a proto message, it always
# refers to the message in binary encoded form. To ensure consistent hashing,
# clients and servers MUST ensure that they serialize messages according to the
# following rules, even if there are alternate valid encodings for the same
# message: * Fields are serialized in tag order. * There are no unknown fields. *
# There are no duplicate fields. * Fields are serialized according to the
# default semantics for their type. Most protocol buffer implementations will
# always follow these rules when serializing, but care should be taken to avoid
# shortcuts. For instance, concatenating two messages to merge them may produce
# duplicate fields.
# Corresponds to the JSON property `digest`
# @return [Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2Digest]
attr_accessor :digest
# This is a hint as to the purpose of the log, and is set to true if the log is
# human-readable text that can be usefully displayed to a user, and false
# otherwise. For instance, if a command-line client wishes to print the server
# logs to the terminal for a failed action, this allows it to avoid displaying a
# binary file.
# Corresponds to the JSON property `humanReadable`
# @return [Boolean]
attr_accessor :human_readable
alias_method :human_readable?, :human_readable
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@digest = args[:digest] if args.key?(:digest)
@human_readable = args[:human_readable] if args.key?(:human_readable)
end
end
# A single property for FileNodes, DirectoryNodes, and SymlinkNodes. The server
# is responsible for specifying the property `name`s that it accepts. If
# permitted by the server, the same `name` may occur multiple times.
class BuildBazelRemoteExecutionV2NodeProperty
include Google::Apis::Core::Hashable
# The property name.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# The property value.
# Corresponds to the JSON property `value`
# @return [String]
attr_accessor :value
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@name = args[:name] if args.key?(:name)
@value = args[:value] if args.key?(:value)
end
end
# An `OutputDirectory` is the output in an `ActionResult` corresponding to a
# directory's full contents rather than a single file.
class BuildBazelRemoteExecutionV2OutputDirectory
include Google::Apis::Core::Hashable
# The full path of the directory relative to the working directory. The path
# separator is a forward slash `/`. Since this is a relative path, it MUST NOT
# begin with a leading forward slash. The empty string value is allowed, and it
# denotes the entire working directory.
# Corresponds to the JSON property `path`
# @return [String]
attr_accessor :path
# A content digest. A digest for a given blob consists of the size of the blob
# and its hash. The hash algorithm to use is defined by the server. The size is
# considered to be an integral part of the digest and cannot be separated. That
# is, even if the `hash` field is correctly specified but `size_bytes` is not,
# the server MUST reject the request. The reason for including the size in the
# digest is as follows: in a great many cases, the server needs to know the size
# of the blob it is about to work with prior to starting an operation with it,
# such as flattening Merkle tree structures or streaming it to a worker.
# Technically, the server could implement a separate metadata store, but this
# results in a significantly more complicated implementation as opposed to
# having the client specify the size up-front (or storing the size along with
# the digest in every message where digests are embedded). This does mean that
# the API leaks some implementation details of (what we consider to be) a
# reasonable server implementation, but we consider this to be a worthwhile
# tradeoff. When a `Digest` is used to refer to a proto message, it always
# refers to the message in binary encoded form. To ensure consistent hashing,
# clients and servers MUST ensure that they serialize messages according to the
# following rules, even if there are alternate valid encodings for the same
# message: * Fields are serialized in tag order. * There are no unknown fields. *
# There are no duplicate fields. * Fields are serialized according to the
# default semantics for their type. Most protocol buffer implementations will
# always follow these rules when serializing, but care should be taken to avoid
# shortcuts. For instance, concatenating two messages to merge them may produce
# duplicate fields.
# Corresponds to the JSON property `treeDigest`
# @return [Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2Digest]
attr_accessor :tree_digest
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@path = args[:path] if args.key?(:path)
@tree_digest = args[:tree_digest] if args.key?(:tree_digest)
end
end
# An `OutputFile` is similar to a FileNode, but it is used as an output in an `
# ActionResult`. It allows a full file path rather than only a name.
class BuildBazelRemoteExecutionV2OutputFile
include Google::Apis::Core::Hashable
# The contents of the file if inlining was requested. The server SHOULD NOT
# inline file contents unless requested by the client in the
# GetActionResultRequest message. The server MAY omit inlining, even if
# requested, and MUST do so if inlining would cause the response to exceed
# message size limits.
# Corresponds to the JSON property `contents`
# NOTE: Values are automatically base64 encoded/decoded in the client library.
# @return [String]
attr_accessor :contents
# A content digest. A digest for a given blob consists of the size of the blob
# and its hash. The hash algorithm to use is defined by the server. The size is
# considered to be an integral part of the digest and cannot be separated. That
# is, even if the `hash` field is correctly specified but `size_bytes` is not,
# the server MUST reject the request. The reason for including the size in the
# digest is as follows: in a great many cases, the server needs to know the size
# of the blob it is about to work with prior to starting an operation with it,
# such as flattening Merkle tree structures or streaming it to a worker.
# Technically, the server could implement a separate metadata store, but this
# results in a significantly more complicated implementation as opposed to
# having the client specify the size up-front (or storing the size along with
# the digest in every message where digests are embedded). This does mean that
# the API leaks some implementation details of (what we consider to be) a
# reasonable server implementation, but we consider this to be a worthwhile
# tradeoff. When a `Digest` is used to refer to a proto message, it always
# refers to the message in binary encoded form. To ensure consistent hashing,
# clients and servers MUST ensure that they serialize messages according to the
# following rules, even if there are alternate valid encodings for the same
# message: * Fields are serialized in tag order. * There are no unknown fields. *
# There are no duplicate fields. * Fields are serialized according to the
# default semantics for their type. Most protocol buffer implementations will
# always follow these rules when serializing, but care should be taken to avoid
# shortcuts. For instance, concatenating two messages to merge them may produce
# duplicate fields.
# Corresponds to the JSON property `digest`
# @return [Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2Digest]
attr_accessor :digest
# True if file is executable, false otherwise.
# Corresponds to the JSON property `isExecutable`
# @return [Boolean]
attr_accessor :is_executable
alias_method :is_executable?, :is_executable
# The supported node properties of the OutputFile, if requested by the Action.
# Corresponds to the JSON property `nodeProperties`
# @return [Array<Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2NodeProperty>]
attr_accessor :node_properties
# The full path of the file relative to the working directory, including the
# filename. The path separator is a forward slash `/`. Since this is a relative
# path, it MUST NOT begin with a leading forward slash.
# Corresponds to the JSON property `path`
# @return [String]
attr_accessor :path
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@contents = args[:contents] if args.key?(:contents)
@digest = args[:digest] if args.key?(:digest)
@is_executable = args[:is_executable] if args.key?(:is_executable)
@node_properties = args[:node_properties] if args.key?(:node_properties)
@path = args[:path] if args.key?(:path)
end
end
# An `OutputSymlink` is similar to a Symlink, but it is used as an output in an `
# ActionResult`. `OutputSymlink` is binary-compatible with `SymlinkNode`.
class BuildBazelRemoteExecutionV2OutputSymlink
include Google::Apis::Core::Hashable
# The supported node properties of the OutputSymlink, if requested by the Action.
# Corresponds to the JSON property `nodeProperties`
# @return [Array<Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2NodeProperty>]
attr_accessor :node_properties
# The full path of the symlink relative to the working directory, including the
# filename. The path separator is a forward slash `/`. Since this is a relative
# path, it MUST NOT begin with a leading forward slash.
# Corresponds to the JSON property `path`
# @return [String]
attr_accessor :path
# The target path of the symlink. The path separator is a forward slash `/`. The
# target path can be relative to the parent directory of the symlink or it can
# be an absolute path starting with `/`. Support for absolute paths can be
# checked using the Capabilities API. The canonical form forbids the substrings `
# /./` and `//` in the target path. `..` components are allowed anywhere in the
# target path.
# Corresponds to the JSON property `target`
# @return [String]
attr_accessor :target
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@node_properties = args[:node_properties] if args.key?(:node_properties)
@path = args[:path] if args.key?(:path)
@target = args[:target] if args.key?(:target)
end
end
# A `Platform` is a set of requirements, such as hardware, operating system, or
# compiler toolchain, for an Action's execution environment. A `Platform` is
# represented as a series of key-value pairs representing the properties that
# are required of the platform.
class BuildBazelRemoteExecutionV2Platform
include Google::Apis::Core::Hashable
# The properties that make up this platform. In order to ensure that equivalent `
# Platform`s always hash to the same value, the properties MUST be
# lexicographically sorted by name, and then by value. Sorting of strings is
# done by code point, equivalently, by the UTF-8 bytes.
# Corresponds to the JSON property `properties`
# @return [Array<Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2PlatformProperty>]
attr_accessor :properties
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@properties = args[:properties] if args.key?(:properties)
end
end
# A single property for the environment. The server is responsible for
# specifying the property `name`s that it accepts. If an unknown `name` is
# provided in the requirements for an Action, the server SHOULD reject the
# execution request. If permitted by the server, the same `name` may occur
# multiple times. The server is also responsible for specifying the
# interpretation of property `value`s. For instance, a property describing how
# much RAM must be available may be interpreted as allowing a worker with 16GB
# to fulfill a request for 8GB, while a property describing the OS environment
# on which the action must be performed may require an exact match with the
# worker's OS. The server MAY use the `value` of one or more properties to
# determine how it sets up the execution environment, such as by making specific
# system files available to the worker.
class BuildBazelRemoteExecutionV2PlatformProperty
include Google::Apis::Core::Hashable
# The property name.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# The property value.
# Corresponds to the JSON property `value`
# @return [String]
attr_accessor :value
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@name = args[:name] if args.key?(:name)
@value = args[:value] if args.key?(:value)
end
end
# Allowed values for priority in ResultsCachePolicy Used for querying both cache
# and execution valid priority ranges.
class BuildBazelRemoteExecutionV2PriorityCapabilities
include Google::Apis::Core::Hashable
#
# Corresponds to the JSON property `priorities`
# @return [Array<Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2PriorityCapabilitiesPriorityRange>]
attr_accessor :priorities
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@priorities = args[:priorities] if args.key?(:priorities)
end
end
# Supported range of priorities, including boundaries.
class BuildBazelRemoteExecutionV2PriorityCapabilitiesPriorityRange
include Google::Apis::Core::Hashable
#
# Corresponds to the JSON property `maxPriority`
# @return [Fixnum]
attr_accessor :max_priority
#
# Corresponds to the JSON property `minPriority`
# @return [Fixnum]
attr_accessor :min_priority
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@max_priority = args[:max_priority] if args.key?(:max_priority)
@min_priority = args[:min_priority] if args.key?(:min_priority)
end
end
# An optional Metadata to attach to any RPC request to tell the server about an
# external context of the request. The server may use this for logging or other
# purposes. To use it, the client attaches the header to the call using the
# canonical proto serialization: * name: `build.bazel.remote.execution.v2.
# requestmetadata-bin` * contents: the base64 encoded binary `RequestMetadata`
# message. Note: the gRPC library serializes binary headers encoded in base 64
# by default (https://github.com/grpc/grpc/blob/master/doc/PROTOCOL-HTTP2.md#
# requests). Therefore, if the gRPC library is used to pass/retrieve this
# metadata, the user may ignore the base64 encoding and assume it is simply
# serialized as a binary message.
class BuildBazelRemoteExecutionV2RequestMetadata
include Google::Apis::Core::Hashable
# An identifier that ties multiple requests to the same action. For example,
# multiple requests to the CAS, Action Cache, and Execution API are used in
# order to compile foo.cc.
# Corresponds to the JSON property `actionId`
# @return [String]
attr_accessor :action_id
# An identifier to tie multiple tool invocations together. For example, runs of
# foo_test, bar_test and baz_test on a post-submit of a given patch.
# Corresponds to the JSON property `correlatedInvocationsId`
# @return [String]
attr_accessor :correlated_invocations_id
# Details for the tool used to call the API.
# Corresponds to the JSON property `toolDetails`
# @return [Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2ToolDetails]
attr_accessor :tool_details
# An identifier that ties multiple actions together to a final result. For
# example, multiple actions are required to build and run foo_test.
# Corresponds to the JSON property `toolInvocationId`
# @return [String]
attr_accessor :tool_invocation_id
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@action_id = args[:action_id] if args.key?(:action_id)
@correlated_invocations_id = args[:correlated_invocations_id] if args.key?(:correlated_invocations_id)
@tool_details = args[:tool_details] if args.key?(:tool_details)
@tool_invocation_id = args[:tool_invocation_id] if args.key?(:tool_invocation_id)
end
end
# A `ResultsCachePolicy` is used for fine-grained control over how action
# outputs are stored in the CAS and Action Cache.
class BuildBazelRemoteExecutionV2ResultsCachePolicy
include Google::Apis::Core::Hashable
# The priority (relative importance) of this content in the overall cache.
# Generally, a lower value means a longer retention time or other advantage, but
# the interpretation of a given value is server-dependent. A priority of 0 means
# a *default* value, decided by the server. The particular semantics of this
# field is up to the server. In particular, every server will have their own
# supported range of priorities, and will decide how these map into retention/
# eviction policy.
# Corresponds to the JSON property `priority`
# @return [Fixnum]
attr_accessor :priority
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@priority = args[:priority] if args.key?(:priority)
end
end
# A response message for Capabilities.GetCapabilities.
class BuildBazelRemoteExecutionV2ServerCapabilities
include Google::Apis::Core::Hashable
# Capabilities of the remote cache system.
# Corresponds to the JSON property `cacheCapabilities`
# @return [Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2CacheCapabilities]
attr_accessor :cache_capabilities
# The full version of a given tool.
# Corresponds to the JSON property `deprecatedApiVersion`
# @return [Google::Apis::RemotebuildexecutionV2::BuildBazelSemverSemVer]
attr_accessor :deprecated_api_version
# Capabilities of the remote execution system.
# Corresponds to the JSON property `executionCapabilities`
# @return [Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2ExecutionCapabilities]
attr_accessor :execution_capabilities
# The full version of a given tool.
# Corresponds to the JSON property `highApiVersion`
# @return [Google::Apis::RemotebuildexecutionV2::BuildBazelSemverSemVer]
attr_accessor :high_api_version
# The full version of a given tool.
# Corresponds to the JSON property `lowApiVersion`
# @return [Google::Apis::RemotebuildexecutionV2::BuildBazelSemverSemVer]
attr_accessor :low_api_version
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@cache_capabilities = args[:cache_capabilities] if args.key?(:cache_capabilities)
@deprecated_api_version = args[:deprecated_api_version] if args.key?(:deprecated_api_version)
@execution_capabilities = args[:execution_capabilities] if args.key?(:execution_capabilities)
@high_api_version = args[:high_api_version] if args.key?(:high_api_version)
@low_api_version = args[:low_api_version] if args.key?(:low_api_version)
end
end
# A `SymlinkNode` represents a symbolic link.
class BuildBazelRemoteExecutionV2SymlinkNode
include Google::Apis::Core::Hashable
# The name of the symlink.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# The node properties of the SymlinkNode.
# Corresponds to the JSON property `nodeProperties`
# @return [Array<Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2NodeProperty>]
attr_accessor :node_properties
# The target path of the symlink. The path separator is a forward slash `/`. The
# target path can be relative to the parent directory of the symlink or it can
# be an absolute path starting with `/`. Support for absolute paths can be
# checked using the Capabilities API. The canonical form forbids the substrings `
# /./` and `//` in the target path. `..` components are allowed anywhere in the
# target path.
# Corresponds to the JSON property `target`
# @return [String]
attr_accessor :target
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@name = args[:name] if args.key?(:name)
@node_properties = args[:node_properties] if args.key?(:node_properties)
@target = args[:target] if args.key?(:target)
end
end
# Details for the tool used to call the API.
class BuildBazelRemoteExecutionV2ToolDetails
include Google::Apis::Core::Hashable
# Name of the tool, e.g. bazel.
# Corresponds to the JSON property `toolName`
# @return [String]
attr_accessor :tool_name
# Version of the tool used for the request, e.g. 5.0.3.
# Corresponds to the JSON property `toolVersion`
# @return [String]
attr_accessor :tool_version
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@tool_name = args[:tool_name] if args.key?(:tool_name)
@tool_version = args[:tool_version] if args.key?(:tool_version)
end
end
# A `Tree` contains all the Directory protos in a single directory Merkle tree,
# compressed into one message.
class BuildBazelRemoteExecutionV2Tree
include Google::Apis::Core::Hashable
# All the child directories: the directories referred to by the root and,
# recursively, all its children. In order to reconstruct the directory tree, the
# client must take the digests of each of the child directories and then build
# up a tree starting from the `root`.
# Corresponds to the JSON property `children`
# @return [Array<Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2Directory>]
attr_accessor :children
# A `Directory` represents a directory node in a file tree, containing zero or
# more children FileNodes, DirectoryNodes and SymlinkNodes. Each `Node` contains
# its name in the directory, either the digest of its content (either a file
# blob or a `Directory` proto) or a symlink target, as well as possibly some
# metadata about the file or directory. In order to ensure that two equivalent
# directory trees hash to the same value, the following restrictions MUST be
# obeyed when constructing a a `Directory`: * Every child in the directory must
# have a path of exactly one segment. Multiple levels of directory hierarchy may
# not be collapsed. * Each child in the directory must have a unique path
# segment (file name). Note that while the API itself is case-sensitive, the
# environment where the Action is executed may or may not be case-sensitive.
# That is, it is legal to call the API with a Directory that has both "Foo" and "
# foo" as children, but the Action may be rejected by the remote system upon
# execution. * The files, directories and symlinks in the directory must each be
# sorted in lexicographical order by path. The path strings must be sorted by
# code point, equivalently, by UTF-8 bytes. * The NodeProperties of files,
# directories, and symlinks must be sorted in lexicographical order by property
# name. A `Directory` that obeys the restrictions is said to be in canonical
# form. As an example, the following could be used for a file named `bar` and a
# directory named `foo` with an executable file named `baz` (hashes shortened
# for readability): ```json // (Directory proto) ` files: [ ` name: "bar",
# digest: ` hash: "4a73bc9d03...", size: 65534 `, node_properties: [ ` "name": "
# MTime", "value": "2017-01-15T01:30:15.01Z" ` ] ` ], directories: [ ` name: "
# foo", digest: ` hash: "4cf2eda940...", size: 43 ` ` ] ` // (Directory proto
# with hash "4cf2eda940..." and size 43) ` files: [ ` name: "baz", digest: `
# hash: "b2c941073e...", size: 1294, `, is_executable: true ` ] ` ```
# Corresponds to the JSON property `root`
# @return [Google::Apis::RemotebuildexecutionV2::BuildBazelRemoteExecutionV2Directory]
attr_accessor :root
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@children = args[:children] if args.key?(:children)
@root = args[:root] if args.key?(:root)
end
end
# A request message for WaitExecution.
class BuildBazelRemoteExecutionV2WaitExecutionRequest
include Google::Apis::Core::Hashable
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
end
end
# The full version of a given tool.
class BuildBazelSemverSemVer
include Google::Apis::Core::Hashable
# The major version, e.g 10 for 10.2.3.
# Corresponds to the JSON property `major`
# @return [Fixnum]
attr_accessor :major
# The minor version, e.g. 2 for 10.2.3.
# Corresponds to the JSON property `minor`
# @return [Fixnum]
attr_accessor :minor
# The patch version, e.g 3 for 10.2.3.
# Corresponds to the JSON property `patch`
# @return [Fixnum]
attr_accessor :patch
# The pre-release version. Either this field or major/minor/patch fields must be
# filled. They are mutually exclusive. Pre-release versions are assumed to be
# earlier than any released versions.
# Corresponds to the JSON property `prerelease`
# @return [String]
attr_accessor :prerelease
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@major = args[:major] if args.key?(:major)
@minor = args[:minor] if args.key?(:minor)
@patch = args[:patch] if args.key?(:patch)
@prerelease = args[:prerelease] if args.key?(:prerelease)
end
end
# CommandDuration contains the various duration metrics tracked when a bot
# performs a command.
class GoogleDevtoolsRemotebuildbotCommandDurations
include Google::Apis::Core::Hashable
# The time spent preparing the command to be run in a Docker container (includes
# pulling the Docker image, if necessary).
# Corresponds to the JSON property `dockerPrep`
# @return [String]
attr_accessor :docker_prep
# The timestamp when docker preparation begins.
# Corresponds to the JSON property `dockerPrepStartTime`
# @return [String]
attr_accessor :docker_prep_start_time
# The time spent downloading the input files and constructing the working
# directory.
# Corresponds to the JSON property `download`
# @return [String]
attr_accessor :download
# The timestamp when downloading the input files begins.
# Corresponds to the JSON property `downloadStartTime`
# @return [String]
attr_accessor :download_start_time
# The timestamp when execution begins.
# Corresponds to the JSON property `execStartTime`
# @return [String]
attr_accessor :exec_start_time
# The time spent executing the command (i.e., doing useful work).
# Corresponds to the JSON property `execution`
# @return [String]
attr_accessor :execution
# The timestamp when preparation is done and bot starts downloading files.
# Corresponds to the JSON property `isoPrepDone`
# @return [String]
attr_accessor :iso_prep_done
# The time spent completing the command, in total.
# Corresponds to the JSON property `overall`
# @return [String]
attr_accessor :overall
# The time spent uploading the stdout logs.
# Corresponds to the JSON property `stdout`
# @return [String]
attr_accessor :stdout
# The time spent uploading the output files.
# Corresponds to the JSON property `upload`
# @return [String]
attr_accessor :upload
# The timestamp when uploading the output files begins.
# Corresponds to the JSON property `uploadStartTime`
# @return [String]
attr_accessor :upload_start_time
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@docker_prep = args[:docker_prep] if args.key?(:docker_prep)
@docker_prep_start_time = args[:docker_prep_start_time] if args.key?(:docker_prep_start_time)
@download = args[:download] if args.key?(:download)
@download_start_time = args[:download_start_time] if args.key?(:download_start_time)
@exec_start_time = args[:exec_start_time] if args.key?(:exec_start_time)
@execution = args[:execution] if args.key?(:execution)
@iso_prep_done = args[:iso_prep_done] if args.key?(:iso_prep_done)
@overall = args[:overall] if args.key?(:overall)
@stdout = args[:stdout] if args.key?(:stdout)
@upload = args[:upload] if args.key?(:upload)
@upload_start_time = args[:upload_start_time] if args.key?(:upload_start_time)
end
end
# CommandEvents contains counters for the number of warnings and errors that
# occurred during the execution of a command.
class GoogleDevtoolsRemotebuildbotCommandEvents
include Google::Apis::Core::Hashable
# Indicates whether we are using a cached Docker image (true) or had to pull the
# Docker image (false) for this command.
# Corresponds to the JSON property `dockerCacheHit`
# @return [Boolean]
attr_accessor :docker_cache_hit
alias_method :docker_cache_hit?, :docker_cache_hit
# The input cache miss ratio.
# Corresponds to the JSON property `inputCacheMiss`
# @return [Float]
attr_accessor :input_cache_miss
# The number of errors reported.
# Corresponds to the JSON property `numErrors`
# @return [Fixnum]
attr_accessor :num_errors
# The number of warnings reported.
# Corresponds to the JSON property `numWarnings`
# @return [Fixnum]
attr_accessor :num_warnings
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@docker_cache_hit = args[:docker_cache_hit] if args.key?(:docker_cache_hit)
@input_cache_miss = args[:input_cache_miss] if args.key?(:input_cache_miss)
@num_errors = args[:num_errors] if args.key?(:num_errors)
@num_warnings = args[:num_warnings] if args.key?(:num_warnings)
end
end
# The internal status of the command result.
class GoogleDevtoolsRemotebuildbotCommandStatus
include Google::Apis::Core::Hashable
# The status code.
# Corresponds to the JSON property `code`
# @return [String]
attr_accessor :code
# The error message.
# Corresponds to the JSON property `message`
# @return [String]
attr_accessor :message
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@code = args[:code] if args.key?(:code)
@message = args[:message] if args.key?(:message)
end
end
# ResourceUsage is the system resource usage of the host machine.
class GoogleDevtoolsRemotebuildbotResourceUsage
include Google::Apis::Core::Hashable
#
# Corresponds to the JSON property `cpuUsedPercent`
# @return [Float]
attr_accessor :cpu_used_percent
#
# Corresponds to the JSON property `diskUsage`
# @return [Google::Apis::RemotebuildexecutionV2::GoogleDevtoolsRemotebuildbotResourceUsageStat]
attr_accessor :disk_usage
#
# Corresponds to the JSON property `memoryUsage`
# @return [Google::Apis::RemotebuildexecutionV2::GoogleDevtoolsRemotebuildbotResourceUsageStat]
attr_accessor :memory_usage
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@cpu_used_percent = args[:cpu_used_percent] if args.key?(:cpu_used_percent)
@disk_usage = args[:disk_usage] if args.key?(:disk_usage)
@memory_usage = args[:memory_usage] if args.key?(:memory_usage)
end
end
#
class GoogleDevtoolsRemotebuildbotResourceUsageStat
include Google::Apis::Core::Hashable
#
# Corresponds to the JSON property `total`
# @return [Fixnum]
attr_accessor :total
#
# Corresponds to the JSON property `used`
# @return [Fixnum]
attr_accessor :used
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@total = args[:total] if args.key?(:total)
@used = args[:used] if args.key?(:used)
end
end
# AcceleratorConfig defines the accelerator cards to attach to the VM.
class GoogleDevtoolsRemotebuildexecutionAdminV1alphaAcceleratorConfig
include Google::Apis::Core::Hashable
# The number of guest accelerator cards exposed to each VM.
# Corresponds to the JSON property `acceleratorCount`
# @return [Fixnum]
attr_accessor :accelerator_count
# The type of accelerator to attach to each VM, e.g. "nvidia-tesla-k80" for
# nVidia Tesla K80.
# Corresponds to the JSON property `acceleratorType`
# @return [String]
attr_accessor :accelerator_type
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@accelerator_count = args[:accelerator_count] if args.key?(:accelerator_count)
@accelerator_type = args[:accelerator_type] if args.key?(:accelerator_type)
end
end
# Autoscale defines the autoscaling policy of a worker pool.
class GoogleDevtoolsRemotebuildexecutionAdminV1alphaAutoscale
include Google::Apis::Core::Hashable
# The maximal number of workers. Must be equal to or greater than min_size.
# Corresponds to the JSON property `maxSize`
# @return [Fixnum]
attr_accessor :max_size
# The minimal number of workers. Must be greater than 0.
# Corresponds to the JSON property `minSize`
# @return [Fixnum]
attr_accessor :min_size
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@max_size = args[:max_size] if args.key?(:max_size)
@min_size = args[:min_size] if args.key?(:min_size)
end
end
# The request used for `CreateInstance`.
class GoogleDevtoolsRemotebuildexecutionAdminV1alphaCreateInstanceRequest
include Google::Apis::Core::Hashable
# Instance conceptually encapsulates all Remote Build Execution resources for
# remote builds. An instance consists of storage and compute resources (for
# example, `ContentAddressableStorage`, `ActionCache`, `WorkerPools`) used for
# running remote builds. All Remote Build Execution API calls are scoped to an
# instance.
# Corresponds to the JSON property `instance`
# @return [Google::Apis::RemotebuildexecutionV2::GoogleDevtoolsRemotebuildexecutionAdminV1alphaInstance]
attr_accessor :instance
# ID of the created instance. A valid `instance_id` must: be 6-50 characters
# long, contain only lowercase letters, digits, hyphens and underscores, start
# with a lowercase letter, and end with a lowercase letter or a digit.
# Corresponds to the JSON property `instanceId`
# @return [String]
attr_accessor :instance_id
# Resource name of the project containing the instance. Format: `projects/[
# PROJECT_ID]`.
# Corresponds to the JSON property `parent`
# @return [String]
attr_accessor :parent
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@instance = args[:instance] if args.key?(:instance)
@instance_id = args[:instance_id] if args.key?(:instance_id)
@parent = args[:parent] if args.key?(:parent)
end
end
# The request used for `CreateWorkerPool`.
class GoogleDevtoolsRemotebuildexecutionAdminV1alphaCreateWorkerPoolRequest
include Google::Apis::Core::Hashable
# Resource name of the instance in which to create the new worker pool. Format: `
# projects/[PROJECT_ID]/instances/[INSTANCE_ID]`.
# Corresponds to the JSON property `parent`
# @return [String]
attr_accessor :parent
# ID of the created worker pool. A valid pool ID must: be 6-50 characters long,
# contain only lowercase letters, digits, hyphens and underscores, start with a
# lowercase letter, and end with a lowercase letter or a digit.
# Corresponds to the JSON property `poolId`
# @return [String]
attr_accessor :pool_id
# A worker pool resource in the Remote Build Execution API.
# Corresponds to the JSON property `workerPool`
# @return [Google::Apis::RemotebuildexecutionV2::GoogleDevtoolsRemotebuildexecutionAdminV1alphaWorkerPool]
attr_accessor :worker_pool
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@parent = args[:parent] if args.key?(:parent)
@pool_id = args[:pool_id] if args.key?(:pool_id)
@worker_pool = args[:worker_pool] if args.key?(:worker_pool)
end
end
# The request used for `DeleteInstance`.
class GoogleDevtoolsRemotebuildexecutionAdminV1alphaDeleteInstanceRequest
include Google::Apis::Core::Hashable
# Name of the instance to delete. Format: `projects/[PROJECT_ID]/instances/[
# INSTANCE_ID]`.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@name = args[:name] if args.key?(:name)
end
end
# The request used for DeleteWorkerPool.
class GoogleDevtoolsRemotebuildexecutionAdminV1alphaDeleteWorkerPoolRequest
include Google::Apis::Core::Hashable
# Name of the worker pool to delete. Format: `projects/[PROJECT_ID]/instances/[
# INSTANCE_ID]/workerpools/[POOL_ID]`.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@name = args[:name] if args.key?(:name)
end
end
# FeaturePolicy defines features allowed to be used on RBE instances, as well as
# instance-wide behavior changes that take effect without opt-in or opt-out at
# usage time.
class GoogleDevtoolsRemotebuildexecutionAdminV1alphaFeaturePolicy
include Google::Apis::Core::Hashable
# Defines whether a feature can be used or what values are accepted.
# Corresponds to the JSON property `containerImageSources`
# @return [Google::Apis::RemotebuildexecutionV2::GoogleDevtoolsRemotebuildexecutionAdminV1alphaFeaturePolicyFeature]
attr_accessor :container_image_sources
# Defines whether a feature can be used or what values are accepted.
# Corresponds to the JSON property `dockerAddCapabilities`
# @return [Google::Apis::RemotebuildexecutionV2::GoogleDevtoolsRemotebuildexecutionAdminV1alphaFeaturePolicyFeature]
attr_accessor :docker_add_capabilities
# Defines whether a feature can be used or what values are accepted.
# Corresponds to the JSON property `dockerChrootPath`
# @return [Google::Apis::RemotebuildexecutionV2::GoogleDevtoolsRemotebuildexecutionAdminV1alphaFeaturePolicyFeature]
attr_accessor :docker_chroot_path
# Defines whether a feature can be used or what values are accepted.
# Corresponds to the JSON property `dockerNetwork`
# @return [Google::Apis::RemotebuildexecutionV2::GoogleDevtoolsRemotebuildexecutionAdminV1alphaFeaturePolicyFeature]
attr_accessor :docker_network
# Defines whether a feature can be used or what values are accepted.
# Corresponds to the JSON property `dockerPrivileged`
# @return [Google::Apis::RemotebuildexecutionV2::GoogleDevtoolsRemotebuildexecutionAdminV1alphaFeaturePolicyFeature]
attr_accessor :docker_privileged
# Defines whether a feature can be used or what values are accepted.
# Corresponds to the JSON property `dockerRunAsRoot`
# @return [Google::Apis::RemotebuildexecutionV2::GoogleDevtoolsRemotebuildexecutionAdminV1alphaFeaturePolicyFeature]
attr_accessor :docker_run_as_root
# Defines whether a feature can be used or what values are accepted.
# Corresponds to the JSON property `dockerRuntime`
# @return [Google::Apis::RemotebuildexecutionV2::GoogleDevtoolsRemotebuildexecutionAdminV1alphaFeaturePolicyFeature]
attr_accessor :docker_runtime
# Defines whether a feature can be used or what values are accepted.
# Corresponds to the JSON property `dockerSiblingContainers`
# @return [Google::Apis::RemotebuildexecutionV2::GoogleDevtoolsRemotebuildexecutionAdminV1alphaFeaturePolicyFeature]
attr_accessor :docker_sibling_containers
# linux_isolation allows overriding the docker runtime used for containers
# started on Linux.
# Corresponds to the JSON property `linuxIsolation`
# @return [String]
attr_accessor :linux_isolation
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@container_image_sources = args[:container_image_sources] if args.key?(:container_image_sources)
@docker_add_capabilities = args[:docker_add_capabilities] if args.key?(:docker_add_capabilities)
@docker_chroot_path = args[:docker_chroot_path] if args.key?(:docker_chroot_path)
@docker_network = args[:docker_network] if args.key?(:docker_network)
@docker_privileged = args[:docker_privileged] if args.key?(:docker_privileged)
@docker_run_as_root = args[:docker_run_as_root] if args.key?(:docker_run_as_root)
@docker_runtime = args[:docker_runtime] if args.key?(:docker_runtime)
@docker_sibling_containers = args[:docker_sibling_containers] if args.key?(:docker_sibling_containers)
@linux_isolation = args[:linux_isolation] if args.key?(:linux_isolation)
end
end
# Defines whether a feature can be used or what values are accepted.
class GoogleDevtoolsRemotebuildexecutionAdminV1alphaFeaturePolicyFeature
include Google::Apis::Core::Hashable
# A list of acceptable values. Only effective when the policy is `RESTRICTED`.
# Corresponds to the JSON property `allowedValues`
# @return [Array<String>]
attr_accessor :allowed_values
# The policy of the feature.
# Corresponds to the JSON property `policy`
# @return [String]
attr_accessor :policy
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@allowed_values = args[:allowed_values] if args.key?(:allowed_values)
@policy = args[:policy] if args.key?(:policy)
end
end
# The request used for `GetInstance`.
class GoogleDevtoolsRemotebuildexecutionAdminV1alphaGetInstanceRequest
include Google::Apis::Core::Hashable
# Name of the instance to retrieve. Format: `projects/[PROJECT_ID]/instances/[
# INSTANCE_ID]`.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@name = args[:name] if args.key?(:name)
end
end
# The request used for GetWorkerPool.
class GoogleDevtoolsRemotebuildexecutionAdminV1alphaGetWorkerPoolRequest
include Google::Apis::Core::Hashable
# Name of the worker pool to retrieve. Format: `projects/[PROJECT_ID]/instances/[
# INSTANCE_ID]/workerpools/[POOL_ID]`.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@name = args[:name] if args.key?(:name)
end
end
# Instance conceptually encapsulates all Remote Build Execution resources for
# remote builds. An instance consists of storage and compute resources (for
# example, `ContentAddressableStorage`, `ActionCache`, `WorkerPools`) used for
# running remote builds. All Remote Build Execution API calls are scoped to an
# instance.
class GoogleDevtoolsRemotebuildexecutionAdminV1alphaInstance
include Google::Apis::Core::Hashable
# FeaturePolicy defines features allowed to be used on RBE instances, as well as
# instance-wide behavior changes that take effect without opt-in or opt-out at
# usage time.
# Corresponds to the JSON property `featurePolicy`
# @return [Google::Apis::RemotebuildexecutionV2::GoogleDevtoolsRemotebuildexecutionAdminV1alphaFeaturePolicy]
attr_accessor :feature_policy
# The location is a GCP region. Currently only `us-central1` is supported.
# Corresponds to the JSON property `location`
# @return [String]
attr_accessor :location
# Output only. Whether stack driver logging is enabled for the instance.
# Corresponds to the JSON property `loggingEnabled`
# @return [Boolean]
attr_accessor :logging_enabled
alias_method :logging_enabled?, :logging_enabled
# Output only. Instance resource name formatted as: `projects/[PROJECT_ID]/
# instances/[INSTANCE_ID]`. Name should not be populated when creating an
# instance since it is provided in the `instance_id` field.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# Output only. State of the instance.
# Corresponds to the JSON property `state`
# @return [String]
attr_accessor :state
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@feature_policy = args[:feature_policy] if args.key?(:feature_policy)
@location = args[:location] if args.key?(:location)
@logging_enabled = args[:logging_enabled] if args.key?(:logging_enabled)
@name = args[:name] if args.key?(:name)
@state = args[:state] if args.key?(:state)
end
end
#
class GoogleDevtoolsRemotebuildexecutionAdminV1alphaListInstancesRequest
include Google::Apis::Core::Hashable
# Resource name of the project. Format: `projects/[PROJECT_ID]`.
# Corresponds to the JSON property `parent`
# @return [String]
attr_accessor :parent
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@parent = args[:parent] if args.key?(:parent)
end
end
#
class GoogleDevtoolsRemotebuildexecutionAdminV1alphaListInstancesResponse
include Google::Apis::Core::Hashable
# The list of instances in a given project.
# Corresponds to the JSON property `instances`
# @return [Array<Google::Apis::RemotebuildexecutionV2::GoogleDevtoolsRemotebuildexecutionAdminV1alphaInstance>]
attr_accessor :instances
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@instances = args[:instances] if args.key?(:instances)
end
end
#
class GoogleDevtoolsRemotebuildexecutionAdminV1alphaListWorkerPoolsRequest
include Google::Apis::Core::Hashable
# Optional. A filter expression that filters resources listed in the response.
# The expression must specify the field name, a comparison operator, and the
# value that you want to use for filtering. The value must be a string, a number,
# or a boolean. String values are case-insensitive. The comparison operator
# must be either `:`, `=`, `!=`, `>`, `>=`, `<=` or `<`. The `:` operator can be
# used with string fields to match substrings. For non-string fields it is
# equivalent to the `=` operator. The `:*` comparison can be used to test
# whether a key has been defined. You can also filter on nested fields. To
# filter on multiple expressions, you can separate expression using `AND` and `
# OR` operators, using parentheses to specify precedence. If neither operator is
# specified, `AND` is assumed. Examples: Include only pools with more than 100
# reserved workers: `(worker_count > 100) (worker_config.reserved = true)`
# Include only pools with a certain label or machines of the n1-standard family:
# `worker_config.labels.key1 : * OR worker_config.machine_type: n1-standard`
# Corresponds to the JSON property `filter`
# @return [String]
attr_accessor :filter
# Resource name of the instance. Format: `projects/[PROJECT_ID]/instances/[
# INSTANCE_ID]`.
# Corresponds to the JSON property `parent`
# @return [String]
attr_accessor :parent
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@filter = args[:filter] if args.key?(:filter)
@parent = args[:parent] if args.key?(:parent)
end
end
#
class GoogleDevtoolsRemotebuildexecutionAdminV1alphaListWorkerPoolsResponse
include Google::Apis::Core::Hashable
# The list of worker pools in a given instance.
# Corresponds to the JSON property `workerPools`
# @return [Array<Google::Apis::RemotebuildexecutionV2::GoogleDevtoolsRemotebuildexecutionAdminV1alphaWorkerPool>]
attr_accessor :worker_pools
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@worker_pools = args[:worker_pools] if args.key?(:worker_pools)
end
end
# SoleTenancyConfig specifies information required to host a pool on STNs.
class GoogleDevtoolsRemotebuildexecutionAdminV1alphaSoleTenancyConfig
include Google::Apis::Core::Hashable
# The sole-tenant node type to host the pool's workers on.
# Corresponds to the JSON property `nodeType`
# @return [String]
attr_accessor :node_type
# Zone in which STNs are reserved.
# Corresponds to the JSON property `nodesZone`
# @return [String]
attr_accessor :nodes_zone
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@node_type = args[:node_type] if args.key?(:node_type)
@nodes_zone = args[:nodes_zone] if args.key?(:nodes_zone)
end
end
# The request used for `UpdateInstance`.
class GoogleDevtoolsRemotebuildexecutionAdminV1alphaUpdateInstanceRequest
include Google::Apis::Core::Hashable
# Instance conceptually encapsulates all Remote Build Execution resources for
# remote builds. An instance consists of storage and compute resources (for
# example, `ContentAddressableStorage`, `ActionCache`, `WorkerPools`) used for
# running remote builds. All Remote Build Execution API calls are scoped to an
# instance.
# Corresponds to the JSON property `instance`
# @return [Google::Apis::RemotebuildexecutionV2::GoogleDevtoolsRemotebuildexecutionAdminV1alphaInstance]
attr_accessor :instance
# Deprecated, use instance.logging_enabled instead. Whether to enable
# Stackdriver logging for this instance.
# Corresponds to the JSON property `loggingEnabled`
# @return [Boolean]
attr_accessor :logging_enabled
alias_method :logging_enabled?, :logging_enabled
# Deprecated, use instance.Name instead. Name of the instance to update. Format:
# `projects/[PROJECT_ID]/instances/[INSTANCE_ID]`.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# The update mask applies to instance. For the `FieldMask` definition, see https:
# //developers.google.com/protocol-buffers/docs/reference/google.protobuf#
# fieldmask If an empty update_mask is provided, only the non-default valued
# field in the worker pool field will be updated. Note that in order to update a
# field to the default value (zero, false, empty string) an explicit update_mask
# must be provided.
# Corresponds to the JSON property `updateMask`
# @return [String]
attr_accessor :update_mask
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@instance = args[:instance] if args.key?(:instance)
@logging_enabled = args[:logging_enabled] if args.key?(:logging_enabled)
@name = args[:name] if args.key?(:name)
@update_mask = args[:update_mask] if args.key?(:update_mask)
end
end
# The request used for UpdateWorkerPool.
class GoogleDevtoolsRemotebuildexecutionAdminV1alphaUpdateWorkerPoolRequest
include Google::Apis::Core::Hashable
# The update mask applies to worker_pool. For the `FieldMask` definition, see
# https://developers.google.com/protocol-buffers/docs/reference/google.protobuf#
# fieldmask If an empty update_mask is provided, only the non-default valued
# field in the worker pool field will be updated. Note that in order to update a
# field to the default value (zero, false, empty string) an explicit update_mask
# must be provided.
# Corresponds to the JSON property `updateMask`
# @return [String]
attr_accessor :update_mask
# A worker pool resource in the Remote Build Execution API.
# Corresponds to the JSON property `workerPool`
# @return [Google::Apis::RemotebuildexecutionV2::GoogleDevtoolsRemotebuildexecutionAdminV1alphaWorkerPool]
attr_accessor :worker_pool
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@update_mask = args[:update_mask] if args.key?(:update_mask)
@worker_pool = args[:worker_pool] if args.key?(:worker_pool)
end
end
# Defines the configuration to be used for creating workers in the worker pool.
class GoogleDevtoolsRemotebuildexecutionAdminV1alphaWorkerConfig
include Google::Apis::Core::Hashable
# AcceleratorConfig defines the accelerator cards to attach to the VM.
# Corresponds to the JSON property `accelerator`
# @return [Google::Apis::RemotebuildexecutionV2::GoogleDevtoolsRemotebuildexecutionAdminV1alphaAcceleratorConfig]
attr_accessor :accelerator
# Required. Size of the disk attached to the worker, in GB. See https://cloud.
# google.com/compute/docs/disks/
# Corresponds to the JSON property `diskSizeGb`
# @return [Fixnum]
attr_accessor :disk_size_gb
# Required. Disk Type to use for the worker. See [Storage options](https://cloud.
# google.com/compute/docs/disks/#introduction). Currently only `pd-standard` and
# `pd-ssd` are supported.
# Corresponds to the JSON property `diskType`
# @return [String]
attr_accessor :disk_type
# Labels associated with the workers. Label keys and values can be no longer
# than 63 characters, can only contain lowercase letters, numeric characters,
# underscores and dashes. International letters are permitted. Label keys must
# start with a letter. Label values are optional. There can not be more than 64
# labels per resource.
# Corresponds to the JSON property `labels`
# @return [Hash<String,String>]
attr_accessor :labels
# Required. Machine type of the worker, such as `n1-standard-2`. See https://
# cloud.google.com/compute/docs/machine-types for a list of supported machine
# types. Note that `f1-micro` and `g1-small` are not yet supported.
# Corresponds to the JSON property `machineType`
# @return [String]
attr_accessor :machine_type
# The maximum number of actions a worker can execute concurrently.
# Corresponds to the JSON property `maxConcurrentActions`
# @return [Fixnum]
attr_accessor :max_concurrent_actions
# Minimum CPU platform to use when creating the worker. See [CPU Platforms](
# https://cloud.google.com/compute/docs/cpu-platforms).
# Corresponds to the JSON property `minCpuPlatform`
# @return [String]
attr_accessor :min_cpu_platform
# Determines the type of network access granted to workers. Possible values: - "
# public": Workers can connect to the public internet. - "private": Workers can
# only connect to Google APIs and services. - "restricted-private": Workers can
# only connect to Google APIs that are reachable through `restricted.googleapis.
# com` (`199.36.153.4/30`).
# Corresponds to the JSON property `networkAccess`
# @return [String]
attr_accessor :network_access
# Determines whether the worker is reserved (equivalent to a Compute Engine on-
# demand VM and therefore won't be preempted). See [Preemptible VMs](https://
# cloud.google.com/preemptible-vms/) for more details.
# Corresponds to the JSON property `reserved`
# @return [Boolean]
attr_accessor :reserved
alias_method :reserved?, :reserved
# SoleTenancyConfig specifies information required to host a pool on STNs.
# Corresponds to the JSON property `soleTenancy`
# @return [Google::Apis::RemotebuildexecutionV2::GoogleDevtoolsRemotebuildexecutionAdminV1alphaSoleTenancyConfig]
attr_accessor :sole_tenancy
# The name of the image used by each VM.
# Corresponds to the JSON property `vmImage`
# @return [String]
attr_accessor :vm_image
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@accelerator = args[:accelerator] if args.key?(:accelerator)
@disk_size_gb = args[:disk_size_gb] if args.key?(:disk_size_gb)
@disk_type = args[:disk_type] if args.key?(:disk_type)
@labels = args[:labels] if args.key?(:labels)
@machine_type = args[:machine_type] if args.key?(:machine_type)
@max_concurrent_actions = args[:max_concurrent_actions] if args.key?(:max_concurrent_actions)
@min_cpu_platform = args[:min_cpu_platform] if args.key?(:min_cpu_platform)
@network_access = args[:network_access] if args.key?(:network_access)
@reserved = args[:reserved] if args.key?(:reserved)
@sole_tenancy = args[:sole_tenancy] if args.key?(:sole_tenancy)
@vm_image = args[:vm_image] if args.key?(:vm_image)
end
end
# A worker pool resource in the Remote Build Execution API.
class GoogleDevtoolsRemotebuildexecutionAdminV1alphaWorkerPool
include Google::Apis::Core::Hashable
# Autoscale defines the autoscaling policy of a worker pool.
# Corresponds to the JSON property `autoscale`
# @return [Google::Apis::RemotebuildexecutionV2::GoogleDevtoolsRemotebuildexecutionAdminV1alphaAutoscale]
attr_accessor :autoscale
# Channel specifies the release channel of the pool.
# Corresponds to the JSON property `channel`
# @return [String]
attr_accessor :channel
# WorkerPool resource name formatted as: `projects/[PROJECT_ID]/instances/[
# INSTANCE_ID]/workerpools/[POOL_ID]`. name should not be populated when
# creating a worker pool since it is provided in the `poolId` field.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# Output only. State of the worker pool.
# Corresponds to the JSON property `state`
# @return [String]
attr_accessor :state
# Defines the configuration to be used for creating workers in the worker pool.
# Corresponds to the JSON property `workerConfig`
# @return [Google::Apis::RemotebuildexecutionV2::GoogleDevtoolsRemotebuildexecutionAdminV1alphaWorkerConfig]
attr_accessor :worker_config
# The desired number of workers in the worker pool. Must be a value between 0
# and 15000.
# Corresponds to the JSON property `workerCount`
# @return [Fixnum]
attr_accessor :worker_count
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@autoscale = args[:autoscale] if args.key?(:autoscale)
@channel = args[:channel] if args.key?(:channel)
@name = args[:name] if args.key?(:name)
@state = args[:state] if args.key?(:state)
@worker_config = args[:worker_config] if args.key?(:worker_config)
@worker_count = args[:worker_count] if args.key?(:worker_count)
end
end
# AdminTemp is a prelimiary set of administration tasks. It's called "Temp"
# because we do not yet know the best way to represent admin tasks; it's
# possible that this will be entirely replaced in later versions of this API. If
# this message proves to be sufficient, it will be renamed in the alpha or beta
# release of this API. This message (suitably marshalled into a protobuf.Any)
# can be used as the inline_assignment field in a lease; the lease assignment
# field should simply be `"admin"` in these cases. This message is heavily based
# on Swarming administration tasks from the LUCI project (http://github.com/luci/
# luci-py/appengine/swarming).
class GoogleDevtoolsRemoteworkersV1test2AdminTemp
include Google::Apis::Core::Hashable
# The argument to the admin action; see `Command` for semantics.
# Corresponds to the JSON property `arg`
# @return [String]
attr_accessor :arg
# The admin action; see `Command` for legal values.
# Corresponds to the JSON property `command`
# @return [String]
attr_accessor :command
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@arg = args[:arg] if args.key?(:arg)
@command = args[:command] if args.key?(:command)
end
end
# Describes a blob of binary content with its digest.
class GoogleDevtoolsRemoteworkersV1test2Blob
include Google::Apis::Core::Hashable
# The contents of the blob.
# Corresponds to the JSON property `contents`
# NOTE: Values are automatically base64 encoded/decoded in the client library.
# @return [String]
attr_accessor :contents
# The CommandTask and CommandResult messages assume the existence of a service
# that can serve blobs of content, identified by a hash and size known as a "
# digest." The method by which these blobs may be retrieved is not specified
# here, but a model implementation is in the Remote Execution API's "
# ContentAddressibleStorage" interface. In the context of the RWAPI, a Digest
# will virtually always refer to the contents of a file or a directory. The
# latter is represented by the byte-encoded Directory message.
# Corresponds to the JSON property `digest`
# @return [Google::Apis::RemotebuildexecutionV2::GoogleDevtoolsRemoteworkersV1test2Digest]
attr_accessor :digest
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@contents = args[:contents] if args.key?(:contents)
@digest = args[:digest] if args.key?(:digest)
end
end
# DEPRECATED - use CommandResult instead. Describes the actual outputs from the
# task.
class GoogleDevtoolsRemoteworkersV1test2CommandOutputs
include Google::Apis::Core::Hashable
# exit_code is only fully reliable if the status' code is OK. If the task
# exceeded its deadline or was cancelled, the process may still produce an exit
# code as it is cancelled, and this will be populated, but a successful (zero)
# is unlikely to be correct unless the status code is OK.
# Corresponds to the JSON property `exitCode`
# @return [Fixnum]
attr_accessor :exit_code
# The CommandTask and CommandResult messages assume the existence of a service
# that can serve blobs of content, identified by a hash and size known as a "
# digest." The method by which these blobs may be retrieved is not specified
# here, but a model implementation is in the Remote Execution API's "
# ContentAddressibleStorage" interface. In the context of the RWAPI, a Digest
# will virtually always refer to the contents of a file or a directory. The
# latter is represented by the byte-encoded Directory message.
# Corresponds to the JSON property `outputs`
# @return [Google::Apis::RemotebuildexecutionV2::GoogleDevtoolsRemoteworkersV1test2Digest]
attr_accessor :outputs
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@exit_code = args[:exit_code] if args.key?(:exit_code)
@outputs = args[:outputs] if args.key?(:outputs)
end
end
# DEPRECATED - use CommandResult instead. Can be used as part of CompleteRequest.
# metadata, or are part of a more sophisticated message.
class GoogleDevtoolsRemoteworkersV1test2CommandOverhead
include Google::Apis::Core::Hashable
# The elapsed time between calling Accept and Complete. The server will also
# have its own idea of what this should be, but this excludes the overhead of
# the RPCs and the bot response time.
# Corresponds to the JSON property `duration`
# @return [String]
attr_accessor :duration
# The amount of time *not* spent executing the command (ie uploading/downloading
# files).
# Corresponds to the JSON property `overhead`
# @return [String]
attr_accessor :overhead
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@duration = args[:duration] if args.key?(:duration)
@overhead = args[:overhead] if args.key?(:overhead)
end
end
# All information about the execution of a command, suitable for providing as
# the Bots interface's `Lease.result` field.
class GoogleDevtoolsRemoteworkersV1test2CommandResult
include Google::Apis::Core::Hashable
# The elapsed time between calling Accept and Complete. The server will also
# have its own idea of what this should be, but this excludes the overhead of
# the RPCs and the bot response time.
# Corresponds to the JSON property `duration`
# @return [String]
attr_accessor :duration
# The exit code of the process. An exit code of "0" should only be trusted if `
# status` has a code of OK (otherwise it may simply be unset).
# Corresponds to the JSON property `exitCode`
# @return [Fixnum]
attr_accessor :exit_code
# Implementation-dependent metadata about the task. Both servers and bots may
# define messages which can be encoded here; bots are free to provide metadata
# in multiple formats, and servers are free to choose one or more of the values
# to process and ignore others. In particular, it is *not* considered an error
# for the bot to provide the server with a field that it doesn't know about.
# Corresponds to the JSON property `metadata`
# @return [Array<Hash<String,Object>>]
attr_accessor :metadata
# The CommandTask and CommandResult messages assume the existence of a service
# that can serve blobs of content, identified by a hash and size known as a "
# digest." The method by which these blobs may be retrieved is not specified
# here, but a model implementation is in the Remote Execution API's "
# ContentAddressibleStorage" interface. In the context of the RWAPI, a Digest
# will virtually always refer to the contents of a file or a directory. The
# latter is represented by the byte-encoded Directory message.
# Corresponds to the JSON property `outputs`
# @return [Google::Apis::RemotebuildexecutionV2::GoogleDevtoolsRemoteworkersV1test2Digest]
attr_accessor :outputs
# The amount of time *not* spent executing the command (ie uploading/downloading
# files).
# Corresponds to the JSON property `overhead`
# @return [String]
attr_accessor :overhead
# The `Status` type defines a logical error model that is suitable for different
# programming environments, including REST APIs and RPC APIs. It is used by [
# gRPC](https://github.com/grpc). Each `Status` message contains three pieces of
# data: error code, error message, and error details. You can find out more
# about this error model and how to work with it in the [API Design Guide](https:
# //cloud.google.com/apis/design/errors).
# Corresponds to the JSON property `status`
# @return [Google::Apis::RemotebuildexecutionV2::GoogleRpcStatus]
attr_accessor :status
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@duration = args[:duration] if args.key?(:duration)
@exit_code = args[:exit_code] if args.key?(:exit_code)
@metadata = args[:metadata] if args.key?(:metadata)
@outputs = args[:outputs] if args.key?(:outputs)
@overhead = args[:overhead] if args.key?(:overhead)
@status = args[:status] if args.key?(:status)
end
end
# Describes a shell-style task to execute, suitable for providing as the Bots
# interface's `Lease.payload` field.
class GoogleDevtoolsRemoteworkersV1test2CommandTask
include Google::Apis::Core::Hashable
# Describes the expected outputs of the command.
# Corresponds to the JSON property `expectedOutputs`
# @return [Google::Apis::RemotebuildexecutionV2::GoogleDevtoolsRemoteworkersV1test2CommandTaskOutputs]
attr_accessor :expected_outputs
# Describes the inputs to a shell-style task.
# Corresponds to the JSON property `inputs`
# @return [Google::Apis::RemotebuildexecutionV2::GoogleDevtoolsRemoteworkersV1test2CommandTaskInputs]
attr_accessor :inputs
# Describes the timeouts associated with this task.
# Corresponds to the JSON property `timeouts`
# @return [Google::Apis::RemotebuildexecutionV2::GoogleDevtoolsRemoteworkersV1test2CommandTaskTimeouts]
attr_accessor :timeouts
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@expected_outputs = args[:expected_outputs] if args.key?(:expected_outputs)
@inputs = args[:inputs] if args.key?(:inputs)
@timeouts = args[:timeouts] if args.key?(:timeouts)
end
end
# Describes the inputs to a shell-style task.
class GoogleDevtoolsRemoteworkersV1test2CommandTaskInputs
include Google::Apis::Core::Hashable
# The command itself to run (e.g., argv). This field should be passed directly
# to the underlying operating system, and so it must be sensible to that
# operating system. For example, on Windows, the first argument might be "C:\
# Windows\System32\ping.exe" - that is, using drive letters and backslashes. A
# command for a *nix system, on the other hand, would use forward slashes. All
# other fields in the RWAPI must consistently use forward slashes, since those
# fields may be interpretted by both the service and the bot.
# Corresponds to the JSON property `arguments`
# @return [Array<String>]
attr_accessor :arguments
# All environment variables required by the task.
# Corresponds to the JSON property `environmentVariables`
# @return [Array<Google::Apis::RemotebuildexecutionV2::GoogleDevtoolsRemoteworkersV1test2CommandTaskInputsEnvironmentVariable>]
attr_accessor :environment_variables
# The input filesystem to be set up prior to the task beginning. The contents
# should be a repeated set of FileMetadata messages though other formats are
# allowed if better for the implementation (eg, a LUCI-style .isolated file).
# This field is repeated since implementations might want to cache the metadata,
# in which case it may be useful to break up portions of the filesystem that
# change frequently (eg, specific input files) from those that don't (eg,
# standard header files).
# Corresponds to the JSON property `files`
# @return [Array<Google::Apis::RemotebuildexecutionV2::GoogleDevtoolsRemoteworkersV1test2Digest>]
attr_accessor :files
# Inline contents for blobs expected to be needed by the bot to execute the task.
# For example, contents of entries in `files` or blobs that are indirectly
# referenced by an entry there. The bot should check against this list before
# downloading required task inputs to reduce the number of communications
# between itself and the remote CAS server.
# Corresponds to the JSON property `inlineBlobs`
# @return [Array<Google::Apis::RemotebuildexecutionV2::GoogleDevtoolsRemoteworkersV1test2Blob>]
attr_accessor :inline_blobs
# Directory from which a command is executed. It is a relative directory with
# respect to the bot's working directory (i.e., "./"). If it is non-empty, then
# it must exist under "./". Otherwise, "./" will be used.
# Corresponds to the JSON property `workingDirectory`
# @return [String]
attr_accessor :working_directory
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@arguments = args[:arguments] if args.key?(:arguments)
@environment_variables = args[:environment_variables] if args.key?(:environment_variables)
@files = args[:files] if args.key?(:files)
@inline_blobs = args[:inline_blobs] if args.key?(:inline_blobs)
@working_directory = args[:working_directory] if args.key?(:working_directory)
end
end
# An environment variable required by this task.
class GoogleDevtoolsRemoteworkersV1test2CommandTaskInputsEnvironmentVariable
include Google::Apis::Core::Hashable
# The envvar name.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# The envvar value.
# Corresponds to the JSON property `value`
# @return [String]
attr_accessor :value
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@name = args[:name] if args.key?(:name)
@value = args[:value] if args.key?(:value)
end
end
# Describes the expected outputs of the command.
class GoogleDevtoolsRemoteworkersV1test2CommandTaskOutputs
include Google::Apis::Core::Hashable
# A list of expected directories, relative to the execution root. All paths MUST
# be delimited by forward slashes.
# Corresponds to the JSON property `directories`
# @return [Array<String>]
attr_accessor :directories
# A list of expected files, relative to the execution root. All paths MUST be
# delimited by forward slashes.
# Corresponds to the JSON property `files`
# @return [Array<String>]
attr_accessor :files
# The destination to which any stderr should be sent. The method by which the
# bot should send the stream contents to that destination is not defined in this
# API. As examples, the destination could be a file referenced in the `files`
# field in this message, or it could be a URI that must be written via the
# ByteStream API.
# Corresponds to the JSON property `stderrDestination`
# @return [String]
attr_accessor :stderr_destination
# The destination to which any stdout should be sent. The method by which the
# bot should send the stream contents to that destination is not defined in this
# API. As examples, the destination could be a file referenced in the `files`
# field in this message, or it could be a URI that must be written via the
# ByteStream API.
# Corresponds to the JSON property `stdoutDestination`
# @return [String]
attr_accessor :stdout_destination
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@directories = args[:directories] if args.key?(:directories)
@files = args[:files] if args.key?(:files)
@stderr_destination = args[:stderr_destination] if args.key?(:stderr_destination)
@stdout_destination = args[:stdout_destination] if args.key?(:stdout_destination)
end
end
# Describes the timeouts associated with this task.
class GoogleDevtoolsRemoteworkersV1test2CommandTaskTimeouts
include Google::Apis::Core::Hashable
# This specifies the maximum time that the task can run, excluding the time
# required to download inputs or upload outputs. That is, the worker will
# terminate the task if it runs longer than this.
# Corresponds to the JSON property `execution`
# @return [String]
attr_accessor :execution
# This specifies the maximum amount of time the task can be idle - that is, go
# without generating some output in either stdout or stderr. If the process is
# silent for more than the specified time, the worker will terminate the task.
# Corresponds to the JSON property `idle`
# @return [String]
attr_accessor :idle
# If the execution or IO timeouts are exceeded, the worker will try to
# gracefully terminate the task and return any existing logs. However, tasks may
# be hard-frozen in which case this process will fail. This timeout specifies
# how long to wait for a terminated task to shut down gracefully (e.g. via
# SIGTERM) before we bring down the hammer (e.g. SIGKILL on *nix,
# CTRL_BREAK_EVENT on Windows).
# Corresponds to the JSON property `shutdown`
# @return [String]
attr_accessor :shutdown
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@execution = args[:execution] if args.key?(:execution)
@idle = args[:idle] if args.key?(:idle)
@shutdown = args[:shutdown] if args.key?(:shutdown)
end
end
# The CommandTask and CommandResult messages assume the existence of a service
# that can serve blobs of content, identified by a hash and size known as a "
# digest." The method by which these blobs may be retrieved is not specified
# here, but a model implementation is in the Remote Execution API's "
# ContentAddressibleStorage" interface. In the context of the RWAPI, a Digest
# will virtually always refer to the contents of a file or a directory. The
# latter is represented by the byte-encoded Directory message.
class GoogleDevtoolsRemoteworkersV1test2Digest
include Google::Apis::Core::Hashable
# A string-encoded hash (eg "1a2b3c", not the byte array [0x1a, 0x2b, 0x3c])
# using an implementation-defined hash algorithm (eg SHA-256).
# Corresponds to the JSON property `hash`
# @return [String]
attr_accessor :hash_prop
# The size of the contents. While this is not strictly required as part of an
# identifier (after all, any given hash will have exactly one canonical size),
# it's useful in almost all cases when one might want to send or retrieve blobs
# of content and is included here for this reason.
# Corresponds to the JSON property `sizeBytes`
# @return [Fixnum]
attr_accessor :size_bytes
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@hash_prop = args[:hash_prop] if args.key?(:hash_prop)
@size_bytes = args[:size_bytes] if args.key?(:size_bytes)
end
end
# The contents of a directory. Similar to the equivalent message in the Remote
# Execution API.
class GoogleDevtoolsRemoteworkersV1test2Directory
include Google::Apis::Core::Hashable
# Any subdirectories
# Corresponds to the JSON property `directories`
# @return [Array<Google::Apis::RemotebuildexecutionV2::GoogleDevtoolsRemoteworkersV1test2DirectoryMetadata>]
attr_accessor :directories
# The files in this directory
# Corresponds to the JSON property `files`
# @return [Array<Google::Apis::RemotebuildexecutionV2::GoogleDevtoolsRemoteworkersV1test2FileMetadata>]
attr_accessor :files
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@directories = args[:directories] if args.key?(:directories)
@files = args[:files] if args.key?(:files)
end
end
# The metadata for a directory. Similar to the equivalent message in the Remote
# Execution API.
class GoogleDevtoolsRemoteworkersV1test2DirectoryMetadata
include Google::Apis::Core::Hashable
# The CommandTask and CommandResult messages assume the existence of a service
# that can serve blobs of content, identified by a hash and size known as a "
# digest." The method by which these blobs may be retrieved is not specified
# here, but a model implementation is in the Remote Execution API's "
# ContentAddressibleStorage" interface. In the context of the RWAPI, a Digest
# will virtually always refer to the contents of a file or a directory. The
# latter is represented by the byte-encoded Directory message.
# Corresponds to the JSON property `digest`
# @return [Google::Apis::RemotebuildexecutionV2::GoogleDevtoolsRemoteworkersV1test2Digest]
attr_accessor :digest
# The path of the directory, as in FileMetadata.path.
# Corresponds to the JSON property `path`
# @return [String]
attr_accessor :path
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@digest = args[:digest] if args.key?(:digest)
@path = args[:path] if args.key?(:path)
end
end
# The metadata for a file. Similar to the equivalent message in the Remote
# Execution API.
class GoogleDevtoolsRemoteworkersV1test2FileMetadata
include Google::Apis::Core::Hashable
# If the file is small enough, its contents may also or alternatively be listed
# here.
# Corresponds to the JSON property `contents`
# NOTE: Values are automatically base64 encoded/decoded in the client library.
# @return [String]
attr_accessor :contents
# The CommandTask and CommandResult messages assume the existence of a service
# that can serve blobs of content, identified by a hash and size known as a "
# digest." The method by which these blobs may be retrieved is not specified
# here, but a model implementation is in the Remote Execution API's "
# ContentAddressibleStorage" interface. In the context of the RWAPI, a Digest
# will virtually always refer to the contents of a file or a directory. The
# latter is represented by the byte-encoded Directory message.
# Corresponds to the JSON property `digest`
# @return [Google::Apis::RemotebuildexecutionV2::GoogleDevtoolsRemoteworkersV1test2Digest]
attr_accessor :digest
# Properties of the file
# Corresponds to the JSON property `isExecutable`
# @return [Boolean]
attr_accessor :is_executable
alias_method :is_executable?, :is_executable
# The path of this file. If this message is part of the CommandOutputs.outputs
# fields, the path is relative to the execution root and must correspond to an
# entry in CommandTask.outputs.files. If this message is part of a Directory
# message, then the path is relative to the root of that directory. All paths
# MUST be delimited by forward slashes.
# Corresponds to the JSON property `path`
# @return [String]
attr_accessor :path
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@contents = args[:contents] if args.key?(:contents)
@digest = args[:digest] if args.key?(:digest)
@is_executable = args[:is_executable] if args.key?(:is_executable)
@path = args[:path] if args.key?(:path)
end
end
# This resource represents a long-running operation that is the result of a
# network API call.
class GoogleLongrunningOperation
include Google::Apis::Core::Hashable
# If the value is `false`, it means the operation is still in progress. If `true`
# , the operation is completed, and either `error` or `response` is available.
# Corresponds to the JSON property `done`
# @return [Boolean]
attr_accessor :done
alias_method :done?, :done
# The `Status` type defines a logical error model that is suitable for different
# programming environments, including REST APIs and RPC APIs. It is used by [
# gRPC](https://github.com/grpc). Each `Status` message contains three pieces of
# data: error code, error message, and error details. You can find out more
# about this error model and how to work with it in the [API Design Guide](https:
# //cloud.google.com/apis/design/errors).
# Corresponds to the JSON property `error`
# @return [Google::Apis::RemotebuildexecutionV2::GoogleRpcStatus]
attr_accessor :error
# Service-specific metadata associated with the operation. It typically contains
# progress information and common metadata such as create time. Some services
# might not provide such metadata. Any method that returns a long-running
# operation should document the metadata type, if any.
# Corresponds to the JSON property `metadata`
# @return [Hash<String,Object>]
attr_accessor :metadata
# The server-assigned name, which is only unique within the same service that
# originally returns it. If you use the default HTTP mapping, the `name` should
# be a resource name ending with `operations/`unique_id``.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# The normal response of the operation in case of success. If the original
# method returns no data on success, such as `Delete`, the response is `google.
# protobuf.Empty`. If the original method is standard `Get`/`Create`/`Update`,
# the response should be the resource. For other methods, the response should
# have the type `XxxResponse`, where `Xxx` is the original method name. For
# example, if the original method name is `TakeSnapshot()`, the inferred
# response type is `TakeSnapshotResponse`.
# Corresponds to the JSON property `response`
# @return [Hash<String,Object>]
attr_accessor :response
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@done = args[:done] if args.key?(:done)
@error = args[:error] if args.key?(:error)
@metadata = args[:metadata] if args.key?(:metadata)
@name = args[:name] if args.key?(:name)
@response = args[:response] if args.key?(:response)
end
end
# The `Status` type defines a logical error model that is suitable for different
# programming environments, including REST APIs and RPC APIs. It is used by [
# gRPC](https://github.com/grpc). Each `Status` message contains three pieces of
# data: error code, error message, and error details. You can find out more
# about this error model and how to work with it in the [API Design Guide](https:
# //cloud.google.com/apis/design/errors).
class GoogleRpcStatus
include Google::Apis::Core::Hashable
# The status code, which should be an enum value of google.rpc.Code.
# Corresponds to the JSON property `code`
# @return [Fixnum]
attr_accessor :code
# A list of messages that carry the error details. There is a common set of
# message types for APIs to use.
# Corresponds to the JSON property `details`
# @return [Array<Hash<String,Object>>]
attr_accessor :details
# A developer-facing error message, which should be in English. Any user-facing
# error message should be localized and sent in the google.rpc.Status.details
# field, or localized by the client.
# Corresponds to the JSON property `message`
# @return [String]
attr_accessor :message
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@code = args[:code] if args.key?(:code)
@details = args[:details] if args.key?(:details)
@message = args[:message] if args.key?(:message)
end
end
end
end
end
Reference in New Issue View Git Blame Copy Permalink