google-api-ruby-client/generated/google-apis-cloudasset_v1/lib/google/apis/cloudasset_v1/classes.rb

3636 lines
175 KiB
Ruby

# Copyright 2020 Google LLC
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
require 'date'
require 'google/apis/core/base_service'
require 'google/apis/core/json_representation'
require 'google/apis/core/hashable'
require 'google/apis/errors'
module Google
module Apis
module CloudassetV1
# Specifies roles and/or permissions to analyze, to determine both the
# identities possessing them and the resources they control. If multiple values
# are specified, results will include roles or permissions matching any of them.
# The total number of roles and permissions should be equal or less than 10.
class AccessSelector
include Google::Apis::Core::Hashable
# Optional. The permissions to appear in result.
# Corresponds to the JSON property `permissions`
# @return [Array<String>]
attr_accessor :permissions
# Optional. The roles to appear in result.
# Corresponds to the JSON property `roles`
# @return [Array<String>]
attr_accessor :roles
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@permissions = args[:permissions] if args.key?(:permissions)
@roles = args[:roles] if args.key?(:roles)
end
end
# A request message for AssetService.AnalyzeIamPolicyLongrunning.
class AnalyzeIamPolicyLongrunningRequest
include Google::Apis::Core::Hashable
# ## LINT.IfChange Keep in sync with ## logs/proto/cloud_asset_inventory/
# iam_policy_analyzer_log.proto IAM policy analysis query message.
# Corresponds to the JSON property `analysisQuery`
# @return [Google::Apis::CloudassetV1::IamPolicyAnalysisQuery]
attr_accessor :analysis_query
# Output configuration for export IAM policy analysis destination.
# Corresponds to the JSON property `outputConfig`
# @return [Google::Apis::CloudassetV1::IamPolicyAnalysisOutputConfig]
attr_accessor :output_config
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@analysis_query = args[:analysis_query] if args.key?(:analysis_query)
@output_config = args[:output_config] if args.key?(:output_config)
end
end
# A response message for AssetService.AnalyzeIamPolicy.
class AnalyzeIamPolicyResponse
include Google::Apis::Core::Hashable
# Represents whether all entries in the main_analysis and
# service_account_impersonation_analysis have been fully explored to answer the
# query in the request.
# Corresponds to the JSON property `fullyExplored`
# @return [Boolean]
attr_accessor :fully_explored
alias_method :fully_explored?, :fully_explored
# An analysis message to group the query and results.
# Corresponds to the JSON property `mainAnalysis`
# @return [Google::Apis::CloudassetV1::IamPolicyAnalysis]
attr_accessor :main_analysis
# The service account impersonation analysis if AnalyzeIamPolicyRequest.
# analyze_service_account_impersonation is enabled.
# Corresponds to the JSON property `serviceAccountImpersonationAnalysis`
# @return [Array<Google::Apis::CloudassetV1::IamPolicyAnalysis>]
attr_accessor :service_account_impersonation_analysis
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@fully_explored = args[:fully_explored] if args.key?(:fully_explored)
@main_analysis = args[:main_analysis] if args.key?(:main_analysis)
@service_account_impersonation_analysis = args[:service_account_impersonation_analysis] if args.key?(:service_account_impersonation_analysis)
end
end
# An asset in Google Cloud. An asset can be any resource in the Google Cloud [
# resource hierarchy](https://cloud.google.com/resource-manager/docs/cloud-
# platform-resource-hierarchy), a resource outside the Google Cloud resource
# hierarchy (such as Google Kubernetes Engine clusters and objects), or a policy
# (e.g. Cloud IAM policy). See [Supported asset types](https://cloud.google.com/
# asset-inventory/docs/supported-asset-types) for more information.
class Asset
include Google::Apis::Core::Hashable
# An `AccessLevel` is a label that can be applied to requests to Google Cloud
# services, along with a list of requirements necessary for the label to be
# applied.
# Corresponds to the JSON property `accessLevel`
# @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1AccessLevel]
attr_accessor :access_level
# `AccessPolicy` is a container for `AccessLevels` (which define the necessary
# attributes to use Google Cloud services) and `ServicePerimeters` (which define
# regions of services able to freely pass data within a perimeter). An access
# policy is globally visible within an organization, and the restrictions it
# specifies apply to all projects within an organization.
# Corresponds to the JSON property `accessPolicy`
# @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1AccessPolicy]
attr_accessor :access_policy
# The ancestry path of an asset in Google Cloud [resource hierarchy](https://
# cloud.google.com/resource-manager/docs/cloud-platform-resource-hierarchy),
# represented as a list of relative resource names. An ancestry path starts with
# the closest ancestor in the hierarchy and ends at root. If the asset is a
# project, folder, or organization, the ancestry path starts from the asset
# itself. Example: `["projects/123456789", "folders/5432", "organizations/1234"]`
# Corresponds to the JSON property `ancestors`
# @return [Array<String>]
attr_accessor :ancestors
# The type of the asset. Example: `compute.googleapis.com/Disk` See [Supported
# asset types](https://cloud.google.com/asset-inventory/docs/supported-asset-
# types) for more information.
# Corresponds to the JSON property `assetType`
# @return [String]
attr_accessor :asset_type
# An Identity and Access Management (IAM) policy, which specifies access
# controls for Google Cloud resources. A `Policy` is a collection of `bindings`.
# A `binding` binds one or more `members` to a single `role`. Members can be
# user accounts, service accounts, Google groups, and domains (such as G Suite).
# A `role` is a named list of permissions; each `role` can be an IAM predefined
# role or a user-created custom role. For some types of Google Cloud resources,
# a `binding` can also specify a `condition`, which is a logical expression that
# allows access to a resource only if the expression evaluates to `true`. A
# condition can add constraints based on attributes of the request, the resource,
# or both. To learn which resources support conditions in their IAM policies,
# see the [IAM documentation](https://cloud.google.com/iam/help/conditions/
# resource-policies). **JSON example:** ` "bindings": [ ` "role": "roles/
# resourcemanager.organizationAdmin", "members": [ "user:mike@example.com", "
# group:admins@example.com", "domain:google.com", "serviceAccount:my-project-id@
# appspot.gserviceaccount.com" ] `, ` "role": "roles/resourcemanager.
# organizationViewer", "members": [ "user:eve@example.com" ], "condition": ` "
# title": "expirable access", "description": "Does not grant access after Sep
# 2020", "expression": "request.time < timestamp('2020-10-01T00:00:00.000Z')", `
# ` ], "etag": "BwWWja0YfJA=", "version": 3 ` **YAML example:** bindings: -
# members: - user:mike@example.com - group:admins@example.com - domain:google.
# com - serviceAccount:my-project-id@appspot.gserviceaccount.com role: roles/
# resourcemanager.organizationAdmin - members: - user:eve@example.com role:
# roles/resourcemanager.organizationViewer condition: title: expirable access
# description: Does not grant access after Sep 2020 expression: request.time <
# timestamp('2020-10-01T00:00:00.000Z') - etag: BwWWja0YfJA= - version: 3 For a
# description of IAM and its features, see the [IAM documentation](https://cloud.
# google.com/iam/docs/).
# Corresponds to the JSON property `iamPolicy`
# @return [Google::Apis::CloudassetV1::Policy]
attr_accessor :iam_policy
# The full name of the asset. Example: `//compute.googleapis.com/projects/
# my_project_123/zones/zone1/instances/instance1` See [Resource names](https://
# cloud.google.com/apis/design/resource_names#full_resource_name) for more
# information.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# A representation of an [organization policy](https://cloud.google.com/resource-
# manager/docs/organization-policy/overview#organization_policy). There can be
# more than one organization policy with different constraints set on a given
# resource.
# Corresponds to the JSON property `orgPolicy`
# @return [Array<Google::Apis::CloudassetV1::GoogleCloudOrgpolicyV1Policy>]
attr_accessor :org_policy
# The inventory details of a VM.
# Corresponds to the JSON property `osInventory`
# @return [Google::Apis::CloudassetV1::Inventory]
attr_accessor :os_inventory
# A representation of a Google Cloud resource.
# Corresponds to the JSON property `resource`
# @return [Google::Apis::CloudassetV1::Resource]
attr_accessor :resource
# `ServicePerimeter` describes a set of Google Cloud resources which can freely
# import and export data amongst themselves, but not export outside of the `
# ServicePerimeter`. If a request with a source within this `ServicePerimeter`
# has a target outside of the `ServicePerimeter`, the request will be blocked.
# Otherwise the request is allowed. There are two types of Service Perimeter -
# Regular and Bridge. Regular Service Perimeters cannot overlap, a single Google
# Cloud project can only belong to a single regular Service Perimeter. Service
# Perimeter Bridges can contain only Google Cloud projects as members, a single
# Google Cloud project may belong to multiple Service Perimeter Bridges.
# Corresponds to the JSON property `servicePerimeter`
# @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1ServicePerimeter]
attr_accessor :service_perimeter
# The last update timestamp of an asset. update_time is updated when create/
# update/delete operation is performed.
# Corresponds to the JSON property `updateTime`
# @return [String]
attr_accessor :update_time
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@access_level = args[:access_level] if args.key?(:access_level)
@access_policy = args[:access_policy] if args.key?(:access_policy)
@ancestors = args[:ancestors] if args.key?(:ancestors)
@asset_type = args[:asset_type] if args.key?(:asset_type)
@iam_policy = args[:iam_policy] if args.key?(:iam_policy)
@name = args[:name] if args.key?(:name)
@org_policy = args[:org_policy] if args.key?(:org_policy)
@os_inventory = args[:os_inventory] if args.key?(:os_inventory)
@resource = args[:resource] if args.key?(:resource)
@service_perimeter = args[:service_perimeter] if args.key?(:service_perimeter)
@update_time = args[:update_time] if args.key?(:update_time)
end
end
# Specifies the audit configuration for a service. The configuration determines
# which permission types are logged, and what identities, if any, are exempted
# from logging. An AuditConfig must have one or more AuditLogConfigs. If there
# are AuditConfigs for both `allServices` and a specific service, the union of
# the two AuditConfigs is used for that service: the log_types specified in each
# AuditConfig are enabled, and the exempted_members in each AuditLogConfig are
# exempted. Example Policy with multiple AuditConfigs: ` "audit_configs": [ ` "
# service": "allServices", "audit_log_configs": [ ` "log_type": "DATA_READ", "
# exempted_members": [ "user:jose@example.com" ] `, ` "log_type": "DATA_WRITE" `,
# ` "log_type": "ADMIN_READ" ` ] `, ` "service": "sampleservice.googleapis.com",
# "audit_log_configs": [ ` "log_type": "DATA_READ" `, ` "log_type": "DATA_WRITE"
# , "exempted_members": [ "user:aliya@example.com" ] ` ] ` ] ` For sampleservice,
# this policy enables DATA_READ, DATA_WRITE and ADMIN_READ logging. It also
# exempts jose@example.com from DATA_READ logging, and aliya@example.com from
# DATA_WRITE logging.
class AuditConfig
include Google::Apis::Core::Hashable
# The configuration for logging of each type of permission.
# Corresponds to the JSON property `auditLogConfigs`
# @return [Array<Google::Apis::CloudassetV1::AuditLogConfig>]
attr_accessor :audit_log_configs
# Specifies a service that will be enabled for audit logging. For example, `
# storage.googleapis.com`, `cloudsql.googleapis.com`. `allServices` is a special
# value that covers all services.
# Corresponds to the JSON property `service`
# @return [String]
attr_accessor :service
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@audit_log_configs = args[:audit_log_configs] if args.key?(:audit_log_configs)
@service = args[:service] if args.key?(:service)
end
end
# Provides the configuration for logging a type of permissions. Example: ` "
# audit_log_configs": [ ` "log_type": "DATA_READ", "exempted_members": [ "user:
# jose@example.com" ] `, ` "log_type": "DATA_WRITE" ` ] ` This enables '
# DATA_READ' and 'DATA_WRITE' logging, while exempting jose@example.com from
# DATA_READ logging.
class AuditLogConfig
include Google::Apis::Core::Hashable
# Specifies the identities that do not cause logging for this type of permission.
# Follows the same format of Binding.members.
# Corresponds to the JSON property `exemptedMembers`
# @return [Array<String>]
attr_accessor :exempted_members
# The log type that this config enables.
# Corresponds to the JSON property `logType`
# @return [String]
attr_accessor :log_type
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@exempted_members = args[:exempted_members] if args.key?(:exempted_members)
@log_type = args[:log_type] if args.key?(:log_type)
end
end
# Batch get assets history response.
class BatchGetAssetsHistoryResponse
include Google::Apis::Core::Hashable
# A list of assets with valid time windows.
# Corresponds to the JSON property `assets`
# @return [Array<Google::Apis::CloudassetV1::TemporalAsset>]
attr_accessor :assets
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@assets = args[:assets] if args.key?(:assets)
end
end
# A BigQuery destination for exporting assets to.
class BigQueryDestination
include Google::Apis::Core::Hashable
# Required. The BigQuery dataset in format "projects/projectId/datasets/
# datasetId", to which the snapshot result should be exported. If this dataset
# does not exist, the export call returns an INVALID_ARGUMENT error.
# Corresponds to the JSON property `dataset`
# @return [String]
attr_accessor :dataset
# If the destination table already exists and this flag is `TRUE`, the table
# will be overwritten by the contents of assets snapshot. If the flag is `FALSE`
# or unset and the destination table already exists, the export call returns an
# INVALID_ARGUMEMT error.
# Corresponds to the JSON property `force`
# @return [Boolean]
attr_accessor :force
alias_method :force?, :force
# Specifications of BigQuery partitioned table as export destination.
# Corresponds to the JSON property `partitionSpec`
# @return [Google::Apis::CloudassetV1::PartitionSpec]
attr_accessor :partition_spec
# If this flag is `TRUE`, the snapshot results will be written to one or
# multiple tables, each of which contains results of one asset type. The [force]
# and [partition_spec] fields will apply to each of them. Field [table] will be
# concatenated with "_" and the asset type names (see https://cloud.google.com/
# asset-inventory/docs/supported-asset-types for supported asset types) to
# construct per-asset-type table names, in which all non-alphanumeric characters
# like "." and "/" will be substituted by "_". Example: if field [table] is "
# mytable" and snapshot results contain "storage.googleapis.com/Bucket" assets,
# the corresponding table name will be "mytable_storage_googleapis_com_Bucket".
# If any of these tables does not exist, a new table with the concatenated name
# will be created. When [content_type] in the ExportAssetsRequest is `RESOURCE`,
# the schema of each table will include RECORD-type columns mapped to the nested
# fields in the Asset.resource.data field of that asset type (up to the 15
# nested level BigQuery supports (https://cloud.google.com/bigquery/docs/nested-
# repeated#limitations)). The fields in >15 nested levels will be stored in JSON
# format string as a child column of its parent RECORD column. If error occurs
# when exporting to any table, the whole export call will return an error but
# the export results that already succeed will persist. Example: if exporting to
# table_type_A succeeds when exporting to table_type_B fails during one export
# call, the results in table_type_A will persist and there will not be partial
# results persisting in a table.
# Corresponds to the JSON property `separateTablesPerAssetType`
# @return [Boolean]
attr_accessor :separate_tables_per_asset_type
alias_method :separate_tables_per_asset_type?, :separate_tables_per_asset_type
# Required. The BigQuery table to which the snapshot result should be written.
# If this table does not exist, a new table with the given name will be created.
# Corresponds to the JSON property `table`
# @return [String]
attr_accessor :table
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@dataset = args[:dataset] if args.key?(:dataset)
@force = args[:force] if args.key?(:force)
@partition_spec = args[:partition_spec] if args.key?(:partition_spec)
@separate_tables_per_asset_type = args[:separate_tables_per_asset_type] if args.key?(:separate_tables_per_asset_type)
@table = args[:table] if args.key?(:table)
end
end
# Associates `members` with a `role`.
class Binding
include Google::Apis::Core::Hashable
# Represents a textual expression in the Common Expression Language (CEL) syntax.
# CEL is a C-like expression language. The syntax and semantics of CEL are
# documented at https://github.com/google/cel-spec. Example (Comparison): title:
# "Summary size limit" description: "Determines if a summary is less than 100
# chars" expression: "document.summary.size() < 100" Example (Equality): title: "
# Requestor is owner" description: "Determines if requestor is the document
# owner" expression: "document.owner == request.auth.claims.email" Example (
# Logic): title: "Public documents" description: "Determine whether the document
# should be publicly visible" expression: "document.type != 'private' &&
# document.type != 'internal'" Example (Data Manipulation): title: "Notification
# string" description: "Create a notification string with a timestamp."
# expression: "'New message received at ' + string(document.create_time)" The
# exact variables and functions that may be referenced within an expression are
# determined by the service that evaluates it. See the service documentation for
# additional information.
# Corresponds to the JSON property `condition`
# @return [Google::Apis::CloudassetV1::Expr]
attr_accessor :condition
# Specifies the identities requesting access for a Cloud Platform resource. `
# members` can have the following values: * `allUsers`: A special identifier
# that represents anyone who is on the internet; with or without a Google
# account. * `allAuthenticatedUsers`: A special identifier that represents
# anyone who is authenticated with a Google account or a service account. * `
# user:`emailid``: An email address that represents a specific Google account.
# For example, `alice@example.com` . * `serviceAccount:`emailid``: An email
# address that represents a service account. For example, `my-other-app@appspot.
# gserviceaccount.com`. * `group:`emailid``: An email address that represents a
# Google group. For example, `admins@example.com`. * `deleted:user:`emailid`?uid=
# `uniqueid``: An email address (plus unique identifier) representing a user
# that has been recently deleted. For example, `alice@example.com?uid=
# 123456789012345678901`. If the user is recovered, this value reverts to `user:`
# emailid`` and the recovered user retains the role in the binding. * `deleted:
# serviceAccount:`emailid`?uid=`uniqueid``: An email address (plus unique
# identifier) representing a service account that has been recently deleted. For
# example, `my-other-app@appspot.gserviceaccount.com?uid=123456789012345678901`.
# If the service account is undeleted, this value reverts to `serviceAccount:`
# emailid`` and the undeleted service account retains the role in the binding. *
# `deleted:group:`emailid`?uid=`uniqueid``: An email address (plus unique
# identifier) representing a Google group that has been recently deleted. For
# example, `admins@example.com?uid=123456789012345678901`. If the group is
# recovered, this value reverts to `group:`emailid`` and the recovered group
# retains the role in the binding. * `domain:`domain``: The G Suite domain (
# primary) that represents all the users of that domain. For example, `google.
# com` or `example.com`.
# Corresponds to the JSON property `members`
# @return [Array<String>]
attr_accessor :members
# Role that is assigned to `members`. For example, `roles/viewer`, `roles/editor`
# , or `roles/owner`.
# Corresponds to the JSON property `role`
# @return [String]
attr_accessor :role
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@condition = args[:condition] if args.key?(:condition)
@members = args[:members] if args.key?(:members)
@role = args[:role] if args.key?(:role)
end
end
# Create asset feed request.
class CreateFeedRequest
include Google::Apis::Core::Hashable
# An asset feed used to export asset updates to a destinations. An asset feed
# filter controls what updates are exported. The asset feed must be created
# within a project, organization, or folder. Supported destinations are: Pub/Sub
# topics.
# Corresponds to the JSON property `feed`
# @return [Google::Apis::CloudassetV1::Feed]
attr_accessor :feed
# Required. This is the client-assigned asset feed identifier and it needs to be
# unique under a specific parent project/folder/organization.
# Corresponds to the JSON property `feedId`
# @return [String]
attr_accessor :feed_id
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@feed = args[:feed] if args.key?(:feed)
@feed_id = args[:feed_id] if args.key?(:feed_id)
end
end
# A generic empty message that you can re-use to avoid defining duplicated empty
# messages in your APIs. A typical example is to use it as the request or the
# response type of an API method. For instance: service Foo ` rpc Bar(google.
# protobuf.Empty) returns (google.protobuf.Empty); ` The JSON representation for
# `Empty` is empty JSON object ````.
class Empty
include Google::Apis::Core::Hashable
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
end
end
# Explanation about the IAM policy search result.
class Explanation
include Google::Apis::Core::Hashable
# The map from roles to their included permissions that match the permission
# query (i.e., a query containing `policy.role.permissions:`). Example: if query
# `policy.role.permissions:compute.disk.get` matches a policy binding that
# contains owner role, the matched_permissions will be ``"roles/owner": ["
# compute.disk.get"]``. The roles can also be found in the returned `policy`
# bindings. Note that the map is populated only for requests with permission
# queries.
# Corresponds to the JSON property `matchedPermissions`
# @return [Hash<String,Google::Apis::CloudassetV1::Permissions>]
attr_accessor :matched_permissions
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@matched_permissions = args[:matched_permissions] if args.key?(:matched_permissions)
end
end
# Export asset request.
class ExportAssetsRequest
include Google::Apis::Core::Hashable
# A list of asset types to take a snapshot for. For example: "compute.googleapis.
# com/Disk". Regular expressions are also supported. For example: * "compute.
# googleapis.com.*" snapshots resources whose asset type starts with "compute.
# googleapis.com". * ".*Instance" snapshots resources whose asset type ends with
# "Instance". * ".*Instance.*" snapshots resources whose asset type contains "
# Instance". See [RE2](https://github.com/google/re2/wiki/Syntax) for all
# supported regular expression syntax. If the regular expression does not match
# any supported asset type, an INVALID_ARGUMENT error will be returned. If
# specified, only matching assets will be returned, otherwise, it will snapshot
# all asset types. See [Introduction to Cloud Asset Inventory](https://cloud.
# google.com/asset-inventory/docs/overview) for all supported asset types.
# Corresponds to the JSON property `assetTypes`
# @return [Array<String>]
attr_accessor :asset_types
# Asset content type. If not specified, no content but the asset name will be
# returned.
# Corresponds to the JSON property `contentType`
# @return [String]
attr_accessor :content_type
# Output configuration for export assets destination.
# Corresponds to the JSON property `outputConfig`
# @return [Google::Apis::CloudassetV1::OutputConfig]
attr_accessor :output_config
# Timestamp to take an asset snapshot. This can only be set to a timestamp
# between the current time and the current time minus 35 days (inclusive). If
# not specified, the current time will be used. Due to delays in resource data
# collection and indexing, there is a volatile window during which running the
# same query may get different results.
# Corresponds to the JSON property `readTime`
# @return [String]
attr_accessor :read_time
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@asset_types = args[:asset_types] if args.key?(:asset_types)
@content_type = args[:content_type] if args.key?(:content_type)
@output_config = args[:output_config] if args.key?(:output_config)
@read_time = args[:read_time] if args.key?(:read_time)
end
end
# Represents a textual expression in the Common Expression Language (CEL) syntax.
# CEL is a C-like expression language. The syntax and semantics of CEL are
# documented at https://github.com/google/cel-spec. Example (Comparison): title:
# "Summary size limit" description: "Determines if a summary is less than 100
# chars" expression: "document.summary.size() < 100" Example (Equality): title: "
# Requestor is owner" description: "Determines if requestor is the document
# owner" expression: "document.owner == request.auth.claims.email" Example (
# Logic): title: "Public documents" description: "Determine whether the document
# should be publicly visible" expression: "document.type != 'private' &&
# document.type != 'internal'" Example (Data Manipulation): title: "Notification
# string" description: "Create a notification string with a timestamp."
# expression: "'New message received at ' + string(document.create_time)" The
# exact variables and functions that may be referenced within an expression are
# determined by the service that evaluates it. See the service documentation for
# additional information.
class Expr
include Google::Apis::Core::Hashable
# Optional. Description of the expression. This is a longer text which describes
# the expression, e.g. when hovered over it in a UI.
# Corresponds to the JSON property `description`
# @return [String]
attr_accessor :description
# Textual representation of an expression in Common Expression Language syntax.
# Corresponds to the JSON property `expression`
# @return [String]
attr_accessor :expression
# Optional. String indicating the location of the expression for error reporting,
# e.g. a file name and a position in the file.
# Corresponds to the JSON property `location`
# @return [String]
attr_accessor :location
# Optional. Title for the expression, i.e. a short string describing its purpose.
# This can be used e.g. in UIs which allow to enter the expression.
# Corresponds to the JSON property `title`
# @return [String]
attr_accessor :title
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@description = args[:description] if args.key?(:description)
@expression = args[:expression] if args.key?(:expression)
@location = args[:location] if args.key?(:location)
@title = args[:title] if args.key?(:title)
end
end
# An asset feed used to export asset updates to a destinations. An asset feed
# filter controls what updates are exported. The asset feed must be created
# within a project, organization, or folder. Supported destinations are: Pub/Sub
# topics.
class Feed
include Google::Apis::Core::Hashable
# A list of the full names of the assets to receive updates. You must specify
# either or both of asset_names and asset_types. Only asset updates matching
# specified asset_names or asset_types are exported to the feed. Example: `//
# compute.googleapis.com/projects/my_project_123/zones/zone1/instances/instance1`
# . See [Resource Names](https://cloud.google.com/apis/design/resource_names#
# full_resource_name) for more info.
# Corresponds to the JSON property `assetNames`
# @return [Array<String>]
attr_accessor :asset_names
# A list of types of the assets to receive updates. You must specify either or
# both of asset_names and asset_types. Only asset updates matching specified
# asset_names or asset_types are exported to the feed. Example: `"compute.
# googleapis.com/Disk"` See [this topic](https://cloud.google.com/asset-
# inventory/docs/supported-asset-types) for a list of all supported asset types.
# Corresponds to the JSON property `assetTypes`
# @return [Array<String>]
attr_accessor :asset_types
# Represents a textual expression in the Common Expression Language (CEL) syntax.
# CEL is a C-like expression language. The syntax and semantics of CEL are
# documented at https://github.com/google/cel-spec. Example (Comparison): title:
# "Summary size limit" description: "Determines if a summary is less than 100
# chars" expression: "document.summary.size() < 100" Example (Equality): title: "
# Requestor is owner" description: "Determines if requestor is the document
# owner" expression: "document.owner == request.auth.claims.email" Example (
# Logic): title: "Public documents" description: "Determine whether the document
# should be publicly visible" expression: "document.type != 'private' &&
# document.type != 'internal'" Example (Data Manipulation): title: "Notification
# string" description: "Create a notification string with a timestamp."
# expression: "'New message received at ' + string(document.create_time)" The
# exact variables and functions that may be referenced within an expression are
# determined by the service that evaluates it. See the service documentation for
# additional information.
# Corresponds to the JSON property `condition`
# @return [Google::Apis::CloudassetV1::Expr]
attr_accessor :condition
# Asset content type. If not specified, no content but the asset name and type
# will be returned.
# Corresponds to the JSON property `contentType`
# @return [String]
attr_accessor :content_type
# Output configuration for asset feed destination.
# Corresponds to the JSON property `feedOutputConfig`
# @return [Google::Apis::CloudassetV1::FeedOutputConfig]
attr_accessor :feed_output_config
# Required. The format will be projects/`project_number`/feeds/`client-
# assigned_feed_identifier` or folders/`folder_number`/feeds/`client-
# assigned_feed_identifier` or organizations/`organization_number`/feeds/`client-
# assigned_feed_identifier` The client-assigned feed identifier must be unique
# within the parent project/folder/organization.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@asset_names = args[:asset_names] if args.key?(:asset_names)
@asset_types = args[:asset_types] if args.key?(:asset_types)
@condition = args[:condition] if args.key?(:condition)
@content_type = args[:content_type] if args.key?(:content_type)
@feed_output_config = args[:feed_output_config] if args.key?(:feed_output_config)
@name = args[:name] if args.key?(:name)
end
end
# Output configuration for asset feed destination.
class FeedOutputConfig
include Google::Apis::Core::Hashable
# A Pub/Sub destination.
# Corresponds to the JSON property `pubsubDestination`
# @return [Google::Apis::CloudassetV1::PubsubDestination]
attr_accessor :pubsub_destination
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@pubsub_destination = args[:pubsub_destination] if args.key?(:pubsub_destination)
end
end
# A Cloud Storage location.
class GcsDestination
include Google::Apis::Core::Hashable
# The uri of the Cloud Storage object. It's the same uri that is used by gsutil.
# Example: "gs://bucket_name/object_name". See [Viewing and Editing Object
# Metadata](https://cloud.google.com/storage/docs/viewing-editing-metadata) for
# more information.
# Corresponds to the JSON property `uri`
# @return [String]
attr_accessor :uri
# The uri prefix of all generated Cloud Storage objects. Example: "gs://
# bucket_name/object_name_prefix". Each object uri is in format: "gs://
# bucket_name/object_name_prefix// and only contains assets for that type.
# starts from 0. Example: "gs://bucket_name/object_name_prefix/compute.
# googleapis.com/Disk/0" is the first shard of output objects containing all
# compute.googleapis.com/Disk assets. An INVALID_ARGUMENT error will be returned
# if file with the same name "gs://bucket_name/object_name_prefix" already
# exists.
# Corresponds to the JSON property `uriPrefix`
# @return [String]
attr_accessor :uri_prefix
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@uri = args[:uri] if args.key?(:uri)
@uri_prefix = args[:uri_prefix] if args.key?(:uri_prefix)
end
end
# An IAM role or permission under analysis.
class GoogleCloudAssetV1Access
include Google::Apis::Core::Hashable
# Represents the detailed state of an entity under analysis, such as a resource,
# an identity or an access.
# Corresponds to the JSON property `analysisState`
# @return [Google::Apis::CloudassetV1::IamPolicyAnalysisState]
attr_accessor :analysis_state
# The permission.
# Corresponds to the JSON property `permission`
# @return [String]
attr_accessor :permission
# The role.
# Corresponds to the JSON property `role`
# @return [String]
attr_accessor :role
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@analysis_state = args[:analysis_state] if args.key?(:analysis_state)
@permission = args[:permission] if args.key?(:permission)
@role = args[:role] if args.key?(:role)
end
end
# An access control list, derived from the above IAM policy binding, which
# contains a set of resources and accesses. May include one item from each set
# to compose an access control entry. NOTICE that there could be multiple access
# control lists for one IAM policy binding. The access control lists are created
# based on resource and access combinations. For example, assume we have the
# following cases in one IAM policy binding: - Permission P1 and P2 apply to
# resource R1 and R2; - Permission P3 applies to resource R2 and R3; This will
# result in the following access control lists: - AccessControlList 1: [R1, R2],
# [P1, P2] - AccessControlList 2: [R2, R3], [P3]
class GoogleCloudAssetV1AccessControlList
include Google::Apis::Core::Hashable
# The accesses that match one of the following conditions: - The access_selector,
# if it is specified in request; - Otherwise, access specifiers reachable from
# the policy binding's role.
# Corresponds to the JSON property `accesses`
# @return [Array<Google::Apis::CloudassetV1::GoogleCloudAssetV1Access>]
attr_accessor :accesses
# Resource edges of the graph starting from the policy attached resource to any
# descendant resources. The Edge.source_node contains the full resource name of
# a parent resource and Edge.target_node contains the full resource name of a
# child resource. This field is present only if the output_resource_edges option
# is enabled in request.
# Corresponds to the JSON property `resourceEdges`
# @return [Array<Google::Apis::CloudassetV1::GoogleCloudAssetV1Edge>]
attr_accessor :resource_edges
# The resources that match one of the following conditions: - The
# resource_selector, if it is specified in request; - Otherwise, resources
# reachable from the policy attached resource.
# Corresponds to the JSON property `resources`
# @return [Array<Google::Apis::CloudassetV1::GoogleCloudAssetV1Resource>]
attr_accessor :resources
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@accesses = args[:accesses] if args.key?(:accesses)
@resource_edges = args[:resource_edges] if args.key?(:resource_edges)
@resources = args[:resources] if args.key?(:resources)
end
end
# A BigQuery destination.
class GoogleCloudAssetV1BigQueryDestination
include Google::Apis::Core::Hashable
# Required. The BigQuery dataset in format "projects/projectId/datasets/
# datasetId", to which the analysis results should be exported. If this dataset
# does not exist, the export call will return an INVALID_ARGUMENT error.
# Corresponds to the JSON property `dataset`
# @return [String]
attr_accessor :dataset
# The partition key for BigQuery partitioned table.
# Corresponds to the JSON property `partitionKey`
# @return [String]
attr_accessor :partition_key
# Required. The prefix of the BigQuery tables to which the analysis results will
# be written. Tables will be created based on this table_prefix if not exist: *
# _analysis table will contain export operation's metadata. * _analysis_result
# will contain all the IamPolicyAnalysisResult. When [partition_key] is
# specified, both tables will be partitioned based on the [partition_key].
# Corresponds to the JSON property `tablePrefix`
# @return [String]
attr_accessor :table_prefix
# Optional. Specifies the action that occurs if the destination table or
# partition already exists. The following values are supported: * WRITE_TRUNCATE:
# If the table or partition already exists, BigQuery overwrites the entire
# table or all the partitions data. * WRITE_APPEND: If the table or partition
# already exists, BigQuery appends the data to the table or the latest partition.
# * WRITE_EMPTY: If the table already exists and contains data, an error is
# returned. The default value is WRITE_APPEND. Each action is atomic and only
# occurs if BigQuery is able to complete the job successfully. Details are at
# https://cloud.google.com/bigquery/docs/loading-data-local#
# appending_to_or_overwriting_a_table_using_a_local_file.
# Corresponds to the JSON property `writeDisposition`
# @return [String]
attr_accessor :write_disposition
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@dataset = args[:dataset] if args.key?(:dataset)
@partition_key = args[:partition_key] if args.key?(:partition_key)
@table_prefix = args[:table_prefix] if args.key?(:table_prefix)
@write_disposition = args[:write_disposition] if args.key?(:write_disposition)
end
end
# A directional edge.
class GoogleCloudAssetV1Edge
include Google::Apis::Core::Hashable
# The source node of the edge. For example, it could be a full resource name for
# a resource node or an email of an identity.
# Corresponds to the JSON property `sourceNode`
# @return [String]
attr_accessor :source_node
# The target node of the edge. For example, it could be a full resource name for
# a resource node or an email of an identity.
# Corresponds to the JSON property `targetNode`
# @return [String]
attr_accessor :target_node
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@source_node = args[:source_node] if args.key?(:source_node)
@target_node = args[:target_node] if args.key?(:target_node)
end
end
# A Cloud Storage location.
class GoogleCloudAssetV1GcsDestination
include Google::Apis::Core::Hashable
# Required. The uri of the Cloud Storage object. It's the same uri that is used
# by gsutil. For example: "gs://bucket_name/object_name". See [Quickstart: Using
# the gsutil tool] (https://cloud.google.com/storage/docs/quickstart-gsutil) for
# examples.
# Corresponds to the JSON property `uri`
# @return [String]
attr_accessor :uri
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@uri = args[:uri] if args.key?(:uri)
end
end
# An identity under analysis.
class GoogleCloudAssetV1Identity
include Google::Apis::Core::Hashable
# Represents the detailed state of an entity under analysis, such as a resource,
# an identity or an access.
# Corresponds to the JSON property `analysisState`
# @return [Google::Apis::CloudassetV1::IamPolicyAnalysisState]
attr_accessor :analysis_state
# The identity name in any form of members appear in [IAM policy binding](https:/
# /cloud.google.com/iam/reference/rest/v1/Binding), such as: - user:foo@google.
# com - group:group1@google.com - serviceAccount:s1@prj1.iam.gserviceaccount.com
# - projectOwner:some_project_id - domain:google.com - allUsers - etc.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@analysis_state = args[:analysis_state] if args.key?(:analysis_state)
@name = args[:name] if args.key?(:name)
end
end
# The identities and group edges.
class GoogleCloudAssetV1IdentityList
include Google::Apis::Core::Hashable
# Group identity edges of the graph starting from the binding's group members to
# any node of the identities. The Edge.source_node contains a group, such as `
# group:parent@google.com`. The Edge.target_node contains a member of the group,
# such as `group:child@google.com` or `user:foo@google.com`. This field is
# present only if the output_group_edges option is enabled in request.
# Corresponds to the JSON property `groupEdges`
# @return [Array<Google::Apis::CloudassetV1::GoogleCloudAssetV1Edge>]
attr_accessor :group_edges
# Only the identities that match one of the following conditions will be
# presented: - The identity_selector, if it is specified in request; - Otherwise,
# identities reachable from the policy binding's members.
# Corresponds to the JSON property `identities`
# @return [Array<Google::Apis::CloudassetV1::GoogleCloudAssetV1Identity>]
attr_accessor :identities
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@group_edges = args[:group_edges] if args.key?(:group_edges)
@identities = args[:identities] if args.key?(:identities)
end
end
# A Google Cloud resource under analysis.
class GoogleCloudAssetV1Resource
include Google::Apis::Core::Hashable
# Represents the detailed state of an entity under analysis, such as a resource,
# an identity or an access.
# Corresponds to the JSON property `analysisState`
# @return [Google::Apis::CloudassetV1::IamPolicyAnalysisState]
attr_accessor :analysis_state
# The [full resource name](https://cloud.google.com/asset-inventory/docs/
# resource-name-format)
# Corresponds to the JSON property `fullResourceName`
# @return [String]
attr_accessor :full_resource_name
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@analysis_state = args[:analysis_state] if args.key?(:analysis_state)
@full_resource_name = args[:full_resource_name] if args.key?(:full_resource_name)
end
end
# Used in `policy_type` to specify how `boolean_policy` will behave at this
# resource.
class GoogleCloudOrgpolicyV1BooleanPolicy
include Google::Apis::Core::Hashable
# If `true`, then the `Policy` is enforced. If `false`, then any configuration
# is acceptable. Suppose you have a `Constraint` `constraints/compute.
# disableSerialPortAccess` with `constraint_default` set to `ALLOW`. A `Policy`
# for that `Constraint` exhibits the following behavior: - If the `Policy` at
# this resource has enforced set to `false`, serial port connection attempts
# will be allowed. - If the `Policy` at this resource has enforced set to `true`,
# serial port connection attempts will be refused. - If the `Policy` at this
# resource is `RestoreDefault`, serial port connection attempts will be allowed.
# - If no `Policy` is set at this resource or anywhere higher in the resource
# hierarchy, serial port connection attempts will be allowed. - If no `Policy`
# is set at this resource, but one exists higher in the resource hierarchy, the
# behavior is as if the`Policy` were set at this resource. The following
# examples demonstrate the different possible layerings: Example 1 (nearest `
# Constraint` wins): `organizations/foo` has a `Policy` with: `enforced: false` `
# projects/bar` has no `Policy` set. The constraint at `projects/bar` and `
# organizations/foo` will not be enforced. Example 2 (enforcement gets replaced):
# `organizations/foo` has a `Policy` with: `enforced: false` `projects/bar` has
# a `Policy` with: `enforced: true` The constraint at `organizations/foo` is not
# enforced. The constraint at `projects/bar` is enforced. Example 3 (
# RestoreDefault): `organizations/foo` has a `Policy` with: `enforced: true` `
# projects/bar` has a `Policy` with: `RestoreDefault: ``` The constraint at `
# organizations/foo` is enforced. The constraint at `projects/bar` is not
# enforced, because `constraint_default` for the `Constraint` is `ALLOW`.
# Corresponds to the JSON property `enforced`
# @return [Boolean]
attr_accessor :enforced
alias_method :enforced?, :enforced
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@enforced = args[:enforced] if args.key?(:enforced)
end
end
# Used in `policy_type` to specify how `list_policy` behaves at this resource. `
# ListPolicy` can define specific values and subtrees of Cloud Resource Manager
# resource hierarchy (`Organizations`, `Folders`, `Projects`) that are allowed
# or denied by setting the `allowed_values` and `denied_values` fields. This is
# achieved by using the `under:` and optional `is:` prefixes. The `under:`
# prefix is used to denote resource subtree values. The `is:` prefix is used to
# denote specific values, and is required only if the value contains a ":".
# Values prefixed with "is:" are treated the same as values with no prefix.
# Ancestry subtrees must be in one of the following formats: - "projects/", e.g.
# "projects/tokyo-rain-123" - "folders/", e.g. "folders/1234" - "organizations/",
# e.g. "organizations/1234" The `supports_under` field of the associated `
# Constraint` defines whether ancestry prefixes can be used. You can set `
# allowed_values` and `denied_values` in the same `Policy` if `all_values` is `
# ALL_VALUES_UNSPECIFIED`. `ALLOW` or `DENY` are used to allow or deny all
# values. If `all_values` is set to either `ALLOW` or `DENY`, `allowed_values`
# and `denied_values` must be unset.
class GoogleCloudOrgpolicyV1ListPolicy
include Google::Apis::Core::Hashable
# The policy all_values state.
# Corresponds to the JSON property `allValues`
# @return [String]
attr_accessor :all_values
# List of values allowed at this resource. Can only be set if `all_values` is
# set to `ALL_VALUES_UNSPECIFIED`.
# Corresponds to the JSON property `allowedValues`
# @return [Array<String>]
attr_accessor :allowed_values
# List of values denied at this resource. Can only be set if `all_values` is set
# to `ALL_VALUES_UNSPECIFIED`.
# Corresponds to the JSON property `deniedValues`
# @return [Array<String>]
attr_accessor :denied_values
# Determines the inheritance behavior for this `Policy`. By default, a `
# ListPolicy` set at a resource supersedes any `Policy` set anywhere up the
# resource hierarchy. However, if `inherit_from_parent` is set to `true`, then
# the values from the effective `Policy` of the parent resource are inherited,
# meaning the values set in this `Policy` are added to the values inherited up
# the hierarchy. Setting `Policy` hierarchies that inherit both allowed values
# and denied values isn't recommended in most circumstances to keep the
# configuration simple and understandable. However, it is possible to set a `
# Policy` with `allowed_values` set that inherits a `Policy` with `denied_values`
# set. In this case, the values that are allowed must be in `allowed_values`
# and not present in `denied_values`. For example, suppose you have a `
# Constraint` `constraints/serviceuser.services`, which has a `constraint_type`
# of `list_constraint`, and with `constraint_default` set to `ALLOW`. Suppose
# that at the Organization level, a `Policy` is applied that restricts the
# allowed API activations to ``E1`, `E2``. Then, if a `Policy` is applied to a
# project below the Organization that has `inherit_from_parent` set to `false`
# and field all_values set to DENY, then an attempt to activate any API will be
# denied. The following examples demonstrate different possible layerings for `
# projects/bar` parented by `organizations/foo`: Example 1 (no inherited values):
# `organizations/foo` has a `Policy` with values: `allowed_values: "E1"
# allowed_values:"E2"` `projects/bar` has `inherit_from_parent` `false` and
# values: `allowed_values: "E3" allowed_values: "E4"` The accepted values at `
# organizations/foo` are `E1`, `E2`. The accepted values at `projects/bar` are `
# E3`, and `E4`. Example 2 (inherited values): `organizations/foo` has a `Policy`
# with values: `allowed_values: "E1" allowed_values:"E2"` `projects/bar` has a `
# Policy` with values: `value: "E3" value: "E4" inherit_from_parent: true` The
# accepted values at `organizations/foo` are `E1`, `E2`. The accepted values at `
# projects/bar` are `E1`, `E2`, `E3`, and `E4`. Example 3 (inheriting both
# allowed and denied values): `organizations/foo` has a `Policy` with values: `
# allowed_values: "E1" allowed_values: "E2"` `projects/bar` has a `Policy` with:
# `denied_values: "E1"` The accepted values at `organizations/foo` are `E1`, `E2`
# . The value accepted at `projects/bar` is `E2`. Example 4 (RestoreDefault): `
# organizations/foo` has a `Policy` with values: `allowed_values: "E1"
# allowed_values:"E2"` `projects/bar` has a `Policy` with values: `
# RestoreDefault: ``` The accepted values at `organizations/foo` are `E1`, `E2`.
# The accepted values at `projects/bar` are either all or none depending on the
# value of `constraint_default` (if `ALLOW`, all; if `DENY`, none). Example 5 (
# no policy inherits parent policy): `organizations/foo` has no `Policy` set. `
# projects/bar` has no `Policy` set. The accepted values at both levels are
# either all or none depending on the value of `constraint_default` (if `ALLOW`,
# all; if `DENY`, none). Example 6 (ListConstraint allowing all): `organizations/
# foo` has a `Policy` with values: `allowed_values: "E1" allowed_values: "E2"` `
# projects/bar` has a `Policy` with: `all: ALLOW` The accepted values at `
# organizations/foo` are `E1`, E2`. Any value is accepted at `projects/bar`.
# Example 7 (ListConstraint allowing none): `organizations/foo` has a `Policy`
# with values: `allowed_values: "E1" allowed_values: "E2"` `projects/bar` has a `
# Policy` with: `all: DENY` The accepted values at `organizations/foo` are `E1`,
# E2`. No value is accepted at `projects/bar`. Example 10 (allowed and denied
# subtrees of Resource Manager hierarchy): Given the following resource
# hierarchy O1->`F1, F2`; F1->`P1`; F2->`P2, P3`, `organizations/foo` has a `
# Policy` with values: `allowed_values: "under:organizations/O1"` `projects/bar`
# has a `Policy` with: `allowed_values: "under:projects/P3"` `denied_values: "
# under:folders/F2"` The accepted values at `organizations/foo` are `
# organizations/O1`, `folders/F1`, `folders/F2`, `projects/P1`, `projects/P2`, `
# projects/P3`. The accepted values at `projects/bar` are `organizations/O1`, `
# folders/F1`, `projects/P1`.
# Corresponds to the JSON property `inheritFromParent`
# @return [Boolean]
attr_accessor :inherit_from_parent
alias_method :inherit_from_parent?, :inherit_from_parent
# Optional. The Google Cloud Console will try to default to a configuration that
# matches the value specified in this `Policy`. If `suggested_value` is not set,
# it will inherit the value specified higher in the hierarchy, unless `
# inherit_from_parent` is `false`.
# Corresponds to the JSON property `suggestedValue`
# @return [String]
attr_accessor :suggested_value
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@all_values = args[:all_values] if args.key?(:all_values)
@allowed_values = args[:allowed_values] if args.key?(:allowed_values)
@denied_values = args[:denied_values] if args.key?(:denied_values)
@inherit_from_parent = args[:inherit_from_parent] if args.key?(:inherit_from_parent)
@suggested_value = args[:suggested_value] if args.key?(:suggested_value)
end
end
# Defines a Cloud Organization `Policy` which is used to specify `Constraints`
# for configurations of Cloud Platform resources.
class GoogleCloudOrgpolicyV1Policy
include Google::Apis::Core::Hashable
# Used in `policy_type` to specify how `boolean_policy` will behave at this
# resource.
# Corresponds to the JSON property `booleanPolicy`
# @return [Google::Apis::CloudassetV1::GoogleCloudOrgpolicyV1BooleanPolicy]
attr_accessor :boolean_policy
# The name of the `Constraint` the `Policy` is configuring, for example, `
# constraints/serviceuser.services`. A [list of available constraints](/resource-
# manager/docs/organization-policy/org-policy-constraints) is available.
# Immutable after creation.
# Corresponds to the JSON property `constraint`
# @return [String]
attr_accessor :constraint
# An opaque tag indicating the current version of the `Policy`, used for
# concurrency control. When the `Policy` is returned from either a `GetPolicy`
# or a `ListOrgPolicy` request, this `etag` indicates the version of the current
# `Policy` to use when executing a read-modify-write loop. When the `Policy` is
# returned from a `GetEffectivePolicy` request, the `etag` will be unset. When
# the `Policy` is used in a `SetOrgPolicy` method, use the `etag` value that was
# returned from a `GetOrgPolicy` request as part of a read-modify-write loop for
# concurrency control. Not setting the `etag`in a `SetOrgPolicy` request will
# result in an unconditional write of the `Policy`.
# Corresponds to the JSON property `etag`
# NOTE: Values are automatically base64 encoded/decoded in the client library.
# @return [String]
attr_accessor :etag
# Used in `policy_type` to specify how `list_policy` behaves at this resource. `
# ListPolicy` can define specific values and subtrees of Cloud Resource Manager
# resource hierarchy (`Organizations`, `Folders`, `Projects`) that are allowed
# or denied by setting the `allowed_values` and `denied_values` fields. This is
# achieved by using the `under:` and optional `is:` prefixes. The `under:`
# prefix is used to denote resource subtree values. The `is:` prefix is used to
# denote specific values, and is required only if the value contains a ":".
# Values prefixed with "is:" are treated the same as values with no prefix.
# Ancestry subtrees must be in one of the following formats: - "projects/", e.g.
# "projects/tokyo-rain-123" - "folders/", e.g. "folders/1234" - "organizations/",
# e.g. "organizations/1234" The `supports_under` field of the associated `
# Constraint` defines whether ancestry prefixes can be used. You can set `
# allowed_values` and `denied_values` in the same `Policy` if `all_values` is `
# ALL_VALUES_UNSPECIFIED`. `ALLOW` or `DENY` are used to allow or deny all
# values. If `all_values` is set to either `ALLOW` or `DENY`, `allowed_values`
# and `denied_values` must be unset.
# Corresponds to the JSON property `listPolicy`
# @return [Google::Apis::CloudassetV1::GoogleCloudOrgpolicyV1ListPolicy]
attr_accessor :list_policy
# Ignores policies set above this resource and restores the `constraint_default`
# enforcement behavior of the specific `Constraint` at this resource. Suppose
# that `constraint_default` is set to `ALLOW` for the `Constraint` `constraints/
# serviceuser.services`. Suppose that organization foo.com sets a `Policy` at
# their Organization resource node that restricts the allowed service
# activations to deny all service activations. They could then set a `Policy`
# with the `policy_type` `restore_default` on several experimental projects,
# restoring the `constraint_default` enforcement of the `Constraint` for only
# those projects, allowing those projects to have all services activated.
# Corresponds to the JSON property `restoreDefault`
# @return [Google::Apis::CloudassetV1::GoogleCloudOrgpolicyV1RestoreDefault]
attr_accessor :restore_default
# The time stamp the `Policy` was previously updated. This is set by the server,
# not specified by the caller, and represents the last time a call to `
# SetOrgPolicy` was made for that `Policy`. Any value set by the client will be
# ignored.
# Corresponds to the JSON property `updateTime`
# @return [String]
attr_accessor :update_time
# Version of the `Policy`. Default version is 0;
# Corresponds to the JSON property `version`
# @return [Fixnum]
attr_accessor :version
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@boolean_policy = args[:boolean_policy] if args.key?(:boolean_policy)
@constraint = args[:constraint] if args.key?(:constraint)
@etag = args[:etag] if args.key?(:etag)
@list_policy = args[:list_policy] if args.key?(:list_policy)
@restore_default = args[:restore_default] if args.key?(:restore_default)
@update_time = args[:update_time] if args.key?(:update_time)
@version = args[:version] if args.key?(:version)
end
end
# Ignores policies set above this resource and restores the `constraint_default`
# enforcement behavior of the specific `Constraint` at this resource. Suppose
# that `constraint_default` is set to `ALLOW` for the `Constraint` `constraints/
# serviceuser.services`. Suppose that organization foo.com sets a `Policy` at
# their Organization resource node that restricts the allowed service
# activations to deny all service activations. They could then set a `Policy`
# with the `policy_type` `restore_default` on several experimental projects,
# restoring the `constraint_default` enforcement of the `Constraint` for only
# those projects, allowing those projects to have all services activated.
class GoogleCloudOrgpolicyV1RestoreDefault
include Google::Apis::Core::Hashable
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
end
end
# An `AccessLevel` is a label that can be applied to requests to Google Cloud
# services, along with a list of requirements necessary for the label to be
# applied.
class GoogleIdentityAccesscontextmanagerV1AccessLevel
include Google::Apis::Core::Hashable
# `BasicLevel` is an `AccessLevel` using a set of recommended features.
# Corresponds to the JSON property `basic`
# @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1BasicLevel]
attr_accessor :basic
# `CustomLevel` is an `AccessLevel` using the Cloud Common Expression Language
# to represent the necessary conditions for the level to apply to a request. See
# CEL spec at: https://github.com/google/cel-spec
# Corresponds to the JSON property `custom`
# @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1CustomLevel]
attr_accessor :custom
# Description of the `AccessLevel` and its use. Does not affect behavior.
# Corresponds to the JSON property `description`
# @return [String]
attr_accessor :description
# Required. Resource name for the Access Level. The `short_name` component must
# begin with a letter and only include alphanumeric and '_'. Format: `
# accessPolicies/`policy_id`/accessLevels/`short_name``. The maximum length of
# the `short_name` component is 50 characters.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# Human readable title. Must be unique within the Policy.
# Corresponds to the JSON property `title`
# @return [String]
attr_accessor :title
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@basic = args[:basic] if args.key?(:basic)
@custom = args[:custom] if args.key?(:custom)
@description = args[:description] if args.key?(:description)
@name = args[:name] if args.key?(:name)
@title = args[:title] if args.key?(:title)
end
end
# `AccessPolicy` is a container for `AccessLevels` (which define the necessary
# attributes to use Google Cloud services) and `ServicePerimeters` (which define
# regions of services able to freely pass data within a perimeter). An access
# policy is globally visible within an organization, and the restrictions it
# specifies apply to all projects within an organization.
class GoogleIdentityAccesscontextmanagerV1AccessPolicy
include Google::Apis::Core::Hashable
# Output only. An opaque identifier for the current version of the `AccessPolicy`
# . This will always be a strongly validated etag, meaning that two Access
# Polices will be identical if and only if their etags are identical. Clients
# should not expect this to be in any specific format.
# Corresponds to the JSON property `etag`
# @return [String]
attr_accessor :etag
# Output only. Resource name of the `AccessPolicy`. Format: `accessPolicies/`
# policy_id``
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# Required. The parent of this `AccessPolicy` in the Cloud Resource Hierarchy.
# Currently immutable once created. Format: `organizations/`organization_id``
# Corresponds to the JSON property `parent`
# @return [String]
attr_accessor :parent
# Required. Human readable title. Does not affect behavior.
# Corresponds to the JSON property `title`
# @return [String]
attr_accessor :title
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@etag = args[:etag] if args.key?(:etag)
@name = args[:name] if args.key?(:name)
@parent = args[:parent] if args.key?(:parent)
@title = args[:title] if args.key?(:title)
end
end
# Identification for an API Operation.
class GoogleIdentityAccesscontextmanagerV1ApiOperation
include Google::Apis::Core::Hashable
# API methods or permissions to allow. Method or permission must belong to the
# service specified by `service_name` field. A single MethodSelector entry with `
# *` specified for the `method` field will allow all methods AND permissions for
# the service specified in `service_name`.
# Corresponds to the JSON property `methodSelectors`
# @return [Array<Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1MethodSelector>]
attr_accessor :method_selectors
# The name of the API whose methods or permissions the IngressPolicy or
# EgressPolicy want to allow. A single ApiOperation with `service_name` field
# set to `*` will allow all methods AND permissions for all services.
# Corresponds to the JSON property `serviceName`
# @return [String]
attr_accessor :service_name
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@method_selectors = args[:method_selectors] if args.key?(:method_selectors)
@service_name = args[:service_name] if args.key?(:service_name)
end
end
# `BasicLevel` is an `AccessLevel` using a set of recommended features.
class GoogleIdentityAccesscontextmanagerV1BasicLevel
include Google::Apis::Core::Hashable
# How the `conditions` list should be combined to determine if a request is
# granted this `AccessLevel`. If AND is used, each `Condition` in `conditions`
# must be satisfied for the `AccessLevel` to be applied. If OR is used, at least
# one `Condition` in `conditions` must be satisfied for the `AccessLevel` to be
# applied. Default behavior is AND.
# Corresponds to the JSON property `combiningFunction`
# @return [String]
attr_accessor :combining_function
# Required. A list of requirements for the `AccessLevel` to be granted.
# Corresponds to the JSON property `conditions`
# @return [Array<Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1Condition>]
attr_accessor :conditions
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@combining_function = args[:combining_function] if args.key?(:combining_function)
@conditions = args[:conditions] if args.key?(:conditions)
end
end
# A condition necessary for an `AccessLevel` to be granted. The Condition is an
# AND over its fields. So a Condition is true if: 1) the request IP is from one
# of the listed subnetworks AND 2) the originating device complies with the
# listed device policy AND 3) all listed access levels are granted AND 4) the
# request was sent at a time allowed by the DateTimeRestriction.
class GoogleIdentityAccesscontextmanagerV1Condition
include Google::Apis::Core::Hashable
# `DevicePolicy` specifies device specific restrictions necessary to acquire a
# given access level. A `DevicePolicy` specifies requirements for requests from
# devices to be granted access levels, it does not do any enforcement on the
# device. `DevicePolicy` acts as an AND over all specified fields, and each
# repeated field is an OR over its elements. Any unset fields are ignored. For
# example, if the proto is ` os_type : DESKTOP_WINDOWS, os_type : DESKTOP_LINUX,
# encryption_status: ENCRYPTED`, then the DevicePolicy will be true for requests
# originating from encrypted Linux desktops and encrypted Windows desktops.
# Corresponds to the JSON property `devicePolicy`
# @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1DevicePolicy]
attr_accessor :device_policy
# CIDR block IP subnetwork specification. May be IPv4 or IPv6. Note that for a
# CIDR IP address block, the specified IP address portion must be properly
# truncated (i.e. all the host bits must be zero) or the input is considered
# malformed. For example, "192.0.2.0/24" is accepted but "192.0.2.1/24" is not.
# Similarly, for IPv6, "2001:db8::/32" is accepted whereas "2001:db8::1/32" is
# not. The originating IP of a request must be in one of the listed subnets in
# order for this Condition to be true. If empty, all IP addresses are allowed.
# Corresponds to the JSON property `ipSubnetworks`
# @return [Array<String>]
attr_accessor :ip_subnetworks
# The request must be made by one of the provided user or service accounts.
# Groups are not supported. Syntax: `user:`emailid`` `serviceAccount:`emailid``
# If not specified, a request may come from any user.
# Corresponds to the JSON property `members`
# @return [Array<String>]
attr_accessor :members
# Whether to negate the Condition. If true, the Condition becomes a NAND over
# its non-empty fields, each field must be false for the Condition overall to be
# satisfied. Defaults to false.
# Corresponds to the JSON property `negate`
# @return [Boolean]
attr_accessor :negate
alias_method :negate?, :negate
# The request must originate from one of the provided countries/regions. Must be
# valid ISO 3166-1 alpha-2 codes.
# Corresponds to the JSON property `regions`
# @return [Array<String>]
attr_accessor :regions
# A list of other access levels defined in the same `Policy`, referenced by
# resource name. Referencing an `AccessLevel` which does not exist is an error.
# All access levels listed must be granted for the Condition to be true. Example:
# "`accessPolicies/MY_POLICY/accessLevels/LEVEL_NAME"`
# Corresponds to the JSON property `requiredAccessLevels`
# @return [Array<String>]
attr_accessor :required_access_levels
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@device_policy = args[:device_policy] if args.key?(:device_policy)
@ip_subnetworks = args[:ip_subnetworks] if args.key?(:ip_subnetworks)
@members = args[:members] if args.key?(:members)
@negate = args[:negate] if args.key?(:negate)
@regions = args[:regions] if args.key?(:regions)
@required_access_levels = args[:required_access_levels] if args.key?(:required_access_levels)
end
end
# `CustomLevel` is an `AccessLevel` using the Cloud Common Expression Language
# to represent the necessary conditions for the level to apply to a request. See
# CEL spec at: https://github.com/google/cel-spec
class GoogleIdentityAccesscontextmanagerV1CustomLevel
include Google::Apis::Core::Hashable
# Represents a textual expression in the Common Expression Language (CEL) syntax.
# CEL is a C-like expression language. The syntax and semantics of CEL are
# documented at https://github.com/google/cel-spec. Example (Comparison): title:
# "Summary size limit" description: "Determines if a summary is less than 100
# chars" expression: "document.summary.size() < 100" Example (Equality): title: "
# Requestor is owner" description: "Determines if requestor is the document
# owner" expression: "document.owner == request.auth.claims.email" Example (
# Logic): title: "Public documents" description: "Determine whether the document
# should be publicly visible" expression: "document.type != 'private' &&
# document.type != 'internal'" Example (Data Manipulation): title: "Notification
# string" description: "Create a notification string with a timestamp."
# expression: "'New message received at ' + string(document.create_time)" The
# exact variables and functions that may be referenced within an expression are
# determined by the service that evaluates it. See the service documentation for
# additional information.
# Corresponds to the JSON property `expr`
# @return [Google::Apis::CloudassetV1::Expr]
attr_accessor :expr
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@expr = args[:expr] if args.key?(:expr)
end
end
# `DevicePolicy` specifies device specific restrictions necessary to acquire a
# given access level. A `DevicePolicy` specifies requirements for requests from
# devices to be granted access levels, it does not do any enforcement on the
# device. `DevicePolicy` acts as an AND over all specified fields, and each
# repeated field is an OR over its elements. Any unset fields are ignored. For
# example, if the proto is ` os_type : DESKTOP_WINDOWS, os_type : DESKTOP_LINUX,
# encryption_status: ENCRYPTED`, then the DevicePolicy will be true for requests
# originating from encrypted Linux desktops and encrypted Windows desktops.
class GoogleIdentityAccesscontextmanagerV1DevicePolicy
include Google::Apis::Core::Hashable
# Allowed device management levels, an empty list allows all management levels.
# Corresponds to the JSON property `allowedDeviceManagementLevels`
# @return [Array<String>]
attr_accessor :allowed_device_management_levels
# Allowed encryptions statuses, an empty list allows all statuses.
# Corresponds to the JSON property `allowedEncryptionStatuses`
# @return [Array<String>]
attr_accessor :allowed_encryption_statuses
# Allowed OS versions, an empty list allows all types and all versions.
# Corresponds to the JSON property `osConstraints`
# @return [Array<Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1OsConstraint>]
attr_accessor :os_constraints
# Whether the device needs to be approved by the customer admin.
# Corresponds to the JSON property `requireAdminApproval`
# @return [Boolean]
attr_accessor :require_admin_approval
alias_method :require_admin_approval?, :require_admin_approval
# Whether the device needs to be corp owned.
# Corresponds to the JSON property `requireCorpOwned`
# @return [Boolean]
attr_accessor :require_corp_owned
alias_method :require_corp_owned?, :require_corp_owned
# Whether or not screenlock is required for the DevicePolicy to be true.
# Defaults to `false`.
# Corresponds to the JSON property `requireScreenlock`
# @return [Boolean]
attr_accessor :require_screenlock
alias_method :require_screenlock?, :require_screenlock
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@allowed_device_management_levels = args[:allowed_device_management_levels] if args.key?(:allowed_device_management_levels)
@allowed_encryption_statuses = args[:allowed_encryption_statuses] if args.key?(:allowed_encryption_statuses)
@os_constraints = args[:os_constraints] if args.key?(:os_constraints)
@require_admin_approval = args[:require_admin_approval] if args.key?(:require_admin_approval)
@require_corp_owned = args[:require_corp_owned] if args.key?(:require_corp_owned)
@require_screenlock = args[:require_screenlock] if args.key?(:require_screenlock)
end
end
# Defines the conditions under which an EgressPolicy matches a request.
# Conditions based on information about the source of the request. Note that if
# the destination of the request is protected by a ServicePerimeter, then that
# ServicePerimeter must have an IngressPolicy which allows access in order for
# this request to succeed.
class GoogleIdentityAccesscontextmanagerV1EgressFrom
include Google::Apis::Core::Hashable
# A list of identities that are allowed access through this [EgressPolicy].
# Should be in the format of email address. The email address should represent
# individual user or service account only.
# Corresponds to the JSON property `identities`
# @return [Array<String>]
attr_accessor :identities
# Specifies the type of identities that are allowed access to outside the
# perimeter. If left unspecified, then members of `identities` field will be
# allowed access.
# Corresponds to the JSON property `identityType`
# @return [String]
attr_accessor :identity_type
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@identities = args[:identities] if args.key?(:identities)
@identity_type = args[:identity_type] if args.key?(:identity_type)
end
end
# Policy for egress from perimeter. EgressPolicies match requests based on `
# egress_from` and `egress_to` stanzas. For an EgressPolicy to match, both `
# egress_from` and `egress_to` stanzas must be matched. If an EgressPolicy
# matches a request, the request is allowed to span the ServicePerimeter
# boundary. For example, an EgressPolicy can be used to allow VMs on networks
# within the ServicePerimeter to access a defined set of projects outside the
# perimeter in certain contexts (e.g. to read data from a Cloud Storage bucket
# or query against a BigQuery dataset). EgressPolicies are concerned with the *
# resources* that a request relates as well as the API services and API actions
# being used. They do not related to the direction of data movement. More
# detailed documentation for this concept can be found in the descriptions of
# EgressFrom and EgressTo.
class GoogleIdentityAccesscontextmanagerV1EgressPolicy
include Google::Apis::Core::Hashable
# Defines the conditions under which an EgressPolicy matches a request.
# Conditions based on information about the source of the request. Note that if
# the destination of the request is protected by a ServicePerimeter, then that
# ServicePerimeter must have an IngressPolicy which allows access in order for
# this request to succeed.
# Corresponds to the JSON property `egressFrom`
# @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1EgressFrom]
attr_accessor :egress_from
# Defines the conditions under which an EgressPolicy matches a request.
# Conditions are based on information about the ApiOperation intended to be
# performed on the `resources` specified. Note that if the destination of the
# request is protected by a ServicePerimeter, then that ServicePerimeter must
# have an IngressPolicy which allows access in order for this request to succeed.
# Corresponds to the JSON property `egressTo`
# @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1EgressTo]
attr_accessor :egress_to
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@egress_from = args[:egress_from] if args.key?(:egress_from)
@egress_to = args[:egress_to] if args.key?(:egress_to)
end
end
# Defines the conditions under which an EgressPolicy matches a request.
# Conditions are based on information about the ApiOperation intended to be
# performed on the `resources` specified. Note that if the destination of the
# request is protected by a ServicePerimeter, then that ServicePerimeter must
# have an IngressPolicy which allows access in order for this request to succeed.
class GoogleIdentityAccesscontextmanagerV1EgressTo
include Google::Apis::Core::Hashable
# A list of ApiOperations that this egress rule applies to. A request matches if
# it contains an operation/service in this list.
# Corresponds to the JSON property `operations`
# @return [Array<Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1ApiOperation>]
attr_accessor :operations
# A list of resources, currently only projects in the form `projects/`, that
# match this to stanza. A request matches if it contains a resource in this list.
# If `*` is specified for resources, then this EgressTo rule will authorize
# access to all resources outside the perimeter.
# Corresponds to the JSON property `resources`
# @return [Array<String>]
attr_accessor :resources
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@operations = args[:operations] if args.key?(:operations)
@resources = args[:resources] if args.key?(:resources)
end
end
# Defines the conditions under which an IngressPolicy matches a request.
# Conditions are based on information about the source of the request.
class GoogleIdentityAccesscontextmanagerV1IngressFrom
include Google::Apis::Core::Hashable
# A list of identities that are allowed access through this ingress policy.
# Should be in the format of email address. The email address should represent
# individual user or service account only.
# Corresponds to the JSON property `identities`
# @return [Array<String>]
attr_accessor :identities
# Specifies the type of identities that are allowed access from outside the
# perimeter. If left unspecified, then members of `identities` field will be
# allowed access.
# Corresponds to the JSON property `identityType`
# @return [String]
attr_accessor :identity_type
# Sources that this IngressPolicy authorizes access from.
# Corresponds to the JSON property `sources`
# @return [Array<Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1IngressSource>]
attr_accessor :sources
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@identities = args[:identities] if args.key?(:identities)
@identity_type = args[:identity_type] if args.key?(:identity_type)
@sources = args[:sources] if args.key?(:sources)
end
end
# Policy for ingress into ServicePerimeter. IngressPolicies match requests based
# on `ingress_from` and `ingress_to` stanzas. For an ingress policy to match,
# both the `ingress_from` and `ingress_to` stanzas must be matched. If an
# IngressPolicy matches a request, the request is allowed through the perimeter
# boundary from outside the perimeter. For example, access from the internet can
# be allowed either based on an AccessLevel or, for traffic hosted on Google
# Cloud, the project of the source network. For access from private networks,
# using the project of the hosting network is required. Individual ingress
# policies can be limited by restricting which services and/or actions they
# match using the `ingress_to` field.
class GoogleIdentityAccesscontextmanagerV1IngressPolicy
include Google::Apis::Core::Hashable
# Defines the conditions under which an IngressPolicy matches a request.
# Conditions are based on information about the source of the request.
# Corresponds to the JSON property `ingressFrom`
# @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1IngressFrom]
attr_accessor :ingress_from
# Defines the conditions under which an IngressPolicy matches a request.
# Conditions are based on information about the ApiOperation intended to be
# performed on the destination of the request.
# Corresponds to the JSON property `ingressTo`
# @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1IngressTo]
attr_accessor :ingress_to
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@ingress_from = args[:ingress_from] if args.key?(:ingress_from)
@ingress_to = args[:ingress_to] if args.key?(:ingress_to)
end
end
# The source that IngressPolicy authorizes access from.
class GoogleIdentityAccesscontextmanagerV1IngressSource
include Google::Apis::Core::Hashable
# An AccessLevel resource name that allow resources within the ServicePerimeters
# to be accessed from the internet. AccessLevels listed must be in the same
# policy as this ServicePerimeter. Referencing a nonexistent AccessLevel will
# cause an error. If no AccessLevel names are listed, resources within the
# perimeter can only be accessed via Google Cloud calls with request origins
# within the perimeter. Example: `accessPolicies/MY_POLICY/accessLevels/MY_LEVEL`
# . If `*` is specified, then all IngressSources will be allowed.
# Corresponds to the JSON property `accessLevel`
# @return [String]
attr_accessor :access_level
# A Google Cloud resource that is allowed to ingress the perimeter. Requests
# from these resources will be allowed to access perimeter data. Currently only
# projects are allowed. Format: `projects/`project_number`` The project may be
# in any Google Cloud organization, not just the organization that the perimeter
# is defined in. `*` is not allowed, the case of allowing all Google Cloud
# resources only is not supported.
# Corresponds to the JSON property `resource`
# @return [String]
attr_accessor :resource
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@access_level = args[:access_level] if args.key?(:access_level)
@resource = args[:resource] if args.key?(:resource)
end
end
# Defines the conditions under which an IngressPolicy matches a request.
# Conditions are based on information about the ApiOperation intended to be
# performed on the destination of the request.
class GoogleIdentityAccesscontextmanagerV1IngressTo
include Google::Apis::Core::Hashable
# A list of ApiOperations the sources specified in corresponding IngressFrom are
# allowed to perform in this ServicePerimeter.
# Corresponds to the JSON property `operations`
# @return [Array<Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1ApiOperation>]
attr_accessor :operations
# A list of resources, currently only projects in the form `projects/`,
# protected by this ServicePerimeter that are allowed to be accessed by sources
# defined in the corresponding IngressFrom. A request matches if it contains a
# resource in this list. If `*` is specified for resources, then this IngressTo
# rule will authorize access to all resources inside the perimeter, provided
# that the request also matches the `operations` field.
# Corresponds to the JSON property `resources`
# @return [Array<String>]
attr_accessor :resources
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@operations = args[:operations] if args.key?(:operations)
@resources = args[:resources] if args.key?(:resources)
end
end
# An allowed method or permission of a service specified in ApiOperation.
class GoogleIdentityAccesscontextmanagerV1MethodSelector
include Google::Apis::Core::Hashable
# Value for `method` should be a valid method name for the corresponding `
# service_name` in ApiOperation. If `*` used as value for `method`, then ALL
# methods and permissions are allowed.
# Corresponds to the JSON property `method`
# @return [String]
attr_accessor :method_prop
# Value for `permission` should be a valid Cloud IAM permission for the
# corresponding `service_name` in ApiOperation.
# Corresponds to the JSON property `permission`
# @return [String]
attr_accessor :permission
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@method_prop = args[:method_prop] if args.key?(:method_prop)
@permission = args[:permission] if args.key?(:permission)
end
end
# A restriction on the OS type and version of devices making requests.
class GoogleIdentityAccesscontextmanagerV1OsConstraint
include Google::Apis::Core::Hashable
# The minimum allowed OS version. If not set, any version of this OS satisfies
# the constraint. Format: `"major.minor.patch"`. Examples: `"10.5.301"`, `"9.2.1"
# `.
# Corresponds to the JSON property `minimumVersion`
# @return [String]
attr_accessor :minimum_version
# Required. The allowed OS type.
# Corresponds to the JSON property `osType`
# @return [String]
attr_accessor :os_type
# Only allows requests from devices with a verified Chrome OS. Verifications
# includes requirements that the device is enterprise-managed, conformant to
# domain policies, and the caller has permission to call the API targeted by the
# request.
# Corresponds to the JSON property `requireVerifiedChromeOs`
# @return [Boolean]
attr_accessor :require_verified_chrome_os
alias_method :require_verified_chrome_os?, :require_verified_chrome_os
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@minimum_version = args[:minimum_version] if args.key?(:minimum_version)
@os_type = args[:os_type] if args.key?(:os_type)
@require_verified_chrome_os = args[:require_verified_chrome_os] if args.key?(:require_verified_chrome_os)
end
end
# `ServicePerimeter` describes a set of Google Cloud resources which can freely
# import and export data amongst themselves, but not export outside of the `
# ServicePerimeter`. If a request with a source within this `ServicePerimeter`
# has a target outside of the `ServicePerimeter`, the request will be blocked.
# Otherwise the request is allowed. There are two types of Service Perimeter -
# Regular and Bridge. Regular Service Perimeters cannot overlap, a single Google
# Cloud project can only belong to a single regular Service Perimeter. Service
# Perimeter Bridges can contain only Google Cloud projects as members, a single
# Google Cloud project may belong to multiple Service Perimeter Bridges.
class GoogleIdentityAccesscontextmanagerV1ServicePerimeter
include Google::Apis::Core::Hashable
# Description of the `ServicePerimeter` and its use. Does not affect behavior.
# Corresponds to the JSON property `description`
# @return [String]
attr_accessor :description
# Required. Resource name for the ServicePerimeter. The `short_name` component
# must begin with a letter and only include alphanumeric and '_'. Format: `
# accessPolicies/`policy_id`/servicePerimeters/`short_name``
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# Perimeter type indicator. A single project is allowed to be a member of single
# regular perimeter, but multiple service perimeter bridges. A project cannot be
# a included in a perimeter bridge without being included in regular perimeter.
# For perimeter bridges, the restricted service list as well as access level
# lists must be empty.
# Corresponds to the JSON property `perimeterType`
# @return [String]
attr_accessor :perimeter_type
# `ServicePerimeterConfig` specifies a set of Google Cloud resources that
# describe specific Service Perimeter configuration.
# Corresponds to the JSON property `spec`
# @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1ServicePerimeterConfig]
attr_accessor :spec
# `ServicePerimeterConfig` specifies a set of Google Cloud resources that
# describe specific Service Perimeter configuration.
# Corresponds to the JSON property `status`
# @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1ServicePerimeterConfig]
attr_accessor :status
# Human readable title. Must be unique within the Policy.
# Corresponds to the JSON property `title`
# @return [String]
attr_accessor :title
# Use explicit dry run spec flag. Ordinarily, a dry-run spec implicitly exists
# for all Service Perimeters, and that spec is identical to the status for those
# Service Perimeters. When this flag is set, it inhibits the generation of the
# implicit spec, thereby allowing the user to explicitly provide a configuration
# ("spec") to use in a dry-run version of the Service Perimeter. This allows the
# user to test changes to the enforced config ("status") without actually
# enforcing them. This testing is done through analyzing the differences between
# currently enforced and suggested restrictions. use_explicit_dry_run_spec must
# bet set to True if any of the fields in the spec are set to non-default values.
# Corresponds to the JSON property `useExplicitDryRunSpec`
# @return [Boolean]
attr_accessor :use_explicit_dry_run_spec
alias_method :use_explicit_dry_run_spec?, :use_explicit_dry_run_spec
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@description = args[:description] if args.key?(:description)
@name = args[:name] if args.key?(:name)
@perimeter_type = args[:perimeter_type] if args.key?(:perimeter_type)
@spec = args[:spec] if args.key?(:spec)
@status = args[:status] if args.key?(:status)
@title = args[:title] if args.key?(:title)
@use_explicit_dry_run_spec = args[:use_explicit_dry_run_spec] if args.key?(:use_explicit_dry_run_spec)
end
end
# `ServicePerimeterConfig` specifies a set of Google Cloud resources that
# describe specific Service Perimeter configuration.
class GoogleIdentityAccesscontextmanagerV1ServicePerimeterConfig
include Google::Apis::Core::Hashable
# A list of `AccessLevel` resource names that allow resources within the `
# ServicePerimeter` to be accessed from the internet. `AccessLevels` listed must
# be in the same policy as this `ServicePerimeter`. Referencing a nonexistent `
# AccessLevel` is a syntax error. If no `AccessLevel` names are listed,
# resources within the perimeter can only be accessed via Google Cloud calls
# with request origins within the perimeter. Example: `"accessPolicies/MY_POLICY/
# accessLevels/MY_LEVEL"`. For Service Perimeter Bridge, must be empty.
# Corresponds to the JSON property `accessLevels`
# @return [Array<String>]
attr_accessor :access_levels
# List of EgressPolicies to apply to the perimeter. A perimeter may have
# multiple EgressPolicies, each of which is evaluated separately. Access is
# granted if any EgressPolicy grants it. Must be empty for a perimeter bridge.
# Corresponds to the JSON property `egressPolicies`
# @return [Array<Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1EgressPolicy>]
attr_accessor :egress_policies
# List of IngressPolicies to apply to the perimeter. A perimeter may have
# multiple IngressPolicies, each of which is evaluated separately. Access is
# granted if any Ingress Policy grants it. Must be empty for a perimeter bridge.
# Corresponds to the JSON property `ingressPolicies`
# @return [Array<Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1IngressPolicy>]
attr_accessor :ingress_policies
# A list of Google Cloud resources that are inside of the service perimeter.
# Currently only projects are allowed. Format: `projects/`project_number``
# Corresponds to the JSON property `resources`
# @return [Array<String>]
attr_accessor :resources
# Google Cloud services that are subject to the Service Perimeter restrictions.
# For example, if `storage.googleapis.com` is specified, access to the storage
# buckets inside the perimeter must meet the perimeter's access restrictions.
# Corresponds to the JSON property `restrictedServices`
# @return [Array<String>]
attr_accessor :restricted_services
# Specifies how APIs are allowed to communicate within the Service Perimeter.
# Corresponds to the JSON property `vpcAccessibleServices`
# @return [Google::Apis::CloudassetV1::GoogleIdentityAccesscontextmanagerV1VpcAccessibleServices]
attr_accessor :vpc_accessible_services
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@access_levels = args[:access_levels] if args.key?(:access_levels)
@egress_policies = args[:egress_policies] if args.key?(:egress_policies)
@ingress_policies = args[:ingress_policies] if args.key?(:ingress_policies)
@resources = args[:resources] if args.key?(:resources)
@restricted_services = args[:restricted_services] if args.key?(:restricted_services)
@vpc_accessible_services = args[:vpc_accessible_services] if args.key?(:vpc_accessible_services)
end
end
# Specifies how APIs are allowed to communicate within the Service Perimeter.
class GoogleIdentityAccesscontextmanagerV1VpcAccessibleServices
include Google::Apis::Core::Hashable
# The list of APIs usable within the Service Perimeter. Must be empty unless '
# enable_restriction' is True. You can specify a list of individual services, as
# well as include the 'RESTRICTED-SERVICES' value, which automatically includes
# all of the services protected by the perimeter.
# Corresponds to the JSON property `allowedServices`
# @return [Array<String>]
attr_accessor :allowed_services
# Whether to restrict API calls within the Service Perimeter to the list of APIs
# specified in 'allowed_services'.
# Corresponds to the JSON property `enableRestriction`
# @return [Boolean]
attr_accessor :enable_restriction
alias_method :enable_restriction?, :enable_restriction
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@allowed_services = args[:allowed_services] if args.key?(:allowed_services)
@enable_restriction = args[:enable_restriction] if args.key?(:enable_restriction)
end
end
# An analysis message to group the query and results.
class IamPolicyAnalysis
include Google::Apis::Core::Hashable
# ## LINT.IfChange Keep in sync with ## logs/proto/cloud_asset_inventory/
# iam_policy_analyzer_log.proto IAM policy analysis query message.
# Corresponds to the JSON property `analysisQuery`
# @return [Google::Apis::CloudassetV1::IamPolicyAnalysisQuery]
attr_accessor :analysis_query
# A list of IamPolicyAnalysisResult that matches the analysis query, or empty if
# no result is found.
# Corresponds to the JSON property `analysisResults`
# @return [Array<Google::Apis::CloudassetV1::IamPolicyAnalysisResult>]
attr_accessor :analysis_results
# Represents whether all entries in the analysis_results have been fully
# explored to answer the query.
# Corresponds to the JSON property `fullyExplored`
# @return [Boolean]
attr_accessor :fully_explored
alias_method :fully_explored?, :fully_explored
# A list of non-critical errors happened during the query handling.
# Corresponds to the JSON property `nonCriticalErrors`
# @return [Array<Google::Apis::CloudassetV1::IamPolicyAnalysisState>]
attr_accessor :non_critical_errors
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@analysis_query = args[:analysis_query] if args.key?(:analysis_query)
@analysis_results = args[:analysis_results] if args.key?(:analysis_results)
@fully_explored = args[:fully_explored] if args.key?(:fully_explored)
@non_critical_errors = args[:non_critical_errors] if args.key?(:non_critical_errors)
end
end
# Output configuration for export IAM policy analysis destination.
class IamPolicyAnalysisOutputConfig
include Google::Apis::Core::Hashable
# A BigQuery destination.
# Corresponds to the JSON property `bigqueryDestination`
# @return [Google::Apis::CloudassetV1::GoogleCloudAssetV1BigQueryDestination]
attr_accessor :bigquery_destination
# A Cloud Storage location.
# Corresponds to the JSON property `gcsDestination`
# @return [Google::Apis::CloudassetV1::GoogleCloudAssetV1GcsDestination]
attr_accessor :gcs_destination
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@bigquery_destination = args[:bigquery_destination] if args.key?(:bigquery_destination)
@gcs_destination = args[:gcs_destination] if args.key?(:gcs_destination)
end
end
# ## LINT.IfChange Keep in sync with ## logs/proto/cloud_asset_inventory/
# iam_policy_analyzer_log.proto IAM policy analysis query message.
class IamPolicyAnalysisQuery
include Google::Apis::Core::Hashable
# Specifies roles and/or permissions to analyze, to determine both the
# identities possessing them and the resources they control. If multiple values
# are specified, results will include roles or permissions matching any of them.
# The total number of roles and permissions should be equal or less than 10.
# Corresponds to the JSON property `accessSelector`
# @return [Google::Apis::CloudassetV1::AccessSelector]
attr_accessor :access_selector
# Specifies an identity for which to determine resource access, based on roles
# assigned either directly to them or to the groups they belong to, directly or
# indirectly.
# Corresponds to the JSON property `identitySelector`
# @return [Google::Apis::CloudassetV1::IdentitySelector]
attr_accessor :identity_selector
# Contains query options.
# Corresponds to the JSON property `options`
# @return [Google::Apis::CloudassetV1::Options]
attr_accessor :options
# Specifies the resource to analyze for access policies, which may be set
# directly on the resource, or on ancestors such as organizations, folders or
# projects.
# Corresponds to the JSON property `resourceSelector`
# @return [Google::Apis::CloudassetV1::ResourceSelector]
attr_accessor :resource_selector
# Required. The relative name of the root asset. Only resources and IAM policies
# within the scope will be analyzed. This can only be an organization number (
# such as "organizations/123"), a folder number (such as "folders/123"), a
# project ID (such as "projects/my-project-id"), or a project number (such as "
# projects/12345"). To know how to get organization id, visit [here ](https://
# cloud.google.com/resource-manager/docs/creating-managing-organization#
# retrieving_your_organization_id). To know how to get folder or project id,
# visit [here ](https://cloud.google.com/resource-manager/docs/creating-managing-
# folders#viewing_or_listing_folders_and_projects).
# Corresponds to the JSON property `scope`
# @return [String]
attr_accessor :scope
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@access_selector = args[:access_selector] if args.key?(:access_selector)
@identity_selector = args[:identity_selector] if args.key?(:identity_selector)
@options = args[:options] if args.key?(:options)
@resource_selector = args[:resource_selector] if args.key?(:resource_selector)
@scope = args[:scope] if args.key?(:scope)
end
end
# IAM Policy analysis result, consisting of one IAM policy binding and derived
# access control lists.
class IamPolicyAnalysisResult
include Google::Apis::Core::Hashable
# The access control lists derived from the iam_binding that match or
# potentially match resource and access selectors specified in the request.
# Corresponds to the JSON property `accessControlLists`
# @return [Array<Google::Apis::CloudassetV1::GoogleCloudAssetV1AccessControlList>]
attr_accessor :access_control_lists
# The [full resource name](https://cloud.google.com/asset-inventory/docs/
# resource-name-format) of the resource to which the iam_binding policy attaches.
# Corresponds to the JSON property `attachedResourceFullName`
# @return [String]
attr_accessor :attached_resource_full_name
# Represents whether all analyses on the iam_binding have successfully finished.
# Corresponds to the JSON property `fullyExplored`
# @return [Boolean]
attr_accessor :fully_explored
alias_method :fully_explored?, :fully_explored
# Associates `members` with a `role`.
# Corresponds to the JSON property `iamBinding`
# @return [Google::Apis::CloudassetV1::Binding]
attr_accessor :iam_binding
# The identities and group edges.
# Corresponds to the JSON property `identityList`
# @return [Google::Apis::CloudassetV1::GoogleCloudAssetV1IdentityList]
attr_accessor :identity_list
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@access_control_lists = args[:access_control_lists] if args.key?(:access_control_lists)
@attached_resource_full_name = args[:attached_resource_full_name] if args.key?(:attached_resource_full_name)
@fully_explored = args[:fully_explored] if args.key?(:fully_explored)
@iam_binding = args[:iam_binding] if args.key?(:iam_binding)
@identity_list = args[:identity_list] if args.key?(:identity_list)
end
end
# Represents the detailed state of an entity under analysis, such as a resource,
# an identity or an access.
class IamPolicyAnalysisState
include Google::Apis::Core::Hashable
# The human-readable description of the cause of failure.
# Corresponds to the JSON property `cause`
# @return [String]
attr_accessor :cause
# The Google standard error code that best describes the state. For example: -
# OK means the analysis on this entity has been successfully finished; -
# PERMISSION_DENIED means an access denied error is encountered; -
# DEADLINE_EXCEEDED means the analysis on this entity hasn't been started in
# time;
# Corresponds to the JSON property `code`
# @return [String]
attr_accessor :code
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@cause = args[:cause] if args.key?(:cause)
@code = args[:code] if args.key?(:code)
end
end
# A result of IAM Policy search, containing information of an IAM policy.
class IamPolicySearchResult
include Google::Apis::Core::Hashable
# Explanation about the IAM policy search result.
# Corresponds to the JSON property `explanation`
# @return [Google::Apis::CloudassetV1::Explanation]
attr_accessor :explanation
# An Identity and Access Management (IAM) policy, which specifies access
# controls for Google Cloud resources. A `Policy` is a collection of `bindings`.
# A `binding` binds one or more `members` to a single `role`. Members can be
# user accounts, service accounts, Google groups, and domains (such as G Suite).
# A `role` is a named list of permissions; each `role` can be an IAM predefined
# role or a user-created custom role. For some types of Google Cloud resources,
# a `binding` can also specify a `condition`, which is a logical expression that
# allows access to a resource only if the expression evaluates to `true`. A
# condition can add constraints based on attributes of the request, the resource,
# or both. To learn which resources support conditions in their IAM policies,
# see the [IAM documentation](https://cloud.google.com/iam/help/conditions/
# resource-policies). **JSON example:** ` "bindings": [ ` "role": "roles/
# resourcemanager.organizationAdmin", "members": [ "user:mike@example.com", "
# group:admins@example.com", "domain:google.com", "serviceAccount:my-project-id@
# appspot.gserviceaccount.com" ] `, ` "role": "roles/resourcemanager.
# organizationViewer", "members": [ "user:eve@example.com" ], "condition": ` "
# title": "expirable access", "description": "Does not grant access after Sep
# 2020", "expression": "request.time < timestamp('2020-10-01T00:00:00.000Z')", `
# ` ], "etag": "BwWWja0YfJA=", "version": 3 ` **YAML example:** bindings: -
# members: - user:mike@example.com - group:admins@example.com - domain:google.
# com - serviceAccount:my-project-id@appspot.gserviceaccount.com role: roles/
# resourcemanager.organizationAdmin - members: - user:eve@example.com role:
# roles/resourcemanager.organizationViewer condition: title: expirable access
# description: Does not grant access after Sep 2020 expression: request.time <
# timestamp('2020-10-01T00:00:00.000Z') - etag: BwWWja0YfJA= - version: 3 For a
# description of IAM and its features, see the [IAM documentation](https://cloud.
# google.com/iam/docs/).
# Corresponds to the JSON property `policy`
# @return [Google::Apis::CloudassetV1::Policy]
attr_accessor :policy
# Optional. The project that the associated GCP resource belongs to, in the form
# of projects/`PROJECT_NUMBER`. If an IAM policy is set on a resource (like VM
# instance, Cloud Storage bucket), the project field will indicate the project
# that contains the resource. If an IAM policy is set on a folder or orgnization,
# the project field will be empty. To search against the `project`: * specify
# the `scope` field as this project in your search request.
# Corresponds to the JSON property `project`
# @return [String]
attr_accessor :project
# Required. The full resource name of the resource associated with this IAM
# policy. Example: `//compute.googleapis.com/projects/my_project_123/zones/zone1/
# instances/instance1`. See [Cloud Asset Inventory Resource Name Format](https://
# cloud.google.com/asset-inventory/docs/resource-name-format) for more
# information. To search against the `resource`: * use a field query. Example: `
# resource:organizations/123`
# Corresponds to the JSON property `resource`
# @return [String]
attr_accessor :resource
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@explanation = args[:explanation] if args.key?(:explanation)
@policy = args[:policy] if args.key?(:policy)
@project = args[:project] if args.key?(:project)
@resource = args[:resource] if args.key?(:resource)
end
end
# Specifies an identity for which to determine resource access, based on roles
# assigned either directly to them or to the groups they belong to, directly or
# indirectly.
class IdentitySelector
include Google::Apis::Core::Hashable
# Required. The identity appear in the form of members in [IAM policy binding](
# https://cloud.google.com/iam/reference/rest/v1/Binding). The examples of
# supported forms are: "user:mike@example.com", "group:admins@example.com", "
# domain:google.com", "serviceAccount:my-project-id@appspot.gserviceaccount.com".
# Notice that wildcard characters (such as * and ?) are not supported. You must
# give a specific identity.
# Corresponds to the JSON property `identity`
# @return [String]
attr_accessor :identity
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@identity = args[:identity] if args.key?(:identity)
end
end
# The inventory details of a VM.
class Inventory
include Google::Apis::Core::Hashable
# Inventory items related to the VM keyed by an opaque unique identifier for
# each inventory item. The identifier is unique to each distinct and addressable
# inventory item and will change, when there is a new package version.
# Corresponds to the JSON property `items`
# @return [Hash<String,Google::Apis::CloudassetV1::Item>]
attr_accessor :items
# Operating system information for the VM.
# Corresponds to the JSON property `osInfo`
# @return [Google::Apis::CloudassetV1::OsInfo]
attr_accessor :os_info
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@items = args[:items] if args.key?(:items)
@os_info = args[:os_info] if args.key?(:os_info)
end
end
# A single piece of inventory on a VM.
class Item
include Google::Apis::Core::Hashable
# Software package information of the operating system.
# Corresponds to the JSON property `availablePackage`
# @return [Google::Apis::CloudassetV1::SoftwarePackage]
attr_accessor :available_package
# When this inventory item was first detected.
# Corresponds to the JSON property `createTime`
# @return [String]
attr_accessor :create_time
# Identifier for this item, unique across items for this VM.
# Corresponds to the JSON property `id`
# @return [String]
attr_accessor :id
# Software package information of the operating system.
# Corresponds to the JSON property `installedPackage`
# @return [Google::Apis::CloudassetV1::SoftwarePackage]
attr_accessor :installed_package
# The origin of this inventory item.
# Corresponds to the JSON property `originType`
# @return [String]
attr_accessor :origin_type
# The specific type of inventory, correlating to its specific details.
# Corresponds to the JSON property `type`
# @return [String]
attr_accessor :type
# When this inventory item was last modified.
# Corresponds to the JSON property `updateTime`
# @return [String]
attr_accessor :update_time
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@available_package = args[:available_package] if args.key?(:available_package)
@create_time = args[:create_time] if args.key?(:create_time)
@id = args[:id] if args.key?(:id)
@installed_package = args[:installed_package] if args.key?(:installed_package)
@origin_type = args[:origin_type] if args.key?(:origin_type)
@type = args[:type] if args.key?(:type)
@update_time = args[:update_time] if args.key?(:update_time)
end
end
#
class ListFeedsResponse
include Google::Apis::Core::Hashable
# A list of feeds.
# Corresponds to the JSON property `feeds`
# @return [Array<Google::Apis::CloudassetV1::Feed>]
attr_accessor :feeds
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@feeds = args[:feeds] if args.key?(:feeds)
end
end
# This resource represents a long-running operation that is the result of a
# network API call.
class Operation
include Google::Apis::Core::Hashable
# If the value is `false`, it means the operation is still in progress. If `true`
# , the operation is completed, and either `error` or `response` is available.
# Corresponds to the JSON property `done`
# @return [Boolean]
attr_accessor :done
alias_method :done?, :done
# The `Status` type defines a logical error model that is suitable for different
# programming environments, including REST APIs and RPC APIs. It is used by [
# gRPC](https://github.com/grpc). Each `Status` message contains three pieces of
# data: error code, error message, and error details. You can find out more
# about this error model and how to work with it in the [API Design Guide](https:
# //cloud.google.com/apis/design/errors).
# Corresponds to the JSON property `error`
# @return [Google::Apis::CloudassetV1::Status]
attr_accessor :error
# Service-specific metadata associated with the operation. It typically contains
# progress information and common metadata such as create time. Some services
# might not provide such metadata. Any method that returns a long-running
# operation should document the metadata type, if any.
# Corresponds to the JSON property `metadata`
# @return [Hash<String,Object>]
attr_accessor :metadata
# The server-assigned name, which is only unique within the same service that
# originally returns it. If you use the default HTTP mapping, the `name` should
# be a resource name ending with `operations/`unique_id``.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# The normal response of the operation in case of success. If the original
# method returns no data on success, such as `Delete`, the response is `google.
# protobuf.Empty`. If the original method is standard `Get`/`Create`/`Update`,
# the response should be the resource. For other methods, the response should
# have the type `XxxResponse`, where `Xxx` is the original method name. For
# example, if the original method name is `TakeSnapshot()`, the inferred
# response type is `TakeSnapshotResponse`.
# Corresponds to the JSON property `response`
# @return [Hash<String,Object>]
attr_accessor :response
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@done = args[:done] if args.key?(:done)
@error = args[:error] if args.key?(:error)
@metadata = args[:metadata] if args.key?(:metadata)
@name = args[:name] if args.key?(:name)
@response = args[:response] if args.key?(:response)
end
end
# Contains query options.
class Options
include Google::Apis::Core::Hashable
# Optional. If true, the response will include access analysis from identities
# to resources via service account impersonation. This is a very expensive
# operation, because many derived queries will be executed. We highly recommend
# you use AssetService.AnalyzeIamPolicyLongrunning rpc instead. For example, if
# the request analyzes for which resources user A has permission P, and there's
# an IAM policy states user A has iam.serviceAccounts.getAccessToken permission
# to a service account SA, and there's another IAM policy states service account
# SA has permission P to a GCP folder F, then user A potentially has access to
# the GCP folder F. And those advanced analysis results will be included in
# AnalyzeIamPolicyResponse.service_account_impersonation_analysis. Another
# example, if the request analyzes for who has permission P to a GCP folder F,
# and there's an IAM policy states user A has iam.serviceAccounts.actAs
# permission to a service account SA, and there's another IAM policy states
# service account SA has permission P to the GCP folder F, then user A
# potentially has access to the GCP folder F. And those advanced analysis
# results will be included in AnalyzeIamPolicyResponse.
# service_account_impersonation_analysis. Default is false.
# Corresponds to the JSON property `analyzeServiceAccountImpersonation`
# @return [Boolean]
attr_accessor :analyze_service_account_impersonation
alias_method :analyze_service_account_impersonation?, :analyze_service_account_impersonation
# Optional. If true, the identities section of the result will expand any Google
# groups appearing in an IAM policy binding. If IamPolicyAnalysisQuery.
# identity_selector is specified, the identity in the result will be determined
# by the selector, and this flag is not allowed to set. Default is false.
# Corresponds to the JSON property `expandGroups`
# @return [Boolean]
attr_accessor :expand_groups
alias_method :expand_groups?, :expand_groups
# Optional. If true and IamPolicyAnalysisQuery.resource_selector is not
# specified, the resource section of the result will expand any resource
# attached to an IAM policy to include resources lower in the resource hierarchy.
# For example, if the request analyzes for which resources user A has
# permission P, and the results include an IAM policy with P on a GCP folder,
# the results will also include resources in that folder with permission P. If
# true and IamPolicyAnalysisQuery.resource_selector is specified, the resource
# section of the result will expand the specified resource to include resources
# lower in the resource hierarchy. Only project or lower resources are supported.
# Folder and organization resource cannot be used together with this option.
# For example, if the request analyzes for which users have permission P on a
# GCP project with this option enabled, the results will include all users who
# have permission P on that project or any lower resource. Default is false.
# Corresponds to the JSON property `expandResources`
# @return [Boolean]
attr_accessor :expand_resources
alias_method :expand_resources?, :expand_resources
# Optional. If true, the access section of result will expand any roles
# appearing in IAM policy bindings to include their permissions. If
# IamPolicyAnalysisQuery.access_selector is specified, the access section of the
# result will be determined by the selector, and this flag is not allowed to set.
# Default is false.
# Corresponds to the JSON property `expandRoles`
# @return [Boolean]
attr_accessor :expand_roles
alias_method :expand_roles?, :expand_roles
# Optional. If true, the result will output group identity edges, starting from
# the binding's group members, to any expanded identities. Default is false.
# Corresponds to the JSON property `outputGroupEdges`
# @return [Boolean]
attr_accessor :output_group_edges
alias_method :output_group_edges?, :output_group_edges
# Optional. If true, the result will output resource edges, starting from the
# policy attached resource, to any expanded resources. Default is false.
# Corresponds to the JSON property `outputResourceEdges`
# @return [Boolean]
attr_accessor :output_resource_edges
alias_method :output_resource_edges?, :output_resource_edges
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@analyze_service_account_impersonation = args[:analyze_service_account_impersonation] if args.key?(:analyze_service_account_impersonation)
@expand_groups = args[:expand_groups] if args.key?(:expand_groups)
@expand_resources = args[:expand_resources] if args.key?(:expand_resources)
@expand_roles = args[:expand_roles] if args.key?(:expand_roles)
@output_group_edges = args[:output_group_edges] if args.key?(:output_group_edges)
@output_resource_edges = args[:output_resource_edges] if args.key?(:output_resource_edges)
end
end
# Operating system information for the VM.
class OsInfo
include Google::Apis::Core::Hashable
# The system architecture of the operating system.
# Corresponds to the JSON property `architecture`
# @return [String]
attr_accessor :architecture
# The VM hostname.
# Corresponds to the JSON property `hostname`
# @return [String]
attr_accessor :hostname
# The kernel release of the operating system.
# Corresponds to the JSON property `kernelRelease`
# @return [String]
attr_accessor :kernel_release
# The kernel version of the operating system.
# Corresponds to the JSON property `kernelVersion`
# @return [String]
attr_accessor :kernel_version
# The operating system long name. For example 'Debian GNU/Linux 9' or 'Microsoft
# Window Server 2019 Datacenter'.
# Corresponds to the JSON property `longName`
# @return [String]
attr_accessor :long_name
# The current version of the OS Config agent running on the VM.
# Corresponds to the JSON property `osconfigAgentVersion`
# @return [String]
attr_accessor :osconfig_agent_version
# The operating system short name. For example, 'windows' or 'debian'.
# Corresponds to the JSON property `shortName`
# @return [String]
attr_accessor :short_name
# The version of the operating system.
# Corresponds to the JSON property `version`
# @return [String]
attr_accessor :version
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@architecture = args[:architecture] if args.key?(:architecture)
@hostname = args[:hostname] if args.key?(:hostname)
@kernel_release = args[:kernel_release] if args.key?(:kernel_release)
@kernel_version = args[:kernel_version] if args.key?(:kernel_version)
@long_name = args[:long_name] if args.key?(:long_name)
@osconfig_agent_version = args[:osconfig_agent_version] if args.key?(:osconfig_agent_version)
@short_name = args[:short_name] if args.key?(:short_name)
@version = args[:version] if args.key?(:version)
end
end
# Output configuration for export assets destination.
class OutputConfig
include Google::Apis::Core::Hashable
# A BigQuery destination for exporting assets to.
# Corresponds to the JSON property `bigqueryDestination`
# @return [Google::Apis::CloudassetV1::BigQueryDestination]
attr_accessor :bigquery_destination
# A Cloud Storage location.
# Corresponds to the JSON property `gcsDestination`
# @return [Google::Apis::CloudassetV1::GcsDestination]
attr_accessor :gcs_destination
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@bigquery_destination = args[:bigquery_destination] if args.key?(:bigquery_destination)
@gcs_destination = args[:gcs_destination] if args.key?(:gcs_destination)
end
end
# Specifications of BigQuery partitioned table as export destination.
class PartitionSpec
include Google::Apis::Core::Hashable
# The partition key for BigQuery partitioned table.
# Corresponds to the JSON property `partitionKey`
# @return [String]
attr_accessor :partition_key
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@partition_key = args[:partition_key] if args.key?(:partition_key)
end
end
# IAM permissions
class Permissions
include Google::Apis::Core::Hashable
# A list of permissions. A sample permission string: `compute.disk.get`.
# Corresponds to the JSON property `permissions`
# @return [Array<String>]
attr_accessor :permissions
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@permissions = args[:permissions] if args.key?(:permissions)
end
end
# An Identity and Access Management (IAM) policy, which specifies access
# controls for Google Cloud resources. A `Policy` is a collection of `bindings`.
# A `binding` binds one or more `members` to a single `role`. Members can be
# user accounts, service accounts, Google groups, and domains (such as G Suite).
# A `role` is a named list of permissions; each `role` can be an IAM predefined
# role or a user-created custom role. For some types of Google Cloud resources,
# a `binding` can also specify a `condition`, which is a logical expression that
# allows access to a resource only if the expression evaluates to `true`. A
# condition can add constraints based on attributes of the request, the resource,
# or both. To learn which resources support conditions in their IAM policies,
# see the [IAM documentation](https://cloud.google.com/iam/help/conditions/
# resource-policies). **JSON example:** ` "bindings": [ ` "role": "roles/
# resourcemanager.organizationAdmin", "members": [ "user:mike@example.com", "
# group:admins@example.com", "domain:google.com", "serviceAccount:my-project-id@
# appspot.gserviceaccount.com" ] `, ` "role": "roles/resourcemanager.
# organizationViewer", "members": [ "user:eve@example.com" ], "condition": ` "
# title": "expirable access", "description": "Does not grant access after Sep
# 2020", "expression": "request.time < timestamp('2020-10-01T00:00:00.000Z')", `
# ` ], "etag": "BwWWja0YfJA=", "version": 3 ` **YAML example:** bindings: -
# members: - user:mike@example.com - group:admins@example.com - domain:google.
# com - serviceAccount:my-project-id@appspot.gserviceaccount.com role: roles/
# resourcemanager.organizationAdmin - members: - user:eve@example.com role:
# roles/resourcemanager.organizationViewer condition: title: expirable access
# description: Does not grant access after Sep 2020 expression: request.time <
# timestamp('2020-10-01T00:00:00.000Z') - etag: BwWWja0YfJA= - version: 3 For a
# description of IAM and its features, see the [IAM documentation](https://cloud.
# google.com/iam/docs/).
class Policy
include Google::Apis::Core::Hashable
# Specifies cloud audit logging configuration for this policy.
# Corresponds to the JSON property `auditConfigs`
# @return [Array<Google::Apis::CloudassetV1::AuditConfig>]
attr_accessor :audit_configs
# Associates a list of `members` to a `role`. Optionally, may specify a `
# condition` that determines how and when the `bindings` are applied. Each of
# the `bindings` must contain at least one member.
# Corresponds to the JSON property `bindings`
# @return [Array<Google::Apis::CloudassetV1::Binding>]
attr_accessor :bindings
# `etag` is used for optimistic concurrency control as a way to help prevent
# simultaneous updates of a policy from overwriting each other. It is strongly
# suggested that systems make use of the `etag` in the read-modify-write cycle
# to perform policy updates in order to avoid race conditions: An `etag` is
# returned in the response to `getIamPolicy`, and systems are expected to put
# that etag in the request to `setIamPolicy` to ensure that their change will be
# applied to the same version of the policy. **Important:** If you use IAM
# Conditions, you must include the `etag` field whenever you call `setIamPolicy`.
# If you omit this field, then IAM allows you to overwrite a version `3` policy
# with a version `1` policy, and all of the conditions in the version `3` policy
# are lost.
# Corresponds to the JSON property `etag`
# NOTE: Values are automatically base64 encoded/decoded in the client library.
# @return [String]
attr_accessor :etag
# Specifies the format of the policy. Valid values are `0`, `1`, and `3`.
# Requests that specify an invalid value are rejected. Any operation that
# affects conditional role bindings must specify version `3`. This requirement
# applies to the following operations: * Getting a policy that includes a
# conditional role binding * Adding a conditional role binding to a policy *
# Changing a conditional role binding in a policy * Removing any role binding,
# with or without a condition, from a policy that includes conditions **
# Important:** If you use IAM Conditions, you must include the `etag` field
# whenever you call `setIamPolicy`. If you omit this field, then IAM allows you
# to overwrite a version `3` policy with a version `1` policy, and all of the
# conditions in the version `3` policy are lost. If a policy does not include
# any conditions, operations on that policy may specify any valid version or
# leave the field unset. To learn which resources support conditions in their
# IAM policies, see the [IAM documentation](https://cloud.google.com/iam/help/
# conditions/resource-policies).
# Corresponds to the JSON property `version`
# @return [Fixnum]
attr_accessor :version
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@audit_configs = args[:audit_configs] if args.key?(:audit_configs)
@bindings = args[:bindings] if args.key?(:bindings)
@etag = args[:etag] if args.key?(:etag)
@version = args[:version] if args.key?(:version)
end
end
# A Pub/Sub destination.
class PubsubDestination
include Google::Apis::Core::Hashable
# The name of the Pub/Sub topic to publish to. Example: `projects/PROJECT_ID/
# topics/TOPIC_ID`.
# Corresponds to the JSON property `topic`
# @return [String]
attr_accessor :topic
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@topic = args[:topic] if args.key?(:topic)
end
end
# A representation of a Google Cloud resource.
class Resource
include Google::Apis::Core::Hashable
# The content of the resource, in which some sensitive fields are removed and
# may not be present.
# Corresponds to the JSON property `data`
# @return [Hash<String,Object>]
attr_accessor :data
# The URL of the discovery document containing the resource's JSON schema.
# Example: `https://www.googleapis.com/discovery/v1/apis/compute/v1/rest` This
# value is unspecified for resources that do not have an API based on a
# discovery document, such as Cloud Bigtable.
# Corresponds to the JSON property `discoveryDocumentUri`
# @return [String]
attr_accessor :discovery_document_uri
# The JSON schema name listed in the discovery document. Example: `Project` This
# value is unspecified for resources that do not have an API based on a
# discovery document, such as Cloud Bigtable.
# Corresponds to the JSON property `discoveryName`
# @return [String]
attr_accessor :discovery_name
# The location of the resource in Google Cloud, such as its zone and region. For
# more information, see https://cloud.google.com/about/locations/.
# Corresponds to the JSON property `location`
# @return [String]
attr_accessor :location
# The full name of the immediate parent of this resource. See [Resource Names](
# https://cloud.google.com/apis/design/resource_names#full_resource_name) for
# more information. For Google Cloud assets, this value is the parent resource
# defined in the [Cloud IAM policy hierarchy](https://cloud.google.com/iam/docs/
# overview#policy_hierarchy). Example: `//cloudresourcemanager.googleapis.com/
# projects/my_project_123` For third-party assets, this field may be set
# differently.
# Corresponds to the JSON property `parent`
# @return [String]
attr_accessor :parent
# The REST URL for accessing the resource. An HTTP `GET` request using this URL
# returns the resource itself. Example: `https://cloudresourcemanager.googleapis.
# com/v1/projects/my-project-123` This value is unspecified for resources
# without a REST API.
# Corresponds to the JSON property `resourceUrl`
# @return [String]
attr_accessor :resource_url
# The API version. Example: `v1`
# Corresponds to the JSON property `version`
# @return [String]
attr_accessor :version
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data = args[:data] if args.key?(:data)
@discovery_document_uri = args[:discovery_document_uri] if args.key?(:discovery_document_uri)
@discovery_name = args[:discovery_name] if args.key?(:discovery_name)
@location = args[:location] if args.key?(:location)
@parent = args[:parent] if args.key?(:parent)
@resource_url = args[:resource_url] if args.key?(:resource_url)
@version = args[:version] if args.key?(:version)
end
end
# A result of Resource Search, containing information of a cloud resource.
class ResourceSearchResult
include Google::Apis::Core::Hashable
# Optional. The additional searchable attributes of this resource. The
# attributes may vary from one resource type to another. Examples: `projectId`
# for Project, `dnsName` for DNS ManagedZone. This field contains a subset of
# the resource metadata fields that are returned by the List or Get APIs
# provided by the corresponding GCP service (e.g., Compute Engine). see [API
# references and supported searchable attributes](https://cloud.google.com/asset-
# inventory/docs/supported-asset-types#searchable_asset_types) for more
# information. You can search values of these fields through free text search.
# However, you should not consume the field programically as the field names and
# values may change as the GCP service updates to a new incompatible API version.
# To search against the `additional_attributes`: * use a free text query to
# match the attributes values. Example: to search `additional_attributes = `
# dnsName: "foobar" ``, you can issue a query `foobar`.
# Corresponds to the JSON property `additionalAttributes`
# @return [Hash<String,Object>]
attr_accessor :additional_attributes
# Required. The type of this resource. Example: `compute.googleapis.com/Disk`.
# To search against the `asset_type`: * specify the `asset_type` field in your
# search request.
# Corresponds to the JSON property `assetType`
# @return [String]
attr_accessor :asset_type
# Optional. One or more paragraphs of text description of this resource. Maximum
# length could be up to 1M bytes. This field is available only when the resource'
# s proto contains it. To search against the `description`: * use a field query.
# Example: `description:"*important instance*"` * use a free text query. Example:
# `"*important instance*"`
# Corresponds to the JSON property `description`
# @return [String]
attr_accessor :description
# Optional. The display name of this resource. This field is available only when
# the resource's proto contains it. To search against the `display_name`: * use
# a field query. Example: `displayName:"My Instance"` * use a free text query.
# Example: `"My Instance"`
# Corresponds to the JSON property `displayName`
# @return [String]
attr_accessor :display_name
# Optional. Labels associated with this resource. See [Labelling and grouping
# GCP resources](https://cloud.google.com/blog/products/gcp/labelling-and-
# grouping-your-google-cloud-platform-resources) for more information. This
# field is available only when the resource's proto contains it. To search
# against the `labels`: * use a field query: - query on any label's key or value.
# Example: `labels:prod` - query by a given label. Example: `labels.env:prod` -
# query by a given label's existence. Example: `labels.env:*` * use a free text
# query. Example: `prod`
# Corresponds to the JSON property `labels`
# @return [Hash<String,String>]
attr_accessor :labels
# Optional. Location can be `global`, regional like `us-east1`, or zonal like `
# us-west1-b`. This field is available only when the resource's proto contains
# it. To search against the `location`: * use a field query. Example: `location:
# us-west*` * use a free text query. Example: `us-west*`
# Corresponds to the JSON property `location`
# @return [String]
attr_accessor :location
# Required. The full resource name of this resource. Example: `//compute.
# googleapis.com/projects/my_project_123/zones/zone1/instances/instance1`. See [
# Cloud Asset Inventory Resource Name Format](https://cloud.google.com/asset-
# inventory/docs/resource-name-format) for more information. To search against
# the `name`: * use a field query. Example: `name:instance1` * use a free text
# query. Example: `instance1`
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# Optional. Network tags associated with this resource. Like labels, network
# tags are a type of annotations used to group GCP resources. See [Labelling GCP
# resources](https://cloud.google.com/blog/products/gcp/labelling-and-grouping-
# your-google-cloud-platform-resources) for more information. This field is
# available only when the resource's proto contains it. To search against the `
# network_tags`: * use a field query. Example: `networkTags:internal` * use a
# free text query. Example: `internal`
# Corresponds to the JSON property `networkTags`
# @return [Array<String>]
attr_accessor :network_tags
# Optional. The project that this resource belongs to, in the form of projects/`
# PROJECT_NUMBER`. This field is available when the resource belongs to a
# project. To search against the `project`: * specify the `scope` field as this
# project in your search request.
# Corresponds to the JSON property `project`
# @return [String]
attr_accessor :project
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@additional_attributes = args[:additional_attributes] if args.key?(:additional_attributes)
@asset_type = args[:asset_type] if args.key?(:asset_type)
@description = args[:description] if args.key?(:description)
@display_name = args[:display_name] if args.key?(:display_name)
@labels = args[:labels] if args.key?(:labels)
@location = args[:location] if args.key?(:location)
@name = args[:name] if args.key?(:name)
@network_tags = args[:network_tags] if args.key?(:network_tags)
@project = args[:project] if args.key?(:project)
end
end
# Specifies the resource to analyze for access policies, which may be set
# directly on the resource, or on ancestors such as organizations, folders or
# projects.
class ResourceSelector
include Google::Apis::Core::Hashable
# Required. The [full resource name] (https://cloud.google.com/asset-inventory/
# docs/resource-name-format) of a resource of [supported resource types](https://
# cloud.google.com/asset-inventory/docs/supported-asset-types#
# analyzable_asset_types).
# Corresponds to the JSON property `fullResourceName`
# @return [String]
attr_accessor :full_resource_name
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@full_resource_name = args[:full_resource_name] if args.key?(:full_resource_name)
end
end
# Search all IAM policies response.
class SearchAllIamPoliciesResponse
include Google::Apis::Core::Hashable
# Set if there are more results than those appearing in this response; to get
# the next set of results, call this method again, using this value as the `
# page_token`.
# Corresponds to the JSON property `nextPageToken`
# @return [String]
attr_accessor :next_page_token
# A list of IamPolicy that match the search query. Related information such as
# the associated resource is returned along with the policy.
# Corresponds to the JSON property `results`
# @return [Array<Google::Apis::CloudassetV1::IamPolicySearchResult>]
attr_accessor :results
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@next_page_token = args[:next_page_token] if args.key?(:next_page_token)
@results = args[:results] if args.key?(:results)
end
end
# Search all resources response.
class SearchAllResourcesResponse
include Google::Apis::Core::Hashable
# If there are more results than those appearing in this response, then `
# next_page_token` is included. To get the next set of results, call this method
# again using the value of `next_page_token` as `page_token`.
# Corresponds to the JSON property `nextPageToken`
# @return [String]
attr_accessor :next_page_token
# A list of Resources that match the search query. It contains the resource
# standard metadata information.
# Corresponds to the JSON property `results`
# @return [Array<Google::Apis::CloudassetV1::ResourceSearchResult>]
attr_accessor :results
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@next_page_token = args[:next_page_token] if args.key?(:next_page_token)
@results = args[:results] if args.key?(:results)
end
end
# Software package information of the operating system.
class SoftwarePackage
include Google::Apis::Core::Hashable
# Information related to the a standard versioned package. This includes package
# info for APT, Yum, Zypper, and Googet package managers.
# Corresponds to the JSON property `aptPackage`
# @return [Google::Apis::CloudassetV1::VersionedPackage]
attr_accessor :apt_package
# Information related to the a standard versioned package. This includes package
# info for APT, Yum, Zypper, and Googet package managers.
# Corresponds to the JSON property `cosPackage`
# @return [Google::Apis::CloudassetV1::VersionedPackage]
attr_accessor :cos_package
# Information related to the a standard versioned package. This includes package
# info for APT, Yum, Zypper, and Googet package managers.
# Corresponds to the JSON property `googetPackage`
# @return [Google::Apis::CloudassetV1::VersionedPackage]
attr_accessor :googet_package
# Information related to a Quick Fix Engineering package. Fields are taken from
# Windows QuickFixEngineering Interface and match the source names: https://docs.
# microsoft.com/en-us/windows/win32/cimwin32prov/win32-quickfixengineering
# Corresponds to the JSON property `qfePackage`
# @return [Google::Apis::CloudassetV1::WindowsQuickFixEngineeringPackage]
attr_accessor :qfe_package
# Details related to a Windows Update package. Field data and names are taken
# from Windows Update API IUpdate Interface: https://docs.microsoft.com/en-us/
# windows/win32/api/_wua/ Descriptive fields like title, and description are
# localized based on the locale of the VM being updated.
# Corresponds to the JSON property `wuaPackage`
# @return [Google::Apis::CloudassetV1::WindowsUpdatePackage]
attr_accessor :wua_package
# Information related to the a standard versioned package. This includes package
# info for APT, Yum, Zypper, and Googet package managers.
# Corresponds to the JSON property `yumPackage`
# @return [Google::Apis::CloudassetV1::VersionedPackage]
attr_accessor :yum_package
# Information related to the a standard versioned package. This includes package
# info for APT, Yum, Zypper, and Googet package managers.
# Corresponds to the JSON property `zypperPackage`
# @return [Google::Apis::CloudassetV1::VersionedPackage]
attr_accessor :zypper_package
# Details related to a Zypper Patch.
# Corresponds to the JSON property `zypperPatch`
# @return [Google::Apis::CloudassetV1::ZypperPatch]
attr_accessor :zypper_patch
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@apt_package = args[:apt_package] if args.key?(:apt_package)
@cos_package = args[:cos_package] if args.key?(:cos_package)
@googet_package = args[:googet_package] if args.key?(:googet_package)
@qfe_package = args[:qfe_package] if args.key?(:qfe_package)
@wua_package = args[:wua_package] if args.key?(:wua_package)
@yum_package = args[:yum_package] if args.key?(:yum_package)
@zypper_package = args[:zypper_package] if args.key?(:zypper_package)
@zypper_patch = args[:zypper_patch] if args.key?(:zypper_patch)
end
end
# The `Status` type defines a logical error model that is suitable for different
# programming environments, including REST APIs and RPC APIs. It is used by [
# gRPC](https://github.com/grpc). Each `Status` message contains three pieces of
# data: error code, error message, and error details. You can find out more
# about this error model and how to work with it in the [API Design Guide](https:
# //cloud.google.com/apis/design/errors).
class Status
include Google::Apis::Core::Hashable
# The status code, which should be an enum value of google.rpc.Code.
# Corresponds to the JSON property `code`
# @return [Fixnum]
attr_accessor :code
# A list of messages that carry the error details. There is a common set of
# message types for APIs to use.
# Corresponds to the JSON property `details`
# @return [Array<Hash<String,Object>>]
attr_accessor :details
# A developer-facing error message, which should be in English. Any user-facing
# error message should be localized and sent in the google.rpc.Status.details
# field, or localized by the client.
# Corresponds to the JSON property `message`
# @return [String]
attr_accessor :message
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@code = args[:code] if args.key?(:code)
@details = args[:details] if args.key?(:details)
@message = args[:message] if args.key?(:message)
end
end
# An asset in Google Cloud and its temporal metadata, including the time window
# when it was observed and its status during that window.
class TemporalAsset
include Google::Apis::Core::Hashable
# An asset in Google Cloud. An asset can be any resource in the Google Cloud [
# resource hierarchy](https://cloud.google.com/resource-manager/docs/cloud-
# platform-resource-hierarchy), a resource outside the Google Cloud resource
# hierarchy (such as Google Kubernetes Engine clusters and objects), or a policy
# (e.g. Cloud IAM policy). See [Supported asset types](https://cloud.google.com/
# asset-inventory/docs/supported-asset-types) for more information.
# Corresponds to the JSON property `asset`
# @return [Google::Apis::CloudassetV1::Asset]
attr_accessor :asset
# Whether the asset has been deleted or not.
# Corresponds to the JSON property `deleted`
# @return [Boolean]
attr_accessor :deleted
alias_method :deleted?, :deleted
# An asset in Google Cloud. An asset can be any resource in the Google Cloud [
# resource hierarchy](https://cloud.google.com/resource-manager/docs/cloud-
# platform-resource-hierarchy), a resource outside the Google Cloud resource
# hierarchy (such as Google Kubernetes Engine clusters and objects), or a policy
# (e.g. Cloud IAM policy). See [Supported asset types](https://cloud.google.com/
# asset-inventory/docs/supported-asset-types) for more information.
# Corresponds to the JSON property `priorAsset`
# @return [Google::Apis::CloudassetV1::Asset]
attr_accessor :prior_asset
# State of prior_asset.
# Corresponds to the JSON property `priorAssetState`
# @return [String]
attr_accessor :prior_asset_state
# A time window specified by its `start_time` and `end_time`.
# Corresponds to the JSON property `window`
# @return [Google::Apis::CloudassetV1::TimeWindow]
attr_accessor :window
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@asset = args[:asset] if args.key?(:asset)
@deleted = args[:deleted] if args.key?(:deleted)
@prior_asset = args[:prior_asset] if args.key?(:prior_asset)
@prior_asset_state = args[:prior_asset_state] if args.key?(:prior_asset_state)
@window = args[:window] if args.key?(:window)
end
end
# A time window specified by its `start_time` and `end_time`.
class TimeWindow
include Google::Apis::Core::Hashable
# End time of the time window (inclusive). If not specified, the current
# timestamp is used instead.
# Corresponds to the JSON property `endTime`
# @return [String]
attr_accessor :end_time
# Start time of the time window (exclusive).
# Corresponds to the JSON property `startTime`
# @return [String]
attr_accessor :start_time
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@end_time = args[:end_time] if args.key?(:end_time)
@start_time = args[:start_time] if args.key?(:start_time)
end
end
# Update asset feed request.
class UpdateFeedRequest
include Google::Apis::Core::Hashable
# An asset feed used to export asset updates to a destinations. An asset feed
# filter controls what updates are exported. The asset feed must be created
# within a project, organization, or folder. Supported destinations are: Pub/Sub
# topics.
# Corresponds to the JSON property `feed`
# @return [Google::Apis::CloudassetV1::Feed]
attr_accessor :feed
# Required. Only updates the `feed` fields indicated by this mask. The field
# mask must not be empty, and it must not contain fields that are immutable or
# only set by the server.
# Corresponds to the JSON property `updateMask`
# @return [String]
attr_accessor :update_mask
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@feed = args[:feed] if args.key?(:feed)
@update_mask = args[:update_mask] if args.key?(:update_mask)
end
end
# Information related to the a standard versioned package. This includes package
# info for APT, Yum, Zypper, and Googet package managers.
class VersionedPackage
include Google::Apis::Core::Hashable
# The system architecture this package is intended for.
# Corresponds to the JSON property `architecture`
# @return [String]
attr_accessor :architecture
# The name of the package.
# Corresponds to the JSON property `packageName`
# @return [String]
attr_accessor :package_name
# The version of the package.
# Corresponds to the JSON property `version`
# @return [String]
attr_accessor :version
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@architecture = args[:architecture] if args.key?(:architecture)
@package_name = args[:package_name] if args.key?(:package_name)
@version = args[:version] if args.key?(:version)
end
end
# Information related to a Quick Fix Engineering package. Fields are taken from
# Windows QuickFixEngineering Interface and match the source names: https://docs.
# microsoft.com/en-us/windows/win32/cimwin32prov/win32-quickfixengineering
class WindowsQuickFixEngineeringPackage
include Google::Apis::Core::Hashable
# A short textual description of the QFE update.
# Corresponds to the JSON property `caption`
# @return [String]
attr_accessor :caption
# A textual description of the QFE update.
# Corresponds to the JSON property `description`
# @return [String]
attr_accessor :description
# Unique identifier associated with a particular QFE update.
# Corresponds to the JSON property `hotFixId`
# @return [String]
attr_accessor :hot_fix_id
# Date that the QFE update was installed. Mapped from installed_on field.
# Corresponds to the JSON property `installTime`
# @return [String]
attr_accessor :install_time
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@caption = args[:caption] if args.key?(:caption)
@description = args[:description] if args.key?(:description)
@hot_fix_id = args[:hot_fix_id] if args.key?(:hot_fix_id)
@install_time = args[:install_time] if args.key?(:install_time)
end
end
# Categories specified by the Windows Update.
class WindowsUpdateCategory
include Google::Apis::Core::Hashable
# The identifier of the windows update category.
# Corresponds to the JSON property `id`
# @return [String]
attr_accessor :id
# The name of the windows update category.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@id = args[:id] if args.key?(:id)
@name = args[:name] if args.key?(:name)
end
end
# Details related to a Windows Update package. Field data and names are taken
# from Windows Update API IUpdate Interface: https://docs.microsoft.com/en-us/
# windows/win32/api/_wua/ Descriptive fields like title, and description are
# localized based on the locale of the VM being updated.
class WindowsUpdatePackage
include Google::Apis::Core::Hashable
# The categories that are associated with this update package.
# Corresponds to the JSON property `categories`
# @return [Array<Google::Apis::CloudassetV1::WindowsUpdateCategory>]
attr_accessor :categories
# The localized description of the update package.
# Corresponds to the JSON property `description`
# @return [String]
attr_accessor :description
# A collection of Microsoft Knowledge Base article IDs that are associated with
# the update package.
# Corresponds to the JSON property `kbArticleIds`
# @return [Array<String>]
attr_accessor :kb_article_ids
# The last published date of the update, in (UTC) date and time.
# Corresponds to the JSON property `lastDeploymentChangeTime`
# @return [String]
attr_accessor :last_deployment_change_time
# A collection of URLs that provide more information about the update package.
# Corresponds to the JSON property `moreInfoUrls`
# @return [Array<String>]
attr_accessor :more_info_urls
# The revision number of this update package.
# Corresponds to the JSON property `revisionNumber`
# @return [Fixnum]
attr_accessor :revision_number
# A hyperlink to the language-specific support information for the update.
# Corresponds to the JSON property `supportUrl`
# @return [String]
attr_accessor :support_url
# The localized title of the update package.
# Corresponds to the JSON property `title`
# @return [String]
attr_accessor :title
# Gets the identifier of an update package. Stays the same across revisions.
# Corresponds to the JSON property `updateId`
# @return [String]
attr_accessor :update_id
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@categories = args[:categories] if args.key?(:categories)
@description = args[:description] if args.key?(:description)
@kb_article_ids = args[:kb_article_ids] if args.key?(:kb_article_ids)
@last_deployment_change_time = args[:last_deployment_change_time] if args.key?(:last_deployment_change_time)
@more_info_urls = args[:more_info_urls] if args.key?(:more_info_urls)
@revision_number = args[:revision_number] if args.key?(:revision_number)
@support_url = args[:support_url] if args.key?(:support_url)
@title = args[:title] if args.key?(:title)
@update_id = args[:update_id] if args.key?(:update_id)
end
end
# Details related to a Zypper Patch.
class ZypperPatch
include Google::Apis::Core::Hashable
# The category of the patch.
# Corresponds to the JSON property `category`
# @return [String]
attr_accessor :category
# The name of the patch.
# Corresponds to the JSON property `patchName`
# @return [String]
attr_accessor :patch_name
# The severity specified for this patch
# Corresponds to the JSON property `severity`
# @return [String]
attr_accessor :severity
# Any summary information provided about this patch.
# Corresponds to the JSON property `summary`
# @return [String]
attr_accessor :summary
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@category = args[:category] if args.key?(:category)
@patch_name = args[:patch_name] if args.key?(:patch_name)
@severity = args[:severity] if args.key?(:severity)
@summary = args[:summary] if args.key?(:summary)
end
end
end
end
end