google-api-ruby-client/generated/google/apis/logging_v2beta1/classes.rb

1651 lines
75 KiB
Ruby

# Copyright 2015 Google Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
require 'date'
require 'google/apis/core/base_service'
require 'google/apis/core/json_representation'
require 'google/apis/core/hashable'
require 'google/apis/errors'
module Google
module Apis
module LoggingV2beta1
# BucketOptions describes the bucket boundaries used to create a histogram for
# the distribution. The buckets can be in a linear sequence, an exponential
# sequence, or each bucket can be specified explicitly. BucketOptions does not
# include the number of values in each bucket.A bucket has an inclusive lower
# bound and exclusive upper bound for the values that are counted for that
# bucket. The upper bound of a bucket must be strictly greater than the lower
# bound. The sequence of N buckets for a distribution consists of an underflow
# bucket (number 0), zero or more finite buckets (number 1 through N - 2) and an
# overflow bucket (number N - 1). The buckets are contiguous: the lower bound of
# bucket i (i > 0) is the same as the upper bound of bucket i - 1. The buckets
# span the whole range of finite values: lower bound of the underflow bucket is -
# infinity and the upper bound of the overflow bucket is +infinity. The finite
# buckets are so-called because both bounds are finite.
class BucketOptions
include Google::Apis::Core::Hashable
# Specifies a set of buckets with arbitrary widths.There are size(bounds) + 1 (=
# N) buckets. Bucket i has the following boundaries:Upper bound (0 <= i < N-1):
# boundsi Lower bound (1 <= i < N); boundsi - 1The bounds field must contain at
# least one element. If bounds has only one element, then there are no finite
# buckets, and that single element is the common boundary of the overflow and
# underflow buckets.
# Corresponds to the JSON property `explicitBuckets`
# @return [Google::Apis::LoggingV2beta1::Explicit]
attr_accessor :explicit_buckets
# Specifies an exponential sequence of buckets that have a width that is
# proportional to the value of the lower bound. Each bucket represents a
# constant relative uncertainty on a specific value in the bucket.There are
# num_finite_buckets + 2 (= N) buckets. Bucket i has the following boundaries:
# Upper bound (0 <= i < N-1): scale * (growth_factor ^ i). Lower bound (1 <= i <
# N): scale * (growth_factor ^ (i - 1)).
# Corresponds to the JSON property `exponentialBuckets`
# @return [Google::Apis::LoggingV2beta1::Exponential]
attr_accessor :exponential_buckets
# Specifies a linear sequence of buckets that all have the same width (except
# overflow and underflow). Each bucket represents a constant absolute
# uncertainty on the specific value in the bucket.There are num_finite_buckets +
# 2 (= N) buckets. Bucket i has the following boundaries:Upper bound (0 <= i < N-
# 1): offset + (width * i). Lower bound (1 <= i < N): offset + (width * (i - 1))
# .
# Corresponds to the JSON property `linearBuckets`
# @return [Google::Apis::LoggingV2beta1::Linear]
attr_accessor :linear_buckets
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@explicit_buckets = args[:explicit_buckets] if args.key?(:explicit_buckets)
@exponential_buckets = args[:exponential_buckets] if args.key?(:exponential_buckets)
@linear_buckets = args[:linear_buckets] if args.key?(:linear_buckets)
end
end
# A generic empty message that you can re-use to avoid defining duplicated empty
# messages in your APIs. A typical example is to use it as the request or the
# response type of an API method. For instance:
# service Foo `
# rpc Bar(google.protobuf.Empty) returns (google.protobuf.Empty);
# `
# The JSON representation for Empty is empty JSON object ``.
class Empty
include Google::Apis::Core::Hashable
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
end
end
# Specifies a set of buckets with arbitrary widths.There are size(bounds) + 1 (=
# N) buckets. Bucket i has the following boundaries:Upper bound (0 <= i < N-1):
# boundsi Lower bound (1 <= i < N); boundsi - 1The bounds field must contain at
# least one element. If bounds has only one element, then there are no finite
# buckets, and that single element is the common boundary of the overflow and
# underflow buckets.
class Explicit
include Google::Apis::Core::Hashable
# The values must be monotonically increasing.
# Corresponds to the JSON property `bounds`
# @return [Array<Float>]
attr_accessor :bounds
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@bounds = args[:bounds] if args.key?(:bounds)
end
end
# Specifies an exponential sequence of buckets that have a width that is
# proportional to the value of the lower bound. Each bucket represents a
# constant relative uncertainty on a specific value in the bucket.There are
# num_finite_buckets + 2 (= N) buckets. Bucket i has the following boundaries:
# Upper bound (0 <= i < N-1): scale * (growth_factor ^ i). Lower bound (1 <= i <
# N): scale * (growth_factor ^ (i - 1)).
class Exponential
include Google::Apis::Core::Hashable
# Must be greater than 1.
# Corresponds to the JSON property `growthFactor`
# @return [Float]
attr_accessor :growth_factor
# Must be greater than 0.
# Corresponds to the JSON property `numFiniteBuckets`
# @return [Fixnum]
attr_accessor :num_finite_buckets
# Must be greater than 0.
# Corresponds to the JSON property `scale`
# @return [Float]
attr_accessor :scale
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@growth_factor = args[:growth_factor] if args.key?(:growth_factor)
@num_finite_buckets = args[:num_finite_buckets] if args.key?(:num_finite_buckets)
@scale = args[:scale] if args.key?(:scale)
end
end
# A common proto for logging HTTP requests. Only contains semantics defined by
# the HTTP specification. Product-specific logging information MUST be defined
# in a separate message.
class HttpRequest
include Google::Apis::Core::Hashable
# The number of HTTP response bytes inserted into cache. Set only when a cache
# fill was attempted.
# Corresponds to the JSON property `cacheFillBytes`
# @return [Fixnum]
attr_accessor :cache_fill_bytes
# Whether or not an entity was served from cache (with or without validation).
# Corresponds to the JSON property `cacheHit`
# @return [Boolean]
attr_accessor :cache_hit
alias_method :cache_hit?, :cache_hit
# Whether or not a cache lookup was attempted.
# Corresponds to the JSON property `cacheLookup`
# @return [Boolean]
attr_accessor :cache_lookup
alias_method :cache_lookup?, :cache_lookup
# Whether or not the response was validated with the origin server before being
# served from cache. This field is only meaningful if cache_hit is True.
# Corresponds to the JSON property `cacheValidatedWithOriginServer`
# @return [Boolean]
attr_accessor :cache_validated_with_origin_server
alias_method :cache_validated_with_origin_server?, :cache_validated_with_origin_server
# The request processing latency on the server, from the time the request was
# received until the response was sent.
# Corresponds to the JSON property `latency`
# @return [String]
attr_accessor :latency
# Protocol used for the request. Examples: "HTTP/1.1", "HTTP/2", "websocket"
# Corresponds to the JSON property `protocol`
# @return [String]
attr_accessor :protocol
# The referer URL of the request, as defined in HTTP/1.1 Header Field
# Definitions (http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html).
# Corresponds to the JSON property `referer`
# @return [String]
attr_accessor :referer
# The IP address (IPv4 or IPv6) of the client that issued the HTTP request.
# Examples: "192.168.1.1", "FE80::0202:B3FF:FE1E:8329".
# Corresponds to the JSON property `remoteIp`
# @return [String]
attr_accessor :remote_ip
# The request method. Examples: "GET", "HEAD", "PUT", "POST".
# Corresponds to the JSON property `requestMethod`
# @return [String]
attr_accessor :request_method
# The size of the HTTP request message in bytes, including the request headers
# and the request body.
# Corresponds to the JSON property `requestSize`
# @return [Fixnum]
attr_accessor :request_size
# The scheme (http, https), the host name, the path and the query portion of the
# URL that was requested. Example: "http://example.com/some/info?color=red".
# Corresponds to the JSON property `requestUrl`
# @return [String]
attr_accessor :request_url
# The size of the HTTP response message sent back to the client, in bytes,
# including the response headers and the response body.
# Corresponds to the JSON property `responseSize`
# @return [Fixnum]
attr_accessor :response_size
# The IP address (IPv4 or IPv6) of the origin server that the request was sent
# to.
# Corresponds to the JSON property `serverIp`
# @return [String]
attr_accessor :server_ip
# The response code indicating the status of response. Examples: 200, 404.
# Corresponds to the JSON property `status`
# @return [Fixnum]
attr_accessor :status
# The user agent sent by the client. Example: "Mozilla/4.0 (compatible; MSIE 6.0;
# Windows 98; Q312461; .NET CLR 1.0.3705)".
# Corresponds to the JSON property `userAgent`
# @return [String]
attr_accessor :user_agent
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@cache_fill_bytes = args[:cache_fill_bytes] if args.key?(:cache_fill_bytes)
@cache_hit = args[:cache_hit] if args.key?(:cache_hit)
@cache_lookup = args[:cache_lookup] if args.key?(:cache_lookup)
@cache_validated_with_origin_server = args[:cache_validated_with_origin_server] if args.key?(:cache_validated_with_origin_server)
@latency = args[:latency] if args.key?(:latency)
@protocol = args[:protocol] if args.key?(:protocol)
@referer = args[:referer] if args.key?(:referer)
@remote_ip = args[:remote_ip] if args.key?(:remote_ip)
@request_method = args[:request_method] if args.key?(:request_method)
@request_size = args[:request_size] if args.key?(:request_size)
@request_url = args[:request_url] if args.key?(:request_url)
@response_size = args[:response_size] if args.key?(:response_size)
@server_ip = args[:server_ip] if args.key?(:server_ip)
@status = args[:status] if args.key?(:status)
@user_agent = args[:user_agent] if args.key?(:user_agent)
end
end
# A description of a label.
class LabelDescriptor
include Google::Apis::Core::Hashable
# A human-readable description for the label.
# Corresponds to the JSON property `description`
# @return [String]
attr_accessor :description
# The label key.
# Corresponds to the JSON property `key`
# @return [String]
attr_accessor :key
# The type of data that can be assigned to the label.
# Corresponds to the JSON property `valueType`
# @return [String]
attr_accessor :value_type
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@description = args[:description] if args.key?(:description)
@key = args[:key] if args.key?(:key)
@value_type = args[:value_type] if args.key?(:value_type)
end
end
# Specifies a linear sequence of buckets that all have the same width (except
# overflow and underflow). Each bucket represents a constant absolute
# uncertainty on the specific value in the bucket.There are num_finite_buckets +
# 2 (= N) buckets. Bucket i has the following boundaries:Upper bound (0 <= i < N-
# 1): offset + (width * i). Lower bound (1 <= i < N): offset + (width * (i - 1))
# .
class Linear
include Google::Apis::Core::Hashable
# Must be greater than 0.
# Corresponds to the JSON property `numFiniteBuckets`
# @return [Fixnum]
attr_accessor :num_finite_buckets
# Lower bound of the first bucket.
# Corresponds to the JSON property `offset`
# @return [Float]
attr_accessor :offset
# Must be greater than 0.
# Corresponds to the JSON property `width`
# @return [Float]
attr_accessor :width
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@num_finite_buckets = args[:num_finite_buckets] if args.key?(:num_finite_buckets)
@offset = args[:offset] if args.key?(:offset)
@width = args[:width] if args.key?(:width)
end
end
# The parameters to ListLogEntries.
class ListLogEntriesRequest
include Google::Apis::Core::Hashable
# Optional. A filter that chooses which log entries to return. See Advanced Logs
# Filters. Only log entries that match the filter are returned. An empty filter
# matches all log entries in the resources listed in resource_names. Referencing
# a parent resource that is not listed in resource_names will cause the filter
# to return no results. The maximum length of the filter is 20000 characters.
# Corresponds to the JSON property `filter`
# @return [String]
attr_accessor :filter
# Optional. How the results should be sorted. Presently, the only permitted
# values are "timestamp asc" (default) and "timestamp desc". The first option
# returns entries in order of increasing values of LogEntry.timestamp (oldest
# first), and the second option returns entries in order of decreasing
# timestamps (newest first). Entries with equal timestamps are returned in order
# of their insert_id values.
# Corresponds to the JSON property `orderBy`
# @return [String]
attr_accessor :order_by
# Optional. The maximum number of results to return from this request. Non-
# positive values are ignored. The presence of next_page_token in the response
# indicates that more results might be available.
# Corresponds to the JSON property `pageSize`
# @return [Fixnum]
attr_accessor :page_size
# Optional. If present, then retrieve the next batch of results from the
# preceding call to this method. page_token must be the value of next_page_token
# from the previous response. The values of other method parameters should be
# identical to those in the previous call.
# Corresponds to the JSON property `pageToken`
# @return [String]
attr_accessor :page_token
# Deprecated. Use resource_names instead. One or more project identifiers or
# project numbers from which to retrieve log entries. Example: "my-project-1A".
# If present, these project identifiers are converted to resource name format
# and added to the list of resources in resource_names.
# Corresponds to the JSON property `projectIds`
# @return [Array<String>]
attr_accessor :project_ids
# Required. Names of one or more parent resources from which to retrieve log
# entries:
# "projects/[PROJECT_ID]"
# "organizations/[ORGANIZATION_ID]"
# "billingAccounts/[BILLING_ACCOUNT_ID]"
# "folders/[FOLDER_ID]"
# Projects listed in the project_ids field are added to this list.
# Corresponds to the JSON property `resourceNames`
# @return [Array<String>]
attr_accessor :resource_names
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@filter = args[:filter] if args.key?(:filter)
@order_by = args[:order_by] if args.key?(:order_by)
@page_size = args[:page_size] if args.key?(:page_size)
@page_token = args[:page_token] if args.key?(:page_token)
@project_ids = args[:project_ids] if args.key?(:project_ids)
@resource_names = args[:resource_names] if args.key?(:resource_names)
end
end
# Result returned from ListLogEntries.
class ListLogEntriesResponse
include Google::Apis::Core::Hashable
# A list of log entries. If entries is empty, nextPageToken may still be
# returned, indicating that more entries may exist. See nextPageToken for more
# information.
# Corresponds to the JSON property `entries`
# @return [Array<Google::Apis::LoggingV2beta1::LogEntry>]
attr_accessor :entries
# If there might be more results than those appearing in this response, then
# nextPageToken is included. To get the next set of results, call this method
# again using the value of nextPageToken as pageToken.If a value for
# next_page_token appears and the entries field is empty, it means that the
# search found no log entries so far but it did not have time to search all the
# possible log entries. Retry the method with this value for page_token to
# continue the search. Alternatively, consider speeding up the search by
# changing your filter to specify a single log name or resource type, or to
# narrow the time range of the search.
# Corresponds to the JSON property `nextPageToken`
# @return [String]
attr_accessor :next_page_token
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@entries = args[:entries] if args.key?(:entries)
@next_page_token = args[:next_page_token] if args.key?(:next_page_token)
end
end
# Result returned from ListLogMetrics.
class ListLogMetricsResponse
include Google::Apis::Core::Hashable
# A list of logs-based metrics.
# Corresponds to the JSON property `metrics`
# @return [Array<Google::Apis::LoggingV2beta1::LogMetric>]
attr_accessor :metrics
# If there might be more results than appear in this response, then
# nextPageToken is included. To get the next set of results, call this method
# again using the value of nextPageToken as pageToken.
# Corresponds to the JSON property `nextPageToken`
# @return [String]
attr_accessor :next_page_token
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@metrics = args[:metrics] if args.key?(:metrics)
@next_page_token = args[:next_page_token] if args.key?(:next_page_token)
end
end
# Result returned from ListLogs.
class ListLogsResponse
include Google::Apis::Core::Hashable
# A list of log names. For example, "projects/my-project/syslog" or "
# organizations/123/cloudresourcemanager.googleapis.com%2Factivity".
# Corresponds to the JSON property `logNames`
# @return [Array<String>]
attr_accessor :log_names
# If there might be more results than those appearing in this response, then
# nextPageToken is included. To get the next set of results, call this method
# again using the value of nextPageToken as pageToken.
# Corresponds to the JSON property `nextPageToken`
# @return [String]
attr_accessor :next_page_token
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@log_names = args[:log_names] if args.key?(:log_names)
@next_page_token = args[:next_page_token] if args.key?(:next_page_token)
end
end
# Result returned from ListMonitoredResourceDescriptors.
class ListMonitoredResourceDescriptorsResponse
include Google::Apis::Core::Hashable
# If there might be more results than those appearing in this response, then
# nextPageToken is included. To get the next set of results, call this method
# again using the value of nextPageToken as pageToken.
# Corresponds to the JSON property `nextPageToken`
# @return [String]
attr_accessor :next_page_token
# A list of resource descriptors.
# Corresponds to the JSON property `resourceDescriptors`
# @return [Array<Google::Apis::LoggingV2beta1::MonitoredResourceDescriptor>]
attr_accessor :resource_descriptors
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@next_page_token = args[:next_page_token] if args.key?(:next_page_token)
@resource_descriptors = args[:resource_descriptors] if args.key?(:resource_descriptors)
end
end
# Result returned from ListSinks.
class ListSinksResponse
include Google::Apis::Core::Hashable
# If there might be more results than appear in this response, then
# nextPageToken is included. To get the next set of results, call the same
# method again using the value of nextPageToken as pageToken.
# Corresponds to the JSON property `nextPageToken`
# @return [String]
attr_accessor :next_page_token
# A list of sinks.
# Corresponds to the JSON property `sinks`
# @return [Array<Google::Apis::LoggingV2beta1::LogSink>]
attr_accessor :sinks
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@next_page_token = args[:next_page_token] if args.key?(:next_page_token)
@sinks = args[:sinks] if args.key?(:sinks)
end
end
# An individual entry in a log.
class LogEntry
include Google::Apis::Core::Hashable
# A common proto for logging HTTP requests. Only contains semantics defined by
# the HTTP specification. Product-specific logging information MUST be defined
# in a separate message.
# Corresponds to the JSON property `httpRequest`
# @return [Google::Apis::LoggingV2beta1::HttpRequest]
attr_accessor :http_request
# Optional. A unique identifier for the log entry. If you provide a value, then
# Stackdriver Logging considers other log entries in the same project, with the
# same timestamp, and with the same insert_id to be duplicates which can be
# removed. If omitted in new log entries, then Stackdriver Logging assigns its
# own unique identifier. The insert_id is also used to order log entries that
# have the same timestamp value.
# Corresponds to the JSON property `insertId`
# @return [String]
attr_accessor :insert_id
# The log entry payload, represented as a structure that is expressed as a JSON
# object.
# Corresponds to the JSON property `jsonPayload`
# @return [Hash<String,Object>]
attr_accessor :json_payload
# Optional. A set of user-defined (key, value) data that provides additional
# information about the log entry.
# Corresponds to the JSON property `labels`
# @return [Hash<String,String>]
attr_accessor :labels
# Required. The resource name of the log to which this log entry belongs:
# "projects/[PROJECT_ID]/logs/[LOG_ID]"
# "organizations/[ORGANIZATION_ID]/logs/[LOG_ID]"
# "billingAccounts/[BILLING_ACCOUNT_ID]/logs/[LOG_ID]"
# "folders/[FOLDER_ID]/logs/[LOG_ID]"
# [LOG_ID] must be URL-encoded within log_name. Example: "organizations/
# 1234567890/logs/cloudresourcemanager.googleapis.com%2Factivity". [LOG_ID] must
# be less than 512 characters long and can only include the following characters:
# upper and lower case alphanumeric characters, forward-slash, underscore,
# hyphen, and period.For backward compatibility, if log_name begins with a
# forward-slash, such as /projects/..., then the log entry is ingested as usual
# but the forward-slash is removed. Listing the log entry will not show the
# leading slash and filtering for a log name with a leading slash will never
# return any results.
# Corresponds to the JSON property `logName`
# @return [String]
attr_accessor :log_name
# Additional information about a potentially long-running operation with which a
# log entry is associated.
# Corresponds to the JSON property `operation`
# @return [Google::Apis::LoggingV2beta1::LogEntryOperation]
attr_accessor :operation
# The log entry payload, represented as a protocol buffer. Some Google Cloud
# Platform services use this field for their log entry payloads.
# Corresponds to the JSON property `protoPayload`
# @return [Hash<String,Object>]
attr_accessor :proto_payload
# Output only. The time the log entry was received by Stackdriver Logging.
# Corresponds to the JSON property `receiveTimestamp`
# @return [String]
attr_accessor :receive_timestamp
# An object representing a resource that can be used for monitoring, logging,
# billing, or other purposes. Examples include virtual machine instances,
# databases, and storage devices such as disks. The type field identifies a
# MonitoredResourceDescriptor object that describes the resource's schema.
# Information in the labels field identifies the actual resource and its
# attributes according to the schema. For example, a particular Compute Engine
# VM instance could be represented by the following object, because the
# MonitoredResourceDescriptor for "gce_instance" has labels "instance_id" and "
# zone":
# ` "type": "gce_instance",
# "labels": ` "instance_id": "12345678901234",
# "zone": "us-central1-a" ``
# Corresponds to the JSON property `resource`
# @return [Google::Apis::LoggingV2beta1::MonitoredResource]
attr_accessor :resource
# Optional. The severity of the log entry. The default value is LogSeverity.
# DEFAULT.
# Corresponds to the JSON property `severity`
# @return [String]
attr_accessor :severity
# Additional information about the source code location that produced the log
# entry.
# Corresponds to the JSON property `sourceLocation`
# @return [Google::Apis::LoggingV2beta1::LogEntrySourceLocation]
attr_accessor :source_location
# The log entry payload, represented as a Unicode string (UTF-8).
# Corresponds to the JSON property `textPayload`
# @return [String]
attr_accessor :text_payload
# Optional. The time the event described by the log entry occurred. This time is
# used to compute the log entry's age and to enforce the logs retention period.
# If this field is omitted in a new log entry, then Stackdriver Logging assigns
# it the current time.Incoming log entries should have timestamps that are no
# more than the logs retention period in the past, and no more than 24 hours in
# the future. See the entries.write API method for more information.
# Corresponds to the JSON property `timestamp`
# @return [String]
attr_accessor :timestamp
# Optional. Resource name of the trace associated with the log entry, if any. If
# it contains a relative resource name, the name is assumed to be relative to //
# tracing.googleapis.com. Example: projects/my-projectid/traces/
# 06796866738c859f2f19b7cfb3214824
# Corresponds to the JSON property `trace`
# @return [String]
attr_accessor :trace
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@http_request = args[:http_request] if args.key?(:http_request)
@insert_id = args[:insert_id] if args.key?(:insert_id)
@json_payload = args[:json_payload] if args.key?(:json_payload)
@labels = args[:labels] if args.key?(:labels)
@log_name = args[:log_name] if args.key?(:log_name)
@operation = args[:operation] if args.key?(:operation)
@proto_payload = args[:proto_payload] if args.key?(:proto_payload)
@receive_timestamp = args[:receive_timestamp] if args.key?(:receive_timestamp)
@resource = args[:resource] if args.key?(:resource)
@severity = args[:severity] if args.key?(:severity)
@source_location = args[:source_location] if args.key?(:source_location)
@text_payload = args[:text_payload] if args.key?(:text_payload)
@timestamp = args[:timestamp] if args.key?(:timestamp)
@trace = args[:trace] if args.key?(:trace)
end
end
# Additional information about a potentially long-running operation with which a
# log entry is associated.
class LogEntryOperation
include Google::Apis::Core::Hashable
# Optional. Set this to True if this is the first log entry in the operation.
# Corresponds to the JSON property `first`
# @return [Boolean]
attr_accessor :first
alias_method :first?, :first
# Optional. An arbitrary operation identifier. Log entries with the same
# identifier are assumed to be part of the same operation.
# Corresponds to the JSON property `id`
# @return [String]
attr_accessor :id
# Optional. Set this to True if this is the last log entry in the operation.
# Corresponds to the JSON property `last`
# @return [Boolean]
attr_accessor :last
alias_method :last?, :last
# Optional. An arbitrary producer identifier. The combination of id and producer
# must be globally unique. Examples for producer: "MyDivision.MyBigCompany.com",
# "github.com/MyProject/MyApplication".
# Corresponds to the JSON property `producer`
# @return [String]
attr_accessor :producer
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@first = args[:first] if args.key?(:first)
@id = args[:id] if args.key?(:id)
@last = args[:last] if args.key?(:last)
@producer = args[:producer] if args.key?(:producer)
end
end
# Additional information about the source code location that produced the log
# entry.
class LogEntrySourceLocation
include Google::Apis::Core::Hashable
# Optional. Source file name. Depending on the runtime environment, this might
# be a simple name or a fully-qualified name.
# Corresponds to the JSON property `file`
# @return [String]
attr_accessor :file
# Optional. Human-readable name of the function or method being invoked, with
# optional context such as the class or package name. This information may be
# used in contexts such as the logs viewer, where a file and line number are
# less meaningful. The format can vary by language. For example: qual.if.ied.
# Class.method (Java), dir/package.func (Go), function (Python).
# Corresponds to the JSON property `function`
# @return [String]
attr_accessor :function
# Optional. Line within the source file. 1-based; 0 indicates no line number
# available.
# Corresponds to the JSON property `line`
# @return [Fixnum]
attr_accessor :line
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@file = args[:file] if args.key?(:file)
@function = args[:function] if args.key?(:function)
@line = args[:line] if args.key?(:line)
end
end
# Application log line emitted while processing a request.
class LogLine
include Google::Apis::Core::Hashable
# App-provided log message.
# Corresponds to the JSON property `logMessage`
# @return [String]
attr_accessor :log_message
# Severity of this log entry.
# Corresponds to the JSON property `severity`
# @return [String]
attr_accessor :severity
# Specifies a location in a source code file.
# Corresponds to the JSON property `sourceLocation`
# @return [Google::Apis::LoggingV2beta1::SourceLocation]
attr_accessor :source_location
# Approximate time when this log entry was made.
# Corresponds to the JSON property `time`
# @return [String]
attr_accessor :time
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@log_message = args[:log_message] if args.key?(:log_message)
@severity = args[:severity] if args.key?(:severity)
@source_location = args[:source_location] if args.key?(:source_location)
@time = args[:time] if args.key?(:time)
end
end
# Describes a logs-based metric. The value of the metric is the number of log
# entries that match a logs filter in a given time interval.Logs-based metric
# can also be used to extract values from logs and create a a distribution of
# the values. The distribution records the statistics of the extracted values
# along with an optional histogram of the values as specified by the bucket
# options.
class LogMetric
include Google::Apis::Core::Hashable
# BucketOptions describes the bucket boundaries used to create a histogram for
# the distribution. The buckets can be in a linear sequence, an exponential
# sequence, or each bucket can be specified explicitly. BucketOptions does not
# include the number of values in each bucket.A bucket has an inclusive lower
# bound and exclusive upper bound for the values that are counted for that
# bucket. The upper bound of a bucket must be strictly greater than the lower
# bound. The sequence of N buckets for a distribution consists of an underflow
# bucket (number 0), zero or more finite buckets (number 1 through N - 2) and an
# overflow bucket (number N - 1). The buckets are contiguous: the lower bound of
# bucket i (i > 0) is the same as the upper bound of bucket i - 1. The buckets
# span the whole range of finite values: lower bound of the underflow bucket is -
# infinity and the upper bound of the overflow bucket is +infinity. The finite
# buckets are so-called because both bounds are finite.
# Corresponds to the JSON property `bucketOptions`
# @return [Google::Apis::LoggingV2beta1::BucketOptions]
attr_accessor :bucket_options
# Optional. A description of this metric, which is used in documentation.
# Corresponds to the JSON property `description`
# @return [String]
attr_accessor :description
# Required. An advanced logs filter which is used to match log entries. Example:
# "resource.type=gae_app AND severity>=ERROR"
# The maximum length of the filter is 20000 characters.
# Corresponds to the JSON property `filter`
# @return [String]
attr_accessor :filter
# Optional. A map from a label key string to an extractor expression which is
# used to extract data from a log entry field and assign as the label value.
# Each label key specified in the LabelDescriptor must have an associated
# extractor expression in this map. The syntax of the extractor expression is
# the same as for the value_extractor field.The extracted value is converted to
# the type defined in the label descriptor. If the either the extraction or the
# type conversion fails, the label will have a default value. The default value
# for a string label is an empty string, for an integer label its 0, and for a
# boolean label its false.Note that there are upper bounds on the maximum number
# of labels and the number of active time series that are allowed in a project.
# Corresponds to the JSON property `labelExtractors`
# @return [Hash<String,String>]
attr_accessor :label_extractors
# Defines a metric type and its schema. Once a metric descriptor is created,
# deleting or altering it stops data collection and makes the metric type's
# existing data unusable.
# Corresponds to the JSON property `metricDescriptor`
# @return [Google::Apis::LoggingV2beta1::MetricDescriptor]
attr_accessor :metric_descriptor
# Required. The client-assigned metric identifier. Examples: "error_count", "
# nginx/requests".Metric identifiers are limited to 100 characters and can
# include only the following characters: A-Z, a-z, 0-9, and the special
# characters _-.,+!*',()%/. The forward-slash character (/) denotes a hierarchy
# of name pieces, and it cannot be the first character of the name.The metric
# identifier in this field must not be URL-encoded (https://en.wikipedia.org/
# wiki/Percent-encoding). However, when the metric identifier appears as the [
# METRIC_ID] part of a metric_name API parameter, then the metric identifier
# must be URL-encoded. Example: "projects/my-project/metrics/nginx%2Frequests".
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# Optional. A value_extractor is required when using a distribution logs-based
# metric to extract the values to record from a log entry. Two functions are
# supported for value extraction: EXTRACT(field) or REGEXP_EXTRACT(field, regex).
# The argument are: 1. field: The name of the log entry field from which the
# value is to be extracted. 2. regex: A regular expression using the Google
# RE2 syntax (https://github.com/google/re2/wiki/Syntax) with a single capture
# group to extract data from the specified log entry field. The value of the
# field is converted to a string before applying the regex. It is an error to
# specify a regex that does not include exactly one capture group.The result of
# the extraction must be convertible to a double type, as the distribution
# always records double values. If either the extraction or the conversion to
# double fails, then those values are not recorded in the distribution.Example:
# REGEXP_EXTRACT(jsonPayload.request, ".*quantity=(\d+).*")
# Corresponds to the JSON property `valueExtractor`
# @return [String]
attr_accessor :value_extractor
# Deprecated. The API version that created or updated this metric. The v2 format
# is used by default and cannot be changed.
# Corresponds to the JSON property `version`
# @return [String]
attr_accessor :version
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@bucket_options = args[:bucket_options] if args.key?(:bucket_options)
@description = args[:description] if args.key?(:description)
@filter = args[:filter] if args.key?(:filter)
@label_extractors = args[:label_extractors] if args.key?(:label_extractors)
@metric_descriptor = args[:metric_descriptor] if args.key?(:metric_descriptor)
@name = args[:name] if args.key?(:name)
@value_extractor = args[:value_extractor] if args.key?(:value_extractor)
@version = args[:version] if args.key?(:version)
end
end
# Describes a sink used to export log entries to one of the following
# destinations in any project: a Cloud Storage bucket, a BigQuery dataset, or a
# Cloud Pub/Sub topic. A logs filter controls which log entries are exported.
# The sink must be created within a project, organization, billing account, or
# folder.
class LogSink
include Google::Apis::Core::Hashable
# Required. The export destination:
# "storage.googleapis.com/[GCS_BUCKET]"
# "bigquery.googleapis.com/projects/[PROJECT_ID]/datasets/[DATASET]"
# "pubsub.googleapis.com/projects/[PROJECT_ID]/topics/[TOPIC_ID]"
# The sink's writer_identity, set when the sink is created, must have permission
# to write to the destination or else the log entries are not exported. For more
# information, see Exporting Logs With Sinks.
# Corresponds to the JSON property `destination`
# @return [String]
attr_accessor :destination
# Optional. The time at which this sink will stop exporting log entries. Log
# entries are exported only if their timestamp is earlier than the end time. If
# this field is not supplied, there is no end time. If both a start time and an
# end time are provided, then the end time must be later than the start time.
# Corresponds to the JSON property `endTime`
# @return [String]
attr_accessor :end_time
# Optional. An advanced logs filter. The only exported log entries are those
# that are in the resource owning the sink and that match the filter. The filter
# must use the log entry format specified by the output_version_format parameter.
# For example, in the v2 format:
# logName="projects/[PROJECT_ID]/logs/[LOG_ID]" AND severity>=ERROR
# Corresponds to the JSON property `filter`
# @return [String]
attr_accessor :filter
# Optional. This field applies only to sinks owned by organizations and folders.
# If the field is false, the default, only the logs owned by the sink's parent
# resource are available for export. If the field is true, then logs from all
# the projects, folders, and billing accounts contained in the sink's parent
# resource are also available for export. Whether a particular log entry from
# the children is exported depends on the sink's filter expression. For example,
# if this field is true, then the filter resource.type=gce_instance would export
# all Compute Engine VM instance log entries from all projects in the sink's
# parent. To only export entries from certain child projects, filter on the
# project part of the log name:
# logName:("projects/test-project1/" OR "projects/test-project2/") AND
# resource.type=gce_instance
# Corresponds to the JSON property `includeChildren`
# @return [Boolean]
attr_accessor :include_children
alias_method :include_children?, :include_children
# Required. The client-assigned sink identifier, unique within the project.
# Example: "my-syslog-errors-to-pubsub". Sink identifiers are limited to 100
# characters and can include only the following characters: upper and lower-case
# alphanumeric characters, underscores, hyphens, and periods.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# Deprecated. The log entry format to use for this sink's exported log entries.
# The v2 format is used by default and cannot be changed.
# Corresponds to the JSON property `outputVersionFormat`
# @return [String]
attr_accessor :output_version_format
# Optional. The time at which this sink will begin exporting log entries. Log
# entries are exported only if their timestamp is not earlier than the start
# time. The default value of this field is the time the sink is created or
# updated.
# Corresponds to the JSON property `startTime`
# @return [String]
attr_accessor :start_time
# Output only. An IAM identity&mdash;a service account or group&mdash;under
# which Stackdriver Logging writes the exported log entries to the sink's
# destination. This field is set by sinks.create and sinks.update, based on the
# setting of unique_writer_identity in those methods.Until you grant this
# identity write-access to the destination, log entry exports from this sink
# will fail. For more information, see Granting access for a resource. Consult
# the destination service's documentation to determine the appropriate IAM roles
# to assign to the identity.
# Corresponds to the JSON property `writerIdentity`
# @return [String]
attr_accessor :writer_identity
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@destination = args[:destination] if args.key?(:destination)
@end_time = args[:end_time] if args.key?(:end_time)
@filter = args[:filter] if args.key?(:filter)
@include_children = args[:include_children] if args.key?(:include_children)
@name = args[:name] if args.key?(:name)
@output_version_format = args[:output_version_format] if args.key?(:output_version_format)
@start_time = args[:start_time] if args.key?(:start_time)
@writer_identity = args[:writer_identity] if args.key?(:writer_identity)
end
end
# Defines a metric type and its schema. Once a metric descriptor is created,
# deleting or altering it stops data collection and makes the metric type's
# existing data unusable.
class MetricDescriptor
include Google::Apis::Core::Hashable
# A detailed description of the metric, which can be used in documentation.
# Corresponds to the JSON property `description`
# @return [String]
attr_accessor :description
# A concise name for the metric, which can be displayed in user interfaces. Use
# sentence case without an ending period, for example "Request count".
# Corresponds to the JSON property `displayName`
# @return [String]
attr_accessor :display_name
# The set of labels that can be used to describe a specific instance of this
# metric type. For example, the appengine.googleapis.com/http/server/
# response_latencies metric type has a label for the HTTP response code,
# response_code, so you can look at latencies for successful responses or just
# for responses that failed.
# Corresponds to the JSON property `labels`
# @return [Array<Google::Apis::LoggingV2beta1::LabelDescriptor>]
attr_accessor :labels
# Whether the metric records instantaneous values, changes to a value, etc. Some
# combinations of metric_kind and value_type might not be supported.
# Corresponds to the JSON property `metricKind`
# @return [String]
attr_accessor :metric_kind
# The resource name of the metric descriptor. Depending on the implementation,
# the name typically includes: (1) the parent resource name that defines the
# scope of the metric type or of its data; and (2) the metric's URL-encoded type,
# which also appears in the type field of this descriptor. For example,
# following is the resource name of a custom metric within the GCP project my-
# project-id:
# "projects/my-project-id/metricDescriptors/custom.googleapis.com%2Finvoice%
# 2Fpaid%2Famount"
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# The metric type, including its DNS name prefix. The type is not URL-encoded.
# All user-defined custom metric types have the DNS name custom.googleapis.com.
# Metric types should use a natural hierarchical grouping. For example:
# "custom.googleapis.com/invoice/paid/amount"
# "appengine.googleapis.com/http/server/response_latencies"
# Corresponds to the JSON property `type`
# @return [String]
attr_accessor :type
# The unit in which the metric value is reported. It is only applicable if the
# value_type is INT64, DOUBLE, or DISTRIBUTION. The supported units are a subset
# of The Unified Code for Units of Measure (http://unitsofmeasure.org/ucum.html)
# standard:Basic units (UNIT)
# bit bit
# By byte
# s second
# min minute
# h hour
# d dayPrefixes (PREFIX)
# k kilo (10**3)
# M mega (10**6)
# G giga (10**9)
# T tera (10**12)
# P peta (10**15)
# E exa (10**18)
# Z zetta (10**21)
# Y yotta (10**24)
# m milli (10**-3)
# u micro (10**-6)
# n nano (10**-9)
# p pico (10**-12)
# f femto (10**-15)
# a atto (10**-18)
# z zepto (10**-21)
# y yocto (10**-24)
# Ki kibi (2**10)
# Mi mebi (2**20)
# Gi gibi (2**30)
# Ti tebi (2**40)GrammarThe grammar includes the dimensionless unit 1, such as 1/
# s.The grammar also includes these connectors:
# / division (as an infix operator, e.g. 1/s).
# . multiplication (as an infix operator, e.g. GBy.d)The grammar for a unit is
# as follows:
# Expression = Component ` "." Component ` ` "/" Component ` ;
# Component = [ PREFIX ] UNIT [ Annotation ]
# | Annotation
# | "1"
# ;
# Annotation = "`" NAME "`" ;
# Notes:
# Annotation is just a comment if it follows a UNIT and is equivalent to 1 if
# it is used alone. For examples, `requests`/s == 1/s, By`transmitted`/s == By/
# s.
# NAME is a sequence of non-blank printable ASCII characters not containing '`'
# or '`'.
# Corresponds to the JSON property `unit`
# @return [String]
attr_accessor :unit
# Whether the measurement is an integer, a floating-point number, etc. Some
# combinations of metric_kind and value_type might not be supported.
# Corresponds to the JSON property `valueType`
# @return [String]
attr_accessor :value_type
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@description = args[:description] if args.key?(:description)
@display_name = args[:display_name] if args.key?(:display_name)
@labels = args[:labels] if args.key?(:labels)
@metric_kind = args[:metric_kind] if args.key?(:metric_kind)
@name = args[:name] if args.key?(:name)
@type = args[:type] if args.key?(:type)
@unit = args[:unit] if args.key?(:unit)
@value_type = args[:value_type] if args.key?(:value_type)
end
end
# An object representing a resource that can be used for monitoring, logging,
# billing, or other purposes. Examples include virtual machine instances,
# databases, and storage devices such as disks. The type field identifies a
# MonitoredResourceDescriptor object that describes the resource's schema.
# Information in the labels field identifies the actual resource and its
# attributes according to the schema. For example, a particular Compute Engine
# VM instance could be represented by the following object, because the
# MonitoredResourceDescriptor for "gce_instance" has labels "instance_id" and "
# zone":
# ` "type": "gce_instance",
# "labels": ` "instance_id": "12345678901234",
# "zone": "us-central1-a" ``
class MonitoredResource
include Google::Apis::Core::Hashable
# Required. Values for all of the labels listed in the associated monitored
# resource descriptor. For example, Compute Engine VM instances use the labels "
# project_id", "instance_id", and "zone".
# Corresponds to the JSON property `labels`
# @return [Hash<String,String>]
attr_accessor :labels
# Required. The monitored resource type. This field must match the type field of
# a MonitoredResourceDescriptor object. For example, the type of a Compute
# Engine VM instance is gce_instance.
# Corresponds to the JSON property `type`
# @return [String]
attr_accessor :type
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@labels = args[:labels] if args.key?(:labels)
@type = args[:type] if args.key?(:type)
end
end
# An object that describes the schema of a MonitoredResource object using a type
# name and a set of labels. For example, the monitored resource descriptor for
# Google Compute Engine VM instances has a type of "gce_instance" and specifies
# the use of the labels "instance_id" and "zone" to identify particular VM
# instances.Different APIs can support different monitored resource types. APIs
# generally provide a list method that returns the monitored resource
# descriptors used by the API.
class MonitoredResourceDescriptor
include Google::Apis::Core::Hashable
# Optional. A detailed description of the monitored resource type that might be
# used in documentation.
# Corresponds to the JSON property `description`
# @return [String]
attr_accessor :description
# Optional. A concise name for the monitored resource type that might be
# displayed in user interfaces. It should be a Title Cased Noun Phrase, without
# any article or other determiners. For example, "Google Cloud SQL Database".
# Corresponds to the JSON property `displayName`
# @return [String]
attr_accessor :display_name
# Required. A set of labels used to describe instances of this monitored
# resource type. For example, an individual Google Cloud SQL database is
# identified by values for the labels "database_id" and "zone".
# Corresponds to the JSON property `labels`
# @return [Array<Google::Apis::LoggingV2beta1::LabelDescriptor>]
attr_accessor :labels
# Optional. The resource name of the monitored resource descriptor: "projects/`
# project_id`/monitoredResourceDescriptors/`type`" where `type` is the value of
# the type field in this object and `project_id` is a project ID that provides
# API-specific context for accessing the type. APIs that do not use project
# information can use the resource name format "monitoredResourceDescriptors/`
# type`".
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# Required. The monitored resource type. For example, the type "
# cloudsql_database" represents databases in Google Cloud SQL. The maximum
# length of this value is 256 characters.
# Corresponds to the JSON property `type`
# @return [String]
attr_accessor :type
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@description = args[:description] if args.key?(:description)
@display_name = args[:display_name] if args.key?(:display_name)
@labels = args[:labels] if args.key?(:labels)
@name = args[:name] if args.key?(:name)
@type = args[:type] if args.key?(:type)
end
end
# Complete log information about a single HTTP request to an App Engine
# application.
class RequestLog
include Google::Apis::Core::Hashable
# App Engine release version.
# Corresponds to the JSON property `appEngineRelease`
# @return [String]
attr_accessor :app_engine_release
# Application that handled this request.
# Corresponds to the JSON property `appId`
# @return [String]
attr_accessor :app_id
# An indication of the relative cost of serving this request.
# Corresponds to the JSON property `cost`
# @return [Float]
attr_accessor :cost
# Time when the request finished.
# Corresponds to the JSON property `endTime`
# @return [String]
attr_accessor :end_time
# Whether this request is finished or active.
# Corresponds to the JSON property `finished`
# @return [Boolean]
attr_accessor :finished
alias_method :finished?, :finished
# Whether this is the first RequestLog entry for this request. If an active
# request has several RequestLog entries written to Stackdriver Logging, then
# this field will be set for one of them.
# Corresponds to the JSON property `first`
# @return [Boolean]
attr_accessor :first
alias_method :first?, :first
# Internet host and port number of the resource being requested.
# Corresponds to the JSON property `host`
# @return [String]
attr_accessor :host
# HTTP version of request. Example: "HTTP/1.1".
# Corresponds to the JSON property `httpVersion`
# @return [String]
attr_accessor :http_version
# An identifier for the instance that handled the request.
# Corresponds to the JSON property `instanceId`
# @return [String]
attr_accessor :instance_id
# If the instance processing this request belongs to a manually scaled module,
# then this is the 0-based index of the instance. Otherwise, this value is -1.
# Corresponds to the JSON property `instanceIndex`
# @return [Fixnum]
attr_accessor :instance_index
# Origin IP address.
# Corresponds to the JSON property `ip`
# @return [String]
attr_accessor :ip
# Latency of the request.
# Corresponds to the JSON property `latency`
# @return [String]
attr_accessor :latency
# A list of log lines emitted by the application while serving this request.
# Corresponds to the JSON property `line`
# @return [Array<Google::Apis::LoggingV2beta1::LogLine>]
attr_accessor :line
# Number of CPU megacycles used to process request.
# Corresponds to the JSON property `megaCycles`
# @return [Fixnum]
attr_accessor :mega_cycles
# Request method. Example: "GET", "HEAD", "PUT", "POST", "DELETE".
# Corresponds to the JSON property `method`
# @return [String]
attr_accessor :method_prop
# Module of the application that handled this request.
# Corresponds to the JSON property `moduleId`
# @return [String]
attr_accessor :module_id
# The logged-in user who made the request.Most likely, this is the part of the
# user's email before the @ sign. The field value is the same for different
# requests from the same user, but different users can have similar names. This
# information is also available to the application via the App Engine Users API.
# This field will be populated starting with App Engine 1.9.21.
# Corresponds to the JSON property `nickname`
# @return [String]
attr_accessor :nickname
# Time this request spent in the pending request queue.
# Corresponds to the JSON property `pendingTime`
# @return [String]
attr_accessor :pending_time
# Referrer URL of request.
# Corresponds to the JSON property `referrer`
# @return [String]
attr_accessor :referrer
# Globally unique identifier for a request, which is based on the request start
# time. Request IDs for requests which started later will compare greater as
# strings than those for requests which started earlier.
# Corresponds to the JSON property `requestId`
# @return [String]
attr_accessor :request_id
# Contains the path and query portion of the URL that was requested. For example,
# if the URL was "http://example.com/app?name=val", the resource would be "/app?
# name=val". The fragment identifier, which is identified by the # character, is
# not included.
# Corresponds to the JSON property `resource`
# @return [String]
attr_accessor :resource
# Size in bytes sent back to client by request.
# Corresponds to the JSON property `responseSize`
# @return [Fixnum]
attr_accessor :response_size
# Source code for the application that handled this request. There can be more
# than one source reference per deployed application if source code is
# distributed among multiple repositories.
# Corresponds to the JSON property `sourceReference`
# @return [Array<Google::Apis::LoggingV2beta1::SourceReference>]
attr_accessor :source_reference
# Time when the request started.
# Corresponds to the JSON property `startTime`
# @return [String]
attr_accessor :start_time
# HTTP response status code. Example: 200, 404.
# Corresponds to the JSON property `status`
# @return [Fixnum]
attr_accessor :status
# Task name of the request, in the case of an offline request.
# Corresponds to the JSON property `taskName`
# @return [String]
attr_accessor :task_name
# Queue name of the request, in the case of an offline request.
# Corresponds to the JSON property `taskQueueName`
# @return [String]
attr_accessor :task_queue_name
# Stackdriver Trace identifier for this request.
# Corresponds to the JSON property `traceId`
# @return [String]
attr_accessor :trace_id
# File or class that handled the request.
# Corresponds to the JSON property `urlMapEntry`
# @return [String]
attr_accessor :url_map_entry
# User agent that made the request.
# Corresponds to the JSON property `userAgent`
# @return [String]
attr_accessor :user_agent
# Version of the application that handled this request.
# Corresponds to the JSON property `versionId`
# @return [String]
attr_accessor :version_id
# Whether this was a loading request for the instance.
# Corresponds to the JSON property `wasLoadingRequest`
# @return [Boolean]
attr_accessor :was_loading_request
alias_method :was_loading_request?, :was_loading_request
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@app_engine_release = args[:app_engine_release] if args.key?(:app_engine_release)
@app_id = args[:app_id] if args.key?(:app_id)
@cost = args[:cost] if args.key?(:cost)
@end_time = args[:end_time] if args.key?(:end_time)
@finished = args[:finished] if args.key?(:finished)
@first = args[:first] if args.key?(:first)
@host = args[:host] if args.key?(:host)
@http_version = args[:http_version] if args.key?(:http_version)
@instance_id = args[:instance_id] if args.key?(:instance_id)
@instance_index = args[:instance_index] if args.key?(:instance_index)
@ip = args[:ip] if args.key?(:ip)
@latency = args[:latency] if args.key?(:latency)
@line = args[:line] if args.key?(:line)
@mega_cycles = args[:mega_cycles] if args.key?(:mega_cycles)
@method_prop = args[:method_prop] if args.key?(:method_prop)
@module_id = args[:module_id] if args.key?(:module_id)
@nickname = args[:nickname] if args.key?(:nickname)
@pending_time = args[:pending_time] if args.key?(:pending_time)
@referrer = args[:referrer] if args.key?(:referrer)
@request_id = args[:request_id] if args.key?(:request_id)
@resource = args[:resource] if args.key?(:resource)
@response_size = args[:response_size] if args.key?(:response_size)
@source_reference = args[:source_reference] if args.key?(:source_reference)
@start_time = args[:start_time] if args.key?(:start_time)
@status = args[:status] if args.key?(:status)
@task_name = args[:task_name] if args.key?(:task_name)
@task_queue_name = args[:task_queue_name] if args.key?(:task_queue_name)
@trace_id = args[:trace_id] if args.key?(:trace_id)
@url_map_entry = args[:url_map_entry] if args.key?(:url_map_entry)
@user_agent = args[:user_agent] if args.key?(:user_agent)
@version_id = args[:version_id] if args.key?(:version_id)
@was_loading_request = args[:was_loading_request] if args.key?(:was_loading_request)
end
end
# Specifies a location in a source code file.
class SourceLocation
include Google::Apis::Core::Hashable
# Source file name. Depending on the runtime environment, this might be a simple
# name or a fully-qualified name.
# Corresponds to the JSON property `file`
# @return [String]
attr_accessor :file
# Human-readable name of the function or method being invoked, with optional
# context such as the class or package name. This information is used in
# contexts such as the logs viewer, where a file and line number are less
# meaningful. The format can vary by language. For example: qual.if.ied.Class.
# method (Java), dir/package.func (Go), function (Python).
# Corresponds to the JSON property `functionName`
# @return [String]
attr_accessor :function_name
# Line within the source file.
# Corresponds to the JSON property `line`
# @return [Fixnum]
attr_accessor :line
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@file = args[:file] if args.key?(:file)
@function_name = args[:function_name] if args.key?(:function_name)
@line = args[:line] if args.key?(:line)
end
end
# A reference to a particular snapshot of the source tree used to build and
# deploy an application.
class SourceReference
include Google::Apis::Core::Hashable
# Optional. A URI string identifying the repository. Example: "https://github.
# com/GoogleCloudPlatform/kubernetes.git"
# Corresponds to the JSON property `repository`
# @return [String]
attr_accessor :repository
# The canonical and persistent identifier of the deployed revision. Example (git)
# : "0035781c50ec7aa23385dc841529ce8a4b70db1b"
# Corresponds to the JSON property `revisionId`
# @return [String]
attr_accessor :revision_id
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@repository = args[:repository] if args.key?(:repository)
@revision_id = args[:revision_id] if args.key?(:revision_id)
end
end
# The parameters to WriteLogEntries.
class WriteLogEntriesRequest
include Google::Apis::Core::Hashable
# Required. The log entries to send to Stackdriver Logging. The order of log
# entries in this list does not matter. Values supplied in this method's
# log_name, resource, and labels fields are copied into those log entries in
# this list that do not include values for their corresponding fields. For more
# information, see the LogEntry type.If the timestamp or insert_id fields are
# missing in log entries, then this method supplies the current time or a unique
# identifier, respectively. The supplied values are chosen so that, among the
# log entries that did not supply their own values, the entries earlier in the
# list will sort before the entries later in the list. See entries.list.Log
# entries with timestamps that are more than the logs retention period in the
# past or more than 24 hours in the future might be discarded. Discarding does
# not return an error.To improve throughput and to avoid exceeding the quota
# limit for calls to entries.write, you should try to include several log
# entries in this list, rather than calling this method for each individual log
# entry.
# Corresponds to the JSON property `entries`
# @return [Array<Google::Apis::LoggingV2beta1::LogEntry>]
attr_accessor :entries
# Optional. Default labels that are added to the labels field of all log entries
# in entries. If a log entry already has a label with the same key as a label in
# this parameter, then the log entry's label is not changed. See LogEntry.
# Corresponds to the JSON property `labels`
# @return [Hash<String,String>]
attr_accessor :labels
# Optional. A default log resource name that is assigned to all log entries in
# entries that do not specify a value for log_name:
# "projects/[PROJECT_ID]/logs/[LOG_ID]"
# "organizations/[ORGANIZATION_ID]/logs/[LOG_ID]"
# "billingAccounts/[BILLING_ACCOUNT_ID]/logs/[LOG_ID]"
# "folders/[FOLDER_ID]/logs/[LOG_ID]"
# [LOG_ID] must be URL-encoded. For example, "projects/my-project-id/logs/syslog"
# or "organizations/1234567890/logs/cloudresourcemanager.googleapis.com%
# 2Factivity". For more information about log names, see LogEntry.
# Corresponds to the JSON property `logName`
# @return [String]
attr_accessor :log_name
# Optional. Whether valid entries should be written even if some other entries
# fail due to INVALID_ARGUMENT or PERMISSION_DENIED errors. If any entry is not
# written, then the response status is the error associated with one of the
# failed entries and the response includes error details keyed by the entries'
# zero-based index in the entries.write method.
# Corresponds to the JSON property `partialSuccess`
# @return [Boolean]
attr_accessor :partial_success
alias_method :partial_success?, :partial_success
# An object representing a resource that can be used for monitoring, logging,
# billing, or other purposes. Examples include virtual machine instances,
# databases, and storage devices such as disks. The type field identifies a
# MonitoredResourceDescriptor object that describes the resource's schema.
# Information in the labels field identifies the actual resource and its
# attributes according to the schema. For example, a particular Compute Engine
# VM instance could be represented by the following object, because the
# MonitoredResourceDescriptor for "gce_instance" has labels "instance_id" and "
# zone":
# ` "type": "gce_instance",
# "labels": ` "instance_id": "12345678901234",
# "zone": "us-central1-a" ``
# Corresponds to the JSON property `resource`
# @return [Google::Apis::LoggingV2beta1::MonitoredResource]
attr_accessor :resource
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@entries = args[:entries] if args.key?(:entries)
@labels = args[:labels] if args.key?(:labels)
@log_name = args[:log_name] if args.key?(:log_name)
@partial_success = args[:partial_success] if args.key?(:partial_success)
@resource = args[:resource] if args.key?(:resource)
end
end
# Result returned from WriteLogEntries. empty
class WriteLogEntriesResponse
include Google::Apis::Core::Hashable
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
end
end
end
end
end