1909 lines
84 KiB
Ruby
1909 lines
84 KiB
Ruby
# Copyright 2015 Google Inc.
|
|
#
|
|
# Licensed under the Apache License, Version 2.0 (the "License");
|
|
# you may not use this file except in compliance with the License.
|
|
# You may obtain a copy of the License at
|
|
#
|
|
# http://www.apache.org/licenses/LICENSE-2.0
|
|
#
|
|
# Unless required by applicable law or agreed to in writing, software
|
|
# distributed under the License is distributed on an "AS IS" BASIS,
|
|
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
# See the License for the specific language governing permissions and
|
|
# limitations under the License.
|
|
|
|
require 'date'
|
|
require 'google/apis/core/base_service'
|
|
require 'google/apis/core/json_representation'
|
|
require 'google/apis/core/hashable'
|
|
require 'google/apis/errors'
|
|
|
|
module Google
|
|
module Apis
|
|
module MonitoringV3
|
|
|
|
# A type of authentication to perform against the specified resource or URL that
|
|
# uses username and password. Currently, only Basic authentication is supported
|
|
# in Uptime Monitoring.
|
|
class BasicAuthentication
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# The password to authenticate.
|
|
# Corresponds to the JSON property `password`
|
|
# @return [String]
|
|
attr_accessor :password
|
|
|
|
# The username to authenticate.
|
|
# Corresponds to the JSON property `username`
|
|
# @return [String]
|
|
attr_accessor :username
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@password = args[:password] if args.key?(:password)
|
|
@username = args[:username] if args.key?(:username)
|
|
end
|
|
end
|
|
|
|
# BucketOptions describes the bucket boundaries used to create a histogram for
|
|
# the distribution. The buckets can be in a linear sequence, an exponential
|
|
# sequence, or each bucket can be specified explicitly. BucketOptions does not
|
|
# include the number of values in each bucket.A bucket has an inclusive lower
|
|
# bound and exclusive upper bound for the values that are counted for that
|
|
# bucket. The upper bound of a bucket must be strictly greater than the lower
|
|
# bound. The sequence of N buckets for a distribution consists of an underflow
|
|
# bucket (number 0), zero or more finite buckets (number 1 through N - 2) and an
|
|
# overflow bucket (number N - 1). The buckets are contiguous: the lower bound of
|
|
# bucket i (i > 0) is the same as the upper bound of bucket i - 1. The buckets
|
|
# span the whole range of finite values: lower bound of the underflow bucket is -
|
|
# infinity and the upper bound of the overflow bucket is +infinity. The finite
|
|
# buckets are so-called because both bounds are finite.
|
|
class BucketOptions
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# Specifies a set of buckets with arbitrary widths.There are size(bounds) + 1 (=
|
|
# N) buckets. Bucket i has the following boundaries:Upper bound (0 <= i < N-1):
|
|
# boundsi Lower bound (1 <= i < N); boundsi - 1The bounds field must contain at
|
|
# least one element. If bounds has only one element, then there are no finite
|
|
# buckets, and that single element is the common boundary of the overflow and
|
|
# underflow buckets.
|
|
# Corresponds to the JSON property `explicitBuckets`
|
|
# @return [Google::Apis::MonitoringV3::Explicit]
|
|
attr_accessor :explicit_buckets
|
|
|
|
# Specifies an exponential sequence of buckets that have a width that is
|
|
# proportional to the value of the lower bound. Each bucket represents a
|
|
# constant relative uncertainty on a specific value in the bucket.There are
|
|
# num_finite_buckets + 2 (= N) buckets. Bucket i has the following boundaries:
|
|
# Upper bound (0 <= i < N-1): scale * (growth_factor ^ i). Lower bound (1 <= i <
|
|
# N): scale * (growth_factor ^ (i - 1)).
|
|
# Corresponds to the JSON property `exponentialBuckets`
|
|
# @return [Google::Apis::MonitoringV3::Exponential]
|
|
attr_accessor :exponential_buckets
|
|
|
|
# Specifies a linear sequence of buckets that all have the same width (except
|
|
# overflow and underflow). Each bucket represents a constant absolute
|
|
# uncertainty on the specific value in the bucket.There are num_finite_buckets +
|
|
# 2 (= N) buckets. Bucket i has the following boundaries:Upper bound (0 <= i < N-
|
|
# 1): offset + (width * i). Lower bound (1 <= i < N): offset + (width * (i - 1))
|
|
# .
|
|
# Corresponds to the JSON property `linearBuckets`
|
|
# @return [Google::Apis::MonitoringV3::Linear]
|
|
attr_accessor :linear_buckets
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@explicit_buckets = args[:explicit_buckets] if args.key?(:explicit_buckets)
|
|
@exponential_buckets = args[:exponential_buckets] if args.key?(:exponential_buckets)
|
|
@linear_buckets = args[:linear_buckets] if args.key?(:linear_buckets)
|
|
end
|
|
end
|
|
|
|
# A collection of data points sent from a collectd-based plugin. See the
|
|
# collectd documentation for more information.
|
|
class CollectdPayload
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# The end time of the interval.
|
|
# Corresponds to the JSON property `endTime`
|
|
# @return [String]
|
|
attr_accessor :end_time
|
|
|
|
# The measurement metadata. Example: "process_id" -> 12345
|
|
# Corresponds to the JSON property `metadata`
|
|
# @return [Hash<String,Google::Apis::MonitoringV3::TypedValue>]
|
|
attr_accessor :metadata
|
|
|
|
# The name of the plugin. Example: "disk".
|
|
# Corresponds to the JSON property `plugin`
|
|
# @return [String]
|
|
attr_accessor :plugin
|
|
|
|
# The instance name of the plugin Example: "hdcl".
|
|
# Corresponds to the JSON property `pluginInstance`
|
|
# @return [String]
|
|
attr_accessor :plugin_instance
|
|
|
|
# The start time of the interval.
|
|
# Corresponds to the JSON property `startTime`
|
|
# @return [String]
|
|
attr_accessor :start_time
|
|
|
|
# The measurement type. Example: "memory".
|
|
# Corresponds to the JSON property `type`
|
|
# @return [String]
|
|
attr_accessor :type
|
|
|
|
# The measurement type instance. Example: "used".
|
|
# Corresponds to the JSON property `typeInstance`
|
|
# @return [String]
|
|
attr_accessor :type_instance
|
|
|
|
# The measured values during this time interval. Each value must have a
|
|
# different dataSourceName.
|
|
# Corresponds to the JSON property `values`
|
|
# @return [Array<Google::Apis::MonitoringV3::CollectdValue>]
|
|
attr_accessor :values
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@end_time = args[:end_time] if args.key?(:end_time)
|
|
@metadata = args[:metadata] if args.key?(:metadata)
|
|
@plugin = args[:plugin] if args.key?(:plugin)
|
|
@plugin_instance = args[:plugin_instance] if args.key?(:plugin_instance)
|
|
@start_time = args[:start_time] if args.key?(:start_time)
|
|
@type = args[:type] if args.key?(:type)
|
|
@type_instance = args[:type_instance] if args.key?(:type_instance)
|
|
@values = args[:values] if args.key?(:values)
|
|
end
|
|
end
|
|
|
|
# Describes the error status for payloads that were not written.
|
|
class CollectdPayloadError
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# The Status type defines a logical error model that is suitable for different
|
|
# programming environments, including REST APIs and RPC APIs. It is used by gRPC
|
|
# (https://github.com/grpc). The error model is designed to be:
|
|
# Simple to use and understand for most users
|
|
# Flexible enough to meet unexpected needsOverviewThe Status message contains
|
|
# three pieces of data: error code, error message, and error details. The error
|
|
# code should be an enum value of google.rpc.Code, but it may accept additional
|
|
# error codes if needed. The error message should be a developer-facing English
|
|
# message that helps developers understand and resolve the error. If a localized
|
|
# user-facing error message is needed, put the localized message in the error
|
|
# details or localize it in the client. The optional error details may contain
|
|
# arbitrary information about the error. There is a predefined set of error
|
|
# detail types in the package google.rpc that can be used for common error
|
|
# conditions.Language mappingThe Status message is the logical representation of
|
|
# the error model, but it is not necessarily the actual wire format. When the
|
|
# Status message is exposed in different client libraries and different wire
|
|
# protocols, it can be mapped differently. For example, it will likely be mapped
|
|
# to some exceptions in Java, but more likely mapped to some error codes in C.
|
|
# Other usesThe error model and the Status message can be used in a variety of
|
|
# environments, either with or without APIs, to provide a consistent developer
|
|
# experience across different environments.Example uses of this error model
|
|
# include:
|
|
# Partial errors. If a service needs to return partial errors to the client, it
|
|
# may embed the Status in the normal response to indicate the partial errors.
|
|
# Workflow errors. A typical workflow has multiple steps. Each step may have a
|
|
# Status message for error reporting.
|
|
# Batch operations. If a client uses batch request and batch response, the
|
|
# Status message should be used directly inside batch response, one for each
|
|
# error sub-response.
|
|
# Asynchronous operations. If an API call embeds asynchronous operation results
|
|
# in its response, the status of those operations should be represented directly
|
|
# using the Status message.
|
|
# Logging. If some API errors are stored in logs, the message Status could be
|
|
# used directly after any stripping needed for security/privacy reasons.
|
|
# Corresponds to the JSON property `error`
|
|
# @return [Google::Apis::MonitoringV3::Status]
|
|
attr_accessor :error
|
|
|
|
# The zero-based index in CreateCollectdTimeSeriesRequest.collectd_payloads.
|
|
# Corresponds to the JSON property `index`
|
|
# @return [Fixnum]
|
|
attr_accessor :index
|
|
|
|
# Records the error status for values that were not written due to an error.
|
|
# Failed payloads for which nothing is written will not include partial value
|
|
# errors.
|
|
# Corresponds to the JSON property `valueErrors`
|
|
# @return [Array<Google::Apis::MonitoringV3::CollectdValueError>]
|
|
attr_accessor :value_errors
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@error = args[:error] if args.key?(:error)
|
|
@index = args[:index] if args.key?(:index)
|
|
@value_errors = args[:value_errors] if args.key?(:value_errors)
|
|
end
|
|
end
|
|
|
|
# A single data point from a collectd-based plugin.
|
|
class CollectdValue
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# The data source for the collectd value. For example there are two data sources
|
|
# for network measurements: "rx" and "tx".
|
|
# Corresponds to the JSON property `dataSourceName`
|
|
# @return [String]
|
|
attr_accessor :data_source_name
|
|
|
|
# The type of measurement.
|
|
# Corresponds to the JSON property `dataSourceType`
|
|
# @return [String]
|
|
attr_accessor :data_source_type
|
|
|
|
# A single strongly-typed value.
|
|
# Corresponds to the JSON property `value`
|
|
# @return [Google::Apis::MonitoringV3::TypedValue]
|
|
attr_accessor :value
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@data_source_name = args[:data_source_name] if args.key?(:data_source_name)
|
|
@data_source_type = args[:data_source_type] if args.key?(:data_source_type)
|
|
@value = args[:value] if args.key?(:value)
|
|
end
|
|
end
|
|
|
|
# Describes the error status for values that were not written.
|
|
class CollectdValueError
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# The Status type defines a logical error model that is suitable for different
|
|
# programming environments, including REST APIs and RPC APIs. It is used by gRPC
|
|
# (https://github.com/grpc). The error model is designed to be:
|
|
# Simple to use and understand for most users
|
|
# Flexible enough to meet unexpected needsOverviewThe Status message contains
|
|
# three pieces of data: error code, error message, and error details. The error
|
|
# code should be an enum value of google.rpc.Code, but it may accept additional
|
|
# error codes if needed. The error message should be a developer-facing English
|
|
# message that helps developers understand and resolve the error. If a localized
|
|
# user-facing error message is needed, put the localized message in the error
|
|
# details or localize it in the client. The optional error details may contain
|
|
# arbitrary information about the error. There is a predefined set of error
|
|
# detail types in the package google.rpc that can be used for common error
|
|
# conditions.Language mappingThe Status message is the logical representation of
|
|
# the error model, but it is not necessarily the actual wire format. When the
|
|
# Status message is exposed in different client libraries and different wire
|
|
# protocols, it can be mapped differently. For example, it will likely be mapped
|
|
# to some exceptions in Java, but more likely mapped to some error codes in C.
|
|
# Other usesThe error model and the Status message can be used in a variety of
|
|
# environments, either with or without APIs, to provide a consistent developer
|
|
# experience across different environments.Example uses of this error model
|
|
# include:
|
|
# Partial errors. If a service needs to return partial errors to the client, it
|
|
# may embed the Status in the normal response to indicate the partial errors.
|
|
# Workflow errors. A typical workflow has multiple steps. Each step may have a
|
|
# Status message for error reporting.
|
|
# Batch operations. If a client uses batch request and batch response, the
|
|
# Status message should be used directly inside batch response, one for each
|
|
# error sub-response.
|
|
# Asynchronous operations. If an API call embeds asynchronous operation results
|
|
# in its response, the status of those operations should be represented directly
|
|
# using the Status message.
|
|
# Logging. If some API errors are stored in logs, the message Status could be
|
|
# used directly after any stripping needed for security/privacy reasons.
|
|
# Corresponds to the JSON property `error`
|
|
# @return [Google::Apis::MonitoringV3::Status]
|
|
attr_accessor :error
|
|
|
|
# The zero-based index in CollectdPayload.values within the parent
|
|
# CreateCollectdTimeSeriesRequest.collectd_payloads.
|
|
# Corresponds to the JSON property `index`
|
|
# @return [Fixnum]
|
|
attr_accessor :index
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@error = args[:error] if args.key?(:error)
|
|
@index = args[:index] if args.key?(:index)
|
|
end
|
|
end
|
|
|
|
# Used to perform string matching. Currently, this matches on the exact content.
|
|
# In the future, it can be expanded to allow for regular expressions and more
|
|
# complex matching.
|
|
class ContentMatcher
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# String content to match
|
|
# Corresponds to the JSON property `content`
|
|
# @return [String]
|
|
attr_accessor :content
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@content = args[:content] if args.key?(:content)
|
|
end
|
|
end
|
|
|
|
# The CreateCollectdTimeSeries request.
|
|
class CreateCollectdTimeSeriesRequest
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# The collectd payloads representing the time series data. You must not include
|
|
# more than a single point for each time series, so no two payloads can have the
|
|
# same values for all of the fields plugin, plugin_instance, type, and
|
|
# type_instance.
|
|
# Corresponds to the JSON property `collectdPayloads`
|
|
# @return [Array<Google::Apis::MonitoringV3::CollectdPayload>]
|
|
attr_accessor :collectd_payloads
|
|
|
|
# The version of collectd that collected the data. Example: "5.3.0-192.el6".
|
|
# Corresponds to the JSON property `collectdVersion`
|
|
# @return [String]
|
|
attr_accessor :collectd_version
|
|
|
|
# An object representing a resource that can be used for monitoring, logging,
|
|
# billing, or other purposes. Examples include virtual machine instances,
|
|
# databases, and storage devices such as disks. The type field identifies a
|
|
# MonitoredResourceDescriptor object that describes the resource's schema.
|
|
# Information in the labels field identifies the actual resource and its
|
|
# attributes according to the schema. For example, a particular Compute Engine
|
|
# VM instance could be represented by the following object, because the
|
|
# MonitoredResourceDescriptor for "gce_instance" has labels "instance_id" and "
|
|
# zone":
|
|
# ` "type": "gce_instance",
|
|
# "labels": ` "instance_id": "12345678901234",
|
|
# "zone": "us-central1-a" ``
|
|
# Corresponds to the JSON property `resource`
|
|
# @return [Google::Apis::MonitoringV3::MonitoredResource]
|
|
attr_accessor :resource
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@collectd_payloads = args[:collectd_payloads] if args.key?(:collectd_payloads)
|
|
@collectd_version = args[:collectd_version] if args.key?(:collectd_version)
|
|
@resource = args[:resource] if args.key?(:resource)
|
|
end
|
|
end
|
|
|
|
# The CreateCollectdTimeSeries response.
|
|
class CreateCollectdTimeSeriesResponse
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# Records the error status for points that were not written due to an error.
|
|
# Failed requests for which nothing is written will return an error response
|
|
# instead.
|
|
# Corresponds to the JSON property `payloadErrors`
|
|
# @return [Array<Google::Apis::MonitoringV3::CollectdPayloadError>]
|
|
attr_accessor :payload_errors
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@payload_errors = args[:payload_errors] if args.key?(:payload_errors)
|
|
end
|
|
end
|
|
|
|
# The CreateTimeSeries request.
|
|
class CreateTimeSeriesRequest
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# The new data to be added to a list of time series. Adds at most one data point
|
|
# to each of several time series. The new data point must be more recent than
|
|
# any other point in its time series. Each TimeSeries value must fully specify a
|
|
# unique time series by supplying all label values for the metric and the
|
|
# monitored resource.
|
|
# Corresponds to the JSON property `timeSeries`
|
|
# @return [Array<Google::Apis::MonitoringV3::TimeSeries>]
|
|
attr_accessor :time_series
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@time_series = args[:time_series] if args.key?(:time_series)
|
|
end
|
|
end
|
|
|
|
# Distribution contains summary statistics for a population of values. It
|
|
# optionally contains a histogram representing the distribution of those values
|
|
# across a set of buckets.The summary statistics are the count, mean, sum of the
|
|
# squared deviation from the mean, the minimum, and the maximum of the set of
|
|
# population of values. The histogram is based on a sequence of buckets and
|
|
# gives a count of values that fall into each bucket. The boundaries of the
|
|
# buckets are given either explicitly or by formulas for buckets of fixed or
|
|
# exponentially increasing widths.Although it is not forbidden, it is generally
|
|
# a bad idea to include non-finite values (infinities or NaNs) in the population
|
|
# of values, as this will render the mean and sum_of_squared_deviation fields
|
|
# meaningless.
|
|
class Distribution
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# Required in the Stackdriver Monitoring API v3. The values for each bucket
|
|
# specified in bucket_options. The sum of the values in bucketCounts must equal
|
|
# the value in the count field of the Distribution object. The order of the
|
|
# bucket counts follows the numbering schemes described for the three bucket
|
|
# types. The underflow bucket has number 0; the finite buckets, if any, have
|
|
# numbers 1 through N-2; and the overflow bucket has number N-1. The size of
|
|
# bucket_counts must not be greater than N. If the size is less than N, then the
|
|
# remaining buckets are assigned values of zero.
|
|
# Corresponds to the JSON property `bucketCounts`
|
|
# @return [Array<Fixnum>]
|
|
attr_accessor :bucket_counts
|
|
|
|
# BucketOptions describes the bucket boundaries used to create a histogram for
|
|
# the distribution. The buckets can be in a linear sequence, an exponential
|
|
# sequence, or each bucket can be specified explicitly. BucketOptions does not
|
|
# include the number of values in each bucket.A bucket has an inclusive lower
|
|
# bound and exclusive upper bound for the values that are counted for that
|
|
# bucket. The upper bound of a bucket must be strictly greater than the lower
|
|
# bound. The sequence of N buckets for a distribution consists of an underflow
|
|
# bucket (number 0), zero or more finite buckets (number 1 through N - 2) and an
|
|
# overflow bucket (number N - 1). The buckets are contiguous: the lower bound of
|
|
# bucket i (i > 0) is the same as the upper bound of bucket i - 1. The buckets
|
|
# span the whole range of finite values: lower bound of the underflow bucket is -
|
|
# infinity and the upper bound of the overflow bucket is +infinity. The finite
|
|
# buckets are so-called because both bounds are finite.
|
|
# Corresponds to the JSON property `bucketOptions`
|
|
# @return [Google::Apis::MonitoringV3::BucketOptions]
|
|
attr_accessor :bucket_options
|
|
|
|
# The number of values in the population. Must be non-negative. This value must
|
|
# equal the sum of the values in bucket_counts if a histogram is provided.
|
|
# Corresponds to the JSON property `count`
|
|
# @return [Fixnum]
|
|
attr_accessor :count
|
|
|
|
# The arithmetic mean of the values in the population. If count is zero then
|
|
# this field must be zero.
|
|
# Corresponds to the JSON property `mean`
|
|
# @return [Float]
|
|
attr_accessor :mean
|
|
|
|
# The range of the population values.
|
|
# Corresponds to the JSON property `range`
|
|
# @return [Google::Apis::MonitoringV3::Range]
|
|
attr_accessor :range
|
|
|
|
# The sum of squared deviations from the mean of the values in the population.
|
|
# For values x_i this is:
|
|
# Sum[i=1..n]((x_i - mean)^2)
|
|
# Knuth, "The Art of Computer Programming", Vol. 2, page 323, 3rd edition
|
|
# describes Welford's method for accumulating this sum in one pass.If count is
|
|
# zero then this field must be zero.
|
|
# Corresponds to the JSON property `sumOfSquaredDeviation`
|
|
# @return [Float]
|
|
attr_accessor :sum_of_squared_deviation
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@bucket_counts = args[:bucket_counts] if args.key?(:bucket_counts)
|
|
@bucket_options = args[:bucket_options] if args.key?(:bucket_options)
|
|
@count = args[:count] if args.key?(:count)
|
|
@mean = args[:mean] if args.key?(:mean)
|
|
@range = args[:range] if args.key?(:range)
|
|
@sum_of_squared_deviation = args[:sum_of_squared_deviation] if args.key?(:sum_of_squared_deviation)
|
|
end
|
|
end
|
|
|
|
# A generic empty message that you can re-use to avoid defining duplicated empty
|
|
# messages in your APIs. A typical example is to use it as the request or the
|
|
# response type of an API method. For instance:
|
|
# service Foo `
|
|
# rpc Bar(google.protobuf.Empty) returns (google.protobuf.Empty);
|
|
# `
|
|
# The JSON representation for Empty is empty JSON object ``.
|
|
class Empty
|
|
include Google::Apis::Core::Hashable
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
end
|
|
end
|
|
|
|
# Specifies a set of buckets with arbitrary widths.There are size(bounds) + 1 (=
|
|
# N) buckets. Bucket i has the following boundaries:Upper bound (0 <= i < N-1):
|
|
# boundsi Lower bound (1 <= i < N); boundsi - 1The bounds field must contain at
|
|
# least one element. If bounds has only one element, then there are no finite
|
|
# buckets, and that single element is the common boundary of the overflow and
|
|
# underflow buckets.
|
|
class Explicit
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# The values must be monotonically increasing.
|
|
# Corresponds to the JSON property `bounds`
|
|
# @return [Array<Float>]
|
|
attr_accessor :bounds
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@bounds = args[:bounds] if args.key?(:bounds)
|
|
end
|
|
end
|
|
|
|
# Specifies an exponential sequence of buckets that have a width that is
|
|
# proportional to the value of the lower bound. Each bucket represents a
|
|
# constant relative uncertainty on a specific value in the bucket.There are
|
|
# num_finite_buckets + 2 (= N) buckets. Bucket i has the following boundaries:
|
|
# Upper bound (0 <= i < N-1): scale * (growth_factor ^ i). Lower bound (1 <= i <
|
|
# N): scale * (growth_factor ^ (i - 1)).
|
|
class Exponential
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# Must be greater than 1.
|
|
# Corresponds to the JSON property `growthFactor`
|
|
# @return [Float]
|
|
attr_accessor :growth_factor
|
|
|
|
# Must be greater than 0.
|
|
# Corresponds to the JSON property `numFiniteBuckets`
|
|
# @return [Fixnum]
|
|
attr_accessor :num_finite_buckets
|
|
|
|
# Must be greater than 0.
|
|
# Corresponds to the JSON property `scale`
|
|
# @return [Float]
|
|
attr_accessor :scale
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@growth_factor = args[:growth_factor] if args.key?(:growth_factor)
|
|
@num_finite_buckets = args[:num_finite_buckets] if args.key?(:num_finite_buckets)
|
|
@scale = args[:scale] if args.key?(:scale)
|
|
end
|
|
end
|
|
|
|
# A single field of a message type.
|
|
class Field
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# The field cardinality.
|
|
# Corresponds to the JSON property `cardinality`
|
|
# @return [String]
|
|
attr_accessor :cardinality
|
|
|
|
# The string value of the default value of this field. Proto2 syntax only.
|
|
# Corresponds to the JSON property `defaultValue`
|
|
# @return [String]
|
|
attr_accessor :default_value
|
|
|
|
# The field JSON name.
|
|
# Corresponds to the JSON property `jsonName`
|
|
# @return [String]
|
|
attr_accessor :json_name
|
|
|
|
# The field type.
|
|
# Corresponds to the JSON property `kind`
|
|
# @return [String]
|
|
attr_accessor :kind
|
|
|
|
# The field name.
|
|
# Corresponds to the JSON property `name`
|
|
# @return [String]
|
|
attr_accessor :name
|
|
|
|
# The field number.
|
|
# Corresponds to the JSON property `number`
|
|
# @return [Fixnum]
|
|
attr_accessor :number
|
|
|
|
# The index of the field type in Type.oneofs, for message or enumeration types.
|
|
# The first type has index 1; zero means the type is not in the list.
|
|
# Corresponds to the JSON property `oneofIndex`
|
|
# @return [Fixnum]
|
|
attr_accessor :oneof_index
|
|
|
|
# The protocol buffer options.
|
|
# Corresponds to the JSON property `options`
|
|
# @return [Array<Google::Apis::MonitoringV3::Option>]
|
|
attr_accessor :options
|
|
|
|
# Whether to use alternative packed wire representation.
|
|
# Corresponds to the JSON property `packed`
|
|
# @return [Boolean]
|
|
attr_accessor :packed
|
|
alias_method :packed?, :packed
|
|
|
|
# The field type URL, without the scheme, for message or enumeration types.
|
|
# Example: "type.googleapis.com/google.protobuf.Timestamp".
|
|
# Corresponds to the JSON property `typeUrl`
|
|
# @return [String]
|
|
attr_accessor :type_url
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@cardinality = args[:cardinality] if args.key?(:cardinality)
|
|
@default_value = args[:default_value] if args.key?(:default_value)
|
|
@json_name = args[:json_name] if args.key?(:json_name)
|
|
@kind = args[:kind] if args.key?(:kind)
|
|
@name = args[:name] if args.key?(:name)
|
|
@number = args[:number] if args.key?(:number)
|
|
@oneof_index = args[:oneof_index] if args.key?(:oneof_index)
|
|
@options = args[:options] if args.key?(:options)
|
|
@packed = args[:packed] if args.key?(:packed)
|
|
@type_url = args[:type_url] if args.key?(:type_url)
|
|
end
|
|
end
|
|
|
|
# The description of a dynamic collection of monitored resources. Each group has
|
|
# a filter that is matched against monitored resources and their associated
|
|
# metadata. If a group's filter matches an available monitored resource, then
|
|
# that resource is a member of that group. Groups can contain any number of
|
|
# monitored resources, and each monitored resource can be a member of any number
|
|
# of groups.Groups can be nested in parent-child hierarchies. The parentName
|
|
# field identifies an optional parent for each group. If a group has a parent,
|
|
# then the only monitored resources available to be matched by the group's
|
|
# filter are the resources contained in the parent group. In other words, a
|
|
# group contains the monitored resources that match its filter and the filters
|
|
# of all the group's ancestors. A group without a parent can contain any
|
|
# monitored resource.For example, consider an infrastructure running a set of
|
|
# instances with two user-defined tags: "environment" and "role". A parent group
|
|
# has a filter, environment="production". A child of that parent group has a
|
|
# filter, role="transcoder". The parent group contains all instances in the
|
|
# production environment, regardless of their roles. The child group contains
|
|
# instances that have the transcoder role and are in the production environment.
|
|
# The monitored resources contained in a group can change at any moment,
|
|
# depending on what resources exist and what filters are associated with the
|
|
# group and its ancestors.
|
|
class Group
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# A user-assigned name for this group, used only for display purposes.
|
|
# Corresponds to the JSON property `displayName`
|
|
# @return [String]
|
|
attr_accessor :display_name
|
|
|
|
# The filter used to determine which monitored resources belong to this group.
|
|
# Corresponds to the JSON property `filter`
|
|
# @return [String]
|
|
attr_accessor :filter
|
|
|
|
# If true, the members of this group are considered to be a cluster. The system
|
|
# can perform additional analysis on groups that are clusters.
|
|
# Corresponds to the JSON property `isCluster`
|
|
# @return [Boolean]
|
|
attr_accessor :is_cluster
|
|
alias_method :is_cluster?, :is_cluster
|
|
|
|
# Output only. The name of this group. The format is "projects/`
|
|
# project_id_or_number`/groups/`group_id`". When creating a group, this field is
|
|
# ignored and a new name is created consisting of the project specified in the
|
|
# call to CreateGroup and a unique `group_id` that is generated automatically.
|
|
# Corresponds to the JSON property `name`
|
|
# @return [String]
|
|
attr_accessor :name
|
|
|
|
# The name of the group's parent, if it has one. The format is "projects/`
|
|
# project_id_or_number`/groups/`group_id`". For groups with no parent,
|
|
# parentName is the empty string, "".
|
|
# Corresponds to the JSON property `parentName`
|
|
# @return [String]
|
|
attr_accessor :parent_name
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@display_name = args[:display_name] if args.key?(:display_name)
|
|
@filter = args[:filter] if args.key?(:filter)
|
|
@is_cluster = args[:is_cluster] if args.key?(:is_cluster)
|
|
@name = args[:name] if args.key?(:name)
|
|
@parent_name = args[:parent_name] if args.key?(:parent_name)
|
|
end
|
|
end
|
|
|
|
# Information involved in an HTTP/HTTPS uptime check request.
|
|
class HttpCheck
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# A type of authentication to perform against the specified resource or URL that
|
|
# uses username and password. Currently, only Basic authentication is supported
|
|
# in Uptime Monitoring.
|
|
# Corresponds to the JSON property `authInfo`
|
|
# @return [Google::Apis::MonitoringV3::BasicAuthentication]
|
|
attr_accessor :auth_info
|
|
|
|
# The list of headers to send as part of the uptime check request. If two
|
|
# headers have the same key and different values, they should be entered as a
|
|
# single header, with the value being a comma-separated list of all the desired
|
|
# values as described at https://www.w3.org/Protocols/rfc2616/rfc2616.txt (page
|
|
# 31). Entering two separate headers with the same key in a Create call will
|
|
# cause the first to be overwritten by the second.
|
|
# Corresponds to the JSON property `headers`
|
|
# @return [Hash<String,String>]
|
|
attr_accessor :headers
|
|
|
|
# Boolean specifiying whether to encrypt the header information. Encryption
|
|
# should be specified for any headers related to authentication that you do not
|
|
# wish to be seen when retrieving the configuration. The server will be
|
|
# responsible for encrypting the headers. On Get/List calls, if mask_headers is
|
|
# set to True then the headers will be obscured with ******.
|
|
# Corresponds to the JSON property `maskHeaders`
|
|
# @return [Boolean]
|
|
attr_accessor :mask_headers
|
|
alias_method :mask_headers?, :mask_headers
|
|
|
|
# The path to the page to run the check against. Will be combined with the host (
|
|
# specified within the MonitoredResource) and port to construct the full URL.
|
|
# Optional (defaults to "/").
|
|
# Corresponds to the JSON property `path`
|
|
# @return [String]
|
|
attr_accessor :path
|
|
|
|
# The port to the page to run the check against. Will be combined with host (
|
|
# specified within the MonitoredResource) and path to construct the full URL.
|
|
# Optional (defaults to 80 without SSL, or 443 with SSL).
|
|
# Corresponds to the JSON property `port`
|
|
# @return [Fixnum]
|
|
attr_accessor :port
|
|
|
|
# If true, use HTTPS instead of HTTP to run the check.
|
|
# Corresponds to the JSON property `useSsl`
|
|
# @return [Boolean]
|
|
attr_accessor :use_ssl
|
|
alias_method :use_ssl?, :use_ssl
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@auth_info = args[:auth_info] if args.key?(:auth_info)
|
|
@headers = args[:headers] if args.key?(:headers)
|
|
@mask_headers = args[:mask_headers] if args.key?(:mask_headers)
|
|
@path = args[:path] if args.key?(:path)
|
|
@port = args[:port] if args.key?(:port)
|
|
@use_ssl = args[:use_ssl] if args.key?(:use_ssl)
|
|
end
|
|
end
|
|
|
|
# Nimbus InternalCheckers.
|
|
class InternalChecker
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# The checker ID.
|
|
# Corresponds to the JSON property `checkerId`
|
|
# @return [String]
|
|
attr_accessor :checker_id
|
|
|
|
# The checker's human-readable name.
|
|
# Corresponds to the JSON property `displayName`
|
|
# @return [String]
|
|
attr_accessor :display_name
|
|
|
|
# The GCP zone the uptime check should egress from. Only respected for internal
|
|
# uptime checks, where internal_network is specified.
|
|
# Corresponds to the JSON property `gcpZone`
|
|
# @return [String]
|
|
attr_accessor :gcp_zone
|
|
|
|
# The internal network to perform this uptime check on.
|
|
# Corresponds to the JSON property `network`
|
|
# @return [String]
|
|
attr_accessor :network
|
|
|
|
# The GCP project ID. Not necessarily the same as the project_id for the config.
|
|
# Corresponds to the JSON property `projectId`
|
|
# @return [String]
|
|
attr_accessor :project_id
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@checker_id = args[:checker_id] if args.key?(:checker_id)
|
|
@display_name = args[:display_name] if args.key?(:display_name)
|
|
@gcp_zone = args[:gcp_zone] if args.key?(:gcp_zone)
|
|
@network = args[:network] if args.key?(:network)
|
|
@project_id = args[:project_id] if args.key?(:project_id)
|
|
end
|
|
end
|
|
|
|
# A description of a label.
|
|
class LabelDescriptor
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# A human-readable description for the label.
|
|
# Corresponds to the JSON property `description`
|
|
# @return [String]
|
|
attr_accessor :description
|
|
|
|
# The label key.
|
|
# Corresponds to the JSON property `key`
|
|
# @return [String]
|
|
attr_accessor :key
|
|
|
|
# The type of data that can be assigned to the label.
|
|
# Corresponds to the JSON property `valueType`
|
|
# @return [String]
|
|
attr_accessor :value_type
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@description = args[:description] if args.key?(:description)
|
|
@key = args[:key] if args.key?(:key)
|
|
@value_type = args[:value_type] if args.key?(:value_type)
|
|
end
|
|
end
|
|
|
|
# Specifies a linear sequence of buckets that all have the same width (except
|
|
# overflow and underflow). Each bucket represents a constant absolute
|
|
# uncertainty on the specific value in the bucket.There are num_finite_buckets +
|
|
# 2 (= N) buckets. Bucket i has the following boundaries:Upper bound (0 <= i < N-
|
|
# 1): offset + (width * i). Lower bound (1 <= i < N): offset + (width * (i - 1))
|
|
# .
|
|
class Linear
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# Must be greater than 0.
|
|
# Corresponds to the JSON property `numFiniteBuckets`
|
|
# @return [Fixnum]
|
|
attr_accessor :num_finite_buckets
|
|
|
|
# Lower bound of the first bucket.
|
|
# Corresponds to the JSON property `offset`
|
|
# @return [Float]
|
|
attr_accessor :offset
|
|
|
|
# Must be greater than 0.
|
|
# Corresponds to the JSON property `width`
|
|
# @return [Float]
|
|
attr_accessor :width
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@num_finite_buckets = args[:num_finite_buckets] if args.key?(:num_finite_buckets)
|
|
@offset = args[:offset] if args.key?(:offset)
|
|
@width = args[:width] if args.key?(:width)
|
|
end
|
|
end
|
|
|
|
# The ListGroupMembers response.
|
|
class ListGroupMembersResponse
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# A set of monitored resources in the group.
|
|
# Corresponds to the JSON property `members`
|
|
# @return [Array<Google::Apis::MonitoringV3::MonitoredResource>]
|
|
attr_accessor :members
|
|
|
|
# If there are more results than have been returned, then this field is set to a
|
|
# non-empty value. To see the additional results, use that value as pageToken in
|
|
# the next call to this method.
|
|
# Corresponds to the JSON property `nextPageToken`
|
|
# @return [String]
|
|
attr_accessor :next_page_token
|
|
|
|
# The total number of elements matching this request.
|
|
# Corresponds to the JSON property `totalSize`
|
|
# @return [Fixnum]
|
|
attr_accessor :total_size
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@members = args[:members] if args.key?(:members)
|
|
@next_page_token = args[:next_page_token] if args.key?(:next_page_token)
|
|
@total_size = args[:total_size] if args.key?(:total_size)
|
|
end
|
|
end
|
|
|
|
# The ListGroups response.
|
|
class ListGroupsResponse
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# The groups that match the specified filters.
|
|
# Corresponds to the JSON property `group`
|
|
# @return [Array<Google::Apis::MonitoringV3::Group>]
|
|
attr_accessor :group
|
|
|
|
# If there are more results than have been returned, then this field is set to a
|
|
# non-empty value. To see the additional results, use that value as pageToken in
|
|
# the next call to this method.
|
|
# Corresponds to the JSON property `nextPageToken`
|
|
# @return [String]
|
|
attr_accessor :next_page_token
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@group = args[:group] if args.key?(:group)
|
|
@next_page_token = args[:next_page_token] if args.key?(:next_page_token)
|
|
end
|
|
end
|
|
|
|
# The ListMetricDescriptors response.
|
|
class ListMetricDescriptorsResponse
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# The metric descriptors that are available to the project and that match the
|
|
# value of filter, if present.
|
|
# Corresponds to the JSON property `metricDescriptors`
|
|
# @return [Array<Google::Apis::MonitoringV3::MetricDescriptor>]
|
|
attr_accessor :metric_descriptors
|
|
|
|
# If there are more results than have been returned, then this field is set to a
|
|
# non-empty value. To see the additional results, use that value as pageToken in
|
|
# the next call to this method.
|
|
# Corresponds to the JSON property `nextPageToken`
|
|
# @return [String]
|
|
attr_accessor :next_page_token
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@metric_descriptors = args[:metric_descriptors] if args.key?(:metric_descriptors)
|
|
@next_page_token = args[:next_page_token] if args.key?(:next_page_token)
|
|
end
|
|
end
|
|
|
|
# The ListMonitoredResourceDescriptors response.
|
|
class ListMonitoredResourceDescriptorsResponse
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# If there are more results than have been returned, then this field is set to a
|
|
# non-empty value. To see the additional results, use that value as pageToken in
|
|
# the next call to this method.
|
|
# Corresponds to the JSON property `nextPageToken`
|
|
# @return [String]
|
|
attr_accessor :next_page_token
|
|
|
|
# The monitored resource descriptors that are available to this project and that
|
|
# match filter, if present.
|
|
# Corresponds to the JSON property `resourceDescriptors`
|
|
# @return [Array<Google::Apis::MonitoringV3::MonitoredResourceDescriptor>]
|
|
attr_accessor :resource_descriptors
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@next_page_token = args[:next_page_token] if args.key?(:next_page_token)
|
|
@resource_descriptors = args[:resource_descriptors] if args.key?(:resource_descriptors)
|
|
end
|
|
end
|
|
|
|
# The ListTimeSeries response.
|
|
class ListTimeSeriesResponse
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# If there are more results than have been returned, then this field is set to a
|
|
# non-empty value. To see the additional results, use that value as pageToken in
|
|
# the next call to this method.
|
|
# Corresponds to the JSON property `nextPageToken`
|
|
# @return [String]
|
|
attr_accessor :next_page_token
|
|
|
|
# One or more time series that match the filter included in the request.
|
|
# Corresponds to the JSON property `timeSeries`
|
|
# @return [Array<Google::Apis::MonitoringV3::TimeSeries>]
|
|
attr_accessor :time_series
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@next_page_token = args[:next_page_token] if args.key?(:next_page_token)
|
|
@time_series = args[:time_series] if args.key?(:time_series)
|
|
end
|
|
end
|
|
|
|
# The protocol for the ListUptimeCheckConfigs response.
|
|
class ListUptimeCheckConfigsResponse
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# This field represents the pagination token to retrieve the next page of
|
|
# results. If the value is empty, it means no further results for the request.
|
|
# To retrieve the next page of results, the value of the next_page_token is
|
|
# passed to the subsequent List method call (in the request message's page_token
|
|
# field).
|
|
# Corresponds to the JSON property `nextPageToken`
|
|
# @return [String]
|
|
attr_accessor :next_page_token
|
|
|
|
# The returned uptime check configurations.
|
|
# Corresponds to the JSON property `uptimeCheckConfigs`
|
|
# @return [Array<Google::Apis::MonitoringV3::UptimeCheckConfig>]
|
|
attr_accessor :uptime_check_configs
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@next_page_token = args[:next_page_token] if args.key?(:next_page_token)
|
|
@uptime_check_configs = args[:uptime_check_configs] if args.key?(:uptime_check_configs)
|
|
end
|
|
end
|
|
|
|
# The protocol for the ListUptimeCheckIps response.
|
|
class ListUptimeCheckIpsResponse
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# This field represents the pagination token to retrieve the next page of
|
|
# results. If the value is empty, it means no further results for the request.
|
|
# To retrieve the next page of results, the value of the next_page_token is
|
|
# passed to the subsequent List method call (in the request message's page_token
|
|
# field). NOTE: this field is not yet implemented
|
|
# Corresponds to the JSON property `nextPageToken`
|
|
# @return [String]
|
|
attr_accessor :next_page_token
|
|
|
|
# The returned list of IP addresses (including region and location) that the
|
|
# checkers run from.
|
|
# Corresponds to the JSON property `uptimeCheckIps`
|
|
# @return [Array<Google::Apis::MonitoringV3::UptimeCheckIp>]
|
|
attr_accessor :uptime_check_ips
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@next_page_token = args[:next_page_token] if args.key?(:next_page_token)
|
|
@uptime_check_ips = args[:uptime_check_ips] if args.key?(:uptime_check_ips)
|
|
end
|
|
end
|
|
|
|
# A specific metric, identified by specifying values for all of the labels of a
|
|
# MetricDescriptor.
|
|
class Metric
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# The set of label values that uniquely identify this metric. All labels listed
|
|
# in the MetricDescriptor must be assigned values.
|
|
# Corresponds to the JSON property `labels`
|
|
# @return [Hash<String,String>]
|
|
attr_accessor :labels
|
|
|
|
# An existing metric type, see google.api.MetricDescriptor. For example, custom.
|
|
# googleapis.com/invoice/paid/amount.
|
|
# Corresponds to the JSON property `type`
|
|
# @return [String]
|
|
attr_accessor :type
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@labels = args[:labels] if args.key?(:labels)
|
|
@type = args[:type] if args.key?(:type)
|
|
end
|
|
end
|
|
|
|
# Defines a metric type and its schema. Once a metric descriptor is created,
|
|
# deleting or altering it stops data collection and makes the metric type's
|
|
# existing data unusable.
|
|
class MetricDescriptor
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# A detailed description of the metric, which can be used in documentation.
|
|
# Corresponds to the JSON property `description`
|
|
# @return [String]
|
|
attr_accessor :description
|
|
|
|
# A concise name for the metric, which can be displayed in user interfaces. Use
|
|
# sentence case without an ending period, for example "Request count". This
|
|
# field is optional but it is recommended to be set for any metrics associated
|
|
# with user-visible concepts, such as Quota.
|
|
# Corresponds to the JSON property `displayName`
|
|
# @return [String]
|
|
attr_accessor :display_name
|
|
|
|
# The set of labels that can be used to describe a specific instance of this
|
|
# metric type. For example, the appengine.googleapis.com/http/server/
|
|
# response_latencies metric type has a label for the HTTP response code,
|
|
# response_code, so you can look at latencies for successful responses or just
|
|
# for responses that failed.
|
|
# Corresponds to the JSON property `labels`
|
|
# @return [Array<Google::Apis::MonitoringV3::LabelDescriptor>]
|
|
attr_accessor :labels
|
|
|
|
# Whether the metric records instantaneous values, changes to a value, etc. Some
|
|
# combinations of metric_kind and value_type might not be supported.
|
|
# Corresponds to the JSON property `metricKind`
|
|
# @return [String]
|
|
attr_accessor :metric_kind
|
|
|
|
# The resource name of the metric descriptor.
|
|
# Corresponds to the JSON property `name`
|
|
# @return [String]
|
|
attr_accessor :name
|
|
|
|
# The metric type, including its DNS name prefix. The type is not URL-encoded.
|
|
# All user-defined custom metric types have the DNS name custom.googleapis.com.
|
|
# Metric types should use a natural hierarchical grouping. For example:
|
|
# "custom.googleapis.com/invoice/paid/amount"
|
|
# "appengine.googleapis.com/http/server/response_latencies"
|
|
# Corresponds to the JSON property `type`
|
|
# @return [String]
|
|
attr_accessor :type
|
|
|
|
# Optional. The unit in which the metric value is reported. For example, kBy/s
|
|
# means kilobytes/sec, and 1 is the dimensionless unit. The supported units are
|
|
# a subset of The Unified Code for Units of Measure standard (http://
|
|
# unitsofmeasure.org/ucum.html).<br><br> This field is part of the metric's
|
|
# documentation, but it is ignored by Stackdriver.
|
|
# Corresponds to the JSON property `unit`
|
|
# @return [String]
|
|
attr_accessor :unit
|
|
|
|
# Whether the measurement is an integer, a floating-point number, etc. Some
|
|
# combinations of metric_kind and value_type might not be supported.
|
|
# Corresponds to the JSON property `valueType`
|
|
# @return [String]
|
|
attr_accessor :value_type
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@description = args[:description] if args.key?(:description)
|
|
@display_name = args[:display_name] if args.key?(:display_name)
|
|
@labels = args[:labels] if args.key?(:labels)
|
|
@metric_kind = args[:metric_kind] if args.key?(:metric_kind)
|
|
@name = args[:name] if args.key?(:name)
|
|
@type = args[:type] if args.key?(:type)
|
|
@unit = args[:unit] if args.key?(:unit)
|
|
@value_type = args[:value_type] if args.key?(:value_type)
|
|
end
|
|
end
|
|
|
|
# An object representing a resource that can be used for monitoring, logging,
|
|
# billing, or other purposes. Examples include virtual machine instances,
|
|
# databases, and storage devices such as disks. The type field identifies a
|
|
# MonitoredResourceDescriptor object that describes the resource's schema.
|
|
# Information in the labels field identifies the actual resource and its
|
|
# attributes according to the schema. For example, a particular Compute Engine
|
|
# VM instance could be represented by the following object, because the
|
|
# MonitoredResourceDescriptor for "gce_instance" has labels "instance_id" and "
|
|
# zone":
|
|
# ` "type": "gce_instance",
|
|
# "labels": ` "instance_id": "12345678901234",
|
|
# "zone": "us-central1-a" ``
|
|
class MonitoredResource
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# Required. Values for all of the labels listed in the associated monitored
|
|
# resource descriptor. For example, Compute Engine VM instances use the labels "
|
|
# project_id", "instance_id", and "zone".
|
|
# Corresponds to the JSON property `labels`
|
|
# @return [Hash<String,String>]
|
|
attr_accessor :labels
|
|
|
|
# Required. The monitored resource type. This field must match the type field of
|
|
# a MonitoredResourceDescriptor object. For example, the type of a Compute
|
|
# Engine VM instance is gce_instance.
|
|
# Corresponds to the JSON property `type`
|
|
# @return [String]
|
|
attr_accessor :type
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@labels = args[:labels] if args.key?(:labels)
|
|
@type = args[:type] if args.key?(:type)
|
|
end
|
|
end
|
|
|
|
# An object that describes the schema of a MonitoredResource object using a type
|
|
# name and a set of labels. For example, the monitored resource descriptor for
|
|
# Google Compute Engine VM instances has a type of "gce_instance" and specifies
|
|
# the use of the labels "instance_id" and "zone" to identify particular VM
|
|
# instances.Different APIs can support different monitored resource types. APIs
|
|
# generally provide a list method that returns the monitored resource
|
|
# descriptors used by the API.
|
|
class MonitoredResourceDescriptor
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# Optional. A detailed description of the monitored resource type that might be
|
|
# used in documentation.
|
|
# Corresponds to the JSON property `description`
|
|
# @return [String]
|
|
attr_accessor :description
|
|
|
|
# Optional. A concise name for the monitored resource type that might be
|
|
# displayed in user interfaces. It should be a Title Cased Noun Phrase, without
|
|
# any article or other determiners. For example, "Google Cloud SQL Database".
|
|
# Corresponds to the JSON property `displayName`
|
|
# @return [String]
|
|
attr_accessor :display_name
|
|
|
|
# Required. A set of labels used to describe instances of this monitored
|
|
# resource type. For example, an individual Google Cloud SQL database is
|
|
# identified by values for the labels "database_id" and "zone".
|
|
# Corresponds to the JSON property `labels`
|
|
# @return [Array<Google::Apis::MonitoringV3::LabelDescriptor>]
|
|
attr_accessor :labels
|
|
|
|
# Optional. The resource name of the monitored resource descriptor: "projects/`
|
|
# project_id`/monitoredResourceDescriptors/`type`" where `type` is the value of
|
|
# the type field in this object and `project_id` is a project ID that provides
|
|
# API-specific context for accessing the type. APIs that do not use project
|
|
# information can use the resource name format "monitoredResourceDescriptors/`
|
|
# type`".
|
|
# Corresponds to the JSON property `name`
|
|
# @return [String]
|
|
attr_accessor :name
|
|
|
|
# Required. The monitored resource type. For example, the type "
|
|
# cloudsql_database" represents databases in Google Cloud SQL. The maximum
|
|
# length of this value is 256 characters.
|
|
# Corresponds to the JSON property `type`
|
|
# @return [String]
|
|
attr_accessor :type
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@description = args[:description] if args.key?(:description)
|
|
@display_name = args[:display_name] if args.key?(:display_name)
|
|
@labels = args[:labels] if args.key?(:labels)
|
|
@name = args[:name] if args.key?(:name)
|
|
@type = args[:type] if args.key?(:type)
|
|
end
|
|
end
|
|
|
|
# A protocol buffer option, which can be attached to a message, field,
|
|
# enumeration, etc.
|
|
class Option
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# The option's name. For protobuf built-in options (options defined in
|
|
# descriptor.proto), this is the short name. For example, "map_entry". For
|
|
# custom options, it should be the fully-qualified name. For example, "google.
|
|
# api.http".
|
|
# Corresponds to the JSON property `name`
|
|
# @return [String]
|
|
attr_accessor :name
|
|
|
|
# The option's value packed in an Any message. If the value is a primitive, the
|
|
# corresponding wrapper type defined in google/protobuf/wrappers.proto should be
|
|
# used. If the value is an enum, it should be stored as an int32 value using the
|
|
# google.protobuf.Int32Value type.
|
|
# Corresponds to the JSON property `value`
|
|
# @return [Hash<String,Object>]
|
|
attr_accessor :value
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@name = args[:name] if args.key?(:name)
|
|
@value = args[:value] if args.key?(:value)
|
|
end
|
|
end
|
|
|
|
# A single data point in a time series.
|
|
class Point
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# A time interval extending just after a start time through an end time. If the
|
|
# start time is the same as the end time, then the interval represents a single
|
|
# point in time.
|
|
# Corresponds to the JSON property `interval`
|
|
# @return [Google::Apis::MonitoringV3::TimeInterval]
|
|
attr_accessor :interval
|
|
|
|
# A single strongly-typed value.
|
|
# Corresponds to the JSON property `value`
|
|
# @return [Google::Apis::MonitoringV3::TypedValue]
|
|
attr_accessor :value
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@interval = args[:interval] if args.key?(:interval)
|
|
@value = args[:value] if args.key?(:value)
|
|
end
|
|
end
|
|
|
|
# The range of the population values.
|
|
class Range
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# The maximum of the population values.
|
|
# Corresponds to the JSON property `max`
|
|
# @return [Float]
|
|
attr_accessor :max
|
|
|
|
# The minimum of the population values.
|
|
# Corresponds to the JSON property `min`
|
|
# @return [Float]
|
|
attr_accessor :min
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@max = args[:max] if args.key?(:max)
|
|
@min = args[:min] if args.key?(:min)
|
|
end
|
|
end
|
|
|
|
# The resource submessage for group checks. It can be used instead of a
|
|
# monitored resource, when multiple resources are being monitored.
|
|
class ResourceGroup
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# The group of resources being monitored. Should be only the group_id, not
|
|
# projects/<project_id>/groups/<group_id>.
|
|
# Corresponds to the JSON property `groupId`
|
|
# @return [String]
|
|
attr_accessor :group_id
|
|
|
|
# The resource type of the group members.
|
|
# Corresponds to the JSON property `resourceType`
|
|
# @return [String]
|
|
attr_accessor :resource_type
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@group_id = args[:group_id] if args.key?(:group_id)
|
|
@resource_type = args[:resource_type] if args.key?(:resource_type)
|
|
end
|
|
end
|
|
|
|
# SourceContext represents information about the source of a protobuf element,
|
|
# like the file in which it is defined.
|
|
class SourceContext
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# The path-qualified name of the .proto file that contained the associated
|
|
# protobuf element. For example: "google/protobuf/source_context.proto".
|
|
# Corresponds to the JSON property `fileName`
|
|
# @return [String]
|
|
attr_accessor :file_name
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@file_name = args[:file_name] if args.key?(:file_name)
|
|
end
|
|
end
|
|
|
|
# The Status type defines a logical error model that is suitable for different
|
|
# programming environments, including REST APIs and RPC APIs. It is used by gRPC
|
|
# (https://github.com/grpc). The error model is designed to be:
|
|
# Simple to use and understand for most users
|
|
# Flexible enough to meet unexpected needsOverviewThe Status message contains
|
|
# three pieces of data: error code, error message, and error details. The error
|
|
# code should be an enum value of google.rpc.Code, but it may accept additional
|
|
# error codes if needed. The error message should be a developer-facing English
|
|
# message that helps developers understand and resolve the error. If a localized
|
|
# user-facing error message is needed, put the localized message in the error
|
|
# details or localize it in the client. The optional error details may contain
|
|
# arbitrary information about the error. There is a predefined set of error
|
|
# detail types in the package google.rpc that can be used for common error
|
|
# conditions.Language mappingThe Status message is the logical representation of
|
|
# the error model, but it is not necessarily the actual wire format. When the
|
|
# Status message is exposed in different client libraries and different wire
|
|
# protocols, it can be mapped differently. For example, it will likely be mapped
|
|
# to some exceptions in Java, but more likely mapped to some error codes in C.
|
|
# Other usesThe error model and the Status message can be used in a variety of
|
|
# environments, either with or without APIs, to provide a consistent developer
|
|
# experience across different environments.Example uses of this error model
|
|
# include:
|
|
# Partial errors. If a service needs to return partial errors to the client, it
|
|
# may embed the Status in the normal response to indicate the partial errors.
|
|
# Workflow errors. A typical workflow has multiple steps. Each step may have a
|
|
# Status message for error reporting.
|
|
# Batch operations. If a client uses batch request and batch response, the
|
|
# Status message should be used directly inside batch response, one for each
|
|
# error sub-response.
|
|
# Asynchronous operations. If an API call embeds asynchronous operation results
|
|
# in its response, the status of those operations should be represented directly
|
|
# using the Status message.
|
|
# Logging. If some API errors are stored in logs, the message Status could be
|
|
# used directly after any stripping needed for security/privacy reasons.
|
|
class Status
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# The status code, which should be an enum value of google.rpc.Code.
|
|
# Corresponds to the JSON property `code`
|
|
# @return [Fixnum]
|
|
attr_accessor :code
|
|
|
|
# A list of messages that carry the error details. There is a common set of
|
|
# message types for APIs to use.
|
|
# Corresponds to the JSON property `details`
|
|
# @return [Array<Hash<String,Object>>]
|
|
attr_accessor :details
|
|
|
|
# A developer-facing error message, which should be in English. Any user-facing
|
|
# error message should be localized and sent in the google.rpc.Status.details
|
|
# field, or localized by the client.
|
|
# Corresponds to the JSON property `message`
|
|
# @return [String]
|
|
attr_accessor :message
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@code = args[:code] if args.key?(:code)
|
|
@details = args[:details] if args.key?(:details)
|
|
@message = args[:message] if args.key?(:message)
|
|
end
|
|
end
|
|
|
|
# Information required for a TCP uptime check request.
|
|
class TcpCheck
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# The port to the page to run the check against. Will be combined with host (
|
|
# specified within the MonitoredResource) to construct the full URL. Required.
|
|
# Corresponds to the JSON property `port`
|
|
# @return [Fixnum]
|
|
attr_accessor :port
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@port = args[:port] if args.key?(:port)
|
|
end
|
|
end
|
|
|
|
# A time interval extending just after a start time through an end time. If the
|
|
# start time is the same as the end time, then the interval represents a single
|
|
# point in time.
|
|
class TimeInterval
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# Required. The end of the time interval.
|
|
# Corresponds to the JSON property `endTime`
|
|
# @return [String]
|
|
attr_accessor :end_time
|
|
|
|
# Optional. The beginning of the time interval. The default value for the start
|
|
# time is the end time. The start time must not be later than the end time.
|
|
# Corresponds to the JSON property `startTime`
|
|
# @return [String]
|
|
attr_accessor :start_time
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@end_time = args[:end_time] if args.key?(:end_time)
|
|
@start_time = args[:start_time] if args.key?(:start_time)
|
|
end
|
|
end
|
|
|
|
# A collection of data points that describes the time-varying values of a metric.
|
|
# A time series is identified by a combination of a fully-specified monitored
|
|
# resource and a fully-specified metric. This type is used for both listing and
|
|
# creating time series.
|
|
class TimeSeries
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# A specific metric, identified by specifying values for all of the labels of a
|
|
# MetricDescriptor.
|
|
# Corresponds to the JSON property `metric`
|
|
# @return [Google::Apis::MonitoringV3::Metric]
|
|
attr_accessor :metric
|
|
|
|
# The metric kind of the time series. When listing time series, this metric kind
|
|
# might be different from the metric kind of the associated metric if this time
|
|
# series is an alignment or reduction of other time series.When creating a time
|
|
# series, this field is optional. If present, it must be the same as the metric
|
|
# kind of the associated metric. If the associated metric's descriptor must be
|
|
# auto-created, then this field specifies the metric kind of the new descriptor
|
|
# and must be either GAUGE (the default) or CUMULATIVE.
|
|
# Corresponds to the JSON property `metricKind`
|
|
# @return [String]
|
|
attr_accessor :metric_kind
|
|
|
|
# The data points of this time series. When listing time series, the order of
|
|
# the points is specified by the list method.When creating a time series, this
|
|
# field must contain exactly one point and the point's type must be the same as
|
|
# the value type of the associated metric. If the associated metric's descriptor
|
|
# must be auto-created, then the value type of the descriptor is determined by
|
|
# the point's type, which must be BOOL, INT64, DOUBLE, or DISTRIBUTION.
|
|
# Corresponds to the JSON property `points`
|
|
# @return [Array<Google::Apis::MonitoringV3::Point>]
|
|
attr_accessor :points
|
|
|
|
# An object representing a resource that can be used for monitoring, logging,
|
|
# billing, or other purposes. Examples include virtual machine instances,
|
|
# databases, and storage devices such as disks. The type field identifies a
|
|
# MonitoredResourceDescriptor object that describes the resource's schema.
|
|
# Information in the labels field identifies the actual resource and its
|
|
# attributes according to the schema. For example, a particular Compute Engine
|
|
# VM instance could be represented by the following object, because the
|
|
# MonitoredResourceDescriptor for "gce_instance" has labels "instance_id" and "
|
|
# zone":
|
|
# ` "type": "gce_instance",
|
|
# "labels": ` "instance_id": "12345678901234",
|
|
# "zone": "us-central1-a" ``
|
|
# Corresponds to the JSON property `resource`
|
|
# @return [Google::Apis::MonitoringV3::MonitoredResource]
|
|
attr_accessor :resource
|
|
|
|
# The value type of the time series. When listing time series, this value type
|
|
# might be different from the value type of the associated metric if this time
|
|
# series is an alignment or reduction of other time series.When creating a time
|
|
# series, this field is optional. If present, it must be the same as the type of
|
|
# the data in the points field.
|
|
# Corresponds to the JSON property `valueType`
|
|
# @return [String]
|
|
attr_accessor :value_type
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@metric = args[:metric] if args.key?(:metric)
|
|
@metric_kind = args[:metric_kind] if args.key?(:metric_kind)
|
|
@points = args[:points] if args.key?(:points)
|
|
@resource = args[:resource] if args.key?(:resource)
|
|
@value_type = args[:value_type] if args.key?(:value_type)
|
|
end
|
|
end
|
|
|
|
# A protocol buffer message type.
|
|
class Type
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# The list of fields.
|
|
# Corresponds to the JSON property `fields`
|
|
# @return [Array<Google::Apis::MonitoringV3::Field>]
|
|
attr_accessor :fields
|
|
|
|
# The fully qualified message name.
|
|
# Corresponds to the JSON property `name`
|
|
# @return [String]
|
|
attr_accessor :name
|
|
|
|
# The list of types appearing in oneof definitions in this type.
|
|
# Corresponds to the JSON property `oneofs`
|
|
# @return [Array<String>]
|
|
attr_accessor :oneofs
|
|
|
|
# The protocol buffer options.
|
|
# Corresponds to the JSON property `options`
|
|
# @return [Array<Google::Apis::MonitoringV3::Option>]
|
|
attr_accessor :options
|
|
|
|
# SourceContext represents information about the source of a protobuf element,
|
|
# like the file in which it is defined.
|
|
# Corresponds to the JSON property `sourceContext`
|
|
# @return [Google::Apis::MonitoringV3::SourceContext]
|
|
attr_accessor :source_context
|
|
|
|
# The source syntax.
|
|
# Corresponds to the JSON property `syntax`
|
|
# @return [String]
|
|
attr_accessor :syntax
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@fields = args[:fields] if args.key?(:fields)
|
|
@name = args[:name] if args.key?(:name)
|
|
@oneofs = args[:oneofs] if args.key?(:oneofs)
|
|
@options = args[:options] if args.key?(:options)
|
|
@source_context = args[:source_context] if args.key?(:source_context)
|
|
@syntax = args[:syntax] if args.key?(:syntax)
|
|
end
|
|
end
|
|
|
|
# A single strongly-typed value.
|
|
class TypedValue
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# A Boolean value: true or false.
|
|
# Corresponds to the JSON property `boolValue`
|
|
# @return [Boolean]
|
|
attr_accessor :bool_value
|
|
alias_method :bool_value?, :bool_value
|
|
|
|
# Distribution contains summary statistics for a population of values. It
|
|
# optionally contains a histogram representing the distribution of those values
|
|
# across a set of buckets.The summary statistics are the count, mean, sum of the
|
|
# squared deviation from the mean, the minimum, and the maximum of the set of
|
|
# population of values. The histogram is based on a sequence of buckets and
|
|
# gives a count of values that fall into each bucket. The boundaries of the
|
|
# buckets are given either explicitly or by formulas for buckets of fixed or
|
|
# exponentially increasing widths.Although it is not forbidden, it is generally
|
|
# a bad idea to include non-finite values (infinities or NaNs) in the population
|
|
# of values, as this will render the mean and sum_of_squared_deviation fields
|
|
# meaningless.
|
|
# Corresponds to the JSON property `distributionValue`
|
|
# @return [Google::Apis::MonitoringV3::Distribution]
|
|
attr_accessor :distribution_value
|
|
|
|
# A 64-bit double-precision floating-point number. Its magnitude is
|
|
# approximately ±10<sup>±300</sup> and it has 16 significant
|
|
# digits of precision.
|
|
# Corresponds to the JSON property `doubleValue`
|
|
# @return [Float]
|
|
attr_accessor :double_value
|
|
|
|
# A 64-bit integer. Its range is approximately ±9.2x10<sup>18</sup>.
|
|
# Corresponds to the JSON property `int64Value`
|
|
# @return [Fixnum]
|
|
attr_accessor :int64_value
|
|
|
|
# A variable-length string value.
|
|
# Corresponds to the JSON property `stringValue`
|
|
# @return [String]
|
|
attr_accessor :string_value
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@bool_value = args[:bool_value] if args.key?(:bool_value)
|
|
@distribution_value = args[:distribution_value] if args.key?(:distribution_value)
|
|
@double_value = args[:double_value] if args.key?(:double_value)
|
|
@int64_value = args[:int64_value] if args.key?(:int64_value)
|
|
@string_value = args[:string_value] if args.key?(:string_value)
|
|
end
|
|
end
|
|
|
|
# This message configures which resources and services to monitor for
|
|
# availability.
|
|
class UptimeCheckConfig
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# The expected content on the page the check is run against. Currently, only the
|
|
# first entry in the list is supported, and other entries will be ignored. The
|
|
# server will look for an exact match of the string in the page response's
|
|
# content. This field is optional and should only be specified if a content
|
|
# match is required.
|
|
# Corresponds to the JSON property `contentMatchers`
|
|
# @return [Array<Google::Apis::MonitoringV3::ContentMatcher>]
|
|
attr_accessor :content_matchers
|
|
|
|
# A human-friendly name for the uptime check configuration. The display name
|
|
# should be unique within a Stackdriver Account in order to make it easier to
|
|
# identify; however, uniqueness is not enforced. Required.
|
|
# Corresponds to the JSON property `displayName`
|
|
# @return [String]
|
|
attr_accessor :display_name
|
|
|
|
# Information involved in an HTTP/HTTPS uptime check request.
|
|
# Corresponds to the JSON property `httpCheck`
|
|
# @return [Google::Apis::MonitoringV3::HttpCheck]
|
|
attr_accessor :http_check
|
|
|
|
# The internal checkers that this check will egress from.
|
|
# Corresponds to the JSON property `internalCheckers`
|
|
# @return [Array<Google::Apis::MonitoringV3::InternalChecker>]
|
|
attr_accessor :internal_checkers
|
|
|
|
# An object representing a resource that can be used for monitoring, logging,
|
|
# billing, or other purposes. Examples include virtual machine instances,
|
|
# databases, and storage devices such as disks. The type field identifies a
|
|
# MonitoredResourceDescriptor object that describes the resource's schema.
|
|
# Information in the labels field identifies the actual resource and its
|
|
# attributes according to the schema. For example, a particular Compute Engine
|
|
# VM instance could be represented by the following object, because the
|
|
# MonitoredResourceDescriptor for "gce_instance" has labels "instance_id" and "
|
|
# zone":
|
|
# ` "type": "gce_instance",
|
|
# "labels": ` "instance_id": "12345678901234",
|
|
# "zone": "us-central1-a" ``
|
|
# Corresponds to the JSON property `monitoredResource`
|
|
# @return [Google::Apis::MonitoringV3::MonitoredResource]
|
|
attr_accessor :monitored_resource
|
|
|
|
# A unique resource name for this UptimeCheckConfig. The format is:projects/[
|
|
# PROJECT_ID]/uptimeCheckConfigs/[UPTIME_CHECK_ID].This field should be omitted
|
|
# when creating the uptime check configuration; on create, the resource name is
|
|
# assigned by the server and included in the response.
|
|
# Corresponds to the JSON property `name`
|
|
# @return [String]
|
|
attr_accessor :name
|
|
|
|
# How often the uptime check is performed. Currently, only 1, 5, 10, and 15
|
|
# minutes are supported. Required.
|
|
# Corresponds to the JSON property `period`
|
|
# @return [String]
|
|
attr_accessor :period
|
|
|
|
# The resource submessage for group checks. It can be used instead of a
|
|
# monitored resource, when multiple resources are being monitored.
|
|
# Corresponds to the JSON property `resourceGroup`
|
|
# @return [Google::Apis::MonitoringV3::ResourceGroup]
|
|
attr_accessor :resource_group
|
|
|
|
# The list of regions from which the check will be run. If this field is
|
|
# specified, enough regions to include a minimum of 3 locations must be provided,
|
|
# or an error message is returned. Not specifying this field will result in
|
|
# uptime checks running from all regions.
|
|
# Corresponds to the JSON property `selectedRegions`
|
|
# @return [Array<String>]
|
|
attr_accessor :selected_regions
|
|
|
|
# Information required for a TCP uptime check request.
|
|
# Corresponds to the JSON property `tcpCheck`
|
|
# @return [Google::Apis::MonitoringV3::TcpCheck]
|
|
attr_accessor :tcp_check
|
|
|
|
# The maximum amount of time to wait for the request to complete (must be
|
|
# between 1 and 60 seconds). Required.
|
|
# Corresponds to the JSON property `timeout`
|
|
# @return [String]
|
|
attr_accessor :timeout
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@content_matchers = args[:content_matchers] if args.key?(:content_matchers)
|
|
@display_name = args[:display_name] if args.key?(:display_name)
|
|
@http_check = args[:http_check] if args.key?(:http_check)
|
|
@internal_checkers = args[:internal_checkers] if args.key?(:internal_checkers)
|
|
@monitored_resource = args[:monitored_resource] if args.key?(:monitored_resource)
|
|
@name = args[:name] if args.key?(:name)
|
|
@period = args[:period] if args.key?(:period)
|
|
@resource_group = args[:resource_group] if args.key?(:resource_group)
|
|
@selected_regions = args[:selected_regions] if args.key?(:selected_regions)
|
|
@tcp_check = args[:tcp_check] if args.key?(:tcp_check)
|
|
@timeout = args[:timeout] if args.key?(:timeout)
|
|
end
|
|
end
|
|
|
|
# Contains the region, location, and list of IP addresses where checkers in the
|
|
# location run from.
|
|
class UptimeCheckIp
|
|
include Google::Apis::Core::Hashable
|
|
|
|
# The IP address from which the uptime check originates. This is a full IP
|
|
# address (not an IP address range). Most IP addresses, as of this publication,
|
|
# are in IPv4 format; however, one should not rely on the IP addresses being in
|
|
# IPv4 format indefinitely and should support interpreting this field in either
|
|
# IPv4 or IPv6 format.
|
|
# Corresponds to the JSON property `ipAddress`
|
|
# @return [String]
|
|
attr_accessor :ip_address
|
|
|
|
# A more specific location within the region that typically encodes a particular
|
|
# city/town/metro (and its containing state/province or country) within the
|
|
# broader umbrella region category.
|
|
# Corresponds to the JSON property `location`
|
|
# @return [String]
|
|
attr_accessor :location
|
|
|
|
# A broad region category in which the IP address is located.
|
|
# Corresponds to the JSON property `region`
|
|
# @return [String]
|
|
attr_accessor :region
|
|
|
|
def initialize(**args)
|
|
update!(**args)
|
|
end
|
|
|
|
# Update properties of this object
|
|
def update!(**args)
|
|
@ip_address = args[:ip_address] if args.key?(:ip_address)
|
|
@location = args[:location] if args.key?(:location)
|
|
@region = args[:region] if args.key?(:region)
|
|
end
|
|
end
|
|
end
|
|
end
|
|
end
|