google-api-ruby-client/google-api-client/generated/google/apis/cloudbuild_v1/classes.rb

1726 lines
72 KiB
Ruby

# Copyright 2015 Google Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
require 'date'
require 'google/apis/core/base_service'
require 'google/apis/core/json_representation'
require 'google/apis/core/hashable'
require 'google/apis/errors'
module Google
module Apis
module CloudbuildV1
# Files in the workspace to upload to Cloud Storage upon successful completion
# of all build steps.
class ArtifactObjects
include Google::Apis::Core::Hashable
# Cloud Storage bucket and optional object path, in the form "gs://bucket/path/
# to/somewhere/". (see [Bucket Name Requirements](https://cloud.google.com/
# storage/docs/bucket-naming#requirements)). Files in the workspace matching any
# path pattern will be uploaded to Cloud Storage with this location as a prefix.
# Corresponds to the JSON property `location`
# @return [String]
attr_accessor :location
# Path globs used to match files in the build's workspace.
# Corresponds to the JSON property `paths`
# @return [Array<String>]
attr_accessor :paths
# Start and end times for a build execution phase.
# Corresponds to the JSON property `timing`
# @return [Google::Apis::CloudbuildV1::TimeSpan]
attr_accessor :timing
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@location = args[:location] if args.key?(:location)
@paths = args[:paths] if args.key?(:paths)
@timing = args[:timing] if args.key?(:timing)
end
end
# An artifact that was uploaded during a build. This is a single record in the
# artifact manifest JSON file.
class ArtifactResult
include Google::Apis::Core::Hashable
# The file hash of the artifact.
# Corresponds to the JSON property `fileHash`
# @return [Array<Google::Apis::CloudbuildV1::FileHashes>]
attr_accessor :file_hash
# The path of an artifact in a Google Cloud Storage bucket, with the generation
# number. For example, `gs://mybucket/path/to/output.jar#generation`.
# Corresponds to the JSON property `location`
# @return [String]
attr_accessor :location
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@file_hash = args[:file_hash] if args.key?(:file_hash)
@location = args[:location] if args.key?(:location)
end
end
# Artifacts produced by a build that should be uploaded upon successful
# completion of all build steps.
class Artifacts
include Google::Apis::Core::Hashable
# A list of images to be pushed upon the successful completion of all build
# steps. The images will be pushed using the builder service account's
# credentials. The digests of the pushed images will be stored in the Build
# resource's results field. If any of the images fail to be pushed, the build is
# marked FAILURE.
# Corresponds to the JSON property `images`
# @return [Array<String>]
attr_accessor :images
# Files in the workspace to upload to Cloud Storage upon successful completion
# of all build steps.
# Corresponds to the JSON property `objects`
# @return [Google::Apis::CloudbuildV1::ArtifactObjects]
attr_accessor :objects
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@images = args[:images] if args.key?(:images)
@objects = args[:objects] if args.key?(:objects)
end
end
# A build resource in the Cloud Build API. At a high level, a `Build` describes
# where to find source code, how to build it (for example, the builder image to
# run on the source), and where to store the built artifacts. Fields can include
# the following variables, which will be expanded when the build is created: - $
# PROJECT_ID: the project ID of the build. - $BUILD_ID: the autogenerated ID of
# the build. - $REPO_NAME: the source repository name specified by RepoSource. -
# $BRANCH_NAME: the branch name specified by RepoSource. - $TAG_NAME: the tag
# name specified by RepoSource. - $REVISION_ID or $COMMIT_SHA: the commit SHA
# specified by RepoSource or resolved from the specified branch or tag. - $
# SHORT_SHA: first 7 characters of $REVISION_ID or $COMMIT_SHA.
class Build
include Google::Apis::Core::Hashable
# Artifacts produced by a build that should be uploaded upon successful
# completion of all build steps.
# Corresponds to the JSON property `artifacts`
# @return [Google::Apis::CloudbuildV1::Artifacts]
attr_accessor :artifacts
# Output only. The ID of the `BuildTrigger` that triggered this build, if it was
# triggered automatically.
# Corresponds to the JSON property `buildTriggerId`
# @return [String]
attr_accessor :build_trigger_id
# Output only. Time at which the request to create the build was received.
# Corresponds to the JSON property `createTime`
# @return [String]
attr_accessor :create_time
# Output only. Time at which execution of the build was finished. The difference
# between finish_time and start_time is the duration of the build's execution.
# Corresponds to the JSON property `finishTime`
# @return [String]
attr_accessor :finish_time
# Output only. Unique identifier of the build.
# Corresponds to the JSON property `id`
# @return [String]
attr_accessor :id
# A list of images to be pushed upon the successful completion of all build
# steps. The images are pushed using the builder service account's credentials.
# The digests of the pushed images will be stored in the `Build` resource's
# results field. If any of the images fail to be pushed, the build status is
# marked `FAILURE`.
# Corresponds to the JSON property `images`
# @return [Array<String>]
attr_accessor :images
# Output only. URL to logs for this build in Google Cloud Console.
# Corresponds to the JSON property `logUrl`
# @return [String]
attr_accessor :log_url
# Google Cloud Storage bucket where logs should be written (see [Bucket Name
# Requirements](https://cloud.google.com/storage/docs/bucket-naming#requirements)
# ). Logs file names will be of the format `$`logs_bucket`/log-$`build_id`.txt`.
# Corresponds to the JSON property `logsBucket`
# @return [String]
attr_accessor :logs_bucket
# Output only. The 'Build' name with format: `projects/`project`/locations/`
# location`/builds/`build``, where `build` is a unique identifier generated by
# the service.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# Optional arguments to enable specific features of builds.
# Corresponds to the JSON property `options`
# @return [Google::Apis::CloudbuildV1::BuildOptions]
attr_accessor :options
# Output only. ID of the project.
# Corresponds to the JSON property `projectId`
# @return [String]
attr_accessor :project_id
# TTL in queue for this build. If provided and the build is enqueued longer than
# this value, the build will expire and the build status will be `EXPIRED`. The
# TTL starts ticking from create_time.
# Corresponds to the JSON property `queueTtl`
# @return [String]
attr_accessor :queue_ttl
# Artifacts created by the build pipeline.
# Corresponds to the JSON property `results`
# @return [Google::Apis::CloudbuildV1::Results]
attr_accessor :results
# Secrets to decrypt using Cloud Key Management Service.
# Corresponds to the JSON property `secrets`
# @return [Array<Google::Apis::CloudbuildV1::Secret>]
attr_accessor :secrets
# IAM service account whose credentials will be used at build runtime. Must be
# of the format `projects/`PROJECT_ID`/serviceAccounts/`ACCOUNT``. ACCOUNT can
# be email address or uniqueId of the service account. This field is in beta.
# Corresponds to the JSON property `serviceAccount`
# @return [String]
attr_accessor :service_account
# Location of the source in a supported storage service.
# Corresponds to the JSON property `source`
# @return [Google::Apis::CloudbuildV1::Source]
attr_accessor :source
# Provenance of the source. Ways to find the original source, or verify that
# some source was used for this build.
# Corresponds to the JSON property `sourceProvenance`
# @return [Google::Apis::CloudbuildV1::SourceProvenance]
attr_accessor :source_provenance
# Output only. Time at which execution of the build was started.
# Corresponds to the JSON property `startTime`
# @return [String]
attr_accessor :start_time
# Output only. Status of the build.
# Corresponds to the JSON property `status`
# @return [String]
attr_accessor :status
# Output only. Customer-readable message about the current status.
# Corresponds to the JSON property `statusDetail`
# @return [String]
attr_accessor :status_detail
# Required. The operations to be performed on the workspace.
# Corresponds to the JSON property `steps`
# @return [Array<Google::Apis::CloudbuildV1::BuildStep>]
attr_accessor :steps
# Substitutions data for `Build` resource.
# Corresponds to the JSON property `substitutions`
# @return [Hash<String,String>]
attr_accessor :substitutions
# Tags for annotation of a `Build`. These are not docker tags.
# Corresponds to the JSON property `tags`
# @return [Array<String>]
attr_accessor :tags
# Amount of time that this build should be allowed to run, to second granularity.
# If this amount of time elapses, work on the build will cease and the build
# status will be `TIMEOUT`. `timeout` starts ticking from `startTime`. Default
# time is ten minutes.
# Corresponds to the JSON property `timeout`
# @return [String]
attr_accessor :timeout
# Output only. Stores timing information for phases of the build. Valid keys are:
# * BUILD: time to execute all build steps * PUSH: time to push all specified
# images. * FETCHSOURCE: time to fetch source. If the build does not specify
# source or images, these keys will not be included.
# Corresponds to the JSON property `timing`
# @return [Hash<String,Google::Apis::CloudbuildV1::TimeSpan>]
attr_accessor :timing
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@artifacts = args[:artifacts] if args.key?(:artifacts)
@build_trigger_id = args[:build_trigger_id] if args.key?(:build_trigger_id)
@create_time = args[:create_time] if args.key?(:create_time)
@finish_time = args[:finish_time] if args.key?(:finish_time)
@id = args[:id] if args.key?(:id)
@images = args[:images] if args.key?(:images)
@log_url = args[:log_url] if args.key?(:log_url)
@logs_bucket = args[:logs_bucket] if args.key?(:logs_bucket)
@name = args[:name] if args.key?(:name)
@options = args[:options] if args.key?(:options)
@project_id = args[:project_id] if args.key?(:project_id)
@queue_ttl = args[:queue_ttl] if args.key?(:queue_ttl)
@results = args[:results] if args.key?(:results)
@secrets = args[:secrets] if args.key?(:secrets)
@service_account = args[:service_account] if args.key?(:service_account)
@source = args[:source] if args.key?(:source)
@source_provenance = args[:source_provenance] if args.key?(:source_provenance)
@start_time = args[:start_time] if args.key?(:start_time)
@status = args[:status] if args.key?(:status)
@status_detail = args[:status_detail] if args.key?(:status_detail)
@steps = args[:steps] if args.key?(:steps)
@substitutions = args[:substitutions] if args.key?(:substitutions)
@tags = args[:tags] if args.key?(:tags)
@timeout = args[:timeout] if args.key?(:timeout)
@timing = args[:timing] if args.key?(:timing)
end
end
# Metadata for build operations.
class BuildOperationMetadata
include Google::Apis::Core::Hashable
# A build resource in the Cloud Build API. At a high level, a `Build` describes
# where to find source code, how to build it (for example, the builder image to
# run on the source), and where to store the built artifacts. Fields can include
# the following variables, which will be expanded when the build is created: - $
# PROJECT_ID: the project ID of the build. - $BUILD_ID: the autogenerated ID of
# the build. - $REPO_NAME: the source repository name specified by RepoSource. -
# $BRANCH_NAME: the branch name specified by RepoSource. - $TAG_NAME: the tag
# name specified by RepoSource. - $REVISION_ID or $COMMIT_SHA: the commit SHA
# specified by RepoSource or resolved from the specified branch or tag. - $
# SHORT_SHA: first 7 characters of $REVISION_ID or $COMMIT_SHA.
# Corresponds to the JSON property `build`
# @return [Google::Apis::CloudbuildV1::Build]
attr_accessor :build
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@build = args[:build] if args.key?(:build)
end
end
# Optional arguments to enable specific features of builds.
class BuildOptions
include Google::Apis::Core::Hashable
# Requested disk size for the VM that runs the build. Note that this is *NOT* "
# disk free"; some of the space will be used by the operating system and build
# utilities. Also note that this is the minimum disk size that will be allocated
# for the build -- the build may run with a larger disk than requested. At
# present, the maximum disk size is 1000GB; builds that request more than the
# maximum are rejected with an error.
# Corresponds to the JSON property `diskSizeGb`
# @return [Fixnum]
attr_accessor :disk_size_gb
# Option to specify whether or not to apply bash style string operations to the
# substitutions. NOTE: this is always enabled for triggered builds and cannot be
# overridden in the build configuration file.
# Corresponds to the JSON property `dynamicSubstitutions`
# @return [Boolean]
attr_accessor :dynamic_substitutions
alias_method :dynamic_substitutions?, :dynamic_substitutions
# A list of global environment variable definitions that will exist for all
# build steps in this build. If a variable is defined in both globally and in a
# build step, the variable will use the build step value. The elements are of
# the form "KEY=VALUE" for the environment variable "KEY" being given the value "
# VALUE".
# Corresponds to the JSON property `env`
# @return [Array<String>]
attr_accessor :env
# Option to define build log streaming behavior to Google Cloud Storage.
# Corresponds to the JSON property `logStreamingOption`
# @return [String]
attr_accessor :log_streaming_option
# Option to specify the logging mode, which determines if and where build logs
# are stored.
# Corresponds to the JSON property `logging`
# @return [String]
attr_accessor :logging
# Compute Engine machine type on which to run the build.
# Corresponds to the JSON property `machineType`
# @return [String]
attr_accessor :machine_type
# Requested verifiability options.
# Corresponds to the JSON property `requestedVerifyOption`
# @return [String]
attr_accessor :requested_verify_option
# A list of global environment variables, which are encrypted using a Cloud Key
# Management Service crypto key. These values must be specified in the build's `
# Secret`. These variables will be available to all build steps in this build.
# Corresponds to the JSON property `secretEnv`
# @return [Array<String>]
attr_accessor :secret_env
# Requested hash for SourceProvenance.
# Corresponds to the JSON property `sourceProvenanceHash`
# @return [Array<String>]
attr_accessor :source_provenance_hash
# Option to specify behavior when there is an error in the substitution checks.
# NOTE: this is always set to ALLOW_LOOSE for triggered builds and cannot be
# overridden in the build configuration file.
# Corresponds to the JSON property `substitutionOption`
# @return [String]
attr_accessor :substitution_option
# Global list of volumes to mount for ALL build steps Each volume is created as
# an empty volume prior to starting the build process. Upon completion of the
# build, volumes and their contents are discarded. Global volume names and paths
# cannot conflict with the volumes defined a build step. Using a global volume
# in a build with only one step is not valid as it is indicative of a build
# request with an incorrect configuration.
# Corresponds to the JSON property `volumes`
# @return [Array<Google::Apis::CloudbuildV1::Volume>]
attr_accessor :volumes
# Option to specify a `WorkerPool` for the build. Format: projects/`project`/
# locations/`location`/workerPools/`workerPool` This field is in beta and is
# available only to restricted users.
# Corresponds to the JSON property `workerPool`
# @return [String]
attr_accessor :worker_pool
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@disk_size_gb = args[:disk_size_gb] if args.key?(:disk_size_gb)
@dynamic_substitutions = args[:dynamic_substitutions] if args.key?(:dynamic_substitutions)
@env = args[:env] if args.key?(:env)
@log_streaming_option = args[:log_streaming_option] if args.key?(:log_streaming_option)
@logging = args[:logging] if args.key?(:logging)
@machine_type = args[:machine_type] if args.key?(:machine_type)
@requested_verify_option = args[:requested_verify_option] if args.key?(:requested_verify_option)
@secret_env = args[:secret_env] if args.key?(:secret_env)
@source_provenance_hash = args[:source_provenance_hash] if args.key?(:source_provenance_hash)
@substitution_option = args[:substitution_option] if args.key?(:substitution_option)
@volumes = args[:volumes] if args.key?(:volumes)
@worker_pool = args[:worker_pool] if args.key?(:worker_pool)
end
end
# A step in the build pipeline.
class BuildStep
include Google::Apis::Core::Hashable
# A list of arguments that will be presented to the step when it is started. If
# the image used to run the step's container has an entrypoint, the `args` are
# used as arguments to that entrypoint. If the image does not define an
# entrypoint, the first element in args is used as the entrypoint, and the
# remainder will be used as arguments.
# Corresponds to the JSON property `args`
# @return [Array<String>]
attr_accessor :args
# Working directory to use when running this step's container. If this value is
# a relative path, it is relative to the build's working directory. If this
# value is absolute, it may be outside the build's working directory, in which
# case the contents of the path may not be persisted across build step
# executions, unless a `volume` for that path is specified. If the build
# specifies a `RepoSource` with `dir` and a step with a `dir`, which specifies
# an absolute path, the `RepoSource` `dir` is ignored for the step's execution.
# Corresponds to the JSON property `dir`
# @return [String]
attr_accessor :dir
# Entrypoint to be used instead of the build step image's default entrypoint. If
# unset, the image's default entrypoint is used.
# Corresponds to the JSON property `entrypoint`
# @return [String]
attr_accessor :entrypoint
# A list of environment variable definitions to be used when running a step. The
# elements are of the form "KEY=VALUE" for the environment variable "KEY" being
# given the value "VALUE".
# Corresponds to the JSON property `env`
# @return [Array<String>]
attr_accessor :env
# Unique identifier for this build step, used in `wait_for` to reference this
# build step as a dependency.
# Corresponds to the JSON property `id`
# @return [String]
attr_accessor :id
# Required. The name of the container image that will run this particular build
# step. If the image is available in the host's Docker daemon's cache, it will
# be run directly. If not, the host will attempt to pull the image first, using
# the builder service account's credentials if necessary. The Docker daemon's
# cache will already have the latest versions of all of the officially supported
# build steps ([https://github.com/GoogleCloudPlatform/cloud-builders](https://
# github.com/GoogleCloudPlatform/cloud-builders)). The Docker daemon will also
# have cached many of the layers for some popular images, like "ubuntu", "debian"
# , but they will be refreshed at the time you attempt to use them. If you built
# an image in a previous build step, it will be stored in the host's Docker
# daemon's cache and is available to use as the name for a later build step.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# Start and end times for a build execution phase.
# Corresponds to the JSON property `pullTiming`
# @return [Google::Apis::CloudbuildV1::TimeSpan]
attr_accessor :pull_timing
# A list of environment variables which are encrypted using a Cloud Key
# Management Service crypto key. These values must be specified in the build's `
# Secret`.
# Corresponds to the JSON property `secretEnv`
# @return [Array<String>]
attr_accessor :secret_env
# Output only. Status of the build step. At this time, build step status is only
# updated on build completion; step status is not updated in real-time as the
# build progresses.
# Corresponds to the JSON property `status`
# @return [String]
attr_accessor :status
# Time limit for executing this build step. If not defined, the step has no time
# limit and will be allowed to continue to run until either it completes or the
# build itself times out.
# Corresponds to the JSON property `timeout`
# @return [String]
attr_accessor :timeout
# Start and end times for a build execution phase.
# Corresponds to the JSON property `timing`
# @return [Google::Apis::CloudbuildV1::TimeSpan]
attr_accessor :timing
# List of volumes to mount into the build step. Each volume is created as an
# empty volume prior to execution of the build step. Upon completion of the
# build, volumes and their contents are discarded. Using a named volume in only
# one step is not valid as it is indicative of a build request with an incorrect
# configuration.
# Corresponds to the JSON property `volumes`
# @return [Array<Google::Apis::CloudbuildV1::Volume>]
attr_accessor :volumes
# The ID(s) of the step(s) that this build step depends on. This build step will
# not start until all the build steps in `wait_for` have completed successfully.
# If `wait_for` is empty, this build step will start when all previous build
# steps in the `Build.Steps` list have completed successfully.
# Corresponds to the JSON property `waitFor`
# @return [Array<String>]
attr_accessor :wait_for
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@args = args[:args] if args.key?(:args)
@dir = args[:dir] if args.key?(:dir)
@entrypoint = args[:entrypoint] if args.key?(:entrypoint)
@env = args[:env] if args.key?(:env)
@id = args[:id] if args.key?(:id)
@name = args[:name] if args.key?(:name)
@pull_timing = args[:pull_timing] if args.key?(:pull_timing)
@secret_env = args[:secret_env] if args.key?(:secret_env)
@status = args[:status] if args.key?(:status)
@timeout = args[:timeout] if args.key?(:timeout)
@timing = args[:timing] if args.key?(:timing)
@volumes = args[:volumes] if args.key?(:volumes)
@wait_for = args[:wait_for] if args.key?(:wait_for)
end
end
# Configuration for an automated build in response to source repository changes.
class BuildTrigger
include Google::Apis::Core::Hashable
# A build resource in the Cloud Build API. At a high level, a `Build` describes
# where to find source code, how to build it (for example, the builder image to
# run on the source), and where to store the built artifacts. Fields can include
# the following variables, which will be expanded when the build is created: - $
# PROJECT_ID: the project ID of the build. - $BUILD_ID: the autogenerated ID of
# the build. - $REPO_NAME: the source repository name specified by RepoSource. -
# $BRANCH_NAME: the branch name specified by RepoSource. - $TAG_NAME: the tag
# name specified by RepoSource. - $REVISION_ID or $COMMIT_SHA: the commit SHA
# specified by RepoSource or resolved from the specified branch or tag. - $
# SHORT_SHA: first 7 characters of $REVISION_ID or $COMMIT_SHA.
# Corresponds to the JSON property `build`
# @return [Google::Apis::CloudbuildV1::Build]
attr_accessor :build
# Output only. Time when the trigger was created.
# Corresponds to the JSON property `createTime`
# @return [String]
attr_accessor :create_time
# Human-readable description of this trigger.
# Corresponds to the JSON property `description`
# @return [String]
attr_accessor :description
# If true, the trigger will never automatically execute a build.
# Corresponds to the JSON property `disabled`
# @return [Boolean]
attr_accessor :disabled
alias_method :disabled?, :disabled
# Path, from the source root, to a file whose contents is used for the template.
# Corresponds to the JSON property `filename`
# @return [String]
attr_accessor :filename
# GitHubEventsConfig describes the configuration of a trigger that creates a
# build whenever a GitHub event is received. This message is experimental.
# Corresponds to the JSON property `github`
# @return [Google::Apis::CloudbuildV1::GitHubEventsConfig]
attr_accessor :github
# Output only. Unique identifier of the trigger.
# Corresponds to the JSON property `id`
# @return [String]
attr_accessor :id
# ignored_files and included_files are file glob matches using https://golang.
# org/pkg/path/filepath/#Match extended with support for "**". If ignored_files
# and changed files are both empty, then they are not used to determine whether
# or not to trigger a build. If ignored_files is not empty, then we ignore any
# files that match any of the ignored_file globs. If the change has no files
# that are outside of the ignored_files globs, then we do not trigger a build.
# Corresponds to the JSON property `ignoredFiles`
# @return [Array<String>]
attr_accessor :ignored_files
# If any of the files altered in the commit pass the ignored_files filter and
# included_files is empty, then as far as this filter is concerned, we should
# trigger the build. If any of the files altered in the commit pass the
# ignored_files filter and included_files is not empty, then we make sure that
# at least one of those files matches a included_files glob. If not, then we do
# not trigger a build.
# Corresponds to the JSON property `includedFiles`
# @return [Array<String>]
attr_accessor :included_files
# User-assigned name of the trigger. Must be unique within the project. Trigger
# names must meet the following requirements: + They must contain only
# alphanumeric characters and dashes. + They can be 1-64 characters long. + They
# must begin and end with an alphanumeric character.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# Substitutions for Build resource. The keys must match the following regular
# expression: `^_[A-Z0-9_]+$`.
# Corresponds to the JSON property `substitutions`
# @return [Hash<String,String>]
attr_accessor :substitutions
# Tags for annotation of a `BuildTrigger`
# Corresponds to the JSON property `tags`
# @return [Array<String>]
attr_accessor :tags
# Location of the source in a Google Cloud Source Repository.
# Corresponds to the JSON property `triggerTemplate`
# @return [Google::Apis::CloudbuildV1::RepoSource]
attr_accessor :trigger_template
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@build = args[:build] if args.key?(:build)
@create_time = args[:create_time] if args.key?(:create_time)
@description = args[:description] if args.key?(:description)
@disabled = args[:disabled] if args.key?(:disabled)
@filename = args[:filename] if args.key?(:filename)
@github = args[:github] if args.key?(:github)
@id = args[:id] if args.key?(:id)
@ignored_files = args[:ignored_files] if args.key?(:ignored_files)
@included_files = args[:included_files] if args.key?(:included_files)
@name = args[:name] if args.key?(:name)
@substitutions = args[:substitutions] if args.key?(:substitutions)
@tags = args[:tags] if args.key?(:tags)
@trigger_template = args[:trigger_template] if args.key?(:trigger_template)
end
end
# An image built by the pipeline.
class BuiltImage
include Google::Apis::Core::Hashable
# Docker Registry 2.0 digest.
# Corresponds to the JSON property `digest`
# @return [String]
attr_accessor :digest
# Name used to push the container image to Google Container Registry, as
# presented to `docker push`.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# Start and end times for a build execution phase.
# Corresponds to the JSON property `pushTiming`
# @return [Google::Apis::CloudbuildV1::TimeSpan]
attr_accessor :push_timing
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@digest = args[:digest] if args.key?(:digest)
@name = args[:name] if args.key?(:name)
@push_timing = args[:push_timing] if args.key?(:push_timing)
end
end
# Request to cancel an ongoing build.
class CancelBuildRequest
include Google::Apis::Core::Hashable
# Required. ID of the build.
# Corresponds to the JSON property `id`
# @return [String]
attr_accessor :id
# The name of the `Build` to cancel. Format: `projects/`project`/locations/`
# location`/builds/`build``
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# Required. ID of the project.
# Corresponds to the JSON property `projectId`
# @return [String]
attr_accessor :project_id
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@id = args[:id] if args.key?(:id)
@name = args[:name] if args.key?(:name)
@project_id = args[:project_id] if args.key?(:project_id)
end
end
# The request message for Operations.CancelOperation.
class CancelOperationRequest
include Google::Apis::Core::Hashable
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
end
end
# A generic empty message that you can re-use to avoid defining duplicated empty
# messages in your APIs. A typical example is to use it as the request or the
# response type of an API method. For instance: service Foo ` rpc Bar(google.
# protobuf.Empty) returns (google.protobuf.Empty); ` The JSON representation for
# `Empty` is empty JSON object ````.
class Empty
include Google::Apis::Core::Hashable
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
end
end
# Container message for hashes of byte content of files, used in
# SourceProvenance messages to verify integrity of source input to the build.
class FileHashes
include Google::Apis::Core::Hashable
# Collection of file hashes.
# Corresponds to the JSON property `fileHash`
# @return [Array<Google::Apis::CloudbuildV1::HashProp>]
attr_accessor :file_hash
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@file_hash = args[:file_hash] if args.key?(:file_hash)
end
end
# GitHubEventsConfig describes the configuration of a trigger that creates a
# build whenever a GitHub event is received. This message is experimental.
class GitHubEventsConfig
include Google::Apis::Core::Hashable
# The installationID that emits the GitHub event.
# Corresponds to the JSON property `installationId`
# @return [Fixnum]
attr_accessor :installation_id
# Name of the repository. For example: The name for https://github.com/
# googlecloudplatform/cloud-builders is "cloud-builders".
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# Owner of the repository. For example: The owner for https://github.com/
# googlecloudplatform/cloud-builders is "googlecloudplatform".
# Corresponds to the JSON property `owner`
# @return [String]
attr_accessor :owner
# PullRequestFilter contains filter properties for matching GitHub Pull Requests.
# Corresponds to the JSON property `pullRequest`
# @return [Google::Apis::CloudbuildV1::PullRequestFilter]
attr_accessor :pull_request
# Push contains filter properties for matching GitHub git pushes.
# Corresponds to the JSON property `push`
# @return [Google::Apis::CloudbuildV1::PushFilter]
attr_accessor :push
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@installation_id = args[:installation_id] if args.key?(:installation_id)
@name = args[:name] if args.key?(:name)
@owner = args[:owner] if args.key?(:owner)
@pull_request = args[:pull_request] if args.key?(:pull_request)
@push = args[:push] if args.key?(:push)
end
end
# HTTPDelivery is the delivery configuration for an HTTP notification.
class HttpDelivery
include Google::Apis::Core::Hashable
# The URI to which JSON-containing HTTP POST requests should be sent.
# Corresponds to the JSON property `uri`
# @return [String]
attr_accessor :uri
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@uri = args[:uri] if args.key?(:uri)
end
end
# Container message for hash values.
class HashProp
include Google::Apis::Core::Hashable
# The type of hash that was performed.
# Corresponds to the JSON property `type`
# @return [String]
attr_accessor :type
# The hash value.
# Corresponds to the JSON property `value`
# NOTE: Values are automatically base64 encoded/decoded in the client library.
# @return [String]
attr_accessor :value
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@type = args[:type] if args.key?(:type)
@value = args[:value] if args.key?(:value)
end
end
# Response containing existing `BuildTriggers`.
class ListBuildTriggersResponse
include Google::Apis::Core::Hashable
# Token to receive the next page of results.
# Corresponds to the JSON property `nextPageToken`
# @return [String]
attr_accessor :next_page_token
# `BuildTriggers` for the project, sorted by `create_time` descending.
# Corresponds to the JSON property `triggers`
# @return [Array<Google::Apis::CloudbuildV1::BuildTrigger>]
attr_accessor :triggers
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@next_page_token = args[:next_page_token] if args.key?(:next_page_token)
@triggers = args[:triggers] if args.key?(:triggers)
end
end
# Response including listed builds.
class ListBuildsResponse
include Google::Apis::Core::Hashable
# Builds will be sorted by `create_time`, descending.
# Corresponds to the JSON property `builds`
# @return [Array<Google::Apis::CloudbuildV1::Build>]
attr_accessor :builds
# Token to receive the next page of results. This will be absent if the end of
# the response list has been reached.
# Corresponds to the JSON property `nextPageToken`
# @return [String]
attr_accessor :next_page_token
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@builds = args[:builds] if args.key?(:builds)
@next_page_token = args[:next_page_token] if args.key?(:next_page_token)
end
end
# Notification is the container which holds the data that is relevant to this
# particular notification.
class Notification
include Google::Apis::Core::Hashable
# The filter string to use for notification filtering. Currently, this is
# assumed to be a CEL program. See https://opensource.google/projects/cel for
# more.
# Corresponds to the JSON property `filter`
# @return [String]
attr_accessor :filter
# HTTPDelivery is the delivery configuration for an HTTP notification.
# Corresponds to the JSON property `httpDelivery`
# @return [Google::Apis::CloudbuildV1::HttpDelivery]
attr_accessor :http_delivery
# SlackDelivery is the delivery configuration for delivering Slack messages via
# webhooks. See Slack webhook documentation at: https://api.slack.com/messaging/
# webhooks.
# Corresponds to the JSON property `slackDelivery`
# @return [Google::Apis::CloudbuildV1::SlackDelivery]
attr_accessor :slack_delivery
# SMTPDelivery is the delivery configuration for an SMTP (email) notification.
# Corresponds to the JSON property `smtpDelivery`
# @return [Google::Apis::CloudbuildV1::SmtpDelivery]
attr_accessor :smtp_delivery
# Escape hatch for users to supply custom delivery configs.
# Corresponds to the JSON property `structDelivery`
# @return [Hash<String,Object>]
attr_accessor :struct_delivery
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@filter = args[:filter] if args.key?(:filter)
@http_delivery = args[:http_delivery] if args.key?(:http_delivery)
@slack_delivery = args[:slack_delivery] if args.key?(:slack_delivery)
@smtp_delivery = args[:smtp_delivery] if args.key?(:smtp_delivery)
@struct_delivery = args[:struct_delivery] if args.key?(:struct_delivery)
end
end
# NotifierConfig is the top-level configuration message.
class NotifierConfig
include Google::Apis::Core::Hashable
# The API version of this configuration format.
# Corresponds to the JSON property `apiVersion`
# @return [String]
attr_accessor :api_version
# The type of notifier to use (e.g. SMTPNotifier).
# Corresponds to the JSON property `kind`
# @return [String]
attr_accessor :kind
# NotifierMetadata contains the data which can be used to reference or describe
# this notifier.
# Corresponds to the JSON property `metadata`
# @return [Google::Apis::CloudbuildV1::NotifierMetadata]
attr_accessor :metadata
# NotifierSpec is the configuration container for notifications.
# Corresponds to the JSON property `spec`
# @return [Google::Apis::CloudbuildV1::NotifierSpec]
attr_accessor :spec
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@api_version = args[:api_version] if args.key?(:api_version)
@kind = args[:kind] if args.key?(:kind)
@metadata = args[:metadata] if args.key?(:metadata)
@spec = args[:spec] if args.key?(:spec)
end
end
# NotifierMetadata contains the data which can be used to reference or describe
# this notifier.
class NotifierMetadata
include Google::Apis::Core::Hashable
# The human-readable and user-given name for the notifier. For example: "repo-
# merge-email-notifier".
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# The string representing the name and version of notifier to deploy. Expected
# to be of the form of "/:". For example: "gcr.io/my-project/notifiers/smtp:1.2.
# 34".
# Corresponds to the JSON property `notifier`
# @return [String]
attr_accessor :notifier
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@name = args[:name] if args.key?(:name)
@notifier = args[:notifier] if args.key?(:notifier)
end
end
# NotifierSecret is the container that maps a secret name (reference) to its
# Google Cloud Secret Manager resource path.
class NotifierSecret
include Google::Apis::Core::Hashable
# Name is the local name of the secret, such as the verbatim string "my-smtp-
# password".
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# Value is interpreted to be a resource path for fetching the actual (versioned)
# secret data for this secret. For example, this would be a Google Cloud Secret
# Manager secret version resource path like: "projects/my-project/secrets/my-
# secret/versions/latest".
# Corresponds to the JSON property `value`
# @return [String]
attr_accessor :value
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@name = args[:name] if args.key?(:name)
@value = args[:value] if args.key?(:value)
end
end
# NotifierSecretRef contains the reference to a secret stored in the
# corresponding NotifierSpec.
class NotifierSecretRef
include Google::Apis::Core::Hashable
# The value of `secret_ref` should be a `name` that is registered in a `Secret`
# in the `secrets` list of the `Spec`.
# Corresponds to the JSON property `secretRef`
# @return [String]
attr_accessor :secret_ref
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@secret_ref = args[:secret_ref] if args.key?(:secret_ref)
end
end
# NotifierSpec is the configuration container for notifications.
class NotifierSpec
include Google::Apis::Core::Hashable
# Notification is the container which holds the data that is relevant to this
# particular notification.
# Corresponds to the JSON property `notification`
# @return [Google::Apis::CloudbuildV1::Notification]
attr_accessor :notification
# Configurations for secret resources used by this particular notifier.
# Corresponds to the JSON property `secrets`
# @return [Array<Google::Apis::CloudbuildV1::NotifierSecret>]
attr_accessor :secrets
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@notification = args[:notification] if args.key?(:notification)
@secrets = args[:secrets] if args.key?(:secrets)
end
end
# This resource represents a long-running operation that is the result of a
# network API call.
class Operation
include Google::Apis::Core::Hashable
# If the value is `false`, it means the operation is still in progress. If `true`
# , the operation is completed, and either `error` or `response` is available.
# Corresponds to the JSON property `done`
# @return [Boolean]
attr_accessor :done
alias_method :done?, :done
# The `Status` type defines a logical error model that is suitable for different
# programming environments, including REST APIs and RPC APIs. It is used by [
# gRPC](https://github.com/grpc). Each `Status` message contains three pieces of
# data: error code, error message, and error details. You can find out more
# about this error model and how to work with it in the [API Design Guide](https:
# //cloud.google.com/apis/design/errors).
# Corresponds to the JSON property `error`
# @return [Google::Apis::CloudbuildV1::Status]
attr_accessor :error
# Service-specific metadata associated with the operation. It typically contains
# progress information and common metadata such as create time. Some services
# might not provide such metadata. Any method that returns a long-running
# operation should document the metadata type, if any.
# Corresponds to the JSON property `metadata`
# @return [Hash<String,Object>]
attr_accessor :metadata
# The server-assigned name, which is only unique within the same service that
# originally returns it. If you use the default HTTP mapping, the `name` should
# be a resource name ending with `operations/`unique_id``.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# The normal response of the operation in case of success. If the original
# method returns no data on success, such as `Delete`, the response is `google.
# protobuf.Empty`. If the original method is standard `Get`/`Create`/`Update`,
# the response should be the resource. For other methods, the response should
# have the type `XxxResponse`, where `Xxx` is the original method name. For
# example, if the original method name is `TakeSnapshot()`, the inferred
# response type is `TakeSnapshotResponse`.
# Corresponds to the JSON property `response`
# @return [Hash<String,Object>]
attr_accessor :response
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@done = args[:done] if args.key?(:done)
@error = args[:error] if args.key?(:error)
@metadata = args[:metadata] if args.key?(:metadata)
@name = args[:name] if args.key?(:name)
@response = args[:response] if args.key?(:response)
end
end
# PullRequestFilter contains filter properties for matching GitHub Pull Requests.
class PullRequestFilter
include Google::Apis::Core::Hashable
# Regex of branches to match. The syntax of the regular expressions accepted is
# the syntax accepted by RE2 and described at https://github.com/google/re2/wiki/
# Syntax
# Corresponds to the JSON property `branch`
# @return [String]
attr_accessor :branch
# Configure builds to run whether a repository owner or collaborator need to
# comment `/gcbrun`.
# Corresponds to the JSON property `commentControl`
# @return [String]
attr_accessor :comment_control
# If true, branches that do NOT match the git_ref will trigger a build.
# Corresponds to the JSON property `invertRegex`
# @return [Boolean]
attr_accessor :invert_regex
alias_method :invert_regex?, :invert_regex
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@branch = args[:branch] if args.key?(:branch)
@comment_control = args[:comment_control] if args.key?(:comment_control)
@invert_regex = args[:invert_regex] if args.key?(:invert_regex)
end
end
# Push contains filter properties for matching GitHub git pushes.
class PushFilter
include Google::Apis::Core::Hashable
# Regexes matching branches to build. The syntax of the regular expressions
# accepted is the syntax accepted by RE2 and described at https://github.com/
# google/re2/wiki/Syntax
# Corresponds to the JSON property `branch`
# @return [String]
attr_accessor :branch
# When true, only trigger a build if the revision regex does NOT match the
# git_ref regex.
# Corresponds to the JSON property `invertRegex`
# @return [Boolean]
attr_accessor :invert_regex
alias_method :invert_regex?, :invert_regex
# Regexes matching tags to build. The syntax of the regular expressions accepted
# is the syntax accepted by RE2 and described at https://github.com/google/re2/
# wiki/Syntax
# Corresponds to the JSON property `tag`
# @return [String]
attr_accessor :tag
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@branch = args[:branch] if args.key?(:branch)
@invert_regex = args[:invert_regex] if args.key?(:invert_regex)
@tag = args[:tag] if args.key?(:tag)
end
end
# Location of the source in a Google Cloud Source Repository.
class RepoSource
include Google::Apis::Core::Hashable
# Regex matching branches to build. The syntax of the regular expressions
# accepted is the syntax accepted by RE2 and described at https://github.com/
# google/re2/wiki/Syntax
# Corresponds to the JSON property `branchName`
# @return [String]
attr_accessor :branch_name
# Explicit commit SHA to build.
# Corresponds to the JSON property `commitSha`
# @return [String]
attr_accessor :commit_sha
# Directory, relative to the source root, in which to run the build. This must
# be a relative path. If a step's `dir` is specified and is an absolute path,
# this value is ignored for that step's execution.
# Corresponds to the JSON property `dir`
# @return [String]
attr_accessor :dir
# Only trigger a build if the revision regex does NOT match the revision regex.
# Corresponds to the JSON property `invertRegex`
# @return [Boolean]
attr_accessor :invert_regex
alias_method :invert_regex?, :invert_regex
# ID of the project that owns the Cloud Source Repository. If omitted, the
# project ID requesting the build is assumed.
# Corresponds to the JSON property `projectId`
# @return [String]
attr_accessor :project_id
# Required. Name of the Cloud Source Repository.
# Corresponds to the JSON property `repoName`
# @return [String]
attr_accessor :repo_name
# Substitutions to use in a triggered build. Should only be used with
# RunBuildTrigger
# Corresponds to the JSON property `substitutions`
# @return [Hash<String,String>]
attr_accessor :substitutions
# Regex matching tags to build. The syntax of the regular expressions accepted
# is the syntax accepted by RE2 and described at https://github.com/google/re2/
# wiki/Syntax
# Corresponds to the JSON property `tagName`
# @return [String]
attr_accessor :tag_name
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@branch_name = args[:branch_name] if args.key?(:branch_name)
@commit_sha = args[:commit_sha] if args.key?(:commit_sha)
@dir = args[:dir] if args.key?(:dir)
@invert_regex = args[:invert_regex] if args.key?(:invert_regex)
@project_id = args[:project_id] if args.key?(:project_id)
@repo_name = args[:repo_name] if args.key?(:repo_name)
@substitutions = args[:substitutions] if args.key?(:substitutions)
@tag_name = args[:tag_name] if args.key?(:tag_name)
end
end
# Artifacts created by the build pipeline.
class Results
include Google::Apis::Core::Hashable
# Path to the artifact manifest. Only populated when artifacts are uploaded.
# Corresponds to the JSON property `artifactManifest`
# @return [String]
attr_accessor :artifact_manifest
# Start and end times for a build execution phase.
# Corresponds to the JSON property `artifactTiming`
# @return [Google::Apis::CloudbuildV1::TimeSpan]
attr_accessor :artifact_timing
# List of build step digests, in the order corresponding to build step indices.
# Corresponds to the JSON property `buildStepImages`
# @return [Array<String>]
attr_accessor :build_step_images
# List of build step outputs, produced by builder images, in the order
# corresponding to build step indices. [Cloud Builders](https://cloud.google.com/
# cloud-build/docs/cloud-builders) can produce this output by writing to `$
# BUILDER_OUTPUT/output`. Only the first 4KB of data is stored.
# Corresponds to the JSON property `buildStepOutputs`
# @return [Array<String>]
attr_accessor :build_step_outputs
# Container images that were built as a part of the build.
# Corresponds to the JSON property `images`
# @return [Array<Google::Apis::CloudbuildV1::BuiltImage>]
attr_accessor :images
# Number of artifacts uploaded. Only populated when artifacts are uploaded.
# Corresponds to the JSON property `numArtifacts`
# @return [Fixnum]
attr_accessor :num_artifacts
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@artifact_manifest = args[:artifact_manifest] if args.key?(:artifact_manifest)
@artifact_timing = args[:artifact_timing] if args.key?(:artifact_timing)
@build_step_images = args[:build_step_images] if args.key?(:build_step_images)
@build_step_outputs = args[:build_step_outputs] if args.key?(:build_step_outputs)
@images = args[:images] if args.key?(:images)
@num_artifacts = args[:num_artifacts] if args.key?(:num_artifacts)
end
end
# Specifies a build to retry.
class RetryBuildRequest
include Google::Apis::Core::Hashable
# Required. Build ID of the original build.
# Corresponds to the JSON property `id`
# @return [String]
attr_accessor :id
# The name of the `Build` to retry. Format: `projects/`project`/locations/`
# location`/builds/`build``
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# Required. ID of the project.
# Corresponds to the JSON property `projectId`
# @return [String]
attr_accessor :project_id
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@id = args[:id] if args.key?(:id)
@name = args[:name] if args.key?(:name)
@project_id = args[:project_id] if args.key?(:project_id)
end
end
# SMTPDelivery is the delivery configuration for an SMTP (email) notification.
class SmtpDelivery
include Google::Apis::Core::Hashable
# This is the SMTP account/email that appears in the `From:` of the email. If
# empty, it is assumed to be sender.
# Corresponds to the JSON property `fromAddress`
# @return [String]
attr_accessor :from_address
# NotifierSecretRef contains the reference to a secret stored in the
# corresponding NotifierSpec.
# Corresponds to the JSON property `password`
# @return [Google::Apis::CloudbuildV1::NotifierSecretRef]
attr_accessor :password
# The SMTP port of the server.
# Corresponds to the JSON property `port`
# @return [String]
attr_accessor :port
# This is the list of addresses to which we send the email (i.e. in the `To:` of
# the email).
# Corresponds to the JSON property `recipientAddresses`
# @return [Array<String>]
attr_accessor :recipient_addresses
# This is the SMTP account/email that is used to send the message.
# Corresponds to the JSON property `senderAddress`
# @return [String]
attr_accessor :sender_address
# The address of the SMTP server.
# Corresponds to the JSON property `server`
# @return [String]
attr_accessor :server
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@from_address = args[:from_address] if args.key?(:from_address)
@password = args[:password] if args.key?(:password)
@port = args[:port] if args.key?(:port)
@recipient_addresses = args[:recipient_addresses] if args.key?(:recipient_addresses)
@sender_address = args[:sender_address] if args.key?(:sender_address)
@server = args[:server] if args.key?(:server)
end
end
# Pairs a set of secret environment variables containing encrypted values with
# the Cloud KMS key to use to decrypt the value.
class Secret
include Google::Apis::Core::Hashable
# Cloud KMS key name to use to decrypt these envs.
# Corresponds to the JSON property `kmsKeyName`
# @return [String]
attr_accessor :kms_key_name
# Map of environment variable name to its encrypted value. Secret environment
# variables must be unique across all of a build's secrets, and must be used by
# at least one build step. Values can be at most 64 KB in size. There can be at
# most 100 secret values across all of a build's secrets.
# Corresponds to the JSON property `secretEnv`
# @return [Hash<String,String>]
attr_accessor :secret_env
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@kms_key_name = args[:kms_key_name] if args.key?(:kms_key_name)
@secret_env = args[:secret_env] if args.key?(:secret_env)
end
end
# SlackDelivery is the delivery configuration for delivering Slack messages via
# webhooks. See Slack webhook documentation at: https://api.slack.com/messaging/
# webhooks.
class SlackDelivery
include Google::Apis::Core::Hashable
# NotifierSecretRef contains the reference to a secret stored in the
# corresponding NotifierSpec.
# Corresponds to the JSON property `webhookUri`
# @return [Google::Apis::CloudbuildV1::NotifierSecretRef]
attr_accessor :webhook_uri
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@webhook_uri = args[:webhook_uri] if args.key?(:webhook_uri)
end
end
# Location of the source in a supported storage service.
class Source
include Google::Apis::Core::Hashable
# Location of the source in a Google Cloud Source Repository.
# Corresponds to the JSON property `repoSource`
# @return [Google::Apis::CloudbuildV1::RepoSource]
attr_accessor :repo_source
# Location of the source in an archive file in Google Cloud Storage.
# Corresponds to the JSON property `storageSource`
# @return [Google::Apis::CloudbuildV1::StorageSource]
attr_accessor :storage_source
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@repo_source = args[:repo_source] if args.key?(:repo_source)
@storage_source = args[:storage_source] if args.key?(:storage_source)
end
end
# Provenance of the source. Ways to find the original source, or verify that
# some source was used for this build.
class SourceProvenance
include Google::Apis::Core::Hashable
# Output only. Hash(es) of the build source, which can be used to verify that
# the original source integrity was maintained in the build. Note that `
# FileHashes` will only be populated if `BuildOptions` has requested a `
# SourceProvenanceHash`. The keys to this map are file paths used as build
# source and the values contain the hash values for those files. If the build
# source came in a single package such as a gzipped tarfile (`.tar.gz`), the `
# FileHash` will be for the single path to that file.
# Corresponds to the JSON property `fileHashes`
# @return [Hash<String,Google::Apis::CloudbuildV1::FileHashes>]
attr_accessor :file_hashes
# Location of the source in a Google Cloud Source Repository.
# Corresponds to the JSON property `resolvedRepoSource`
# @return [Google::Apis::CloudbuildV1::RepoSource]
attr_accessor :resolved_repo_source
# Location of the source in an archive file in Google Cloud Storage.
# Corresponds to the JSON property `resolvedStorageSource`
# @return [Google::Apis::CloudbuildV1::StorageSource]
attr_accessor :resolved_storage_source
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@file_hashes = args[:file_hashes] if args.key?(:file_hashes)
@resolved_repo_source = args[:resolved_repo_source] if args.key?(:resolved_repo_source)
@resolved_storage_source = args[:resolved_storage_source] if args.key?(:resolved_storage_source)
end
end
# The `Status` type defines a logical error model that is suitable for different
# programming environments, including REST APIs and RPC APIs. It is used by [
# gRPC](https://github.com/grpc). Each `Status` message contains three pieces of
# data: error code, error message, and error details. You can find out more
# about this error model and how to work with it in the [API Design Guide](https:
# //cloud.google.com/apis/design/errors).
class Status
include Google::Apis::Core::Hashable
# The status code, which should be an enum value of google.rpc.Code.
# Corresponds to the JSON property `code`
# @return [Fixnum]
attr_accessor :code
# A list of messages that carry the error details. There is a common set of
# message types for APIs to use.
# Corresponds to the JSON property `details`
# @return [Array<Hash<String,Object>>]
attr_accessor :details
# A developer-facing error message, which should be in English. Any user-facing
# error message should be localized and sent in the google.rpc.Status.details
# field, or localized by the client.
# Corresponds to the JSON property `message`
# @return [String]
attr_accessor :message
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@code = args[:code] if args.key?(:code)
@details = args[:details] if args.key?(:details)
@message = args[:message] if args.key?(:message)
end
end
# Location of the source in an archive file in Google Cloud Storage.
class StorageSource
include Google::Apis::Core::Hashable
# Google Cloud Storage bucket containing the source (see [Bucket Name
# Requirements](https://cloud.google.com/storage/docs/bucket-naming#requirements)
# ).
# Corresponds to the JSON property `bucket`
# @return [String]
attr_accessor :bucket
# Google Cloud Storage generation for the object. If the generation is omitted,
# the latest generation will be used.
# Corresponds to the JSON property `generation`
# @return [Fixnum]
attr_accessor :generation
# Google Cloud Storage object containing the source. This object must be a
# gzipped archive file (`.tar.gz`) containing source to build.
# Corresponds to the JSON property `object`
# @return [String]
attr_accessor :object
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@bucket = args[:bucket] if args.key?(:bucket)
@generation = args[:generation] if args.key?(:generation)
@object = args[:object] if args.key?(:object)
end
end
# Start and end times for a build execution phase.
class TimeSpan
include Google::Apis::Core::Hashable
# End of time span.
# Corresponds to the JSON property `endTime`
# @return [String]
attr_accessor :end_time
# Start of time span.
# Corresponds to the JSON property `startTime`
# @return [String]
attr_accessor :start_time
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@end_time = args[:end_time] if args.key?(:end_time)
@start_time = args[:start_time] if args.key?(:start_time)
end
end
# Volume describes a Docker container volume which is mounted into build steps
# in order to persist files across build step execution.
class Volume
include Google::Apis::Core::Hashable
# Name of the volume to mount. Volume names must be unique per build step and
# must be valid names for Docker volumes. Each named volume must be used by at
# least two build steps.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# Path at which to mount the volume. Paths must be absolute and cannot conflict
# with other volume paths on the same build step or with certain reserved volume
# paths.
# Corresponds to the JSON property `path`
# @return [String]
attr_accessor :path
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@name = args[:name] if args.key?(:name)
@path = args[:path] if args.key?(:path)
end
end
end
end
end