google-api-ruby-client/google-api-client/generated/google/apis/sheets_v4/classes.rb

11294 lines
541 KiB
Ruby

# Copyright 2015 Google Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
require 'date'
require 'google/apis/core/base_service'
require 'google/apis/core/json_representation'
require 'google/apis/core/hashable'
require 'google/apis/errors'
module Google
module Apis
module SheetsV4
# Adds a new banded range to the spreadsheet.
class AddBandingRequest
include Google::Apis::Core::Hashable
# A banded (alternating colors) range in a sheet.
# Corresponds to the JSON property `bandedRange`
# @return [Google::Apis::SheetsV4::BandedRange]
attr_accessor :banded_range
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@banded_range = args[:banded_range] if args.key?(:banded_range)
end
end
# The result of adding a banded range.
class AddBandingResponse
include Google::Apis::Core::Hashable
# A banded (alternating colors) range in a sheet.
# Corresponds to the JSON property `bandedRange`
# @return [Google::Apis::SheetsV4::BandedRange]
attr_accessor :banded_range
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@banded_range = args[:banded_range] if args.key?(:banded_range)
end
end
# Adds a chart to a sheet in the spreadsheet.
class AddChartRequest
include Google::Apis::Core::Hashable
# A chart embedded in a sheet.
# Corresponds to the JSON property `chart`
# @return [Google::Apis::SheetsV4::EmbeddedChart]
attr_accessor :chart
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@chart = args[:chart] if args.key?(:chart)
end
end
# The result of adding a chart to a spreadsheet.
class AddChartResponse
include Google::Apis::Core::Hashable
# A chart embedded in a sheet.
# Corresponds to the JSON property `chart`
# @return [Google::Apis::SheetsV4::EmbeddedChart]
attr_accessor :chart
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@chart = args[:chart] if args.key?(:chart)
end
end
# Adds a new conditional format rule at the given index. All subsequent rules'
# indexes are incremented.
class AddConditionalFormatRuleRequest
include Google::Apis::Core::Hashable
# The zero-based index where the rule should be inserted.
# Corresponds to the JSON property `index`
# @return [Fixnum]
attr_accessor :index
# A rule describing a conditional format.
# Corresponds to the JSON property `rule`
# @return [Google::Apis::SheetsV4::ConditionalFormatRule]
attr_accessor :rule
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@index = args[:index] if args.key?(:index)
@rule = args[:rule] if args.key?(:rule)
end
end
# Adds a data source. After the data source is added successfully, an associated
# DATA_SOURCE sheet is created and an execution is triggered to refresh the
# sheet to read data from the data source. The request requires an additional `
# bigquery.readonly` OAuth scope.
class AddDataSourceRequest
include Google::Apis::Core::Hashable
# Information about an external data source in the spreadsheet.
# Corresponds to the JSON property `dataSource`
# @return [Google::Apis::SheetsV4::DataSource]
attr_accessor :data_source
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data_source = args[:data_source] if args.key?(:data_source)
end
end
# The result of adding a data source.
class AddDataSourceResponse
include Google::Apis::Core::Hashable
# The data execution status. A data execution is created to sync a data source
# object with the latest data from a DataSource. It is usually scheduled to run
# at background, you can check its state to tell if an execution completes There
# are several scenarios where a data execution is triggered to run: * Adding a
# data source creates an associated data source sheet as well as a data
# execution to sync the data from the data source to the sheet. * Updating a
# data source creates a data execution to refresh the associated data source
# sheet similarly. * You can send refresh request to explicitly refresh one or
# multiple data source objects.
# Corresponds to the JSON property `dataExecutionStatus`
# @return [Google::Apis::SheetsV4::DataExecutionStatus]
attr_accessor :data_execution_status
# Information about an external data source in the spreadsheet.
# Corresponds to the JSON property `dataSource`
# @return [Google::Apis::SheetsV4::DataSource]
attr_accessor :data_source
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data_execution_status = args[:data_execution_status] if args.key?(:data_execution_status)
@data_source = args[:data_source] if args.key?(:data_source)
end
end
# Creates a group over the specified range. If the requested range is a superset
# of the range of an existing group G, then the depth of G is incremented and
# this new group G' has the depth of that group. For example, a group [C:D,
# depth 1] + [B:E] results in groups [B:E, depth 1] and [C:D, depth 2]. If the
# requested range is a subset of the range of an existing group G, then the
# depth of the new group G' becomes one greater than the depth of G. For example,
# a group [B:E, depth 1] + [C:D] results in groups [B:E, depth 1] and [C:D,
# depth 2]. If the requested range starts before and ends within, or starts
# within and ends after, the range of an existing group G, then the range of the
# existing group G becomes the union of the ranges, and the new group G' has
# depth one greater than the depth of G and range as the intersection of the
# ranges. For example, a group [B:D, depth 1] + [C:E] results in groups [B:E,
# depth 1] and [C:D, depth 2].
class AddDimensionGroupRequest
include Google::Apis::Core::Hashable
# A range along a single dimension on a sheet. All indexes are zero-based.
# Indexes are half open: the start index is inclusive and the end index is
# exclusive. Missing indexes indicate the range is unbounded on that side.
# Corresponds to the JSON property `range`
# @return [Google::Apis::SheetsV4::DimensionRange]
attr_accessor :range
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@range = args[:range] if args.key?(:range)
end
end
# The result of adding a group.
class AddDimensionGroupResponse
include Google::Apis::Core::Hashable
# All groups of a dimension after adding a group to that dimension.
# Corresponds to the JSON property `dimensionGroups`
# @return [Array<Google::Apis::SheetsV4::DimensionGroup>]
attr_accessor :dimension_groups
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@dimension_groups = args[:dimension_groups] if args.key?(:dimension_groups)
end
end
# Adds a filter view.
class AddFilterViewRequest
include Google::Apis::Core::Hashable
# A filter view.
# Corresponds to the JSON property `filter`
# @return [Google::Apis::SheetsV4::FilterView]
attr_accessor :filter
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@filter = args[:filter] if args.key?(:filter)
end
end
# The result of adding a filter view.
class AddFilterViewResponse
include Google::Apis::Core::Hashable
# A filter view.
# Corresponds to the JSON property `filter`
# @return [Google::Apis::SheetsV4::FilterView]
attr_accessor :filter
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@filter = args[:filter] if args.key?(:filter)
end
end
# Adds a named range to the spreadsheet.
class AddNamedRangeRequest
include Google::Apis::Core::Hashable
# A named range.
# Corresponds to the JSON property `namedRange`
# @return [Google::Apis::SheetsV4::NamedRange]
attr_accessor :named_range
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@named_range = args[:named_range] if args.key?(:named_range)
end
end
# The result of adding a named range.
class AddNamedRangeResponse
include Google::Apis::Core::Hashable
# A named range.
# Corresponds to the JSON property `namedRange`
# @return [Google::Apis::SheetsV4::NamedRange]
attr_accessor :named_range
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@named_range = args[:named_range] if args.key?(:named_range)
end
end
# Adds a new protected range.
class AddProtectedRangeRequest
include Google::Apis::Core::Hashable
# A protected range.
# Corresponds to the JSON property `protectedRange`
# @return [Google::Apis::SheetsV4::ProtectedRange]
attr_accessor :protected_range
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@protected_range = args[:protected_range] if args.key?(:protected_range)
end
end
# The result of adding a new protected range.
class AddProtectedRangeResponse
include Google::Apis::Core::Hashable
# A protected range.
# Corresponds to the JSON property `protectedRange`
# @return [Google::Apis::SheetsV4::ProtectedRange]
attr_accessor :protected_range
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@protected_range = args[:protected_range] if args.key?(:protected_range)
end
end
# Adds a new sheet. When a sheet is added at a given index, all subsequent
# sheets' indexes are incremented. To add an object sheet, use AddChartRequest
# instead and specify EmbeddedObjectPosition.sheetId or EmbeddedObjectPosition.
# newSheet.
class AddSheetRequest
include Google::Apis::Core::Hashable
# Properties of a sheet.
# Corresponds to the JSON property `properties`
# @return [Google::Apis::SheetsV4::SheetProperties]
attr_accessor :properties
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@properties = args[:properties] if args.key?(:properties)
end
end
# The result of adding a sheet.
class AddSheetResponse
include Google::Apis::Core::Hashable
# Properties of a sheet.
# Corresponds to the JSON property `properties`
# @return [Google::Apis::SheetsV4::SheetProperties]
attr_accessor :properties
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@properties = args[:properties] if args.key?(:properties)
end
end
# Adds a slicer to a sheet in the spreadsheet.
class AddSlicerRequest
include Google::Apis::Core::Hashable
# A slicer in a sheet.
# Corresponds to the JSON property `slicer`
# @return [Google::Apis::SheetsV4::Slicer]
attr_accessor :slicer
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@slicer = args[:slicer] if args.key?(:slicer)
end
end
# The result of adding a slicer to a spreadsheet.
class AddSlicerResponse
include Google::Apis::Core::Hashable
# A slicer in a sheet.
# Corresponds to the JSON property `slicer`
# @return [Google::Apis::SheetsV4::Slicer]
attr_accessor :slicer
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@slicer = args[:slicer] if args.key?(:slicer)
end
end
# Adds new cells after the last row with data in a sheet, inserting new rows
# into the sheet if necessary.
class AppendCellsRequest
include Google::Apis::Core::Hashable
# The fields of CellData that should be updated. At least one field must be
# specified. The root is the CellData; 'row.values.' should not be specified. A
# single `"*"` can be used as short-hand for listing every field.
# Corresponds to the JSON property `fields`
# @return [String]
attr_accessor :fields
# The data to append.
# Corresponds to the JSON property `rows`
# @return [Array<Google::Apis::SheetsV4::RowData>]
attr_accessor :rows
# The sheet ID to append the data to.
# Corresponds to the JSON property `sheetId`
# @return [Fixnum]
attr_accessor :sheet_id
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@fields = args[:fields] if args.key?(:fields)
@rows = args[:rows] if args.key?(:rows)
@sheet_id = args[:sheet_id] if args.key?(:sheet_id)
end
end
# Appends rows or columns to the end of a sheet.
class AppendDimensionRequest
include Google::Apis::Core::Hashable
# Whether rows or columns should be appended.
# Corresponds to the JSON property `dimension`
# @return [String]
attr_accessor :dimension
# The number of rows or columns to append.
# Corresponds to the JSON property `length`
# @return [Fixnum]
attr_accessor :length
# The sheet to append rows or columns to.
# Corresponds to the JSON property `sheetId`
# @return [Fixnum]
attr_accessor :sheet_id
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@dimension = args[:dimension] if args.key?(:dimension)
@length = args[:length] if args.key?(:length)
@sheet_id = args[:sheet_id] if args.key?(:sheet_id)
end
end
# The response when updating a range of values in a spreadsheet.
class AppendValuesResponse
include Google::Apis::Core::Hashable
# The spreadsheet the updates were applied to.
# Corresponds to the JSON property `spreadsheetId`
# @return [String]
attr_accessor :spreadsheet_id
# The range (in A1 notation) of the table that values are being appended to (
# before the values were appended). Empty if no table was found.
# Corresponds to the JSON property `tableRange`
# @return [String]
attr_accessor :table_range
# The response when updating a range of values in a spreadsheet.
# Corresponds to the JSON property `updates`
# @return [Google::Apis::SheetsV4::UpdateValuesResponse]
attr_accessor :updates
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@spreadsheet_id = args[:spreadsheet_id] if args.key?(:spreadsheet_id)
@table_range = args[:table_range] if args.key?(:table_range)
@updates = args[:updates] if args.key?(:updates)
end
end
# Fills in more data based on existing data.
class AutoFillRequest
include Google::Apis::Core::Hashable
# A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
# the start index is inclusive and the end index is exclusive -- [start_index,
# end_index). Missing indexes indicate the range is unbounded on that side. For
# example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
# start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
# 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
# start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
# start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
# start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
# sheet_id:0` The start index must always be less than or equal to the end index.
# If the start index equals the end index, then the range is empty. Empty
# ranges are typically not meaningful and are usually rendered in the UI as `#
# REF!`.
# Corresponds to the JSON property `range`
# @return [Google::Apis::SheetsV4::GridRange]
attr_accessor :range
# A combination of a source range and how to extend that source.
# Corresponds to the JSON property `sourceAndDestination`
# @return [Google::Apis::SheetsV4::SourceAndDestination]
attr_accessor :source_and_destination
# True if we should generate data with the "alternate" series. This differs
# based on the type and amount of source data.
# Corresponds to the JSON property `useAlternateSeries`
# @return [Boolean]
attr_accessor :use_alternate_series
alias_method :use_alternate_series?, :use_alternate_series
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@range = args[:range] if args.key?(:range)
@source_and_destination = args[:source_and_destination] if args.key?(:source_and_destination)
@use_alternate_series = args[:use_alternate_series] if args.key?(:use_alternate_series)
end
end
# Automatically resizes one or more dimensions based on the contents of the
# cells in that dimension.
class AutoResizeDimensionsRequest
include Google::Apis::Core::Hashable
# A range along a single dimension on a DATA_SOURCE sheet.
# Corresponds to the JSON property `dataSourceSheetDimensions`
# @return [Google::Apis::SheetsV4::DataSourceSheetDimensionRange]
attr_accessor :data_source_sheet_dimensions
# A range along a single dimension on a sheet. All indexes are zero-based.
# Indexes are half open: the start index is inclusive and the end index is
# exclusive. Missing indexes indicate the range is unbounded on that side.
# Corresponds to the JSON property `dimensions`
# @return [Google::Apis::SheetsV4::DimensionRange]
attr_accessor :dimensions
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data_source_sheet_dimensions = args[:data_source_sheet_dimensions] if args.key?(:data_source_sheet_dimensions)
@dimensions = args[:dimensions] if args.key?(:dimensions)
end
end
# A banded (alternating colors) range in a sheet.
class BandedRange
include Google::Apis::Core::Hashable
# The id of the banded range.
# Corresponds to the JSON property `bandedRangeId`
# @return [Fixnum]
attr_accessor :banded_range_id
# Properties referring a single dimension (either row or column). If both
# BandedRange.row_properties and BandedRange.column_properties are set, the fill
# colors are applied to cells according to the following rules: * header_color
# and footer_color take priority over band colors. * first_band_color takes
# priority over second_band_color. * row_properties takes priority over
# column_properties. For example, the first row color takes priority over the
# first column color, but the first column color takes priority over the second
# row color. Similarly, the row header takes priority over the column header in
# the top left cell, but the column header takes priority over the first row
# color if the row header is not set.
# Corresponds to the JSON property `columnProperties`
# @return [Google::Apis::SheetsV4::BandingProperties]
attr_accessor :column_properties
# A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
# the start index is inclusive and the end index is exclusive -- [start_index,
# end_index). Missing indexes indicate the range is unbounded on that side. For
# example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
# start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
# 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
# start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
# start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
# start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
# sheet_id:0` The start index must always be less than or equal to the end index.
# If the start index equals the end index, then the range is empty. Empty
# ranges are typically not meaningful and are usually rendered in the UI as `#
# REF!`.
# Corresponds to the JSON property `range`
# @return [Google::Apis::SheetsV4::GridRange]
attr_accessor :range
# Properties referring a single dimension (either row or column). If both
# BandedRange.row_properties and BandedRange.column_properties are set, the fill
# colors are applied to cells according to the following rules: * header_color
# and footer_color take priority over band colors. * first_band_color takes
# priority over second_band_color. * row_properties takes priority over
# column_properties. For example, the first row color takes priority over the
# first column color, but the first column color takes priority over the second
# row color. Similarly, the row header takes priority over the column header in
# the top left cell, but the column header takes priority over the first row
# color if the row header is not set.
# Corresponds to the JSON property `rowProperties`
# @return [Google::Apis::SheetsV4::BandingProperties]
attr_accessor :row_properties
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@banded_range_id = args[:banded_range_id] if args.key?(:banded_range_id)
@column_properties = args[:column_properties] if args.key?(:column_properties)
@range = args[:range] if args.key?(:range)
@row_properties = args[:row_properties] if args.key?(:row_properties)
end
end
# Properties referring a single dimension (either row or column). If both
# BandedRange.row_properties and BandedRange.column_properties are set, the fill
# colors are applied to cells according to the following rules: * header_color
# and footer_color take priority over band colors. * first_band_color takes
# priority over second_band_color. * row_properties takes priority over
# column_properties. For example, the first row color takes priority over the
# first column color, but the first column color takes priority over the second
# row color. Similarly, the row header takes priority over the column header in
# the top left cell, but the column header takes priority over the first row
# color if the row header is not set.
class BandingProperties
include Google::Apis::Core::Hashable
# Represents a color in the RGBA color space. This representation is designed
# for simplicity of conversion to/from color representations in various
# languages over compactness; for example, the fields of this representation can
# be trivially provided to the constructor of "java.awt.Color" in Java; it can
# also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
# method in iOS; and, with just a little work, it can be easily formatted into a
# CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
# information about the absolute color space that should be used to interpret
# the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
# applications SHOULD assume the sRGB color space. Note: when color equality
# needs to be decided, implementations, unless documented otherwise, will treat
# two colors to be equal if all their red, green, blue and alpha values each
# differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
# public static java.awt.Color fromProto(Color protocolor) ` float alpha =
# protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
# java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
# ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
# float) color.getRed(); float green = (float) color.getGreen(); float blue = (
# float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
# = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
# .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
# ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
# denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
# Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
# protocolor red]; float green = [protocolor green]; float blue = [protocolor
# blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
# alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
# colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
# UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
# green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
# alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
# blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
# [result autorelease]; return result; ` // ... Example (JavaScript): // ...
# var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
# var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
# var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
# var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
# rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
# 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
# ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
# ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
# hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
# var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
# resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
# join(''); `; // ...
# Corresponds to the JSON property `firstBandColor`
# @return [Google::Apis::SheetsV4::Color]
attr_accessor :first_band_color
# A color value.
# Corresponds to the JSON property `firstBandColorStyle`
# @return [Google::Apis::SheetsV4::ColorStyle]
attr_accessor :first_band_color_style
# Represents a color in the RGBA color space. This representation is designed
# for simplicity of conversion to/from color representations in various
# languages over compactness; for example, the fields of this representation can
# be trivially provided to the constructor of "java.awt.Color" in Java; it can
# also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
# method in iOS; and, with just a little work, it can be easily formatted into a
# CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
# information about the absolute color space that should be used to interpret
# the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
# applications SHOULD assume the sRGB color space. Note: when color equality
# needs to be decided, implementations, unless documented otherwise, will treat
# two colors to be equal if all their red, green, blue and alpha values each
# differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
# public static java.awt.Color fromProto(Color protocolor) ` float alpha =
# protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
# java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
# ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
# float) color.getRed(); float green = (float) color.getGreen(); float blue = (
# float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
# = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
# .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
# ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
# denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
# Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
# protocolor red]; float green = [protocolor green]; float blue = [protocolor
# blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
# alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
# colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
# UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
# green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
# alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
# blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
# [result autorelease]; return result; ` // ... Example (JavaScript): // ...
# var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
# var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
# var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
# var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
# rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
# 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
# ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
# ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
# hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
# var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
# resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
# join(''); `; // ...
# Corresponds to the JSON property `footerColor`
# @return [Google::Apis::SheetsV4::Color]
attr_accessor :footer_color
# A color value.
# Corresponds to the JSON property `footerColorStyle`
# @return [Google::Apis::SheetsV4::ColorStyle]
attr_accessor :footer_color_style
# Represents a color in the RGBA color space. This representation is designed
# for simplicity of conversion to/from color representations in various
# languages over compactness; for example, the fields of this representation can
# be trivially provided to the constructor of "java.awt.Color" in Java; it can
# also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
# method in iOS; and, with just a little work, it can be easily formatted into a
# CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
# information about the absolute color space that should be used to interpret
# the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
# applications SHOULD assume the sRGB color space. Note: when color equality
# needs to be decided, implementations, unless documented otherwise, will treat
# two colors to be equal if all their red, green, blue and alpha values each
# differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
# public static java.awt.Color fromProto(Color protocolor) ` float alpha =
# protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
# java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
# ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
# float) color.getRed(); float green = (float) color.getGreen(); float blue = (
# float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
# = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
# .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
# ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
# denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
# Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
# protocolor red]; float green = [protocolor green]; float blue = [protocolor
# blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
# alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
# colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
# UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
# green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
# alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
# blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
# [result autorelease]; return result; ` // ... Example (JavaScript): // ...
# var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
# var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
# var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
# var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
# rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
# 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
# ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
# ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
# hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
# var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
# resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
# join(''); `; // ...
# Corresponds to the JSON property `headerColor`
# @return [Google::Apis::SheetsV4::Color]
attr_accessor :header_color
# A color value.
# Corresponds to the JSON property `headerColorStyle`
# @return [Google::Apis::SheetsV4::ColorStyle]
attr_accessor :header_color_style
# Represents a color in the RGBA color space. This representation is designed
# for simplicity of conversion to/from color representations in various
# languages over compactness; for example, the fields of this representation can
# be trivially provided to the constructor of "java.awt.Color" in Java; it can
# also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
# method in iOS; and, with just a little work, it can be easily formatted into a
# CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
# information about the absolute color space that should be used to interpret
# the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
# applications SHOULD assume the sRGB color space. Note: when color equality
# needs to be decided, implementations, unless documented otherwise, will treat
# two colors to be equal if all their red, green, blue and alpha values each
# differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
# public static java.awt.Color fromProto(Color protocolor) ` float alpha =
# protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
# java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
# ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
# float) color.getRed(); float green = (float) color.getGreen(); float blue = (
# float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
# = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
# .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
# ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
# denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
# Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
# protocolor red]; float green = [protocolor green]; float blue = [protocolor
# blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
# alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
# colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
# UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
# green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
# alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
# blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
# [result autorelease]; return result; ` // ... Example (JavaScript): // ...
# var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
# var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
# var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
# var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
# rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
# 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
# ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
# ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
# hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
# var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
# resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
# join(''); `; // ...
# Corresponds to the JSON property `secondBandColor`
# @return [Google::Apis::SheetsV4::Color]
attr_accessor :second_band_color
# A color value.
# Corresponds to the JSON property `secondBandColorStyle`
# @return [Google::Apis::SheetsV4::ColorStyle]
attr_accessor :second_band_color_style
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@first_band_color = args[:first_band_color] if args.key?(:first_band_color)
@first_band_color_style = args[:first_band_color_style] if args.key?(:first_band_color_style)
@footer_color = args[:footer_color] if args.key?(:footer_color)
@footer_color_style = args[:footer_color_style] if args.key?(:footer_color_style)
@header_color = args[:header_color] if args.key?(:header_color)
@header_color_style = args[:header_color_style] if args.key?(:header_color_style)
@second_band_color = args[:second_band_color] if args.key?(:second_band_color)
@second_band_color_style = args[:second_band_color_style] if args.key?(:second_band_color_style)
end
end
# Formatting options for baseline value.
class BaselineValueFormat
include Google::Apis::Core::Hashable
# The comparison type of key value with baseline value.
# Corresponds to the JSON property `comparisonType`
# @return [String]
attr_accessor :comparison_type
# Description which is appended after the baseline value. This field is optional.
# Corresponds to the JSON property `description`
# @return [String]
attr_accessor :description
# Represents a color in the RGBA color space. This representation is designed
# for simplicity of conversion to/from color representations in various
# languages over compactness; for example, the fields of this representation can
# be trivially provided to the constructor of "java.awt.Color" in Java; it can
# also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
# method in iOS; and, with just a little work, it can be easily formatted into a
# CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
# information about the absolute color space that should be used to interpret
# the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
# applications SHOULD assume the sRGB color space. Note: when color equality
# needs to be decided, implementations, unless documented otherwise, will treat
# two colors to be equal if all their red, green, blue and alpha values each
# differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
# public static java.awt.Color fromProto(Color protocolor) ` float alpha =
# protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
# java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
# ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
# float) color.getRed(); float green = (float) color.getGreen(); float blue = (
# float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
# = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
# .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
# ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
# denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
# Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
# protocolor red]; float green = [protocolor green]; float blue = [protocolor
# blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
# alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
# colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
# UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
# green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
# alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
# blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
# [result autorelease]; return result; ` // ... Example (JavaScript): // ...
# var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
# var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
# var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
# var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
# rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
# 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
# ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
# ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
# hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
# var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
# resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
# join(''); `; // ...
# Corresponds to the JSON property `negativeColor`
# @return [Google::Apis::SheetsV4::Color]
attr_accessor :negative_color
# A color value.
# Corresponds to the JSON property `negativeColorStyle`
# @return [Google::Apis::SheetsV4::ColorStyle]
attr_accessor :negative_color_style
# Position settings for text.
# Corresponds to the JSON property `position`
# @return [Google::Apis::SheetsV4::TextPosition]
attr_accessor :position
# Represents a color in the RGBA color space. This representation is designed
# for simplicity of conversion to/from color representations in various
# languages over compactness; for example, the fields of this representation can
# be trivially provided to the constructor of "java.awt.Color" in Java; it can
# also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
# method in iOS; and, with just a little work, it can be easily formatted into a
# CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
# information about the absolute color space that should be used to interpret
# the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
# applications SHOULD assume the sRGB color space. Note: when color equality
# needs to be decided, implementations, unless documented otherwise, will treat
# two colors to be equal if all their red, green, blue and alpha values each
# differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
# public static java.awt.Color fromProto(Color protocolor) ` float alpha =
# protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
# java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
# ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
# float) color.getRed(); float green = (float) color.getGreen(); float blue = (
# float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
# = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
# .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
# ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
# denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
# Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
# protocolor red]; float green = [protocolor green]; float blue = [protocolor
# blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
# alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
# colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
# UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
# green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
# alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
# blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
# [result autorelease]; return result; ` // ... Example (JavaScript): // ...
# var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
# var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
# var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
# var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
# rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
# 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
# ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
# ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
# hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
# var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
# resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
# join(''); `; // ...
# Corresponds to the JSON property `positiveColor`
# @return [Google::Apis::SheetsV4::Color]
attr_accessor :positive_color
# A color value.
# Corresponds to the JSON property `positiveColorStyle`
# @return [Google::Apis::SheetsV4::ColorStyle]
attr_accessor :positive_color_style
# The format of a run of text in a cell. Absent values indicate that the field
# isn't specified.
# Corresponds to the JSON property `textFormat`
# @return [Google::Apis::SheetsV4::TextFormat]
attr_accessor :text_format
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@comparison_type = args[:comparison_type] if args.key?(:comparison_type)
@description = args[:description] if args.key?(:description)
@negative_color = args[:negative_color] if args.key?(:negative_color)
@negative_color_style = args[:negative_color_style] if args.key?(:negative_color_style)
@position = args[:position] if args.key?(:position)
@positive_color = args[:positive_color] if args.key?(:positive_color)
@positive_color_style = args[:positive_color_style] if args.key?(:positive_color_style)
@text_format = args[:text_format] if args.key?(:text_format)
end
end
# An axis of the chart. A chart may not have more than one axis per axis
# position.
class BasicChartAxis
include Google::Apis::Core::Hashable
# The format of a run of text in a cell. Absent values indicate that the field
# isn't specified.
# Corresponds to the JSON property `format`
# @return [Google::Apis::SheetsV4::TextFormat]
attr_accessor :format
# The position of this axis.
# Corresponds to the JSON property `position`
# @return [String]
attr_accessor :position
# The title of this axis. If set, this overrides any title inferred from headers
# of the data.
# Corresponds to the JSON property `title`
# @return [String]
attr_accessor :title
# Position settings for text.
# Corresponds to the JSON property `titleTextPosition`
# @return [Google::Apis::SheetsV4::TextPosition]
attr_accessor :title_text_position
# The options that define a "view window" for a chart (such as the visible
# values in an axis).
# Corresponds to the JSON property `viewWindowOptions`
# @return [Google::Apis::SheetsV4::ChartAxisViewWindowOptions]
attr_accessor :view_window_options
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@format = args[:format] if args.key?(:format)
@position = args[:position] if args.key?(:position)
@title = args[:title] if args.key?(:title)
@title_text_position = args[:title_text_position] if args.key?(:title_text_position)
@view_window_options = args[:view_window_options] if args.key?(:view_window_options)
end
end
# The domain of a chart. For example, if charting stock prices over time, this
# would be the date.
class BasicChartDomain
include Google::Apis::Core::Hashable
# The data included in a domain or series.
# Corresponds to the JSON property `domain`
# @return [Google::Apis::SheetsV4::ChartData]
attr_accessor :domain
# True to reverse the order of the domain values (horizontal axis).
# Corresponds to the JSON property `reversed`
# @return [Boolean]
attr_accessor :reversed
alias_method :reversed?, :reversed
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@domain = args[:domain] if args.key?(:domain)
@reversed = args[:reversed] if args.key?(:reversed)
end
end
# A single series of data in a chart. For example, if charting stock prices over
# time, multiple series may exist, one for the "Open Price", "High Price", "Low
# Price" and "Close Price".
class BasicChartSeries
include Google::Apis::Core::Hashable
# Represents a color in the RGBA color space. This representation is designed
# for simplicity of conversion to/from color representations in various
# languages over compactness; for example, the fields of this representation can
# be trivially provided to the constructor of "java.awt.Color" in Java; it can
# also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
# method in iOS; and, with just a little work, it can be easily formatted into a
# CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
# information about the absolute color space that should be used to interpret
# the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
# applications SHOULD assume the sRGB color space. Note: when color equality
# needs to be decided, implementations, unless documented otherwise, will treat
# two colors to be equal if all their red, green, blue and alpha values each
# differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
# public static java.awt.Color fromProto(Color protocolor) ` float alpha =
# protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
# java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
# ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
# float) color.getRed(); float green = (float) color.getGreen(); float blue = (
# float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
# = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
# .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
# ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
# denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
# Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
# protocolor red]; float green = [protocolor green]; float blue = [protocolor
# blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
# alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
# colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
# UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
# green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
# alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
# blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
# [result autorelease]; return result; ` // ... Example (JavaScript): // ...
# var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
# var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
# var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
# var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
# rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
# 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
# ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
# ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
# hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
# var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
# resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
# join(''); `; // ...
# Corresponds to the JSON property `color`
# @return [Google::Apis::SheetsV4::Color]
attr_accessor :color
# A color value.
# Corresponds to the JSON property `colorStyle`
# @return [Google::Apis::SheetsV4::ColorStyle]
attr_accessor :color_style
# Settings for one set of data labels. Data labels are annotations that appear
# next to a set of data, such as the points on a line chart, and provide
# additional information about what the data represents, such as a text
# representation of the value behind that point on the graph.
# Corresponds to the JSON property `dataLabel`
# @return [Google::Apis::SheetsV4::DataLabel]
attr_accessor :data_label
# Properties that describe the style of a line.
# Corresponds to the JSON property `lineStyle`
# @return [Google::Apis::SheetsV4::LineStyle]
attr_accessor :line_style
# The style of a point on the chart.
# Corresponds to the JSON property `pointStyle`
# @return [Google::Apis::SheetsV4::PointStyle]
attr_accessor :point_style
# The data included in a domain or series.
# Corresponds to the JSON property `series`
# @return [Google::Apis::SheetsV4::ChartData]
attr_accessor :series
# Style override settings for series data points.
# Corresponds to the JSON property `styleOverrides`
# @return [Array<Google::Apis::SheetsV4::BasicSeriesDataPointStyleOverride>]
attr_accessor :style_overrides
# The minor axis that will specify the range of values for this series. For
# example, if charting stocks over time, the "Volume" series may want to be
# pinned to the right with the prices pinned to the left, because the scale of
# trading volume is different than the scale of prices. It is an error to
# specify an axis that isn't a valid minor axis for the chart's type.
# Corresponds to the JSON property `targetAxis`
# @return [String]
attr_accessor :target_axis
# The type of this series. Valid only if the chartType is COMBO. Different types
# will change the way the series is visualized. Only LINE, AREA, and COLUMN are
# supported.
# Corresponds to the JSON property `type`
# @return [String]
attr_accessor :type
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@color = args[:color] if args.key?(:color)
@color_style = args[:color_style] if args.key?(:color_style)
@data_label = args[:data_label] if args.key?(:data_label)
@line_style = args[:line_style] if args.key?(:line_style)
@point_style = args[:point_style] if args.key?(:point_style)
@series = args[:series] if args.key?(:series)
@style_overrides = args[:style_overrides] if args.key?(:style_overrides)
@target_axis = args[:target_axis] if args.key?(:target_axis)
@type = args[:type] if args.key?(:type)
end
end
# The specification for a basic chart. See BasicChartType for the list of charts
# this supports.
class BasicChartSpec
include Google::Apis::Core::Hashable
# The axis on the chart.
# Corresponds to the JSON property `axis`
# @return [Array<Google::Apis::SheetsV4::BasicChartAxis>]
attr_accessor :axis
# The type of the chart.
# Corresponds to the JSON property `chartType`
# @return [String]
attr_accessor :chart_type
# The behavior of tooltips and data highlighting when hovering on data and chart
# area.
# Corresponds to the JSON property `compareMode`
# @return [String]
attr_accessor :compare_mode
# The domain of data this is charting. Only a single domain is supported.
# Corresponds to the JSON property `domains`
# @return [Array<Google::Apis::SheetsV4::BasicChartDomain>]
attr_accessor :domains
# The number of rows or columns in the data that are "headers". If not set,
# Google Sheets will guess how many rows are headers based on the data. (Note
# that BasicChartAxis.title may override the axis title inferred from the header
# values.)
# Corresponds to the JSON property `headerCount`
# @return [Fixnum]
attr_accessor :header_count
# If some values in a series are missing, gaps may appear in the chart (e.g,
# segments of lines in a line chart will be missing). To eliminate these gaps
# set this to true. Applies to Line, Area, and Combo charts.
# Corresponds to the JSON property `interpolateNulls`
# @return [Boolean]
attr_accessor :interpolate_nulls
alias_method :interpolate_nulls?, :interpolate_nulls
# The position of the chart legend.
# Corresponds to the JSON property `legendPosition`
# @return [String]
attr_accessor :legend_position
# Gets whether all lines should be rendered smooth or straight by default.
# Applies to Line charts.
# Corresponds to the JSON property `lineSmoothing`
# @return [Boolean]
attr_accessor :line_smoothing
alias_method :line_smoothing?, :line_smoothing
# The data this chart is visualizing.
# Corresponds to the JSON property `series`
# @return [Array<Google::Apis::SheetsV4::BasicChartSeries>]
attr_accessor :series
# The stacked type for charts that support vertical stacking. Applies to Area,
# Bar, Column, Combo, and Stepped Area charts.
# Corresponds to the JSON property `stackedType`
# @return [String]
attr_accessor :stacked_type
# True to make the chart 3D. Applies to Bar and Column charts.
# Corresponds to the JSON property `threeDimensional`
# @return [Boolean]
attr_accessor :three_dimensional
alias_method :three_dimensional?, :three_dimensional
# Settings for one set of data labels. Data labels are annotations that appear
# next to a set of data, such as the points on a line chart, and provide
# additional information about what the data represents, such as a text
# representation of the value behind that point on the graph.
# Corresponds to the JSON property `totalDataLabel`
# @return [Google::Apis::SheetsV4::DataLabel]
attr_accessor :total_data_label
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@axis = args[:axis] if args.key?(:axis)
@chart_type = args[:chart_type] if args.key?(:chart_type)
@compare_mode = args[:compare_mode] if args.key?(:compare_mode)
@domains = args[:domains] if args.key?(:domains)
@header_count = args[:header_count] if args.key?(:header_count)
@interpolate_nulls = args[:interpolate_nulls] if args.key?(:interpolate_nulls)
@legend_position = args[:legend_position] if args.key?(:legend_position)
@line_smoothing = args[:line_smoothing] if args.key?(:line_smoothing)
@series = args[:series] if args.key?(:series)
@stacked_type = args[:stacked_type] if args.key?(:stacked_type)
@three_dimensional = args[:three_dimensional] if args.key?(:three_dimensional)
@total_data_label = args[:total_data_label] if args.key?(:total_data_label)
end
end
# The default filter associated with a sheet.
class BasicFilter
include Google::Apis::Core::Hashable
# The criteria for showing/hiding values per column. The map's key is the column
# index, and the value is the criteria for that column. This field is deprecated
# in favor of filter_specs.
# Corresponds to the JSON property `criteria`
# @return [Hash<String,Google::Apis::SheetsV4::FilterCriteria>]
attr_accessor :criteria
# The filter criteria per column. Both criteria and filter_specs are populated
# in responses. If both fields are specified in an update request, this field
# takes precedence.
# Corresponds to the JSON property `filterSpecs`
# @return [Array<Google::Apis::SheetsV4::FilterSpec>]
attr_accessor :filter_specs
# A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
# the start index is inclusive and the end index is exclusive -- [start_index,
# end_index). Missing indexes indicate the range is unbounded on that side. For
# example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
# start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
# 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
# start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
# start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
# start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
# sheet_id:0` The start index must always be less than or equal to the end index.
# If the start index equals the end index, then the range is empty. Empty
# ranges are typically not meaningful and are usually rendered in the UI as `#
# REF!`.
# Corresponds to the JSON property `range`
# @return [Google::Apis::SheetsV4::GridRange]
attr_accessor :range
# The sort order per column. Later specifications are used when values are equal
# in the earlier specifications.
# Corresponds to the JSON property `sortSpecs`
# @return [Array<Google::Apis::SheetsV4::SortSpec>]
attr_accessor :sort_specs
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@criteria = args[:criteria] if args.key?(:criteria)
@filter_specs = args[:filter_specs] if args.key?(:filter_specs)
@range = args[:range] if args.key?(:range)
@sort_specs = args[:sort_specs] if args.key?(:sort_specs)
end
end
# Style override settings for a single series data point.
class BasicSeriesDataPointStyleOverride
include Google::Apis::Core::Hashable
# Represents a color in the RGBA color space. This representation is designed
# for simplicity of conversion to/from color representations in various
# languages over compactness; for example, the fields of this representation can
# be trivially provided to the constructor of "java.awt.Color" in Java; it can
# also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
# method in iOS; and, with just a little work, it can be easily formatted into a
# CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
# information about the absolute color space that should be used to interpret
# the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
# applications SHOULD assume the sRGB color space. Note: when color equality
# needs to be decided, implementations, unless documented otherwise, will treat
# two colors to be equal if all their red, green, blue and alpha values each
# differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
# public static java.awt.Color fromProto(Color protocolor) ` float alpha =
# protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
# java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
# ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
# float) color.getRed(); float green = (float) color.getGreen(); float blue = (
# float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
# = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
# .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
# ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
# denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
# Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
# protocolor red]; float green = [protocolor green]; float blue = [protocolor
# blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
# alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
# colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
# UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
# green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
# alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
# blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
# [result autorelease]; return result; ` // ... Example (JavaScript): // ...
# var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
# var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
# var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
# var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
# rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
# 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
# ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
# ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
# hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
# var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
# resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
# join(''); `; // ...
# Corresponds to the JSON property `color`
# @return [Google::Apis::SheetsV4::Color]
attr_accessor :color
# A color value.
# Corresponds to the JSON property `colorStyle`
# @return [Google::Apis::SheetsV4::ColorStyle]
attr_accessor :color_style
# Zero based index of the series data point.
# Corresponds to the JSON property `index`
# @return [Fixnum]
attr_accessor :index
# The style of a point on the chart.
# Corresponds to the JSON property `pointStyle`
# @return [Google::Apis::SheetsV4::PointStyle]
attr_accessor :point_style
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@color = args[:color] if args.key?(:color)
@color_style = args[:color_style] if args.key?(:color_style)
@index = args[:index] if args.key?(:index)
@point_style = args[:point_style] if args.key?(:point_style)
end
end
# The request for clearing more than one range selected by a DataFilter in a
# spreadsheet.
class BatchClearValuesByDataFilterRequest
include Google::Apis::Core::Hashable
# The DataFilters used to determine which ranges to clear.
# Corresponds to the JSON property `dataFilters`
# @return [Array<Google::Apis::SheetsV4::DataFilter>]
attr_accessor :data_filters
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data_filters = args[:data_filters] if args.key?(:data_filters)
end
end
# The response when clearing a range of values selected with DataFilters in a
# spreadsheet.
class BatchClearValuesByDataFilterResponse
include Google::Apis::Core::Hashable
# The ranges that were cleared, in A1 notation. If the requests are for an
# unbounded range or a ranger larger than the bounds of the sheet, this is the
# actual ranges that were cleared, bounded to the sheet's limits.
# Corresponds to the JSON property `clearedRanges`
# @return [Array<String>]
attr_accessor :cleared_ranges
# The spreadsheet the updates were applied to.
# Corresponds to the JSON property `spreadsheetId`
# @return [String]
attr_accessor :spreadsheet_id
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@cleared_ranges = args[:cleared_ranges] if args.key?(:cleared_ranges)
@spreadsheet_id = args[:spreadsheet_id] if args.key?(:spreadsheet_id)
end
end
# The request for clearing more than one range of values in a spreadsheet.
class BatchClearValuesRequest
include Google::Apis::Core::Hashable
# The ranges to clear, in A1 notation.
# Corresponds to the JSON property `ranges`
# @return [Array<String>]
attr_accessor :ranges
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@ranges = args[:ranges] if args.key?(:ranges)
end
end
# The response when clearing a range of values in a spreadsheet.
class BatchClearValuesResponse
include Google::Apis::Core::Hashable
# The ranges that were cleared, in A1 notation. If the requests are for an
# unbounded range or a ranger larger than the bounds of the sheet, this is the
# actual ranges that were cleared, bounded to the sheet's limits.
# Corresponds to the JSON property `clearedRanges`
# @return [Array<String>]
attr_accessor :cleared_ranges
# The spreadsheet the updates were applied to.
# Corresponds to the JSON property `spreadsheetId`
# @return [String]
attr_accessor :spreadsheet_id
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@cleared_ranges = args[:cleared_ranges] if args.key?(:cleared_ranges)
@spreadsheet_id = args[:spreadsheet_id] if args.key?(:spreadsheet_id)
end
end
# The request for retrieving a range of values in a spreadsheet selected by a
# set of DataFilters.
class BatchGetValuesByDataFilterRequest
include Google::Apis::Core::Hashable
# The data filters used to match the ranges of values to retrieve. Ranges that
# match any of the specified data filters are included in the response.
# Corresponds to the JSON property `dataFilters`
# @return [Array<Google::Apis::SheetsV4::DataFilter>]
attr_accessor :data_filters
# How dates, times, and durations should be represented in the output. This is
# ignored if value_render_option is FORMATTED_VALUE. The default dateTime render
# option is [DateTimeRenderOption.SERIAL_NUMBER].
# Corresponds to the JSON property `dateTimeRenderOption`
# @return [String]
attr_accessor :date_time_render_option
# The major dimension that results should use. For example, if the spreadsheet
# data is: `A1=1,B1=2,A2=3,B2=4`, then a request that selects that range and
# sets `majorDimension=ROWS` returns `[[1,2],[3,4]]`, whereas a request that
# sets `majorDimension=COLUMNS` returns `[[1,3],[2,4]]`.
# Corresponds to the JSON property `majorDimension`
# @return [String]
attr_accessor :major_dimension
# How values should be represented in the output. The default render option is
# ValueRenderOption.FORMATTED_VALUE.
# Corresponds to the JSON property `valueRenderOption`
# @return [String]
attr_accessor :value_render_option
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data_filters = args[:data_filters] if args.key?(:data_filters)
@date_time_render_option = args[:date_time_render_option] if args.key?(:date_time_render_option)
@major_dimension = args[:major_dimension] if args.key?(:major_dimension)
@value_render_option = args[:value_render_option] if args.key?(:value_render_option)
end
end
# The response when retrieving more than one range of values in a spreadsheet
# selected by DataFilters.
class BatchGetValuesByDataFilterResponse
include Google::Apis::Core::Hashable
# The ID of the spreadsheet the data was retrieved from.
# Corresponds to the JSON property `spreadsheetId`
# @return [String]
attr_accessor :spreadsheet_id
# The requested values with the list of data filters that matched them.
# Corresponds to the JSON property `valueRanges`
# @return [Array<Google::Apis::SheetsV4::MatchedValueRange>]
attr_accessor :value_ranges
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@spreadsheet_id = args[:spreadsheet_id] if args.key?(:spreadsheet_id)
@value_ranges = args[:value_ranges] if args.key?(:value_ranges)
end
end
# The response when retrieving more than one range of values in a spreadsheet.
class BatchGetValuesResponse
include Google::Apis::Core::Hashable
# The ID of the spreadsheet the data was retrieved from.
# Corresponds to the JSON property `spreadsheetId`
# @return [String]
attr_accessor :spreadsheet_id
# The requested values. The order of the ValueRanges is the same as the order of
# the requested ranges.
# Corresponds to the JSON property `valueRanges`
# @return [Array<Google::Apis::SheetsV4::ValueRange>]
attr_accessor :value_ranges
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@spreadsheet_id = args[:spreadsheet_id] if args.key?(:spreadsheet_id)
@value_ranges = args[:value_ranges] if args.key?(:value_ranges)
end
end
# The request for updating any aspect of a spreadsheet.
class BatchUpdateSpreadsheetRequest
include Google::Apis::Core::Hashable
# Determines if the update response should include the spreadsheet resource.
# Corresponds to the JSON property `includeSpreadsheetInResponse`
# @return [Boolean]
attr_accessor :include_spreadsheet_in_response
alias_method :include_spreadsheet_in_response?, :include_spreadsheet_in_response
# A list of updates to apply to the spreadsheet. Requests will be applied in the
# order they are specified. If any request is not valid, no requests will be
# applied.
# Corresponds to the JSON property `requests`
# @return [Array<Google::Apis::SheetsV4::Request>]
attr_accessor :requests
# True if grid data should be returned. Meaningful only if
# include_spreadsheet_in_response is 'true'. This parameter is ignored if a
# field mask was set in the request.
# Corresponds to the JSON property `responseIncludeGridData`
# @return [Boolean]
attr_accessor :response_include_grid_data
alias_method :response_include_grid_data?, :response_include_grid_data
# Limits the ranges included in the response spreadsheet. Meaningful only if
# include_spreadsheet_in_response is 'true'.
# Corresponds to the JSON property `responseRanges`
# @return [Array<String>]
attr_accessor :response_ranges
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@include_spreadsheet_in_response = args[:include_spreadsheet_in_response] if args.key?(:include_spreadsheet_in_response)
@requests = args[:requests] if args.key?(:requests)
@response_include_grid_data = args[:response_include_grid_data] if args.key?(:response_include_grid_data)
@response_ranges = args[:response_ranges] if args.key?(:response_ranges)
end
end
# The reply for batch updating a spreadsheet.
class BatchUpdateSpreadsheetResponse
include Google::Apis::Core::Hashable
# The reply of the updates. This maps 1:1 with the updates, although replies to
# some requests may be empty.
# Corresponds to the JSON property `replies`
# @return [Array<Google::Apis::SheetsV4::Response>]
attr_accessor :replies
# The spreadsheet the updates were applied to.
# Corresponds to the JSON property `spreadsheetId`
# @return [String]
attr_accessor :spreadsheet_id
# Resource that represents a spreadsheet.
# Corresponds to the JSON property `updatedSpreadsheet`
# @return [Google::Apis::SheetsV4::Spreadsheet]
attr_accessor :updated_spreadsheet
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@replies = args[:replies] if args.key?(:replies)
@spreadsheet_id = args[:spreadsheet_id] if args.key?(:spreadsheet_id)
@updated_spreadsheet = args[:updated_spreadsheet] if args.key?(:updated_spreadsheet)
end
end
# The request for updating more than one range of values in a spreadsheet.
class BatchUpdateValuesByDataFilterRequest
include Google::Apis::Core::Hashable
# The new values to apply to the spreadsheet. If more than one range is matched
# by the specified DataFilter the specified values are applied to all of those
# ranges.
# Corresponds to the JSON property `data`
# @return [Array<Google::Apis::SheetsV4::DataFilterValueRange>]
attr_accessor :data
# Determines if the update response should include the values of the cells that
# were updated. By default, responses do not include the updated values. The `
# updatedData` field within each of the BatchUpdateValuesResponse.responses
# contains the updated values. If the range to write was larger than the range
# actually written, the response includes all values in the requested range (
# excluding trailing empty rows and columns).
# Corresponds to the JSON property `includeValuesInResponse`
# @return [Boolean]
attr_accessor :include_values_in_response
alias_method :include_values_in_response?, :include_values_in_response
# Determines how dates, times, and durations in the response should be rendered.
# This is ignored if response_value_render_option is FORMATTED_VALUE. The
# default dateTime render option is DateTimeRenderOption.SERIAL_NUMBER.
# Corresponds to the JSON property `responseDateTimeRenderOption`
# @return [String]
attr_accessor :response_date_time_render_option
# Determines how values in the response should be rendered. The default render
# option is ValueRenderOption.FORMATTED_VALUE.
# Corresponds to the JSON property `responseValueRenderOption`
# @return [String]
attr_accessor :response_value_render_option
# How the input data should be interpreted.
# Corresponds to the JSON property `valueInputOption`
# @return [String]
attr_accessor :value_input_option
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data = args[:data] if args.key?(:data)
@include_values_in_response = args[:include_values_in_response] if args.key?(:include_values_in_response)
@response_date_time_render_option = args[:response_date_time_render_option] if args.key?(:response_date_time_render_option)
@response_value_render_option = args[:response_value_render_option] if args.key?(:response_value_render_option)
@value_input_option = args[:value_input_option] if args.key?(:value_input_option)
end
end
# The response when updating a range of values in a spreadsheet.
class BatchUpdateValuesByDataFilterResponse
include Google::Apis::Core::Hashable
# The response for each range updated.
# Corresponds to the JSON property `responses`
# @return [Array<Google::Apis::SheetsV4::UpdateValuesByDataFilterResponse>]
attr_accessor :responses
# The spreadsheet the updates were applied to.
# Corresponds to the JSON property `spreadsheetId`
# @return [String]
attr_accessor :spreadsheet_id
# The total number of cells updated.
# Corresponds to the JSON property `totalUpdatedCells`
# @return [Fixnum]
attr_accessor :total_updated_cells
# The total number of columns where at least one cell in the column was updated.
# Corresponds to the JSON property `totalUpdatedColumns`
# @return [Fixnum]
attr_accessor :total_updated_columns
# The total number of rows where at least one cell in the row was updated.
# Corresponds to the JSON property `totalUpdatedRows`
# @return [Fixnum]
attr_accessor :total_updated_rows
# The total number of sheets where at least one cell in the sheet was updated.
# Corresponds to the JSON property `totalUpdatedSheets`
# @return [Fixnum]
attr_accessor :total_updated_sheets
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@responses = args[:responses] if args.key?(:responses)
@spreadsheet_id = args[:spreadsheet_id] if args.key?(:spreadsheet_id)
@total_updated_cells = args[:total_updated_cells] if args.key?(:total_updated_cells)
@total_updated_columns = args[:total_updated_columns] if args.key?(:total_updated_columns)
@total_updated_rows = args[:total_updated_rows] if args.key?(:total_updated_rows)
@total_updated_sheets = args[:total_updated_sheets] if args.key?(:total_updated_sheets)
end
end
# The request for updating more than one range of values in a spreadsheet.
class BatchUpdateValuesRequest
include Google::Apis::Core::Hashable
# The new values to apply to the spreadsheet.
# Corresponds to the JSON property `data`
# @return [Array<Google::Apis::SheetsV4::ValueRange>]
attr_accessor :data
# Determines if the update response should include the values of the cells that
# were updated. By default, responses do not include the updated values. The `
# updatedData` field within each of the BatchUpdateValuesResponse.responses
# contains the updated values. If the range to write was larger than the range
# actually written, the response includes all values in the requested range (
# excluding trailing empty rows and columns).
# Corresponds to the JSON property `includeValuesInResponse`
# @return [Boolean]
attr_accessor :include_values_in_response
alias_method :include_values_in_response?, :include_values_in_response
# Determines how dates, times, and durations in the response should be rendered.
# This is ignored if response_value_render_option is FORMATTED_VALUE. The
# default dateTime render option is DateTimeRenderOption.SERIAL_NUMBER.
# Corresponds to the JSON property `responseDateTimeRenderOption`
# @return [String]
attr_accessor :response_date_time_render_option
# Determines how values in the response should be rendered. The default render
# option is ValueRenderOption.FORMATTED_VALUE.
# Corresponds to the JSON property `responseValueRenderOption`
# @return [String]
attr_accessor :response_value_render_option
# How the input data should be interpreted.
# Corresponds to the JSON property `valueInputOption`
# @return [String]
attr_accessor :value_input_option
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data = args[:data] if args.key?(:data)
@include_values_in_response = args[:include_values_in_response] if args.key?(:include_values_in_response)
@response_date_time_render_option = args[:response_date_time_render_option] if args.key?(:response_date_time_render_option)
@response_value_render_option = args[:response_value_render_option] if args.key?(:response_value_render_option)
@value_input_option = args[:value_input_option] if args.key?(:value_input_option)
end
end
# The response when updating a range of values in a spreadsheet.
class BatchUpdateValuesResponse
include Google::Apis::Core::Hashable
# One UpdateValuesResponse per requested range, in the same order as the
# requests appeared.
# Corresponds to the JSON property `responses`
# @return [Array<Google::Apis::SheetsV4::UpdateValuesResponse>]
attr_accessor :responses
# The spreadsheet the updates were applied to.
# Corresponds to the JSON property `spreadsheetId`
# @return [String]
attr_accessor :spreadsheet_id
# The total number of cells updated.
# Corresponds to the JSON property `totalUpdatedCells`
# @return [Fixnum]
attr_accessor :total_updated_cells
# The total number of columns where at least one cell in the column was updated.
# Corresponds to the JSON property `totalUpdatedColumns`
# @return [Fixnum]
attr_accessor :total_updated_columns
# The total number of rows where at least one cell in the row was updated.
# Corresponds to the JSON property `totalUpdatedRows`
# @return [Fixnum]
attr_accessor :total_updated_rows
# The total number of sheets where at least one cell in the sheet was updated.
# Corresponds to the JSON property `totalUpdatedSheets`
# @return [Fixnum]
attr_accessor :total_updated_sheets
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@responses = args[:responses] if args.key?(:responses)
@spreadsheet_id = args[:spreadsheet_id] if args.key?(:spreadsheet_id)
@total_updated_cells = args[:total_updated_cells] if args.key?(:total_updated_cells)
@total_updated_columns = args[:total_updated_columns] if args.key?(:total_updated_columns)
@total_updated_rows = args[:total_updated_rows] if args.key?(:total_updated_rows)
@total_updated_sheets = args[:total_updated_sheets] if args.key?(:total_updated_sheets)
end
end
# The specification of a BigQuery data source that's connected to a sheet.
class BigQueryDataSourceSpec
include Google::Apis::Core::Hashable
# The ID of a BigQuery enabled GCP project with a billing account attached. For
# any queries executed against the data source, the project is charged.
# Corresponds to the JSON property `projectId`
# @return [String]
attr_accessor :project_id
# Specifies a custom BigQuery query.
# Corresponds to the JSON property `querySpec`
# @return [Google::Apis::SheetsV4::BigQueryQuerySpec]
attr_accessor :query_spec
# Specifies a BigQuery table definition. Only [native tables](https://cloud.
# google.com/bigquery/docs/tables-intro) is allowed.
# Corresponds to the JSON property `tableSpec`
# @return [Google::Apis::SheetsV4::BigQueryTableSpec]
attr_accessor :table_spec
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@project_id = args[:project_id] if args.key?(:project_id)
@query_spec = args[:query_spec] if args.key?(:query_spec)
@table_spec = args[:table_spec] if args.key?(:table_spec)
end
end
# Specifies a custom BigQuery query.
class BigQueryQuerySpec
include Google::Apis::Core::Hashable
# The raw query string.
# Corresponds to the JSON property `rawQuery`
# @return [String]
attr_accessor :raw_query
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@raw_query = args[:raw_query] if args.key?(:raw_query)
end
end
# Specifies a BigQuery table definition. Only [native tables](https://cloud.
# google.com/bigquery/docs/tables-intro) is allowed.
class BigQueryTableSpec
include Google::Apis::Core::Hashable
# The BigQuery dataset id.
# Corresponds to the JSON property `datasetId`
# @return [String]
attr_accessor :dataset_id
# The BigQuery table id.
# Corresponds to the JSON property `tableId`
# @return [String]
attr_accessor :table_id
# The ID of a BigQuery project the table belongs to. If not specified, the
# project_id is assumed.
# Corresponds to the JSON property `tableProjectId`
# @return [String]
attr_accessor :table_project_id
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@dataset_id = args[:dataset_id] if args.key?(:dataset_id)
@table_id = args[:table_id] if args.key?(:table_id)
@table_project_id = args[:table_project_id] if args.key?(:table_project_id)
end
end
# A condition that can evaluate to true or false. BooleanConditions are used by
# conditional formatting, data validation, and the criteria in filters.
class BooleanCondition
include Google::Apis::Core::Hashable
# The type of condition.
# Corresponds to the JSON property `type`
# @return [String]
attr_accessor :type
# The values of the condition. The number of supported values depends on the
# condition type. Some support zero values, others one or two values, and
# ConditionType.ONE_OF_LIST supports an arbitrary number of values.
# Corresponds to the JSON property `values`
# @return [Array<Google::Apis::SheetsV4::ConditionValue>]
attr_accessor :values
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@type = args[:type] if args.key?(:type)
@values = args[:values] if args.key?(:values)
end
end
# A rule that may or may not match, depending on the condition.
class BooleanRule
include Google::Apis::Core::Hashable
# A condition that can evaluate to true or false. BooleanConditions are used by
# conditional formatting, data validation, and the criteria in filters.
# Corresponds to the JSON property `condition`
# @return [Google::Apis::SheetsV4::BooleanCondition]
attr_accessor :condition
# The format of a cell.
# Corresponds to the JSON property `format`
# @return [Google::Apis::SheetsV4::CellFormat]
attr_accessor :format
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@condition = args[:condition] if args.key?(:condition)
@format = args[:format] if args.key?(:format)
end
end
# A border along a cell.
class Border
include Google::Apis::Core::Hashable
# Represents a color in the RGBA color space. This representation is designed
# for simplicity of conversion to/from color representations in various
# languages over compactness; for example, the fields of this representation can
# be trivially provided to the constructor of "java.awt.Color" in Java; it can
# also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
# method in iOS; and, with just a little work, it can be easily formatted into a
# CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
# information about the absolute color space that should be used to interpret
# the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
# applications SHOULD assume the sRGB color space. Note: when color equality
# needs to be decided, implementations, unless documented otherwise, will treat
# two colors to be equal if all their red, green, blue and alpha values each
# differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
# public static java.awt.Color fromProto(Color protocolor) ` float alpha =
# protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
# java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
# ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
# float) color.getRed(); float green = (float) color.getGreen(); float blue = (
# float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
# = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
# .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
# ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
# denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
# Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
# protocolor red]; float green = [protocolor green]; float blue = [protocolor
# blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
# alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
# colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
# UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
# green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
# alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
# blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
# [result autorelease]; return result; ` // ... Example (JavaScript): // ...
# var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
# var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
# var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
# var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
# rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
# 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
# ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
# ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
# hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
# var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
# resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
# join(''); `; // ...
# Corresponds to the JSON property `color`
# @return [Google::Apis::SheetsV4::Color]
attr_accessor :color
# A color value.
# Corresponds to the JSON property `colorStyle`
# @return [Google::Apis::SheetsV4::ColorStyle]
attr_accessor :color_style
# The style of the border.
# Corresponds to the JSON property `style`
# @return [String]
attr_accessor :style
# The width of the border, in pixels. Deprecated; the width is determined by the
# "style" field.
# Corresponds to the JSON property `width`
# @return [Fixnum]
attr_accessor :width
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@color = args[:color] if args.key?(:color)
@color_style = args[:color_style] if args.key?(:color_style)
@style = args[:style] if args.key?(:style)
@width = args[:width] if args.key?(:width)
end
end
# The borders of the cell.
class Borders
include Google::Apis::Core::Hashable
# A border along a cell.
# Corresponds to the JSON property `bottom`
# @return [Google::Apis::SheetsV4::Border]
attr_accessor :bottom
# A border along a cell.
# Corresponds to the JSON property `left`
# @return [Google::Apis::SheetsV4::Border]
attr_accessor :left
# A border along a cell.
# Corresponds to the JSON property `right`
# @return [Google::Apis::SheetsV4::Border]
attr_accessor :right
# A border along a cell.
# Corresponds to the JSON property `top`
# @return [Google::Apis::SheetsV4::Border]
attr_accessor :top
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@bottom = args[:bottom] if args.key?(:bottom)
@left = args[:left] if args.key?(:left)
@right = args[:right] if args.key?(:right)
@top = args[:top] if args.key?(:top)
end
end
# A bubble chart.
class BubbleChartSpec
include Google::Apis::Core::Hashable
# Represents a color in the RGBA color space. This representation is designed
# for simplicity of conversion to/from color representations in various
# languages over compactness; for example, the fields of this representation can
# be trivially provided to the constructor of "java.awt.Color" in Java; it can
# also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
# method in iOS; and, with just a little work, it can be easily formatted into a
# CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
# information about the absolute color space that should be used to interpret
# the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
# applications SHOULD assume the sRGB color space. Note: when color equality
# needs to be decided, implementations, unless documented otherwise, will treat
# two colors to be equal if all their red, green, blue and alpha values each
# differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
# public static java.awt.Color fromProto(Color protocolor) ` float alpha =
# protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
# java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
# ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
# float) color.getRed(); float green = (float) color.getGreen(); float blue = (
# float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
# = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
# .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
# ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
# denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
# Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
# protocolor red]; float green = [protocolor green]; float blue = [protocolor
# blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
# alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
# colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
# UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
# green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
# alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
# blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
# [result autorelease]; return result; ` // ... Example (JavaScript): // ...
# var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
# var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
# var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
# var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
# rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
# 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
# ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
# ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
# hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
# var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
# resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
# join(''); `; // ...
# Corresponds to the JSON property `bubbleBorderColor`
# @return [Google::Apis::SheetsV4::Color]
attr_accessor :bubble_border_color
# A color value.
# Corresponds to the JSON property `bubbleBorderColorStyle`
# @return [Google::Apis::SheetsV4::ColorStyle]
attr_accessor :bubble_border_color_style
# The data included in a domain or series.
# Corresponds to the JSON property `bubbleLabels`
# @return [Google::Apis::SheetsV4::ChartData]
attr_accessor :bubble_labels
# The max radius size of the bubbles, in pixels. If specified, the field must be
# a positive value.
# Corresponds to the JSON property `bubbleMaxRadiusSize`
# @return [Fixnum]
attr_accessor :bubble_max_radius_size
# The minimum radius size of the bubbles, in pixels. If specific, the field must
# be a positive value.
# Corresponds to the JSON property `bubbleMinRadiusSize`
# @return [Fixnum]
attr_accessor :bubble_min_radius_size
# The opacity of the bubbles between 0 and 1.0. 0 is fully transparent and 1 is
# fully opaque.
# Corresponds to the JSON property `bubbleOpacity`
# @return [Float]
attr_accessor :bubble_opacity
# The data included in a domain or series.
# Corresponds to the JSON property `bubbleSizes`
# @return [Google::Apis::SheetsV4::ChartData]
attr_accessor :bubble_sizes
# The format of a run of text in a cell. Absent values indicate that the field
# isn't specified.
# Corresponds to the JSON property `bubbleTextStyle`
# @return [Google::Apis::SheetsV4::TextFormat]
attr_accessor :bubble_text_style
# The data included in a domain or series.
# Corresponds to the JSON property `domain`
# @return [Google::Apis::SheetsV4::ChartData]
attr_accessor :domain
# The data included in a domain or series.
# Corresponds to the JSON property `groupIds`
# @return [Google::Apis::SheetsV4::ChartData]
attr_accessor :group_ids
# Where the legend of the chart should be drawn.
# Corresponds to the JSON property `legendPosition`
# @return [String]
attr_accessor :legend_position
# The data included in a domain or series.
# Corresponds to the JSON property `series`
# @return [Google::Apis::SheetsV4::ChartData]
attr_accessor :series
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@bubble_border_color = args[:bubble_border_color] if args.key?(:bubble_border_color)
@bubble_border_color_style = args[:bubble_border_color_style] if args.key?(:bubble_border_color_style)
@bubble_labels = args[:bubble_labels] if args.key?(:bubble_labels)
@bubble_max_radius_size = args[:bubble_max_radius_size] if args.key?(:bubble_max_radius_size)
@bubble_min_radius_size = args[:bubble_min_radius_size] if args.key?(:bubble_min_radius_size)
@bubble_opacity = args[:bubble_opacity] if args.key?(:bubble_opacity)
@bubble_sizes = args[:bubble_sizes] if args.key?(:bubble_sizes)
@bubble_text_style = args[:bubble_text_style] if args.key?(:bubble_text_style)
@domain = args[:domain] if args.key?(:domain)
@group_ids = args[:group_ids] if args.key?(:group_ids)
@legend_position = args[:legend_position] if args.key?(:legend_position)
@series = args[:series] if args.key?(:series)
end
end
# A candlestick chart.
class CandlestickChartSpec
include Google::Apis::Core::Hashable
# The Candlestick chart data. Only one CandlestickData is supported.
# Corresponds to the JSON property `data`
# @return [Array<Google::Apis::SheetsV4::CandlestickData>]
attr_accessor :data
# The domain of a CandlestickChart.
# Corresponds to the JSON property `domain`
# @return [Google::Apis::SheetsV4::CandlestickDomain]
attr_accessor :domain
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data = args[:data] if args.key?(:data)
@domain = args[:domain] if args.key?(:domain)
end
end
# The Candlestick chart data, each containing the low, open, close, and high
# values for a series.
class CandlestickData
include Google::Apis::Core::Hashable
# The series of a CandlestickData.
# Corresponds to the JSON property `closeSeries`
# @return [Google::Apis::SheetsV4::CandlestickSeries]
attr_accessor :close_series
# The series of a CandlestickData.
# Corresponds to the JSON property `highSeries`
# @return [Google::Apis::SheetsV4::CandlestickSeries]
attr_accessor :high_series
# The series of a CandlestickData.
# Corresponds to the JSON property `lowSeries`
# @return [Google::Apis::SheetsV4::CandlestickSeries]
attr_accessor :low_series
# The series of a CandlestickData.
# Corresponds to the JSON property `openSeries`
# @return [Google::Apis::SheetsV4::CandlestickSeries]
attr_accessor :open_series
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@close_series = args[:close_series] if args.key?(:close_series)
@high_series = args[:high_series] if args.key?(:high_series)
@low_series = args[:low_series] if args.key?(:low_series)
@open_series = args[:open_series] if args.key?(:open_series)
end
end
# The domain of a CandlestickChart.
class CandlestickDomain
include Google::Apis::Core::Hashable
# The data included in a domain or series.
# Corresponds to the JSON property `data`
# @return [Google::Apis::SheetsV4::ChartData]
attr_accessor :data
# True to reverse the order of the domain values (horizontal axis).
# Corresponds to the JSON property `reversed`
# @return [Boolean]
attr_accessor :reversed
alias_method :reversed?, :reversed
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data = args[:data] if args.key?(:data)
@reversed = args[:reversed] if args.key?(:reversed)
end
end
# The series of a CandlestickData.
class CandlestickSeries
include Google::Apis::Core::Hashable
# The data included in a domain or series.
# Corresponds to the JSON property `data`
# @return [Google::Apis::SheetsV4::ChartData]
attr_accessor :data
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data = args[:data] if args.key?(:data)
end
end
# Data about a specific cell.
class CellData
include Google::Apis::Core::Hashable
# A data source formula.
# Corresponds to the JSON property `dataSourceFormula`
# @return [Google::Apis::SheetsV4::DataSourceFormula]
attr_accessor :data_source_formula
# A data source table, which allows the user to import a static table of data
# from the DataSource into Sheets. This is also known as "Extract" in the Sheets
# editor.
# Corresponds to the JSON property `dataSourceTable`
# @return [Google::Apis::SheetsV4::DataSourceTable]
attr_accessor :data_source_table
# A data validation rule.
# Corresponds to the JSON property `dataValidation`
# @return [Google::Apis::SheetsV4::DataValidationRule]
attr_accessor :data_validation
# The format of a cell.
# Corresponds to the JSON property `effectiveFormat`
# @return [Google::Apis::SheetsV4::CellFormat]
attr_accessor :effective_format
# The kinds of value that a cell in a spreadsheet can have.
# Corresponds to the JSON property `effectiveValue`
# @return [Google::Apis::SheetsV4::ExtendedValue]
attr_accessor :effective_value
# The formatted value of the cell. This is the value as it's shown to the user.
# This field is read-only.
# Corresponds to the JSON property `formattedValue`
# @return [String]
attr_accessor :formatted_value
# A hyperlink this cell points to, if any. If the cell contains multiple
# hyperlinks, this field will be empty. This field is read-only. To set it, use
# a `=HYPERLINK` formula in the userEnteredValue.formulaValue field.
# Corresponds to the JSON property `hyperlink`
# @return [String]
attr_accessor :hyperlink
# Any note on the cell.
# Corresponds to the JSON property `note`
# @return [String]
attr_accessor :note
# A pivot table.
# Corresponds to the JSON property `pivotTable`
# @return [Google::Apis::SheetsV4::PivotTable]
attr_accessor :pivot_table
# Runs of rich text applied to subsections of the cell. Runs are only valid on
# user entered strings, not formulas, bools, or numbers. Properties of a run
# start at a specific index in the text and continue until the next run. Runs
# will inherit the properties of the cell unless explicitly changed. When
# writing, the new runs will overwrite any prior runs. When writing a new
# user_entered_value, previous runs are erased.
# Corresponds to the JSON property `textFormatRuns`
# @return [Array<Google::Apis::SheetsV4::TextFormatRun>]
attr_accessor :text_format_runs
# The format of a cell.
# Corresponds to the JSON property `userEnteredFormat`
# @return [Google::Apis::SheetsV4::CellFormat]
attr_accessor :user_entered_format
# The kinds of value that a cell in a spreadsheet can have.
# Corresponds to the JSON property `userEnteredValue`
# @return [Google::Apis::SheetsV4::ExtendedValue]
attr_accessor :user_entered_value
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data_source_formula = args[:data_source_formula] if args.key?(:data_source_formula)
@data_source_table = args[:data_source_table] if args.key?(:data_source_table)
@data_validation = args[:data_validation] if args.key?(:data_validation)
@effective_format = args[:effective_format] if args.key?(:effective_format)
@effective_value = args[:effective_value] if args.key?(:effective_value)
@formatted_value = args[:formatted_value] if args.key?(:formatted_value)
@hyperlink = args[:hyperlink] if args.key?(:hyperlink)
@note = args[:note] if args.key?(:note)
@pivot_table = args[:pivot_table] if args.key?(:pivot_table)
@text_format_runs = args[:text_format_runs] if args.key?(:text_format_runs)
@user_entered_format = args[:user_entered_format] if args.key?(:user_entered_format)
@user_entered_value = args[:user_entered_value] if args.key?(:user_entered_value)
end
end
# The format of a cell.
class CellFormat
include Google::Apis::Core::Hashable
# Represents a color in the RGBA color space. This representation is designed
# for simplicity of conversion to/from color representations in various
# languages over compactness; for example, the fields of this representation can
# be trivially provided to the constructor of "java.awt.Color" in Java; it can
# also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
# method in iOS; and, with just a little work, it can be easily formatted into a
# CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
# information about the absolute color space that should be used to interpret
# the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
# applications SHOULD assume the sRGB color space. Note: when color equality
# needs to be decided, implementations, unless documented otherwise, will treat
# two colors to be equal if all their red, green, blue and alpha values each
# differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
# public static java.awt.Color fromProto(Color protocolor) ` float alpha =
# protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
# java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
# ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
# float) color.getRed(); float green = (float) color.getGreen(); float blue = (
# float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
# = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
# .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
# ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
# denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
# Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
# protocolor red]; float green = [protocolor green]; float blue = [protocolor
# blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
# alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
# colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
# UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
# green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
# alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
# blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
# [result autorelease]; return result; ` // ... Example (JavaScript): // ...
# var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
# var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
# var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
# var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
# rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
# 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
# ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
# ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
# hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
# var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
# resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
# join(''); `; // ...
# Corresponds to the JSON property `backgroundColor`
# @return [Google::Apis::SheetsV4::Color]
attr_accessor :background_color
# A color value.
# Corresponds to the JSON property `backgroundColorStyle`
# @return [Google::Apis::SheetsV4::ColorStyle]
attr_accessor :background_color_style
# The borders of the cell.
# Corresponds to the JSON property `borders`
# @return [Google::Apis::SheetsV4::Borders]
attr_accessor :borders
# The horizontal alignment of the value in the cell.
# Corresponds to the JSON property `horizontalAlignment`
# @return [String]
attr_accessor :horizontal_alignment
# How a hyperlink, if it exists, should be displayed in the cell.
# Corresponds to the JSON property `hyperlinkDisplayType`
# @return [String]
attr_accessor :hyperlink_display_type
# The number format of a cell.
# Corresponds to the JSON property `numberFormat`
# @return [Google::Apis::SheetsV4::NumberFormat]
attr_accessor :number_format
# The amount of padding around the cell, in pixels. When updating padding, every
# field must be specified.
# Corresponds to the JSON property `padding`
# @return [Google::Apis::SheetsV4::Padding]
attr_accessor :padding
# The direction of the text in the cell.
# Corresponds to the JSON property `textDirection`
# @return [String]
attr_accessor :text_direction
# The format of a run of text in a cell. Absent values indicate that the field
# isn't specified.
# Corresponds to the JSON property `textFormat`
# @return [Google::Apis::SheetsV4::TextFormat]
attr_accessor :text_format
# The rotation applied to text in a cell.
# Corresponds to the JSON property `textRotation`
# @return [Google::Apis::SheetsV4::TextRotation]
attr_accessor :text_rotation
# The vertical alignment of the value in the cell.
# Corresponds to the JSON property `verticalAlignment`
# @return [String]
attr_accessor :vertical_alignment
# The wrap strategy for the value in the cell.
# Corresponds to the JSON property `wrapStrategy`
# @return [String]
attr_accessor :wrap_strategy
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@background_color = args[:background_color] if args.key?(:background_color)
@background_color_style = args[:background_color_style] if args.key?(:background_color_style)
@borders = args[:borders] if args.key?(:borders)
@horizontal_alignment = args[:horizontal_alignment] if args.key?(:horizontal_alignment)
@hyperlink_display_type = args[:hyperlink_display_type] if args.key?(:hyperlink_display_type)
@number_format = args[:number_format] if args.key?(:number_format)
@padding = args[:padding] if args.key?(:padding)
@text_direction = args[:text_direction] if args.key?(:text_direction)
@text_format = args[:text_format] if args.key?(:text_format)
@text_rotation = args[:text_rotation] if args.key?(:text_rotation)
@vertical_alignment = args[:vertical_alignment] if args.key?(:vertical_alignment)
@wrap_strategy = args[:wrap_strategy] if args.key?(:wrap_strategy)
end
end
# The options that define a "view window" for a chart (such as the visible
# values in an axis).
class ChartAxisViewWindowOptions
include Google::Apis::Core::Hashable
# The maximum numeric value to be shown in this view window. If unset, will
# automatically determine a maximum value that looks good for the data.
# Corresponds to the JSON property `viewWindowMax`
# @return [Float]
attr_accessor :view_window_max
# The minimum numeric value to be shown in this view window. If unset, will
# automatically determine a minimum value that looks good for the data.
# Corresponds to the JSON property `viewWindowMin`
# @return [Float]
attr_accessor :view_window_min
# The view window's mode.
# Corresponds to the JSON property `viewWindowMode`
# @return [String]
attr_accessor :view_window_mode
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@view_window_max = args[:view_window_max] if args.key?(:view_window_max)
@view_window_min = args[:view_window_min] if args.key?(:view_window_min)
@view_window_mode = args[:view_window_mode] if args.key?(:view_window_mode)
end
end
# Custom number formatting options for chart attributes.
class ChartCustomNumberFormatOptions
include Google::Apis::Core::Hashable
# Custom prefix to be prepended to the chart attribute. This field is optional.
# Corresponds to the JSON property `prefix`
# @return [String]
attr_accessor :prefix
# Custom suffix to be appended to the chart attribute. This field is optional.
# Corresponds to the JSON property `suffix`
# @return [String]
attr_accessor :suffix
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@prefix = args[:prefix] if args.key?(:prefix)
@suffix = args[:suffix] if args.key?(:suffix)
end
end
# The data included in a domain or series.
class ChartData
include Google::Apis::Core::Hashable
# The aggregation type for the series of a data source chart. Not supported for
# regular charts.
# Corresponds to the JSON property `aggregateType`
# @return [String]
attr_accessor :aggregate_type
# An unique identifier that references a data source column.
# Corresponds to the JSON property `columnReference`
# @return [Google::Apis::SheetsV4::DataSourceColumnReference]
attr_accessor :column_reference
# An optional setting on the ChartData of the domain of a data source chart that
# defines buckets for the values in the domain rather than breaking out each
# individual value. For example, when plotting a data source chart, you can
# specify a histogram rule on the domain (it should only contain numeric values),
# grouping its values into buckets. Any values of a chart series that fall into
# the same bucket are aggregated based on the aggregate_type.
# Corresponds to the JSON property `groupRule`
# @return [Google::Apis::SheetsV4::ChartGroupRule]
attr_accessor :group_rule
# Source ranges for a chart.
# Corresponds to the JSON property `sourceRange`
# @return [Google::Apis::SheetsV4::ChartSourceRange]
attr_accessor :source_range
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@aggregate_type = args[:aggregate_type] if args.key?(:aggregate_type)
@column_reference = args[:column_reference] if args.key?(:column_reference)
@group_rule = args[:group_rule] if args.key?(:group_rule)
@source_range = args[:source_range] if args.key?(:source_range)
end
end
# Allows you to organize the date-time values in a source data column into
# buckets based on selected parts of their date or time values.
class ChartDateTimeRule
include Google::Apis::Core::Hashable
# The type of date-time grouping to apply.
# Corresponds to the JSON property `type`
# @return [String]
attr_accessor :type
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@type = args[:type] if args.key?(:type)
end
end
# An optional setting on the ChartData of the domain of a data source chart that
# defines buckets for the values in the domain rather than breaking out each
# individual value. For example, when plotting a data source chart, you can
# specify a histogram rule on the domain (it should only contain numeric values),
# grouping its values into buckets. Any values of a chart series that fall into
# the same bucket are aggregated based on the aggregate_type.
class ChartGroupRule
include Google::Apis::Core::Hashable
# Allows you to organize the date-time values in a source data column into
# buckets based on selected parts of their date or time values.
# Corresponds to the JSON property `dateTimeRule`
# @return [Google::Apis::SheetsV4::ChartDateTimeRule]
attr_accessor :date_time_rule
# Allows you to organize numeric values in a source data column into buckets of
# constant size.
# Corresponds to the JSON property `histogramRule`
# @return [Google::Apis::SheetsV4::ChartHistogramRule]
attr_accessor :histogram_rule
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@date_time_rule = args[:date_time_rule] if args.key?(:date_time_rule)
@histogram_rule = args[:histogram_rule] if args.key?(:histogram_rule)
end
end
# Allows you to organize numeric values in a source data column into buckets of
# constant size.
class ChartHistogramRule
include Google::Apis::Core::Hashable
# The size of the buckets that are created. Must be positive.
# Corresponds to the JSON property `intervalSize`
# @return [Float]
attr_accessor :interval_size
# The maximum value at which items are placed into buckets. Values greater than
# the maximum are grouped into a single bucket. If omitted, it is determined by
# the maximum item value.
# Corresponds to the JSON property `maxValue`
# @return [Float]
attr_accessor :max_value
# The minimum value at which items are placed into buckets. Values that are less
# than the minimum are grouped into a single bucket. If omitted, it is
# determined by the minimum item value.
# Corresponds to the JSON property `minValue`
# @return [Float]
attr_accessor :min_value
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@interval_size = args[:interval_size] if args.key?(:interval_size)
@max_value = args[:max_value] if args.key?(:max_value)
@min_value = args[:min_value] if args.key?(:min_value)
end
end
# Source ranges for a chart.
class ChartSourceRange
include Google::Apis::Core::Hashable
# The ranges of data for a series or domain. Exactly one dimension must have a
# length of 1, and all sources in the list must have the same dimension with
# length 1. The domain (if it exists) & all series must have the same number of
# source ranges. If using more than one source range, then the source range at a
# given offset must be in order and contiguous across the domain and series. For
# example, these are valid configurations: domain sources: A1:A5 series1 sources:
# B1:B5 series2 sources: D6:D10 domain sources: A1:A5, C10:C12 series1 sources:
# B1:B5, D10:D12 series2 sources: C1:C5, E10:E12
# Corresponds to the JSON property `sources`
# @return [Array<Google::Apis::SheetsV4::GridRange>]
attr_accessor :sources
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@sources = args[:sources] if args.key?(:sources)
end
end
# The specifications of a chart.
class ChartSpec
include Google::Apis::Core::Hashable
# The alternative text that describes the chart. This is often used for
# accessibility.
# Corresponds to the JSON property `altText`
# @return [String]
attr_accessor :alt_text
# Represents a color in the RGBA color space. This representation is designed
# for simplicity of conversion to/from color representations in various
# languages over compactness; for example, the fields of this representation can
# be trivially provided to the constructor of "java.awt.Color" in Java; it can
# also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
# method in iOS; and, with just a little work, it can be easily formatted into a
# CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
# information about the absolute color space that should be used to interpret
# the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
# applications SHOULD assume the sRGB color space. Note: when color equality
# needs to be decided, implementations, unless documented otherwise, will treat
# two colors to be equal if all their red, green, blue and alpha values each
# differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
# public static java.awt.Color fromProto(Color protocolor) ` float alpha =
# protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
# java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
# ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
# float) color.getRed(); float green = (float) color.getGreen(); float blue = (
# float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
# = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
# .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
# ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
# denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
# Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
# protocolor red]; float green = [protocolor green]; float blue = [protocolor
# blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
# alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
# colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
# UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
# green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
# alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
# blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
# [result autorelease]; return result; ` // ... Example (JavaScript): // ...
# var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
# var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
# var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
# var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
# rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
# 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
# ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
# ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
# hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
# var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
# resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
# join(''); `; // ...
# Corresponds to the JSON property `backgroundColor`
# @return [Google::Apis::SheetsV4::Color]
attr_accessor :background_color
# A color value.
# Corresponds to the JSON property `backgroundColorStyle`
# @return [Google::Apis::SheetsV4::ColorStyle]
attr_accessor :background_color_style
# The specification for a basic chart. See BasicChartType for the list of charts
# this supports.
# Corresponds to the JSON property `basicChart`
# @return [Google::Apis::SheetsV4::BasicChartSpec]
attr_accessor :basic_chart
# A bubble chart.
# Corresponds to the JSON property `bubbleChart`
# @return [Google::Apis::SheetsV4::BubbleChartSpec]
attr_accessor :bubble_chart
# A candlestick chart.
# Corresponds to the JSON property `candlestickChart`
# @return [Google::Apis::SheetsV4::CandlestickChartSpec]
attr_accessor :candlestick_chart
# Properties of a data source chart.
# Corresponds to the JSON property `dataSourceChartProperties`
# @return [Google::Apis::SheetsV4::DataSourceChartProperties]
attr_accessor :data_source_chart_properties
# The filters applied to the source data of the chart. Only supported for data
# source charts.
# Corresponds to the JSON property `filterSpecs`
# @return [Array<Google::Apis::SheetsV4::FilterSpec>]
attr_accessor :filter_specs
# The name of the font to use by default for all chart text (e.g. title, axis
# labels, legend). If a font is specified for a specific part of the chart it
# will override this font name.
# Corresponds to the JSON property `fontName`
# @return [String]
attr_accessor :font_name
# Determines how the charts will use hidden rows or columns.
# Corresponds to the JSON property `hiddenDimensionStrategy`
# @return [String]
attr_accessor :hidden_dimension_strategy
# A histogram chart. A histogram chart groups data items into bins, displaying
# each bin as a column of stacked items. Histograms are used to display the
# distribution of a dataset. Each column of items represents a range into which
# those items fall. The number of bins can be chosen automatically or specified
# explicitly.
# Corresponds to the JSON property `histogramChart`
# @return [Google::Apis::SheetsV4::HistogramChartSpec]
attr_accessor :histogram_chart
# True to make a chart fill the entire space in which it's rendered with minimum
# padding. False to use the default padding. (Not applicable to Geo and Org
# charts.)
# Corresponds to the JSON property `maximized`
# @return [Boolean]
attr_accessor :maximized
alias_method :maximized?, :maximized
# An org chart. Org charts require a unique set of labels in labels and may
# optionally include parent_labels and tooltips. parent_labels contain, for each
# node, the label identifying the parent node. tooltips contain, for each node,
# an optional tooltip. For example, to describe an OrgChart with Alice as the
# CEO, Bob as the President (reporting to Alice) and Cathy as VP of Sales (also
# reporting to Alice), have labels contain "Alice", "Bob", "Cathy",
# parent_labels contain "", "Alice", "Alice" and tooltips contain "CEO", "
# President", "VP Sales".
# Corresponds to the JSON property `orgChart`
# @return [Google::Apis::SheetsV4::OrgChartSpec]
attr_accessor :org_chart
# A pie chart.
# Corresponds to the JSON property `pieChart`
# @return [Google::Apis::SheetsV4::PieChartSpec]
attr_accessor :pie_chart
# A scorecard chart. Scorecard charts are used to highlight key performance
# indicators, known as KPIs, on the spreadsheet. A scorecard chart can represent
# things like total sales, average cost, or a top selling item. You can specify
# a single data value, or aggregate over a range of data. Percentage or absolute
# difference from a baseline value can be highlighted, like changes over time.
# Corresponds to the JSON property `scorecardChart`
# @return [Google::Apis::SheetsV4::ScorecardChartSpec]
attr_accessor :scorecard_chart
# The order to sort the chart data by. Only a single sort spec is supported.
# Only supported for data source charts.
# Corresponds to the JSON property `sortSpecs`
# @return [Array<Google::Apis::SheetsV4::SortSpec>]
attr_accessor :sort_specs
# The subtitle of the chart.
# Corresponds to the JSON property `subtitle`
# @return [String]
attr_accessor :subtitle
# The format of a run of text in a cell. Absent values indicate that the field
# isn't specified.
# Corresponds to the JSON property `subtitleTextFormat`
# @return [Google::Apis::SheetsV4::TextFormat]
attr_accessor :subtitle_text_format
# Position settings for text.
# Corresponds to the JSON property `subtitleTextPosition`
# @return [Google::Apis::SheetsV4::TextPosition]
attr_accessor :subtitle_text_position
# The title of the chart.
# Corresponds to the JSON property `title`
# @return [String]
attr_accessor :title
# The format of a run of text in a cell. Absent values indicate that the field
# isn't specified.
# Corresponds to the JSON property `titleTextFormat`
# @return [Google::Apis::SheetsV4::TextFormat]
attr_accessor :title_text_format
# Position settings for text.
# Corresponds to the JSON property `titleTextPosition`
# @return [Google::Apis::SheetsV4::TextPosition]
attr_accessor :title_text_position
# A Treemap chart.
# Corresponds to the JSON property `treemapChart`
# @return [Google::Apis::SheetsV4::TreemapChartSpec]
attr_accessor :treemap_chart
# A waterfall chart.
# Corresponds to the JSON property `waterfallChart`
# @return [Google::Apis::SheetsV4::WaterfallChartSpec]
attr_accessor :waterfall_chart
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@alt_text = args[:alt_text] if args.key?(:alt_text)
@background_color = args[:background_color] if args.key?(:background_color)
@background_color_style = args[:background_color_style] if args.key?(:background_color_style)
@basic_chart = args[:basic_chart] if args.key?(:basic_chart)
@bubble_chart = args[:bubble_chart] if args.key?(:bubble_chart)
@candlestick_chart = args[:candlestick_chart] if args.key?(:candlestick_chart)
@data_source_chart_properties = args[:data_source_chart_properties] if args.key?(:data_source_chart_properties)
@filter_specs = args[:filter_specs] if args.key?(:filter_specs)
@font_name = args[:font_name] if args.key?(:font_name)
@hidden_dimension_strategy = args[:hidden_dimension_strategy] if args.key?(:hidden_dimension_strategy)
@histogram_chart = args[:histogram_chart] if args.key?(:histogram_chart)
@maximized = args[:maximized] if args.key?(:maximized)
@org_chart = args[:org_chart] if args.key?(:org_chart)
@pie_chart = args[:pie_chart] if args.key?(:pie_chart)
@scorecard_chart = args[:scorecard_chart] if args.key?(:scorecard_chart)
@sort_specs = args[:sort_specs] if args.key?(:sort_specs)
@subtitle = args[:subtitle] if args.key?(:subtitle)
@subtitle_text_format = args[:subtitle_text_format] if args.key?(:subtitle_text_format)
@subtitle_text_position = args[:subtitle_text_position] if args.key?(:subtitle_text_position)
@title = args[:title] if args.key?(:title)
@title_text_format = args[:title_text_format] if args.key?(:title_text_format)
@title_text_position = args[:title_text_position] if args.key?(:title_text_position)
@treemap_chart = args[:treemap_chart] if args.key?(:treemap_chart)
@waterfall_chart = args[:waterfall_chart] if args.key?(:waterfall_chart)
end
end
# Clears the basic filter, if any exists on the sheet.
class ClearBasicFilterRequest
include Google::Apis::Core::Hashable
# The sheet ID on which the basic filter should be cleared.
# Corresponds to the JSON property `sheetId`
# @return [Fixnum]
attr_accessor :sheet_id
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@sheet_id = args[:sheet_id] if args.key?(:sheet_id)
end
end
# The request for clearing a range of values in a spreadsheet.
class ClearValuesRequest
include Google::Apis::Core::Hashable
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
end
end
# The response when clearing a range of values in a spreadsheet.
class ClearValuesResponse
include Google::Apis::Core::Hashable
# The range (in A1 notation) that was cleared. (If the request was for an
# unbounded range or a ranger larger than the bounds of the sheet, this will be
# the actual range that was cleared, bounded to the sheet's limits.)
# Corresponds to the JSON property `clearedRange`
# @return [String]
attr_accessor :cleared_range
# The spreadsheet the updates were applied to.
# Corresponds to the JSON property `spreadsheetId`
# @return [String]
attr_accessor :spreadsheet_id
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@cleared_range = args[:cleared_range] if args.key?(:cleared_range)
@spreadsheet_id = args[:spreadsheet_id] if args.key?(:spreadsheet_id)
end
end
# Represents a color in the RGBA color space. This representation is designed
# for simplicity of conversion to/from color representations in various
# languages over compactness; for example, the fields of this representation can
# be trivially provided to the constructor of "java.awt.Color" in Java; it can
# also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
# method in iOS; and, with just a little work, it can be easily formatted into a
# CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
# information about the absolute color space that should be used to interpret
# the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
# applications SHOULD assume the sRGB color space. Note: when color equality
# needs to be decided, implementations, unless documented otherwise, will treat
# two colors to be equal if all their red, green, blue and alpha values each
# differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
# public static java.awt.Color fromProto(Color protocolor) ` float alpha =
# protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
# java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
# ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
# float) color.getRed(); float green = (float) color.getGreen(); float blue = (
# float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
# = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
# .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
# ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
# denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
# Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
# protocolor red]; float green = [protocolor green]; float blue = [protocolor
# blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
# alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
# colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
# UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
# green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
# alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
# blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
# [result autorelease]; return result; ` // ... Example (JavaScript): // ...
# var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
# var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
# var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
# var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
# rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
# 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
# ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
# ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
# hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
# var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
# resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
# join(''); `; // ...
class Color
include Google::Apis::Core::Hashable
# The fraction of this color that should be applied to the pixel. That is, the
# final pixel color is defined by the equation: pixel color = alpha * (this
# color) + (1.0 - alpha) * (background color) This means that a value of 1.0
# corresponds to a solid color, whereas a value of 0.0 corresponds to a
# completely transparent color. This uses a wrapper message rather than a simple
# float scalar so that it is possible to distinguish between a default value and
# the value being unset. If omitted, this color object is to be rendered as a
# solid color (as if the alpha value had been explicitly given with a value of 1.
# 0).
# Corresponds to the JSON property `alpha`
# @return [Float]
attr_accessor :alpha
# The amount of blue in the color as a value in the interval [0, 1].
# Corresponds to the JSON property `blue`
# @return [Float]
attr_accessor :blue
# The amount of green in the color as a value in the interval [0, 1].
# Corresponds to the JSON property `green`
# @return [Float]
attr_accessor :green
# The amount of red in the color as a value in the interval [0, 1].
# Corresponds to the JSON property `red`
# @return [Float]
attr_accessor :red
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@alpha = args[:alpha] if args.key?(:alpha)
@blue = args[:blue] if args.key?(:blue)
@green = args[:green] if args.key?(:green)
@red = args[:red] if args.key?(:red)
end
end
# A color value.
class ColorStyle
include Google::Apis::Core::Hashable
# Represents a color in the RGBA color space. This representation is designed
# for simplicity of conversion to/from color representations in various
# languages over compactness; for example, the fields of this representation can
# be trivially provided to the constructor of "java.awt.Color" in Java; it can
# also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
# method in iOS; and, with just a little work, it can be easily formatted into a
# CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
# information about the absolute color space that should be used to interpret
# the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
# applications SHOULD assume the sRGB color space. Note: when color equality
# needs to be decided, implementations, unless documented otherwise, will treat
# two colors to be equal if all their red, green, blue and alpha values each
# differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
# public static java.awt.Color fromProto(Color protocolor) ` float alpha =
# protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
# java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
# ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
# float) color.getRed(); float green = (float) color.getGreen(); float blue = (
# float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
# = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
# .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
# ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
# denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
# Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
# protocolor red]; float green = [protocolor green]; float blue = [protocolor
# blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
# alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
# colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
# UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
# green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
# alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
# blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
# [result autorelease]; return result; ` // ... Example (JavaScript): // ...
# var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
# var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
# var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
# var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
# rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
# 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
# ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
# ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
# hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
# var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
# resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
# join(''); `; // ...
# Corresponds to the JSON property `rgbColor`
# @return [Google::Apis::SheetsV4::Color]
attr_accessor :rgb_color
# Theme color.
# Corresponds to the JSON property `themeColor`
# @return [String]
attr_accessor :theme_color
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@rgb_color = args[:rgb_color] if args.key?(:rgb_color)
@theme_color = args[:theme_color] if args.key?(:theme_color)
end
end
# The value of the condition.
class ConditionValue
include Google::Apis::Core::Hashable
# A relative date (based on the current date). Valid only if the type is
# DATE_BEFORE, DATE_AFTER, DATE_ON_OR_BEFORE or DATE_ON_OR_AFTER. Relative dates
# are not supported in data validation. They are supported only in conditional
# formatting and conditional filters.
# Corresponds to the JSON property `relativeDate`
# @return [String]
attr_accessor :relative_date
# A value the condition is based on. The value is parsed as if the user typed
# into a cell. Formulas are supported (and must begin with an `=` or a '+').
# Corresponds to the JSON property `userEnteredValue`
# @return [String]
attr_accessor :user_entered_value
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@relative_date = args[:relative_date] if args.key?(:relative_date)
@user_entered_value = args[:user_entered_value] if args.key?(:user_entered_value)
end
end
# A rule describing a conditional format.
class ConditionalFormatRule
include Google::Apis::Core::Hashable
# A rule that may or may not match, depending on the condition.
# Corresponds to the JSON property `booleanRule`
# @return [Google::Apis::SheetsV4::BooleanRule]
attr_accessor :boolean_rule
# A rule that applies a gradient color scale format, based on the interpolation
# points listed. The format of a cell will vary based on its contents as
# compared to the values of the interpolation points.
# Corresponds to the JSON property `gradientRule`
# @return [Google::Apis::SheetsV4::GradientRule]
attr_accessor :gradient_rule
# The ranges that are formatted if the condition is true. All the ranges must be
# on the same grid.
# Corresponds to the JSON property `ranges`
# @return [Array<Google::Apis::SheetsV4::GridRange>]
attr_accessor :ranges
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@boolean_rule = args[:boolean_rule] if args.key?(:boolean_rule)
@gradient_rule = args[:gradient_rule] if args.key?(:gradient_rule)
@ranges = args[:ranges] if args.key?(:ranges)
end
end
# Copies data from the source to the destination.
class CopyPasteRequest
include Google::Apis::Core::Hashable
# A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
# the start index is inclusive and the end index is exclusive -- [start_index,
# end_index). Missing indexes indicate the range is unbounded on that side. For
# example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
# start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
# 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
# start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
# start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
# start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
# sheet_id:0` The start index must always be less than or equal to the end index.
# If the start index equals the end index, then the range is empty. Empty
# ranges are typically not meaningful and are usually rendered in the UI as `#
# REF!`.
# Corresponds to the JSON property `destination`
# @return [Google::Apis::SheetsV4::GridRange]
attr_accessor :destination
# How that data should be oriented when pasting.
# Corresponds to the JSON property `pasteOrientation`
# @return [String]
attr_accessor :paste_orientation
# What kind of data to paste.
# Corresponds to the JSON property `pasteType`
# @return [String]
attr_accessor :paste_type
# A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
# the start index is inclusive and the end index is exclusive -- [start_index,
# end_index). Missing indexes indicate the range is unbounded on that side. For
# example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
# start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
# 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
# start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
# start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
# start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
# sheet_id:0` The start index must always be less than or equal to the end index.
# If the start index equals the end index, then the range is empty. Empty
# ranges are typically not meaningful and are usually rendered in the UI as `#
# REF!`.
# Corresponds to the JSON property `source`
# @return [Google::Apis::SheetsV4::GridRange]
attr_accessor :source
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@destination = args[:destination] if args.key?(:destination)
@paste_orientation = args[:paste_orientation] if args.key?(:paste_orientation)
@paste_type = args[:paste_type] if args.key?(:paste_type)
@source = args[:source] if args.key?(:source)
end
end
# The request to copy a sheet across spreadsheets.
class CopySheetToAnotherSpreadsheetRequest
include Google::Apis::Core::Hashable
# The ID of the spreadsheet to copy the sheet to.
# Corresponds to the JSON property `destinationSpreadsheetId`
# @return [String]
attr_accessor :destination_spreadsheet_id
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@destination_spreadsheet_id = args[:destination_spreadsheet_id] if args.key?(:destination_spreadsheet_id)
end
end
# A request to create developer metadata.
class CreateDeveloperMetadataRequest
include Google::Apis::Core::Hashable
# Developer metadata associated with a location or object in a spreadsheet.
# Developer metadata may be used to associate arbitrary data with various parts
# of a spreadsheet and will remain associated at those locations as they move
# around and the spreadsheet is edited. For example, if developer metadata is
# associated with row 5 and another row is then subsequently inserted above row
# 5, that original metadata will still be associated with the row it was first
# associated with (what is now row 6). If the associated object is deleted its
# metadata is deleted too.
# Corresponds to the JSON property `developerMetadata`
# @return [Google::Apis::SheetsV4::DeveloperMetadata]
attr_accessor :developer_metadata
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@developer_metadata = args[:developer_metadata] if args.key?(:developer_metadata)
end
end
# The response from creating developer metadata.
class CreateDeveloperMetadataResponse
include Google::Apis::Core::Hashable
# Developer metadata associated with a location or object in a spreadsheet.
# Developer metadata may be used to associate arbitrary data with various parts
# of a spreadsheet and will remain associated at those locations as they move
# around and the spreadsheet is edited. For example, if developer metadata is
# associated with row 5 and another row is then subsequently inserted above row
# 5, that original metadata will still be associated with the row it was first
# associated with (what is now row 6). If the associated object is deleted its
# metadata is deleted too.
# Corresponds to the JSON property `developerMetadata`
# @return [Google::Apis::SheetsV4::DeveloperMetadata]
attr_accessor :developer_metadata
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@developer_metadata = args[:developer_metadata] if args.key?(:developer_metadata)
end
end
# Moves data from the source to the destination.
class CutPasteRequest
include Google::Apis::Core::Hashable
# A coordinate in a sheet. All indexes are zero-based.
# Corresponds to the JSON property `destination`
# @return [Google::Apis::SheetsV4::GridCoordinate]
attr_accessor :destination
# What kind of data to paste. All the source data will be cut, regardless of
# what is pasted.
# Corresponds to the JSON property `pasteType`
# @return [String]
attr_accessor :paste_type
# A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
# the start index is inclusive and the end index is exclusive -- [start_index,
# end_index). Missing indexes indicate the range is unbounded on that side. For
# example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
# start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
# 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
# start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
# start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
# start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
# sheet_id:0` The start index must always be less than or equal to the end index.
# If the start index equals the end index, then the range is empty. Empty
# ranges are typically not meaningful and are usually rendered in the UI as `#
# REF!`.
# Corresponds to the JSON property `source`
# @return [Google::Apis::SheetsV4::GridRange]
attr_accessor :source
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@destination = args[:destination] if args.key?(:destination)
@paste_type = args[:paste_type] if args.key?(:paste_type)
@source = args[:source] if args.key?(:source)
end
end
# The data execution status. A data execution is created to sync a data source
# object with the latest data from a DataSource. It is usually scheduled to run
# at background, you can check its state to tell if an execution completes There
# are several scenarios where a data execution is triggered to run: * Adding a
# data source creates an associated data source sheet as well as a data
# execution to sync the data from the data source to the sheet. * Updating a
# data source creates a data execution to refresh the associated data source
# sheet similarly. * You can send refresh request to explicitly refresh one or
# multiple data source objects.
class DataExecutionStatus
include Google::Apis::Core::Hashable
# The error code.
# Corresponds to the JSON property `errorCode`
# @return [String]
attr_accessor :error_code
# The error message, which may be empty.
# Corresponds to the JSON property `errorMessage`
# @return [String]
attr_accessor :error_message
# Gets the time the data last successfully refreshed.
# Corresponds to the JSON property `lastRefreshTime`
# @return [String]
attr_accessor :last_refresh_time
# The state of the data execution.
# Corresponds to the JSON property `state`
# @return [String]
attr_accessor :state
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@error_code = args[:error_code] if args.key?(:error_code)
@error_message = args[:error_message] if args.key?(:error_message)
@last_refresh_time = args[:last_refresh_time] if args.key?(:last_refresh_time)
@state = args[:state] if args.key?(:state)
end
end
# Filter that describes what data should be selected or returned from a request.
class DataFilter
include Google::Apis::Core::Hashable
# Selects data that matches the specified A1 range.
# Corresponds to the JSON property `a1Range`
# @return [String]
attr_accessor :a1_range
# Selects DeveloperMetadata that matches all of the specified fields. For
# example, if only a metadata ID is specified this considers the
# DeveloperMetadata with that particular unique ID. If a metadata key is
# specified, this considers all developer metadata with that key. If a key,
# visibility, and location type are all specified, this considers all developer
# metadata with that key and visibility that are associated with a location of
# that type. In general, this selects all DeveloperMetadata that matches the
# intersection of all the specified fields; any field or combination of fields
# may be specified.
# Corresponds to the JSON property `developerMetadataLookup`
# @return [Google::Apis::SheetsV4::DeveloperMetadataLookup]
attr_accessor :developer_metadata_lookup
# A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
# the start index is inclusive and the end index is exclusive -- [start_index,
# end_index). Missing indexes indicate the range is unbounded on that side. For
# example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
# start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
# 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
# start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
# start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
# start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
# sheet_id:0` The start index must always be less than or equal to the end index.
# If the start index equals the end index, then the range is empty. Empty
# ranges are typically not meaningful and are usually rendered in the UI as `#
# REF!`.
# Corresponds to the JSON property `gridRange`
# @return [Google::Apis::SheetsV4::GridRange]
attr_accessor :grid_range
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@a1_range = args[:a1_range] if args.key?(:a1_range)
@developer_metadata_lookup = args[:developer_metadata_lookup] if args.key?(:developer_metadata_lookup)
@grid_range = args[:grid_range] if args.key?(:grid_range)
end
end
# A range of values whose location is specified by a DataFilter.
class DataFilterValueRange
include Google::Apis::Core::Hashable
# Filter that describes what data should be selected or returned from a request.
# Corresponds to the JSON property `dataFilter`
# @return [Google::Apis::SheetsV4::DataFilter]
attr_accessor :data_filter
# The major dimension of the values.
# Corresponds to the JSON property `majorDimension`
# @return [String]
attr_accessor :major_dimension
# The data to be written. If the provided values exceed any of the ranges
# matched by the data filter then the request fails. If the provided values are
# less than the matched ranges only the specified values are written, existing
# values in the matched ranges remain unaffected.
# Corresponds to the JSON property `values`
# @return [Array<Array<Object>>]
attr_accessor :values
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data_filter = args[:data_filter] if args.key?(:data_filter)
@major_dimension = args[:major_dimension] if args.key?(:major_dimension)
@values = args[:values] if args.key?(:values)
end
end
# Settings for one set of data labels. Data labels are annotations that appear
# next to a set of data, such as the points on a line chart, and provide
# additional information about what the data represents, such as a text
# representation of the value behind that point on the graph.
class DataLabel
include Google::Apis::Core::Hashable
# The data included in a domain or series.
# Corresponds to the JSON property `customLabelData`
# @return [Google::Apis::SheetsV4::ChartData]
attr_accessor :custom_label_data
# The placement of the data label relative to the labeled data.
# Corresponds to the JSON property `placement`
# @return [String]
attr_accessor :placement
# The format of a run of text in a cell. Absent values indicate that the field
# isn't specified.
# Corresponds to the JSON property `textFormat`
# @return [Google::Apis::SheetsV4::TextFormat]
attr_accessor :text_format
# The type of the data label.
# Corresponds to the JSON property `type`
# @return [String]
attr_accessor :type
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@custom_label_data = args[:custom_label_data] if args.key?(:custom_label_data)
@placement = args[:placement] if args.key?(:placement)
@text_format = args[:text_format] if args.key?(:text_format)
@type = args[:type] if args.key?(:type)
end
end
# Information about an external data source in the spreadsheet.
class DataSource
include Google::Apis::Core::Hashable
# All calculated columns in the data source.
# Corresponds to the JSON property `calculatedColumns`
# @return [Array<Google::Apis::SheetsV4::DataSourceColumn>]
attr_accessor :calculated_columns
# The spreadsheet-scoped unique ID that identifies the data source. Example:
# 1080547365.
# Corresponds to the JSON property `dataSourceId`
# @return [String]
attr_accessor :data_source_id
# The ID of the Sheet connected with the data source. The field cannot be
# changed once set. When creating a data source, an associated DATA_SOURCE sheet
# is also created, if the field is not specified, the ID of the created sheet
# will be randomly generated.
# Corresponds to the JSON property `sheetId`
# @return [Fixnum]
attr_accessor :sheet_id
# This specifies the details of the data source. For example, for BigQuery, this
# specifies information about the BigQuery source.
# Corresponds to the JSON property `spec`
# @return [Google::Apis::SheetsV4::DataSourceSpec]
attr_accessor :spec
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@calculated_columns = args[:calculated_columns] if args.key?(:calculated_columns)
@data_source_id = args[:data_source_id] if args.key?(:data_source_id)
@sheet_id = args[:sheet_id] if args.key?(:sheet_id)
@spec = args[:spec] if args.key?(:spec)
end
end
# Properties of a data source chart.
class DataSourceChartProperties
include Google::Apis::Core::Hashable
# The data execution status. A data execution is created to sync a data source
# object with the latest data from a DataSource. It is usually scheduled to run
# at background, you can check its state to tell if an execution completes There
# are several scenarios where a data execution is triggered to run: * Adding a
# data source creates an associated data source sheet as well as a data
# execution to sync the data from the data source to the sheet. * Updating a
# data source creates a data execution to refresh the associated data source
# sheet similarly. * You can send refresh request to explicitly refresh one or
# multiple data source objects.
# Corresponds to the JSON property `dataExecutionStatus`
# @return [Google::Apis::SheetsV4::DataExecutionStatus]
attr_accessor :data_execution_status
# ID of the data source that the chart is associated with.
# Corresponds to the JSON property `dataSourceId`
# @return [String]
attr_accessor :data_source_id
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data_execution_status = args[:data_execution_status] if args.key?(:data_execution_status)
@data_source_id = args[:data_source_id] if args.key?(:data_source_id)
end
end
# A column in a data source.
class DataSourceColumn
include Google::Apis::Core::Hashable
# The formula of the calculated column.
# Corresponds to the JSON property `formula`
# @return [String]
attr_accessor :formula
# An unique identifier that references a data source column.
# Corresponds to the JSON property `reference`
# @return [Google::Apis::SheetsV4::DataSourceColumnReference]
attr_accessor :reference
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@formula = args[:formula] if args.key?(:formula)
@reference = args[:reference] if args.key?(:reference)
end
end
# An unique identifier that references a data source column.
class DataSourceColumnReference
include Google::Apis::Core::Hashable
# The display name of the column. It should be unique within a data source.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@name = args[:name] if args.key?(:name)
end
end
# A data source formula.
class DataSourceFormula
include Google::Apis::Core::Hashable
# The data execution status. A data execution is created to sync a data source
# object with the latest data from a DataSource. It is usually scheduled to run
# at background, you can check its state to tell if an execution completes There
# are several scenarios where a data execution is triggered to run: * Adding a
# data source creates an associated data source sheet as well as a data
# execution to sync the data from the data source to the sheet. * Updating a
# data source creates a data execution to refresh the associated data source
# sheet similarly. * You can send refresh request to explicitly refresh one or
# multiple data source objects.
# Corresponds to the JSON property `dataExecutionStatus`
# @return [Google::Apis::SheetsV4::DataExecutionStatus]
attr_accessor :data_execution_status
# The ID of the data source the formula is associated with.
# Corresponds to the JSON property `dataSourceId`
# @return [String]
attr_accessor :data_source_id
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data_execution_status = args[:data_execution_status] if args.key?(:data_execution_status)
@data_source_id = args[:data_source_id] if args.key?(:data_source_id)
end
end
# Reference to a data source object.
class DataSourceObjectReference
include Google::Apis::Core::Hashable
# References to a data source chart.
# Corresponds to the JSON property `chartId`
# @return [Fixnum]
attr_accessor :chart_id
# A coordinate in a sheet. All indexes are zero-based.
# Corresponds to the JSON property `dataSourceFormulaCell`
# @return [Google::Apis::SheetsV4::GridCoordinate]
attr_accessor :data_source_formula_cell
# A coordinate in a sheet. All indexes are zero-based.
# Corresponds to the JSON property `dataSourcePivotTableAnchorCell`
# @return [Google::Apis::SheetsV4::GridCoordinate]
attr_accessor :data_source_pivot_table_anchor_cell
# A coordinate in a sheet. All indexes are zero-based.
# Corresponds to the JSON property `dataSourceTableAnchorCell`
# @return [Google::Apis::SheetsV4::GridCoordinate]
attr_accessor :data_source_table_anchor_cell
# References to a DATA_SOURCE sheet.
# Corresponds to the JSON property `sheetId`
# @return [String]
attr_accessor :sheet_id
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@chart_id = args[:chart_id] if args.key?(:chart_id)
@data_source_formula_cell = args[:data_source_formula_cell] if args.key?(:data_source_formula_cell)
@data_source_pivot_table_anchor_cell = args[:data_source_pivot_table_anchor_cell] if args.key?(:data_source_pivot_table_anchor_cell)
@data_source_table_anchor_cell = args[:data_source_table_anchor_cell] if args.key?(:data_source_table_anchor_cell)
@sheet_id = args[:sheet_id] if args.key?(:sheet_id)
end
end
# A list of references to data source objects.
class DataSourceObjectReferences
include Google::Apis::Core::Hashable
# The references.
# Corresponds to the JSON property `references`
# @return [Array<Google::Apis::SheetsV4::DataSourceObjectReference>]
attr_accessor :references
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@references = args[:references] if args.key?(:references)
end
end
# A parameter in a data source's query. The parameter allows the user to pass in
# values from the spreadsheet into a query.
class DataSourceParameter
include Google::Apis::Core::Hashable
# Named parameter. Must be a legitimate identifier for the DataSource that
# supports it. For example, [BigQuery identifier](https://cloud.google.com/
# bigquery/docs/reference/standard-sql/lexical#identifiers).
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# ID of a NamedRange. Its size must be 1x1.
# Corresponds to the JSON property `namedRangeId`
# @return [String]
attr_accessor :named_range_id
# A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
# the start index is inclusive and the end index is exclusive -- [start_index,
# end_index). Missing indexes indicate the range is unbounded on that side. For
# example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
# start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
# 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
# start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
# start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
# start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
# sheet_id:0` The start index must always be less than or equal to the end index.
# If the start index equals the end index, then the range is empty. Empty
# ranges are typically not meaningful and are usually rendered in the UI as `#
# REF!`.
# Corresponds to the JSON property `range`
# @return [Google::Apis::SheetsV4::GridRange]
attr_accessor :range
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@name = args[:name] if args.key?(:name)
@named_range_id = args[:named_range_id] if args.key?(:named_range_id)
@range = args[:range] if args.key?(:range)
end
end
# A schedule for data to refresh every day in a given time interval.
class DataSourceRefreshDailySchedule
include Google::Apis::Core::Hashable
# Represents a time of day. The date and time zone are either not significant or
# are specified elsewhere. An API may choose to allow leap seconds. Related
# types are google.type.Date and `google.protobuf.Timestamp`.
# Corresponds to the JSON property `startTime`
# @return [Google::Apis::SheetsV4::TimeOfDay]
attr_accessor :start_time
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@start_time = args[:start_time] if args.key?(:start_time)
end
end
# A monthly schedule for data to refresh on specific days in the month in a
# given time interval.
class DataSourceRefreshMonthlySchedule
include Google::Apis::Core::Hashable
# Days of the month to refresh. Only 1-28 are supported, mapping to the 1st to
# the 28th day. At lesat one day must be specified.
# Corresponds to the JSON property `daysOfMonth`
# @return [Array<Fixnum>]
attr_accessor :days_of_month
# Represents a time of day. The date and time zone are either not significant or
# are specified elsewhere. An API may choose to allow leap seconds. Related
# types are google.type.Date and `google.protobuf.Timestamp`.
# Corresponds to the JSON property `startTime`
# @return [Google::Apis::SheetsV4::TimeOfDay]
attr_accessor :start_time
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@days_of_month = args[:days_of_month] if args.key?(:days_of_month)
@start_time = args[:start_time] if args.key?(:start_time)
end
end
# Schedule for refreshing the data source. Data sources in the spreadsheet are
# refreshed within a time interval. You can specify the start time by clicking
# the Scheduled Refresh button in the Sheets editor, but the interval is fixed
# at 4 hours. For example, if you specify a start time of 8am , the refresh will
# take place between 8am and 12pm every day.
class DataSourceRefreshSchedule
include Google::Apis::Core::Hashable
# A schedule for data to refresh every day in a given time interval.
# Corresponds to the JSON property `dailySchedule`
# @return [Google::Apis::SheetsV4::DataSourceRefreshDailySchedule]
attr_accessor :daily_schedule
# True if the refresh schedule is enabled, or false otherwise.
# Corresponds to the JSON property `enabled`
# @return [Boolean]
attr_accessor :enabled
alias_method :enabled?, :enabled
# A monthly schedule for data to refresh on specific days in the month in a
# given time interval.
# Corresponds to the JSON property `monthlySchedule`
# @return [Google::Apis::SheetsV4::DataSourceRefreshMonthlySchedule]
attr_accessor :monthly_schedule
# Represents a time interval, encoded as a Timestamp start (inclusive) and a
# Timestamp end (exclusive). The start must be less than or equal to the end.
# When the start equals the end, the interval is empty (matches no time). When
# both start and end are unspecified, the interval matches any time.
# Corresponds to the JSON property `nextRun`
# @return [Google::Apis::SheetsV4::Interval]
attr_accessor :next_run
# The scope of the refresh. Must be ALL_DATA_SOURCES.
# Corresponds to the JSON property `refreshScope`
# @return [String]
attr_accessor :refresh_scope
# A weekly schedule for data to refresh on specific days in a given time
# interval.
# Corresponds to the JSON property `weeklySchedule`
# @return [Google::Apis::SheetsV4::DataSourceRefreshWeeklySchedule]
attr_accessor :weekly_schedule
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@daily_schedule = args[:daily_schedule] if args.key?(:daily_schedule)
@enabled = args[:enabled] if args.key?(:enabled)
@monthly_schedule = args[:monthly_schedule] if args.key?(:monthly_schedule)
@next_run = args[:next_run] if args.key?(:next_run)
@refresh_scope = args[:refresh_scope] if args.key?(:refresh_scope)
@weekly_schedule = args[:weekly_schedule] if args.key?(:weekly_schedule)
end
end
# A weekly schedule for data to refresh on specific days in a given time
# interval.
class DataSourceRefreshWeeklySchedule
include Google::Apis::Core::Hashable
# Days of the week to refresh. At least one day must be specified.
# Corresponds to the JSON property `daysOfWeek`
# @return [Array<String>]
attr_accessor :days_of_week
# Represents a time of day. The date and time zone are either not significant or
# are specified elsewhere. An API may choose to allow leap seconds. Related
# types are google.type.Date and `google.protobuf.Timestamp`.
# Corresponds to the JSON property `startTime`
# @return [Google::Apis::SheetsV4::TimeOfDay]
attr_accessor :start_time
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@days_of_week = args[:days_of_week] if args.key?(:days_of_week)
@start_time = args[:start_time] if args.key?(:start_time)
end
end
# A range along a single dimension on a DATA_SOURCE sheet.
class DataSourceSheetDimensionRange
include Google::Apis::Core::Hashable
# The columns on the data source sheet.
# Corresponds to the JSON property `columnReferences`
# @return [Array<Google::Apis::SheetsV4::DataSourceColumnReference>]
attr_accessor :column_references
# The ID of the data source sheet the range is on.
# Corresponds to the JSON property `sheetId`
# @return [Fixnum]
attr_accessor :sheet_id
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@column_references = args[:column_references] if args.key?(:column_references)
@sheet_id = args[:sheet_id] if args.key?(:sheet_id)
end
end
# Additional properties of a DATA_SOURCE sheet.
class DataSourceSheetProperties
include Google::Apis::Core::Hashable
# The columns displayed on the sheet, corresponding to the values in RowData.
# Corresponds to the JSON property `columns`
# @return [Array<Google::Apis::SheetsV4::DataSourceColumn>]
attr_accessor :columns
# The data execution status. A data execution is created to sync a data source
# object with the latest data from a DataSource. It is usually scheduled to run
# at background, you can check its state to tell if an execution completes There
# are several scenarios where a data execution is triggered to run: * Adding a
# data source creates an associated data source sheet as well as a data
# execution to sync the data from the data source to the sheet. * Updating a
# data source creates a data execution to refresh the associated data source
# sheet similarly. * You can send refresh request to explicitly refresh one or
# multiple data source objects.
# Corresponds to the JSON property `dataExecutionStatus`
# @return [Google::Apis::SheetsV4::DataExecutionStatus]
attr_accessor :data_execution_status
# ID of the DataSource the sheet is connected to.
# Corresponds to the JSON property `dataSourceId`
# @return [String]
attr_accessor :data_source_id
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@columns = args[:columns] if args.key?(:columns)
@data_execution_status = args[:data_execution_status] if args.key?(:data_execution_status)
@data_source_id = args[:data_source_id] if args.key?(:data_source_id)
end
end
# This specifies the details of the data source. For example, for BigQuery, this
# specifies information about the BigQuery source.
class DataSourceSpec
include Google::Apis::Core::Hashable
# The specification of a BigQuery data source that's connected to a sheet.
# Corresponds to the JSON property `bigQuery`
# @return [Google::Apis::SheetsV4::BigQueryDataSourceSpec]
attr_accessor :big_query
# The parameters of the data source, used when querying the data source.
# Corresponds to the JSON property `parameters`
# @return [Array<Google::Apis::SheetsV4::DataSourceParameter>]
attr_accessor :parameters
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@big_query = args[:big_query] if args.key?(:big_query)
@parameters = args[:parameters] if args.key?(:parameters)
end
end
# A data source table, which allows the user to import a static table of data
# from the DataSource into Sheets. This is also known as "Extract" in the Sheets
# editor.
class DataSourceTable
include Google::Apis::Core::Hashable
# The type to select columns for the data source table. Defaults to SELECTED.
# Corresponds to the JSON property `columnSelectionType`
# @return [String]
attr_accessor :column_selection_type
# Columns selected for the data source table. The column_selection_type must be
# SELECTED.
# Corresponds to the JSON property `columns`
# @return [Array<Google::Apis::SheetsV4::DataSourceColumnReference>]
attr_accessor :columns
# The data execution status. A data execution is created to sync a data source
# object with the latest data from a DataSource. It is usually scheduled to run
# at background, you can check its state to tell if an execution completes There
# are several scenarios where a data execution is triggered to run: * Adding a
# data source creates an associated data source sheet as well as a data
# execution to sync the data from the data source to the sheet. * Updating a
# data source creates a data execution to refresh the associated data source
# sheet similarly. * You can send refresh request to explicitly refresh one or
# multiple data source objects.
# Corresponds to the JSON property `dataExecutionStatus`
# @return [Google::Apis::SheetsV4::DataExecutionStatus]
attr_accessor :data_execution_status
# The ID of the data source the data source table is associated with.
# Corresponds to the JSON property `dataSourceId`
# @return [String]
attr_accessor :data_source_id
# Filter specifications in the data source table.
# Corresponds to the JSON property `filterSpecs`
# @return [Array<Google::Apis::SheetsV4::FilterSpec>]
attr_accessor :filter_specs
# The limit of rows to return. If not set, a default limit is applied. Please
# refer to the Sheets editor for the default and max limit.
# Corresponds to the JSON property `rowLimit`
# @return [Fixnum]
attr_accessor :row_limit
# Sort specifications in the data source table. The result of the data source
# table is sorted based on the sort specifications in order.
# Corresponds to the JSON property `sortSpecs`
# @return [Array<Google::Apis::SheetsV4::SortSpec>]
attr_accessor :sort_specs
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@column_selection_type = args[:column_selection_type] if args.key?(:column_selection_type)
@columns = args[:columns] if args.key?(:columns)
@data_execution_status = args[:data_execution_status] if args.key?(:data_execution_status)
@data_source_id = args[:data_source_id] if args.key?(:data_source_id)
@filter_specs = args[:filter_specs] if args.key?(:filter_specs)
@row_limit = args[:row_limit] if args.key?(:row_limit)
@sort_specs = args[:sort_specs] if args.key?(:sort_specs)
end
end
# A data validation rule.
class DataValidationRule
include Google::Apis::Core::Hashable
# A condition that can evaluate to true or false. BooleanConditions are used by
# conditional formatting, data validation, and the criteria in filters.
# Corresponds to the JSON property `condition`
# @return [Google::Apis::SheetsV4::BooleanCondition]
attr_accessor :condition
# A message to show the user when adding data to the cell.
# Corresponds to the JSON property `inputMessage`
# @return [String]
attr_accessor :input_message
# True if the UI should be customized based on the kind of condition. If true, "
# List" conditions will show a dropdown.
# Corresponds to the JSON property `showCustomUi`
# @return [Boolean]
attr_accessor :show_custom_ui
alias_method :show_custom_ui?, :show_custom_ui
# True if invalid data should be rejected.
# Corresponds to the JSON property `strict`
# @return [Boolean]
attr_accessor :strict
alias_method :strict?, :strict
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@condition = args[:condition] if args.key?(:condition)
@input_message = args[:input_message] if args.key?(:input_message)
@show_custom_ui = args[:show_custom_ui] if args.key?(:show_custom_ui)
@strict = args[:strict] if args.key?(:strict)
end
end
# Allows you to organize the date-time values in a source data column into
# buckets based on selected parts of their date or time values. For example,
# consider a pivot table showing sales transactions by date: +----------+--------
# ------+ | Date | SUM of Sales | +----------+--------------+ | 1/1/2017 | $621.
# 14 | | 2/3/2017 | $708.84 | | 5/8/2017 | $326.84 | ... +----------+------------
# --+ Applying a date-time group rule with a DateTimeRuleType of YEAR_MONTH
# results in the following pivot table. +--------------+--------------+ |
# Grouped Date | SUM of Sales | +--------------+--------------+ | 2017-Jan | $53,
# 731.78 | | 2017-Feb | $83,475.32 | | 2017-Mar | $94,385.05 | ... +-------------
# -+--------------+
class DateTimeRule
include Google::Apis::Core::Hashable
# The type of date-time grouping to apply.
# Corresponds to the JSON property `type`
# @return [String]
attr_accessor :type
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@type = args[:type] if args.key?(:type)
end
end
# Removes the banded range with the given ID from the spreadsheet.
class DeleteBandingRequest
include Google::Apis::Core::Hashable
# The ID of the banded range to delete.
# Corresponds to the JSON property `bandedRangeId`
# @return [Fixnum]
attr_accessor :banded_range_id
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@banded_range_id = args[:banded_range_id] if args.key?(:banded_range_id)
end
end
# Deletes a conditional format rule at the given index. All subsequent rules'
# indexes are decremented.
class DeleteConditionalFormatRuleRequest
include Google::Apis::Core::Hashable
# The zero-based index of the rule to be deleted.
# Corresponds to the JSON property `index`
# @return [Fixnum]
attr_accessor :index
# The sheet the rule is being deleted from.
# Corresponds to the JSON property `sheetId`
# @return [Fixnum]
attr_accessor :sheet_id
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@index = args[:index] if args.key?(:index)
@sheet_id = args[:sheet_id] if args.key?(:sheet_id)
end
end
# The result of deleting a conditional format rule.
class DeleteConditionalFormatRuleResponse
include Google::Apis::Core::Hashable
# A rule describing a conditional format.
# Corresponds to the JSON property `rule`
# @return [Google::Apis::SheetsV4::ConditionalFormatRule]
attr_accessor :rule
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@rule = args[:rule] if args.key?(:rule)
end
end
# Deletes a data source. The request also deletes the associated data source
# sheet, and unlinks all associated data source objects.
class DeleteDataSourceRequest
include Google::Apis::Core::Hashable
# The ID of the data source to delete.
# Corresponds to the JSON property `dataSourceId`
# @return [String]
attr_accessor :data_source_id
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data_source_id = args[:data_source_id] if args.key?(:data_source_id)
end
end
# A request to delete developer metadata.
class DeleteDeveloperMetadataRequest
include Google::Apis::Core::Hashable
# Filter that describes what data should be selected or returned from a request.
# Corresponds to the JSON property `dataFilter`
# @return [Google::Apis::SheetsV4::DataFilter]
attr_accessor :data_filter
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data_filter = args[:data_filter] if args.key?(:data_filter)
end
end
# The response from deleting developer metadata.
class DeleteDeveloperMetadataResponse
include Google::Apis::Core::Hashable
# The metadata that was deleted.
# Corresponds to the JSON property `deletedDeveloperMetadata`
# @return [Array<Google::Apis::SheetsV4::DeveloperMetadata>]
attr_accessor :deleted_developer_metadata
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@deleted_developer_metadata = args[:deleted_developer_metadata] if args.key?(:deleted_developer_metadata)
end
end
# Deletes a group over the specified range by decrementing the depth of the
# dimensions in the range. For example, assume the sheet has a depth-1 group
# over B:E and a depth-2 group over C:D. Deleting a group over D:E leaves the
# sheet with a depth-1 group over B:D and a depth-2 group over C:C.
class DeleteDimensionGroupRequest
include Google::Apis::Core::Hashable
# A range along a single dimension on a sheet. All indexes are zero-based.
# Indexes are half open: the start index is inclusive and the end index is
# exclusive. Missing indexes indicate the range is unbounded on that side.
# Corresponds to the JSON property `range`
# @return [Google::Apis::SheetsV4::DimensionRange]
attr_accessor :range
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@range = args[:range] if args.key?(:range)
end
end
# The result of deleting a group.
class DeleteDimensionGroupResponse
include Google::Apis::Core::Hashable
# All groups of a dimension after deleting a group from that dimension.
# Corresponds to the JSON property `dimensionGroups`
# @return [Array<Google::Apis::SheetsV4::DimensionGroup>]
attr_accessor :dimension_groups
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@dimension_groups = args[:dimension_groups] if args.key?(:dimension_groups)
end
end
# Deletes the dimensions from the sheet.
class DeleteDimensionRequest
include Google::Apis::Core::Hashable
# A range along a single dimension on a sheet. All indexes are zero-based.
# Indexes are half open: the start index is inclusive and the end index is
# exclusive. Missing indexes indicate the range is unbounded on that side.
# Corresponds to the JSON property `range`
# @return [Google::Apis::SheetsV4::DimensionRange]
attr_accessor :range
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@range = args[:range] if args.key?(:range)
end
end
# Removes rows within this range that contain values in the specified columns
# that are duplicates of values in any previous row. Rows with identical values
# but different letter cases, formatting, or formulas are considered to be
# duplicates. This request also removes duplicate rows hidden from view (for
# example, due to a filter). When removing duplicates, the first instance of
# each duplicate row scanning from the top downwards is kept in the resulting
# range. Content outside of the specified range isn't removed, and rows
# considered duplicates do not have to be adjacent to each other in the range.
class DeleteDuplicatesRequest
include Google::Apis::Core::Hashable
# The columns in the range to analyze for duplicate values. If no columns are
# selected then all columns are analyzed for duplicates.
# Corresponds to the JSON property `comparisonColumns`
# @return [Array<Google::Apis::SheetsV4::DimensionRange>]
attr_accessor :comparison_columns
# A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
# the start index is inclusive and the end index is exclusive -- [start_index,
# end_index). Missing indexes indicate the range is unbounded on that side. For
# example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
# start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
# 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
# start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
# start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
# start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
# sheet_id:0` The start index must always be less than or equal to the end index.
# If the start index equals the end index, then the range is empty. Empty
# ranges are typically not meaningful and are usually rendered in the UI as `#
# REF!`.
# Corresponds to the JSON property `range`
# @return [Google::Apis::SheetsV4::GridRange]
attr_accessor :range
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@comparison_columns = args[:comparison_columns] if args.key?(:comparison_columns)
@range = args[:range] if args.key?(:range)
end
end
# The result of removing duplicates in a range.
class DeleteDuplicatesResponse
include Google::Apis::Core::Hashable
# The number of duplicate rows removed.
# Corresponds to the JSON property `duplicatesRemovedCount`
# @return [Fixnum]
attr_accessor :duplicates_removed_count
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@duplicates_removed_count = args[:duplicates_removed_count] if args.key?(:duplicates_removed_count)
end
end
# Deletes the embedded object with the given ID.
class DeleteEmbeddedObjectRequest
include Google::Apis::Core::Hashable
# The ID of the embedded object to delete.
# Corresponds to the JSON property `objectId`
# @return [Fixnum]
attr_accessor :object_id_prop
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@object_id_prop = args[:object_id_prop] if args.key?(:object_id_prop)
end
end
# Deletes a particular filter view.
class DeleteFilterViewRequest
include Google::Apis::Core::Hashable
# The ID of the filter to delete.
# Corresponds to the JSON property `filterId`
# @return [Fixnum]
attr_accessor :filter_id
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@filter_id = args[:filter_id] if args.key?(:filter_id)
end
end
# Removes the named range with the given ID from the spreadsheet.
class DeleteNamedRangeRequest
include Google::Apis::Core::Hashable
# The ID of the named range to delete.
# Corresponds to the JSON property `namedRangeId`
# @return [String]
attr_accessor :named_range_id
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@named_range_id = args[:named_range_id] if args.key?(:named_range_id)
end
end
# Deletes the protected range with the given ID.
class DeleteProtectedRangeRequest
include Google::Apis::Core::Hashable
# The ID of the protected range to delete.
# Corresponds to the JSON property `protectedRangeId`
# @return [Fixnum]
attr_accessor :protected_range_id
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@protected_range_id = args[:protected_range_id] if args.key?(:protected_range_id)
end
end
# Deletes a range of cells, shifting other cells into the deleted area.
class DeleteRangeRequest
include Google::Apis::Core::Hashable
# A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
# the start index is inclusive and the end index is exclusive -- [start_index,
# end_index). Missing indexes indicate the range is unbounded on that side. For
# example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
# start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
# 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
# start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
# start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
# start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
# sheet_id:0` The start index must always be less than or equal to the end index.
# If the start index equals the end index, then the range is empty. Empty
# ranges are typically not meaningful and are usually rendered in the UI as `#
# REF!`.
# Corresponds to the JSON property `range`
# @return [Google::Apis::SheetsV4::GridRange]
attr_accessor :range
# The dimension from which deleted cells will be replaced with. If ROWS,
# existing cells will be shifted upward to replace the deleted cells. If COLUMNS,
# existing cells will be shifted left to replace the deleted cells.
# Corresponds to the JSON property `shiftDimension`
# @return [String]
attr_accessor :shift_dimension
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@range = args[:range] if args.key?(:range)
@shift_dimension = args[:shift_dimension] if args.key?(:shift_dimension)
end
end
# Deletes the requested sheet.
class DeleteSheetRequest
include Google::Apis::Core::Hashable
# The ID of the sheet to delete. If the sheet is of SheetType.DATA_SOURCE type,
# the associated DataSource is also deleted.
# Corresponds to the JSON property `sheetId`
# @return [Fixnum]
attr_accessor :sheet_id
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@sheet_id = args[:sheet_id] if args.key?(:sheet_id)
end
end
# Developer metadata associated with a location or object in a spreadsheet.
# Developer metadata may be used to associate arbitrary data with various parts
# of a spreadsheet and will remain associated at those locations as they move
# around and the spreadsheet is edited. For example, if developer metadata is
# associated with row 5 and another row is then subsequently inserted above row
# 5, that original metadata will still be associated with the row it was first
# associated with (what is now row 6). If the associated object is deleted its
# metadata is deleted too.
class DeveloperMetadata
include Google::Apis::Core::Hashable
# A location where metadata may be associated in a spreadsheet.
# Corresponds to the JSON property `location`
# @return [Google::Apis::SheetsV4::DeveloperMetadataLocation]
attr_accessor :location
# The spreadsheet-scoped unique ID that identifies the metadata. IDs may be
# specified when metadata is created, otherwise one will be randomly generated
# and assigned. Must be positive.
# Corresponds to the JSON property `metadataId`
# @return [Fixnum]
attr_accessor :metadata_id
# The metadata key. There may be multiple metadata in a spreadsheet with the
# same key. Developer metadata must always have a key specified.
# Corresponds to the JSON property `metadataKey`
# @return [String]
attr_accessor :metadata_key
# Data associated with the metadata's key.
# Corresponds to the JSON property `metadataValue`
# @return [String]
attr_accessor :metadata_value
# The metadata visibility. Developer metadata must always have a visibility
# specified.
# Corresponds to the JSON property `visibility`
# @return [String]
attr_accessor :visibility
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@location = args[:location] if args.key?(:location)
@metadata_id = args[:metadata_id] if args.key?(:metadata_id)
@metadata_key = args[:metadata_key] if args.key?(:metadata_key)
@metadata_value = args[:metadata_value] if args.key?(:metadata_value)
@visibility = args[:visibility] if args.key?(:visibility)
end
end
# A location where metadata may be associated in a spreadsheet.
class DeveloperMetadataLocation
include Google::Apis::Core::Hashable
# A range along a single dimension on a sheet. All indexes are zero-based.
# Indexes are half open: the start index is inclusive and the end index is
# exclusive. Missing indexes indicate the range is unbounded on that side.
# Corresponds to the JSON property `dimensionRange`
# @return [Google::Apis::SheetsV4::DimensionRange]
attr_accessor :dimension_range
# The type of location this object represents. This field is read-only.
# Corresponds to the JSON property `locationType`
# @return [String]
attr_accessor :location_type
# The ID of the sheet when metadata is associated with an entire sheet.
# Corresponds to the JSON property `sheetId`
# @return [Fixnum]
attr_accessor :sheet_id
# True when metadata is associated with an entire spreadsheet.
# Corresponds to the JSON property `spreadsheet`
# @return [Boolean]
attr_accessor :spreadsheet
alias_method :spreadsheet?, :spreadsheet
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@dimension_range = args[:dimension_range] if args.key?(:dimension_range)
@location_type = args[:location_type] if args.key?(:location_type)
@sheet_id = args[:sheet_id] if args.key?(:sheet_id)
@spreadsheet = args[:spreadsheet] if args.key?(:spreadsheet)
end
end
# Selects DeveloperMetadata that matches all of the specified fields. For
# example, if only a metadata ID is specified this considers the
# DeveloperMetadata with that particular unique ID. If a metadata key is
# specified, this considers all developer metadata with that key. If a key,
# visibility, and location type are all specified, this considers all developer
# metadata with that key and visibility that are associated with a location of
# that type. In general, this selects all DeveloperMetadata that matches the
# intersection of all the specified fields; any field or combination of fields
# may be specified.
class DeveloperMetadataLookup
include Google::Apis::Core::Hashable
# Determines how this lookup matches the location. If this field is specified as
# EXACT, only developer metadata associated on the exact location specified is
# matched. If this field is specified to INTERSECTING, developer metadata
# associated on intersecting locations is also matched. If left unspecified,
# this field assumes a default value of INTERSECTING. If this field is specified,
# a metadataLocation must also be specified.
# Corresponds to the JSON property `locationMatchingStrategy`
# @return [String]
attr_accessor :location_matching_strategy
# Limits the selected developer metadata to those entries which are associated
# with locations of the specified type. For example, when this field is
# specified as ROW this lookup only considers developer metadata associated on
# rows. If the field is left unspecified, all location types are considered.
# This field cannot be specified as SPREADSHEET when the
# locationMatchingStrategy is specified as INTERSECTING or when the
# metadataLocation is specified as a non-spreadsheet location: spreadsheet
# metadata cannot intersect any other developer metadata location. This field
# also must be left unspecified when the locationMatchingStrategy is specified
# as EXACT.
# Corresponds to the JSON property `locationType`
# @return [String]
attr_accessor :location_type
# Limits the selected developer metadata to that which has a matching
# DeveloperMetadata.metadata_id.
# Corresponds to the JSON property `metadataId`
# @return [Fixnum]
attr_accessor :metadata_id
# Limits the selected developer metadata to that which has a matching
# DeveloperMetadata.metadata_key.
# Corresponds to the JSON property `metadataKey`
# @return [String]
attr_accessor :metadata_key
# A location where metadata may be associated in a spreadsheet.
# Corresponds to the JSON property `metadataLocation`
# @return [Google::Apis::SheetsV4::DeveloperMetadataLocation]
attr_accessor :metadata_location
# Limits the selected developer metadata to that which has a matching
# DeveloperMetadata.metadata_value.
# Corresponds to the JSON property `metadataValue`
# @return [String]
attr_accessor :metadata_value
# Limits the selected developer metadata to that which has a matching
# DeveloperMetadata.visibility. If left unspecified, all developer metadata
# visibile to the requesting project is considered.
# Corresponds to the JSON property `visibility`
# @return [String]
attr_accessor :visibility
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@location_matching_strategy = args[:location_matching_strategy] if args.key?(:location_matching_strategy)
@location_type = args[:location_type] if args.key?(:location_type)
@metadata_id = args[:metadata_id] if args.key?(:metadata_id)
@metadata_key = args[:metadata_key] if args.key?(:metadata_key)
@metadata_location = args[:metadata_location] if args.key?(:metadata_location)
@metadata_value = args[:metadata_value] if args.key?(:metadata_value)
@visibility = args[:visibility] if args.key?(:visibility)
end
end
# A group over an interval of rows or columns on a sheet, which can contain or
# be contained within other groups. A group can be collapsed or expanded as a
# unit on the sheet.
class DimensionGroup
include Google::Apis::Core::Hashable
# This field is true if this group is collapsed. A collapsed group remains
# collapsed if an overlapping group at a shallower depth is expanded. A true
# value does not imply that all dimensions within the group are hidden, since a
# dimension's visibility can change independently from this group property.
# However, when this property is updated, all dimensions within it are set to
# hidden if this field is true, or set to visible if this field is false.
# Corresponds to the JSON property `collapsed`
# @return [Boolean]
attr_accessor :collapsed
alias_method :collapsed?, :collapsed
# The depth of the group, representing how many groups have a range that wholly
# contains the range of this group.
# Corresponds to the JSON property `depth`
# @return [Fixnum]
attr_accessor :depth
# A range along a single dimension on a sheet. All indexes are zero-based.
# Indexes are half open: the start index is inclusive and the end index is
# exclusive. Missing indexes indicate the range is unbounded on that side.
# Corresponds to the JSON property `range`
# @return [Google::Apis::SheetsV4::DimensionRange]
attr_accessor :range
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@collapsed = args[:collapsed] if args.key?(:collapsed)
@depth = args[:depth] if args.key?(:depth)
@range = args[:range] if args.key?(:range)
end
end
# Properties about a dimension.
class DimensionProperties
include Google::Apis::Core::Hashable
# An unique identifier that references a data source column.
# Corresponds to the JSON property `dataSourceColumnReference`
# @return [Google::Apis::SheetsV4::DataSourceColumnReference]
attr_accessor :data_source_column_reference
# The developer metadata associated with a single row or column.
# Corresponds to the JSON property `developerMetadata`
# @return [Array<Google::Apis::SheetsV4::DeveloperMetadata>]
attr_accessor :developer_metadata
# True if this dimension is being filtered. This field is read-only.
# Corresponds to the JSON property `hiddenByFilter`
# @return [Boolean]
attr_accessor :hidden_by_filter
alias_method :hidden_by_filter?, :hidden_by_filter
# True if this dimension is explicitly hidden.
# Corresponds to the JSON property `hiddenByUser`
# @return [Boolean]
attr_accessor :hidden_by_user
alias_method :hidden_by_user?, :hidden_by_user
# The height (if a row) or width (if a column) of the dimension in pixels.
# Corresponds to the JSON property `pixelSize`
# @return [Fixnum]
attr_accessor :pixel_size
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data_source_column_reference = args[:data_source_column_reference] if args.key?(:data_source_column_reference)
@developer_metadata = args[:developer_metadata] if args.key?(:developer_metadata)
@hidden_by_filter = args[:hidden_by_filter] if args.key?(:hidden_by_filter)
@hidden_by_user = args[:hidden_by_user] if args.key?(:hidden_by_user)
@pixel_size = args[:pixel_size] if args.key?(:pixel_size)
end
end
# A range along a single dimension on a sheet. All indexes are zero-based.
# Indexes are half open: the start index is inclusive and the end index is
# exclusive. Missing indexes indicate the range is unbounded on that side.
class DimensionRange
include Google::Apis::Core::Hashable
# The dimension of the span.
# Corresponds to the JSON property `dimension`
# @return [String]
attr_accessor :dimension
# The end (exclusive) of the span, or not set if unbounded.
# Corresponds to the JSON property `endIndex`
# @return [Fixnum]
attr_accessor :end_index
# The sheet this span is on.
# Corresponds to the JSON property `sheetId`
# @return [Fixnum]
attr_accessor :sheet_id
# The start (inclusive) of the span, or not set if unbounded.
# Corresponds to the JSON property `startIndex`
# @return [Fixnum]
attr_accessor :start_index
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@dimension = args[:dimension] if args.key?(:dimension)
@end_index = args[:end_index] if args.key?(:end_index)
@sheet_id = args[:sheet_id] if args.key?(:sheet_id)
@start_index = args[:start_index] if args.key?(:start_index)
end
end
# Duplicates a particular filter view.
class DuplicateFilterViewRequest
include Google::Apis::Core::Hashable
# The ID of the filter being duplicated.
# Corresponds to the JSON property `filterId`
# @return [Fixnum]
attr_accessor :filter_id
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@filter_id = args[:filter_id] if args.key?(:filter_id)
end
end
# The result of a filter view being duplicated.
class DuplicateFilterViewResponse
include Google::Apis::Core::Hashable
# A filter view.
# Corresponds to the JSON property `filter`
# @return [Google::Apis::SheetsV4::FilterView]
attr_accessor :filter
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@filter = args[:filter] if args.key?(:filter)
end
end
# Duplicates the contents of a sheet.
class DuplicateSheetRequest
include Google::Apis::Core::Hashable
# The zero-based index where the new sheet should be inserted. The index of all
# sheets after this are incremented.
# Corresponds to the JSON property `insertSheetIndex`
# @return [Fixnum]
attr_accessor :insert_sheet_index
# If set, the ID of the new sheet. If not set, an ID is chosen. If set, the ID
# must not conflict with any existing sheet ID. If set, it must be non-negative.
# Corresponds to the JSON property `newSheetId`
# @return [Fixnum]
attr_accessor :new_sheet_id
# The name of the new sheet. If empty, a new name is chosen for you.
# Corresponds to the JSON property `newSheetName`
# @return [String]
attr_accessor :new_sheet_name
# The sheet to duplicate. If the source sheet is of DATA_SOURCE type, its
# backing DataSource is also duplicated and associated with the new copy of the
# sheet. No data execution is triggered, the grid data of this sheet is also
# copied over but only available after the batch request completes.
# Corresponds to the JSON property `sourceSheetId`
# @return [Fixnum]
attr_accessor :source_sheet_id
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@insert_sheet_index = args[:insert_sheet_index] if args.key?(:insert_sheet_index)
@new_sheet_id = args[:new_sheet_id] if args.key?(:new_sheet_id)
@new_sheet_name = args[:new_sheet_name] if args.key?(:new_sheet_name)
@source_sheet_id = args[:source_sheet_id] if args.key?(:source_sheet_id)
end
end
# The result of duplicating a sheet.
class DuplicateSheetResponse
include Google::Apis::Core::Hashable
# Properties of a sheet.
# Corresponds to the JSON property `properties`
# @return [Google::Apis::SheetsV4::SheetProperties]
attr_accessor :properties
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@properties = args[:properties] if args.key?(:properties)
end
end
# The editors of a protected range.
class Editors
include Google::Apis::Core::Hashable
# True if anyone in the document's domain has edit access to the protected range.
# Domain protection is only supported on documents within a domain.
# Corresponds to the JSON property `domainUsersCanEdit`
# @return [Boolean]
attr_accessor :domain_users_can_edit
alias_method :domain_users_can_edit?, :domain_users_can_edit
# The email addresses of groups with edit access to the protected range.
# Corresponds to the JSON property `groups`
# @return [Array<String>]
attr_accessor :groups
# The email addresses of users with edit access to the protected range.
# Corresponds to the JSON property `users`
# @return [Array<String>]
attr_accessor :users
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@domain_users_can_edit = args[:domain_users_can_edit] if args.key?(:domain_users_can_edit)
@groups = args[:groups] if args.key?(:groups)
@users = args[:users] if args.key?(:users)
end
end
# A chart embedded in a sheet.
class EmbeddedChart
include Google::Apis::Core::Hashable
# A border along an embedded object.
# Corresponds to the JSON property `border`
# @return [Google::Apis::SheetsV4::EmbeddedObjectBorder]
attr_accessor :border
# The ID of the chart.
# Corresponds to the JSON property `chartId`
# @return [Fixnum]
attr_accessor :chart_id
# The position of an embedded object such as a chart.
# Corresponds to the JSON property `position`
# @return [Google::Apis::SheetsV4::EmbeddedObjectPosition]
attr_accessor :position
# The specifications of a chart.
# Corresponds to the JSON property `spec`
# @return [Google::Apis::SheetsV4::ChartSpec]
attr_accessor :spec
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@border = args[:border] if args.key?(:border)
@chart_id = args[:chart_id] if args.key?(:chart_id)
@position = args[:position] if args.key?(:position)
@spec = args[:spec] if args.key?(:spec)
end
end
# A border along an embedded object.
class EmbeddedObjectBorder
include Google::Apis::Core::Hashable
# Represents a color in the RGBA color space. This representation is designed
# for simplicity of conversion to/from color representations in various
# languages over compactness; for example, the fields of this representation can
# be trivially provided to the constructor of "java.awt.Color" in Java; it can
# also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
# method in iOS; and, with just a little work, it can be easily formatted into a
# CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
# information about the absolute color space that should be used to interpret
# the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
# applications SHOULD assume the sRGB color space. Note: when color equality
# needs to be decided, implementations, unless documented otherwise, will treat
# two colors to be equal if all their red, green, blue and alpha values each
# differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
# public static java.awt.Color fromProto(Color protocolor) ` float alpha =
# protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
# java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
# ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
# float) color.getRed(); float green = (float) color.getGreen(); float blue = (
# float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
# = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
# .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
# ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
# denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
# Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
# protocolor red]; float green = [protocolor green]; float blue = [protocolor
# blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
# alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
# colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
# UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
# green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
# alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
# blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
# [result autorelease]; return result; ` // ... Example (JavaScript): // ...
# var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
# var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
# var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
# var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
# rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
# 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
# ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
# ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
# hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
# var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
# resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
# join(''); `; // ...
# Corresponds to the JSON property `color`
# @return [Google::Apis::SheetsV4::Color]
attr_accessor :color
# A color value.
# Corresponds to the JSON property `colorStyle`
# @return [Google::Apis::SheetsV4::ColorStyle]
attr_accessor :color_style
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@color = args[:color] if args.key?(:color)
@color_style = args[:color_style] if args.key?(:color_style)
end
end
# The position of an embedded object such as a chart.
class EmbeddedObjectPosition
include Google::Apis::Core::Hashable
# If true, the embedded object is put on a new sheet whose ID is chosen for you.
# Used only when writing.
# Corresponds to the JSON property `newSheet`
# @return [Boolean]
attr_accessor :new_sheet
alias_method :new_sheet?, :new_sheet
# The location an object is overlaid on top of a grid.
# Corresponds to the JSON property `overlayPosition`
# @return [Google::Apis::SheetsV4::OverlayPosition]
attr_accessor :overlay_position
# The sheet this is on. Set only if the embedded object is on its own sheet.
# Must be non-negative.
# Corresponds to the JSON property `sheetId`
# @return [Fixnum]
attr_accessor :sheet_id
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@new_sheet = args[:new_sheet] if args.key?(:new_sheet)
@overlay_position = args[:overlay_position] if args.key?(:overlay_position)
@sheet_id = args[:sheet_id] if args.key?(:sheet_id)
end
end
# An error in a cell.
class ErrorValue
include Google::Apis::Core::Hashable
# A message with more information about the error (in the spreadsheet's locale).
# Corresponds to the JSON property `message`
# @return [String]
attr_accessor :message
# The type of error.
# Corresponds to the JSON property `type`
# @return [String]
attr_accessor :type
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@message = args[:message] if args.key?(:message)
@type = args[:type] if args.key?(:type)
end
end
# The kinds of value that a cell in a spreadsheet can have.
class ExtendedValue
include Google::Apis::Core::Hashable
# Represents a boolean value.
# Corresponds to the JSON property `boolValue`
# @return [Boolean]
attr_accessor :bool_value
alias_method :bool_value?, :bool_value
# An error in a cell.
# Corresponds to the JSON property `errorValue`
# @return [Google::Apis::SheetsV4::ErrorValue]
attr_accessor :error_value
# Represents a formula.
# Corresponds to the JSON property `formulaValue`
# @return [String]
attr_accessor :formula_value
# Represents a double value. Note: Dates, Times and DateTimes are represented as
# doubles in "serial number" format.
# Corresponds to the JSON property `numberValue`
# @return [Float]
attr_accessor :number_value
# Represents a string value. Leading single quotes are not included. For example,
# if the user typed `'123` into the UI, this would be represented as a `
# stringValue` of `"123"`.
# Corresponds to the JSON property `stringValue`
# @return [String]
attr_accessor :string_value
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@bool_value = args[:bool_value] if args.key?(:bool_value)
@error_value = args[:error_value] if args.key?(:error_value)
@formula_value = args[:formula_value] if args.key?(:formula_value)
@number_value = args[:number_value] if args.key?(:number_value)
@string_value = args[:string_value] if args.key?(:string_value)
end
end
# Criteria for showing/hiding rows in a filter or filter view.
class FilterCriteria
include Google::Apis::Core::Hashable
# A condition that can evaluate to true or false. BooleanConditions are used by
# conditional formatting, data validation, and the criteria in filters.
# Corresponds to the JSON property `condition`
# @return [Google::Apis::SheetsV4::BooleanCondition]
attr_accessor :condition
# Values that should be hidden.
# Corresponds to the JSON property `hiddenValues`
# @return [Array<String>]
attr_accessor :hidden_values
# Represents a color in the RGBA color space. This representation is designed
# for simplicity of conversion to/from color representations in various
# languages over compactness; for example, the fields of this representation can
# be trivially provided to the constructor of "java.awt.Color" in Java; it can
# also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
# method in iOS; and, with just a little work, it can be easily formatted into a
# CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
# information about the absolute color space that should be used to interpret
# the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
# applications SHOULD assume the sRGB color space. Note: when color equality
# needs to be decided, implementations, unless documented otherwise, will treat
# two colors to be equal if all their red, green, blue and alpha values each
# differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
# public static java.awt.Color fromProto(Color protocolor) ` float alpha =
# protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
# java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
# ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
# float) color.getRed(); float green = (float) color.getGreen(); float blue = (
# float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
# = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
# .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
# ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
# denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
# Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
# protocolor red]; float green = [protocolor green]; float blue = [protocolor
# blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
# alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
# colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
# UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
# green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
# alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
# blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
# [result autorelease]; return result; ` // ... Example (JavaScript): // ...
# var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
# var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
# var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
# var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
# rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
# 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
# ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
# ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
# hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
# var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
# resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
# join(''); `; // ...
# Corresponds to the JSON property `visibleBackgroundColor`
# @return [Google::Apis::SheetsV4::Color]
attr_accessor :visible_background_color
# A color value.
# Corresponds to the JSON property `visibleBackgroundColorStyle`
# @return [Google::Apis::SheetsV4::ColorStyle]
attr_accessor :visible_background_color_style
# Represents a color in the RGBA color space. This representation is designed
# for simplicity of conversion to/from color representations in various
# languages over compactness; for example, the fields of this representation can
# be trivially provided to the constructor of "java.awt.Color" in Java; it can
# also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
# method in iOS; and, with just a little work, it can be easily formatted into a
# CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
# information about the absolute color space that should be used to interpret
# the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
# applications SHOULD assume the sRGB color space. Note: when color equality
# needs to be decided, implementations, unless documented otherwise, will treat
# two colors to be equal if all their red, green, blue and alpha values each
# differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
# public static java.awt.Color fromProto(Color protocolor) ` float alpha =
# protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
# java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
# ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
# float) color.getRed(); float green = (float) color.getGreen(); float blue = (
# float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
# = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
# .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
# ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
# denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
# Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
# protocolor red]; float green = [protocolor green]; float blue = [protocolor
# blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
# alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
# colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
# UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
# green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
# alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
# blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
# [result autorelease]; return result; ` // ... Example (JavaScript): // ...
# var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
# var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
# var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
# var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
# rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
# 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
# ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
# ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
# hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
# var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
# resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
# join(''); `; // ...
# Corresponds to the JSON property `visibleForegroundColor`
# @return [Google::Apis::SheetsV4::Color]
attr_accessor :visible_foreground_color
# A color value.
# Corresponds to the JSON property `visibleForegroundColorStyle`
# @return [Google::Apis::SheetsV4::ColorStyle]
attr_accessor :visible_foreground_color_style
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@condition = args[:condition] if args.key?(:condition)
@hidden_values = args[:hidden_values] if args.key?(:hidden_values)
@visible_background_color = args[:visible_background_color] if args.key?(:visible_background_color)
@visible_background_color_style = args[:visible_background_color_style] if args.key?(:visible_background_color_style)
@visible_foreground_color = args[:visible_foreground_color] if args.key?(:visible_foreground_color)
@visible_foreground_color_style = args[:visible_foreground_color_style] if args.key?(:visible_foreground_color_style)
end
end
# The filter criteria associated with a specific column.
class FilterSpec
include Google::Apis::Core::Hashable
# The column index.
# Corresponds to the JSON property `columnIndex`
# @return [Fixnum]
attr_accessor :column_index
# An unique identifier that references a data source column.
# Corresponds to the JSON property `dataSourceColumnReference`
# @return [Google::Apis::SheetsV4::DataSourceColumnReference]
attr_accessor :data_source_column_reference
# Criteria for showing/hiding rows in a filter or filter view.
# Corresponds to the JSON property `filterCriteria`
# @return [Google::Apis::SheetsV4::FilterCriteria]
attr_accessor :filter_criteria
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@column_index = args[:column_index] if args.key?(:column_index)
@data_source_column_reference = args[:data_source_column_reference] if args.key?(:data_source_column_reference)
@filter_criteria = args[:filter_criteria] if args.key?(:filter_criteria)
end
end
# A filter view.
class FilterView
include Google::Apis::Core::Hashable
# The criteria for showing/hiding values per column. The map's key is the column
# index, and the value is the criteria for that column. This field is deprecated
# in favor of filter_specs.
# Corresponds to the JSON property `criteria`
# @return [Hash<String,Google::Apis::SheetsV4::FilterCriteria>]
attr_accessor :criteria
# The filter criteria for showing/hiding values per column. Both criteria and
# filter_specs are populated in responses. If both fields are specified in an
# update request, this field takes precedence.
# Corresponds to the JSON property `filterSpecs`
# @return [Array<Google::Apis::SheetsV4::FilterSpec>]
attr_accessor :filter_specs
# The ID of the filter view.
# Corresponds to the JSON property `filterViewId`
# @return [Fixnum]
attr_accessor :filter_view_id
# The named range this filter view is backed by, if any. When writing, only one
# of range or named_range_id may be set.
# Corresponds to the JSON property `namedRangeId`
# @return [String]
attr_accessor :named_range_id
# A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
# the start index is inclusive and the end index is exclusive -- [start_index,
# end_index). Missing indexes indicate the range is unbounded on that side. For
# example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
# start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
# 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
# start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
# start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
# start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
# sheet_id:0` The start index must always be less than or equal to the end index.
# If the start index equals the end index, then the range is empty. Empty
# ranges are typically not meaningful and are usually rendered in the UI as `#
# REF!`.
# Corresponds to the JSON property `range`
# @return [Google::Apis::SheetsV4::GridRange]
attr_accessor :range
# The sort order per column. Later specifications are used when values are equal
# in the earlier specifications.
# Corresponds to the JSON property `sortSpecs`
# @return [Array<Google::Apis::SheetsV4::SortSpec>]
attr_accessor :sort_specs
# The name of the filter view.
# Corresponds to the JSON property `title`
# @return [String]
attr_accessor :title
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@criteria = args[:criteria] if args.key?(:criteria)
@filter_specs = args[:filter_specs] if args.key?(:filter_specs)
@filter_view_id = args[:filter_view_id] if args.key?(:filter_view_id)
@named_range_id = args[:named_range_id] if args.key?(:named_range_id)
@range = args[:range] if args.key?(:range)
@sort_specs = args[:sort_specs] if args.key?(:sort_specs)
@title = args[:title] if args.key?(:title)
end
end
# Finds and replaces data in cells over a range, sheet, or all sheets.
class FindReplaceRequest
include Google::Apis::Core::Hashable
# True to find/replace over all sheets.
# Corresponds to the JSON property `allSheets`
# @return [Boolean]
attr_accessor :all_sheets
alias_method :all_sheets?, :all_sheets
# The value to search.
# Corresponds to the JSON property `find`
# @return [String]
attr_accessor :find
# True if the search should include cells with formulas. False to skip cells
# with formulas.
# Corresponds to the JSON property `includeFormulas`
# @return [Boolean]
attr_accessor :include_formulas
alias_method :include_formulas?, :include_formulas
# True if the search is case sensitive.
# Corresponds to the JSON property `matchCase`
# @return [Boolean]
attr_accessor :match_case
alias_method :match_case?, :match_case
# True if the find value should match the entire cell.
# Corresponds to the JSON property `matchEntireCell`
# @return [Boolean]
attr_accessor :match_entire_cell
alias_method :match_entire_cell?, :match_entire_cell
# A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
# the start index is inclusive and the end index is exclusive -- [start_index,
# end_index). Missing indexes indicate the range is unbounded on that side. For
# example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
# start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
# 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
# start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
# start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
# start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
# sheet_id:0` The start index must always be less than or equal to the end index.
# If the start index equals the end index, then the range is empty. Empty
# ranges are typically not meaningful and are usually rendered in the UI as `#
# REF!`.
# Corresponds to the JSON property `range`
# @return [Google::Apis::SheetsV4::GridRange]
attr_accessor :range
# The value to use as the replacement.
# Corresponds to the JSON property `replacement`
# @return [String]
attr_accessor :replacement
# True if the find value is a regex. The regular expression and replacement
# should follow Java regex rules at https://docs.oracle.com/javase/8/docs/api/
# java/util/regex/Pattern.html. The replacement string is allowed to refer to
# capturing groups. For example, if one cell has the contents `"Google Sheets"`
# and another has `"Google Docs"`, then searching for `"o.* (.*)"` with a
# replacement of `"$1 Rocks"` would change the contents of the cells to `"
# GSheets Rocks"` and `"GDocs Rocks"` respectively.
# Corresponds to the JSON property `searchByRegex`
# @return [Boolean]
attr_accessor :search_by_regex
alias_method :search_by_regex?, :search_by_regex
# The sheet to find/replace over.
# Corresponds to the JSON property `sheetId`
# @return [Fixnum]
attr_accessor :sheet_id
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@all_sheets = args[:all_sheets] if args.key?(:all_sheets)
@find = args[:find] if args.key?(:find)
@include_formulas = args[:include_formulas] if args.key?(:include_formulas)
@match_case = args[:match_case] if args.key?(:match_case)
@match_entire_cell = args[:match_entire_cell] if args.key?(:match_entire_cell)
@range = args[:range] if args.key?(:range)
@replacement = args[:replacement] if args.key?(:replacement)
@search_by_regex = args[:search_by_regex] if args.key?(:search_by_regex)
@sheet_id = args[:sheet_id] if args.key?(:sheet_id)
end
end
# The result of the find/replace.
class FindReplaceResponse
include Google::Apis::Core::Hashable
# The number of formula cells changed.
# Corresponds to the JSON property `formulasChanged`
# @return [Fixnum]
attr_accessor :formulas_changed
# The number of occurrences (possibly multiple within a cell) changed. For
# example, if replacing `"e"` with `"o"` in `"Google Sheets"`, this would be `"3"
# ` because `"Google Sheets"` -> `"Googlo Shoots"`.
# Corresponds to the JSON property `occurrencesChanged`
# @return [Fixnum]
attr_accessor :occurrences_changed
# The number of rows changed.
# Corresponds to the JSON property `rowsChanged`
# @return [Fixnum]
attr_accessor :rows_changed
# The number of sheets changed.
# Corresponds to the JSON property `sheetsChanged`
# @return [Fixnum]
attr_accessor :sheets_changed
# The number of non-formula cells changed.
# Corresponds to the JSON property `valuesChanged`
# @return [Fixnum]
attr_accessor :values_changed
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@formulas_changed = args[:formulas_changed] if args.key?(:formulas_changed)
@occurrences_changed = args[:occurrences_changed] if args.key?(:occurrences_changed)
@rows_changed = args[:rows_changed] if args.key?(:rows_changed)
@sheets_changed = args[:sheets_changed] if args.key?(:sheets_changed)
@values_changed = args[:values_changed] if args.key?(:values_changed)
end
end
# The request for retrieving a Spreadsheet.
class GetSpreadsheetByDataFilterRequest
include Google::Apis::Core::Hashable
# The DataFilters used to select which ranges to retrieve from the spreadsheet.
# Corresponds to the JSON property `dataFilters`
# @return [Array<Google::Apis::SheetsV4::DataFilter>]
attr_accessor :data_filters
# True if grid data should be returned. This parameter is ignored if a field
# mask was set in the request.
# Corresponds to the JSON property `includeGridData`
# @return [Boolean]
attr_accessor :include_grid_data
alias_method :include_grid_data?, :include_grid_data
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data_filters = args[:data_filters] if args.key?(:data_filters)
@include_grid_data = args[:include_grid_data] if args.key?(:include_grid_data)
end
end
# A rule that applies a gradient color scale format, based on the interpolation
# points listed. The format of a cell will vary based on its contents as
# compared to the values of the interpolation points.
class GradientRule
include Google::Apis::Core::Hashable
# A single interpolation point on a gradient conditional format. These pin the
# gradient color scale according to the color, type and value chosen.
# Corresponds to the JSON property `maxpoint`
# @return [Google::Apis::SheetsV4::InterpolationPoint]
attr_accessor :maxpoint
# A single interpolation point on a gradient conditional format. These pin the
# gradient color scale according to the color, type and value chosen.
# Corresponds to the JSON property `midpoint`
# @return [Google::Apis::SheetsV4::InterpolationPoint]
attr_accessor :midpoint
# A single interpolation point on a gradient conditional format. These pin the
# gradient color scale according to the color, type and value chosen.
# Corresponds to the JSON property `minpoint`
# @return [Google::Apis::SheetsV4::InterpolationPoint]
attr_accessor :minpoint
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@maxpoint = args[:maxpoint] if args.key?(:maxpoint)
@midpoint = args[:midpoint] if args.key?(:midpoint)
@minpoint = args[:minpoint] if args.key?(:minpoint)
end
end
# A coordinate in a sheet. All indexes are zero-based.
class GridCoordinate
include Google::Apis::Core::Hashable
# The column index of the coordinate.
# Corresponds to the JSON property `columnIndex`
# @return [Fixnum]
attr_accessor :column_index
# The row index of the coordinate.
# Corresponds to the JSON property `rowIndex`
# @return [Fixnum]
attr_accessor :row_index
# The sheet this coordinate is on.
# Corresponds to the JSON property `sheetId`
# @return [Fixnum]
attr_accessor :sheet_id
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@column_index = args[:column_index] if args.key?(:column_index)
@row_index = args[:row_index] if args.key?(:row_index)
@sheet_id = args[:sheet_id] if args.key?(:sheet_id)
end
end
# Data in the grid, as well as metadata about the dimensions.
class GridData
include Google::Apis::Core::Hashable
# Metadata about the requested columns in the grid, starting with the column in
# start_column.
# Corresponds to the JSON property `columnMetadata`
# @return [Array<Google::Apis::SheetsV4::DimensionProperties>]
attr_accessor :column_metadata
# The data in the grid, one entry per row, starting with the row in startRow.
# The values in RowData will correspond to columns starting at start_column.
# Corresponds to the JSON property `rowData`
# @return [Array<Google::Apis::SheetsV4::RowData>]
attr_accessor :row_data
# Metadata about the requested rows in the grid, starting with the row in
# start_row.
# Corresponds to the JSON property `rowMetadata`
# @return [Array<Google::Apis::SheetsV4::DimensionProperties>]
attr_accessor :row_metadata
# The first column this GridData refers to, zero-based.
# Corresponds to the JSON property `startColumn`
# @return [Fixnum]
attr_accessor :start_column
# The first row this GridData refers to, zero-based.
# Corresponds to the JSON property `startRow`
# @return [Fixnum]
attr_accessor :start_row
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@column_metadata = args[:column_metadata] if args.key?(:column_metadata)
@row_data = args[:row_data] if args.key?(:row_data)
@row_metadata = args[:row_metadata] if args.key?(:row_metadata)
@start_column = args[:start_column] if args.key?(:start_column)
@start_row = args[:start_row] if args.key?(:start_row)
end
end
# Properties of a grid.
class GridProperties
include Google::Apis::Core::Hashable
# The number of columns in the grid.
# Corresponds to the JSON property `columnCount`
# @return [Fixnum]
attr_accessor :column_count
# True if the column grouping control toggle is shown after the group.
# Corresponds to the JSON property `columnGroupControlAfter`
# @return [Boolean]
attr_accessor :column_group_control_after
alias_method :column_group_control_after?, :column_group_control_after
# The number of columns that are frozen in the grid.
# Corresponds to the JSON property `frozenColumnCount`
# @return [Fixnum]
attr_accessor :frozen_column_count
# The number of rows that are frozen in the grid.
# Corresponds to the JSON property `frozenRowCount`
# @return [Fixnum]
attr_accessor :frozen_row_count
# True if the grid isn't showing gridlines in the UI.
# Corresponds to the JSON property `hideGridlines`
# @return [Boolean]
attr_accessor :hide_gridlines
alias_method :hide_gridlines?, :hide_gridlines
# The number of rows in the grid.
# Corresponds to the JSON property `rowCount`
# @return [Fixnum]
attr_accessor :row_count
# True if the row grouping control toggle is shown after the group.
# Corresponds to the JSON property `rowGroupControlAfter`
# @return [Boolean]
attr_accessor :row_group_control_after
alias_method :row_group_control_after?, :row_group_control_after
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@column_count = args[:column_count] if args.key?(:column_count)
@column_group_control_after = args[:column_group_control_after] if args.key?(:column_group_control_after)
@frozen_column_count = args[:frozen_column_count] if args.key?(:frozen_column_count)
@frozen_row_count = args[:frozen_row_count] if args.key?(:frozen_row_count)
@hide_gridlines = args[:hide_gridlines] if args.key?(:hide_gridlines)
@row_count = args[:row_count] if args.key?(:row_count)
@row_group_control_after = args[:row_group_control_after] if args.key?(:row_group_control_after)
end
end
# A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
# the start index is inclusive and the end index is exclusive -- [start_index,
# end_index). Missing indexes indicate the range is unbounded on that side. For
# example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
# start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
# 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
# start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
# start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
# start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
# sheet_id:0` The start index must always be less than or equal to the end index.
# If the start index equals the end index, then the range is empty. Empty
# ranges are typically not meaningful and are usually rendered in the UI as `#
# REF!`.
class GridRange
include Google::Apis::Core::Hashable
# The end column (exclusive) of the range, or not set if unbounded.
# Corresponds to the JSON property `endColumnIndex`
# @return [Fixnum]
attr_accessor :end_column_index
# The end row (exclusive) of the range, or not set if unbounded.
# Corresponds to the JSON property `endRowIndex`
# @return [Fixnum]
attr_accessor :end_row_index
# The sheet this range is on.
# Corresponds to the JSON property `sheetId`
# @return [Fixnum]
attr_accessor :sheet_id
# The start column (inclusive) of the range, or not set if unbounded.
# Corresponds to the JSON property `startColumnIndex`
# @return [Fixnum]
attr_accessor :start_column_index
# The start row (inclusive) of the range, or not set if unbounded.
# Corresponds to the JSON property `startRowIndex`
# @return [Fixnum]
attr_accessor :start_row_index
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@end_column_index = args[:end_column_index] if args.key?(:end_column_index)
@end_row_index = args[:end_row_index] if args.key?(:end_row_index)
@sheet_id = args[:sheet_id] if args.key?(:sheet_id)
@start_column_index = args[:start_column_index] if args.key?(:start_column_index)
@start_row_index = args[:start_row_index] if args.key?(:start_row_index)
end
end
# A histogram chart. A histogram chart groups data items into bins, displaying
# each bin as a column of stacked items. Histograms are used to display the
# distribution of a dataset. Each column of items represents a range into which
# those items fall. The number of bins can be chosen automatically or specified
# explicitly.
class HistogramChartSpec
include Google::Apis::Core::Hashable
# By default the bucket size (the range of values stacked in a single column) is
# chosen automatically, but it may be overridden here. E.g., A bucket size of 1.
# 5 results in buckets from 0 - 1.5, 1.5 - 3.0, etc. Cannot be negative. This
# field is optional.
# Corresponds to the JSON property `bucketSize`
# @return [Float]
attr_accessor :bucket_size
# The position of the chart legend.
# Corresponds to the JSON property `legendPosition`
# @return [String]
attr_accessor :legend_position
# The outlier percentile is used to ensure that outliers do not adversely affect
# the calculation of bucket sizes. For example, setting an outlier percentile of
# 0.05 indicates that the top and bottom 5% of values when calculating buckets.
# The values are still included in the chart, they will be added to the first or
# last buckets instead of their own buckets. Must be between 0.0 and 0.5.
# Corresponds to the JSON property `outlierPercentile`
# @return [Float]
attr_accessor :outlier_percentile
# The series for a histogram may be either a single series of values to be
# bucketed or multiple series, each of the same length, containing the name of
# the series followed by the values to be bucketed for that series.
# Corresponds to the JSON property `series`
# @return [Array<Google::Apis::SheetsV4::HistogramSeries>]
attr_accessor :series
# Whether horizontal divider lines should be displayed between items in each
# column.
# Corresponds to the JSON property `showItemDividers`
# @return [Boolean]
attr_accessor :show_item_dividers
alias_method :show_item_dividers?, :show_item_dividers
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@bucket_size = args[:bucket_size] if args.key?(:bucket_size)
@legend_position = args[:legend_position] if args.key?(:legend_position)
@outlier_percentile = args[:outlier_percentile] if args.key?(:outlier_percentile)
@series = args[:series] if args.key?(:series)
@show_item_dividers = args[:show_item_dividers] if args.key?(:show_item_dividers)
end
end
# Allows you to organize the numeric values in a source data column into buckets
# of a constant size. All values from HistogramRule.start to HistogramRule.end
# are placed into groups of size HistogramRule.interval. In addition, all values
# below HistogramRule.start are placed in one group, and all values above
# HistogramRule.end are placed in another. Only HistogramRule.interval is
# required, though if HistogramRule.start and HistogramRule.end are both
# provided, HistogramRule.start must be less than HistogramRule.end. For example,
# a pivot table showing average purchase amount by age that has 50+ rows: +-----
# +-------------------+ | Age | AVERAGE of Amount | +-----+-------------------+ |
# 16 | $27.13 | | 17 | $5.24 | | 18 | $20.15 | ... +-----+-------------------+
# could be turned into a pivot table that looks like the one below by applying a
# histogram group rule with a HistogramRule.start of 25, an HistogramRule.
# interval of 20, and an HistogramRule.end of 65. +-------------+----------------
# ---+ | Grouped Age | AVERAGE of Amount | +-------------+-------------------+ |
# < 25 | $19.34 | | 25-45 | $31.43 | | 45-65 | $35.87 | | > 65 | $27.55 | +------
# -------+-------------------+ | Grand Total | $29.12 | +-------------+----------
# ---------+
class HistogramRule
include Google::Apis::Core::Hashable
# The maximum value at which items are placed into buckets of constant size.
# Values above end are lumped into a single bucket. This field is optional.
# Corresponds to the JSON property `end`
# @return [Float]
attr_accessor :end
# The size of the buckets that are created. Must be positive.
# Corresponds to the JSON property `interval`
# @return [Float]
attr_accessor :interval
# The minimum value at which items are placed into buckets of constant size.
# Values below start are lumped into a single bucket. This field is optional.
# Corresponds to the JSON property `start`
# @return [Float]
attr_accessor :start
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@end = args[:end] if args.key?(:end)
@interval = args[:interval] if args.key?(:interval)
@start = args[:start] if args.key?(:start)
end
end
# A histogram series containing the series color and data.
class HistogramSeries
include Google::Apis::Core::Hashable
# Represents a color in the RGBA color space. This representation is designed
# for simplicity of conversion to/from color representations in various
# languages over compactness; for example, the fields of this representation can
# be trivially provided to the constructor of "java.awt.Color" in Java; it can
# also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
# method in iOS; and, with just a little work, it can be easily formatted into a
# CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
# information about the absolute color space that should be used to interpret
# the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
# applications SHOULD assume the sRGB color space. Note: when color equality
# needs to be decided, implementations, unless documented otherwise, will treat
# two colors to be equal if all their red, green, blue and alpha values each
# differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
# public static java.awt.Color fromProto(Color protocolor) ` float alpha =
# protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
# java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
# ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
# float) color.getRed(); float green = (float) color.getGreen(); float blue = (
# float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
# = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
# .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
# ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
# denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
# Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
# protocolor red]; float green = [protocolor green]; float blue = [protocolor
# blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
# alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
# colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
# UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
# green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
# alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
# blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
# [result autorelease]; return result; ` // ... Example (JavaScript): // ...
# var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
# var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
# var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
# var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
# rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
# 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
# ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
# ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
# hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
# var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
# resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
# join(''); `; // ...
# Corresponds to the JSON property `barColor`
# @return [Google::Apis::SheetsV4::Color]
attr_accessor :bar_color
# A color value.
# Corresponds to the JSON property `barColorStyle`
# @return [Google::Apis::SheetsV4::ColorStyle]
attr_accessor :bar_color_style
# The data included in a domain or series.
# Corresponds to the JSON property `data`
# @return [Google::Apis::SheetsV4::ChartData]
attr_accessor :data
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@bar_color = args[:bar_color] if args.key?(:bar_color)
@bar_color_style = args[:bar_color_style] if args.key?(:bar_color_style)
@data = args[:data] if args.key?(:data)
end
end
# Inserts rows or columns in a sheet at a particular index.
class InsertDimensionRequest
include Google::Apis::Core::Hashable
# Whether dimension properties should be extended from the dimensions before or
# after the newly inserted dimensions. True to inherit from the dimensions
# before (in which case the start index must be greater than 0), and false to
# inherit from the dimensions after. For example, if row index 0 has red
# background and row index 1 has a green background, then inserting 2 rows at
# index 1 can inherit either the green or red background. If `inheritFromBefore`
# is true, the two new rows will be red (because the row before the insertion
# point was red), whereas if `inheritFromBefore` is false, the two new rows will
# be green (because the row after the insertion point was green).
# Corresponds to the JSON property `inheritFromBefore`
# @return [Boolean]
attr_accessor :inherit_from_before
alias_method :inherit_from_before?, :inherit_from_before
# A range along a single dimension on a sheet. All indexes are zero-based.
# Indexes are half open: the start index is inclusive and the end index is
# exclusive. Missing indexes indicate the range is unbounded on that side.
# Corresponds to the JSON property `range`
# @return [Google::Apis::SheetsV4::DimensionRange]
attr_accessor :range
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@inherit_from_before = args[:inherit_from_before] if args.key?(:inherit_from_before)
@range = args[:range] if args.key?(:range)
end
end
# Inserts cells into a range, shifting the existing cells over or down.
class InsertRangeRequest
include Google::Apis::Core::Hashable
# A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
# the start index is inclusive and the end index is exclusive -- [start_index,
# end_index). Missing indexes indicate the range is unbounded on that side. For
# example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
# start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
# 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
# start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
# start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
# start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
# sheet_id:0` The start index must always be less than or equal to the end index.
# If the start index equals the end index, then the range is empty. Empty
# ranges are typically not meaningful and are usually rendered in the UI as `#
# REF!`.
# Corresponds to the JSON property `range`
# @return [Google::Apis::SheetsV4::GridRange]
attr_accessor :range
# The dimension which will be shifted when inserting cells. If ROWS, existing
# cells will be shifted down. If COLUMNS, existing cells will be shifted right.
# Corresponds to the JSON property `shiftDimension`
# @return [String]
attr_accessor :shift_dimension
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@range = args[:range] if args.key?(:range)
@shift_dimension = args[:shift_dimension] if args.key?(:shift_dimension)
end
end
# A single interpolation point on a gradient conditional format. These pin the
# gradient color scale according to the color, type and value chosen.
class InterpolationPoint
include Google::Apis::Core::Hashable
# Represents a color in the RGBA color space. This representation is designed
# for simplicity of conversion to/from color representations in various
# languages over compactness; for example, the fields of this representation can
# be trivially provided to the constructor of "java.awt.Color" in Java; it can
# also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
# method in iOS; and, with just a little work, it can be easily formatted into a
# CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
# information about the absolute color space that should be used to interpret
# the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
# applications SHOULD assume the sRGB color space. Note: when color equality
# needs to be decided, implementations, unless documented otherwise, will treat
# two colors to be equal if all their red, green, blue and alpha values each
# differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
# public static java.awt.Color fromProto(Color protocolor) ` float alpha =
# protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
# java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
# ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
# float) color.getRed(); float green = (float) color.getGreen(); float blue = (
# float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
# = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
# .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
# ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
# denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
# Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
# protocolor red]; float green = [protocolor green]; float blue = [protocolor
# blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
# alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
# colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
# UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
# green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
# alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
# blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
# [result autorelease]; return result; ` // ... Example (JavaScript): // ...
# var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
# var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
# var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
# var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
# rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
# 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
# ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
# ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
# hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
# var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
# resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
# join(''); `; // ...
# Corresponds to the JSON property `color`
# @return [Google::Apis::SheetsV4::Color]
attr_accessor :color
# A color value.
# Corresponds to the JSON property `colorStyle`
# @return [Google::Apis::SheetsV4::ColorStyle]
attr_accessor :color_style
# How the value should be interpreted.
# Corresponds to the JSON property `type`
# @return [String]
attr_accessor :type
# The value this interpolation point uses. May be a formula. Unused if type is
# MIN or MAX.
# Corresponds to the JSON property `value`
# @return [String]
attr_accessor :value
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@color = args[:color] if args.key?(:color)
@color_style = args[:color_style] if args.key?(:color_style)
@type = args[:type] if args.key?(:type)
@value = args[:value] if args.key?(:value)
end
end
# Represents a time interval, encoded as a Timestamp start (inclusive) and a
# Timestamp end (exclusive). The start must be less than or equal to the end.
# When the start equals the end, the interval is empty (matches no time). When
# both start and end are unspecified, the interval matches any time.
class Interval
include Google::Apis::Core::Hashable
# Optional. Exclusive end of the interval. If specified, a Timestamp matching
# this interval will have to be before the end.
# Corresponds to the JSON property `endTime`
# @return [String]
attr_accessor :end_time
# Optional. Inclusive start of the interval. If specified, a Timestamp matching
# this interval will have to be the same or after the start.
# Corresponds to the JSON property `startTime`
# @return [String]
attr_accessor :start_time
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@end_time = args[:end_time] if args.key?(:end_time)
@start_time = args[:start_time] if args.key?(:start_time)
end
end
# Settings to control how circular dependencies are resolved with iterative
# calculation.
class IterativeCalculationSettings
include Google::Apis::Core::Hashable
# When iterative calculation is enabled and successive results differ by less
# than this threshold value, the calculation rounds stop.
# Corresponds to the JSON property `convergenceThreshold`
# @return [Float]
attr_accessor :convergence_threshold
# When iterative calculation is enabled, the maximum number of calculation
# rounds to perform.
# Corresponds to the JSON property `maxIterations`
# @return [Fixnum]
attr_accessor :max_iterations
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@convergence_threshold = args[:convergence_threshold] if args.key?(:convergence_threshold)
@max_iterations = args[:max_iterations] if args.key?(:max_iterations)
end
end
# Formatting options for key value.
class KeyValueFormat
include Google::Apis::Core::Hashable
# Position settings for text.
# Corresponds to the JSON property `position`
# @return [Google::Apis::SheetsV4::TextPosition]
attr_accessor :position
# The format of a run of text in a cell. Absent values indicate that the field
# isn't specified.
# Corresponds to the JSON property `textFormat`
# @return [Google::Apis::SheetsV4::TextFormat]
attr_accessor :text_format
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@position = args[:position] if args.key?(:position)
@text_format = args[:text_format] if args.key?(:text_format)
end
end
# Properties that describe the style of a line.
class LineStyle
include Google::Apis::Core::Hashable
# The dash type of the line.
# Corresponds to the JSON property `type`
# @return [String]
attr_accessor :type
# The thickness of the line, in px.
# Corresponds to the JSON property `width`
# @return [Fixnum]
attr_accessor :width
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@type = args[:type] if args.key?(:type)
@width = args[:width] if args.key?(:width)
end
end
# Allows you to manually organize the values in a source data column into
# buckets with names of your choosing. For example, a pivot table that
# aggregates population by state: +-------+-------------------+ | State | SUM of
# Population | +-------+-------------------+ | AK | 0.7 | | AL | 4.8 | | AR | 2.
# 9 | ... +-------+-------------------+ could be turned into a pivot table that
# aggregates population by time zone by providing a list of groups (for example,
# groupName = 'Central', items = ['AL', 'AR', 'IA', ...]) to a manual group rule.
# Note that a similar effect could be achieved by adding a time zone column to
# the source data and adjusting the pivot table. +-----------+-------------------
# + | Time Zone | SUM of Population | +-----------+-------------------+ |
# Central | 106.3 | | Eastern | 151.9 | | Mountain | 17.4 | ... +-----------+----
# ---------------+
class ManualRule
include Google::Apis::Core::Hashable
# The list of group names and the corresponding items from the source data that
# map to each group name.
# Corresponds to the JSON property `groups`
# @return [Array<Google::Apis::SheetsV4::ManualRuleGroup>]
attr_accessor :groups
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@groups = args[:groups] if args.key?(:groups)
end
end
# A group name and a list of items from the source data that should be placed in
# the group with this name.
class ManualRuleGroup
include Google::Apis::Core::Hashable
# The kinds of value that a cell in a spreadsheet can have.
# Corresponds to the JSON property `groupName`
# @return [Google::Apis::SheetsV4::ExtendedValue]
attr_accessor :group_name
# The items in the source data that should be placed into this group. Each item
# may be a string, number, or boolean. Items may appear in at most one group
# within a given ManualRule. Items that do not appear in any group will appear
# on their own.
# Corresponds to the JSON property `items`
# @return [Array<Google::Apis::SheetsV4::ExtendedValue>]
attr_accessor :items
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@group_name = args[:group_name] if args.key?(:group_name)
@items = args[:items] if args.key?(:items)
end
end
# A developer metadata entry and the data filters specified in the original
# request that matched it.
class MatchedDeveloperMetadata
include Google::Apis::Core::Hashable
# All filters matching the returned developer metadata.
# Corresponds to the JSON property `dataFilters`
# @return [Array<Google::Apis::SheetsV4::DataFilter>]
attr_accessor :data_filters
# Developer metadata associated with a location or object in a spreadsheet.
# Developer metadata may be used to associate arbitrary data with various parts
# of a spreadsheet and will remain associated at those locations as they move
# around and the spreadsheet is edited. For example, if developer metadata is
# associated with row 5 and another row is then subsequently inserted above row
# 5, that original metadata will still be associated with the row it was first
# associated with (what is now row 6). If the associated object is deleted its
# metadata is deleted too.
# Corresponds to the JSON property `developerMetadata`
# @return [Google::Apis::SheetsV4::DeveloperMetadata]
attr_accessor :developer_metadata
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data_filters = args[:data_filters] if args.key?(:data_filters)
@developer_metadata = args[:developer_metadata] if args.key?(:developer_metadata)
end
end
# A value range that was matched by one or more data filers.
class MatchedValueRange
include Google::Apis::Core::Hashable
# The DataFilters from the request that matched the range of values.
# Corresponds to the JSON property `dataFilters`
# @return [Array<Google::Apis::SheetsV4::DataFilter>]
attr_accessor :data_filters
# Data within a range of the spreadsheet.
# Corresponds to the JSON property `valueRange`
# @return [Google::Apis::SheetsV4::ValueRange]
attr_accessor :value_range
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data_filters = args[:data_filters] if args.key?(:data_filters)
@value_range = args[:value_range] if args.key?(:value_range)
end
end
# Merges all cells in the range.
class MergeCellsRequest
include Google::Apis::Core::Hashable
# How the cells should be merged.
# Corresponds to the JSON property `mergeType`
# @return [String]
attr_accessor :merge_type
# A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
# the start index is inclusive and the end index is exclusive -- [start_index,
# end_index). Missing indexes indicate the range is unbounded on that side. For
# example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
# start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
# 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
# start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
# start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
# start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
# sheet_id:0` The start index must always be less than or equal to the end index.
# If the start index equals the end index, then the range is empty. Empty
# ranges are typically not meaningful and are usually rendered in the UI as `#
# REF!`.
# Corresponds to the JSON property `range`
# @return [Google::Apis::SheetsV4::GridRange]
attr_accessor :range
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@merge_type = args[:merge_type] if args.key?(:merge_type)
@range = args[:range] if args.key?(:range)
end
end
# Moves one or more rows or columns.
class MoveDimensionRequest
include Google::Apis::Core::Hashable
# The zero-based start index of where to move the source data to, based on the
# coordinates *before* the source data is removed from the grid. Existing data
# will be shifted down or right (depending on the dimension) to make room for
# the moved dimensions. The source dimensions are removed from the grid, so the
# the data may end up in a different index than specified. For example, given `
# A1..A5` of `0, 1, 2, 3, 4` and wanting to move `"1"` and `"2"` to between `"3"`
# and `"4"`, the source would be `ROWS [1..3)`,and the destination index would
# be `"4"` (the zero-based index of row 5). The end result would be `A1..A5` of `
# 0, 3, 1, 2, 4`.
# Corresponds to the JSON property `destinationIndex`
# @return [Fixnum]
attr_accessor :destination_index
# A range along a single dimension on a sheet. All indexes are zero-based.
# Indexes are half open: the start index is inclusive and the end index is
# exclusive. Missing indexes indicate the range is unbounded on that side.
# Corresponds to the JSON property `source`
# @return [Google::Apis::SheetsV4::DimensionRange]
attr_accessor :source
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@destination_index = args[:destination_index] if args.key?(:destination_index)
@source = args[:source] if args.key?(:source)
end
end
# A named range.
class NamedRange
include Google::Apis::Core::Hashable
# The name of the named range.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# The ID of the named range.
# Corresponds to the JSON property `namedRangeId`
# @return [String]
attr_accessor :named_range_id
# A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
# the start index is inclusive and the end index is exclusive -- [start_index,
# end_index). Missing indexes indicate the range is unbounded on that side. For
# example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
# start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
# 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
# start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
# start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
# start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
# sheet_id:0` The start index must always be less than or equal to the end index.
# If the start index equals the end index, then the range is empty. Empty
# ranges are typically not meaningful and are usually rendered in the UI as `#
# REF!`.
# Corresponds to the JSON property `range`
# @return [Google::Apis::SheetsV4::GridRange]
attr_accessor :range
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@name = args[:name] if args.key?(:name)
@named_range_id = args[:named_range_id] if args.key?(:named_range_id)
@range = args[:range] if args.key?(:range)
end
end
# The number format of a cell.
class NumberFormat
include Google::Apis::Core::Hashable
# Pattern string used for formatting. If not set, a default pattern based on the
# user's locale will be used if necessary for the given type. See the [Date and
# Number Formats guide](/sheets/api/guides/formats) for more information about
# the supported patterns.
# Corresponds to the JSON property `pattern`
# @return [String]
attr_accessor :pattern
# The type of the number format. When writing, this field must be set.
# Corresponds to the JSON property `type`
# @return [String]
attr_accessor :type
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@pattern = args[:pattern] if args.key?(:pattern)
@type = args[:type] if args.key?(:type)
end
end
# An org chart. Org charts require a unique set of labels in labels and may
# optionally include parent_labels and tooltips. parent_labels contain, for each
# node, the label identifying the parent node. tooltips contain, for each node,
# an optional tooltip. For example, to describe an OrgChart with Alice as the
# CEO, Bob as the President (reporting to Alice) and Cathy as VP of Sales (also
# reporting to Alice), have labels contain "Alice", "Bob", "Cathy",
# parent_labels contain "", "Alice", "Alice" and tooltips contain "CEO", "
# President", "VP Sales".
class OrgChartSpec
include Google::Apis::Core::Hashable
# The data included in a domain or series.
# Corresponds to the JSON property `labels`
# @return [Google::Apis::SheetsV4::ChartData]
attr_accessor :labels
# Represents a color in the RGBA color space. This representation is designed
# for simplicity of conversion to/from color representations in various
# languages over compactness; for example, the fields of this representation can
# be trivially provided to the constructor of "java.awt.Color" in Java; it can
# also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
# method in iOS; and, with just a little work, it can be easily formatted into a
# CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
# information about the absolute color space that should be used to interpret
# the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
# applications SHOULD assume the sRGB color space. Note: when color equality
# needs to be decided, implementations, unless documented otherwise, will treat
# two colors to be equal if all their red, green, blue and alpha values each
# differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
# public static java.awt.Color fromProto(Color protocolor) ` float alpha =
# protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
# java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
# ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
# float) color.getRed(); float green = (float) color.getGreen(); float blue = (
# float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
# = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
# .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
# ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
# denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
# Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
# protocolor red]; float green = [protocolor green]; float blue = [protocolor
# blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
# alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
# colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
# UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
# green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
# alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
# blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
# [result autorelease]; return result; ` // ... Example (JavaScript): // ...
# var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
# var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
# var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
# var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
# rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
# 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
# ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
# ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
# hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
# var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
# resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
# join(''); `; // ...
# Corresponds to the JSON property `nodeColor`
# @return [Google::Apis::SheetsV4::Color]
attr_accessor :node_color
# A color value.
# Corresponds to the JSON property `nodeColorStyle`
# @return [Google::Apis::SheetsV4::ColorStyle]
attr_accessor :node_color_style
# The size of the org chart nodes.
# Corresponds to the JSON property `nodeSize`
# @return [String]
attr_accessor :node_size
# The data included in a domain or series.
# Corresponds to the JSON property `parentLabels`
# @return [Google::Apis::SheetsV4::ChartData]
attr_accessor :parent_labels
# Represents a color in the RGBA color space. This representation is designed
# for simplicity of conversion to/from color representations in various
# languages over compactness; for example, the fields of this representation can
# be trivially provided to the constructor of "java.awt.Color" in Java; it can
# also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
# method in iOS; and, with just a little work, it can be easily formatted into a
# CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
# information about the absolute color space that should be used to interpret
# the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
# applications SHOULD assume the sRGB color space. Note: when color equality
# needs to be decided, implementations, unless documented otherwise, will treat
# two colors to be equal if all their red, green, blue and alpha values each
# differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
# public static java.awt.Color fromProto(Color protocolor) ` float alpha =
# protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
# java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
# ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
# float) color.getRed(); float green = (float) color.getGreen(); float blue = (
# float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
# = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
# .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
# ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
# denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
# Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
# protocolor red]; float green = [protocolor green]; float blue = [protocolor
# blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
# alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
# colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
# UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
# green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
# alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
# blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
# [result autorelease]; return result; ` // ... Example (JavaScript): // ...
# var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
# var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
# var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
# var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
# rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
# 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
# ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
# ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
# hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
# var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
# resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
# join(''); `; // ...
# Corresponds to the JSON property `selectedNodeColor`
# @return [Google::Apis::SheetsV4::Color]
attr_accessor :selected_node_color
# A color value.
# Corresponds to the JSON property `selectedNodeColorStyle`
# @return [Google::Apis::SheetsV4::ColorStyle]
attr_accessor :selected_node_color_style
# The data included in a domain or series.
# Corresponds to the JSON property `tooltips`
# @return [Google::Apis::SheetsV4::ChartData]
attr_accessor :tooltips
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@labels = args[:labels] if args.key?(:labels)
@node_color = args[:node_color] if args.key?(:node_color)
@node_color_style = args[:node_color_style] if args.key?(:node_color_style)
@node_size = args[:node_size] if args.key?(:node_size)
@parent_labels = args[:parent_labels] if args.key?(:parent_labels)
@selected_node_color = args[:selected_node_color] if args.key?(:selected_node_color)
@selected_node_color_style = args[:selected_node_color_style] if args.key?(:selected_node_color_style)
@tooltips = args[:tooltips] if args.key?(:tooltips)
end
end
# The location an object is overlaid on top of a grid.
class OverlayPosition
include Google::Apis::Core::Hashable
# A coordinate in a sheet. All indexes are zero-based.
# Corresponds to the JSON property `anchorCell`
# @return [Google::Apis::SheetsV4::GridCoordinate]
attr_accessor :anchor_cell
# The height of the object, in pixels. Defaults to 371.
# Corresponds to the JSON property `heightPixels`
# @return [Fixnum]
attr_accessor :height_pixels
# The horizontal offset, in pixels, that the object is offset from the anchor
# cell.
# Corresponds to the JSON property `offsetXPixels`
# @return [Fixnum]
attr_accessor :offset_x_pixels
# The vertical offset, in pixels, that the object is offset from the anchor cell.
# Corresponds to the JSON property `offsetYPixels`
# @return [Fixnum]
attr_accessor :offset_y_pixels
# The width of the object, in pixels. Defaults to 600.
# Corresponds to the JSON property `widthPixels`
# @return [Fixnum]
attr_accessor :width_pixels
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@anchor_cell = args[:anchor_cell] if args.key?(:anchor_cell)
@height_pixels = args[:height_pixels] if args.key?(:height_pixels)
@offset_x_pixels = args[:offset_x_pixels] if args.key?(:offset_x_pixels)
@offset_y_pixels = args[:offset_y_pixels] if args.key?(:offset_y_pixels)
@width_pixels = args[:width_pixels] if args.key?(:width_pixels)
end
end
# The amount of padding around the cell, in pixels. When updating padding, every
# field must be specified.
class Padding
include Google::Apis::Core::Hashable
# The bottom padding of the cell.
# Corresponds to the JSON property `bottom`
# @return [Fixnum]
attr_accessor :bottom
# The left padding of the cell.
# Corresponds to the JSON property `left`
# @return [Fixnum]
attr_accessor :left
# The right padding of the cell.
# Corresponds to the JSON property `right`
# @return [Fixnum]
attr_accessor :right
# The top padding of the cell.
# Corresponds to the JSON property `top`
# @return [Fixnum]
attr_accessor :top
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@bottom = args[:bottom] if args.key?(:bottom)
@left = args[:left] if args.key?(:left)
@right = args[:right] if args.key?(:right)
@top = args[:top] if args.key?(:top)
end
end
# Inserts data into the spreadsheet starting at the specified coordinate.
class PasteDataRequest
include Google::Apis::Core::Hashable
# A coordinate in a sheet. All indexes are zero-based.
# Corresponds to the JSON property `coordinate`
# @return [Google::Apis::SheetsV4::GridCoordinate]
attr_accessor :coordinate
# The data to insert.
# Corresponds to the JSON property `data`
# @return [String]
attr_accessor :data
# The delimiter in the data.
# Corresponds to the JSON property `delimiter`
# @return [String]
attr_accessor :delimiter
# True if the data is HTML.
# Corresponds to the JSON property `html`
# @return [Boolean]
attr_accessor :html
alias_method :html?, :html
# How the data should be pasted.
# Corresponds to the JSON property `type`
# @return [String]
attr_accessor :type
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@coordinate = args[:coordinate] if args.key?(:coordinate)
@data = args[:data] if args.key?(:data)
@delimiter = args[:delimiter] if args.key?(:delimiter)
@html = args[:html] if args.key?(:html)
@type = args[:type] if args.key?(:type)
end
end
# A pie chart.
class PieChartSpec
include Google::Apis::Core::Hashable
# The data included in a domain or series.
# Corresponds to the JSON property `domain`
# @return [Google::Apis::SheetsV4::ChartData]
attr_accessor :domain
# Where the legend of the pie chart should be drawn.
# Corresponds to the JSON property `legendPosition`
# @return [String]
attr_accessor :legend_position
# The size of the hole in the pie chart.
# Corresponds to the JSON property `pieHole`
# @return [Float]
attr_accessor :pie_hole
# The data included in a domain or series.
# Corresponds to the JSON property `series`
# @return [Google::Apis::SheetsV4::ChartData]
attr_accessor :series
# True if the pie is three dimensional.
# Corresponds to the JSON property `threeDimensional`
# @return [Boolean]
attr_accessor :three_dimensional
alias_method :three_dimensional?, :three_dimensional
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@domain = args[:domain] if args.key?(:domain)
@legend_position = args[:legend_position] if args.key?(:legend_position)
@pie_hole = args[:pie_hole] if args.key?(:pie_hole)
@series = args[:series] if args.key?(:series)
@three_dimensional = args[:three_dimensional] if args.key?(:three_dimensional)
end
end
# Criteria for showing/hiding rows in a pivot table.
class PivotFilterCriteria
include Google::Apis::Core::Hashable
# A condition that can evaluate to true or false. BooleanConditions are used by
# conditional formatting, data validation, and the criteria in filters.
# Corresponds to the JSON property `condition`
# @return [Google::Apis::SheetsV4::BooleanCondition]
attr_accessor :condition
# Whether values are visible by default. If true, the visible_values are ignored,
# all values that meet condition (if specified) are shown. If false, values
# that are both in visible_values and meet condition are shown.
# Corresponds to the JSON property `visibleByDefault`
# @return [Boolean]
attr_accessor :visible_by_default
alias_method :visible_by_default?, :visible_by_default
# Values that should be included. Values not listed here are excluded.
# Corresponds to the JSON property `visibleValues`
# @return [Array<String>]
attr_accessor :visible_values
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@condition = args[:condition] if args.key?(:condition)
@visible_by_default = args[:visible_by_default] if args.key?(:visible_by_default)
@visible_values = args[:visible_values] if args.key?(:visible_values)
end
end
# The pivot table filter criteria associated with a specific source column
# offset.
class PivotFilterSpec
include Google::Apis::Core::Hashable
# The column offset of the source range.
# Corresponds to the JSON property `columnOffsetIndex`
# @return [Fixnum]
attr_accessor :column_offset_index
# An unique identifier that references a data source column.
# Corresponds to the JSON property `dataSourceColumnReference`
# @return [Google::Apis::SheetsV4::DataSourceColumnReference]
attr_accessor :data_source_column_reference
# Criteria for showing/hiding rows in a pivot table.
# Corresponds to the JSON property `filterCriteria`
# @return [Google::Apis::SheetsV4::PivotFilterCriteria]
attr_accessor :filter_criteria
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@column_offset_index = args[:column_offset_index] if args.key?(:column_offset_index)
@data_source_column_reference = args[:data_source_column_reference] if args.key?(:data_source_column_reference)
@filter_criteria = args[:filter_criteria] if args.key?(:filter_criteria)
end
end
# A single grouping (either row or column) in a pivot table.
class PivotGroup
include Google::Apis::Core::Hashable
# An unique identifier that references a data source column.
# Corresponds to the JSON property `dataSourceColumnReference`
# @return [Google::Apis::SheetsV4::DataSourceColumnReference]
attr_accessor :data_source_column_reference
# The count limit on rows or columns in the pivot group.
# Corresponds to the JSON property `groupLimit`
# @return [Google::Apis::SheetsV4::PivotGroupLimit]
attr_accessor :group_limit
# An optional setting on a PivotGroup that defines buckets for the values in the
# source data column rather than breaking out each individual value. Only one
# PivotGroup with a group rule may be added for each column in the source data,
# though on any given column you may add both a PivotGroup that has a rule and a
# PivotGroup that does not.
# Corresponds to the JSON property `groupRule`
# @return [Google::Apis::SheetsV4::PivotGroupRule]
attr_accessor :group_rule
# The labels to use for the row/column groups which can be customized. For
# example, in the following pivot table, the row label is `Region` (which could
# be renamed to `State`) and the column label is `Product` (which could be
# renamed `Item`). Pivot tables created before December 2017 do not have header
# labels. If you'd like to add header labels to an existing pivot table, please
# delete the existing pivot table and then create a new pivot table with same
# parameters. +--------------+---------+-------+ | SUM of Units | Product | | |
# Region | Pen | Paper | +--------------+---------+-------+ | New York | 345 |
# 98 | | Oregon | 234 | 123 | | Tennessee | 531 | 415 | +--------------+---------
# +-------+ | Grand Total | 1110 | 636 | +--------------+---------+-------+
# Corresponds to the JSON property `label`
# @return [String]
attr_accessor :label
# True if the headings in this pivot group should be repeated. This is only
# valid for row groupings and is ignored by columns. By default, we minimize
# repitition of headings by not showing higher level headings where they are the
# same. For example, even though the third row below corresponds to "Q1 Mar", "
# Q1" is not shown because it is redundant with previous rows. Setting
# repeat_headings to true would cause "Q1" to be repeated for "Feb" and "Mar". +-
# -------------+ | Q1 | Jan | | | Feb | | | Mar | +--------+-----+ | Q1 Total | +
# --------------+
# Corresponds to the JSON property `repeatHeadings`
# @return [Boolean]
attr_accessor :repeat_headings
alias_method :repeat_headings?, :repeat_headings
# True if the pivot table should include the totals for this grouping.
# Corresponds to the JSON property `showTotals`
# @return [Boolean]
attr_accessor :show_totals
alias_method :show_totals?, :show_totals
# The order the values in this group should be sorted.
# Corresponds to the JSON property `sortOrder`
# @return [String]
attr_accessor :sort_order
# The column offset of the source range that this grouping is based on. For
# example, if the source was `C10:E15`, a `sourceColumnOffset` of `0` means this
# group refers to column `C`, whereas the offset `1` would refer to column `D`.
# Corresponds to the JSON property `sourceColumnOffset`
# @return [Fixnum]
attr_accessor :source_column_offset
# Information about which values in a pivot group should be used for sorting.
# Corresponds to the JSON property `valueBucket`
# @return [Google::Apis::SheetsV4::PivotGroupSortValueBucket]
attr_accessor :value_bucket
# Metadata about values in the grouping.
# Corresponds to the JSON property `valueMetadata`
# @return [Array<Google::Apis::SheetsV4::PivotGroupValueMetadata>]
attr_accessor :value_metadata
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data_source_column_reference = args[:data_source_column_reference] if args.key?(:data_source_column_reference)
@group_limit = args[:group_limit] if args.key?(:group_limit)
@group_rule = args[:group_rule] if args.key?(:group_rule)
@label = args[:label] if args.key?(:label)
@repeat_headings = args[:repeat_headings] if args.key?(:repeat_headings)
@show_totals = args[:show_totals] if args.key?(:show_totals)
@sort_order = args[:sort_order] if args.key?(:sort_order)
@source_column_offset = args[:source_column_offset] if args.key?(:source_column_offset)
@value_bucket = args[:value_bucket] if args.key?(:value_bucket)
@value_metadata = args[:value_metadata] if args.key?(:value_metadata)
end
end
# The count limit on rows or columns in the pivot group.
class PivotGroupLimit
include Google::Apis::Core::Hashable
# The order in which the group limit is applied to the pivot table. Pivot group
# limits are applied from lower to higher order number. Order numbers are
# normalized to consecutive integers from 0. For write request, to fully
# customize the applying orders, all pivot group limits should have this field
# set with an unique number. Otherwise, the order is determined by the index in
# the PivotTable.rows list and then the PivotTable.columns list.
# Corresponds to the JSON property `applyOrder`
# @return [Fixnum]
attr_accessor :apply_order
# The count limit.
# Corresponds to the JSON property `countLimit`
# @return [Fixnum]
attr_accessor :count_limit
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@apply_order = args[:apply_order] if args.key?(:apply_order)
@count_limit = args[:count_limit] if args.key?(:count_limit)
end
end
# An optional setting on a PivotGroup that defines buckets for the values in the
# source data column rather than breaking out each individual value. Only one
# PivotGroup with a group rule may be added for each column in the source data,
# though on any given column you may add both a PivotGroup that has a rule and a
# PivotGroup that does not.
class PivotGroupRule
include Google::Apis::Core::Hashable
# Allows you to organize the date-time values in a source data column into
# buckets based on selected parts of their date or time values. For example,
# consider a pivot table showing sales transactions by date: +----------+--------
# ------+ | Date | SUM of Sales | +----------+--------------+ | 1/1/2017 | $621.
# 14 | | 2/3/2017 | $708.84 | | 5/8/2017 | $326.84 | ... +----------+------------
# --+ Applying a date-time group rule with a DateTimeRuleType of YEAR_MONTH
# results in the following pivot table. +--------------+--------------+ |
# Grouped Date | SUM of Sales | +--------------+--------------+ | 2017-Jan | $53,
# 731.78 | | 2017-Feb | $83,475.32 | | 2017-Mar | $94,385.05 | ... +-------------
# -+--------------+
# Corresponds to the JSON property `dateTimeRule`
# @return [Google::Apis::SheetsV4::DateTimeRule]
attr_accessor :date_time_rule
# Allows you to organize the numeric values in a source data column into buckets
# of a constant size. All values from HistogramRule.start to HistogramRule.end
# are placed into groups of size HistogramRule.interval. In addition, all values
# below HistogramRule.start are placed in one group, and all values above
# HistogramRule.end are placed in another. Only HistogramRule.interval is
# required, though if HistogramRule.start and HistogramRule.end are both
# provided, HistogramRule.start must be less than HistogramRule.end. For example,
# a pivot table showing average purchase amount by age that has 50+ rows: +-----
# +-------------------+ | Age | AVERAGE of Amount | +-----+-------------------+ |
# 16 | $27.13 | | 17 | $5.24 | | 18 | $20.15 | ... +-----+-------------------+
# could be turned into a pivot table that looks like the one below by applying a
# histogram group rule with a HistogramRule.start of 25, an HistogramRule.
# interval of 20, and an HistogramRule.end of 65. +-------------+----------------
# ---+ | Grouped Age | AVERAGE of Amount | +-------------+-------------------+ |
# < 25 | $19.34 | | 25-45 | $31.43 | | 45-65 | $35.87 | | > 65 | $27.55 | +------
# -------+-------------------+ | Grand Total | $29.12 | +-------------+----------
# ---------+
# Corresponds to the JSON property `histogramRule`
# @return [Google::Apis::SheetsV4::HistogramRule]
attr_accessor :histogram_rule
# Allows you to manually organize the values in a source data column into
# buckets with names of your choosing. For example, a pivot table that
# aggregates population by state: +-------+-------------------+ | State | SUM of
# Population | +-------+-------------------+ | AK | 0.7 | | AL | 4.8 | | AR | 2.
# 9 | ... +-------+-------------------+ could be turned into a pivot table that
# aggregates population by time zone by providing a list of groups (for example,
# groupName = 'Central', items = ['AL', 'AR', 'IA', ...]) to a manual group rule.
# Note that a similar effect could be achieved by adding a time zone column to
# the source data and adjusting the pivot table. +-----------+-------------------
# + | Time Zone | SUM of Population | +-----------+-------------------+ |
# Central | 106.3 | | Eastern | 151.9 | | Mountain | 17.4 | ... +-----------+----
# ---------------+
# Corresponds to the JSON property `manualRule`
# @return [Google::Apis::SheetsV4::ManualRule]
attr_accessor :manual_rule
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@date_time_rule = args[:date_time_rule] if args.key?(:date_time_rule)
@histogram_rule = args[:histogram_rule] if args.key?(:histogram_rule)
@manual_rule = args[:manual_rule] if args.key?(:manual_rule)
end
end
# Information about which values in a pivot group should be used for sorting.
class PivotGroupSortValueBucket
include Google::Apis::Core::Hashable
# Determines the bucket from which values are chosen to sort. For example, in a
# pivot table with one row group & two column groups, the row group can list up
# to two values. The first value corresponds to a value within the first column
# group, and the second value corresponds to a value in the second column group.
# If no values are listed, this would indicate that the row should be sorted
# according to the "Grand Total" over the column groups. If a single value is
# listed, this would correspond to using the "Total" of that bucket.
# Corresponds to the JSON property `buckets`
# @return [Array<Google::Apis::SheetsV4::ExtendedValue>]
attr_accessor :buckets
# The offset in the PivotTable.values list which the values in this grouping
# should be sorted by.
# Corresponds to the JSON property `valuesIndex`
# @return [Fixnum]
attr_accessor :values_index
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@buckets = args[:buckets] if args.key?(:buckets)
@values_index = args[:values_index] if args.key?(:values_index)
end
end
# Metadata about a value in a pivot grouping.
class PivotGroupValueMetadata
include Google::Apis::Core::Hashable
# True if the data corresponding to the value is collapsed.
# Corresponds to the JSON property `collapsed`
# @return [Boolean]
attr_accessor :collapsed
alias_method :collapsed?, :collapsed
# The kinds of value that a cell in a spreadsheet can have.
# Corresponds to the JSON property `value`
# @return [Google::Apis::SheetsV4::ExtendedValue]
attr_accessor :value
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@collapsed = args[:collapsed] if args.key?(:collapsed)
@value = args[:value] if args.key?(:value)
end
end
# A pivot table.
class PivotTable
include Google::Apis::Core::Hashable
# Each column grouping in the pivot table.
# Corresponds to the JSON property `columns`
# @return [Array<Google::Apis::SheetsV4::PivotGroup>]
attr_accessor :columns
# An optional mapping of filters per source column offset. The filters are
# applied before aggregating data into the pivot table. The map's key is the
# column offset of the source range that you want to filter, and the value is
# the criteria for that column. For example, if the source was `C10:E15`, a key
# of `0` will have the filter for column `C`, whereas the key `1` is for column `
# D`. This field is deprecated in favor of filter_specs.
# Corresponds to the JSON property `criteria`
# @return [Hash<String,Google::Apis::SheetsV4::PivotFilterCriteria>]
attr_accessor :criteria
# The data execution status. A data execution is created to sync a data source
# object with the latest data from a DataSource. It is usually scheduled to run
# at background, you can check its state to tell if an execution completes There
# are several scenarios where a data execution is triggered to run: * Adding a
# data source creates an associated data source sheet as well as a data
# execution to sync the data from the data source to the sheet. * Updating a
# data source creates a data execution to refresh the associated data source
# sheet similarly. * You can send refresh request to explicitly refresh one or
# multiple data source objects.
# Corresponds to the JSON property `dataExecutionStatus`
# @return [Google::Apis::SheetsV4::DataExecutionStatus]
attr_accessor :data_execution_status
# The ID of the data source the pivot table is reading data from.
# Corresponds to the JSON property `dataSourceId`
# @return [String]
attr_accessor :data_source_id
# The filters applied to the source columns before aggregating data for the
# pivot table. Both criteria and filter_specs are populated in responses. If
# both fields are specified in an update request, this field takes precedence.
# Corresponds to the JSON property `filterSpecs`
# @return [Array<Google::Apis::SheetsV4::PivotFilterSpec>]
attr_accessor :filter_specs
# Each row grouping in the pivot table.
# Corresponds to the JSON property `rows`
# @return [Array<Google::Apis::SheetsV4::PivotGroup>]
attr_accessor :rows
# A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
# the start index is inclusive and the end index is exclusive -- [start_index,
# end_index). Missing indexes indicate the range is unbounded on that side. For
# example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
# start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
# 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
# start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
# start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
# start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
# sheet_id:0` The start index must always be less than or equal to the end index.
# If the start index equals the end index, then the range is empty. Empty
# ranges are typically not meaningful and are usually rendered in the UI as `#
# REF!`.
# Corresponds to the JSON property `source`
# @return [Google::Apis::SheetsV4::GridRange]
attr_accessor :source
# Whether values should be listed horizontally (as columns) or vertically (as
# rows).
# Corresponds to the JSON property `valueLayout`
# @return [String]
attr_accessor :value_layout
# A list of values to include in the pivot table.
# Corresponds to the JSON property `values`
# @return [Array<Google::Apis::SheetsV4::PivotValue>]
attr_accessor :values
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@columns = args[:columns] if args.key?(:columns)
@criteria = args[:criteria] if args.key?(:criteria)
@data_execution_status = args[:data_execution_status] if args.key?(:data_execution_status)
@data_source_id = args[:data_source_id] if args.key?(:data_source_id)
@filter_specs = args[:filter_specs] if args.key?(:filter_specs)
@rows = args[:rows] if args.key?(:rows)
@source = args[:source] if args.key?(:source)
@value_layout = args[:value_layout] if args.key?(:value_layout)
@values = args[:values] if args.key?(:values)
end
end
# The definition of how a value in a pivot table should be calculated.
class PivotValue
include Google::Apis::Core::Hashable
# If specified, indicates that pivot values should be displayed as the result of
# a calculation with another pivot value. For example, if
# calculated_display_type is specified as PERCENT_OF_GRAND_TOTAL, all the pivot
# values are displayed as the percentage of the grand total. In the Sheets
# editor, this is referred to as "Show As" in the value section of a pivot table.
# Corresponds to the JSON property `calculatedDisplayType`
# @return [String]
attr_accessor :calculated_display_type
# An unique identifier that references a data source column.
# Corresponds to the JSON property `dataSourceColumnReference`
# @return [Google::Apis::SheetsV4::DataSourceColumnReference]
attr_accessor :data_source_column_reference
# A custom formula to calculate the value. The formula must start with an `=`
# character.
# Corresponds to the JSON property `formula`
# @return [String]
attr_accessor :formula
# A name to use for the value.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# The column offset of the source range that this value reads from. For example,
# if the source was `C10:E15`, a `sourceColumnOffset` of `0` means this value
# refers to column `C`, whereas the offset `1` would refer to column `D`.
# Corresponds to the JSON property `sourceColumnOffset`
# @return [Fixnum]
attr_accessor :source_column_offset
# A function to summarize the value. If formula is set, the only supported
# values are SUM and CUSTOM. If sourceColumnOffset is set, then `CUSTOM` is not
# supported.
# Corresponds to the JSON property `summarizeFunction`
# @return [String]
attr_accessor :summarize_function
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@calculated_display_type = args[:calculated_display_type] if args.key?(:calculated_display_type)
@data_source_column_reference = args[:data_source_column_reference] if args.key?(:data_source_column_reference)
@formula = args[:formula] if args.key?(:formula)
@name = args[:name] if args.key?(:name)
@source_column_offset = args[:source_column_offset] if args.key?(:source_column_offset)
@summarize_function = args[:summarize_function] if args.key?(:summarize_function)
end
end
# The style of a point on the chart.
class PointStyle
include Google::Apis::Core::Hashable
# The point shape. If empty or unspecified, a default shape is used.
# Corresponds to the JSON property `shape`
# @return [String]
attr_accessor :shape
# The point size. If empty, a default size is used.
# Corresponds to the JSON property `size`
# @return [Float]
attr_accessor :size
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@shape = args[:shape] if args.key?(:shape)
@size = args[:size] if args.key?(:size)
end
end
# A protected range.
class ProtectedRange
include Google::Apis::Core::Hashable
# The description of this protected range.
# Corresponds to the JSON property `description`
# @return [String]
attr_accessor :description
# The editors of a protected range.
# Corresponds to the JSON property `editors`
# @return [Google::Apis::SheetsV4::Editors]
attr_accessor :editors
# The named range this protected range is backed by, if any. When writing, only
# one of range or named_range_id may be set.
# Corresponds to the JSON property `namedRangeId`
# @return [String]
attr_accessor :named_range_id
# The ID of the protected range. This field is read-only.
# Corresponds to the JSON property `protectedRangeId`
# @return [Fixnum]
attr_accessor :protected_range_id
# A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
# the start index is inclusive and the end index is exclusive -- [start_index,
# end_index). Missing indexes indicate the range is unbounded on that side. For
# example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
# start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
# 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
# start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
# start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
# start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
# sheet_id:0` The start index must always be less than or equal to the end index.
# If the start index equals the end index, then the range is empty. Empty
# ranges are typically not meaningful and are usually rendered in the UI as `#
# REF!`.
# Corresponds to the JSON property `range`
# @return [Google::Apis::SheetsV4::GridRange]
attr_accessor :range
# True if the user who requested this protected range can edit the protected
# area. This field is read-only.
# Corresponds to the JSON property `requestingUserCanEdit`
# @return [Boolean]
attr_accessor :requesting_user_can_edit
alias_method :requesting_user_can_edit?, :requesting_user_can_edit
# The list of unprotected ranges within a protected sheet. Unprotected ranges
# are only supported on protected sheets.
# Corresponds to the JSON property `unprotectedRanges`
# @return [Array<Google::Apis::SheetsV4::GridRange>]
attr_accessor :unprotected_ranges
# True if this protected range will show a warning when editing. Warning-based
# protection means that every user can edit data in the protected range, except
# editing will prompt a warning asking the user to confirm the edit. When
# writing: if this field is true, then editors is ignored. Additionally, if this
# field is changed from true to false and the `editors` field is not set (nor
# included in the field mask), then the editors will be set to all the editors
# in the document.
# Corresponds to the JSON property `warningOnly`
# @return [Boolean]
attr_accessor :warning_only
alias_method :warning_only?, :warning_only
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@description = args[:description] if args.key?(:description)
@editors = args[:editors] if args.key?(:editors)
@named_range_id = args[:named_range_id] if args.key?(:named_range_id)
@protected_range_id = args[:protected_range_id] if args.key?(:protected_range_id)
@range = args[:range] if args.key?(:range)
@requesting_user_can_edit = args[:requesting_user_can_edit] if args.key?(:requesting_user_can_edit)
@unprotected_ranges = args[:unprotected_ranges] if args.key?(:unprotected_ranges)
@warning_only = args[:warning_only] if args.key?(:warning_only)
end
end
# Randomizes the order of the rows in a range.
class RandomizeRangeRequest
include Google::Apis::Core::Hashable
# A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
# the start index is inclusive and the end index is exclusive -- [start_index,
# end_index). Missing indexes indicate the range is unbounded on that side. For
# example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
# start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
# 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
# start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
# start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
# start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
# sheet_id:0` The start index must always be less than or equal to the end index.
# If the start index equals the end index, then the range is empty. Empty
# ranges are typically not meaningful and are usually rendered in the UI as `#
# REF!`.
# Corresponds to the JSON property `range`
# @return [Google::Apis::SheetsV4::GridRange]
attr_accessor :range
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@range = args[:range] if args.key?(:range)
end
end
# The execution status of refreshing one data source object.
class RefreshDataSourceObjectExecutionStatus
include Google::Apis::Core::Hashable
# The data execution status. A data execution is created to sync a data source
# object with the latest data from a DataSource. It is usually scheduled to run
# at background, you can check its state to tell if an execution completes There
# are several scenarios where a data execution is triggered to run: * Adding a
# data source creates an associated data source sheet as well as a data
# execution to sync the data from the data source to the sheet. * Updating a
# data source creates a data execution to refresh the associated data source
# sheet similarly. * You can send refresh request to explicitly refresh one or
# multiple data source objects.
# Corresponds to the JSON property `dataExecutionStatus`
# @return [Google::Apis::SheetsV4::DataExecutionStatus]
attr_accessor :data_execution_status
# Reference to a data source object.
# Corresponds to the JSON property `reference`
# @return [Google::Apis::SheetsV4::DataSourceObjectReference]
attr_accessor :reference
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data_execution_status = args[:data_execution_status] if args.key?(:data_execution_status)
@reference = args[:reference] if args.key?(:reference)
end
end
# Refreshes one or multiple data source objects in the spreadsheet by the
# specified references. The request requires an additional `bigquery.readonly`
# OAuth scope. If there are multiple refresh requests referencing the same data
# source objects in one batch, only the last refresh request is processed, and
# all those requests will have the same response accordingly.
class RefreshDataSourceRequest
include Google::Apis::Core::Hashable
# Reference to a DataSource. If specified, refreshes all associated data source
# objects for the data source.
# Corresponds to the JSON property `dataSourceId`
# @return [String]
attr_accessor :data_source_id
# Refreshes the data source objects regardless of the current state. If not set
# and a referenced data source object was in error state, the refresh will fail
# immediately.
# Corresponds to the JSON property `force`
# @return [Boolean]
attr_accessor :force
alias_method :force?, :force
# Refreshes all existing data source objects in the spreadsheet.
# Corresponds to the JSON property `isAll`
# @return [Boolean]
attr_accessor :is_all
alias_method :is_all?, :is_all
# A list of references to data source objects.
# Corresponds to the JSON property `references`
# @return [Google::Apis::SheetsV4::DataSourceObjectReferences]
attr_accessor :references
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data_source_id = args[:data_source_id] if args.key?(:data_source_id)
@force = args[:force] if args.key?(:force)
@is_all = args[:is_all] if args.key?(:is_all)
@references = args[:references] if args.key?(:references)
end
end
# The response from refreshing one or multiple data source objects.
class RefreshDataSourceResponse
include Google::Apis::Core::Hashable
# All the refresh status for the data source object references specified in the
# request. If is_all is specified, the field contains only those in failure
# status.
# Corresponds to the JSON property `statuses`
# @return [Array<Google::Apis::SheetsV4::RefreshDataSourceObjectExecutionStatus>]
attr_accessor :statuses
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@statuses = args[:statuses] if args.key?(:statuses)
end
end
# Updates all cells in the range to the values in the given Cell object. Only
# the fields listed in the fields field are updated; others are unchanged. If
# writing a cell with a formula, the formula's ranges will automatically
# increment for each field in the range. For example, if writing a cell with
# formula `=A1` into range B2:C4, B2 would be `=A1`, B3 would be `=A2`, B4 would
# be `=A3`, C2 would be `=B1`, C3 would be `=B2`, C4 would be `=B3`. To keep the
# formula's ranges static, use the `$` indicator. For example, use the formula `=
# $A$1` to prevent both the row and the column from incrementing.
class RepeatCellRequest
include Google::Apis::Core::Hashable
# Data about a specific cell.
# Corresponds to the JSON property `cell`
# @return [Google::Apis::SheetsV4::CellData]
attr_accessor :cell
# The fields that should be updated. At least one field must be specified. The
# root `cell` is implied and should not be specified. A single `"*"` can be used
# as short-hand for listing every field.
# Corresponds to the JSON property `fields`
# @return [String]
attr_accessor :fields
# A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
# the start index is inclusive and the end index is exclusive -- [start_index,
# end_index). Missing indexes indicate the range is unbounded on that side. For
# example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
# start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
# 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
# start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
# start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
# start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
# sheet_id:0` The start index must always be less than or equal to the end index.
# If the start index equals the end index, then the range is empty. Empty
# ranges are typically not meaningful and are usually rendered in the UI as `#
# REF!`.
# Corresponds to the JSON property `range`
# @return [Google::Apis::SheetsV4::GridRange]
attr_accessor :range
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@cell = args[:cell] if args.key?(:cell)
@fields = args[:fields] if args.key?(:fields)
@range = args[:range] if args.key?(:range)
end
end
# A single kind of update to apply to a spreadsheet.
class Request
include Google::Apis::Core::Hashable
# Adds a new banded range to the spreadsheet.
# Corresponds to the JSON property `addBanding`
# @return [Google::Apis::SheetsV4::AddBandingRequest]
attr_accessor :add_banding
# Adds a chart to a sheet in the spreadsheet.
# Corresponds to the JSON property `addChart`
# @return [Google::Apis::SheetsV4::AddChartRequest]
attr_accessor :add_chart
# Adds a new conditional format rule at the given index. All subsequent rules'
# indexes are incremented.
# Corresponds to the JSON property `addConditionalFormatRule`
# @return [Google::Apis::SheetsV4::AddConditionalFormatRuleRequest]
attr_accessor :add_conditional_format_rule
# Adds a data source. After the data source is added successfully, an associated
# DATA_SOURCE sheet is created and an execution is triggered to refresh the
# sheet to read data from the data source. The request requires an additional `
# bigquery.readonly` OAuth scope.
# Corresponds to the JSON property `addDataSource`
# @return [Google::Apis::SheetsV4::AddDataSourceRequest]
attr_accessor :add_data_source
# Creates a group over the specified range. If the requested range is a superset
# of the range of an existing group G, then the depth of G is incremented and
# this new group G' has the depth of that group. For example, a group [C:D,
# depth 1] + [B:E] results in groups [B:E, depth 1] and [C:D, depth 2]. If the
# requested range is a subset of the range of an existing group G, then the
# depth of the new group G' becomes one greater than the depth of G. For example,
# a group [B:E, depth 1] + [C:D] results in groups [B:E, depth 1] and [C:D,
# depth 2]. If the requested range starts before and ends within, or starts
# within and ends after, the range of an existing group G, then the range of the
# existing group G becomes the union of the ranges, and the new group G' has
# depth one greater than the depth of G and range as the intersection of the
# ranges. For example, a group [B:D, depth 1] + [C:E] results in groups [B:E,
# depth 1] and [C:D, depth 2].
# Corresponds to the JSON property `addDimensionGroup`
# @return [Google::Apis::SheetsV4::AddDimensionGroupRequest]
attr_accessor :add_dimension_group
# Adds a filter view.
# Corresponds to the JSON property `addFilterView`
# @return [Google::Apis::SheetsV4::AddFilterViewRequest]
attr_accessor :add_filter_view
# Adds a named range to the spreadsheet.
# Corresponds to the JSON property `addNamedRange`
# @return [Google::Apis::SheetsV4::AddNamedRangeRequest]
attr_accessor :add_named_range
# Adds a new protected range.
# Corresponds to the JSON property `addProtectedRange`
# @return [Google::Apis::SheetsV4::AddProtectedRangeRequest]
attr_accessor :add_protected_range
# Adds a new sheet. When a sheet is added at a given index, all subsequent
# sheets' indexes are incremented. To add an object sheet, use AddChartRequest
# instead and specify EmbeddedObjectPosition.sheetId or EmbeddedObjectPosition.
# newSheet.
# Corresponds to the JSON property `addSheet`
# @return [Google::Apis::SheetsV4::AddSheetRequest]
attr_accessor :add_sheet
# Adds a slicer to a sheet in the spreadsheet.
# Corresponds to the JSON property `addSlicer`
# @return [Google::Apis::SheetsV4::AddSlicerRequest]
attr_accessor :add_slicer
# Adds new cells after the last row with data in a sheet, inserting new rows
# into the sheet if necessary.
# Corresponds to the JSON property `appendCells`
# @return [Google::Apis::SheetsV4::AppendCellsRequest]
attr_accessor :append_cells
# Appends rows or columns to the end of a sheet.
# Corresponds to the JSON property `appendDimension`
# @return [Google::Apis::SheetsV4::AppendDimensionRequest]
attr_accessor :append_dimension
# Fills in more data based on existing data.
# Corresponds to the JSON property `autoFill`
# @return [Google::Apis::SheetsV4::AutoFillRequest]
attr_accessor :auto_fill
# Automatically resizes one or more dimensions based on the contents of the
# cells in that dimension.
# Corresponds to the JSON property `autoResizeDimensions`
# @return [Google::Apis::SheetsV4::AutoResizeDimensionsRequest]
attr_accessor :auto_resize_dimensions
# Clears the basic filter, if any exists on the sheet.
# Corresponds to the JSON property `clearBasicFilter`
# @return [Google::Apis::SheetsV4::ClearBasicFilterRequest]
attr_accessor :clear_basic_filter
# Copies data from the source to the destination.
# Corresponds to the JSON property `copyPaste`
# @return [Google::Apis::SheetsV4::CopyPasteRequest]
attr_accessor :copy_paste
# A request to create developer metadata.
# Corresponds to the JSON property `createDeveloperMetadata`
# @return [Google::Apis::SheetsV4::CreateDeveloperMetadataRequest]
attr_accessor :create_developer_metadata
# Moves data from the source to the destination.
# Corresponds to the JSON property `cutPaste`
# @return [Google::Apis::SheetsV4::CutPasteRequest]
attr_accessor :cut_paste
# Removes the banded range with the given ID from the spreadsheet.
# Corresponds to the JSON property `deleteBanding`
# @return [Google::Apis::SheetsV4::DeleteBandingRequest]
attr_accessor :delete_banding
# Deletes a conditional format rule at the given index. All subsequent rules'
# indexes are decremented.
# Corresponds to the JSON property `deleteConditionalFormatRule`
# @return [Google::Apis::SheetsV4::DeleteConditionalFormatRuleRequest]
attr_accessor :delete_conditional_format_rule
# Deletes a data source. The request also deletes the associated data source
# sheet, and unlinks all associated data source objects.
# Corresponds to the JSON property `deleteDataSource`
# @return [Google::Apis::SheetsV4::DeleteDataSourceRequest]
attr_accessor :delete_data_source
# A request to delete developer metadata.
# Corresponds to the JSON property `deleteDeveloperMetadata`
# @return [Google::Apis::SheetsV4::DeleteDeveloperMetadataRequest]
attr_accessor :delete_developer_metadata
# Deletes the dimensions from the sheet.
# Corresponds to the JSON property `deleteDimension`
# @return [Google::Apis::SheetsV4::DeleteDimensionRequest]
attr_accessor :delete_dimension
# Deletes a group over the specified range by decrementing the depth of the
# dimensions in the range. For example, assume the sheet has a depth-1 group
# over B:E and a depth-2 group over C:D. Deleting a group over D:E leaves the
# sheet with a depth-1 group over B:D and a depth-2 group over C:C.
# Corresponds to the JSON property `deleteDimensionGroup`
# @return [Google::Apis::SheetsV4::DeleteDimensionGroupRequest]
attr_accessor :delete_dimension_group
# Removes rows within this range that contain values in the specified columns
# that are duplicates of values in any previous row. Rows with identical values
# but different letter cases, formatting, or formulas are considered to be
# duplicates. This request also removes duplicate rows hidden from view (for
# example, due to a filter). When removing duplicates, the first instance of
# each duplicate row scanning from the top downwards is kept in the resulting
# range. Content outside of the specified range isn't removed, and rows
# considered duplicates do not have to be adjacent to each other in the range.
# Corresponds to the JSON property `deleteDuplicates`
# @return [Google::Apis::SheetsV4::DeleteDuplicatesRequest]
attr_accessor :delete_duplicates
# Deletes the embedded object with the given ID.
# Corresponds to the JSON property `deleteEmbeddedObject`
# @return [Google::Apis::SheetsV4::DeleteEmbeddedObjectRequest]
attr_accessor :delete_embedded_object
# Deletes a particular filter view.
# Corresponds to the JSON property `deleteFilterView`
# @return [Google::Apis::SheetsV4::DeleteFilterViewRequest]
attr_accessor :delete_filter_view
# Removes the named range with the given ID from the spreadsheet.
# Corresponds to the JSON property `deleteNamedRange`
# @return [Google::Apis::SheetsV4::DeleteNamedRangeRequest]
attr_accessor :delete_named_range
# Deletes the protected range with the given ID.
# Corresponds to the JSON property `deleteProtectedRange`
# @return [Google::Apis::SheetsV4::DeleteProtectedRangeRequest]
attr_accessor :delete_protected_range
# Deletes a range of cells, shifting other cells into the deleted area.
# Corresponds to the JSON property `deleteRange`
# @return [Google::Apis::SheetsV4::DeleteRangeRequest]
attr_accessor :delete_range
# Deletes the requested sheet.
# Corresponds to the JSON property `deleteSheet`
# @return [Google::Apis::SheetsV4::DeleteSheetRequest]
attr_accessor :delete_sheet
# Duplicates a particular filter view.
# Corresponds to the JSON property `duplicateFilterView`
# @return [Google::Apis::SheetsV4::DuplicateFilterViewRequest]
attr_accessor :duplicate_filter_view
# Duplicates the contents of a sheet.
# Corresponds to the JSON property `duplicateSheet`
# @return [Google::Apis::SheetsV4::DuplicateSheetRequest]
attr_accessor :duplicate_sheet
# Finds and replaces data in cells over a range, sheet, or all sheets.
# Corresponds to the JSON property `findReplace`
# @return [Google::Apis::SheetsV4::FindReplaceRequest]
attr_accessor :find_replace
# Inserts rows or columns in a sheet at a particular index.
# Corresponds to the JSON property `insertDimension`
# @return [Google::Apis::SheetsV4::InsertDimensionRequest]
attr_accessor :insert_dimension
# Inserts cells into a range, shifting the existing cells over or down.
# Corresponds to the JSON property `insertRange`
# @return [Google::Apis::SheetsV4::InsertRangeRequest]
attr_accessor :insert_range
# Merges all cells in the range.
# Corresponds to the JSON property `mergeCells`
# @return [Google::Apis::SheetsV4::MergeCellsRequest]
attr_accessor :merge_cells
# Moves one or more rows or columns.
# Corresponds to the JSON property `moveDimension`
# @return [Google::Apis::SheetsV4::MoveDimensionRequest]
attr_accessor :move_dimension
# Inserts data into the spreadsheet starting at the specified coordinate.
# Corresponds to the JSON property `pasteData`
# @return [Google::Apis::SheetsV4::PasteDataRequest]
attr_accessor :paste_data
# Randomizes the order of the rows in a range.
# Corresponds to the JSON property `randomizeRange`
# @return [Google::Apis::SheetsV4::RandomizeRangeRequest]
attr_accessor :randomize_range
# Refreshes one or multiple data source objects in the spreadsheet by the
# specified references. The request requires an additional `bigquery.readonly`
# OAuth scope. If there are multiple refresh requests referencing the same data
# source objects in one batch, only the last refresh request is processed, and
# all those requests will have the same response accordingly.
# Corresponds to the JSON property `refreshDataSource`
# @return [Google::Apis::SheetsV4::RefreshDataSourceRequest]
attr_accessor :refresh_data_source
# Updates all cells in the range to the values in the given Cell object. Only
# the fields listed in the fields field are updated; others are unchanged. If
# writing a cell with a formula, the formula's ranges will automatically
# increment for each field in the range. For example, if writing a cell with
# formula `=A1` into range B2:C4, B2 would be `=A1`, B3 would be `=A2`, B4 would
# be `=A3`, C2 would be `=B1`, C3 would be `=B2`, C4 would be `=B3`. To keep the
# formula's ranges static, use the `$` indicator. For example, use the formula `=
# $A$1` to prevent both the row and the column from incrementing.
# Corresponds to the JSON property `repeatCell`
# @return [Google::Apis::SheetsV4::RepeatCellRequest]
attr_accessor :repeat_cell
# Sets the basic filter associated with a sheet.
# Corresponds to the JSON property `setBasicFilter`
# @return [Google::Apis::SheetsV4::SetBasicFilterRequest]
attr_accessor :set_basic_filter
# Sets a data validation rule to every cell in the range. To clear validation in
# a range, call this with no rule specified.
# Corresponds to the JSON property `setDataValidation`
# @return [Google::Apis::SheetsV4::SetDataValidationRequest]
attr_accessor :set_data_validation
# Sorts data in rows based on a sort order per column.
# Corresponds to the JSON property `sortRange`
# @return [Google::Apis::SheetsV4::SortRangeRequest]
attr_accessor :sort_range
# Splits a column of text into multiple columns, based on a delimiter in each
# cell.
# Corresponds to the JSON property `textToColumns`
# @return [Google::Apis::SheetsV4::TextToColumnsRequest]
attr_accessor :text_to_columns
# Trims the whitespace (such as spaces, tabs, or new lines) in every cell in the
# specified range. This request removes all whitespace from the start and end of
# each cell's text, and reduces any subsequence of remaining whitespace
# characters to a single space. If the resulting trimmed text starts with a '+'
# or '=' character, the text remains as a string value and isn't interpreted as
# a formula.
# Corresponds to the JSON property `trimWhitespace`
# @return [Google::Apis::SheetsV4::TrimWhitespaceRequest]
attr_accessor :trim_whitespace
# Unmerges cells in the given range.
# Corresponds to the JSON property `unmergeCells`
# @return [Google::Apis::SheetsV4::UnmergeCellsRequest]
attr_accessor :unmerge_cells
# Updates properties of the supplied banded range.
# Corresponds to the JSON property `updateBanding`
# @return [Google::Apis::SheetsV4::UpdateBandingRequest]
attr_accessor :update_banding
# Updates the borders of a range. If a field is not set in the request, that
# means the border remains as-is. For example, with two subsequent
# UpdateBordersRequest: 1. range: A1:A5 `` top: RED, bottom: WHITE `` 2. range:
# A1:A5 `` left: BLUE `` That would result in A1:A5 having a borders of `` top:
# RED, bottom: WHITE, left: BLUE ``. If you want to clear a border, explicitly
# set the style to NONE.
# Corresponds to the JSON property `updateBorders`
# @return [Google::Apis::SheetsV4::UpdateBordersRequest]
attr_accessor :update_borders
# Updates all cells in a range with new data.
# Corresponds to the JSON property `updateCells`
# @return [Google::Apis::SheetsV4::UpdateCellsRequest]
attr_accessor :update_cells
# Updates a chart's specifications. (This does not move or resize a chart. To
# move or resize a chart, use UpdateEmbeddedObjectPositionRequest.)
# Corresponds to the JSON property `updateChartSpec`
# @return [Google::Apis::SheetsV4::UpdateChartSpecRequest]
attr_accessor :update_chart_spec
# Updates a conditional format rule at the given index, or moves a conditional
# format rule to another index.
# Corresponds to the JSON property `updateConditionalFormatRule`
# @return [Google::Apis::SheetsV4::UpdateConditionalFormatRuleRequest]
attr_accessor :update_conditional_format_rule
# Updates a data source. After the data source is updated successfully, an
# execution is triggered to refresh the associated DATA_SOURCE sheet to read
# data from the updated data source. The request requires an additional `
# bigquery.readonly` OAuth scope.
# Corresponds to the JSON property `updateDataSource`
# @return [Google::Apis::SheetsV4::UpdateDataSourceRequest]
attr_accessor :update_data_source
# A request to update properties of developer metadata. Updates the properties
# of the developer metadata selected by the filters to the values provided in
# the DeveloperMetadata resource. Callers must specify the properties they wish
# to update in the fields parameter, as well as specify at least one DataFilter
# matching the metadata they wish to update.
# Corresponds to the JSON property `updateDeveloperMetadata`
# @return [Google::Apis::SheetsV4::UpdateDeveloperMetadataRequest]
attr_accessor :update_developer_metadata
# Updates the state of the specified group.
# Corresponds to the JSON property `updateDimensionGroup`
# @return [Google::Apis::SheetsV4::UpdateDimensionGroupRequest]
attr_accessor :update_dimension_group
# Updates properties of dimensions within the specified range.
# Corresponds to the JSON property `updateDimensionProperties`
# @return [Google::Apis::SheetsV4::UpdateDimensionPropertiesRequest]
attr_accessor :update_dimension_properties
# Updates an embedded object's border property.
# Corresponds to the JSON property `updateEmbeddedObjectBorder`
# @return [Google::Apis::SheetsV4::UpdateEmbeddedObjectBorderRequest]
attr_accessor :update_embedded_object_border
# Update an embedded object's position (such as a moving or resizing a chart or
# image).
# Corresponds to the JSON property `updateEmbeddedObjectPosition`
# @return [Google::Apis::SheetsV4::UpdateEmbeddedObjectPositionRequest]
attr_accessor :update_embedded_object_position
# Updates properties of the filter view.
# Corresponds to the JSON property `updateFilterView`
# @return [Google::Apis::SheetsV4::UpdateFilterViewRequest]
attr_accessor :update_filter_view
# Updates properties of the named range with the specified namedRangeId.
# Corresponds to the JSON property `updateNamedRange`
# @return [Google::Apis::SheetsV4::UpdateNamedRangeRequest]
attr_accessor :update_named_range
# Updates an existing protected range with the specified protectedRangeId.
# Corresponds to the JSON property `updateProtectedRange`
# @return [Google::Apis::SheetsV4::UpdateProtectedRangeRequest]
attr_accessor :update_protected_range
# Updates properties of the sheet with the specified sheetId.
# Corresponds to the JSON property `updateSheetProperties`
# @return [Google::Apis::SheetsV4::UpdateSheetPropertiesRequest]
attr_accessor :update_sheet_properties
# Updates a slicer's specifications. (This does not move or resize a slicer. To
# move or resize a slicer use UpdateEmbeddedObjectPositionRequest.
# Corresponds to the JSON property `updateSlicerSpec`
# @return [Google::Apis::SheetsV4::UpdateSlicerSpecRequest]
attr_accessor :update_slicer_spec
# Updates properties of a spreadsheet.
# Corresponds to the JSON property `updateSpreadsheetProperties`
# @return [Google::Apis::SheetsV4::UpdateSpreadsheetPropertiesRequest]
attr_accessor :update_spreadsheet_properties
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@add_banding = args[:add_banding] if args.key?(:add_banding)
@add_chart = args[:add_chart] if args.key?(:add_chart)
@add_conditional_format_rule = args[:add_conditional_format_rule] if args.key?(:add_conditional_format_rule)
@add_data_source = args[:add_data_source] if args.key?(:add_data_source)
@add_dimension_group = args[:add_dimension_group] if args.key?(:add_dimension_group)
@add_filter_view = args[:add_filter_view] if args.key?(:add_filter_view)
@add_named_range = args[:add_named_range] if args.key?(:add_named_range)
@add_protected_range = args[:add_protected_range] if args.key?(:add_protected_range)
@add_sheet = args[:add_sheet] if args.key?(:add_sheet)
@add_slicer = args[:add_slicer] if args.key?(:add_slicer)
@append_cells = args[:append_cells] if args.key?(:append_cells)
@append_dimension = args[:append_dimension] if args.key?(:append_dimension)
@auto_fill = args[:auto_fill] if args.key?(:auto_fill)
@auto_resize_dimensions = args[:auto_resize_dimensions] if args.key?(:auto_resize_dimensions)
@clear_basic_filter = args[:clear_basic_filter] if args.key?(:clear_basic_filter)
@copy_paste = args[:copy_paste] if args.key?(:copy_paste)
@create_developer_metadata = args[:create_developer_metadata] if args.key?(:create_developer_metadata)
@cut_paste = args[:cut_paste] if args.key?(:cut_paste)
@delete_banding = args[:delete_banding] if args.key?(:delete_banding)
@delete_conditional_format_rule = args[:delete_conditional_format_rule] if args.key?(:delete_conditional_format_rule)
@delete_data_source = args[:delete_data_source] if args.key?(:delete_data_source)
@delete_developer_metadata = args[:delete_developer_metadata] if args.key?(:delete_developer_metadata)
@delete_dimension = args[:delete_dimension] if args.key?(:delete_dimension)
@delete_dimension_group = args[:delete_dimension_group] if args.key?(:delete_dimension_group)
@delete_duplicates = args[:delete_duplicates] if args.key?(:delete_duplicates)
@delete_embedded_object = args[:delete_embedded_object] if args.key?(:delete_embedded_object)
@delete_filter_view = args[:delete_filter_view] if args.key?(:delete_filter_view)
@delete_named_range = args[:delete_named_range] if args.key?(:delete_named_range)
@delete_protected_range = args[:delete_protected_range] if args.key?(:delete_protected_range)
@delete_range = args[:delete_range] if args.key?(:delete_range)
@delete_sheet = args[:delete_sheet] if args.key?(:delete_sheet)
@duplicate_filter_view = args[:duplicate_filter_view] if args.key?(:duplicate_filter_view)
@duplicate_sheet = args[:duplicate_sheet] if args.key?(:duplicate_sheet)
@find_replace = args[:find_replace] if args.key?(:find_replace)
@insert_dimension = args[:insert_dimension] if args.key?(:insert_dimension)
@insert_range = args[:insert_range] if args.key?(:insert_range)
@merge_cells = args[:merge_cells] if args.key?(:merge_cells)
@move_dimension = args[:move_dimension] if args.key?(:move_dimension)
@paste_data = args[:paste_data] if args.key?(:paste_data)
@randomize_range = args[:randomize_range] if args.key?(:randomize_range)
@refresh_data_source = args[:refresh_data_source] if args.key?(:refresh_data_source)
@repeat_cell = args[:repeat_cell] if args.key?(:repeat_cell)
@set_basic_filter = args[:set_basic_filter] if args.key?(:set_basic_filter)
@set_data_validation = args[:set_data_validation] if args.key?(:set_data_validation)
@sort_range = args[:sort_range] if args.key?(:sort_range)
@text_to_columns = args[:text_to_columns] if args.key?(:text_to_columns)
@trim_whitespace = args[:trim_whitespace] if args.key?(:trim_whitespace)
@unmerge_cells = args[:unmerge_cells] if args.key?(:unmerge_cells)
@update_banding = args[:update_banding] if args.key?(:update_banding)
@update_borders = args[:update_borders] if args.key?(:update_borders)
@update_cells = args[:update_cells] if args.key?(:update_cells)
@update_chart_spec = args[:update_chart_spec] if args.key?(:update_chart_spec)
@update_conditional_format_rule = args[:update_conditional_format_rule] if args.key?(:update_conditional_format_rule)
@update_data_source = args[:update_data_source] if args.key?(:update_data_source)
@update_developer_metadata = args[:update_developer_metadata] if args.key?(:update_developer_metadata)
@update_dimension_group = args[:update_dimension_group] if args.key?(:update_dimension_group)
@update_dimension_properties = args[:update_dimension_properties] if args.key?(:update_dimension_properties)
@update_embedded_object_border = args[:update_embedded_object_border] if args.key?(:update_embedded_object_border)
@update_embedded_object_position = args[:update_embedded_object_position] if args.key?(:update_embedded_object_position)
@update_filter_view = args[:update_filter_view] if args.key?(:update_filter_view)
@update_named_range = args[:update_named_range] if args.key?(:update_named_range)
@update_protected_range = args[:update_protected_range] if args.key?(:update_protected_range)
@update_sheet_properties = args[:update_sheet_properties] if args.key?(:update_sheet_properties)
@update_slicer_spec = args[:update_slicer_spec] if args.key?(:update_slicer_spec)
@update_spreadsheet_properties = args[:update_spreadsheet_properties] if args.key?(:update_spreadsheet_properties)
end
end
# A single response from an update.
class Response
include Google::Apis::Core::Hashable
# The result of adding a banded range.
# Corresponds to the JSON property `addBanding`
# @return [Google::Apis::SheetsV4::AddBandingResponse]
attr_accessor :add_banding
# The result of adding a chart to a spreadsheet.
# Corresponds to the JSON property `addChart`
# @return [Google::Apis::SheetsV4::AddChartResponse]
attr_accessor :add_chart
# The result of adding a data source.
# Corresponds to the JSON property `addDataSource`
# @return [Google::Apis::SheetsV4::AddDataSourceResponse]
attr_accessor :add_data_source
# The result of adding a group.
# Corresponds to the JSON property `addDimensionGroup`
# @return [Google::Apis::SheetsV4::AddDimensionGroupResponse]
attr_accessor :add_dimension_group
# The result of adding a filter view.
# Corresponds to the JSON property `addFilterView`
# @return [Google::Apis::SheetsV4::AddFilterViewResponse]
attr_accessor :add_filter_view
# The result of adding a named range.
# Corresponds to the JSON property `addNamedRange`
# @return [Google::Apis::SheetsV4::AddNamedRangeResponse]
attr_accessor :add_named_range
# The result of adding a new protected range.
# Corresponds to the JSON property `addProtectedRange`
# @return [Google::Apis::SheetsV4::AddProtectedRangeResponse]
attr_accessor :add_protected_range
# The result of adding a sheet.
# Corresponds to the JSON property `addSheet`
# @return [Google::Apis::SheetsV4::AddSheetResponse]
attr_accessor :add_sheet
# The result of adding a slicer to a spreadsheet.
# Corresponds to the JSON property `addSlicer`
# @return [Google::Apis::SheetsV4::AddSlicerResponse]
attr_accessor :add_slicer
# The response from creating developer metadata.
# Corresponds to the JSON property `createDeveloperMetadata`
# @return [Google::Apis::SheetsV4::CreateDeveloperMetadataResponse]
attr_accessor :create_developer_metadata
# The result of deleting a conditional format rule.
# Corresponds to the JSON property `deleteConditionalFormatRule`
# @return [Google::Apis::SheetsV4::DeleteConditionalFormatRuleResponse]
attr_accessor :delete_conditional_format_rule
# The response from deleting developer metadata.
# Corresponds to the JSON property `deleteDeveloperMetadata`
# @return [Google::Apis::SheetsV4::DeleteDeveloperMetadataResponse]
attr_accessor :delete_developer_metadata
# The result of deleting a group.
# Corresponds to the JSON property `deleteDimensionGroup`
# @return [Google::Apis::SheetsV4::DeleteDimensionGroupResponse]
attr_accessor :delete_dimension_group
# The result of removing duplicates in a range.
# Corresponds to the JSON property `deleteDuplicates`
# @return [Google::Apis::SheetsV4::DeleteDuplicatesResponse]
attr_accessor :delete_duplicates
# The result of a filter view being duplicated.
# Corresponds to the JSON property `duplicateFilterView`
# @return [Google::Apis::SheetsV4::DuplicateFilterViewResponse]
attr_accessor :duplicate_filter_view
# The result of duplicating a sheet.
# Corresponds to the JSON property `duplicateSheet`
# @return [Google::Apis::SheetsV4::DuplicateSheetResponse]
attr_accessor :duplicate_sheet
# The result of the find/replace.
# Corresponds to the JSON property `findReplace`
# @return [Google::Apis::SheetsV4::FindReplaceResponse]
attr_accessor :find_replace
# The response from refreshing one or multiple data source objects.
# Corresponds to the JSON property `refreshDataSource`
# @return [Google::Apis::SheetsV4::RefreshDataSourceResponse]
attr_accessor :refresh_data_source
# The result of trimming whitespace in cells.
# Corresponds to the JSON property `trimWhitespace`
# @return [Google::Apis::SheetsV4::TrimWhitespaceResponse]
attr_accessor :trim_whitespace
# The result of updating a conditional format rule.
# Corresponds to the JSON property `updateConditionalFormatRule`
# @return [Google::Apis::SheetsV4::UpdateConditionalFormatRuleResponse]
attr_accessor :update_conditional_format_rule
# The response from updating data source.
# Corresponds to the JSON property `updateDataSource`
# @return [Google::Apis::SheetsV4::UpdateDataSourceResponse]
attr_accessor :update_data_source
# The response from updating developer metadata.
# Corresponds to the JSON property `updateDeveloperMetadata`
# @return [Google::Apis::SheetsV4::UpdateDeveloperMetadataResponse]
attr_accessor :update_developer_metadata
# The result of updating an embedded object's position.
# Corresponds to the JSON property `updateEmbeddedObjectPosition`
# @return [Google::Apis::SheetsV4::UpdateEmbeddedObjectPositionResponse]
attr_accessor :update_embedded_object_position
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@add_banding = args[:add_banding] if args.key?(:add_banding)
@add_chart = args[:add_chart] if args.key?(:add_chart)
@add_data_source = args[:add_data_source] if args.key?(:add_data_source)
@add_dimension_group = args[:add_dimension_group] if args.key?(:add_dimension_group)
@add_filter_view = args[:add_filter_view] if args.key?(:add_filter_view)
@add_named_range = args[:add_named_range] if args.key?(:add_named_range)
@add_protected_range = args[:add_protected_range] if args.key?(:add_protected_range)
@add_sheet = args[:add_sheet] if args.key?(:add_sheet)
@add_slicer = args[:add_slicer] if args.key?(:add_slicer)
@create_developer_metadata = args[:create_developer_metadata] if args.key?(:create_developer_metadata)
@delete_conditional_format_rule = args[:delete_conditional_format_rule] if args.key?(:delete_conditional_format_rule)
@delete_developer_metadata = args[:delete_developer_metadata] if args.key?(:delete_developer_metadata)
@delete_dimension_group = args[:delete_dimension_group] if args.key?(:delete_dimension_group)
@delete_duplicates = args[:delete_duplicates] if args.key?(:delete_duplicates)
@duplicate_filter_view = args[:duplicate_filter_view] if args.key?(:duplicate_filter_view)
@duplicate_sheet = args[:duplicate_sheet] if args.key?(:duplicate_sheet)
@find_replace = args[:find_replace] if args.key?(:find_replace)
@refresh_data_source = args[:refresh_data_source] if args.key?(:refresh_data_source)
@trim_whitespace = args[:trim_whitespace] if args.key?(:trim_whitespace)
@update_conditional_format_rule = args[:update_conditional_format_rule] if args.key?(:update_conditional_format_rule)
@update_data_source = args[:update_data_source] if args.key?(:update_data_source)
@update_developer_metadata = args[:update_developer_metadata] if args.key?(:update_developer_metadata)
@update_embedded_object_position = args[:update_embedded_object_position] if args.key?(:update_embedded_object_position)
end
end
# Data about each cell in a row.
class RowData
include Google::Apis::Core::Hashable
# The values in the row, one per column.
# Corresponds to the JSON property `values`
# @return [Array<Google::Apis::SheetsV4::CellData>]
attr_accessor :values
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@values = args[:values] if args.key?(:values)
end
end
# A scorecard chart. Scorecard charts are used to highlight key performance
# indicators, known as KPIs, on the spreadsheet. A scorecard chart can represent
# things like total sales, average cost, or a top selling item. You can specify
# a single data value, or aggregate over a range of data. Percentage or absolute
# difference from a baseline value can be highlighted, like changes over time.
class ScorecardChartSpec
include Google::Apis::Core::Hashable
# The aggregation type for key and baseline chart data in scorecard chart. This
# field is not supported for data source charts. Use the ChartData.aggregateType
# field of the key_value_data or baseline_value_data instead for data source
# charts. This field is optional.
# Corresponds to the JSON property `aggregateType`
# @return [String]
attr_accessor :aggregate_type
# The data included in a domain or series.
# Corresponds to the JSON property `baselineValueData`
# @return [Google::Apis::SheetsV4::ChartData]
attr_accessor :baseline_value_data
# Formatting options for baseline value.
# Corresponds to the JSON property `baselineValueFormat`
# @return [Google::Apis::SheetsV4::BaselineValueFormat]
attr_accessor :baseline_value_format
# Custom number formatting options for chart attributes.
# Corresponds to the JSON property `customFormatOptions`
# @return [Google::Apis::SheetsV4::ChartCustomNumberFormatOptions]
attr_accessor :custom_format_options
# The data included in a domain or series.
# Corresponds to the JSON property `keyValueData`
# @return [Google::Apis::SheetsV4::ChartData]
attr_accessor :key_value_data
# Formatting options for key value.
# Corresponds to the JSON property `keyValueFormat`
# @return [Google::Apis::SheetsV4::KeyValueFormat]
attr_accessor :key_value_format
# The number format source used in the scorecard chart. This field is optional.
# Corresponds to the JSON property `numberFormatSource`
# @return [String]
attr_accessor :number_format_source
# Value to scale scorecard key and baseline value. For example, a factor of 10
# can be used to divide all values in the chart by 10. This field is optional.
# Corresponds to the JSON property `scaleFactor`
# @return [Float]
attr_accessor :scale_factor
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@aggregate_type = args[:aggregate_type] if args.key?(:aggregate_type)
@baseline_value_data = args[:baseline_value_data] if args.key?(:baseline_value_data)
@baseline_value_format = args[:baseline_value_format] if args.key?(:baseline_value_format)
@custom_format_options = args[:custom_format_options] if args.key?(:custom_format_options)
@key_value_data = args[:key_value_data] if args.key?(:key_value_data)
@key_value_format = args[:key_value_format] if args.key?(:key_value_format)
@number_format_source = args[:number_format_source] if args.key?(:number_format_source)
@scale_factor = args[:scale_factor] if args.key?(:scale_factor)
end
end
# A request to retrieve all developer metadata matching the set of specified
# criteria.
class SearchDeveloperMetadataRequest
include Google::Apis::Core::Hashable
# The data filters describing the criteria used to determine which
# DeveloperMetadata entries to return. DeveloperMetadata matching any of the
# specified filters are included in the response.
# Corresponds to the JSON property `dataFilters`
# @return [Array<Google::Apis::SheetsV4::DataFilter>]
attr_accessor :data_filters
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data_filters = args[:data_filters] if args.key?(:data_filters)
end
end
# A reply to a developer metadata search request.
class SearchDeveloperMetadataResponse
include Google::Apis::Core::Hashable
# The metadata matching the criteria of the search request.
# Corresponds to the JSON property `matchedDeveloperMetadata`
# @return [Array<Google::Apis::SheetsV4::MatchedDeveloperMetadata>]
attr_accessor :matched_developer_metadata
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@matched_developer_metadata = args[:matched_developer_metadata] if args.key?(:matched_developer_metadata)
end
end
# Sets the basic filter associated with a sheet.
class SetBasicFilterRequest
include Google::Apis::Core::Hashable
# The default filter associated with a sheet.
# Corresponds to the JSON property `filter`
# @return [Google::Apis::SheetsV4::BasicFilter]
attr_accessor :filter
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@filter = args[:filter] if args.key?(:filter)
end
end
# Sets a data validation rule to every cell in the range. To clear validation in
# a range, call this with no rule specified.
class SetDataValidationRequest
include Google::Apis::Core::Hashable
# A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
# the start index is inclusive and the end index is exclusive -- [start_index,
# end_index). Missing indexes indicate the range is unbounded on that side. For
# example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
# start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
# 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
# start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
# start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
# start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
# sheet_id:0` The start index must always be less than or equal to the end index.
# If the start index equals the end index, then the range is empty. Empty
# ranges are typically not meaningful and are usually rendered in the UI as `#
# REF!`.
# Corresponds to the JSON property `range`
# @return [Google::Apis::SheetsV4::GridRange]
attr_accessor :range
# A data validation rule.
# Corresponds to the JSON property `rule`
# @return [Google::Apis::SheetsV4::DataValidationRule]
attr_accessor :rule
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@range = args[:range] if args.key?(:range)
@rule = args[:rule] if args.key?(:rule)
end
end
# A sheet in a spreadsheet.
class Sheet
include Google::Apis::Core::Hashable
# The banded (alternating colors) ranges on this sheet.
# Corresponds to the JSON property `bandedRanges`
# @return [Array<Google::Apis::SheetsV4::BandedRange>]
attr_accessor :banded_ranges
# The default filter associated with a sheet.
# Corresponds to the JSON property `basicFilter`
# @return [Google::Apis::SheetsV4::BasicFilter]
attr_accessor :basic_filter
# The specifications of every chart on this sheet.
# Corresponds to the JSON property `charts`
# @return [Array<Google::Apis::SheetsV4::EmbeddedChart>]
attr_accessor :charts
# All column groups on this sheet, ordered by increasing range start index, then
# by group depth.
# Corresponds to the JSON property `columnGroups`
# @return [Array<Google::Apis::SheetsV4::DimensionGroup>]
attr_accessor :column_groups
# The conditional format rules in this sheet.
# Corresponds to the JSON property `conditionalFormats`
# @return [Array<Google::Apis::SheetsV4::ConditionalFormatRule>]
attr_accessor :conditional_formats
# Data in the grid, if this is a grid sheet. The number of GridData objects
# returned is dependent on the number of ranges requested on this sheet. For
# example, if this is representing `Sheet1`, and the spreadsheet was requested
# with ranges `Sheet1!A1:C10` and `Sheet1!D15:E20`, then the first GridData will
# have a startRow/startColumn of `0`, while the second one will have `startRow
# 14` (zero-based row 15), and `startColumn 3` (zero-based column D). For a
# DATA_SOURCE sheet, you can not request a specific range, the GridData contains
# all the values.
# Corresponds to the JSON property `data`
# @return [Array<Google::Apis::SheetsV4::GridData>]
attr_accessor :data
# The developer metadata associated with a sheet.
# Corresponds to the JSON property `developerMetadata`
# @return [Array<Google::Apis::SheetsV4::DeveloperMetadata>]
attr_accessor :developer_metadata
# The filter views in this sheet.
# Corresponds to the JSON property `filterViews`
# @return [Array<Google::Apis::SheetsV4::FilterView>]
attr_accessor :filter_views
# The ranges that are merged together.
# Corresponds to the JSON property `merges`
# @return [Array<Google::Apis::SheetsV4::GridRange>]
attr_accessor :merges
# Properties of a sheet.
# Corresponds to the JSON property `properties`
# @return [Google::Apis::SheetsV4::SheetProperties]
attr_accessor :properties
# The protected ranges in this sheet.
# Corresponds to the JSON property `protectedRanges`
# @return [Array<Google::Apis::SheetsV4::ProtectedRange>]
attr_accessor :protected_ranges
# All row groups on this sheet, ordered by increasing range start index, then by
# group depth.
# Corresponds to the JSON property `rowGroups`
# @return [Array<Google::Apis::SheetsV4::DimensionGroup>]
attr_accessor :row_groups
# The slicers on this sheet.
# Corresponds to the JSON property `slicers`
# @return [Array<Google::Apis::SheetsV4::Slicer>]
attr_accessor :slicers
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@banded_ranges = args[:banded_ranges] if args.key?(:banded_ranges)
@basic_filter = args[:basic_filter] if args.key?(:basic_filter)
@charts = args[:charts] if args.key?(:charts)
@column_groups = args[:column_groups] if args.key?(:column_groups)
@conditional_formats = args[:conditional_formats] if args.key?(:conditional_formats)
@data = args[:data] if args.key?(:data)
@developer_metadata = args[:developer_metadata] if args.key?(:developer_metadata)
@filter_views = args[:filter_views] if args.key?(:filter_views)
@merges = args[:merges] if args.key?(:merges)
@properties = args[:properties] if args.key?(:properties)
@protected_ranges = args[:protected_ranges] if args.key?(:protected_ranges)
@row_groups = args[:row_groups] if args.key?(:row_groups)
@slicers = args[:slicers] if args.key?(:slicers)
end
end
# Properties of a sheet.
class SheetProperties
include Google::Apis::Core::Hashable
# Additional properties of a DATA_SOURCE sheet.
# Corresponds to the JSON property `dataSourceSheetProperties`
# @return [Google::Apis::SheetsV4::DataSourceSheetProperties]
attr_accessor :data_source_sheet_properties
# Properties of a grid.
# Corresponds to the JSON property `gridProperties`
# @return [Google::Apis::SheetsV4::GridProperties]
attr_accessor :grid_properties
# True if the sheet is hidden in the UI, false if it's visible.
# Corresponds to the JSON property `hidden`
# @return [Boolean]
attr_accessor :hidden
alias_method :hidden?, :hidden
# The index of the sheet within the spreadsheet. When adding or updating sheet
# properties, if this field is excluded then the sheet is added or moved to the
# end of the sheet list. When updating sheet indices or inserting sheets,
# movement is considered in "before the move" indexes. For example, if there
# were 3 sheets (S1, S2, S3) in order to move S1 ahead of S2 the index would
# have to be set to 2. A sheet index update request is ignored if the requested
# index is identical to the sheets current index or if the requested new index
# is equal to the current sheet index + 1.
# Corresponds to the JSON property `index`
# @return [Fixnum]
attr_accessor :index
# True if the sheet is an RTL sheet instead of an LTR sheet.
# Corresponds to the JSON property `rightToLeft`
# @return [Boolean]
attr_accessor :right_to_left
alias_method :right_to_left?, :right_to_left
# The ID of the sheet. Must be non-negative. This field cannot be changed once
# set.
# Corresponds to the JSON property `sheetId`
# @return [Fixnum]
attr_accessor :sheet_id
# The type of sheet. Defaults to GRID. This field cannot be changed once set.
# Corresponds to the JSON property `sheetType`
# @return [String]
attr_accessor :sheet_type
# Represents a color in the RGBA color space. This representation is designed
# for simplicity of conversion to/from color representations in various
# languages over compactness; for example, the fields of this representation can
# be trivially provided to the constructor of "java.awt.Color" in Java; it can
# also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
# method in iOS; and, with just a little work, it can be easily formatted into a
# CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
# information about the absolute color space that should be used to interpret
# the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
# applications SHOULD assume the sRGB color space. Note: when color equality
# needs to be decided, implementations, unless documented otherwise, will treat
# two colors to be equal if all their red, green, blue and alpha values each
# differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
# public static java.awt.Color fromProto(Color protocolor) ` float alpha =
# protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
# java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
# ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
# float) color.getRed(); float green = (float) color.getGreen(); float blue = (
# float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
# = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
# .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
# ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
# denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
# Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
# protocolor red]; float green = [protocolor green]; float blue = [protocolor
# blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
# alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
# colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
# UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
# green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
# alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
# blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
# [result autorelease]; return result; ` // ... Example (JavaScript): // ...
# var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
# var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
# var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
# var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
# rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
# 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
# ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
# ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
# hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
# var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
# resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
# join(''); `; // ...
# Corresponds to the JSON property `tabColor`
# @return [Google::Apis::SheetsV4::Color]
attr_accessor :tab_color
# A color value.
# Corresponds to the JSON property `tabColorStyle`
# @return [Google::Apis::SheetsV4::ColorStyle]
attr_accessor :tab_color_style
# The name of the sheet.
# Corresponds to the JSON property `title`
# @return [String]
attr_accessor :title
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data_source_sheet_properties = args[:data_source_sheet_properties] if args.key?(:data_source_sheet_properties)
@grid_properties = args[:grid_properties] if args.key?(:grid_properties)
@hidden = args[:hidden] if args.key?(:hidden)
@index = args[:index] if args.key?(:index)
@right_to_left = args[:right_to_left] if args.key?(:right_to_left)
@sheet_id = args[:sheet_id] if args.key?(:sheet_id)
@sheet_type = args[:sheet_type] if args.key?(:sheet_type)
@tab_color = args[:tab_color] if args.key?(:tab_color)
@tab_color_style = args[:tab_color_style] if args.key?(:tab_color_style)
@title = args[:title] if args.key?(:title)
end
end
# A slicer in a sheet.
class Slicer
include Google::Apis::Core::Hashable
# The position of an embedded object such as a chart.
# Corresponds to the JSON property `position`
# @return [Google::Apis::SheetsV4::EmbeddedObjectPosition]
attr_accessor :position
# The ID of the slicer.
# Corresponds to the JSON property `slicerId`
# @return [Fixnum]
attr_accessor :slicer_id
# The specifications of a slicer.
# Corresponds to the JSON property `spec`
# @return [Google::Apis::SheetsV4::SlicerSpec]
attr_accessor :spec
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@position = args[:position] if args.key?(:position)
@slicer_id = args[:slicer_id] if args.key?(:slicer_id)
@spec = args[:spec] if args.key?(:spec)
end
end
# The specifications of a slicer.
class SlicerSpec
include Google::Apis::Core::Hashable
# True if the filter should apply to pivot tables. If not set, default to `True`.
# Corresponds to the JSON property `applyToPivotTables`
# @return [Boolean]
attr_accessor :apply_to_pivot_tables
alias_method :apply_to_pivot_tables?, :apply_to_pivot_tables
# Represents a color in the RGBA color space. This representation is designed
# for simplicity of conversion to/from color representations in various
# languages over compactness; for example, the fields of this representation can
# be trivially provided to the constructor of "java.awt.Color" in Java; it can
# also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
# method in iOS; and, with just a little work, it can be easily formatted into a
# CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
# information about the absolute color space that should be used to interpret
# the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
# applications SHOULD assume the sRGB color space. Note: when color equality
# needs to be decided, implementations, unless documented otherwise, will treat
# two colors to be equal if all their red, green, blue and alpha values each
# differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
# public static java.awt.Color fromProto(Color protocolor) ` float alpha =
# protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
# java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
# ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
# float) color.getRed(); float green = (float) color.getGreen(); float blue = (
# float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
# = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
# .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
# ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
# denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
# Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
# protocolor red]; float green = [protocolor green]; float blue = [protocolor
# blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
# alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
# colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
# UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
# green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
# alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
# blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
# [result autorelease]; return result; ` // ... Example (JavaScript): // ...
# var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
# var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
# var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
# var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
# rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
# 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
# ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
# ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
# hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
# var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
# resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
# join(''); `; // ...
# Corresponds to the JSON property `backgroundColor`
# @return [Google::Apis::SheetsV4::Color]
attr_accessor :background_color
# A color value.
# Corresponds to the JSON property `backgroundColorStyle`
# @return [Google::Apis::SheetsV4::ColorStyle]
attr_accessor :background_color_style
# The column index in the data table on which the filter is applied to.
# Corresponds to the JSON property `columnIndex`
# @return [Fixnum]
attr_accessor :column_index
# A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
# the start index is inclusive and the end index is exclusive -- [start_index,
# end_index). Missing indexes indicate the range is unbounded on that side. For
# example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
# start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
# 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
# start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
# start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
# start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
# sheet_id:0` The start index must always be less than or equal to the end index.
# If the start index equals the end index, then the range is empty. Empty
# ranges are typically not meaningful and are usually rendered in the UI as `#
# REF!`.
# Corresponds to the JSON property `dataRange`
# @return [Google::Apis::SheetsV4::GridRange]
attr_accessor :data_range
# Criteria for showing/hiding rows in a filter or filter view.
# Corresponds to the JSON property `filterCriteria`
# @return [Google::Apis::SheetsV4::FilterCriteria]
attr_accessor :filter_criteria
# The horizontal alignment of title in the slicer. If unspecified, defaults to `
# LEFT`
# Corresponds to the JSON property `horizontalAlignment`
# @return [String]
attr_accessor :horizontal_alignment
# The format of a run of text in a cell. Absent values indicate that the field
# isn't specified.
# Corresponds to the JSON property `textFormat`
# @return [Google::Apis::SheetsV4::TextFormat]
attr_accessor :text_format
# The title of the slicer.
# Corresponds to the JSON property `title`
# @return [String]
attr_accessor :title
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@apply_to_pivot_tables = args[:apply_to_pivot_tables] if args.key?(:apply_to_pivot_tables)
@background_color = args[:background_color] if args.key?(:background_color)
@background_color_style = args[:background_color_style] if args.key?(:background_color_style)
@column_index = args[:column_index] if args.key?(:column_index)
@data_range = args[:data_range] if args.key?(:data_range)
@filter_criteria = args[:filter_criteria] if args.key?(:filter_criteria)
@horizontal_alignment = args[:horizontal_alignment] if args.key?(:horizontal_alignment)
@text_format = args[:text_format] if args.key?(:text_format)
@title = args[:title] if args.key?(:title)
end
end
# Sorts data in rows based on a sort order per column.
class SortRangeRequest
include Google::Apis::Core::Hashable
# A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
# the start index is inclusive and the end index is exclusive -- [start_index,
# end_index). Missing indexes indicate the range is unbounded on that side. For
# example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
# start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
# 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
# start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
# start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
# start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
# sheet_id:0` The start index must always be less than or equal to the end index.
# If the start index equals the end index, then the range is empty. Empty
# ranges are typically not meaningful and are usually rendered in the UI as `#
# REF!`.
# Corresponds to the JSON property `range`
# @return [Google::Apis::SheetsV4::GridRange]
attr_accessor :range
# The sort order per column. Later specifications are used when values are equal
# in the earlier specifications.
# Corresponds to the JSON property `sortSpecs`
# @return [Array<Google::Apis::SheetsV4::SortSpec>]
attr_accessor :sort_specs
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@range = args[:range] if args.key?(:range)
@sort_specs = args[:sort_specs] if args.key?(:sort_specs)
end
end
# A sort order associated with a specific column or row.
class SortSpec
include Google::Apis::Core::Hashable
# Represents a color in the RGBA color space. This representation is designed
# for simplicity of conversion to/from color representations in various
# languages over compactness; for example, the fields of this representation can
# be trivially provided to the constructor of "java.awt.Color" in Java; it can
# also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
# method in iOS; and, with just a little work, it can be easily formatted into a
# CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
# information about the absolute color space that should be used to interpret
# the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
# applications SHOULD assume the sRGB color space. Note: when color equality
# needs to be decided, implementations, unless documented otherwise, will treat
# two colors to be equal if all their red, green, blue and alpha values each
# differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
# public static java.awt.Color fromProto(Color protocolor) ` float alpha =
# protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
# java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
# ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
# float) color.getRed(); float green = (float) color.getGreen(); float blue = (
# float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
# = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
# .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
# ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
# denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
# Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
# protocolor red]; float green = [protocolor green]; float blue = [protocolor
# blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
# alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
# colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
# UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
# green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
# alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
# blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
# [result autorelease]; return result; ` // ... Example (JavaScript): // ...
# var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
# var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
# var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
# var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
# rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
# 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
# ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
# ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
# hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
# var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
# resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
# join(''); `; // ...
# Corresponds to the JSON property `backgroundColor`
# @return [Google::Apis::SheetsV4::Color]
attr_accessor :background_color
# A color value.
# Corresponds to the JSON property `backgroundColorStyle`
# @return [Google::Apis::SheetsV4::ColorStyle]
attr_accessor :background_color_style
# An unique identifier that references a data source column.
# Corresponds to the JSON property `dataSourceColumnReference`
# @return [Google::Apis::SheetsV4::DataSourceColumnReference]
attr_accessor :data_source_column_reference
# The dimension the sort should be applied to.
# Corresponds to the JSON property `dimensionIndex`
# @return [Fixnum]
attr_accessor :dimension_index
# Represents a color in the RGBA color space. This representation is designed
# for simplicity of conversion to/from color representations in various
# languages over compactness; for example, the fields of this representation can
# be trivially provided to the constructor of "java.awt.Color" in Java; it can
# also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
# method in iOS; and, with just a little work, it can be easily formatted into a
# CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
# information about the absolute color space that should be used to interpret
# the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
# applications SHOULD assume the sRGB color space. Note: when color equality
# needs to be decided, implementations, unless documented otherwise, will treat
# two colors to be equal if all their red, green, blue and alpha values each
# differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
# public static java.awt.Color fromProto(Color protocolor) ` float alpha =
# protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
# java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
# ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
# float) color.getRed(); float green = (float) color.getGreen(); float blue = (
# float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
# = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
# .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
# ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
# denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
# Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
# protocolor red]; float green = [protocolor green]; float blue = [protocolor
# blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
# alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
# colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
# UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
# green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
# alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
# blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
# [result autorelease]; return result; ` // ... Example (JavaScript): // ...
# var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
# var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
# var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
# var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
# rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
# 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
# ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
# ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
# hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
# var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
# resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
# join(''); `; // ...
# Corresponds to the JSON property `foregroundColor`
# @return [Google::Apis::SheetsV4::Color]
attr_accessor :foreground_color
# A color value.
# Corresponds to the JSON property `foregroundColorStyle`
# @return [Google::Apis::SheetsV4::ColorStyle]
attr_accessor :foreground_color_style
# The order data should be sorted.
# Corresponds to the JSON property `sortOrder`
# @return [String]
attr_accessor :sort_order
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@background_color = args[:background_color] if args.key?(:background_color)
@background_color_style = args[:background_color_style] if args.key?(:background_color_style)
@data_source_column_reference = args[:data_source_column_reference] if args.key?(:data_source_column_reference)
@dimension_index = args[:dimension_index] if args.key?(:dimension_index)
@foreground_color = args[:foreground_color] if args.key?(:foreground_color)
@foreground_color_style = args[:foreground_color_style] if args.key?(:foreground_color_style)
@sort_order = args[:sort_order] if args.key?(:sort_order)
end
end
# A combination of a source range and how to extend that source.
class SourceAndDestination
include Google::Apis::Core::Hashable
# The dimension that data should be filled into.
# Corresponds to the JSON property `dimension`
# @return [String]
attr_accessor :dimension
# The number of rows or columns that data should be filled into. Positive
# numbers expand beyond the last row or last column of the source. Negative
# numbers expand before the first row or first column of the source.
# Corresponds to the JSON property `fillLength`
# @return [Fixnum]
attr_accessor :fill_length
# A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
# the start index is inclusive and the end index is exclusive -- [start_index,
# end_index). Missing indexes indicate the range is unbounded on that side. For
# example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
# start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
# 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
# start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
# start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
# start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
# sheet_id:0` The start index must always be less than or equal to the end index.
# If the start index equals the end index, then the range is empty. Empty
# ranges are typically not meaningful and are usually rendered in the UI as `#
# REF!`.
# Corresponds to the JSON property `source`
# @return [Google::Apis::SheetsV4::GridRange]
attr_accessor :source
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@dimension = args[:dimension] if args.key?(:dimension)
@fill_length = args[:fill_length] if args.key?(:fill_length)
@source = args[:source] if args.key?(:source)
end
end
# Resource that represents a spreadsheet.
class Spreadsheet
include Google::Apis::Core::Hashable
# Output only. A list of data source refresh schedules.
# Corresponds to the JSON property `dataSourceSchedules`
# @return [Array<Google::Apis::SheetsV4::DataSourceRefreshSchedule>]
attr_accessor :data_source_schedules
# A list of external data sources connected with the spreadsheet.
# Corresponds to the JSON property `dataSources`
# @return [Array<Google::Apis::SheetsV4::DataSource>]
attr_accessor :data_sources
# The developer metadata associated with a spreadsheet.
# Corresponds to the JSON property `developerMetadata`
# @return [Array<Google::Apis::SheetsV4::DeveloperMetadata>]
attr_accessor :developer_metadata
# The named ranges defined in a spreadsheet.
# Corresponds to the JSON property `namedRanges`
# @return [Array<Google::Apis::SheetsV4::NamedRange>]
attr_accessor :named_ranges
# Properties of a spreadsheet.
# Corresponds to the JSON property `properties`
# @return [Google::Apis::SheetsV4::SpreadsheetProperties]
attr_accessor :properties
# The sheets that are part of a spreadsheet.
# Corresponds to the JSON property `sheets`
# @return [Array<Google::Apis::SheetsV4::Sheet>]
attr_accessor :sheets
# The ID of the spreadsheet. This field is read-only.
# Corresponds to the JSON property `spreadsheetId`
# @return [String]
attr_accessor :spreadsheet_id
# The url of the spreadsheet. This field is read-only.
# Corresponds to the JSON property `spreadsheetUrl`
# @return [String]
attr_accessor :spreadsheet_url
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data_source_schedules = args[:data_source_schedules] if args.key?(:data_source_schedules)
@data_sources = args[:data_sources] if args.key?(:data_sources)
@developer_metadata = args[:developer_metadata] if args.key?(:developer_metadata)
@named_ranges = args[:named_ranges] if args.key?(:named_ranges)
@properties = args[:properties] if args.key?(:properties)
@sheets = args[:sheets] if args.key?(:sheets)
@spreadsheet_id = args[:spreadsheet_id] if args.key?(:spreadsheet_id)
@spreadsheet_url = args[:spreadsheet_url] if args.key?(:spreadsheet_url)
end
end
# Properties of a spreadsheet.
class SpreadsheetProperties
include Google::Apis::Core::Hashable
# The amount of time to wait before volatile functions are recalculated.
# Corresponds to the JSON property `autoRecalc`
# @return [String]
attr_accessor :auto_recalc
# The format of a cell.
# Corresponds to the JSON property `defaultFormat`
# @return [Google::Apis::SheetsV4::CellFormat]
attr_accessor :default_format
# Settings to control how circular dependencies are resolved with iterative
# calculation.
# Corresponds to the JSON property `iterativeCalculationSettings`
# @return [Google::Apis::SheetsV4::IterativeCalculationSettings]
attr_accessor :iterative_calculation_settings
# The locale of the spreadsheet in one of the following formats: * an ISO 639-1
# language code such as `en` * an ISO 639-2 language code such as `fil`, if no
# 639-1 code exists * a combination of the ISO language code and country code,
# such as `en_US` Note: when updating this field, not all locales/languages are
# supported.
# Corresponds to the JSON property `locale`
# @return [String]
attr_accessor :locale
# Represents spreadsheet theme
# Corresponds to the JSON property `spreadsheetTheme`
# @return [Google::Apis::SheetsV4::SpreadsheetTheme]
attr_accessor :spreadsheet_theme
# The time zone of the spreadsheet, in CLDR format such as `America/New_York`.
# If the time zone isn't recognized, this may be a custom time zone such as `GMT-
# 07:00`.
# Corresponds to the JSON property `timeZone`
# @return [String]
attr_accessor :time_zone
# The title of the spreadsheet.
# Corresponds to the JSON property `title`
# @return [String]
attr_accessor :title
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@auto_recalc = args[:auto_recalc] if args.key?(:auto_recalc)
@default_format = args[:default_format] if args.key?(:default_format)
@iterative_calculation_settings = args[:iterative_calculation_settings] if args.key?(:iterative_calculation_settings)
@locale = args[:locale] if args.key?(:locale)
@spreadsheet_theme = args[:spreadsheet_theme] if args.key?(:spreadsheet_theme)
@time_zone = args[:time_zone] if args.key?(:time_zone)
@title = args[:title] if args.key?(:title)
end
end
# Represents spreadsheet theme
class SpreadsheetTheme
include Google::Apis::Core::Hashable
# Name of the primary font family.
# Corresponds to the JSON property `primaryFontFamily`
# @return [String]
attr_accessor :primary_font_family
# The spreadsheet theme color pairs. To update you must provide all theme color
# pairs.
# Corresponds to the JSON property `themeColors`
# @return [Array<Google::Apis::SheetsV4::ThemeColorPair>]
attr_accessor :theme_colors
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@primary_font_family = args[:primary_font_family] if args.key?(:primary_font_family)
@theme_colors = args[:theme_colors] if args.key?(:theme_colors)
end
end
# The format of a run of text in a cell. Absent values indicate that the field
# isn't specified.
class TextFormat
include Google::Apis::Core::Hashable
# True if the text is bold.
# Corresponds to the JSON property `bold`
# @return [Boolean]
attr_accessor :bold
alias_method :bold?, :bold
# The font family.
# Corresponds to the JSON property `fontFamily`
# @return [String]
attr_accessor :font_family
# The size of the font.
# Corresponds to the JSON property `fontSize`
# @return [Fixnum]
attr_accessor :font_size
# Represents a color in the RGBA color space. This representation is designed
# for simplicity of conversion to/from color representations in various
# languages over compactness; for example, the fields of this representation can
# be trivially provided to the constructor of "java.awt.Color" in Java; it can
# also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
# method in iOS; and, with just a little work, it can be easily formatted into a
# CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
# information about the absolute color space that should be used to interpret
# the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
# applications SHOULD assume the sRGB color space. Note: when color equality
# needs to be decided, implementations, unless documented otherwise, will treat
# two colors to be equal if all their red, green, blue and alpha values each
# differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
# public static java.awt.Color fromProto(Color protocolor) ` float alpha =
# protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
# java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
# ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
# float) color.getRed(); float green = (float) color.getGreen(); float blue = (
# float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
# = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
# .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
# ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
# denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
# Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
# protocolor red]; float green = [protocolor green]; float blue = [protocolor
# blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
# alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
# colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
# UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
# green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
# alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
# blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
# [result autorelease]; return result; ` // ... Example (JavaScript): // ...
# var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
# var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
# var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
# var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
# rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
# 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
# ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
# ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
# hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
# var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
# resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
# join(''); `; // ...
# Corresponds to the JSON property `foregroundColor`
# @return [Google::Apis::SheetsV4::Color]
attr_accessor :foreground_color
# A color value.
# Corresponds to the JSON property `foregroundColorStyle`
# @return [Google::Apis::SheetsV4::ColorStyle]
attr_accessor :foreground_color_style
# True if the text is italicized.
# Corresponds to the JSON property `italic`
# @return [Boolean]
attr_accessor :italic
alias_method :italic?, :italic
# True if the text has a strikethrough.
# Corresponds to the JSON property `strikethrough`
# @return [Boolean]
attr_accessor :strikethrough
alias_method :strikethrough?, :strikethrough
# True if the text is underlined.
# Corresponds to the JSON property `underline`
# @return [Boolean]
attr_accessor :underline
alias_method :underline?, :underline
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@bold = args[:bold] if args.key?(:bold)
@font_family = args[:font_family] if args.key?(:font_family)
@font_size = args[:font_size] if args.key?(:font_size)
@foreground_color = args[:foreground_color] if args.key?(:foreground_color)
@foreground_color_style = args[:foreground_color_style] if args.key?(:foreground_color_style)
@italic = args[:italic] if args.key?(:italic)
@strikethrough = args[:strikethrough] if args.key?(:strikethrough)
@underline = args[:underline] if args.key?(:underline)
end
end
# A run of a text format. The format of this run continues until the start index
# of the next run. When updating, all fields must be set.
class TextFormatRun
include Google::Apis::Core::Hashable
# The format of a run of text in a cell. Absent values indicate that the field
# isn't specified.
# Corresponds to the JSON property `format`
# @return [Google::Apis::SheetsV4::TextFormat]
attr_accessor :format
# The character index where this run starts.
# Corresponds to the JSON property `startIndex`
# @return [Fixnum]
attr_accessor :start_index
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@format = args[:format] if args.key?(:format)
@start_index = args[:start_index] if args.key?(:start_index)
end
end
# Position settings for text.
class TextPosition
include Google::Apis::Core::Hashable
# Horizontal alignment setting for the piece of text.
# Corresponds to the JSON property `horizontalAlignment`
# @return [String]
attr_accessor :horizontal_alignment
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@horizontal_alignment = args[:horizontal_alignment] if args.key?(:horizontal_alignment)
end
end
# The rotation applied to text in a cell.
class TextRotation
include Google::Apis::Core::Hashable
# The angle between the standard orientation and the desired orientation.
# Measured in degrees. Valid values are between -90 and 90. Positive angles are
# angled upwards, negative are angled downwards. Note: For LTR text direction
# positive angles are in the counterclockwise direction, whereas for RTL they
# are in the clockwise direction
# Corresponds to the JSON property `angle`
# @return [Fixnum]
attr_accessor :angle
# If true, text reads top to bottom, but the orientation of individual
# characters is unchanged. For example: | V | | e | | r | | t | | i | | c | | a |
# | l |
# Corresponds to the JSON property `vertical`
# @return [Boolean]
attr_accessor :vertical
alias_method :vertical?, :vertical
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@angle = args[:angle] if args.key?(:angle)
@vertical = args[:vertical] if args.key?(:vertical)
end
end
# Splits a column of text into multiple columns, based on a delimiter in each
# cell.
class TextToColumnsRequest
include Google::Apis::Core::Hashable
# The delimiter to use. Used only if delimiterType is CUSTOM.
# Corresponds to the JSON property `delimiter`
# @return [String]
attr_accessor :delimiter
# The delimiter type to use.
# Corresponds to the JSON property `delimiterType`
# @return [String]
attr_accessor :delimiter_type
# A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
# the start index is inclusive and the end index is exclusive -- [start_index,
# end_index). Missing indexes indicate the range is unbounded on that side. For
# example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
# start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
# 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
# start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
# start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
# start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
# sheet_id:0` The start index must always be less than or equal to the end index.
# If the start index equals the end index, then the range is empty. Empty
# ranges are typically not meaningful and are usually rendered in the UI as `#
# REF!`.
# Corresponds to the JSON property `source`
# @return [Google::Apis::SheetsV4::GridRange]
attr_accessor :source
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@delimiter = args[:delimiter] if args.key?(:delimiter)
@delimiter_type = args[:delimiter_type] if args.key?(:delimiter_type)
@source = args[:source] if args.key?(:source)
end
end
# A pair mapping a spreadsheet theme color type to the concrete color it
# represents.
class ThemeColorPair
include Google::Apis::Core::Hashable
# A color value.
# Corresponds to the JSON property `color`
# @return [Google::Apis::SheetsV4::ColorStyle]
attr_accessor :color
# The type of the spreadsheet theme color.
# Corresponds to the JSON property `colorType`
# @return [String]
attr_accessor :color_type
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@color = args[:color] if args.key?(:color)
@color_type = args[:color_type] if args.key?(:color_type)
end
end
# Represents a time of day. The date and time zone are either not significant or
# are specified elsewhere. An API may choose to allow leap seconds. Related
# types are google.type.Date and `google.protobuf.Timestamp`.
class TimeOfDay
include Google::Apis::Core::Hashable
# Hours of day in 24 hour format. Should be from 0 to 23. An API may choose to
# allow the value "24:00:00" for scenarios like business closing time.
# Corresponds to the JSON property `hours`
# @return [Fixnum]
attr_accessor :hours
# Minutes of hour of day. Must be from 0 to 59.
# Corresponds to the JSON property `minutes`
# @return [Fixnum]
attr_accessor :minutes
# Fractions of seconds in nanoseconds. Must be from 0 to 999,999,999.
# Corresponds to the JSON property `nanos`
# @return [Fixnum]
attr_accessor :nanos
# Seconds of minutes of the time. Must normally be from 0 to 59. An API may
# allow the value 60 if it allows leap-seconds.
# Corresponds to the JSON property `seconds`
# @return [Fixnum]
attr_accessor :seconds
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@hours = args[:hours] if args.key?(:hours)
@minutes = args[:minutes] if args.key?(:minutes)
@nanos = args[:nanos] if args.key?(:nanos)
@seconds = args[:seconds] if args.key?(:seconds)
end
end
# A color scale for a treemap chart.
class TreemapChartColorScale
include Google::Apis::Core::Hashable
# Represents a color in the RGBA color space. This representation is designed
# for simplicity of conversion to/from color representations in various
# languages over compactness; for example, the fields of this representation can
# be trivially provided to the constructor of "java.awt.Color" in Java; it can
# also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
# method in iOS; and, with just a little work, it can be easily formatted into a
# CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
# information about the absolute color space that should be used to interpret
# the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
# applications SHOULD assume the sRGB color space. Note: when color equality
# needs to be decided, implementations, unless documented otherwise, will treat
# two colors to be equal if all their red, green, blue and alpha values each
# differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
# public static java.awt.Color fromProto(Color protocolor) ` float alpha =
# protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
# java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
# ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
# float) color.getRed(); float green = (float) color.getGreen(); float blue = (
# float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
# = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
# .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
# ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
# denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
# Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
# protocolor red]; float green = [protocolor green]; float blue = [protocolor
# blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
# alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
# colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
# UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
# green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
# alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
# blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
# [result autorelease]; return result; ` // ... Example (JavaScript): // ...
# var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
# var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
# var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
# var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
# rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
# 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
# ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
# ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
# hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
# var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
# resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
# join(''); `; // ...
# Corresponds to the JSON property `maxValueColor`
# @return [Google::Apis::SheetsV4::Color]
attr_accessor :max_value_color
# A color value.
# Corresponds to the JSON property `maxValueColorStyle`
# @return [Google::Apis::SheetsV4::ColorStyle]
attr_accessor :max_value_color_style
# Represents a color in the RGBA color space. This representation is designed
# for simplicity of conversion to/from color representations in various
# languages over compactness; for example, the fields of this representation can
# be trivially provided to the constructor of "java.awt.Color" in Java; it can
# also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
# method in iOS; and, with just a little work, it can be easily formatted into a
# CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
# information about the absolute color space that should be used to interpret
# the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
# applications SHOULD assume the sRGB color space. Note: when color equality
# needs to be decided, implementations, unless documented otherwise, will treat
# two colors to be equal if all their red, green, blue and alpha values each
# differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
# public static java.awt.Color fromProto(Color protocolor) ` float alpha =
# protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
# java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
# ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
# float) color.getRed(); float green = (float) color.getGreen(); float blue = (
# float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
# = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
# .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
# ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
# denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
# Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
# protocolor red]; float green = [protocolor green]; float blue = [protocolor
# blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
# alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
# colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
# UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
# green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
# alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
# blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
# [result autorelease]; return result; ` // ... Example (JavaScript): // ...
# var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
# var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
# var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
# var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
# rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
# 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
# ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
# ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
# hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
# var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
# resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
# join(''); `; // ...
# Corresponds to the JSON property `midValueColor`
# @return [Google::Apis::SheetsV4::Color]
attr_accessor :mid_value_color
# A color value.
# Corresponds to the JSON property `midValueColorStyle`
# @return [Google::Apis::SheetsV4::ColorStyle]
attr_accessor :mid_value_color_style
# Represents a color in the RGBA color space. This representation is designed
# for simplicity of conversion to/from color representations in various
# languages over compactness; for example, the fields of this representation can
# be trivially provided to the constructor of "java.awt.Color" in Java; it can
# also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
# method in iOS; and, with just a little work, it can be easily formatted into a
# CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
# information about the absolute color space that should be used to interpret
# the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
# applications SHOULD assume the sRGB color space. Note: when color equality
# needs to be decided, implementations, unless documented otherwise, will treat
# two colors to be equal if all their red, green, blue and alpha values each
# differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
# public static java.awt.Color fromProto(Color protocolor) ` float alpha =
# protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
# java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
# ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
# float) color.getRed(); float green = (float) color.getGreen(); float blue = (
# float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
# = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
# .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
# ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
# denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
# Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
# protocolor red]; float green = [protocolor green]; float blue = [protocolor
# blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
# alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
# colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
# UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
# green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
# alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
# blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
# [result autorelease]; return result; ` // ... Example (JavaScript): // ...
# var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
# var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
# var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
# var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
# rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
# 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
# ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
# ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
# hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
# var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
# resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
# join(''); `; // ...
# Corresponds to the JSON property `minValueColor`
# @return [Google::Apis::SheetsV4::Color]
attr_accessor :min_value_color
# A color value.
# Corresponds to the JSON property `minValueColorStyle`
# @return [Google::Apis::SheetsV4::ColorStyle]
attr_accessor :min_value_color_style
# Represents a color in the RGBA color space. This representation is designed
# for simplicity of conversion to/from color representations in various
# languages over compactness; for example, the fields of this representation can
# be trivially provided to the constructor of "java.awt.Color" in Java; it can
# also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
# method in iOS; and, with just a little work, it can be easily formatted into a
# CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
# information about the absolute color space that should be used to interpret
# the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
# applications SHOULD assume the sRGB color space. Note: when color equality
# needs to be decided, implementations, unless documented otherwise, will treat
# two colors to be equal if all their red, green, blue and alpha values each
# differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
# public static java.awt.Color fromProto(Color protocolor) ` float alpha =
# protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
# java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
# ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
# float) color.getRed(); float green = (float) color.getGreen(); float blue = (
# float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
# = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
# .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
# ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
# denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
# Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
# protocolor red]; float green = [protocolor green]; float blue = [protocolor
# blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
# alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
# colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
# UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
# green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
# alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
# blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
# [result autorelease]; return result; ` // ... Example (JavaScript): // ...
# var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
# var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
# var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
# var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
# rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
# 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
# ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
# ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
# hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
# var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
# resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
# join(''); `; // ...
# Corresponds to the JSON property `noDataColor`
# @return [Google::Apis::SheetsV4::Color]
attr_accessor :no_data_color
# A color value.
# Corresponds to the JSON property `noDataColorStyle`
# @return [Google::Apis::SheetsV4::ColorStyle]
attr_accessor :no_data_color_style
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@max_value_color = args[:max_value_color] if args.key?(:max_value_color)
@max_value_color_style = args[:max_value_color_style] if args.key?(:max_value_color_style)
@mid_value_color = args[:mid_value_color] if args.key?(:mid_value_color)
@mid_value_color_style = args[:mid_value_color_style] if args.key?(:mid_value_color_style)
@min_value_color = args[:min_value_color] if args.key?(:min_value_color)
@min_value_color_style = args[:min_value_color_style] if args.key?(:min_value_color_style)
@no_data_color = args[:no_data_color] if args.key?(:no_data_color)
@no_data_color_style = args[:no_data_color_style] if args.key?(:no_data_color_style)
end
end
# A Treemap chart.
class TreemapChartSpec
include Google::Apis::Core::Hashable
# The data included in a domain or series.
# Corresponds to the JSON property `colorData`
# @return [Google::Apis::SheetsV4::ChartData]
attr_accessor :color_data
# A color scale for a treemap chart.
# Corresponds to the JSON property `colorScale`
# @return [Google::Apis::SheetsV4::TreemapChartColorScale]
attr_accessor :color_scale
# Represents a color in the RGBA color space. This representation is designed
# for simplicity of conversion to/from color representations in various
# languages over compactness; for example, the fields of this representation can
# be trivially provided to the constructor of "java.awt.Color" in Java; it can
# also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
# method in iOS; and, with just a little work, it can be easily formatted into a
# CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
# information about the absolute color space that should be used to interpret
# the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
# applications SHOULD assume the sRGB color space. Note: when color equality
# needs to be decided, implementations, unless documented otherwise, will treat
# two colors to be equal if all their red, green, blue and alpha values each
# differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
# public static java.awt.Color fromProto(Color protocolor) ` float alpha =
# protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
# java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
# ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
# float) color.getRed(); float green = (float) color.getGreen(); float blue = (
# float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
# = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
# .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
# ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
# denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
# Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
# protocolor red]; float green = [protocolor green]; float blue = [protocolor
# blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
# alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
# colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
# UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
# green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
# alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
# blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
# [result autorelease]; return result; ` // ... Example (JavaScript): // ...
# var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
# var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
# var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
# var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
# rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
# 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
# ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
# ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
# hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
# var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
# resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
# join(''); `; // ...
# Corresponds to the JSON property `headerColor`
# @return [Google::Apis::SheetsV4::Color]
attr_accessor :header_color
# A color value.
# Corresponds to the JSON property `headerColorStyle`
# @return [Google::Apis::SheetsV4::ColorStyle]
attr_accessor :header_color_style
# True to hide tooltips.
# Corresponds to the JSON property `hideTooltips`
# @return [Boolean]
attr_accessor :hide_tooltips
alias_method :hide_tooltips?, :hide_tooltips
# The number of additional data levels beyond the labeled levels to be shown on
# the treemap chart. These levels are not interactive and are shown without
# their labels. Defaults to 0 if not specified.
# Corresponds to the JSON property `hintedLevels`
# @return [Fixnum]
attr_accessor :hinted_levels
# The data included in a domain or series.
# Corresponds to the JSON property `labels`
# @return [Google::Apis::SheetsV4::ChartData]
attr_accessor :labels
# The number of data levels to show on the treemap chart. These levels are
# interactive and are shown with their labels. Defaults to 2 if not specified.
# Corresponds to the JSON property `levels`
# @return [Fixnum]
attr_accessor :levels
# The maximum possible data value. Cells with values greater than this will have
# the same color as cells with this value. If not specified, defaults to the
# actual maximum value from color_data, or the maximum value from size_data if
# color_data is not specified.
# Corresponds to the JSON property `maxValue`
# @return [Float]
attr_accessor :max_value
# The minimum possible data value. Cells with values less than this will have
# the same color as cells with this value. If not specified, defaults to the
# actual minimum value from color_data, or the minimum value from size_data if
# color_data is not specified.
# Corresponds to the JSON property `minValue`
# @return [Float]
attr_accessor :min_value
# The data included in a domain or series.
# Corresponds to the JSON property `parentLabels`
# @return [Google::Apis::SheetsV4::ChartData]
attr_accessor :parent_labels
# The data included in a domain or series.
# Corresponds to the JSON property `sizeData`
# @return [Google::Apis::SheetsV4::ChartData]
attr_accessor :size_data
# The format of a run of text in a cell. Absent values indicate that the field
# isn't specified.
# Corresponds to the JSON property `textFormat`
# @return [Google::Apis::SheetsV4::TextFormat]
attr_accessor :text_format
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@color_data = args[:color_data] if args.key?(:color_data)
@color_scale = args[:color_scale] if args.key?(:color_scale)
@header_color = args[:header_color] if args.key?(:header_color)
@header_color_style = args[:header_color_style] if args.key?(:header_color_style)
@hide_tooltips = args[:hide_tooltips] if args.key?(:hide_tooltips)
@hinted_levels = args[:hinted_levels] if args.key?(:hinted_levels)
@labels = args[:labels] if args.key?(:labels)
@levels = args[:levels] if args.key?(:levels)
@max_value = args[:max_value] if args.key?(:max_value)
@min_value = args[:min_value] if args.key?(:min_value)
@parent_labels = args[:parent_labels] if args.key?(:parent_labels)
@size_data = args[:size_data] if args.key?(:size_data)
@text_format = args[:text_format] if args.key?(:text_format)
end
end
# Trims the whitespace (such as spaces, tabs, or new lines) in every cell in the
# specified range. This request removes all whitespace from the start and end of
# each cell's text, and reduces any subsequence of remaining whitespace
# characters to a single space. If the resulting trimmed text starts with a '+'
# or '=' character, the text remains as a string value and isn't interpreted as
# a formula.
class TrimWhitespaceRequest
include Google::Apis::Core::Hashable
# A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
# the start index is inclusive and the end index is exclusive -- [start_index,
# end_index). Missing indexes indicate the range is unbounded on that side. For
# example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
# start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
# 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
# start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
# start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
# start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
# sheet_id:0` The start index must always be less than or equal to the end index.
# If the start index equals the end index, then the range is empty. Empty
# ranges are typically not meaningful and are usually rendered in the UI as `#
# REF!`.
# Corresponds to the JSON property `range`
# @return [Google::Apis::SheetsV4::GridRange]
attr_accessor :range
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@range = args[:range] if args.key?(:range)
end
end
# The result of trimming whitespace in cells.
class TrimWhitespaceResponse
include Google::Apis::Core::Hashable
# The number of cells that were trimmed of whitespace.
# Corresponds to the JSON property `cellsChangedCount`
# @return [Fixnum]
attr_accessor :cells_changed_count
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@cells_changed_count = args[:cells_changed_count] if args.key?(:cells_changed_count)
end
end
# Unmerges cells in the given range.
class UnmergeCellsRequest
include Google::Apis::Core::Hashable
# A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
# the start index is inclusive and the end index is exclusive -- [start_index,
# end_index). Missing indexes indicate the range is unbounded on that side. For
# example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
# start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
# 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
# start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
# start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
# start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
# sheet_id:0` The start index must always be less than or equal to the end index.
# If the start index equals the end index, then the range is empty. Empty
# ranges are typically not meaningful and are usually rendered in the UI as `#
# REF!`.
# Corresponds to the JSON property `range`
# @return [Google::Apis::SheetsV4::GridRange]
attr_accessor :range
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@range = args[:range] if args.key?(:range)
end
end
# Updates properties of the supplied banded range.
class UpdateBandingRequest
include Google::Apis::Core::Hashable
# A banded (alternating colors) range in a sheet.
# Corresponds to the JSON property `bandedRange`
# @return [Google::Apis::SheetsV4::BandedRange]
attr_accessor :banded_range
# The fields that should be updated. At least one field must be specified. The
# root `bandedRange` is implied and should not be specified. A single `"*"` can
# be used as short-hand for listing every field.
# Corresponds to the JSON property `fields`
# @return [String]
attr_accessor :fields
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@banded_range = args[:banded_range] if args.key?(:banded_range)
@fields = args[:fields] if args.key?(:fields)
end
end
# Updates the borders of a range. If a field is not set in the request, that
# means the border remains as-is. For example, with two subsequent
# UpdateBordersRequest: 1. range: A1:A5 `` top: RED, bottom: WHITE `` 2. range:
# A1:A5 `` left: BLUE `` That would result in A1:A5 having a borders of `` top:
# RED, bottom: WHITE, left: BLUE ``. If you want to clear a border, explicitly
# set the style to NONE.
class UpdateBordersRequest
include Google::Apis::Core::Hashable
# A border along a cell.
# Corresponds to the JSON property `bottom`
# @return [Google::Apis::SheetsV4::Border]
attr_accessor :bottom
# A border along a cell.
# Corresponds to the JSON property `innerHorizontal`
# @return [Google::Apis::SheetsV4::Border]
attr_accessor :inner_horizontal
# A border along a cell.
# Corresponds to the JSON property `innerVertical`
# @return [Google::Apis::SheetsV4::Border]
attr_accessor :inner_vertical
# A border along a cell.
# Corresponds to the JSON property `left`
# @return [Google::Apis::SheetsV4::Border]
attr_accessor :left
# A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
# the start index is inclusive and the end index is exclusive -- [start_index,
# end_index). Missing indexes indicate the range is unbounded on that side. For
# example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
# start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
# 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
# start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
# start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
# start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
# sheet_id:0` The start index must always be less than or equal to the end index.
# If the start index equals the end index, then the range is empty. Empty
# ranges are typically not meaningful and are usually rendered in the UI as `#
# REF!`.
# Corresponds to the JSON property `range`
# @return [Google::Apis::SheetsV4::GridRange]
attr_accessor :range
# A border along a cell.
# Corresponds to the JSON property `right`
# @return [Google::Apis::SheetsV4::Border]
attr_accessor :right
# A border along a cell.
# Corresponds to the JSON property `top`
# @return [Google::Apis::SheetsV4::Border]
attr_accessor :top
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@bottom = args[:bottom] if args.key?(:bottom)
@inner_horizontal = args[:inner_horizontal] if args.key?(:inner_horizontal)
@inner_vertical = args[:inner_vertical] if args.key?(:inner_vertical)
@left = args[:left] if args.key?(:left)
@range = args[:range] if args.key?(:range)
@right = args[:right] if args.key?(:right)
@top = args[:top] if args.key?(:top)
end
end
# Updates all cells in a range with new data.
class UpdateCellsRequest
include Google::Apis::Core::Hashable
# The fields of CellData that should be updated. At least one field must be
# specified. The root is the CellData; 'row.values.' should not be specified. A
# single `"*"` can be used as short-hand for listing every field.
# Corresponds to the JSON property `fields`
# @return [String]
attr_accessor :fields
# A range on a sheet. All indexes are zero-based. Indexes are half open, i.e.
# the start index is inclusive and the end index is exclusive -- [start_index,
# end_index). Missing indexes indicate the range is unbounded on that side. For
# example, if `"Sheet1"` is sheet ID 0, then: `Sheet1!A1:A1 == sheet_id: 0,
# start_row_index: 0, end_row_index: 1, start_column_index: 0, end_column_index:
# 1` `Sheet1!A3:B4 == sheet_id: 0, start_row_index: 2, end_row_index: 4,
# start_column_index: 0, end_column_index: 2` `Sheet1!A:B == sheet_id: 0,
# start_column_index: 0, end_column_index: 2` `Sheet1!A5:B == sheet_id: 0,
# start_row_index: 4, start_column_index: 0, end_column_index: 2` `Sheet1 ==
# sheet_id:0` The start index must always be less than or equal to the end index.
# If the start index equals the end index, then the range is empty. Empty
# ranges are typically not meaningful and are usually rendered in the UI as `#
# REF!`.
# Corresponds to the JSON property `range`
# @return [Google::Apis::SheetsV4::GridRange]
attr_accessor :range
# The data to write.
# Corresponds to the JSON property `rows`
# @return [Array<Google::Apis::SheetsV4::RowData>]
attr_accessor :rows
# A coordinate in a sheet. All indexes are zero-based.
# Corresponds to the JSON property `start`
# @return [Google::Apis::SheetsV4::GridCoordinate]
attr_accessor :start
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@fields = args[:fields] if args.key?(:fields)
@range = args[:range] if args.key?(:range)
@rows = args[:rows] if args.key?(:rows)
@start = args[:start] if args.key?(:start)
end
end
# Updates a chart's specifications. (This does not move or resize a chart. To
# move or resize a chart, use UpdateEmbeddedObjectPositionRequest.)
class UpdateChartSpecRequest
include Google::Apis::Core::Hashable
# The ID of the chart to update.
# Corresponds to the JSON property `chartId`
# @return [Fixnum]
attr_accessor :chart_id
# The specifications of a chart.
# Corresponds to the JSON property `spec`
# @return [Google::Apis::SheetsV4::ChartSpec]
attr_accessor :spec
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@chart_id = args[:chart_id] if args.key?(:chart_id)
@spec = args[:spec] if args.key?(:spec)
end
end
# Updates a conditional format rule at the given index, or moves a conditional
# format rule to another index.
class UpdateConditionalFormatRuleRequest
include Google::Apis::Core::Hashable
# The zero-based index of the rule that should be replaced or moved.
# Corresponds to the JSON property `index`
# @return [Fixnum]
attr_accessor :index
# The zero-based new index the rule should end up at.
# Corresponds to the JSON property `newIndex`
# @return [Fixnum]
attr_accessor :new_index
# A rule describing a conditional format.
# Corresponds to the JSON property `rule`
# @return [Google::Apis::SheetsV4::ConditionalFormatRule]
attr_accessor :rule
# The sheet of the rule to move. Required if new_index is set, unused otherwise.
# Corresponds to the JSON property `sheetId`
# @return [Fixnum]
attr_accessor :sheet_id
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@index = args[:index] if args.key?(:index)
@new_index = args[:new_index] if args.key?(:new_index)
@rule = args[:rule] if args.key?(:rule)
@sheet_id = args[:sheet_id] if args.key?(:sheet_id)
end
end
# The result of updating a conditional format rule.
class UpdateConditionalFormatRuleResponse
include Google::Apis::Core::Hashable
# The index of the new rule.
# Corresponds to the JSON property `newIndex`
# @return [Fixnum]
attr_accessor :new_index
# A rule describing a conditional format.
# Corresponds to the JSON property `newRule`
# @return [Google::Apis::SheetsV4::ConditionalFormatRule]
attr_accessor :new_rule
# The old index of the rule. Not set if a rule was replaced (because it is the
# same as new_index).
# Corresponds to the JSON property `oldIndex`
# @return [Fixnum]
attr_accessor :old_index
# A rule describing a conditional format.
# Corresponds to the JSON property `oldRule`
# @return [Google::Apis::SheetsV4::ConditionalFormatRule]
attr_accessor :old_rule
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@new_index = args[:new_index] if args.key?(:new_index)
@new_rule = args[:new_rule] if args.key?(:new_rule)
@old_index = args[:old_index] if args.key?(:old_index)
@old_rule = args[:old_rule] if args.key?(:old_rule)
end
end
# Updates a data source. After the data source is updated successfully, an
# execution is triggered to refresh the associated DATA_SOURCE sheet to read
# data from the updated data source. The request requires an additional `
# bigquery.readonly` OAuth scope.
class UpdateDataSourceRequest
include Google::Apis::Core::Hashable
# Information about an external data source in the spreadsheet.
# Corresponds to the JSON property `dataSource`
# @return [Google::Apis::SheetsV4::DataSource]
attr_accessor :data_source
# The fields that should be updated. At least one field must be specified. The
# root `dataSource` is implied and should not be specified. A single `"*"` can
# be used as short-hand for listing every field.
# Corresponds to the JSON property `fields`
# @return [String]
attr_accessor :fields
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data_source = args[:data_source] if args.key?(:data_source)
@fields = args[:fields] if args.key?(:fields)
end
end
# The response from updating data source.
class UpdateDataSourceResponse
include Google::Apis::Core::Hashable
# The data execution status. A data execution is created to sync a data source
# object with the latest data from a DataSource. It is usually scheduled to run
# at background, you can check its state to tell if an execution completes There
# are several scenarios where a data execution is triggered to run: * Adding a
# data source creates an associated data source sheet as well as a data
# execution to sync the data from the data source to the sheet. * Updating a
# data source creates a data execution to refresh the associated data source
# sheet similarly. * You can send refresh request to explicitly refresh one or
# multiple data source objects.
# Corresponds to the JSON property `dataExecutionStatus`
# @return [Google::Apis::SheetsV4::DataExecutionStatus]
attr_accessor :data_execution_status
# Information about an external data source in the spreadsheet.
# Corresponds to the JSON property `dataSource`
# @return [Google::Apis::SheetsV4::DataSource]
attr_accessor :data_source
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data_execution_status = args[:data_execution_status] if args.key?(:data_execution_status)
@data_source = args[:data_source] if args.key?(:data_source)
end
end
# A request to update properties of developer metadata. Updates the properties
# of the developer metadata selected by the filters to the values provided in
# the DeveloperMetadata resource. Callers must specify the properties they wish
# to update in the fields parameter, as well as specify at least one DataFilter
# matching the metadata they wish to update.
class UpdateDeveloperMetadataRequest
include Google::Apis::Core::Hashable
# The filters matching the developer metadata entries to update.
# Corresponds to the JSON property `dataFilters`
# @return [Array<Google::Apis::SheetsV4::DataFilter>]
attr_accessor :data_filters
# Developer metadata associated with a location or object in a spreadsheet.
# Developer metadata may be used to associate arbitrary data with various parts
# of a spreadsheet and will remain associated at those locations as they move
# around and the spreadsheet is edited. For example, if developer metadata is
# associated with row 5 and another row is then subsequently inserted above row
# 5, that original metadata will still be associated with the row it was first
# associated with (what is now row 6). If the associated object is deleted its
# metadata is deleted too.
# Corresponds to the JSON property `developerMetadata`
# @return [Google::Apis::SheetsV4::DeveloperMetadata]
attr_accessor :developer_metadata
# The fields that should be updated. At least one field must be specified. The
# root `developerMetadata` is implied and should not be specified. A single `"*"`
# can be used as short-hand for listing every field.
# Corresponds to the JSON property `fields`
# @return [String]
attr_accessor :fields
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data_filters = args[:data_filters] if args.key?(:data_filters)
@developer_metadata = args[:developer_metadata] if args.key?(:developer_metadata)
@fields = args[:fields] if args.key?(:fields)
end
end
# The response from updating developer metadata.
class UpdateDeveloperMetadataResponse
include Google::Apis::Core::Hashable
# The updated developer metadata.
# Corresponds to the JSON property `developerMetadata`
# @return [Array<Google::Apis::SheetsV4::DeveloperMetadata>]
attr_accessor :developer_metadata
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@developer_metadata = args[:developer_metadata] if args.key?(:developer_metadata)
end
end
# Updates the state of the specified group.
class UpdateDimensionGroupRequest
include Google::Apis::Core::Hashable
# A group over an interval of rows or columns on a sheet, which can contain or
# be contained within other groups. A group can be collapsed or expanded as a
# unit on the sheet.
# Corresponds to the JSON property `dimensionGroup`
# @return [Google::Apis::SheetsV4::DimensionGroup]
attr_accessor :dimension_group
# The fields that should be updated. At least one field must be specified. The
# root `dimensionGroup` is implied and should not be specified. A single `"*"`
# can be used as short-hand for listing every field.
# Corresponds to the JSON property `fields`
# @return [String]
attr_accessor :fields
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@dimension_group = args[:dimension_group] if args.key?(:dimension_group)
@fields = args[:fields] if args.key?(:fields)
end
end
# Updates properties of dimensions within the specified range.
class UpdateDimensionPropertiesRequest
include Google::Apis::Core::Hashable
# A range along a single dimension on a DATA_SOURCE sheet.
# Corresponds to the JSON property `dataSourceSheetRange`
# @return [Google::Apis::SheetsV4::DataSourceSheetDimensionRange]
attr_accessor :data_source_sheet_range
# The fields that should be updated. At least one field must be specified. The
# root `properties` is implied and should not be specified. A single `"*"` can
# be used as short-hand for listing every field.
# Corresponds to the JSON property `fields`
# @return [String]
attr_accessor :fields
# Properties about a dimension.
# Corresponds to the JSON property `properties`
# @return [Google::Apis::SheetsV4::DimensionProperties]
attr_accessor :properties
# A range along a single dimension on a sheet. All indexes are zero-based.
# Indexes are half open: the start index is inclusive and the end index is
# exclusive. Missing indexes indicate the range is unbounded on that side.
# Corresponds to the JSON property `range`
# @return [Google::Apis::SheetsV4::DimensionRange]
attr_accessor :range
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data_source_sheet_range = args[:data_source_sheet_range] if args.key?(:data_source_sheet_range)
@fields = args[:fields] if args.key?(:fields)
@properties = args[:properties] if args.key?(:properties)
@range = args[:range] if args.key?(:range)
end
end
# Updates an embedded object's border property.
class UpdateEmbeddedObjectBorderRequest
include Google::Apis::Core::Hashable
# A border along an embedded object.
# Corresponds to the JSON property `border`
# @return [Google::Apis::SheetsV4::EmbeddedObjectBorder]
attr_accessor :border
# The fields that should be updated. At least one field must be specified. The
# root `border` is implied and should not be specified. A single `"*"` can be
# used as short-hand for listing every field.
# Corresponds to the JSON property `fields`
# @return [String]
attr_accessor :fields
# The ID of the embedded object to update.
# Corresponds to the JSON property `objectId`
# @return [Fixnum]
attr_accessor :object_id_prop
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@border = args[:border] if args.key?(:border)
@fields = args[:fields] if args.key?(:fields)
@object_id_prop = args[:object_id_prop] if args.key?(:object_id_prop)
end
end
# Update an embedded object's position (such as a moving or resizing a chart or
# image).
class UpdateEmbeddedObjectPositionRequest
include Google::Apis::Core::Hashable
# The fields of OverlayPosition that should be updated when setting a new
# position. Used only if newPosition.overlayPosition is set, in which case at
# least one field must be specified. The root `newPosition.overlayPosition` is
# implied and should not be specified. A single `"*"` can be used as short-hand
# for listing every field.
# Corresponds to the JSON property `fields`
# @return [String]
attr_accessor :fields
# The position of an embedded object such as a chart.
# Corresponds to the JSON property `newPosition`
# @return [Google::Apis::SheetsV4::EmbeddedObjectPosition]
attr_accessor :new_position
# The ID of the object to moved.
# Corresponds to the JSON property `objectId`
# @return [Fixnum]
attr_accessor :object_id_prop
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@fields = args[:fields] if args.key?(:fields)
@new_position = args[:new_position] if args.key?(:new_position)
@object_id_prop = args[:object_id_prop] if args.key?(:object_id_prop)
end
end
# The result of updating an embedded object's position.
class UpdateEmbeddedObjectPositionResponse
include Google::Apis::Core::Hashable
# The position of an embedded object such as a chart.
# Corresponds to the JSON property `position`
# @return [Google::Apis::SheetsV4::EmbeddedObjectPosition]
attr_accessor :position
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@position = args[:position] if args.key?(:position)
end
end
# Updates properties of the filter view.
class UpdateFilterViewRequest
include Google::Apis::Core::Hashable
# The fields that should be updated. At least one field must be specified. The
# root `filter` is implied and should not be specified. A single `"*"` can be
# used as short-hand for listing every field.
# Corresponds to the JSON property `fields`
# @return [String]
attr_accessor :fields
# A filter view.
# Corresponds to the JSON property `filter`
# @return [Google::Apis::SheetsV4::FilterView]
attr_accessor :filter
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@fields = args[:fields] if args.key?(:fields)
@filter = args[:filter] if args.key?(:filter)
end
end
# Updates properties of the named range with the specified namedRangeId.
class UpdateNamedRangeRequest
include Google::Apis::Core::Hashable
# The fields that should be updated. At least one field must be specified. The
# root `namedRange` is implied and should not be specified. A single `"*"` can
# be used as short-hand for listing every field.
# Corresponds to the JSON property `fields`
# @return [String]
attr_accessor :fields
# A named range.
# Corresponds to the JSON property `namedRange`
# @return [Google::Apis::SheetsV4::NamedRange]
attr_accessor :named_range
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@fields = args[:fields] if args.key?(:fields)
@named_range = args[:named_range] if args.key?(:named_range)
end
end
# Updates an existing protected range with the specified protectedRangeId.
class UpdateProtectedRangeRequest
include Google::Apis::Core::Hashable
# The fields that should be updated. At least one field must be specified. The
# root `protectedRange` is implied and should not be specified. A single `"*"`
# can be used as short-hand for listing every field.
# Corresponds to the JSON property `fields`
# @return [String]
attr_accessor :fields
# A protected range.
# Corresponds to the JSON property `protectedRange`
# @return [Google::Apis::SheetsV4::ProtectedRange]
attr_accessor :protected_range
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@fields = args[:fields] if args.key?(:fields)
@protected_range = args[:protected_range] if args.key?(:protected_range)
end
end
# Updates properties of the sheet with the specified sheetId.
class UpdateSheetPropertiesRequest
include Google::Apis::Core::Hashable
# The fields that should be updated. At least one field must be specified. The
# root `properties` is implied and should not be specified. A single `"*"` can
# be used as short-hand for listing every field.
# Corresponds to the JSON property `fields`
# @return [String]
attr_accessor :fields
# Properties of a sheet.
# Corresponds to the JSON property `properties`
# @return [Google::Apis::SheetsV4::SheetProperties]
attr_accessor :properties
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@fields = args[:fields] if args.key?(:fields)
@properties = args[:properties] if args.key?(:properties)
end
end
# Updates a slicer's specifications. (This does not move or resize a slicer. To
# move or resize a slicer use UpdateEmbeddedObjectPositionRequest.
class UpdateSlicerSpecRequest
include Google::Apis::Core::Hashable
# The fields that should be updated. At least one field must be specified. The
# root `SlicerSpec` is implied and should not be specified. A single "*"` can be
# used as short-hand for listing every field.
# Corresponds to the JSON property `fields`
# @return [String]
attr_accessor :fields
# The id of the slicer to update.
# Corresponds to the JSON property `slicerId`
# @return [Fixnum]
attr_accessor :slicer_id
# The specifications of a slicer.
# Corresponds to the JSON property `spec`
# @return [Google::Apis::SheetsV4::SlicerSpec]
attr_accessor :spec
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@fields = args[:fields] if args.key?(:fields)
@slicer_id = args[:slicer_id] if args.key?(:slicer_id)
@spec = args[:spec] if args.key?(:spec)
end
end
# Updates properties of a spreadsheet.
class UpdateSpreadsheetPropertiesRequest
include Google::Apis::Core::Hashable
# The fields that should be updated. At least one field must be specified. The
# root 'properties' is implied and should not be specified. A single `"*"` can
# be used as short-hand for listing every field.
# Corresponds to the JSON property `fields`
# @return [String]
attr_accessor :fields
# Properties of a spreadsheet.
# Corresponds to the JSON property `properties`
# @return [Google::Apis::SheetsV4::SpreadsheetProperties]
attr_accessor :properties
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@fields = args[:fields] if args.key?(:fields)
@properties = args[:properties] if args.key?(:properties)
end
end
# The response when updating a range of values by a data filter in a spreadsheet.
class UpdateValuesByDataFilterResponse
include Google::Apis::Core::Hashable
# Filter that describes what data should be selected or returned from a request.
# Corresponds to the JSON property `dataFilter`
# @return [Google::Apis::SheetsV4::DataFilter]
attr_accessor :data_filter
# The number of cells updated.
# Corresponds to the JSON property `updatedCells`
# @return [Fixnum]
attr_accessor :updated_cells
# The number of columns where at least one cell in the column was updated.
# Corresponds to the JSON property `updatedColumns`
# @return [Fixnum]
attr_accessor :updated_columns
# Data within a range of the spreadsheet.
# Corresponds to the JSON property `updatedData`
# @return [Google::Apis::SheetsV4::ValueRange]
attr_accessor :updated_data
# The range (in A1 notation) that updates were applied to.
# Corresponds to the JSON property `updatedRange`
# @return [String]
attr_accessor :updated_range
# The number of rows where at least one cell in the row was updated.
# Corresponds to the JSON property `updatedRows`
# @return [Fixnum]
attr_accessor :updated_rows
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data_filter = args[:data_filter] if args.key?(:data_filter)
@updated_cells = args[:updated_cells] if args.key?(:updated_cells)
@updated_columns = args[:updated_columns] if args.key?(:updated_columns)
@updated_data = args[:updated_data] if args.key?(:updated_data)
@updated_range = args[:updated_range] if args.key?(:updated_range)
@updated_rows = args[:updated_rows] if args.key?(:updated_rows)
end
end
# The response when updating a range of values in a spreadsheet.
class UpdateValuesResponse
include Google::Apis::Core::Hashable
# The spreadsheet the updates were applied to.
# Corresponds to the JSON property `spreadsheetId`
# @return [String]
attr_accessor :spreadsheet_id
# The number of cells updated.
# Corresponds to the JSON property `updatedCells`
# @return [Fixnum]
attr_accessor :updated_cells
# The number of columns where at least one cell in the column was updated.
# Corresponds to the JSON property `updatedColumns`
# @return [Fixnum]
attr_accessor :updated_columns
# Data within a range of the spreadsheet.
# Corresponds to the JSON property `updatedData`
# @return [Google::Apis::SheetsV4::ValueRange]
attr_accessor :updated_data
# The range (in A1 notation) that updates were applied to.
# Corresponds to the JSON property `updatedRange`
# @return [String]
attr_accessor :updated_range
# The number of rows where at least one cell in the row was updated.
# Corresponds to the JSON property `updatedRows`
# @return [Fixnum]
attr_accessor :updated_rows
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@spreadsheet_id = args[:spreadsheet_id] if args.key?(:spreadsheet_id)
@updated_cells = args[:updated_cells] if args.key?(:updated_cells)
@updated_columns = args[:updated_columns] if args.key?(:updated_columns)
@updated_data = args[:updated_data] if args.key?(:updated_data)
@updated_range = args[:updated_range] if args.key?(:updated_range)
@updated_rows = args[:updated_rows] if args.key?(:updated_rows)
end
end
# Data within a range of the spreadsheet.
class ValueRange
include Google::Apis::Core::Hashable
# The major dimension of the values. For output, if the spreadsheet data is: `A1=
# 1,B1=2,A2=3,B2=4`, then requesting `range=A1:B2,majorDimension=ROWS` will
# return `[[1,2],[3,4]]`, whereas requesting `range=A1:B2,majorDimension=COLUMNS`
# will return `[[1,3],[2,4]]`. For input, with `range=A1:B2,majorDimension=ROWS`
# then `[[1,2],[3,4]]` will set `A1=1,B1=2,A2=3,B2=4`. With `range=A1:B2,
# majorDimension=COLUMNS` then `[[1,2],[3,4]]` will set `A1=1,B1=3,A2=2,B2=4`.
# When writing, if this field is not set, it defaults to ROWS.
# Corresponds to the JSON property `majorDimension`
# @return [String]
attr_accessor :major_dimension
# The range the values cover, in A1 notation. For output, this range indicates
# the entire requested range, even though the values will exclude trailing rows
# and columns. When appending values, this field represents the range to search
# for a table, after which values will be appended.
# Corresponds to the JSON property `range`
# @return [String]
attr_accessor :range
# The data that was read or to be written. This is an array of arrays, the outer
# array representing all the data and each inner array representing a major
# dimension. Each item in the inner array corresponds with one cell. For output,
# empty trailing rows and columns will not be included. For input, supported
# value types are: bool, string, and double. Null values will be skipped. To set
# a cell to an empty value, set the string value to an empty string.
# Corresponds to the JSON property `values`
# @return [Array<Array<Object>>]
attr_accessor :values
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@major_dimension = args[:major_dimension] if args.key?(:major_dimension)
@range = args[:range] if args.key?(:range)
@values = args[:values] if args.key?(:values)
end
end
# Styles for a waterfall chart column.
class WaterfallChartColumnStyle
include Google::Apis::Core::Hashable
# Represents a color in the RGBA color space. This representation is designed
# for simplicity of conversion to/from color representations in various
# languages over compactness; for example, the fields of this representation can
# be trivially provided to the constructor of "java.awt.Color" in Java; it can
# also be trivially provided to UIColor's "+colorWithRed:green:blue:alpha"
# method in iOS; and, with just a little work, it can be easily formatted into a
# CSS "rgba()" string in JavaScript, as well. Note: this proto does not carry
# information about the absolute color space that should be used to interpret
# the RGB value (e.g. sRGB, Adobe RGB, DCI-P3, BT.2020, etc.). By default,
# applications SHOULD assume the sRGB color space. Note: when color equality
# needs to be decided, implementations, unless documented otherwise, will treat
# two colors to be equal if all their red, green, blue and alpha values each
# differ by at most 1e-5. Example (Java): import com.google.type.Color; // ...
# public static java.awt.Color fromProto(Color protocolor) ` float alpha =
# protocolor.hasAlpha() ? protocolor.getAlpha().getValue() : 1.0; return new
# java.awt.Color( protocolor.getRed(), protocolor.getGreen(), protocolor.getBlue(
# ), alpha); ` public static Color toProto(java.awt.Color color) ` float red = (
# float) color.getRed(); float green = (float) color.getGreen(); float blue = (
# float) color.getBlue(); float denominator = 255.0; Color.Builder resultBuilder
# = Color .newBuilder() .setRed(red / denominator) .setGreen(green / denominator)
# .setBlue(blue / denominator); int alpha = color.getAlpha(); if (alpha != 255)
# ` result.setAlpha( FloatValue .newBuilder() .setValue(((float) alpha) /
# denominator) .build()); ` return resultBuilder.build(); ` // ... Example (iOS /
# Obj-C): // ... static UIColor* fromProto(Color* protocolor) ` float red = [
# protocolor red]; float green = [protocolor green]; float blue = [protocolor
# blue]; FloatValue* alpha_wrapper = [protocolor alpha]; float alpha = 1.0; if (
# alpha_wrapper != nil) ` alpha = [alpha_wrapper value]; ` return [UIColor
# colorWithRed:red green:green blue:blue alpha:alpha]; ` static Color* toProto(
# UIColor* color) ` CGFloat red, green, blue, alpha; if (![color getRed:&red
# green:&green blue:&blue alpha:&alpha]) ` return nil; ` Color* result = [[Color
# alloc] init]; [result setRed:red]; [result setGreen:green]; [result setBlue:
# blue]; if (alpha <= 0.9999) ` [result setAlpha:floatWrapperWithValue(alpha)]; `
# [result autorelease]; return result; ` // ... Example (JavaScript): // ...
# var protoToCssColor = function(rgb_color) ` var redFrac = rgb_color.red || 0.0;
# var greenFrac = rgb_color.green || 0.0; var blueFrac = rgb_color.blue || 0.0;
# var red = Math.floor(redFrac * 255); var green = Math.floor(greenFrac * 255);
# var blue = Math.floor(blueFrac * 255); if (!('alpha' in rgb_color)) ` return
# rgbToCssColor_(red, green, blue); ` var alphaFrac = rgb_color.alpha.value || 0.
# 0; var rgbParams = [red, green, blue].join(','); return ['rgba(', rgbParams, ',
# ', alphaFrac, ')'].join(''); `; var rgbToCssColor_ = function(red, green, blue)
# ` var rgbNumber = new Number((red << 16) | (green << 8) | blue); var
# hexString = rgbNumber.toString(16); var missingZeros = 6 - hexString.length;
# var resultBuilder = ['#']; for (var i = 0; i < missingZeros; i++) `
# resultBuilder.push('0'); ` resultBuilder.push(hexString); return resultBuilder.
# join(''); `; // ...
# Corresponds to the JSON property `color`
# @return [Google::Apis::SheetsV4::Color]
attr_accessor :color
# A color value.
# Corresponds to the JSON property `colorStyle`
# @return [Google::Apis::SheetsV4::ColorStyle]
attr_accessor :color_style
# The label of the column's legend.
# Corresponds to the JSON property `label`
# @return [String]
attr_accessor :label
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@color = args[:color] if args.key?(:color)
@color_style = args[:color_style] if args.key?(:color_style)
@label = args[:label] if args.key?(:label)
end
end
# A custom subtotal column for a waterfall chart series.
class WaterfallChartCustomSubtotal
include Google::Apis::Core::Hashable
# True if the data point at subtotal_index is the subtotal. If false, the
# subtotal will be computed and appear after the data point.
# Corresponds to the JSON property `dataIsSubtotal`
# @return [Boolean]
attr_accessor :data_is_subtotal
alias_method :data_is_subtotal?, :data_is_subtotal
# A label for the subtotal column.
# Corresponds to the JSON property `label`
# @return [String]
attr_accessor :label
# The 0-based index of a data point within the series. If data_is_subtotal is
# true, the data point at this index is the subtotal. Otherwise, the subtotal
# appears after the data point with this index. A series can have multiple
# subtotals at arbitrary indices, but subtotals do not affect the indices of the
# data points. For example, if a series has three data points, their indices
# will always be 0, 1, and 2, regardless of how many subtotals exist on the
# series or what data points they are associated with.
# Corresponds to the JSON property `subtotalIndex`
# @return [Fixnum]
attr_accessor :subtotal_index
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data_is_subtotal = args[:data_is_subtotal] if args.key?(:data_is_subtotal)
@label = args[:label] if args.key?(:label)
@subtotal_index = args[:subtotal_index] if args.key?(:subtotal_index)
end
end
# The domain of a waterfall chart.
class WaterfallChartDomain
include Google::Apis::Core::Hashable
# The data included in a domain or series.
# Corresponds to the JSON property `data`
# @return [Google::Apis::SheetsV4::ChartData]
attr_accessor :data
# True to reverse the order of the domain values (horizontal axis).
# Corresponds to the JSON property `reversed`
# @return [Boolean]
attr_accessor :reversed
alias_method :reversed?, :reversed
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data = args[:data] if args.key?(:data)
@reversed = args[:reversed] if args.key?(:reversed)
end
end
# A single series of data for a waterfall chart.
class WaterfallChartSeries
include Google::Apis::Core::Hashable
# Custom subtotal columns appearing in this series. The order in which subtotals
# are defined is not significant. Only one subtotal may be defined for each data
# point.
# Corresponds to the JSON property `customSubtotals`
# @return [Array<Google::Apis::SheetsV4::WaterfallChartCustomSubtotal>]
attr_accessor :custom_subtotals
# The data included in a domain or series.
# Corresponds to the JSON property `data`
# @return [Google::Apis::SheetsV4::ChartData]
attr_accessor :data
# Settings for one set of data labels. Data labels are annotations that appear
# next to a set of data, such as the points on a line chart, and provide
# additional information about what the data represents, such as a text
# representation of the value behind that point on the graph.
# Corresponds to the JSON property `dataLabel`
# @return [Google::Apis::SheetsV4::DataLabel]
attr_accessor :data_label
# True to hide the subtotal column from the end of the series. By default, a
# subtotal column will appear at the end of each series. Setting this field to
# true will hide that subtotal column for this series.
# Corresponds to the JSON property `hideTrailingSubtotal`
# @return [Boolean]
attr_accessor :hide_trailing_subtotal
alias_method :hide_trailing_subtotal?, :hide_trailing_subtotal
# Styles for a waterfall chart column.
# Corresponds to the JSON property `negativeColumnsStyle`
# @return [Google::Apis::SheetsV4::WaterfallChartColumnStyle]
attr_accessor :negative_columns_style
# Styles for a waterfall chart column.
# Corresponds to the JSON property `positiveColumnsStyle`
# @return [Google::Apis::SheetsV4::WaterfallChartColumnStyle]
attr_accessor :positive_columns_style
# Styles for a waterfall chart column.
# Corresponds to the JSON property `subtotalColumnsStyle`
# @return [Google::Apis::SheetsV4::WaterfallChartColumnStyle]
attr_accessor :subtotal_columns_style
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@custom_subtotals = args[:custom_subtotals] if args.key?(:custom_subtotals)
@data = args[:data] if args.key?(:data)
@data_label = args[:data_label] if args.key?(:data_label)
@hide_trailing_subtotal = args[:hide_trailing_subtotal] if args.key?(:hide_trailing_subtotal)
@negative_columns_style = args[:negative_columns_style] if args.key?(:negative_columns_style)
@positive_columns_style = args[:positive_columns_style] if args.key?(:positive_columns_style)
@subtotal_columns_style = args[:subtotal_columns_style] if args.key?(:subtotal_columns_style)
end
end
# A waterfall chart.
class WaterfallChartSpec
include Google::Apis::Core::Hashable
# Properties that describe the style of a line.
# Corresponds to the JSON property `connectorLineStyle`
# @return [Google::Apis::SheetsV4::LineStyle]
attr_accessor :connector_line_style
# The domain of a waterfall chart.
# Corresponds to the JSON property `domain`
# @return [Google::Apis::SheetsV4::WaterfallChartDomain]
attr_accessor :domain
# True to interpret the first value as a total.
# Corresponds to the JSON property `firstValueIsTotal`
# @return [Boolean]
attr_accessor :first_value_is_total
alias_method :first_value_is_total?, :first_value_is_total
# True to hide connector lines between columns.
# Corresponds to the JSON property `hideConnectorLines`
# @return [Boolean]
attr_accessor :hide_connector_lines
alias_method :hide_connector_lines?, :hide_connector_lines
# The data this waterfall chart is visualizing.
# Corresponds to the JSON property `series`
# @return [Array<Google::Apis::SheetsV4::WaterfallChartSeries>]
attr_accessor :series
# The stacked type.
# Corresponds to the JSON property `stackedType`
# @return [String]
attr_accessor :stacked_type
# Settings for one set of data labels. Data labels are annotations that appear
# next to a set of data, such as the points on a line chart, and provide
# additional information about what the data represents, such as a text
# representation of the value behind that point on the graph.
# Corresponds to the JSON property `totalDataLabel`
# @return [Google::Apis::SheetsV4::DataLabel]
attr_accessor :total_data_label
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@connector_line_style = args[:connector_line_style] if args.key?(:connector_line_style)
@domain = args[:domain] if args.key?(:domain)
@first_value_is_total = args[:first_value_is_total] if args.key?(:first_value_is_total)
@hide_connector_lines = args[:hide_connector_lines] if args.key?(:hide_connector_lines)
@series = args[:series] if args.key?(:series)
@stacked_type = args[:stacked_type] if args.key?(:stacked_type)
@total_data_label = args[:total_data_label] if args.key?(:total_data_label)
end
end
end
end
end