* Default NO_REPLY_ADDRESS to DOMAIN
The default NO_REPLY_ADDRESS was previously noreply.example.org
This PR changes this to default to the default DOMAIN for gitea.
* Change default to noreply.%(DOMAIN)s
* Change default to "noreply" + Domain
* Support custom sanitization policy
Allowing the gitea administrator to configure sanitization policy allows
them to couple external renders and custom templates to support more
markup. In particular, the `pandoc` renderer allows generating KaTeX
annotations, wrapping them in `<span>` elements with class `math` and
either `inline` or `display` (depending on whether or not inline or
block mode was requested).
This iteration gives the administrator whitelisting powers; carefully
crafted regexes will thus let through only the desired attributes
necessary to support their custom markup.
Resolves: #9054
Signed-off-by: Alexander Scheel <alexander.m.scheel@gmail.com>
* Document new sanitization configuration
- Adds basic documentation to app.ini.sample,
- Adds an example to the Configuration Cheat Sheet, and
- Adds extended information to External Renderers section.
Signed-off-by: Alexander Scheel <alexander.m.scheel@gmail.com>
* Drop extraneous length check in newMarkupSanitizer(...)
Signed-off-by: Alexander Scheel <alexander.m.scheel@gmail.com>
* Fix plural ELEMENT and ALLOW_ATTR in docs
These were left over from their initial names. Make them singular to
conform with the current expectations.
Signed-off-by: Alexander Scheel <alexander.m.scheel@gmail.com>
* add [ui] Reactions
* move contend check from form to go functions
* use else if
* check if reaction is allowed only on react
(so previous custom reaction can be still removed)
* use $.AllowedReactions in templates
* use ctx.Flash.Error
* use it there too
* add redirection
* back to server error
because a wrong reaction is a template issue ...
* add emoji list link
* add docs entry
* small wording nit
suggestions from @jolheiser - thx
* same reactions as github
* fix PR reactions
* handle error so template JS could check
* Add Integrations Test
* add REACTIONS setting to cheat-sheet doc page
* Add USE_SERVICE_WORKER setting
This will be very useful setting for anyone doing frontend work.
Fixes: https://github.com/go-gitea/gitea/issues/9044
* prevent potential syntax error on old browsers
* Graceful Shutdown for windows and others
Restructures modules/graceful, adding shutdown for windows, removing and
replacing the old minwinsvc code.
Creates a new waitGroup - terminate which allows for goroutines to
finish up after the shutdown of the servers.
Shutdown and terminate hooks are added for goroutines.
* Remove unused functions - these can be added in a different PR
* Add startup timeout functionality
* Document STARTUP_TIMEOUT
* Add retry for migration http/https requests
* give the more suitable name for retry configuraion items
* fix docs and lint
* Only use retryDownloader when setting > 1
* Add support for AUTO_WATCH_ON_CHANGES and AUTO_WATCH_ON_CLONE
* Update models/repo_watch.go
Co-Authored-By: Lauris BH <lauris@nix.lv>
* Round up changes suggested by lafriks
* Added changes suggested from automated tests
* Updated deleteUser to take RepoWatchModeDont into account, corrected inverted DefaultWatchOnClone and DefaultWatchOnChanges behaviour, updated and added tests.
* Reinsert import "github.com/Unknwon/com" on http.go
* Add migration for new column `watch`.`mode`
* Remove serv code
* Remove WATCH_ON_CLONE; use hooks, add integrations
* Renamed watch_test.go to repo_watch_test.go
* Correct fmt
* Add missing EOL
* Correct name of test function
* Reword cheat and ini descriptions
* Add update to migration to ensure column value
* Clarify comment
Co-Authored-By: zeripath <art27@cantab.net>
* Simplify if condition
* in progress changes for #7405, added ability to add cross-repo dependencies
* removed unused repolink var
* fixed query that was breaking ci tests; fixed check in issue dependency add so that the id of the issue and dependency is checked rather than the indexes
* reverted removal of string in local files becasue these are done via crowdin, not updated manually
* removed 'Select("issue.*")' from getBlockedByDependencies and getBlockingDependencies based on comments in PR review
* changed getBlockedByDependencies and getBlockingDependencies to use a more xorm-like query, also updated the sidebar as a result
* simplified the getBlockingDependencies and getBlockedByDependencies methods; changed the sidebar to show the dependencies in a different format where you can see the name of the repository
* made some changes to the issue view in the dependencies (issue name on top, repo full name on separate line). Change view of issue in the dependency search results (also showing the full repo name on separate line)
* replace call to FindUserAccessibleRepoIDs with SearchRepositoryByName. The former was hardcoded to use isPrivate = false on the repo search, but this code needed it to be true. The SearchRepositoryByName method is used more in the code including on the user's dashboard
* some more tweaks to the layout of the issues when showing dependencies and in the search box when you add new dependencies
* added Name to the RepositoryMeta struct
* updated swagger doc
* fixed total count for link header on SearchIssues
* fixed indentation
* fixed aligment of remove icon on dependencies in issue sidebar
* removed unnecessary nil check (unnecessary because issue.loadRepo is called prior to this block)
* reverting .css change, somehow missed or forgot that less is used
* updated less file and generated css; updated sidebar template with styles to line up delete and issue index
* added ordering to the blocked by/depends on queries
* fixed sorting in issue dependency search and the depends on/blocks views to show issues from the current repo first, then by created date descending; added a "all cross repository dependencies" setting to allow this feature to be turned off, if turned off, the issue dependency search will work the way it did before (restricted to the current repository)
* re-applied my swagger changes after merge
* fixed split string condition in issue search
* changed ALLOW_CROSS_REPOSITORY_DEPENDENCIES description to sound more global than just the issue dependency search; returning 400 in the cross repo issue search api method if not enabled; fixed bug where the issue count did not respect the state parameter
* when adding a dependency to an issue, added a check to make sure the issue and dependency are in the same repo if cross repo dependencies is not enabled
* updated sortIssuesSession call in PullRequests, another commit moved this method from pull.go to pull_list.go so I had to re-apply my change here
* fixed incorrect setting of user id parameter in search repos call
* static url
* add cors support for static resources
* [assets] work on the migration to configurable url for assets
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [misc] fix whitespace
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [assets] fix the loading of the manifest.json
It is generated dynamically, and as such can not be served by the cdn.
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* Revert "add cors support for static resources"
This reverts commit 42f964fd181dbb8b139808b9be623470d4f0e40f
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [docs] add the STATIC_URL_PREFIX option
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [docs] reverse-proxy: nginx: add two setups for STATIC_URL_PREFIX
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [assets] migrate the url of a new asset to the static url prefix
REF: f2a3abc683
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* Expose db.SetMaxOpenConns and allow other dbs to set their connection params
* Add note about port exhaustion
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
This PR fixes#7598 by providing a configurable way of signing commits across the Gitea instance. Per repository configurability and import/generation of trusted secure keys is not provided by this PR - from a security PoV that's probably impossible to do properly. Similarly web-signing, that is asking the user to sign something, is not implemented - this could be done at a later stage however.
## Features
- [x] If commit.gpgsign is set in .gitconfig sign commits and files created through repofiles. (merges should already have been signed.)
- [x] Verify commits signed with the default gpg as valid
- [x] Signer, Committer and Author can all be different
- [x] Allow signer to be arbitrarily different - We still require the key to have an activated email on Gitea. A more complete implementation would be to use a keyserver and mark external-or-unactivated with an "unknown" trust level icon.
- [x] Add a signing-key.gpg endpoint to get the default gpg pub key if available
- Rather than add a fake web-flow user I've added this as an endpoint on /api/v1/signing-key.gpg
- [x] Try to match the default key with a user on gitea - this is done at verification time
- [x] Make things configurable?
- app.ini configuration done
- [x] when checking commits are signed need to check if they're actually verifiable too
- [x] Add documentation
I have decided that adjusting the docker to create a default gpg key is not the correct thing to do and therefore have not implemented this.
* Prevent deadlock in indexer initialisation during graceful restart
* Move from gracehttp to our own service to add graceful ssh
* Add timeout for start of indexers and make hammer time configurable
* Fix issue with re-initialization in indexer during tests
* move the code to detect use of closed to graceful
* Handle logs gracefully - add a pid suffix just before restart
* Move to using a cond and a holder for indexers
* use time.Since
* Add some comments and attribution
* update modules.txt
* Use zero to disable timeout
* Move RestartProcess to its own file
* Add cleanup routine
* Update app.ini.sample
Give further information on hyperlink rendering in Markdown
* Update app.ini.sample
Follow feedback from @guillep2k for CUSTOM_URL in markdown to indicate http and https are always rendered as links.
* Update custom/conf/app.ini.sample
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Update custom/conf/app.ini.sample
Co-Authored-By: Antoine GIRARD <sapk@users.noreply.github.com>
Add password complexity checks. The default settings require a lowercase, uppercase, number and a special character within passwords.
Co-Authored-By: T-M-A <maxim.tkachenko@gmail.com>
Co-Authored-By: Lanre Adelowo <adelowomailbox@gmail.com>
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-Authored-By: Lauris BH <lauris@nix.lv>
* Restrict repository indexing by file extension
* Use REPO_EXTENSIONS_LIST_INCLUDE instead of REPO_EXTENSIONS_LIST_EXCLUDE and have a more flexible extension pattern
* Corrected to pass lint gosimple
* Add wildcard support to REPO_INDEXER_EXTENSIONS
* This reverts commit 72a650c8e42f4abf59d5df7cd5dc27b451494cc6.
* Add wildcard support to REPO_INDEXER_EXTENSIONS (no make vendor)
* Simplify isIndexable() for better clarity
* Add gobwas/glob to vendors
* manually set appengine new release
* Implement better REPO_INDEXER_INCLUDE and REPO_INDEXER_EXCLUDE
* Add unit and integration tests
* Update app.ini.sample and reword config-cheat-sheet
* Add doc page and correct app.ini.sample
* Some polish on the doc
* Simplify code as suggested by @lafriks
* Add Backend Logic for Toggling Email Notification
This commit adds the backend logic for
allowing users to enable or disable email
notifications. The implementation ensures
that only issue notification emails get disabled
and important emails are still sent regardless
of the setting.
The UI to toggle this setting has not yet been
implemented.
* Add UI and complete user email notification enable
This commit completes the functionality to allow
users to disable their own email notifications.
Signed-off-by: Gary Kim <gary@garykim.dev>
* Add Third Option for Only Email on Mention
Signed-off-by: Gary Kim <gary@garykim.dev>
* Readd NOT NULL to new preference string
Signed-off-by: Gary Kim <gary@garykim.dev>
* Add Tests and Rewrite Comment
Signed-off-by: Gary Kim <gary@garykim.dev>
* Allow admin to set default email frequency
Signed-off-by: Gary Kim <gary@garykim.dev>
* Add new config option to docs
Signed-off-by: Gary Kim <gary@garykim.dev>
* Fix a few mistakes
Signed-off-by: Gary Kim <gary@garykim.dev>
* Only update required columns
Signed-off-by: Gary Kim <gary@garykim.dev>
* Simplify an error check
Signed-off-by: Gary Kim <gary@garykim.dev>
* Make email_notification_preference column in DB be VARCHAR(20)
Signed-off-by: Gary Kim <gary@garykim.dev>
* Handle errors
Signed-off-by: Gary Kim <gary@garykim.dev>
* Update models/migrations/v93.go
Co-Authored-By: Lauris BH <lauris@nix.lv>
* Add description in repository search.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Refactor SearchRepositoryByName with a general function SearchRepository
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Allow to specify if description shall be included in API repo search.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Add new app.ini setting for whether to search within repo description.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Search keyword in description (if setting enabled) on:
- Explore page
- Organization profile page
- User profile page
- Admin repo page
Do not search keyword in description on:
- Any non-keyword search (not relevant)
- Incremental search (uses API)
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Put parameters related to keyword directly after it
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Add test cases for including (and not including) repository description in search.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Rename test function from TestSearchRepositoryByName to TestSearchRepository.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Make setting SEARCH_REPO_DESCRIPTION default to true
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Add support for DEFAULT_ORG_MEMBER_VISIBLE
* Correct formatting
* Improved description in cheat sheet.
* Add test for DefaultOrgMemberVisible
* Remove dead code
* display ui time with customize time location
* fix lint
* rename UILocation to DefaultUILocation
* move time related functions to modules/timeutil
* fix tests
* fix tests
* fix build
* fix swagger
* Only show repository avatar in list when one was selected
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Adds fallback configuration option for repository avatar
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Implements repository avatar fallback
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Adds admin task for deleting generated repository avatars
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Solve linting issues
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Save avatar before updating database
* Linting
* Update models/repo.go
Co-Authored-By: zeripath <art27@cantab.net>
* Repository avatars
- first variant of code from old work for gogs
- add migration 87
- add new option in app.ini
- add en-US locale string
- add new class in repository.less
* Add changed index.css, remove unused template name
* Update en-us doc about configuration options
* Add comments to new functions, add new option to docker app.ini
* Add comment for lint
* Remove variable, not needed
* Fix formatting
* Update swagger api template
* Check if avatar exists
* Fix avatar link/path checks
* Typo
* TEXT column can't have a default value
* Fixes:
- remove old avatar file on upload
- use ID in name of avatar file - users may upload same files
- add simple tests
* Fix fmt check
* Generate PNG instead of "static" GIF
* More informative comment
* Fix error message
* Update avatar upload checks:
- add file size check
- add new option
- update config docs
- add new string to en-us locale
* Fixes:
- use FileHEader field for check file size
- add new test - upload big image
* Fix formatting
* Update comments
* Update log message
* Removed wrong style - not needed
* Use Sync2 to migrate
* Update repos list view
- bigger avatar
- fix html blocks alignment
* A little adjust avatar size
* Use small icons for explore/repo list
* Use new cool avatar preparation func by @lafriks
* Missing changes for new function
* Remove unused import, move imports
* Missed new option definition in app.ini
Add file size check in user/profile avatar upload
* Use smaller field length for Avatar
* Use session to update repo DB data, update DeleteAvatar - use session too
* Fix err variable definition
* As suggested @lafriks - return as soon as possible, code readability
* Fix documentation on Oauth2.Enable flag
The docs list this as ENABLED, but in the source code it's
ENABLE, meaning following the docs leads to confusion.
* Update sample config for oauth2.ENABLE
Adds a new key DEFAULT_SHOW_FULL_NAME (default false) to the [ui] section.
If enabled the full name will be shown (unless it's empty, then
the default username will be used)
* Add SUBJECT_PREFIX mailer config option
* Add space between subject prefix and subject (Change from Gogs)
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add option to disable refresh token invalidation
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add integration tests and remove wrong todos
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix typo
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix tests and add documentation
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Panic don't fatal on create new logger
Fixes#5854
Signed-off-by: Andrew Thornton <art27@cantab.net>
* partial broken
* Update the logging infrastrcture
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Reset the skip levels for Fatal and Error
Signed-off-by: Andrew Thornton <art27@cantab.net>
* broken ncsa
* More log.Error fixes
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove nal
* set log-levels to lowercase
* Make console_test test all levels
* switch to lowercased levels
* OK now working
* Fix vetting issues
* Fix lint
* Fix tests
* change default logging to match current gitea
* Improve log testing
Signed-off-by: Andrew Thornton <art27@cantab.net>
* reset error skip levels to 0
* Update documentation and access logger configuration
* Redirect the router log back to gitea if redirect macaron log but also allow setting the log level - i.e. TRACE
* Fix broken level caching
* Refactor the router log
* Add Router logger
* Add colorizing options
* Adjust router colors
* Only create logger if they will be used
* update app.ini.sample
* rename Attribute ColorAttribute
* Change from white to green for function
* Set fatal/error levels
* Restore initial trace logger
* Fix Trace arguments in modules/auth/auth.go
* Properly handle XORMLogger
* Improve admin/config page
* fix fmt
* Add auto-compression of old logs
* Update error log levels
* Remove the unnecessary skip argument from Error, Fatal and Critical
* Add stacktrace support
* Fix tests
* Remove x/sync from vendors?
* Add stderr option to console logger
* Use filepath.ToSlash to protect against Windows in tests
* Remove prefixed underscores from names in colors.go
* Remove not implemented database logger
This was removed from Gogs on 4 Mar 2016 but left in the configuration
since then.
* Ensure that log paths are relative to ROOT_PATH
* use path.Join
* rename jsonConfig to logConfig
* Rename "config" to "jsonConfig" to make it clearer
* Requested changes
* Requested changes: XormLogger
* Try to color the windows terminal
If successful default to colorizing the console logs
* fixup
* Colorize initially too
* update vendor
* Colorize logs on default and remove if this is not a colorizing logger
* Fix documentation
* fix test
* Use go-isatty to detect if on windows we are on msys or cygwin
* Fix spelling mistake
* Add missing vendors
* More changes
* Rationalise the ANSI writer protection
* Adjust colors on advice from @0x5c
* Make Flags a comma separated list
* Move to use the windows constant for ENABLE_VIRTUAL_TERMINAL_PROCESSING
* Ensure matching is done on the non-colored message - to simpify EXPRESSION
* fixes#5957
* add tests to make sure config option is respected
* use already defined struct
* - use migration to make the flag repo wide not for the entire gitea instance
Also note that the config value can still be set so as to be able to control the value for new repositories that are to be created
- fix copy/paste error in copyright header year and rearrange import
- use repo config instead of server config value to determine if a commit should close an issue
- update testsuite
* use global config only when creating a new repository
* allow repo admin toggle feature via UI
* fix typo and improve testcase
* fix fixtures
* add DEFAULT prefix to config value
* fix test
* Feature - Pagination for git tree API
* Handles case when page is negative
* Does a for loop over the start and end rather than all entries
* Removed redundent logic
* Adds per_page as a query parameter
* Adds DEFAULT_GIT_TREES_PER_PAGE for settings, ran make fmt
* Fix typo in cheat-sheet en
* Makes page start at 1, generated swagger
* Use updates to SDK
* Updates to use latest sdk
* Updates swagger for tree api
* Adds test for GetTreeBySHA
* Updates per PR reviews
* Updates per PR reviews
* Remove file
* Formatting
* Fix to swagger file
* Fix to swagger
* Update v1_json.tmpl
* Fix to swagger file
* Create log mailer for testing email settings
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Switch on the log mailer for the integration tests
This ensures that the sending mail process works
Signed-off-by: Andrew Thornton <art27@cantab.net>
* rename the from user for mysql/mssql
* rename log sender to dummy sender
* update the integration tests
Add a new config option to enable / disable the automatic watching of
repos for new repositories and if a user is added to a team.
Fixes#653
Signed-off-by: Sebastian Sauer <sauer.sebastian@gmail.com>
* add migration and basic UI for changing a user's theme
* update user themem
* use right text on button
* load theme based on users' selection
* load theme based on users' selection in pwa too
* update sample config
* delete older theme loading
* implement AfterLoad to set users' theme properly
* set up default theme when creating a user. This uses the installation wide theme
* use flash messages for error
* set default theme when creating a user from the cli
* fix @lunny review
* remove old git-version from git-scm url in app.ini
The url includes the version of git, which is not required to view the
page. If you open the page without the version you get the current
version and it's possible to switch the used version.
Signed-off-by: Roman <romaaan.git@gmail.com>
* docs: mention the git-scm url for git configs
Signed-off-by: Roman <romaaan.git@gmail.com>
* prevent pull request to be merged when PR is a WIP
* add tests
* add helper to prepend WIP: in PR title
* move default wip prefixes into settings
* use configurable WIP prefixes in javascript and default to first one in templates
* add documentation
* add unit test on pull model
Signed-off-by: Julien Tant <julien@craftyx.fr>
* Initial ui components for pull request review
* Add Review
Add IssueComment types
Signed-off-by: Jonas Franz <info@jonasfranz.software>
(cherry picked from commit 2b4daab)
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Replace ReviewComment with Content
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add load functions
Add ReviewID to findComments
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add create review comment implementation
Add migration for review
Other small changes
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Simplified create and find functions for review
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Moved "Pending" to first position
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add GetCurrentReview to simplify fetching current review
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Preview for listing comments
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Move new comment form to its own file
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Implement Review form
Show Review comments on comment stream
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add support for single comments
Showing buttons in context
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add pending tag to pending review comments
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add unit tests for Review
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fetch all review ids at once
Add unit tests
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* gofmt
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Improved comment rendering in "Files" view by adding Comments to DiffLine
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add support for invalidating comments
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Switched back to code.gitea.io/git
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Moved review migration from v64 to v65
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Rebuild css
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* gofmt
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Improve translations
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix unit tests by updating fixtures and updating outdated test
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Comments will be shown at the right place now
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add support for deleting CodeComments
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix problems caused by files in subdirectories
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add support for showing code comments of reviews in conversation
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add support for "Show/Hide outdated"
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Update code.gitea.io/git
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add support for new webhooks
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Update comparison
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Resolve conflicts
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Minor UI improvements
* update code.gitea.io/git
* Fix ui bug reported by @lunny causing wrong position of add button
Add functionality to "Cancel" button
Add scale effects to add button
Hide "Cancel" button for existing comments
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Prepare solving conflicts
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Show add button only if no comments already exist for the line
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add missing vendor files
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Check if reviewer is nil
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Show forms only to users who are logged in
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Revert "Show forms only to users who are logged in"
This reverts commit c083682
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Save patch in comment
Render patch for code comments
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add link to comment in code
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add reply form to comment list
Show forms only to signed in users
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add 'Reply' as translatable
Add CODE_COMMENT_LINES setting
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* gofmt
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix problems introduced by checking for singed in user
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add v70
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Update generated stylesheet
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix preview
Beginn with new review comment patch system
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add new algo to generate diff for line range
Remove old algo used for cutting big diffs (it was very buggy)
* Add documentation and example for CutDiffAroundLine
* Fix example of CutDiffAroundLine
* Fix some comment UI rendering bugs
* Add code comment edit mode
* Send notifications / actions to users until review gets published
Fix diff generation bug
Fix wrong hashtag
* Fix vet errors
* Send notifications also for single comments
* Fix some notification bugs, fix link
* Fix: add comment icon is only shown on code lines
* Add lint comment
* Add unit tests for git diff
* Add more error messages
* Regenerated css
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* fmt
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Regenerated CSS with latest less version
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix test by updating comment type to new ID
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Introducing CodeComments as type for map[string]map[int64][]*Comment
Other minor code improvements
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix data-tab issues
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Remove unnecessary change
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* refactored checkForInvalidation
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Append comments instead of setting
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Use HeadRepo instead of BaseRepo
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Update migration
Signed-off-by: Jonas Franz <info@jonasfranz.de>
* Regenerated CSS
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add copyright
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Update index.css
Signed-off-by: Jonas Franz <info@jonasfranz.software>
This makes it easier for user who want to theme but
don't have the ability to know how to customize templates
all that is required is a change in a config option
The reason why I chose the DEFAULT_THEME as variable,
as perhaps in the future we will allow users to chose their
theme whon logged in just like we do with languages
Update the sample configuration and config cheat sheet description for
the LOCAL_ROOT_URL configuration variable to mention the special case
required if PROTOCOL is set to 'unix'.
Fixes#3741.
Signed-off-by: Timothée Ravier <tim@siosm.fr>
* Add support for U2F
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add vendor library
Add missing translations
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Minor improvements
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add U2F support for Firefox, Chrome (Android) by introducing a custom JS library
Add U2F error handling
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add U2F login page to OAuth
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Move U2F user settings to a separate file
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add unit tests for u2f model
Renamed u2f table name
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix problems caused by refactoring
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add U2F documentation
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Remove not needed console.log-s
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add default values to app.ini.sample
Add FIDO U2F to comparison
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix some comments in custom/conf/app.ini.sample
Some comments in app.ini.sample were very vague, didn't contain much information.
Some of them have been fixed, but mistakes that need to be fixed by an expert still remain, see #3928
Signed-off-by: Mikolaj Holysz <miki123211@gmail.com>
* Add an additional comment pointing to more documentation.
Add an additional comment to the top of the sample configuration file.
It contains a link pointing to gitea's docs and the configcheat sheet, which contains
some explanations about the parameters in the config.
Signed-off-by: Mikolaj Holysz <miki123211@gmail.com>
* Add an option to allow redirect of http port 80 to https.
This is an "opt in" option (default is to not redirect). It will only redirect
if protocol is https and the new REDIRECT_PORT_80 option is set to true.
The Port to redirect in previous commit was hardcoded to 80, now it can be
specified in the app.ini, defaulting to 80. The boolean option to turn
redirection on has been changed to REDIRECT_OTHER_PORT to be logically
consistent with the new port option.
Signed-off-by: Mike Fellows <mike.fellows@shaw.ca>
zeripath
Alexander Scheel
6543
silverwind
Lunny Xiao
guillep2k
Brad Albright
Jakob Ackermann
Benson Muite
Maxim Tkachenko
Gary Kim
David Svantesson
clavinet
Tamal Saha
Mura Li
EpicCoder
Mario Lubenka
Sergey Dryabzhinsky
Monty Taylor
Wim
Richard Mahn
Jonas Franz
Lanre Adelowo
Rémy Boulanouar
John Olheiser
sebastian-sauer
techknowlogick
Paul Brackin
Roman
Lauris BH
Patrick Lühne
Antoine GIRARD
Stanislav
Chih-Hsuan Yen
Russell Aunger
Julien Tant
Jerry Jacobs
Piotr Orzechowski
Kjell Kvinge
kolaente
techknowlogick
Fluf
Kim "BKC" Carlbäcker
François M
Inon S
David Schneiderbauer
3_1_3_u
Timothée Ravier
FabioFortini
mikolaj holysz
Bwko
Timo Schindler
Roman Egunkov
Mike Fellows
Sandro Santilli
Patrick Lühne
Jonas Bröms