google-api-ruby-client/google-api-client/generated/google/apis/fitness_v1/classes.rb

983 lines
42 KiB
Ruby

# Copyright 2015 Google Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
require 'date'
require 'google/apis/core/base_service'
require 'google/apis/core/json_representation'
require 'google/apis/core/hashable'
require 'google/apis/errors'
module Google
module Apis
module FitnessV1
#
class AggregateBucket
include Google::Apis::Core::Hashable
# Available for Bucket.Type.ACTIVITY_TYPE, Bucket.Type.ACTIVITY_SEGMENT
# Corresponds to the JSON property `activity`
# @return [Fixnum]
attr_accessor :activity
# There will be one dataset per AggregateBy in the request.
# Corresponds to the JSON property `dataset`
# @return [Array<Google::Apis::FitnessV1::Dataset>]
attr_accessor :dataset
# The end time for the aggregated data, in milliseconds since epoch, inclusive.
# Corresponds to the JSON property `endTimeMillis`
# @return [Fixnum]
attr_accessor :end_time_millis
# Sessions contain metadata, such as a user-friendly name and time interval
# information.
# Corresponds to the JSON property `session`
# @return [Google::Apis::FitnessV1::Session]
attr_accessor :session
# The start time for the aggregated data, in milliseconds since epoch, inclusive.
# Corresponds to the JSON property `startTimeMillis`
# @return [Fixnum]
attr_accessor :start_time_millis
# The type of a bucket signifies how the data aggregation is performed in the
# bucket.
# Corresponds to the JSON property `type`
# @return [String]
attr_accessor :type
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@activity = args[:activity] if args.key?(:activity)
@dataset = args[:dataset] if args.key?(:dataset)
@end_time_millis = args[:end_time_millis] if args.key?(:end_time_millis)
@session = args[:session] if args.key?(:session)
@start_time_millis = args[:start_time_millis] if args.key?(:start_time_millis)
@type = args[:type] if args.key?(:type)
end
end
# The specification of which data to aggregate.
class AggregateBy
include Google::Apis::Core::Hashable
# A data source ID to aggregate. Only data from the specified data source ID
# will be included in the aggregation. If specified, this data source must exist;
# the OAuth scopes in the supplied credentials must grant read access to this
# data type. The dataset in the response will have the same data source ID. Note:
# Data can be aggregated by either the dataTypeName or the dataSourceId, not
# both.
# Corresponds to the JSON property `dataSourceId`
# @return [String]
attr_accessor :data_source_id
# The data type to aggregate. All data sources providing this data type will
# contribute data to the aggregation. The response will contain a single dataset
# for this data type name. The dataset will have a data source ID of derived::
# com.google.android.gms:aggregated. If the user has no data for this data type,
# an empty data set will be returned. Note: Data can be aggregated by either the
# dataTypeName or the dataSourceId, not both.
# Corresponds to the JSON property `dataTypeName`
# @return [String]
attr_accessor :data_type_name
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data_source_id = args[:data_source_id] if args.key?(:data_source_id)
@data_type_name = args[:data_type_name] if args.key?(:data_type_name)
end
end
# Next id: 10
class AggregateRequest
include Google::Apis::Core::Hashable
# The specification of data to be aggregated. At least one aggregateBy spec must
# be provided. All data that is specified will be aggregated using the same
# bucketing criteria. There will be one dataset in the response for every
# aggregateBy spec.
# Corresponds to the JSON property `aggregateBy`
# @return [Array<Google::Apis::FitnessV1::AggregateBy>]
attr_accessor :aggregate_by
# Specifies that data be aggregated each activity segment recorded for a user.
# Similar to bucketByActivitySegment, but bucketing is done for each activity
# segment rather than all segments of the same type. Mutually exclusive of other
# bucketing specifications.
# Corresponds to the JSON property `bucketByActivitySegment`
# @return [Google::Apis::FitnessV1::BucketByActivity]
attr_accessor :bucket_by_activity_segment
# Specifies that data be aggregated by the type of activity being performed when
# the data was recorded. All data that was recorded during a certain activity
# type (.for the given time range) will be aggregated into the same bucket. Data
# that was recorded while the user was not active will not be included in the
# response. Mutually exclusive of other bucketing specifications.
# Corresponds to the JSON property `bucketByActivityType`
# @return [Google::Apis::FitnessV1::BucketByActivity]
attr_accessor :bucket_by_activity_type
# Specifies that data be aggregated by user sessions. Data that does not fall
# within the time range of a session will not be included in the response.
# Mutually exclusive of other bucketing specifications.
# Corresponds to the JSON property `bucketBySession`
# @return [Google::Apis::FitnessV1::BucketBySession]
attr_accessor :bucket_by_session
# Specifies that data be aggregated by a single time interval. Mutually
# exclusive of other bucketing specifications.
# Corresponds to the JSON property `bucketByTime`
# @return [Google::Apis::FitnessV1::BucketByTime]
attr_accessor :bucket_by_time
# The end of a window of time. Data that intersects with this time window will
# be aggregated. The time is in milliseconds since epoch, inclusive.
# Corresponds to the JSON property `endTimeMillis`
# @return [Fixnum]
attr_accessor :end_time_millis
# DO NOT POPULATE THIS FIELD. It is ignored.
# Corresponds to the JSON property `filteredDataQualityStandard`
# @return [Array<String>]
attr_accessor :filtered_data_quality_standard
# The start of a window of time. Data that intersects with this time window will
# be aggregated. The time is in milliseconds since epoch, inclusive.
# Corresponds to the JSON property `startTimeMillis`
# @return [Fixnum]
attr_accessor :start_time_millis
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@aggregate_by = args[:aggregate_by] if args.key?(:aggregate_by)
@bucket_by_activity_segment = args[:bucket_by_activity_segment] if args.key?(:bucket_by_activity_segment)
@bucket_by_activity_type = args[:bucket_by_activity_type] if args.key?(:bucket_by_activity_type)
@bucket_by_session = args[:bucket_by_session] if args.key?(:bucket_by_session)
@bucket_by_time = args[:bucket_by_time] if args.key?(:bucket_by_time)
@end_time_millis = args[:end_time_millis] if args.key?(:end_time_millis)
@filtered_data_quality_standard = args[:filtered_data_quality_standard] if args.key?(:filtered_data_quality_standard)
@start_time_millis = args[:start_time_millis] if args.key?(:start_time_millis)
end
end
#
class AggregateResponse
include Google::Apis::Core::Hashable
# A list of buckets containing the aggregated data.
# Corresponds to the JSON property `bucket`
# @return [Array<Google::Apis::FitnessV1::AggregateBucket>]
attr_accessor :bucket
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@bucket = args[:bucket] if args.key?(:bucket)
end
end
#
class Application
include Google::Apis::Core::Hashable
# An optional URI that can be used to link back to the application.
# Corresponds to the JSON property `detailsUrl`
# @return [String]
attr_accessor :details_url
# The name of this application. This is required for REST clients, but we do not
# enforce uniqueness of this name. It is provided as a matter of convenience for
# other developers who would like to identify which REST created an Application
# or Data Source.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# Package name for this application. This is used as a unique identifier when
# created by Android applications, but cannot be specified by REST clients. REST
# clients will have their developer project number reflected into the Data
# Source data stream IDs, instead of the packageName.
# Corresponds to the JSON property `packageName`
# @return [String]
attr_accessor :package_name
# Version of the application. You should update this field whenever the
# application changes in a way that affects the computation of the data.
# Corresponds to the JSON property `version`
# @return [String]
attr_accessor :version
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@details_url = args[:details_url] if args.key?(:details_url)
@name = args[:name] if args.key?(:name)
@package_name = args[:package_name] if args.key?(:package_name)
@version = args[:version] if args.key?(:version)
end
end
#
class BucketByActivity
include Google::Apis::Core::Hashable
# The default activity stream will be used if a specific activityDataSourceId is
# not specified.
# Corresponds to the JSON property `activityDataSourceId`
# @return [String]
attr_accessor :activity_data_source_id
# Specifies that only activity segments of duration longer than
# minDurationMillis are considered and used as a container for aggregated data.
# Corresponds to the JSON property `minDurationMillis`
# @return [Fixnum]
attr_accessor :min_duration_millis
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@activity_data_source_id = args[:activity_data_source_id] if args.key?(:activity_data_source_id)
@min_duration_millis = args[:min_duration_millis] if args.key?(:min_duration_millis)
end
end
#
class BucketBySession
include Google::Apis::Core::Hashable
# Specifies that only sessions of duration longer than minDurationMillis are
# considered and used as a container for aggregated data.
# Corresponds to the JSON property `minDurationMillis`
# @return [Fixnum]
attr_accessor :min_duration_millis
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@min_duration_millis = args[:min_duration_millis] if args.key?(:min_duration_millis)
end
end
#
class BucketByTime
include Google::Apis::Core::Hashable
# Specifies that result buckets aggregate data by exactly durationMillis time
# frames. Time frames that contain no data will be included in the response with
# an empty dataset.
# Corresponds to the JSON property `durationMillis`
# @return [Fixnum]
attr_accessor :duration_millis
#
# Corresponds to the JSON property `period`
# @return [Google::Apis::FitnessV1::BucketByTimePeriod]
attr_accessor :period
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@duration_millis = args[:duration_millis] if args.key?(:duration_millis)
@period = args[:period] if args.key?(:period)
end
end
#
class BucketByTimePeriod
include Google::Apis::Core::Hashable
# org.joda.timezone.DateTimeZone
# Corresponds to the JSON property `timeZoneId`
# @return [String]
attr_accessor :time_zone_id
#
# Corresponds to the JSON property `type`
# @return [String]
attr_accessor :type
#
# Corresponds to the JSON property `value`
# @return [Fixnum]
attr_accessor :value
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@time_zone_id = args[:time_zone_id] if args.key?(:time_zone_id)
@type = args[:type] if args.key?(:type)
@value = args[:value] if args.key?(:value)
end
end
# Represents a single data point, generated by a particular data source. A data
# point holds a value for each field, an end timestamp and an optional start
# time. The exact semantics of each of these attributes are specified in the
# documentation for the particular data type. A data point can represent an
# instantaneous measurement, reading or input observation, as well as averages
# or aggregates over a time interval. Check the data type documentation to
# determine which is the case for a particular data type. Data points always
# contain one value for each field of the data type.
class DataPoint
include Google::Apis::Core::Hashable
# DO NOT USE THIS FIELD. It is ignored, and not stored.
# Corresponds to the JSON property `computationTimeMillis`
# @return [Fixnum]
attr_accessor :computation_time_millis
# The data type defining the format of the values in this data point.
# Corresponds to the JSON property `dataTypeName`
# @return [String]
attr_accessor :data_type_name
# The end time of the interval represented by this data point, in nanoseconds
# since epoch.
# Corresponds to the JSON property `endTimeNanos`
# @return [Fixnum]
attr_accessor :end_time_nanos
# Indicates the last time this data point was modified. Useful only in contexts
# where we are listing the data changes, rather than representing the current
# state of the data.
# Corresponds to the JSON property `modifiedTimeMillis`
# @return [Fixnum]
attr_accessor :modified_time_millis
# If the data point is contained in a dataset for a derived data source, this
# field will be populated with the data source stream ID that created the data
# point originally. WARNING: do not rely on this field for anything other than
# debugging. The value of this field, if it is set at all, is an implementation
# detail and is not guaranteed to remain consistent.
# Corresponds to the JSON property `originDataSourceId`
# @return [String]
attr_accessor :origin_data_source_id
# The raw timestamp from the original SensorEvent.
# Corresponds to the JSON property `rawTimestampNanos`
# @return [Fixnum]
attr_accessor :raw_timestamp_nanos
# The start time of the interval represented by this data point, in nanoseconds
# since epoch.
# Corresponds to the JSON property `startTimeNanos`
# @return [Fixnum]
attr_accessor :start_time_nanos
# Values of each data type field for the data point. It is expected that each
# value corresponding to a data type field will occur in the same order that the
# field is listed with in the data type specified in a data source. Only one of
# integer and floating point fields will be populated, depending on the format
# enum value within data source's type field.
# Corresponds to the JSON property `value`
# @return [Array<Google::Apis::FitnessV1::Value>]
attr_accessor :value
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@computation_time_millis = args[:computation_time_millis] if args.key?(:computation_time_millis)
@data_type_name = args[:data_type_name] if args.key?(:data_type_name)
@end_time_nanos = args[:end_time_nanos] if args.key?(:end_time_nanos)
@modified_time_millis = args[:modified_time_millis] if args.key?(:modified_time_millis)
@origin_data_source_id = args[:origin_data_source_id] if args.key?(:origin_data_source_id)
@raw_timestamp_nanos = args[:raw_timestamp_nanos] if args.key?(:raw_timestamp_nanos)
@start_time_nanos = args[:start_time_nanos] if args.key?(:start_time_nanos)
@value = args[:value] if args.key?(:value)
end
end
# Definition of a unique source of sensor data. Data sources can expose raw data
# coming from hardware sensors on local or companion devices. They can also
# expose derived data, created by transforming or merging other data sources.
# Multiple data sources can exist for the same data type. Every data point
# inserted into or read from this service has an associated data source. The
# data source contains enough information to uniquely identify its data,
# including the hardware device and the application that collected and/or
# transformed the data. It also holds useful metadata, such as the hardware and
# application versions, and the device type. Each data source produces a unique
# stream of data, with a unique identifier. Not all changes to data source
# affect the stream identifier, so that data collected by updated versions of
# the same application/device can still be considered to belong to the same data
# stream.
class DataSource
include Google::Apis::Core::Hashable
# Information about an application which feeds sensor data into the platform.
# Corresponds to the JSON property `application`
# @return [Google::Apis::FitnessV1::Application]
attr_accessor :application
# DO NOT POPULATE THIS FIELD. It is never populated in responses from the
# platform, and is ignored in queries. It will be removed in a future version
# entirely.
# Corresponds to the JSON property `dataQualityStandard`
# @return [Array<String>]
attr_accessor :data_quality_standard
# A unique identifier for the data stream produced by this data source. The
# identifier includes: - The physical device's manufacturer, model, and serial
# number (UID). - The application's package name or name. Package name is used
# when the data source was created by an Android application. The developer
# project number is used when the data source was created by a REST client. -
# The data source's type. - The data source's stream name. Note that not all
# attributes of the data source are used as part of the stream identifier. In
# particular, the version of the hardware/the application isn't used. This
# allows us to preserve the same stream through version updates. This also means
# that two DataSource objects may represent the same data stream even if they're
# not equal. The exact format of the data stream ID created by an Android
# application is: type:dataType.name:application.packageName:device.manufacturer:
# device.model:device.uid:dataStreamName The exact format of the data stream ID
# created by a REST client is: type:dataType.name:developer project number:
# device.manufacturer:device.model:device.uid:dataStreamName When any of the
# optional fields that make up the data stream ID are absent, they will be
# omitted from the data stream ID. The minimum viable data stream ID would be:
# type:dataType.name:developer project number Finally, the developer project
# number and device UID are obfuscated when read by any REST or Android client
# that did not create the data source. Only the data source creator will see the
# developer project number in clear and normal form. This means a client will
# see a different set of data_stream_ids than another client with different
# credentials.
# Corresponds to the JSON property `dataStreamId`
# @return [String]
attr_accessor :data_stream_id
# The stream name uniquely identifies this particular data source among other
# data sources of the same type from the same underlying producer. Setting the
# stream name is optional, but should be done whenever an application exposes
# two streams for the same data type, or when a device has two equivalent
# sensors.
# Corresponds to the JSON property `dataStreamName`
# @return [String]
attr_accessor :data_stream_name
# The data type defines the schema for a stream of data being collected by,
# inserted into, or queried from the Fitness API.
# Corresponds to the JSON property `dataType`
# @return [Google::Apis::FitnessV1::DataType]
attr_accessor :data_type
# Representation of an integrated device (such as a phone or a wearable) that
# can hold sensors. Each sensor is exposed as a data source. The main purpose of
# the device information contained in this class is to identify the hardware of
# a particular data source. This can be useful in different ways, including: -
# Distinguishing two similar sensors on different devices (the step counter on
# two nexus 5 phones, for instance) - Display the source of data to the user (by
# using the device make / model) - Treat data differently depending on sensor
# type (accelerometers on a watch may give different patterns than those on a
# phone) - Build different analysis models for each device/version.
# Corresponds to the JSON property `device`
# @return [Google::Apis::FitnessV1::Device]
attr_accessor :device
# An end-user visible name for this data source.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# A constant describing the type of this data source. Indicates whether this
# data source produces raw or derived data.
# Corresponds to the JSON property `type`
# @return [String]
attr_accessor :type
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@application = args[:application] if args.key?(:application)
@data_quality_standard = args[:data_quality_standard] if args.key?(:data_quality_standard)
@data_stream_id = args[:data_stream_id] if args.key?(:data_stream_id)
@data_stream_name = args[:data_stream_name] if args.key?(:data_stream_name)
@data_type = args[:data_type] if args.key?(:data_type)
@device = args[:device] if args.key?(:device)
@name = args[:name] if args.key?(:name)
@type = args[:type] if args.key?(:type)
end
end
#
class DataType
include Google::Apis::Core::Hashable
# A field represents one dimension of a data type.
# Corresponds to the JSON property `field`
# @return [Array<Google::Apis::FitnessV1::DataTypeField>]
attr_accessor :field
# Each data type has a unique, namespaced, name. All data types in the com.
# google namespace are shared as part of the platform.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@field = args[:field] if args.key?(:field)
@name = args[:name] if args.key?(:name)
end
end
# In case of multi-dimensional data (such as an accelerometer with x, y, and z
# axes) each field represents one dimension. Each data type field has a unique
# name which identifies it. The field also defines the format of the data (int,
# float, etc.). This message is only instantiated in code and not used for wire
# comms or stored in any way.
class DataTypeField
include Google::Apis::Core::Hashable
# The different supported formats for each field in a data type.
# Corresponds to the JSON property `format`
# @return [String]
attr_accessor :format
# Defines the name and format of data. Unlike data type names, field names are
# not namespaced, and only need to be unique within the data type.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
#
# Corresponds to the JSON property `optional`
# @return [Boolean]
attr_accessor :optional
alias_method :optional?, :optional
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@format = args[:format] if args.key?(:format)
@name = args[:name] if args.key?(:name)
@optional = args[:optional] if args.key?(:optional)
end
end
# A dataset represents a projection container for data points. They do not carry
# any info of their own. Datasets represent a set of data points from a
# particular data source. A data point can be found in more than one dataset.
class Dataset
include Google::Apis::Core::Hashable
# The data stream ID of the data source that created the points in this dataset.
# Corresponds to the JSON property `dataSourceId`
# @return [String]
attr_accessor :data_source_id
# The largest end time of all data points in this possibly partial
# representation of the dataset. Time is in nanoseconds from epoch. This should
# also match the second part of the dataset identifier.
# Corresponds to the JSON property `maxEndTimeNs`
# @return [Fixnum]
attr_accessor :max_end_time_ns
# The smallest start time of all data points in this possibly partial
# representation of the dataset. Time is in nanoseconds from epoch. This should
# also match the first part of the dataset identifier.
# Corresponds to the JSON property `minStartTimeNs`
# @return [Fixnum]
attr_accessor :min_start_time_ns
# This token will be set when a dataset is received in response to a GET request
# and the dataset is too large to be included in a single response. Provide this
# value in a subsequent GET request to return the next page of data points
# within this dataset.
# Corresponds to the JSON property `nextPageToken`
# @return [String]
attr_accessor :next_page_token
# A partial list of data points contained in the dataset, ordered by
# endTimeNanos. This list is considered complete when retrieving a small dataset
# and partial when patching a dataset or retrieving a dataset that is too large
# to include in a single response.
# Corresponds to the JSON property `point`
# @return [Array<Google::Apis::FitnessV1::DataPoint>]
attr_accessor :point
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data_source_id = args[:data_source_id] if args.key?(:data_source_id)
@max_end_time_ns = args[:max_end_time_ns] if args.key?(:max_end_time_ns)
@min_start_time_ns = args[:min_start_time_ns] if args.key?(:min_start_time_ns)
@next_page_token = args[:next_page_token] if args.key?(:next_page_token)
@point = args[:point] if args.key?(:point)
end
end
# Representation of an integrated device (such as a phone or a wearable) that
# can hold sensors. Each sensor is exposed as a data source. The main purpose of
# the device information contained in this class is to identify the hardware of
# a particular data source. This can be useful in different ways, including: -
# Distinguishing two similar sensors on different devices (the step counter on
# two nexus 5 phones, for instance) - Display the source of data to the user (by
# using the device make / model) - Treat data differently depending on sensor
# type (accelerometers on a watch may give different patterns than those on a
# phone) - Build different analysis models for each device/version.
class Device
include Google::Apis::Core::Hashable
# Manufacturer of the product/hardware.
# Corresponds to the JSON property `manufacturer`
# @return [String]
attr_accessor :manufacturer
# End-user visible model name for the device.
# Corresponds to the JSON property `model`
# @return [String]
attr_accessor :model
# A constant representing the type of the device.
# Corresponds to the JSON property `type`
# @return [String]
attr_accessor :type
# The serial number or other unique ID for the hardware. This field is
# obfuscated when read by any REST or Android client that did not create the
# data source. Only the data source creator will see the uid field in clear and
# normal form. The obfuscation preserves equality; that is, given two IDs, if
# id1 == id2, obfuscated(id1) == obfuscated(id2).
# Corresponds to the JSON property `uid`
# @return [String]
attr_accessor :uid
# Version string for the device hardware/software.
# Corresponds to the JSON property `version`
# @return [String]
attr_accessor :version
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@manufacturer = args[:manufacturer] if args.key?(:manufacturer)
@model = args[:model] if args.key?(:model)
@type = args[:type] if args.key?(:type)
@uid = args[:uid] if args.key?(:uid)
@version = args[:version] if args.key?(:version)
end
end
#
class ListDataPointChangesResponse
include Google::Apis::Core::Hashable
# The data stream ID of the data source with data point changes.
# Corresponds to the JSON property `dataSourceId`
# @return [String]
attr_accessor :data_source_id
# Deleted data points for the user. Note, for modifications this should be
# parsed before handling insertions.
# Corresponds to the JSON property `deletedDataPoint`
# @return [Array<Google::Apis::FitnessV1::DataPoint>]
attr_accessor :deleted_data_point
# Inserted data points for the user.
# Corresponds to the JSON property `insertedDataPoint`
# @return [Array<Google::Apis::FitnessV1::DataPoint>]
attr_accessor :inserted_data_point
# The continuation token, which is used to page through large result sets.
# Provide this value in a subsequent request to return the next page of results.
# Corresponds to the JSON property `nextPageToken`
# @return [String]
attr_accessor :next_page_token
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data_source_id = args[:data_source_id] if args.key?(:data_source_id)
@deleted_data_point = args[:deleted_data_point] if args.key?(:deleted_data_point)
@inserted_data_point = args[:inserted_data_point] if args.key?(:inserted_data_point)
@next_page_token = args[:next_page_token] if args.key?(:next_page_token)
end
end
#
class ListDataSourcesResponse
include Google::Apis::Core::Hashable
# A previously created data source.
# Corresponds to the JSON property `dataSource`
# @return [Array<Google::Apis::FitnessV1::DataSource>]
attr_accessor :data_source
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@data_source = args[:data_source] if args.key?(:data_source)
end
end
#
class ListSessionsResponse
include Google::Apis::Core::Hashable
# If includeDeleted is set to true in the request, and startTime and endTime are
# omitted, this will include sessions which were deleted since the last sync.
# Corresponds to the JSON property `deletedSession`
# @return [Array<Google::Apis::FitnessV1::Session>]
attr_accessor :deleted_session
# Flag to indicate server has more data to transfer. DO NOT USE THIS FIELD. It
# is never populated in responses from the server.
# Corresponds to the JSON property `hasMoreData`
# @return [Boolean]
attr_accessor :has_more_data
alias_method :has_more_data?, :has_more_data
# The sync token which is used to sync further changes. This will only be
# provided if both startTime and endTime are omitted from the request.
# Corresponds to the JSON property `nextPageToken`
# @return [String]
attr_accessor :next_page_token
# Sessions with an end time that is between startTime and endTime of the request.
# Corresponds to the JSON property `session`
# @return [Array<Google::Apis::FitnessV1::Session>]
attr_accessor :session
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@deleted_session = args[:deleted_session] if args.key?(:deleted_session)
@has_more_data = args[:has_more_data] if args.key?(:has_more_data)
@next_page_token = args[:next_page_token] if args.key?(:next_page_token)
@session = args[:session] if args.key?(:session)
end
end
# Holder object for the value of an entry in a map field of a data point. A map
# value supports a subset of the formats that the regular Value supports.
class MapValue
include Google::Apis::Core::Hashable
# Floating point value.
# Corresponds to the JSON property `fpVal`
# @return [Float]
attr_accessor :fp_val
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@fp_val = args[:fp_val] if args.key?(:fp_val)
end
end
# Sessions contain metadata, such as a user-friendly name and time interval
# information.
class Session
include Google::Apis::Core::Hashable
# Session active time. While start_time_millis and end_time_millis define the
# full session time, the active time can be shorter and specified by
# active_time_millis. If the inactive time during the session is known, it
# should also be inserted via a com.google.activity.segment data point with a
# STILL activity value
# Corresponds to the JSON property `activeTimeMillis`
# @return [Fixnum]
attr_accessor :active_time_millis
# The type of activity this session represents.
# Corresponds to the JSON property `activityType`
# @return [Fixnum]
attr_accessor :activity_type
# The application that created the session.
# Corresponds to the JSON property `application`
# @return [Google::Apis::FitnessV1::Application]
attr_accessor :application
# A description for this session.
# Corresponds to the JSON property `description`
# @return [String]
attr_accessor :description
# An end time, in milliseconds since epoch, inclusive.
# Corresponds to the JSON property `endTimeMillis`
# @return [Fixnum]
attr_accessor :end_time_millis
# A client-generated identifier that is unique across all sessions owned by this
# particular user.
# Corresponds to the JSON property `id`
# @return [String]
attr_accessor :id
# A timestamp that indicates when the session was last modified.
# Corresponds to the JSON property `modifiedTimeMillis`
# @return [Fixnum]
attr_accessor :modified_time_millis
# A human readable name of the session.
# Corresponds to the JSON property `name`
# @return [String]
attr_accessor :name
# A start time, in milliseconds since epoch, inclusive.
# Corresponds to the JSON property `startTimeMillis`
# @return [Fixnum]
attr_accessor :start_time_millis
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@active_time_millis = args[:active_time_millis] if args.key?(:active_time_millis)
@activity_type = args[:activity_type] if args.key?(:activity_type)
@application = args[:application] if args.key?(:application)
@description = args[:description] if args.key?(:description)
@end_time_millis = args[:end_time_millis] if args.key?(:end_time_millis)
@id = args[:id] if args.key?(:id)
@modified_time_millis = args[:modified_time_millis] if args.key?(:modified_time_millis)
@name = args[:name] if args.key?(:name)
@start_time_millis = args[:start_time_millis] if args.key?(:start_time_millis)
end
end
# Holder object for the value of a single field in a data point. A field value
# has a particular format and is only ever set to one of an integer or a
# floating point value.
class Value
include Google::Apis::Core::Hashable
# Floating point value. When this is set, other values must not be set.
# Corresponds to the JSON property `fpVal`
# @return [Float]
attr_accessor :fp_val
# Integer value. When this is set, other values must not be set.
# Corresponds to the JSON property `intVal`
# @return [Fixnum]
attr_accessor :int_val
# Map value. The valid key space and units for the corresponding value of each
# entry should be documented as part of the data type definition. Keys should be
# kept small whenever possible. Data streams with large keys and high data
# frequency may be down sampled.
# Corresponds to the JSON property `mapVal`
# @return [Array<Google::Apis::FitnessV1::ValueMapValEntry>]
attr_accessor :map_val
# String value. When this is set, other values must not be set. Strings should
# be kept small whenever possible. Data streams with large string values and
# high data frequency may be down sampled.
# Corresponds to the JSON property `stringVal`
# @return [String]
attr_accessor :string_val
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@fp_val = args[:fp_val] if args.key?(:fp_val)
@int_val = args[:int_val] if args.key?(:int_val)
@map_val = args[:map_val] if args.key?(:map_val)
@string_val = args[:string_val] if args.key?(:string_val)
end
end
#
class ValueMapValEntry
include Google::Apis::Core::Hashable
#
# Corresponds to the JSON property `key`
# @return [String]
attr_accessor :key
# Holder object for the value of an entry in a map field of a data point. A map
# value supports a subset of the formats that the regular Value supports.
# Corresponds to the JSON property `value`
# @return [Google::Apis::FitnessV1::MapValue]
attr_accessor :value
def initialize(**args)
update!(**args)
end
# Update properties of this object
def update!(**args)
@key = args[:key] if args.key?(:key)
@value = args[:value] if args.key?(:value)
end
end
end
end
end