Backport #29069
The old code `GetTemplatesFromDefaultBranch(...) ([]*api.IssueTemplate,
map[string]error)` doesn't really follow Golang's habits, then the
second returned value might be misused. For example, the API function
`GetIssueTemplates` incorrectly checked the second returned value and
always responds 500 error.
This PR refactors GetTemplatesFromDefaultBranch to
ParseTemplatesFromDefaultBranch and clarifies its behavior, and fixes
the API endpoint bug, and adds some tests.
And by the way, add proper prefix `X-` for the header generated in
`checkDeprecatedAuthMethods`, because non-standard HTTP headers should
have `X-` prefix, and it is also consistent with the new code in
`GetIssueTemplates`
Backport #29050 by wxiaoguang
Try to improve #28949
1. Make `ctx.Data["ShowOutdatedComments"] = true` by default: it brings
consistent user experience, and sometimes the "outdated (source
changed)" comments are still valuable.
2. Show a friendly message if the comment won't show, then the end users
won't fell that "the comment disappears" (it is the special case when
`ShowOutdatedComments = false`)
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Backport #29039 by wxiaoguang
Follow #28654
The `comments` might be empty, so the templates shouldn't (and couldn't)
use it to render. When there is no comment, the UI should also be
updated to empty, so returning an empty body is good enough.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Backport #28942 by @Zettat123
In #28691, schedule plans will be deleted when a repo's actions unit is
disabled. But when the unit is enabled, the schedule plans won't be
created again.
This PR fixes the bug. The schedule plans will be created again when the
actions unit is re-enabled
---------
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Backport #28935 by @silverwind
The `ToUTF8*` functions were stripping BOM, while BOM is actually valid
in UTF8, so the stripping must be optional depending on use case. This
does:
- Add a options struct to all `ToUTF8*` functions, that by default will
strip BOM to preserve existing behaviour
- Remove `ToUTF8` function, it was dead code
- Rename `ToUTF8WithErr` to `ToUTF8`
- Preserve BOM in Monaco Editor
- Remove a unnecessary newline in the textarea value. Browsers did
ignore it, it seems but it's better not to rely on this behaviour.
Fixes: https://github.com/go-gitea/gitea/issues/28743
Related: https://github.com/go-gitea/gitea/issues/6716 which seems to
have once introduced a mechanism that strips and re-adds the BOM, but
from what I can tell, this mechanism was removed at some point after
that PR.
Co-authored-by: silverwind <me@silverwind.io>
Backport #28905 by @Anthony-Jhoiro
Currently, the `updateMirror` function which update the mirror interval
and enable prune properties is only executed by the `Edit` function. But
it is only triggered if `opts.MirrorInterval` is not null, even if
`opts.EnablePrune` is not null.
With this patch, it is now possible to update the enable_prune property
with a patch request without modifying the mirror_interval.
## Example request with httpie
### Currently:
**Does nothing**
```bash
http PATCH https://gitea.your-server/api/v1/repos/myOrg/myRepo "enable_prune:=false" -A bearer -a $gitea_token
```
**Updates both properties**
```bash
http PATCH https://gitea.your-server/api/v1/repos/myOrg/myRepo "enable_prune:=false" "mirror_interval=10m" -A bearer -a $gitea_token
```
### With the patch
**Updates enable_prune only**
```bash
http PATCH https://gitea.your-server/api/v1/repos/myOrg/myRepo "enable_prune:=false" -A bearer -a $gitea_token
```
Co-authored-by: Anthony Quéré <47711333+Anthony-Jhoiro@users.noreply.github.com>
Backport https://github.com/go-gitea/gitea/pull/28726 by @fuxiaohei
Fix Uploaded artifacts should be overwritten
https://github.com/go-gitea/gitea/issues/28549
When upload different content to uploaded artifact, it checks that
content size is not match in db record with previous artifact size, then
the new artifact is refused.
Now if it finds uploading content size is not matching db record when
receiving chunks, it updates db records to follow the latest size value.
Backport #28877 by @KN4CK3R
Fixes#28875
If `RequireSignInView` is enabled, the ghost user has no access rights.
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Backport #26745Fixes#26548
This PR refactors the rendering of markup links. The old code uses
`strings.Replace` to change some urls while the new code uses more
context to decide which link should be generated.
The added tests should ensure the same output for the old and new
behaviour (besides the bug).
We may need to refactor the rendering a bit more to make it clear how
the different helper methods render the input string. There are lots of
options (resolve links / images / mentions / git hashes / emojis / ...)
but you don't really know what helper uses which options. For example,
we currently support images in the user description which should not be
allowed I think:
<details>
<summary>Profile</summary>
https://try.gitea.io/KN4CK3R
</details>
Backport #28140 by @earl-warren
- Make use of the `form-fetch-action` for the merge button, which will
automatically prevent the action from happening multiple times and show
a nice loading indicator as user feedback while the merge request is
being processed by the server.
- Adjust the merge PR code to JSON response as this is required for the
`form-fetch-action` functionality.
- Resolves https://codeberg.org/forgejo/forgejo/issues/774
- Likely resolves the cause of
https://codeberg.org/forgejo/forgejo/issues/1688#issuecomment-1313044
(cherry picked from commit 4ec64c19507caefff7ddaad722b1b5792b97cc5a)
Co-authored-by: Earl Warren <109468362+earl-warren@users.noreply.github.com>
Co-authored-by: Gusted <postmaster@gusted.xyz>
Fix#28157
Backport #28691
This PR fix the possible bugs about actions schedule.
- Move `UpdateRepositoryUnit` and `SetRepoDefaultBranch` from models to
service layer
- Remove schedules plan from database and cancel waiting & running
schedules tasks in this repository when actions unit has been disabled
or global disabled.
- Remove schedules plan from database and cancel waiting & running
schedules tasks in this repository when default branch changed.
Backport #27736 by @lng2020
Fix#27722Fix#27357Fix#25837Fix#28732
1. Fix the typo `BlockingByDependenciesNotPermitted`, which causes the
`not permitted message` not to show. The correct one is `Blocking` or
`BlockedBy`
2. Rewrite the perm check. The perm check uses a very tricky way to
avoid duplicate checks for a slice of issues, which is confusing. In
fact, it's also the reason causing the bug. It uses `lastRepoID` and
`lastPerm` to avoid duplicate checks, but forgets to assign the
`lastPerm` at the end of the code block. So I rewrote this to avoid this
trick.
3. It also reuses the `blocks` slice, which is even more confusing. So I
rewrote this too.
Co-authored-by: Nanguan Lin <70063547+lng2020@users.noreply.github.com>
Backport #28765 by @jackHay22
Fixes #28756
## Changes
- Require and check API token for `GET
/repos/{owner}/{repo}/subscription` in order to populate `ctx.Doer`.
Co-authored-by: Jack Hay <jack@allspice.io>
Backport #28531 by @pulltheflower
- Fix the bug about admin/hooks API that `GET /admin/hooks` can only
fetch system_hooks, `POST /admin/hooks` can only create default_hooks.
Co-authored-by: vincent <38434877+pulltheflower@users.noreply.github.com>
Backport #28587, the only conflict is the test file.
The CORS code has been unmaintained for long time, and the behavior is
not correct.
This PR tries to improve it. The key point is written as comment in
code. And add more tests.
Fix#28515Fix#27642Fix#17098
Backport #28583 by @morphelinho
Follow #28184
Follow #28515
Fix problem with 405 method not allowed for CORS wrt OIDC
Co-authored-by: morphelinho <morphelinho@users.noreply.github.com>
Backport #28555 by @fuxiaohei
Related to https://github.com/go-gitea/gitea/issues/28279
When merging artifact chunks, it lists chunks from storage. When storage
is minio, chunk's path contains `MINIO_BASE_PATH` that makes merging
break.
<del>So trim the `MINIO_BASE_PATH` when handle chunks.</del>
Update the chunk file's basename to retain necessary information. It
ensures that the directory in the chunk's path remains unaffected.
Co-authored-by: FuXiaoHei <fuxiaohei@vip.qq.com>
Backport #28491 by @appleboy
- Modify the `Password` field in `CreateUserOption` struct to remove the
`Required` tag
- Update the `v1_json.tmpl` template to include the `email` field and
remove the `password` field
Signed-off-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Co-authored-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Backport #28457 by @KN4CK3R
Recently Docker started to use the optional `POST /v2/token` endpoint
which should respond with a `404 Not Found` status code instead of the
current `405 Method Not Allowed`.
> Note: Not all token servers implement oauth2. If the request to the
endpoint returns 404 using the HTTP POST method, refer to Token
Documentation for using the HTTP GET method supported by all token
servers.
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Backport #28390 by @jackHay22
## Changes
- Add deprecation warning to `Token` and `AccessToken` authentication
methods in swagger.
- Add deprecation warning header to API response. Example:
```
HTTP/1.1 200 OK
...
Warning: token and access_token API authentication is deprecated
...
```
- Add setting `DISABLE_QUERY_AUTH_TOKEN` to reject query string auth
tokens entirely. Default is `false`
## Next steps
- `DISABLE_QUERY_AUTH_TOKEN` should be true in a subsequent release and
the methods should be removed in swagger
- `DISABLE_QUERY_AUTH_TOKEN` should be removed and the implementation of
the auth methods in question should be removed
## Open questions
- Should there be further changes to the swagger documentation?
Deprecation is not yet supported for security definitions (coming in
[OpenAPI Spec version
3.2.0](https://github.com/OAI/OpenAPI-Specification/issues/2506))
- Should the API router logger sanitize urls that use `token` or
`access_token`? (This is obviously an insufficient solution on its own)
Co-authored-by: Jack Hay <jack@allspice.io>
Co-authored-by: delvh <dev.lh@web.de>
Fix#28056
Backport #28361
This PR will check whether the repo has zero branch when pushing a
branch. If that, it means this repository hasn't been synced.
The reason caused that is after user upgrade from v1.20 -> v1.21, he
just push branches without visit the repository user interface. Because
all repositories routers will check whether a branches sync is necessary
but push has not such check.
For every repository, it has two states, synced or not synced. If there
is zero branch for a repository, then it will be assumed as non-sync
state. Otherwise, it's synced state. So if we think it's synced, we just
need to update branch/insert new branch. Otherwise do a full sync. So
that, for every push, there will be almost no extra load added. It's
high performance than yours.
For the implementation, we in fact will try to update the branch first,
if updated success with affect records > 0, then all are done. Because
that means the branch has been in the database. If no record is
affected, that means the branch does not exist in database. So there are
two possibilities. One is this is a new branch, then we just need to
insert the record. Another is the branches haven't been synced, then we
need to sync all the branches into database.
Backport #28314 by @yp05327
Fix#28264
`DataAsync()` will be called twice.
Caused by https://github.com/go-gitea/gitea/pull/27958.
I'm sorry, I didn't completely remove all unnecessary codes.
Co-authored-by: yp05327 <576951401@qq.com>
Backport #28359 by @lunny
The left menu will only display the default branch's workflows but the
right side will display the runs triggered by all branches' workflows.
So we cannot hide right side if default branch has no workflows.
Fix#28332
Replace #28333
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Backport #28306 by @KN4CK3R
Fixes#28280
Reads the `previous` info from the `git blame` output instead of
calculating it afterwards.
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Backport #28184Fix#25473
Although there was `m.Post("/login/oauth/access_token", CorsHandler()...`,
it never really worked, because it still lacks the "OPTIONS" handler.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Backport #27610 by @evantobin
Fixes#27598
In #27080, the logic for the tokens endpoints were updated to allow
admins to create and view tokens in other accounts. However, the same
functionality was not added to the DELETE endpoint. This PR makes the
DELETE endpoint function the same as the other token endpoints and adds
unit tests
Co-authored-by: Evan Tobin <me@evantob.in>
Backport #27915 by @KN4CK3R
Fixes#27819
We have support for two factor logins with the normal web login and with
basic auth. For basic auth the two factor check was implemented at three
different places and you need to know that this check is necessary. This
PR moves the check into the basic auth itself.
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
wxiaoguang
CEnnis91
Giteabot
Jimmy Praet
FuXiaoHei
KN4CK3R
Lunny Xiao