* Manage port in submodule refurl
Fix#11304
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* URLJoin is causes a cyclic dependency and possibly isn't what what we want anyway
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Protect against leading .. in scp syntax
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
There is an unfortunate signature change with the api.Context
NotFound function; whereas the normal modules/context/Context
NotFound function requires an error or nil, the api.Context
variant will panic with an NPE if a nil is provided.
This PR will allow api.Context.NotFound to tolerate a being
passed a nil.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
* routers: make /compare route available to unauthenticated users
Remove some bits of the compare interface if the user isn't signed in.
Notably, they don't need to see the "New Pull Request" button box nor the
hidden form that would fail to submit due to the POST request continuing to
require proper privileges.
Follow-up commits will improve the UI a bit around this, removing some
"Pull Request" verbiage in favor of "Compare."
* ui: home: show "compare" button for unauthenticated users
This change requires pulling in the BaseRepo unconditionally and
recording if the pull request is in-fact not allowed
(.PullRequestCtx.Allowed). If the user isn't allowed to create a pull
request, either because this isn't a fork or same-fork branch PRs aren't
allowed, then we'll name the button "Compare" instead of "Pull Request."
* ui: branch list: use the new Compare language when available
When viewing the branch listing as an unauthenticated user, you'll get
"Pull Request" buttons. use the new "Compare" verbiage instead, which
matches GitHub behavior when you can't issue a pull request from the
branches.
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Add test
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Restore checkbox rendering and prevent poor sanitization of spans
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Also fix preview context
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Also fix preview context
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Make sure that sendmail processes register with the process manager
* Provide a timeout for these (initially of 5 minutes)
* Add configurable value and tie in to documentation
* Tie in to the admin config page.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Now that emojify.js has been removed, get rid of all instances of has-emoji class that was only used for that. Support for rendering shortcodes should remain in all of these places so it should still work the same.
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lauris BH <lauris@nix.lv>
In #9888, it was reported that my earlier pull request #9075 didn't quite function as expected. I was quite hopeful the `ValuesWithShadow()` worked as expected (and, I thought my testing showed it did) but I guess not. @zeripath proposed an alternative syntax which I like:
```ini
[markup.sanitizer.1]
ELEMENT=a
ALLOW_ATTR=target
REGEXP=something
[markup.sanitizer.2]
ELEMENT=a
ALLOW_ATTR=target
REGEXP=something
```
This was quite easy to adopt into the existing code. I've done so in a semi-backwards-compatible manner:
- The value from `.Value()` is used for each element.
- We parse `[markup.sanitizer]` and all `[markup.sanitizer.*]` sections and add them as rules.
This means that existing configs will load one rule (not all rules). It also means people can use string identifiers (`[markup.sanitiser.KaTeX]`) if they prefer, instead of numbered ones.
Co-authored-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Support unicode emojis and remove emojify.js
This PR replaces all use of emojify.js and adds unicode emoji support to various areas of gitea.
This works in a few ways:
First it adds emoji parsing support into gitea itself. This allows us to
* Render emojis from valid alias (π)
* Detect unicode emojis and let us put them in their own class with proper aria-labels and styling
* Easily allow for custom "emoji"
* Support all emoji rendering and features without javascript
* Uses plain unicode and lets the system render in appropriate emoji font
* Doesn't leave us relying on external sources for updates/fixes/features
That same list of emoji is also used to create a json file which replaces the part of emojify.js that populates the emoji search tribute. This file is about 35KB with GZIP turned on and I've set it to load after the page renders to not hinder page load time (and this removes loading emojify.js also)
For custom "emoji" it uses a pretty simple scheme of just looking for /emojis/img/name.png where name is something a user has put in the "allowed reactions" setting we already have. The gitea reaction that was previously hard coded into a forked copy of emojify.js is included and works as a custom reaction under this method.
The emoji data sourced here is from https://github.com/github/gemoji which is the gem library Github uses for their emoji rendering (and a data source for other sites). So we should be able to easily render any emoji and :alias: that Github can, removing any errors from migrated content. They also update it as well, so we can sync when there are new unicode emoji lists released.
I've included a slimmed down and slightly modified forked copy of https://github.com/knq/emoji to make up our own emoji module. The code is pretty straight forward and again allows us to have a lot of flexibility in what happens.
I had seen a few comments about performance in some of the other threads if we render this ourselves, but there doesn't seem to be any issue here. In a test it can parse, convert, and render 1,000 emojis inside of a large markdown table in about 100ms on my laptop (which is many more emojis than will ever be in any normal issue). This also prevents any flickering and other weirdness from using javascript to render some things while using go for others.
Not included here are image fall back URLS. I don't really think they are necessary for anything new being written in 2020. However, managing the emoji ourselves would allow us to add these as a feature later on if it seems necessary.
Fixes: https://github.com/go-gitea/gitea/issues/9182
Fixes: https://github.com/go-gitea/gitea/issues/8974
Fixes: https://github.com/go-gitea/gitea/issues/8953
Fixes: https://github.com/go-gitea/gitea/issues/6628
Fixes: https://github.com/go-gitea/gitea/issues/5130
* add new shared function emojiHTML
* don't increase emoji size in issue title
* Update templates/repo/issue/view_content/add_reaction.tmpl
Co-Authored-By: 6543 <6543@obermui.de>
* Support for emoji rendering in various templates
* Render code and review comments as they should be
* Better way to handle mail subjects
* insert unicode from tribute selection
* Add template helper for plain text when needed
* Use existing replace function I forgot about
* Don't include emoji greater than Unicode Version 12
Only include emoji and aliases in JSON
* Update build/generate-emoji.go
* Tweak regex slightly to really match everything including random invisible characters. Run tests for every emoji we have
* final updates
* code review
* code review
* hard code gitea custom emoji to match previous behavior
* Update .eslintrc
Co-Authored-By: silverwind <me@silverwind.io>
* disable preempt
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
As seen in trouble shooting #11032 the new feature of Go 1.14 is causing several second delays in startup in certain situations. Debugging shows it spending several seconds handling SIGURG commands during init:
```
6922:04:51.984234 trace init() ./modules/queue/unique_queue_wrapped.go
remote: ) = 69 <0.000012>
remote: [pid 15984] 22:04:51 write(1, "\ttime taken: 236.761\302\265s\n\n", 25 time taken: 236.761Β΅s
remote:
remote: ) = 25 <0.000011>
remote: [pid 15984] 22:04:51 --- SIGURG {si_signo=SIGURG, si_code=SI_TKILL, si_pid=15984, si_uid=0} ---
remote: [pid 15984] 22:04:52 --- SIGURG {si_signo=SIGURG, si_code=SI_TKILL, si_pid=15984, si_uid=0} ---
remote: [pid 15984] 22:04:52 --- SIGURG {si_signo=SIGURG, si_code=SI_TKILL, si_pid=15984, si_uid=0} ---
```
This causes up to 20 seconds added to a push in some cases as it happens for each call of the gitea hook command. This is likely the cause of #10661 as well and would start to effect users once we release 1.12 which would be the first release compiled with Go 1.14. I suspect this is just a slight issue with the upstream implementatation as there have been a few very similar bugs fixed and reported:
https://github.com/golang/go/issues/37741https://github.com/golang/go/issues/37942
We should revisit this in the future and see if a newer version of Go has solved it, but for now disable this option in the environment that gitea hook runs in to avoid it.
* Prevent panic during wrappedConn close at hammertime
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update modules/graceful/server.go
* Fix extraneous debug in goldmark.go
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix checkbox rendering
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Normalize checkbox rendering
Signed-off-by: Andrew Thornton <art27@cantab.net>
* set the checkboxes to readonly instead of disabled
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Add control for the rendering of the frontmatter
* Add control to include a TOC
* Add control to set language - allows control of ToC header and CJK glyph choice.
Signed-off-by: Andrew Thornton art27@cantab.net
* as title, do same changs on action view with #10737
* chage default icon from "invalid type" to "question" , because "invalid type" is not a meaningfull icon type
Signed-off-by: a1012112796 <1012112796@qq.com>
* Use AJAX for notifications table
Signed-off-by: Andrew Thornton <art27@cantab.net>
* move to separate js
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate golangci-lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add autoupdating notification count
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix wipeall
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate tests
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Try hidden
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Try hide and hidden
Signed-off-by: Andrew Thornton <art27@cantab.net>
* More auto-update improvements
Only run checker on pages that have a count
Change starting checker to 10s with a back-off to 60s if there is no change
Signed-off-by: Andrew Thornton <art27@cantab.net>
* string comparison!
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @silverwind
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add configurability as per @6543
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add documentation as per @6543
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Use CSRF header not query
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Further JS improvements
Fix @etzelia update notification table request
Fix @silverwind comments
Co-Authored-By: silverwind <me@silverwind.io>
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Simplify the notification count fns
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: silverwind <me@silverwind.io>
Some OAuth2 providers return quite large structured tokens >32767 bytes.
Gitea currently has a fixed maximum of 32767 bytes for these and
unfortunately due to the convoluted nature of the dependent libraries the
error returned is rather opaque.
Here we manage the error a little better - detecting the rather opaque
github.com/gorilla/securecookie.errEncodedValueTooLong and converting
it to a more readable error.
Further we provide a configurable option to increase the maximum size of
the provided OAuth2 tokens.
Fix#9907
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* First stab at a Gitlab migrations interface.
* Modify JS to show migration for Gitlab
* Properly strip out #gitlab tag from repo name
* Working Gitlab migrations!
Still need to figure out how to hide tokens/etc from showing up in opts.CloneAddr
* Try #2 at trying to hide credentials.
CloneAddr was being used as OriginalURL.
Now passing OriginalURL through from the form and saving it.
* Add go-gitlab dependency
* Vendor go-gitlab
* Use gitlab.BasicAuthClient
Correct CloneURL.
This should be functioning!
Previous commits fixed "Migrated from"
from including the migration credentials.
* Replaced repoPath with repoID globally.
RepoID is grabbed in NewGitlabDownloader
* Logging touchup
* Properly set private repo status.
Properly set milestone deadline time.
Consistently use Gitlab username for 'Name'.
* Add go-gitlab vendor cache
* Fix PR migrations:
- Count of issues is kept to set a non-conflicting PR.ID
- Bool is used to tell whether to fetch Issue or PR comments
* Ensure merged PRs are closed and set with the proper time
* Remove copyright and some commented code
* Rip out '#gitlab' based self-hosted Gitlab support
* Hide given credentials for migrated repos.
CloneAddr was being saved as OriginalURL.
Now passing OriginalURL through from the form and
saving it in it's place
* Use asset.URL directly, no point in parsing.
Opened PRs should fall through to false.
* Fix importing Milestones.
Allow importing using Personal Tokens or anonymous access.
* Fix Gitlab Milestone migration if DueDate isn't set
* Empty Milestone due dates properly return nil, not zero time
* Add GITLAB_READ_TOKEN to drone unit-test step
* Add working gitlab_test.go.
A Personal Access Token, given in env variable GITLAB_READ_TOKEN
is required to run the test.
* Fix linting issues
* Add modified JS files
* Remove pre-build JS files
* Only merged PRs are marged as merged/closed
* Test topics
* Skip test if gitlab is inaccessible
* Grab personal token from username, not password.
Matches Github migration implementation
* Add SetContext() to GitlabDownloader.
* Checking Updated field in Issues.
* Actually fetch Issue Updated time from Gitlab
* Add Gitlab migration GetReviews() stub
* Fix Patch and Clone URLs
* check Updated too
* fix mod
* make vendor with go1.14
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Instead of further handling requests to public which causes issues like #11088, immediately terminate requests to directories js, css, fomantic if no file is found which is checked against a hardcoded list. Maybe there is a way to retrieve the top-level entries below public in a dynamic fashion.
I also added fomantic to the reserved usernames and sorted the list.
Fixes: #11088
* Fix InsertReleases Nil Insert on Attachments
* FIX "No element on slice when insert" & smal refactor
* again
* impruve
* rm useles newline
* Apply suggestions from code review
Co-Authored-By: zeripath <art27@cantab.net>
* process insert as a whole
Co-authored-by: zeripath <art27@cantab.net>
* Update header.tmpl
* Update _repository.less
* Update pull.go
* Update indexer.go
* Update pull.go
* Update pull.go
* Update indexer.go
* fix forked repo doesn't have language stat
* fix forked repo doesn't have language stat
* fix forked repo doesn't have language stat
* fix forked repo doesn't have language stat
* fix forked repo doesn't have language stat
* fix forked repo doesn't have language stat
* fix forked repo doesn't have language stat
* fix forked repo doesn't have language stat
* fix forked repo doesn't have language stat
* fix forked repo doesn't have language stat
* fix forked repo doesn't have language stat
Thanks the advice from lunny and 6543.
* fix forked repo doesn't have language stat
Modified as suggested by 6543.
* fix forked repo doesn't have language stat
simplify the function.
* fix forked repo doesn't have language stat
update the indexer after the loop
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lauris BH <lauris@nix.lv>
* add request review feature in pull request
add a way to notify specific reviewers to review like github , by add or delet a special type
review . The acton is is similar to Assign , so many code reuse the function and items of
Assignee, but the meaning and result is different.
The Permission style is is similar to github, that only writer can add a review request from Reviewers,
but the poster can recall and remove a review request after a reviwer has revied even if he don't have
Write Premission. only manager , the poster and reviewer of a request review can remove it.
The reviewers can be requested to review contain all readers for private repo , for public, contain
all writers and watchers.
The offical Review Request will block merge if Reject can block it.
an other change: add ui otify for Assignees.
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
Signed-off-by: a1012112796 <1012112796@qq.com>
* new change
* add placeholder string
* do some changes follow #10238 to add review requests num on lists also
change icon for review requests to eye
Co-authored-by: Lauris BH <lauris@nix.lv>
* Add `gitea doctor --list` flag to list the checks that will be run, including those by default
* Add `gitea doctor --run` to run specific checks
* Add `gitea doctor --all` to run all checks
* Add db version checker
* Add non-default recalculate merge bases check/fixer to doctor
* Add hook checker (Fix#9878) and ensure hooks are executable (Fix#6319)
* Fix authorized_keys checker - slight change of functionality here because parsing the command is fragile and we should just check if the authorized_keys file is essentially the same as what gitea would produce. (This is still not perfect as order matters - we should probably just md5sum the two files.)
* Add SCRIPT_TYPE check (Fix#10977)
* Add `gitea doctor --fix` to attempt to fix what is possible to easily fix
* Add `gitea doctor --log-file` to set the log-file, be it a file, stdout or to switch off completely. (Fixes previously undetected bug with certain xorm logging configurations - see @6543 comment.)
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add organization wide labels
Implement organization wide labels similar to organization wide
webhooks. This lets you create individual labels for organizations that can be used
for all repos under that organization (so being able to reuse the same
label across multiple repos).
This makes it possible for small organizations with many repos to use
labels effectively.
Fixes#7406
* Add migration
* remove comments
* fix tests
* Update options/locale/locale_en-US.ini
Removed unused translation string
* show org labels in issue search label filter
* Use more clear var name
* rename migration after merge from master
* comment typo
* update migration again after rebase with master
* check for orgID <=0 per guillep2k review
* fmt
* Apply suggestions from code review
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
* remove unused code
* Make sure RepoID is 0 when searching orgID per code review
* more changes/code review requests
* More descriptive translation var per code review
* func description/delete comment when issue label deleted instead of hiding it
* remove comment
* only use issues in that repo when calculating number of open issues for org label on repo label page
* Add integration test for IssuesSearch API with labels
* remove unused function
* Update models/issue_label.go
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Use subquery in GetLabelIDsInReposByNames
* Fix tests to use correct orgID
* fix more tests
* IssuesSearch api now uses new BuildLabelNamesIssueIDsCondition. Add a few more tests as well
* update comment for clarity
* Revert previous code change now that we can use the new BuildLabelNamesIssueIDsCondition
* Don't sort repos by date in IssuesSearch API
After much debugging I've found a strange issue where in some cases MySQL will return a different result than other enigines if a query is sorted by a null collumn. For example with our integration test data where we don't set updated_unix in repository fixtures:
SELECT `id`, `owner_id`, `owner_name`, `lower_name`, `name`, `description`, `website`, `original_service_type`, `original_url`, `default_branch`, `num_watches`, `num_stars`, `num_forks`, `num_issues`, `num_closed_issues`, `num_pulls`, `num_closed_pulls`, `num_milestones`, `num_closed_milestones`, `is_private`, `is_empty`, `is_archived`, `is_mirror`, `status`, `is_fork`, `fork_id`, `is_template`, `template_id`, `size`, `is_fsck_enabled`, `close_issues_via_commit_in_any_branch`, `topics`, `avatar`, `created_unix`, `updated_unix` FROM `repository` ORDER BY updated_unix DESC LIMIT 15 OFFSET 45
Returns different results for MySQL than other engines. However, the similar query:
SELECT `id`, `owner_id`, `owner_name`, `lower_name`, `name`, `description`, `website`, `original_service_type`, `original_url`, `default_branch`, `num_watches`, `num_stars`, `num_forks`, `num_issues`, `num_closed_issues`, `num_pulls`, `num_closed_pulls`, `num_milestones`, `num_closed_milestones`, `is_private`, `is_empty`, `is_archived`, `is_mirror`, `status`, `is_fork`, `fork_id`, `is_template`, `template_id`, `size`, `is_fsck_enabled`, `close_issues_via_commit_in_any_branch`, `topics`, `avatar`, `created_unix`, `updated_unix` FROM `repository` ORDER BY updated_unix DESC LIMIT 15 OFFSET 30
Returns the same results.
This causes integration tests to fail on MySQL in certain cases but would never show up in a real installation. Since this API call always returns issues based on the optionally provided repo_priority_id or the issueID itself, there is no change to results by changing the repo sorting method used to get ids earlier in the function.
* linter is back!
* code review
* remove now unused option
* Fix newline at end of files
* more unused code
* update to master
* check for matching ids before query
* Update models/issue_label.go
Co-Authored-By: 6543 <6543@obermui.de>
* Update models/issue_label.go
* update comments
* Update routers/org/setting.go
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-authored-by: 6543 <6543@obermui.de>
* upgrade golangci-lint to 1.24.0 to allow go 1.14 compatibility
* fix golangci-lint errors
* make make golangci-lint work when out of go-path
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add Matrix webhook
Signed-off-by: Till Faelligen <tfaelligen@gmail.com>
* Add template and related translations for Matrix hook
Signed-off-by: Till Faelligen <tfaelligen@gmail.com>
* Add actual webhook routes and form
Signed-off-by: Till Faelligen <tfaelligen@gmail.com>
* Add missing file
Signed-off-by: Till Faelligen <tfaelligen@gmail.com>
* Update modules/webhook/matrix_test.go
* Use stricter regex to replace URLs
Signed-off-by: Till Faelligen <tfaelligen@gmail.com>
* Escape url and text
Signed-off-by: Till Faelligen <tfaelligen@gmail.com>
* Remove unnecessary whitespace
* Fix copy and paste mistake
Co-Authored-By: Tulir Asokan <tulir@maunium.net>
* Fix indention inconsistency
* Use Authorization header instead of url parameter
* Add raw commit information to webhook
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Tulir Asokan <tulir@maunium.net>
* Handle push rejections and push out-of-date in branch creation and
file upload.
* Remove the duplicated sanitize from services/pull/merge
* Move the errors Err(Merge)PushOutOfDate and ErrPushRejected to
modules/git
* Handle errors better in the upload file dialogs
Fix#10460
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
speed up page generation by making avatar lookup occur at the browser
not at page generation
* Protect against evil email address ".."
* hash the complete email address
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-Authored-By: Lauris BH <lauris@nix.lv>
Annoyingly goldmarks SetAttributeString requires that
the value of the attribute is still a []byte but does
not make it clear in the documentation.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Option to set default branch at repository creation
* Handle template repos with non-default master branch
* Add DefaultBranch handling on creation to API
Fix#9542
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add more logging in the LFS server
Adds more logging in the LFS server and stops sending internal server
error information to the client
* Add LFS Lock cursor implementation
* Simplify Claims in LFS and remove the float64 casts
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Fix panic in API pulls when headbranch does not exist
* refix other reference to plumbing.ErrReferenceNotFound
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Create system webhook column (and migration)
* Create system webhook DB methods
Based on the default webhook ones
* Modify router to handle system webhooks and default ones
* Remove old unused admin nav template
* Adjust orgRepoCtx to differentiate system and default webhook URLs
* Assign IsSystemWebhook when creating webhooks
* Correctly use booleans for IsSystemWebhook
* Use system webhooks when preparing webhooks for payload
* Add UI and locale changes
* Use router params to differentiate admin hook pages
* Fix deleting admin webhooks and rename method
* Add clarity to webhook docs
* Revert "Remove old unused admin nav template"
This reverts commit 191a20a7389fe5f6256b0ad6aafd04b9b0e295c5.
* Rename WebHooksNewPost to GiteaHooksNewPost for clarity
* Reintroduce blank line lost during merge conflict
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Fix task-list checkbox styling
The pandoc renderer will append the class "task-list" to the ul element
wrapping a li with one or more check-boxes. This allows us to select for
them, removing their list-style-type property. However, goldmark and the
gfm spec doesn't specify the "task-list" class name, so we can't use
that to fix the issue there.
Signed-off-by: Alexander Scheel <alexander.m.scheel@gmail.com>
* Update to goldmark v1.1.25
This version adds the missing space after a checkbox.
Resolves: #9656
Signed-off-by: Alexander Scheel <alexander.m.scheel@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
* Display pull request head branch even the branch deleted or repository deleted
* Merge getHeadRepo/loadHeadRepo and getBaseRepo/loadBaseRepo on pull and fill repo when pr.Issue.Repo is available
* retrieve sha from pull head when pull request branch deleted and fix tests
* Fix test
* Ensure MustHeadRepoName returns empty string if no head repo
Co-authored-by: zeripath <art27@cantab.net>
* add API endpoint to create OAuth2 Application.
* move endpoint to /user. Add swagger documentations and proper response type.
* change json tags to snake_case. add CreateOAuth2ApplicationOptions to swagger docs.
* change response status to Created (201)
* add methods to list OAuth2 apps and delete an existing OAuth2 app by ID.
* add APIFormat convert method and file header
* fixed header
* hide secret on oauth2 application list
* add Created time to API response
* add API integration tests for create/list/delete OAuth2 applications.
Co-authored-by: techknowlogick <matti@mdranta.net>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* refactor
* optimize
* remove Iretating function
LoadWatchUsers do not load Users into IW object and it is used only in api ... so move this logic
* remove unessesary
* Apply suggestions from code review
Thx
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
* make Tests more robust
* fix rebase
* restart CI
* CI no dont hit sqlites deadlock
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
Move langauge detection to separate module to be more reusable
Add option to disable vendored file exclusion from file search
Allways show all language stats for search
* Don't manually replace whitespace during render
For historical reasons Gitea manually alters the urlPrefix and replaces
a whitespace with a +. This Works for URLs, but we're also passing
urlPrefix to git calls and adding the + is breaking the tree path.
Goldmark will automatically convert a white space to the proper %20, so
we should leave the string as is which lets us pass it to git unmodified
and then let Goldmark fix it.
Also fixed separate bug in URLJoin I noticed while testing where it will
silently discard sections of a path that have # in them (possibly
others). We should just escape it first.
Fixes 10156
* Escape elems as well
* Revert "Escape elems as well"
This reverts commit 8bf49596fee6fac4d9da256cd1e90a0ec0183671.
* restart ci
* remove changes to URLJoin
* restart ci
Co-authored-by: techknowlogick <matti@mdranta.net>
* add API branch protection endpoint
* lint
* Change to use team names instead of ids.
* Status codes.
* fix
* Fix
* Add new branch protection options (BlockOnRejectedReviews, DismissStaleApprovals, RequireSignedCommits)
* Do xorm query directly
* fix xorm GetUserNamesByIDs
* Add some tests
* Improved GetTeamNamesByID
* http status created for CreateBranchProtection
* Correct status code in integration test
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
* Implementation for calculating language statistics
Impement saving code language statistics to database
Implement rendering langauge stats
Add primary laguage to show in repository list
Implement repository stats indexer queue
Add indexer test
Refactor to use queue module
* Do not timeout for queues
* Upgrade levelqueue to version 0.2.0
This adds functionality for Unique Queues
* Add UniqueQueue interface and functions to create them
* Add UniqueQueue implementations
* Move TestPullRequests over to use UniqueQueue
* Reduce code duplication
* Add bytefifos
* Ensure invalid types are logged
* Fix close race in PersistableChannelQueue Shutdown
* go function contexting is not what you expect
* Apply suggestions from code review
Co-Authored-By: Lauris BH <lauris@nix.lv>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Cache last commit to accelerate the repository directory page visit
* Default use default cache configuration
* add tests for last commit cache
* Simplify last commit cache
* Revert Enabled back
* Change the last commit cache default ttl to 8760h
* Fix test
* Support references ending in , . and ;
* Accept :;, in simple refs; fix 2+ consecutive refs
* Include cross-repository references
* Add ?!, fix spacing problem
* Add doctor check of app.ini paths
* Make /custom dir not mandatory
* Fix message and improve interface
* Update cmd/doctor.go
Co-Authored-By: John Olheiser <42128690+jolheiser@users.noreply.github.com>
* Apaise lint
* Isn't the linter a sweet? (1)
* Isn't the linter a sweet? (2)
* Isn't the linter a sweet?? (3)
* Restart CI
Co-authored-by: John Olheiser <42128690+jolheiser@users.noreply.github.com>
Co-authored-by: zeripath <art27@cantab.net>
* Make WorkerPools and Queues flushable
Adds Flush methods to Queues and the WorkerPool
Further abstracts the WorkerPool
Adds a final step to Flush the queues in the defer from PrintCurrentTest
Fixes an issue with Settings inheritance in queues
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Change to for loop
* Add IsEmpty and begin just making the queues composed WorkerPools
* subsume workerpool into the queues and create a flushable interface
* Add manager command
* Move flushall to queue.Manager and add to testlogger
* As per @guillep2k
* as per @guillep2k
* Just make queues all implement flushable and clean up the wrapped queue flushes
* cope with no timeout
Co-authored-by: Lauris BH <lauris@nix.lv>
* Some refactor on git diff and ignore getting commit information failed on migrating pull request review comments
* fix test
* fix lint
* Change error log to warn
* Only generate bindata if necessary
* Only generate bindata if they are not up-to-date
* generate a hash of the fileinfo and use that to keep up-to-date
* Newer test is redundant
* handle missing bindata and clean
* Only update hash after successful write
* switch to sha1 hash
* Apply suggestions from code review
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* fix pull view when head repository or head branch missed and close related pull requests when delete branch
* fix pull view broken when head repository deleted
* close pull requests when head repositories deleted
* Add tests for broken pull request head repository or branch
* fix typo
* ignore special error when close pull request
Co-authored-by: Lauris BH <lauris@nix.lv>
* fix typo
* Migrate reviews when migrating repository from github
* fix lint
* Added test and migration when external user login
* fix test
* fix commented state
* Some improvements
* fix bug when get pull request and ref original author on code comments
* Fix migrated line; Added comment for review
* Don't load all pull requests attributes
* Fix typo
* wrong change copy head
* fix tests
* fix reactions
* Fix test
* fix fmt
* fix review comment reactions
* Fix wrong hint when status checking is running on pull request view
* fix lint
* fix test
* fix test
* fix wrong tmpl
* fix import
* rename function name
* Add support for database schema
* Require setting search_path for the db user
* Add schema setting to admin/config.tmpl
* Use a schema different from default for psql tests
* Update postgres scripts to use custom schema
* Update to xorm/core 0.7.3 and xorm/xorm c37aff9b3a
* Fix migration test
Co-authored-by: Antoine GIRARD <sapk@users.noreply.github.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Fix wrong permissions check when issues/prs shared operations
* move redirect to the last of the function
* fix swagger
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Make CertFile and KeyFile relative to CustomPath
The current code will absolute CertFile and KeyFile against the current working directory. This is quite unexpected for users. This code makes relative paths absolute against the CustomPath.
Fix#4196
* Improve error reporting when reading certificates
* Apply suggestions from code review
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Add possibility to global disable repo units.
* Add Default Repo Unit app.ini setting.
* Hide units
* Hide disabled repo units
* Minor fixes
* Indicate disabled units in team settings.
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
* ci: configure remaining github limmit
* prepend with github since package is common to all migrations
* add RefreshRate
* Update github.go
* add missing space
* go fmt
* Read env variable GITHUB_READ_TOKEN for token
* Update .drone.yml
* Add require signed commit for protected branch
* Fix fmt
* Make editor show if they will be signed
* bugfix
* Add basic merge check and better information for CRUD
* linting comment
* Add descriptors to merge signing
* Slight refactor
* Slight improvement to appearances
* Handle Merge API
* manage CRUD API
* Move error to error.go
* Remove fix to delete.go
* prep for merge
* need to tolerate \r\n in message
* check protected branch before trying to load it
* Apply suggestions from code review
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
* fix commit-reader
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* introduce GET /notifications/new
* add TEST
* use Sprintf instead of path.Join
* Error more verbose
* return number of notifications if unreaded exist
* 200 http status for available notifications
* Fix missing updated time on migrated issues and comments
* Fix testing and missing updated on migrating pullrequest
Co-authored-by: Antoine GIRARD <sapk@users.noreply.github.com>
* Restricted users (#4334): initial implementation
* Add User.IsRestricted & UI to edit it
* Pass user object instead of user id to places where IsRestricted flag matters
* Restricted users: maintain access rows for all referenced repos (incl public)
* Take logged in user & IsRestricted flag into account in org/repo listings, searches and accesses
* Add basic repo access tests for restricted users
Signed-off-by: Manush Dodunekov <manush@stendahls.se>
* Mention restricted users in the faq
Signed-off-by: Manush Dodunekov <manush@stendahls.se>
* Revert unnecessary change `.isUserPartOfOrg` -> `.IsUserPartOfOrg`
Signed-off-by: Manush Dodunekov <manush@stendahls.se>
* Remove unnecessary `org.IsOrganization()` call
Signed-off-by: Manush Dodunekov <manush@stendahls.se>
* Revert to an `int64` keyed `accessMap`
* Add type `userAccess`
* Add convenience func updateUserAccess()
* Turn accessMap into a `map[int64]userAccess`
Signed-off-by: Manush Dodunekov <manush@stendahls.se>
* or even better: `map[int64]*userAccess`
* updateUserAccess(): use tighter syntax as suggested by lafriks
* even tighter
* Avoid extra loop
* Don't disclose limited orgs to unauthenticated users
* Don't assume block only applies to orgs
* Use an array of `VisibleType` for filtering
* fix yet another thinko
* Ok - no need for u
* Revert "Ok - no need for u"
This reverts commit 5c3e886aabd5acd997a3b35687d322439732c200.
Co-authored-by: Antoine GIRARD <sapk@users.noreply.github.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Delay printing hook statuses until after 1 second
* Move to a 5s delay, wrapped writer structure and add config
* Update cmd/hook.go
* Apply suggestions from code review
* Update cmd/hook.go
Co-authored-by: Antoine GIRARD <sapk@users.noreply.github.com>
* Move push commits from models to modules/repository
* fix test
* fix test
* fix test
* fix test
* fix test
Co-authored-by: zeripath <art27@cantab.net>
* API: orgEditTeam make Fields optional
* add TestCase
* Update integrations/api_team_test.go
* suggestions from lafriks
use len() to check if string is empty
Co-Authored-By: Lauris BH <lauris@nix.lv>
* change ...
* use Where not ID to get mssql
* add return and code format
* fix test
* fix test ... null pointer exept
* update specific colums
* only specific colums too
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Fix#5997.
If a push causes the patch/diff of a PR towards target branch to change, all existing reviews for the PR will be set and shown as stale.
New branch protection option to dismiss stale approvals are added.
To show that a review is not based on the latest PR changes, an hourglass is shown
* Some more e-mail notification fixes
A few more small e-mail notification fixes/changes
* Style footer of notification email to be smaller
* Include text for when pull request is merged
* Don't include original body of issue or PR when merging/closing by
setting issue.Content to "" in these cases
* Set Re: prefix and meessage-ID headers based on actName instead of checking for a
comment. This fixes a bug where certain actions that didn't have a
comment were setting Message-ID instead of In-Reply-To which caused some
mail programs not to show those messages as they would have had the same
Message-ID as a previous message. Also fixes the case where a final
comment and closing message would have been displayed out of order if
you didn't have a copy of the original issue/pr cretion message.
* Update other template footers for consistency
* Move to goldmark
Markdown rendering moved from blackfriday to the goldmark.
Multiple subtle changes required to the goldmark extensions to keep
current rendering and defaults.
Can go further with goldmark linkify and have this work within markdown
rendering making the link processor unnecessary.
Need to think about how to go about allowing extensions - at present it
seems that these would be hard to do without recompilation.
* linter fixes
Co-authored-by: Lauris BH <lauris@nix.lv>
Instead of just adding test generated files to .gitignore prevent
them from being produced in the first place.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* make notifyWatchers work on multiple actions
* more efficient multiple notifyWatchers
* Make CommitRepoAction take advantage of multiple actions
* Batch post and pre-receive results
* Set batch to 30
* Auto adjust timeout & add logging
* adjust processing message
* Add some messages to pre-receive
* Make any non-200 status code from pre-receive an error
* Add missing hookPrintResults
* Remove shortcut for single action
* mistaken merge fix
* oops
* Move master branch to the front
* If repo was empty and the master branch is pushed ensure that that is set as the default branch
* fixup
* fixup
* Missed HookOptions in setdefaultbranch
* Batch PushUpdateAddTag and PushUpdateDelTag
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Wrap the code indexer
In order to prevent a data race in the code indexer it must be wrapped
with a holder otherwise it is possible to Search/Index on an
incompletely initialised indexer, and search will fail with a nil
pointer until the repository indexer is initialised.
Further a completely initialised repository indexer should not be closed
until Termination otherwise actions in Hammer/Shutdown phases could
block or be lost.
Finally, there is a complex dance of shutdown etiquette should the index
initialisation fail. This PR restores that.
* Always return err if closed whilst waiting
Co-authored-by: techknowlogick <matti@mdranta.net>
* Prefix all user-generated IDs in markup
* Add user-content- to IDs in unit-tests
* fixup markdown_test.go
* update the hrefs for the wiki test
* Add blackfriday extension regex
Signed-off-by: jolheiser <john.olheiser@gmail.com>
The minimum key size defaults weren't set as suggested in app.ini.sample
so if you enabled MINIMUM_KEY_SIZE_CHECK it would always fail since
there would be no matching values to check against. This pr adds the
default values that should have been there.
Should fix#9465
* Add ActionCommentPull action
Adds ActionCommentPull action to distinguish between a comment on an
issue and on a pull request
* Update modules/notification/action/action.go
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* use numbers and not http.Status___ enum
* fix test
* add many missing swagger responses
* code format
* Deletion Sould return 204 ...
* error handling improvements
* if special error type ... then add it to swagger too
* one smal nit
* invalidTopicsError is []string
* valid swagger specification 2.0
- if you add responses swagger can tell you if you do it right π
* use ctx.InternalServerError
* Revert "use numbers and not http.Status___ enum"
This reverts commit b1ff386e2418ed6a7f183e756b13277d701278ef.
* use http.Status* enum everywhere
CloneAddr will contain username and password credentials and they will
get stored in system notices about failed migrations (and logs if trace
is set). Replace with OriginalURL that doesn't have those.
* Fix Slack webhook payload title generation to work with Mattermost by using a markdown link instead of html
* Fix Slack webhook attachment title and title link handling
* Sleep longer if request speed is over github limitation
* improve code
* remove unused code
* fix lint
* Use github's rate limit remain value to determine how long to sleep
* Save reset time when finished github api request
* fix bug
* fix lint
* Add context.Context for sleep
* fix test
* improve code
* fix bug and lint
* fix import order
* Remove text from contextual webhooks
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Missed one in Telegram
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Adds functionality to change target branch of created pull requests
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Use const instead of var in JavaScript additions
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Check if branches are equal and if PR already exists before changing target branch
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Make sure to check all commits
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Print error messages for user as error flash message
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Disallow changing target branch of closed or merged pull requests
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Resolve conflicts after merge of upstream/master
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Change order of branch select fields
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Removes duplicate check
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Use ctx.Tr for translations
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Recompile JS
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Use correct translation namespace
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Remove redundant if condition
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Moves most change branch logic into pull service
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Completes comment
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Add Ref to ChangesPayload for logging changed target branches
instead of creating a new struct
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Revert changes to go.mod
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Directly use createComment method
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Return 404 if pull request is not found. Move written check up
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Remove variable declaration
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Return client errors on change pull request target errors
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Return error in commit.HasPreviousCommit
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Adds blank line
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Test patch before persisting new target branch
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Update patch before testing (not working)
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Removes patch calls when changeing pull request target
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Removes unneeded check for base name
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Moves ChangeTargetBranch completely to pull service. Update patch status.
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Set webhook mode after errors were validated
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Update PR in one transaction
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Move logic for check if head is equal with branch to pull model
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Adds missing comment and simplify return
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Adjust CreateComment method call
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Change graceful to use a singleton obtained through GetManager instead of a global.
* Graceful: Make TestPullRequests shutdownable
* Graceful: Make the cron tasks graceful
* Graceful: AddTestPullRequest run in graceful ctx
* Graceful: SyncMirrors shutdown
* Graceful: SetDefaultContext for Xorm to be HammerContext
* Avoid starting graceful for migrate commands and checkout
* Graceful: DeliverHooks now can be shutdown
* Fix multiple syncing errors in modules/sync/UniqueQueue & Make UniqueQueue closable
* Begin the process of making the repo indexer shutdown gracefully
* Refactor
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Add push-create to SSH serv
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Cannot push for another user unless admin
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Get owner in case admin pushes for another user
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Set new repo ID in result
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Update to service and use new org perms
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Move pushCreateRepo to services
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Fix import order
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Changes for @guillep2k
* Check owner (not user) in SSH
* Add basic tests for created repos (private, not empty)
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Default NO_REPLY_ADDRESS to DOMAIN
The default NO_REPLY_ADDRESS was previously noreply.example.org
This PR changes this to default to the default DOMAIN for gitea.
* Change default to noreply.%(DOMAIN)s
* Change default to "noreply" + Domain
* Save patches to temporary files
* Remove SavePatch and generate patches on the fly
* Use ioutil.TempDir
* fixup! Use ioutil.TempDir
* fixup! fixup! Use ioutil.TempDir
* RemoveAll LocalCopyPath() in initIntergrationTest
* Default to status checking on PR creation
* Remove unnecessary set to StatusChecking
* Protect against unable to load repo
* Handle conflicts
* Restore original conflict setting
* In TestPullRequests update status to StatusChecking before running TestPatch
The underlying implementation of os.exec uses channels and goroutines.
It is possible to have time-variant error values returned from Cmd.Wait
depending on which comes first.
Also, the git subcommand and options should be separated tokens.
Fixes a flaky test in modules/git/command_test.go
* reject reactions wich ar not allowed
* dont duble check CreateReaction now throw ErrForbiddenIssueReaction
* add /repos/{owner}/{repo}/issues/comments/{id}/reactions endpoint
* add Find Functions
* fix some swagger stuff + add issue reaction endpoints + GET ReactionList now use FindReactions...
* explicite Issue Only Reaction for FindReactionsOptions with "-1" commentID
* load issue; load user ...
* return error again
* swagger def canged after LINT
* check if user has ben loaded
* add Tests
* better way of comparing results
* add suggestion
* use different issue for test
(dont interfear with integration test)
* test dont compare Location on timeCompare
* TEST: add forbidden dubble add
* add comments in code to explain
* add settings.UI.ReactionsMap
so if !setting.UI.ReactionsMap[opts.Type] works
* Support custom sanitization policy
Allowing the gitea administrator to configure sanitization policy allows
them to couple external renders and custom templates to support more
markup. In particular, the `pandoc` renderer allows generating KaTeX
annotations, wrapping them in `<span>` elements with class `math` and
either `inline` or `display` (depending on whether or not inline or
block mode was requested).
This iteration gives the administrator whitelisting powers; carefully
crafted regexes will thus let through only the desired attributes
necessary to support their custom markup.
Resolves: #9054
Signed-off-by: Alexander Scheel <alexander.m.scheel@gmail.com>
* Document new sanitization configuration
- Adds basic documentation to app.ini.sample,
- Adds an example to the Configuration Cheat Sheet, and
- Adds extended information to External Renderers section.
Signed-off-by: Alexander Scheel <alexander.m.scheel@gmail.com>
* Drop extraneous length check in newMarkupSanitizer(...)
Signed-off-by: Alexander Scheel <alexander.m.scheel@gmail.com>
* Fix plural ELEMENT and ALLOW_ATTR in docs
These were left over from their initial names. Make them singular to
conform with the current expectations.
Signed-off-by: Alexander Scheel <alexander.m.scheel@gmail.com>
* Possibility to not use whitelist but allow anyone with write access
* fix existing test
* rename migration function
* Try to give a better name for migration step
* Clear settings if higher level setting is not set
* Move official reviews to db instead of counting approvals each time
* migration
* fix
* fix migration
* fix migration
* Remove NOT NULL from EnableWhitelist as migration isn't possible
* Fix migration, reviews are connected to issues.
* Fix SQL query issues in GetReviewersByPullID.
* Simplify function GetReviewersByIssueID
* Handle reviewers that has been deleted
* Ensure reviews for test is in a well defined order
* Only clear and set official reviews when it is an approve or reject.
* add [ui] Reactions
* move contend check from form to go functions
* use else if
* check if reaction is allowed only on react
(so previous custom reaction can be still removed)
* use $.AllowedReactions in templates
* use ctx.Flash.Error
* use it there too
* add redirection
* back to server error
because a wrong reaction is a template issue ...
* add emoji list link
* add docs entry
* small wording nit
suggestions from @jolheiser - thx
* same reactions as github
* fix PR reactions
* handle error so template JS could check
* Add Integrations Test
* add REACTIONS setting to cheat-sheet doc page
* Add support for local vs. remote xrefs
* Add doc for references
* Docs: fix cases not currently supported
* One more doc fix
* Doc: mentions for teams and orgs
* Change !num ref concept, no change in functionality
* Fix test
* Improve table of issue reference types
* Fix paragraph mark
* Graceful: Create callbacks to with contexts
* Graceful: Say when Gitea is completely finished
* Graceful: Git and Process within HammerTime
Force all git commands to terminate at HammerTime
Force all process commands to terminate at HammerTime
Move almost all git processes to run as git Commands
* Graceful: Always Hammer after Shutdown
* ProcessManager: Add cancel functionality
* Fix tests
* Make sure that process.Manager.Kill() cancels
* Make threadsafe access to Processes and remove own unused Kill
* Remove cmd from the process manager as it is no longer used
* the default context is the correct context
* get rid of double till
* Add single sign-on support via SSPI on Windows
* Ensure plugins implement interface
* Ensure plugins implement interface
* Move functions used only by the SSPI auth method to sspi_windows.go
* Field SSPISeparatorReplacement of AuthenticationForm should not be required via binding, as binding will insist the field is non-empty even if another login type is selected
* Fix breaking of oauth authentication on download links. Do not create new session with SSPI authentication on download links.
* Update documentation for the new 'SPNEGO with SSPI' login source
* Mention in documentation that ROOT_URL should contain the FQDN of the server
* Make sure that Contexter is not checking for active login sources when the ORM engine is not initialized (eg. when installing)
* Always initialize and free SSO methods, even if they are not enabled, as a method can be activated while the app is running (from Authentication sources)
* Add option in SSPIConfig for removing of domains from logon names
* Update helper text for StripDomainNames option
* Make sure handleSignIn() is called after a new user object is created by SSPI auth method
* Remove default value from text of form field helper
Co-Authored-By: Lauris BH <lauris@nix.lv>
* Remove default value from text of form field helper
Co-Authored-By: Lauris BH <lauris@nix.lv>
* Remove default value from text of form field helper
Co-Authored-By: Lauris BH <lauris@nix.lv>
* Only make a query to the DB to check if SSPI is enabled on handlers that need that information for templates
* Remove code duplication
* Log errors in ActiveLoginSources
Co-Authored-By: Lauris BH <lauris@nix.lv>
* Revert suffix of randomly generated E-mails for Reverse proxy authentication
Co-Authored-By: Lauris BH <lauris@nix.lv>
* Revert unneeded white-space change in template
Co-Authored-By: Lauris BH <lauris@nix.lv>
* Add copyright comments at the top of new files
* Use loopback name for randomly generated emails
* Add locale tag for the SSPISeparatorReplacement field with proper casing
* Revert casing of SSPISeparatorReplacement field in locale file, moving it up, next to other form fields
* Update docs/content/doc/features/authentication.en-us.md
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Remove Priority() method and define the order in which SSO auth methods should be executed in one place
* Log authenticated username only if it's not empty
* Rephrase helper text for automatic creation of users
* Return error if more than one active SSPI auth source is found
* Change newUser() function to return error, letting caller log/handle the error
* Move isPublicResource, isPublicPage and handleSignIn functions outside SSPI auth method to allow other SSO methods to reuse them if needed
* Refactor initialization of the list containing SSO auth methods
* Validate SSPI settings on POST
* Change SSPI to only perform authentication on its own login page, API paths and download links. Leave Toggle middleware to redirect non authenticated users to login page
* Make 'Default language' in SSPI config empty, unless changed by admin
* Show error if admin tries to add a second authentication source of type SSPI
* Simplify declaration of global variable
* Rebuild gitgraph.js on Linux
* Make sure config values containing only whitespace are not accepted
* Add USE_SERVICE_WORKER setting
This will be very useful setting for anyone doing frontend work.
Fixes: https://github.com/go-gitea/gitea/issues/9044
* prevent potential syntax error on old browsers
* Graceful Shutdown for windows and others
Restructures modules/graceful, adding shutdown for windows, removing and
replacing the old minwinsvc code.
Creates a new waitGroup - terminate which allows for goroutines to
finish up after the shutdown of the servers.
Shutdown and terminate hooks are added for goroutines.
* Remove unused functions - these can be added in a different PR
* Add startup timeout functionality
* Document STARTUP_TIMEOUT
* Add team permission setting to allow creating repo in organization.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Add test case for creating repo when have team creation access.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* build error: should omit comparison to bool constant
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Add comment on exported functions
* Fix fixture consistency, fix existing unit tests
* Fix boolean comparison in xorm query.
* addCollaborator and changeCollaborationAccessMode separate steps
More clear to use different if-cases.
* Create and commit xorm session
* fix
* Add information of create repo permission in team sidebar
* Add migration step
* Clarify that repository creator will be administrator.
* Fix some things after merge
* Fix language text that use html
* migrations file
* Create repository permission -> Create repositories
* fix merge
* fix review comments
* Add password requirement info on error
* Move BuildComplexityError to the password pkg
* Unexport complexity type
* Fix extra line
* Update modules/password/password.go
Co-Authored-By: Lauris BH <lauris@nix.lv>
* Add retry for migration http/https requests
* give the more suitable name for retry configuraion items
* fix docs and lint
* Only use retryDownloader when setting > 1
Fix#9001
The GZIP ProxyReponseWriter doesn't currently respond correctly
to requests about its Written status - leading to #9001.
This PR properly reimplements these methods.
* move transfer repository and rename repository on a service package and start action notification
* remove unused codes
* fix lint
* fix bugs
* fix test
* fix test
* fix test
* fix lint
* update go mod and sum
* Update dashboard context for PR reviews
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Update options/locale/locale_en-US.ini
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Only append head action if it has content or is approval/rejection
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Update options/locale/locale_en-US.ini
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
In investigating #7947 it has become clear that the storage component of go-git repositories needs closing.
This PR adds this Close function and adds the Close functions as necessary.
In TransferOwnership the ctx.Repo.GitRepo is closed if it is open to help prevent the risk of multiple open files.
Fixes#7947
* Convert EOL to UNIX-style to render MD properly
* Update modules/markup/markdown/markdown.go
Co-Authored-By: zeripath <art27@cantab.net>
* Fix lint optimization
* Check for empty content before conversion
* Update modules/util/util.go
Co-Authored-By: zeripath <art27@cantab.net>
* Improved checks and tests
* Add paragraph render test
* Improve speed even more, improve tests
* Small improvement by @gary-kim
* Fix test for DOS
* More improvements
* Restart CI
Update all Github migration tests to use a new repo created just for
these tests that won't accidentially be modified by regular users
interacting with issues.
Fixes#8895
This PR migrates temp_repo.go to use git.NewCommand instead creating processes by itself - this fixes the problem underlying PR #8905.
There are other places that run git outside of the controlled locale defined in #8548 but temp_repo.go is the only cause of failure of local testing in cases where English is not the default - implying that error messages from those other commands are not interpreted.
Replaces #8905
* Add support for AUTO_WATCH_ON_CHANGES and AUTO_WATCH_ON_CLONE
* Update models/repo_watch.go
Co-Authored-By: Lauris BH <lauris@nix.lv>
* Round up changes suggested by lafriks
* Added changes suggested from automated tests
* Updated deleteUser to take RepoWatchModeDont into account, corrected inverted DefaultWatchOnClone and DefaultWatchOnChanges behaviour, updated and added tests.
* Reinsert import "github.com/Unknwon/com" on http.go
* Add migration for new column `watch`.`mode`
* Remove serv code
* Remove WATCH_ON_CLONE; use hooks, add integrations
* Renamed watch_test.go to repo_watch_test.go
* Correct fmt
* Add missing EOL
* Correct name of test function
* Reword cheat and ini descriptions
* Add update to migration to ensure column value
* Clarify comment
Co-Authored-By: zeripath <art27@cantab.net>
* Simplify if condition
There are two major components to this PR:
* This PR handles merge and rebase failures from merging a little more nicely with Flash errors rather a 500.
* All git commands are run in the LC_ALL="C" environment to ensure that error messages are in English. This DefaultLocale is defined in a way that if necessary (due to platform weirdness) it can be overridden at build time using LDFLAGS="-X "code.gitea.io/gitea/modules/git.DefaultLocale=C"" with C changed for the locale as necessary.
* Update Github migration test
Earlier today #716 was reopened which updated the modification time for
an old milestone (1.6.0) that we use in testing with the assumption that
it is old and won't change. This breaks all builds now, so remove this
test since we have others that test the same code and this milestone
will likely be updated again as that issue changes etc...
* ci
* Add template capability for issue mail subject
* Remove test string
* Fix trim subject length
* Add comment to template and run make fmt
* Add information for the template
* Rename defaultMailSubject() to fallbackMailSubject()
* General rewrite of the mail template code
* Fix .Doer name
* Use text/template for subject instead of html
* Fix subject Re: prefix
* Fix mail tests
* Fix static templates
* [skip ci] Updated translations via Crowdin
* Expose db.SetMaxOpenConns and allow non MySQL dbs to set conn pool params (#8528)
* Expose db.SetMaxOpenConns and allow other dbs to set their connection params
* Add note about port exhaustion
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Prevent .code-view from overriding font on icon fonts (#8614)
* Correct some outdated statements in the contributing guidelines (#8612)
* More information for drone-cli in CONTRIBUTING.md
* Increases the version of drone-cli to 1.2.0
* Adds a note for the Docker Toolbox on Windows
Signed-off-by: LukBukkit <luk.bukkit@gmail.com>
* Fix the url for the blog repository (now on gitea.com)
Signed-off-by: LukBukkit <luk.bukkit@gmail.com>
* Remove TrN due to lack of lang context
* Redo templates to match previous code
* Fix extra character in template
* Unify PR & Issue tempaltes, fix format
* Remove default subject
* Add template tests
* Fix template
* Remove replaced function
* Provide User as models.User for better consistency
* Add docs
* Fix doc inaccuracies, improve examples
* Change mail footer to math AppName
* Add test for mail subject/body template separation
* Add support for code review comments
* Update docs/content/doc/advanced/mail-templates-us.md
Co-Authored-By: 6543 <24977596+6543@users.noreply.github.com>
* Add field IsAllRepositories to team
* Add AllRepositories to team UI
* Manage team with access to all repositories
* Add field IsAllRepositories to team API
* put backticks around table/column names
* rename IsAllRepositories to IncludesAllRepositories
* do not reload slice if already loaded
* add repo to teams with access to all repositories when changing repo owner
* improve tests for teams with access to all repositories
* Merge branch 'master'
* Change code for adding all repositories
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* fmt after merge
* Change code in API EditTeam similar to EditTeamPost web interface
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Clarify that all repositories will be added
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* All repositories option under Permissions headline
* New setting group 'Repository access'
* Move check IncludeAllRepositories to removeRepository.
* Revert "Move check IncludeAllRepositories to removeRepository." and add comment instead.
This reverts commit 753b7d205be260b8be465b5291a02975a81f3093.
* Clarify help text what options do.
* Handle deadline is zero (to remove deadline)
* Better API documentation for issue deadline.
* Add parameter to unset due date.
* Update pull edit API comment
* Check if file is locked on upload file commit.
* Better user message if file is locked.
* Check lfs lock before creating temporary repository. fix some errors.
* move lines
* Add comment that enabled setting is checked.
* Fix commit expand button to not go to commit link
* Fix message rendering to have correct HTML in result
* Fix check for empty commit message
* Code optimization
* in progress changes for #7405, added ability to add cross-repo dependencies
* removed unused repolink var
* fixed query that was breaking ci tests; fixed check in issue dependency add so that the id of the issue and dependency is checked rather than the indexes
* reverted removal of string in local files becasue these are done via crowdin, not updated manually
* removed 'Select("issue.*")' from getBlockedByDependencies and getBlockingDependencies based on comments in PR review
* changed getBlockedByDependencies and getBlockingDependencies to use a more xorm-like query, also updated the sidebar as a result
* simplified the getBlockingDependencies and getBlockedByDependencies methods; changed the sidebar to show the dependencies in a different format where you can see the name of the repository
* made some changes to the issue view in the dependencies (issue name on top, repo full name on separate line). Change view of issue in the dependency search results (also showing the full repo name on separate line)
* replace call to FindUserAccessibleRepoIDs with SearchRepositoryByName. The former was hardcoded to use isPrivate = false on the repo search, but this code needed it to be true. The SearchRepositoryByName method is used more in the code including on the user's dashboard
* some more tweaks to the layout of the issues when showing dependencies and in the search box when you add new dependencies
* added Name to the RepositoryMeta struct
* updated swagger doc
* fixed total count for link header on SearchIssues
* fixed indentation
* fixed aligment of remove icon on dependencies in issue sidebar
* removed unnecessary nil check (unnecessary because issue.loadRepo is called prior to this block)
* reverting .css change, somehow missed or forgot that less is used
* updated less file and generated css; updated sidebar template with styles to line up delete and issue index
* added ordering to the blocked by/depends on queries
* fixed sorting in issue dependency search and the depends on/blocks views to show issues from the current repo first, then by created date descending; added a "all cross repository dependencies" setting to allow this feature to be turned off, if turned off, the issue dependency search will work the way it did before (restricted to the current repository)
* re-applied my swagger changes after merge
* fixed split string condition in issue search
* changed ALLOW_CROSS_REPOSITORY_DEPENDENCIES description to sound more global than just the issue dependency search; returning 400 in the cross repo issue search api method if not enabled; fixed bug where the issue count did not respect the state parameter
* when adding a dependency to an issue, added a check to make sure the issue and dependency are in the same repo if cross repo dependencies is not enabled
* updated sortIssuesSession call in PullRequests, another commit moved this method from pull.go to pull_list.go so I had to re-apply my change here
* fixed incorrect setting of user id parameter in search repos call
This PR adds basic repository LFS management UI including the ability to find all possible pointers within the repository. Locks are not managed at present but would be addable through some simple additions.
* Add basic repository lfs management
* add auto-associate function
* Add functionality to find commits with this lfs file
* Add link to find commits on the lfs file view
* Adjust commit view to state the likely branch causing the commit
* Only read Oid from database
* Move some repositories' operations to a standalone service package
* improve code
* remove unused codes
* add rollback when fork failed
* add repo when return
* Send email to assigned user
* Only send mail if enabled
* Mail also when assigned through API
* Need to refactor functions from models to issue service
* Refer to issue index rather than ID
* Disable email notifications completly at initalization if global disable
* Check of user enbled mail shall be in mail notification function only
* Initialize notifications from routers init function.
* Use the assigned comment when sending assigned mail
* Refactor so that assignees always added as separate step when new issue/pr.
* Check error from AddAssignees
* Check if user can be assiged to issue or pull request
* Missing return
* Refactor of CanBeAssigned check.
CanBeAssigned shall have same check as UI.
* Clarify function names (toggle rather than update/change), and clean up.
* Fix review comments.
* Flash error if assignees was not added when creating issue/pr
* Generate error if assignee users doesn't exist
* Only attempt to kill parent once
* Apply suggestions from code review
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Add waitgroup for running servers
* static url
* add cors support for static resources
* [assets] work on the migration to configurable url for assets
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [misc] fix whitespace
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [assets] fix the loading of the manifest.json
It is generated dynamically, and as such can not be served by the cdn.
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* Revert "add cors support for static resources"
This reverts commit 42f964fd181dbb8b139808b9be623470d4f0e40f
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [docs] add the STATIC_URL_PREFIX option
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [docs] reverse-proxy: nginx: add two setups for STATIC_URL_PREFIX
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [assets] migrate the url of a new asset to the static url prefix
REF: f2a3abc683
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* Expose db.SetMaxOpenConns and allow other dbs to set their connection params
* Add note about port exhaustion
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
Add an option to protected branches to add writing deploy keys to the whitelist for pushing.
Please note this is technically a breaking change: previously if the owner of a repository was on the whitelist then any writing deploy key was effectively on the whitelist. This option will now need to be set if that is desired.
Closes#8472
Details:
* Allow Protected Branches to Whitelist Deploy Keys
* Add migration
* Ensure that IsDeployKey is set to false on the http pushes
* add not null default false
* Ensure defaultGPGSettings not nil
* Ensure that coerced commits gain a reference to the repo
* Add warning if trying to get defaultgpgsetting on an unattached commit
* Fix#8582 by handling empty repos
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix tests
Signed-off-by: Jonas Franz <info@jonasfranz.software>
zeripath
Kyle Evans
6543
mrsdizzie
Alexander Scheel
θ΅΅ζΊθΆ
Lunny Xiao
silverwind
Jordan
Cornel
John Olheiser
Lauris BH
L0veSunshine
techknowlogick
j.yao.SUSE
Vasil Mikhalenya
S7evinK
James Lakin
Antoine GIRARD
Gustavo Marin
guillep2k
John Olheiser
David Svantesson
Lars Lehtonen
SpaWn2KiLl
Moritz
Manush Dodunekov
Timon Engelke
Cornel
Brad Albright
Lauris BH
Mario Lubenka
Mura Li
6543
QuaSoft
Koichi MATSUMOTO
Benno
jaqra
Jakob Ackermann
Jonas Franz